aboutsummaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2023-01-20net: mdio: Remove support for building C45 muxed addressesAndrew Lunn1-18/+0
The old way of performing a C45 bus transfer created a special register value and passed it to the MDIO bus driver, in the hope it would see the MII_ADDR_C45 bit set, and perform a C45 transfer. Now that there is a clear separation of C22 and C45, this scheme is no longer used. Remove all the #defines and helpers, to prevent any code being added which tries to use it. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-20bpf: Invalidate slices on destruction of dynptrs on stackKumar Kartikeya Dwivedi1-1/+4
The previous commit implemented destroy_if_dynptr_stack_slot. It destroys the dynptr which given spi belongs to, but still doesn't invalidate the slices that belong to such a dynptr. While for the case of referenced dynptr, we don't allow their overwrite and return an error early, we still allow it and destroy the dynptr for unreferenced dynptr. To be able to enable precise and scoped invalidation of dynptr slices in this case, we must be able to associate the source dynptr of slices that have been obtained using bpf_dynptr_data. When doing destruction, only slices belonging to the dynptr being destructed should be invalidated, and nothing else. Currently, dynptr slices belonging to different dynptrs are indistinguishible. Hence, allocate a unique id to each dynptr (CONST_PTR_TO_DYNPTR and those on stack). This will be stored as part of reg->id. Whenever using bpf_dynptr_data, transfer this unique dynptr id to the returned PTR_TO_MEM_OR_NULL slice pointer, and store it in a new per-PTR_TO_MEM dynptr_id register state member. Finally, after establishing such a relationship between dynptrs and their slices, implement precise invalidation logic that only invalidates slices belong to the destroyed dynptr in destroy_if_dynptr_stack_slot. Acked-by: Joanne Koong <[email protected]> Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-15/+15
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-20Merge tag 'soc-fixes-6.2' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC DT and driver fixes from Arnd Bergmann: "Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms, including: - A regression fix for SDHCI controllers on Inforce 6540, and another SDHCI fix on SM8350 - Reenable cluster idle on sm8250 after the the code fix is upstream - multiple fixes for the QMP PHY binding, needing an incompatible dt change - The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus 6P, to avoid instabilities caused by use of protected memory regions - Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB clock error - A couple of verdin-imx8mm DT fixes for audio playback support - Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees - Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron eMMC CMD8 CRC error in HS400ES/HS400 mode The remaining ARM and RISC-V platforms only have very few smaller dts bugfixes this time: - A fix for the SiFive unmatched board's PCI memory space - A revert to fix a regression with GPIO on Marvell Armada - A fix for the UART address on Marvell AC5 - Missing chip-select phandles for stm32 boards - Selecting the correct clock for the sam9x60 memory controller - Amlogic based Odroid-HC4 needs a revert to restore USB functionality. And finally, there are some minor code fixes: - Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq firmware - memory controller driver fixes for an OMAP regression and older bugs on tegra, atmel and mvebu - reset controller fixes for ti-sci and uniphier platforms - ARM SCMI firmware fixes for a couple of rare corner cases - Qualcomm platform driver fixes for incorrect error handling and a backwards compatibility fix for the apr driver using older dtb - NXP i.MX SoC driver fixes for HDMI output, error handling in the imx8 soc-id and missing reference counting on older cpuid code" * tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits) firmware: zynqmp: fix declarations for gcc-13 ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60 ARM: omap1: fix building gpio15xx ARM: omap1: fix !ARCH_OMAP1_ANY link failures firmware: raspberrypi: Fix type assignment arm64: dts: qcom: msm8992-libra: Fix the memory map arm64: dts: qcom: msm8992: Don't use sfpb mutex PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe() arm64: dts: msm8994-angler: fix the memory map arm64: dts: marvell: AC5/AC5X: Fix address for UART1 ARM: footbridge: drop unnecessary inclusion Revert "ARM: dts: armada-39x: Fix compatible string for gpios" Revert "ARM: dts: armada-38x: Fix compatible string for gpios" ARM: pxa: enable PXA310/PXA320 for DT-only build riscv: dts: sifive: fu740: fix size of pcie 32bit memory soc: qcom: apr: Make qcom,protection-domain optional again ...
