| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.3
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
* tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
dt-bindings: soc: qcom: Introduce PMIC GLINK binding
soc: qcom: dcc: Drop driver for now
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The only caller to get_kernel_pages() [shm_get_kernel_pages()] has been
updated to not need it.
Remove get_kernel_pages().
Cc: Mel Gorman <[email protected]>
Cc: Al Viro <[email protected]>
Cc: "Fabio M. De Francesco" <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Andrew Morton <[email protected]>
Acked-by: John Hubbard <[email protected]>
Signed-off-by: Ira Weiny <[email protected]>
Acked-by: Andrew Morton <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Jens Wiklander <[email protected]>
|
|
is_kmap_addr() is only looking at the kmap() address range which may
cause check_heap_object() to miss checking an overflow on a
kmap_local_page() page.
Add a check for the kmap_local_page() address range to is_kmap_addr().
Cc: Matthew Wilcox <[email protected]>
Cc: Al Viro <[email protected]>
Cc: "Fabio M. De Francesco" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Ira Weiny <[email protected]>
Acked-by: Andrew Morton <[email protected]>
Signed-off-by: Jens Wiklander <[email protected]>
|
|
pci_msix_alloc_irq_at() and pci_msix_free_irq() are not declared when
CONFIG_PCI_MSI is disabled.
Users of these two calls do not yet exist but when users do appear (shown
below is an attempt to use the new API in vfio-pci) the following errors
will be encountered when compiling with CONFIG_PCI_MSI disabled:
drivers/vfio/pci/vfio_pci_intrs.c:461:4: error: implicit declaration of\
function 'pci_msix_free_irq' is invalid in C99\
[-Werror,-Wimplicit-function-declaration]
pci_msix_free_irq(pdev, msix_map);
^
drivers/vfio/pci/vfio_pci_intrs.c:511:15: error: implicit declaration of\
function 'pci_msix_alloc_irq_at' is invalid in C99\
[-Werror,-Wimplicit-function-declaration]
msix_map = pci_msix_alloc_irq_at(pdev, vector, NULL);
Provide definitions for pci_msix_alloc_irq_at() and pci_msix_free_irq() in
preparation for users that need to compile when CONFIG_PCI_MSI is
disabled.
Reported-by: kernel test robot <[email protected]>
Fixes: 34026364df8e ("PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X")
Signed-off-by: Reinette Chatre <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/158e40e1cfcfc58ae30ecb2bbfaf86e5bba7a1ef.1675978686.git.reinette.chatre@intel.com
|
|
Add replacement for phy_ethtool_get/set_eee() functions.
Current phy_ethtool_get/set_eee() implementation is great and it is
possible to make it even better:
- this functionality is for devices implementing parts of IEEE 802.3
specification beyond Clause 22. The better place for this code is
phy-c45.c
- currently it is able to do read/write operations on PHYs with
different abilities to not existing registers. It is better to
use stored supported_eee abilities to avoid false read/write
operations.
- the eee_active detection will provide wrong results on not supported
link modes. It is better to validate speed/duplex properties against
supported EEE link modes.
- it is able to support only limited amount of link modes. We have more
EEE link modes...
By refactoring this code I address most of this point except of the last
one. Adding additional EEE link modes will need more work.
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This function will be needed for genphy_c45_ethtool_get_eee() provided
by next patch.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add generic function for EEE abilities defined by IEEE 802.3
specification. For now following registers are supported:
- IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20)
- IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
(Register 1.2295)
Since I was not able to find any flag signaling support of these
registers, we should detect link mode abilities first and then based on
these abilities doing EEE link modes detection.
Results of EEE ability detection will be stored into new variable
phydev->supported_eee.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add field with PCIe remapped based address for passing it across
relevant platform drivers sharing common system resources.
Signed-off-by: Vadim Pasternak <[email protected]>
Reviewed-by: Michael Shych <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Similar to what was done for TX_PUSH, add an RX_PUSH concept
to the ethtool interfaces.