2023-01-20Merge tag 'net-6.2-rc5-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bluetooth, bpf and netfilter. Current release - regressions: - Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf", fix nsna_ping mode of team - wifi: mt76: fix bugs in Rx queue handling and DMA mapping - eth: mlx5: - add missing mutex_unlock in error reporter - protect global IPsec ASO with a lock Current release - new code bugs: - rxrpc: fix wrong error return in rxrpc_connect_call() Previous releases - regressions: - bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2 - wifi: - mac80211: fix crashes on Rx due to incorrect initialization of rx->link and rx->link_sta - mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect aggregation handling, crashes - brcmfmac: fix regression for Broadcom PCIe wifi devices - rndis_wlan: prevent buffer overflow in rndis_query_oid - netfilter: conntrack: handle tcp challenge acks during connection reuse - sched: avoid grafting on htb_destroy_class_offload when destroying - virtio-net: correctly enable callback during start_xmit, fix stalls - tcp: avoid the lookup process failing to get sk in ehash table - ipa: disable ipa interrupt during suspend - eth: stmmac: enable all safety features by default Previous releases - always broken: - bpf: - fix pointer-leak due to insufficient speculative store bypass mitigation (Spectre v4) - skip task with pid=1 in send_signal_common() to avoid a splat - fix BPF program ID information in BPF_AUDIT_UNLOAD as well as PERF_BPF_EVENT_PROG_UNLOAD events - fix potential deadlock in htab_lock_bucket from same bucket index but different map_locked index - bluetooth: - fix a buffer overflow in mgmt_mesh_add() - hci_qca: fix driver shutdown on closed serdev - ISO: fix possible circular locking dependency - CIS: hci_event: fix invalid wait context - wifi: brcmfmac: fixes for survey dump handling - mptcp: explicitly specify sock family at subflow creation time - netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits - tcp: fix rate_app_limited to default to 1 - l2tp: close all race conditions in l2tp_tunnel_register() - eth: mlx5: fixes for QoS config and eswitch configuration - eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp() - eth: stmmac: fix invalid call to mdiobus_get_phy() Misc: - ethtool: add netlink attr in rss get reply only if the value is not empty" * tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) Revert "Merge branch 'octeontx2-af-CPT'" tcp: fix rate_app_limited to default to 1 bnxt: Do not read past the end of test names net: stmmac: enable all safety features by default octeontx2-af: add mbox to return CPT_AF_FLT_INT info octeontx2-af: update cpt lf alloc mailbox octeontx2-af: restore rxc conf after teardown sequence octeontx2-af: optimize cpt pf identification octeontx2-af: modify FLR sequence for CPT octeontx2-af: add mbox for CPT LF reset octeontx2-af: recover CPT engine when it gets fault net: dsa: microchip: ksz9477: port map correction in ALU table entry register selftests/net: toeplitz: fix race on tpacket_v3 block close net/ulp: use consistent error code when blocking ULP octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt tcp: avoid the lookup process failing to get sk in ehash table Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf" MAINTAINERS: add networking entries for Willem net: sched: gred: prevent races when adding offloads to stats l2tp: prevent lockdep issue in l2tp_tunnel_register() ...
2023-01-20Input: cros_ec_keyb - add 3 buttons for monitor functionjoewu (吳仲振)1-0/+3
Add 3 extra buttons: 'brightness up', 'brightness down' and 'screen lock' to support monitor manipulating function. Signed-off-by: Joe Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-20ACPI: utils: Add acpi_evaluate_dsm_typed() and acpi_check_dsm() stubsAndy Shevchenko1-0/+15
When the ACPI part of a driver is optional the methods used in it are expected to be available even if CONFIG_ACPI=n. This is not the case for _DSM related methods. Add stubs for acpi_evaluate_dsm_typed() and acpi_check_dsm() methods. Reported-by: kernel test robot <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-20drivers: base: transport_class: fix possible memory leakYang Yingliang1-1/+7
Current some drivers(like iscsi) call transport_register_device() failed, they don't call transport_destroy_device() to release the memory allocated in transport_setup_device(), because they don't know what was done, it should be internal thing to release the resource in register function. So fix this leak by calling destroy function inside register function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-20Merge tag 'archtopo-cacheinfo-updates-6.3' of ↵Greg Kroah-Hartman1-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next Sudeep writes: "cacheinfo and arch_topology updates for v6.3 The main change is to build the cache topology information for all the CPUs from the primary CPU. Currently the cacheinfo for secondary CPUs is created during the early boot on the respective CPU itself. Preemption and interrupts are disabled at this stage. On PREEMPT_RT kernels, allocating memory and even parsing the PPTT table for ACPI based systems triggers a: 'BUG: sleeping function called from invalid context' To prevent this bug, the cacheinfo is now allocated from the primary CPU when preemption and interrupts are enabled and before booting secondary CPUs. The cache levels/leaves are computed from DT/ACPI PPTT information only, without relying on any architecture specific mechanism if done so early. The other minor change included here is to handle shared caches at different levels when not all the CPUs on the system have the same cache hierarchy." * tag 'archtopo-cacheinfo-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels arch_topology: Build cacheinfo from primary CPU ACPI: PPTT: Update acpi_find_last_cache_level() to acpi_get_cache_info() ACPI: PPTT: Remove acpi_find_cache_levels() cacheinfo: Check 'cache-unified' property to count cache leaves cacheinfo: Return error code in init_of_cache_level() cacheinfo: Use RISC-V's init_cache_level() as generic OF implementation
2023-01-20parport_pc: Let chipset drivers mask ECR bits on writesMaciej W. Rozycki1-0/+3
Provide an `ecr_writable' parameter to `__parport_pc_probe_port' so that callers can specify a mask of bits to modify on ECR writes. To avoid the need for separate bit set and bit clear masks always set bit 0 whenever a non-zero mask has been set, as all the currently known cases where a mask is required, that is Oxford Semiconductor devices, do require this bit to be set. If further cases are discovered where the bit is required to be clear, we can update code accordingly, but chances are very low as the bit is supposed to be read-only[1]. Skip ECR probing, which can be problematic as the Oxford Semiconductor OX12PCI840 part has been reported to lock up on setting bit 2, whenever a non-zero mask has been requested by a port subdriver, assuming that the ECR must be there if the subdriver has requested a specific way to access it. References: [1] "Extended Capabilities Port Protocol and ISA Interface Standard", Microsoft Corporation, Revision: 1.14, July 14, 1993, Table 14 "Extended Control Register" Signed-off-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Sudip Mukherjee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-20ASoC: ux500: remove platform_data supportArnd Bergmann1-20/+0
The platform data definition for ux500 sound devices was removed six years ago after the DT conversion was completed, see commit 4b483ed0be8b ("ARM: ux500: cut some platform data"). Remove some leftover bits in the ASoC driver and just assume that it always gets probed using DT. Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-01-20Coresight: Add coresight TPDM source driverMao Jinlong1-0/+1
Add driver to support Coresight device TPDM (Trace, Profiling and Diagnostics Monitor). TPDM is a monitor to collect data from different datasets. This change is to add probe/enable/disable functions for tpdm source. Signed-off-by: Tao Zhang <[email protected]> Signed-off-by: Mao Jinlong <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-20crypto: hisilicon/qm - define the device isolation strategyKai Ye1-0/+15
Define the device isolation strategy by the device driver. The user configures a hardware error threshold value by uacce interface. If the number of hardware errors exceeds the value of setting error threshold in one hour. The device will not be available in user space. The VF device use the PF device isolation strategy. All the hardware errors are processed by PF driver. Signed-off-by: Kai Ye <[email protected]> Acked-by: Herbert Xu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-20uacce: supports device isolation featureKai Ye1-0/+12