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch removes the temporary scaffolding now that the comletion
function signature has been converted.
Signed-off-by: Herbert Xu <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
This patch does the final flag day conversion of all completion
functions which are now all contained in the Crypto API.
Signed-off-by: Herbert Xu <[email protected]>
|
|
The crypto completion function currently takes a pointer to a
struct crypto_async_request object. However, in reality the API
does not allow the use of any part of the object apart from the
data field. For example, ahash/shash will create a fake object
on the stack to pass along a different data field.
This leads to potential bugs where the user may try to dereference
or otherwise use the crypto_async_request object.
This patch adds some temporary scaffolding so that the completion
function can take a void * instead. Once affected users have been
converted this can be removed.
The helper crypto_request_complete will remain even after the
conversion is complete. It should be used instead of calling
the completion function directly.
Signed-off-by: Herbert Xu <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Some TPM 2.0 devices have support for additional commands which are not
part of the TPM 2.0 specifications.
These commands are identified with bit 29 of the 32 bits command codes.
Contrarily to other fields of the TPMA_CC spec structure used to list
available commands, the Vendor flag also has to be present in the
command code itself (TPM_CC) when called.
Add this flag to tpm_find_cc() mask to prevent blocking vendor command
codes that can actually be supported by the underlying TPM device.
Signed-off-by: Julien Gomes <[email protected]>
Tested-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
key_create() works like key_create_or_update() but does not allow
updating an existing key, instead returning ERR_PTR(-EEXIST).
key_create() will be used by the blacklist keyring which should not
create duplicate entries or update existing entries.
Instead a dedicated message with appropriate severity will be logged.
Signed-off-by: Thomas Weißschuh <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix showing of TASK_COMM_LEN instead of its value
The TASK_COMM_LEN was converted from a macro into an enum so that BTF
would have access to it. But this unfortunately caused TASK_COMM_LEN
to display in the format fields of trace events, as they are created
by the TRACE_EVENT() macro and such, macros convert to their values,
where as enums do not.
To handle this, instead of using the field itself to be display, save
the value of the array size as another field in the trace_event_fields
structure, and use that instead.
Not only does this fix the issue, but also converts the other trace
events that have this same problem (but were not breaking tooling).
With this change, the original work around b3bc8547d3be6 ("tracing:
Have TRACE_DEFINE_ENUM affect trace event types as well") could be
reverted (but that should be done in the merge window)"
* tag 'trace-v6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix TASK_COMM_LEN in trace event format file
|
|
After commit 3087c61ed2c4 ("tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN"),
the content of the format file under
/sys/kernel/tracing/events/task/task_newtask was changed from
field:char comm[16]; offset:12; size:16; signed:0;
to
field:char comm[TASK_COMM_LEN]; offset:12; size:16; signed:0;
John reported that this change breaks older versions of perfetto.
Then Mathieu pointed out that this behavioral change was caused by the
use of __stringify(_len), which happens to work on macros, but not on enum
labels. And he also gave the suggestion on how to fix it:
:One possible solution to make this more robust would be to extend
:struct trace_event_fields with one more field that indicates the length
:of an array as an actual integer, without storing it in its stringified
:form in the type, and do the formatting in f_show where it belongs.
The result as follows after this change,
$ cat /sys/kernel/tracing/events/task/task_newtask/format
field:char comm[16]; offset:12; size:16; signed:0;
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Alexei Starovoitov <[email protected]>
Cc: Kajetan Puchalski <[email protected]>
CC: Qais Yousef <[email protected]>
Fixes: 3087c61ed2c4 ("tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN")
Reported-by: John Stultz <[email protected]>
Debugged-by: Mathieu Desnoyers <[email protected]>
Suggested-by: Mathieu Desnoyers <[email protected]>
Suggested-by: Steven Rostedt <[email protected]>
Signed-off-by: Yafang Shao <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Add a 'signal' field which allows unwind hints to specify whether the
instruction pointer should be taken literally (like for most interrupts
and exceptions) rather than decremented (like for call stack return
addresses) when used to find the next ORC entry.