UACCE adds the hardware error isolation feature. To improve service reliability, some uacce devices that frequently encounter hardware errors are isolated. Therefore, this feature is added. Users can configure the hardware error threshold by 'isolate_strategy' sysfs node. The user space can get the device isolated state by 'isolate' sysfs node. If the number of device errors exceeds the configured error threshold, the device will be isolated. It means the uacce device is unavailable. Signed-off-by: Kai Ye <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-20power: remove z2_battery driverArnd Bergmann1-17/+0
The PXA z2 platform is gone, and this driver is now orphaned. Cc: [email protected] Cc: Peter Edwards <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Acked-by: Robert Jarzmik <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-20ARM: pxa: remove unused pxa3xx-ulpiArnd Bergmann1-32/+0
This was only used by the cm-x300 board, which is now gone. Cc: Alan Stern <[email protected]> Cc: [email protected] Acked-by: Robert Jarzmik <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-20ARM: pxa: remove irda leftoverArnd Bergmann1-26/+0
irda support was removed a long time ago, so stop registering the devices from the pxa machine. Acked-by: Robert Jarzmik <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-20firmware: zynqmp: fix declarations for gcc-13Arnd Bergmann1-4/+4
gcc-13.0.1 reports a type mismatch for two functions: drivers/firmware/xilinx/zynqmp.c:1228:5: error: conflicting types for 'zynqmp_pm_set_rpu_mode' due to enum/integer mismatch; have 'int(u32, enum rpu_oper_mode)' {aka 'int(unsigned int, enum rpu_oper_mode)'} [-Werror=enum-int-mismatch] 1228 | int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode) | ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/firmware/xilinx/zynqmp.c:25: include/linux/firmware/xlnx-zynqmp.h:552:5: note: previous declaration of 'zynqmp_pm_set_rpu_mode' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'} 552 | int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1); | ^~~~~~~~~~~~~~~~~~~~~~ drivers/firmware/xilinx/zynqmp.c:1246:5: error: conflicting types for 'zynqmp_pm_set_tcm_config' due to enum/integer mismatch; have 'int(u32, enum rpu_tcm_comb)' {aka 'int(unsigned int, enum rpu_tcm_comb)'} [-Werror=enum-int-mismatch] 1246 | int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode) | ^~~~~~~~~~~~~~~~~~~~~~~~ include/linux/firmware/xlnx-zynqmp.h:553:5: note: previous declaration of 'zynqmp_pm_set_tcm_config' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'} 553 | int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1); | ^~~~~~~~~~~~~~~~~~~~~~~~ Change the declaration in the header to match the function definition. Acked-by: Michal Simek <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-20pinctrl: Add an API to get the pinctrl pins if initializedHanna Hawa1-0/+15
Add an API to get the pinctrl pins if it was initialized before driver probed. This API will be used in I2C core to get the device pinctrl information for recovery state change. Signed-off-by: Hanna Hawa <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2023-01-19Merge tag 'mlx5-updates-2023-01-18' of ↵Jakub Kicinski1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-01-18 1) From Rahul, 1.1) extended range for PTP adjtime and adjphase 1.2) adjphase function to support hardware-only offset control 2) From Roi, code cleanup to the TC module. 3) From Maor, TC support for Geneve and GRE with VF tunnel offload 4) Cleanups and minor updates. * tag 'mlx5-updates-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Use read lock for eswitch get callbacks net/mlx5e: Remove redundant allocation of spec in create indirect fwd group net/mlx5e: Support Geneve and GRE with VF tunnel offload net/mlx5: E-Switch, Fix typo for egress net/mlx5e: Warn when destroying mod hdr hash table that is not empty net/mlx5e: TC, Use common function allocating flow mod hdr or encap mod hdr net/mlx5e: TC, Add tc prefix to attach/detach hdr functions net/mlx5e: TC, Pass flow attr to attach/detach mod hdr functions net/mlx5e: Add warning when log WQE size is smaller than log stride size net/mlx5e: Fail with messages when params are not valid for XSK net/mlx5: E-switch, Remove redundant comment about meta rules net/mlx5: Add hardware extended range support for PTP adjtime and adjphase net/mlx5: Add adjphase function to support hardware-only offset control net/mlx5: Suppress error logging on UCTX creation net/mlx5e: Suppress Send WQEBB room warning for PAGE_SIZE >= 16KB ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-19net/mlx5: Remove MLX5E_LOCKED_FLOW flagJiri Pirko1-4/+0
The MLX5E_LOCKED_FLOW flag is not checked anywhere now so remove it entirely. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-19livepatch: Improve the search performance of module_kallsyms_on_each_symbol()Zhen Lei1-2/+4
Currently we traverse all symbols of all modules to find the specified function for the specified module. But in reality, we just need to find the given module and then traverse all the symbols in it. Let's add a new parameter 'const char *modname' to function module_kallsyms_on_each_symbol(), then we can compare the module names directly in this function and call hook 'fn' after matching. If 'modname' is NULL, the symbols of all modules are still traversed for compatibility with other usage cases. Phase1: mod1-->mod2..(subsequent modules do not need to be compared) | Phase2: -->f1-->f2-->f3 Assuming that there are m modules, each module has n symbols on average, then the time complexity is reduced from O(m * n) to O(m) + O(n). Reviewed-by: Petr Mladek <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Zhen Lei <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Miroslav Benes <[email protected]> Reviewed-by: Luis Chamberlain <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-01-19x86/nmi: Print reasons why backtrace NMIs are ignoredPaul E. McKenney1-0/+8
Instrument nmi_trigger_cpumask_backtrace() to dump out diagnostics based on evidence accumulated by exc_nmi(). These diagnostics are dumped for CPUs that ignored an NMI backtrace request for more than 10 seconds. [ paulmck: Apply Ingo Molnar feedback. ] Signed-off-by: Paul E. McKenney <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: <[email protected]> Reviewed-by: Ingo Molnar <[email protected]>
2023-01-19KVM: MMU: Make the definition of 'INVALID_GPA' commonYu Zhang1-1/+1
KVM already has a 'GPA_INVALID' defined as (~(gpa_t)0) in kvm_types.h, and it is used by ARM code. We do not need another definition of 'INVALID_GPA' for X86 specifically. Instead of using the common 'GPA_INVALID' for X86, replace it with 'INVALID_GPA', and change the users of 'GPA_INVALID' so that the diff can be smaller. Also because the name 'INVALID_GPA' tells the user we are using an invalid GPA, while the name 'GPA_INVALID' is emphasizing the GPA is an invalid one. No functional change intended. Signed-off-by: Yu Zhang <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Oliver Upton <[email protected]>
2023-01-19soc: mediatek: pm-domains: Add support for mt8188Garmin.Chang1-0/+121
Add domain control data including bus protection data size change due to more protection steps in mt8188. Signed-off-by: Garmin.Chang <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-01-19VT: Add height parameter to con_font_get/set consw operationsSamuel Thibault1-2/+3
The current con_font_get/set API currently hardcodes a 32-pixel-tall limitation, which only dates from the old VGA hardware which could not handle taller fonts than that. This change just adds a vpitch parameter to release this constraint. Drivers which do not support vpitch != 32 can just return EINVAL when it is not 32, font loading tools will revert to trying 32 and succeed. This change makes the fbcon driver consider vpitch appropriately, thus making it able to load large fonts. Signed-off-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19net: phy: Remove probe_capabilitiesAndrew Lunn1-8/+0
Deciding if to probe of PHYs using C45 is now determine by if the bus provides the C45 read method. This makes probe_capabilities redundant so remove it. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Acked-by: Andrew Jeffery <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-19net: mdio: Add workaround for Micrel PHYs which are not C45 compatibleAndrew Lunn1-0/+2
After scanning the bus for C22 devices, check if any Micrel PHYs have been found. They are known to do bad things if there are C45 transactions on the bus. Prevent the scanning of the bus using C45 if such a PHY has been detected. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-19net: mdio: Rework scanning of bus ready for quirksAndrew Lunn1-1/+1
Some C22 PHYs do bad things when there are C45 transactions on the bus. In order to handle this, the bus needs to be scanned first for C22 at all addresses, and then C45 scanned for all addresses. The Marvell pxa168 driver scans a specific address on the bus to find its PHY. This is a C22 only device, so update it to use the c22 helper. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-19fpga: dfl: add basic support for DFHv1Matthew Gerlach1-0/+8
Version 1 of the Device Feature Header (DFH) definition adds functionality to the Device Feature List (DFL) bus. A DFHv1 header may have one or more parameter blocks that further describes the HW to SW. Add support to the DFL bus to parse the MSI-X parameter. The location of a feature's register set is explicitly described in DFHv1 and can be relative to the base of the DFHv1 or an absolute address. Parse the location and pass the information to DFL driver. Signed-off-by: Matthew Gerlach <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19tty: Call ->dtr_rts() parameter active consistentlyIlpo Järvinen1-2/+2
Convert various parameter names for ->dtr_rts() and related functions from onoff, on, and raise to active. Reviewed-by: Jiri Slaby <[email protected]> Acked-by: Ulf Hansson <[email protected]> # For MMC Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19tty: Return bool from tty_termios_hw_change()Ilpo Järvinen1-1/+1
Change tty_termios_hw_change() to return bool. Reviewed-by: Jiri Slaby <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19serial: Make uart_handle_cts_change() status param bool activeIlpo Järvinen1-2/+1
Convert uart_handle_cts_change() to bool which is more appropriate than unsigned int. Rename status to active to better describe what the parameter means. While at it, make the comment about the active parameter easier to parse. Cleanup callsites from operations that are not necessary with bool. Reviewed-by: Jiri Slaby <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool activeIlpo Järvinen2-4/+3
Convert status parameter for ->dcd_change() and uart_handle_dcd_change() to bool which matches to how the parameter is used. Rename status to active to better describe what the parameter means. Acked-by: Rodolfo Giometti <[email protected]> Reviewed-by: Jiri Slaby <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19tty: Convert ->dtr_rts() to take bool argumentIlpo Järvinen1-2/+2
Convert the raise/on parameter in ->dtr_rts() to bool through the callchain. The parameter is used like bool. In USB serial, there remains a few implicit bool -> larger type conversions because some devices use u8 in their control messages. In moxa_tiocmget(), dtr variable was reused for line status which requires int so use a separate variable for status. Reviewed-by: Jiri Slaby <[email protected]> Acked-by: Ulf Hansson <[email protected]> # For MMC Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19tty: Convert ->carrier_raised() and callchains to boolIlpo Järvinen1-3/+3
Return boolean from ->carrier_raised() instead of 0 and 1. Make the return type change also to tty_port_carrier_raised() that makes the ->carrier_raised() call (+ cd variable in moxa into which its return value is stored). Also cleans up a few unnecessary constructs related to this change: return xx ? 1 : 0; -> return xx; if (xx) return 1; return 0; -> return xx; Reviewed-by: Jiri Slaby <[email protected]> Acked-by: Ulf Hansson <[email protected]> # For MMC Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19serial: core: Add option to output RS485 RX_DURING_TX state via GPIOChristoph Niedermaier1-0/+1
This patch provides a generic GPIO variable for outputting the state of RS485 RX_DURING_TX. The GPIO is defined by the devicetree property "rs485-rx-during-tx-gpios". To use it in a low level serial driver, the evaluation of this variable must be implemented there accordingly. Signed-off-by: Christoph Niedermaier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19soc: qcom-geni-se: add more symbol definitionsBartosz Golaszewski1-0/+3
The following symbols will be used when adding support for SE DMA in the qcom geni serial driver. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19tty: vt: remove struct uni_screenJiri Slaby (SUSE)1-2/+1
It contains only lines with pointers to characters (u32s). So use simple clear 'u32 **lines' all over the code. This avoids zero-length arrays. It also makes the allocation less error-prone (size of the struct wasn't taken into account at all). Signed-off-by: Jiri Slaby (SUSE) <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19serial: 8250: Name MSR literalsIlpo Järvinen1-0/+5
Add UART_MSR_STATUS_BITS for CD, RI, DSR & CTS. Use names for the literal. Don't make the define for combined flags part of UAPI. Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19serial: 8250: Use defined IER bitsIlpo Järvinen1-0/+5
Instead of literal 0x0f, add a define for enabling all IER bits the 8250 driver is interested in. Don't make the define for combined flags part of UAPI. Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19earlycon: Increase options sizeRicardo Ribalda1-1/+1
Now that the clock frequency is also part of the options, 16 bytes is too little. Without this patch dmesg does not show the whole options, Eg: earlycon: uart0 at MMIO32 0x00000000fedc9000 (options '115200n8,480000') instead of: '115200n8,48000000' Signed-off-by: Ricardo Ribalda <[email protected]> Reviewed-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19bitfield: add FIELD_PREP_CONST()Johannes Berg1-0/+26
Neither FIELD_PREP() nor *_encode_bits() can be used in constant contexts (such as initializers), but we don't want to define shift constants for all masks just for use in initializers, and having checks that the values fit is also useful. Therefore, add FIELD_PREP_CONST() which is a smaller version of FIELD_PREP() that can only take constant arguments and has less friendly (but not less strict) error checks, and expands to a constant value. Signed-off-by: Johannes Berg <[email protected]> Link: https://lore.kernel.org/r/20230118142652.53f20593504b.Iaeea0aee77a6493d70e573b4aa55c91c00e01e4b@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-01-19device property: Make fwnode_graph_for_each_endpoint() consistentAndy Shevchenko1-3/+3
Make fwnode_graph_for_each_endpoint() consistent with the rest of for_each_*() definitions in the file, i.e. use the form of for (iter = func(NULL); iter; \ iter = func(iter)) as it's done in all the rest of the similar macro definitions. Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Acked-by: Sakari Ailus <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19usb: gadget: add WebUSB landing page supportJó Ágila Bitsch2-0/+90
There is a custom (non-USB IF) extension to the USB standard: https://wicg.github.io/webusb/ This specification is published under the W3C Community Contributor Agreement, which in particular allows to implement the specification without any royalties. The specification allows USB gadgets to announce an URL to landing page and describes a Javascript interface for websites to interact with the USB gadget, if the user allows it. It is currently supported by Chromium-based browsers, such as Chrome, Edge and Opera on all major operating systems including Linux. This patch adds optional support for Linux-based USB gadgets wishing to expose such a landing page. During device enumeration, a host recognizes that the announced USB version is at least 2.01, which means, that there are BOS descriptors available. The device than announces WebUSB support using a platform device capability. This includes a vendor code under which the landing page URL can be retrieved using a vendor-specific request. Previously, the BOS descriptors would unconditionally include an LPM related descriptor, as BOS descriptors were only ever sent when the device was LPM capable. As this is no longer the case, this patch puts this descriptor behind a lpm_capable condition. Usage is modeled after os_desc descriptors: echo 1 > webusb/use echo "https://www.kernel.org" > webusb/landingPage lsusb will report the device with the following lines: Platform Device Capability: bLength 24 bDescriptorType 16 bDevCapabilityType 5 bReserved 0 PlatformCapabilityUUID {3408b638-09a9-47a0-8bfd-a0768815b665} WebUSB: bcdVersion 1.00 bVendorCode 0 iLandingPage 1 https://www.kernel.org Signed-off-by: Jó Ágila Bitsch <[email protected]> Link: https://lore.kernel.org/r/Y8Crf8P2qAWuuk/F@jo-einhundert Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-19coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace IDMike Leach1-0/+14
Use the perf_report_aux_output_id() call to output the CoreSight trace ID and associated CPU as a PERF_RECORD_AUX_OUTPUT_HW_ID record in the perf.data file. Signed-off-by: Mike Leach <[email protected]> Reviewed-by: Suzuki K Poulose <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-19coresight: trace id: Remove legacy get trace ID function.Mike Leach1-12/+0
Removes legacy coresight_get_trace_id() function now its use has been removed from the ETM code. Signed-off-by: Mike Leach <[email protected]> Reviewed-by: Suzuki K Poulose <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-19coresight: etmX.X: stm: Remove trace_id() callbackMike Leach1-3/+0
CoreSight sources provide a callback (.trace_id) in the standard source ops which returns the ID to the core code. This was used to check that sources all had a unique Trace ID. Uniqueness is now gauranteed by the Trace ID allocation system, and the check code has been removed from the core. This patch removes the unneeded and unused .trace_id source ops from the ops structure and implementations in etm3x, etm4x and stm. Signed-off-by: Mike Leach <[email protected]> Reviewed-by: Suzuki K Poulose <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-19coresight: trace-id: Add API to dynamically assign Trace ID valuesMike Leach1-0/+10
The existing mechanism to assign Trace ID values to sources is limited and does not scale for larger multicore / multi trace source systems. The API introduces functions that reserve IDs based on availabilty represented by a coresight_trace_id_map structure. This records the used and free IDs in a bitmap. CPU bound sources such as ETMs use the coresight_trace_id_get_cpu_id coresight_trace_id_put_cpu_id pair of functions. The API will record the ID associated with the CPU. This ensures that the same ID will be re-used while perf events are active on the CPU. The put_cpu_id function will pend release of the ID until all perf cs_etm sessions are complete. For backward compatibility the functions will attempt to use the same CPU IDs as the legacy system would have used if these are still available. Non-cpu sources, such as the STM can use coresight_trace_id_get_system_id / coresight_trace_id_put_system_id. Signed-off-by: Mike Leach <[email protected]> [ Fix checkpatch warning in drivers/hwtracing/coresight/coresight-trace-id.c ] Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-19Merge drm/drm-next into drm-misc-nextThomas Zimmermann294-2962/+6112
Backmerging into drm-misc-next to get DRM accelerator infrastructure, which is required by ipuv driver. Signed-off-by: Thomas Zimmermann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.