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/d2c5ec4d83a45b513d8fd72fab59f1a8cfa46871.1676068346.git.jpoimboe@kernel.org
|
|
We can simply set root memcg as the map's memcg to disable bpf memory
accounting. bpf_map_area_alloc is a little special as it gets the memcg
from current rather than from the map, so we need to disable GFP_ACCOUNT
specifically for it.
Signed-off-by: Yafang Shao <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Introduce new helper bpf_map_kvcalloc() for the memory allocation in
bpf_local_storage(). Then the allocation will charge the memory from the
map instead of from current, though currently they are the same thing as
it is only used in map creation path now. By charging map's memory into
the memcg from the map, it will be more clear.
Signed-off-by: Yafang Shao <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add new kernel parameter cgroup.memory=nobpf to allow user disable bpf
memory accounting. This is a preparation for the followup patch.
Signed-off-by: Yafang Shao <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Include the support for enumerating and provisioning ram regions for
v6.3. This also include a default policy change for ram / volatile
device-dax instances to assign them to the dax_kmem driver by default.
|
|
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d01 ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/[email protected]/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In preparation for the CXL region driver to take over the responsibility
of registering device-dax instances for CXL regions, move the
registration of "hmem" devices to dax_hmem.ko.
Previously the builtin component of this enabling
(drivers/dax/hmem/device.o) would register platform devices for each
address range and trigger the dax_hmem.ko module to load and attach
device-dax instances to those devices. Now, the ranges are collected
from the HMAT and EFI memory map walking, but the device creation is
deferred. A new "hmem_platform" device is created which triggers
dax_hmem.ko to load and register the platform devices.
Tested-by: Fan Ni <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/167602002771.1924368.5653558226424530127.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
In preparation for hmem platform devices to be unregistered, stop using
platform_device_add_resources() to convey the address range. The
platform_device_add_resources() API causes an existing "Soft Reserved"
iomem resource to be re-parented under an inserted platform device
resource. When that platform device is deleted it removes the platform
device resource and all children.
Instead, it is sufficient to convey just the address range and let
request_mem_region() insert resources to indicate the devices active in
the range. This allows the "Soft Reserved" resource to be re-enumerated
upon the next probe event.
Reviewed-by: Jonathan Cameron <[email protected]>
Tested-by: Fan Ni <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/167602002217.1924368.7036275892522551624.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
In support of the CXL subsystem's use of 'struct range' to track decode
address ranges, add a common range_contains() implementation with
identical semantics as resource_contains();
The existing 'range_contains()' in lib/stackinit_kunit.c is namespaced
with a 'stackinit_' prefix.
Cc: Kees Cook <[email protected]>
Reviewed-by: Vishal Verma <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Gregory Price <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Tested-by: Fan Ni <[email protected]>
Link: https://lore.kernel.org/r/167601998163.1924368.6067392174077323935.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <[email protected]>
|
|
To pick up depended-upon changes
|
|
Using an abstract number as the DW eDMA chip identifier isn't practical
because there can be more than one DW eDMA controller on the platform. Some
may be detected as the PCIe Endpoints, and others may be embedded in DW
PCIe Root Port/Endpoint controllers. An abstract number in, for instance,
the IRQ handlers list, doesn't give a notion regarding their reference to
the particular DMA controller.
To preserve the code simplicity and support multi-eDMA platforms, use the
parental device name to create the DW eDMA controller name.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Serge Semin <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Acked-by: Vinod Koul <[email protected]>
|
|
For SPI controller that implements transfer_one_message, it needs to
insert the delay that required by cs change event between the transfers.
Add a wrapper for the local function _spi_transfer_cs_change_delay_exec
and export it for SPI controller driver to use.
Signed-off-by: William Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
First of all, we don't use intel-family.h directly. On the other hand
we actively use boolean type, that is defined in the types.h (we take
top-level header for that) and x86_cpu_id, that is provided in the
mod_devicetable.h.
Secondly, we don't need to spread SOC_INTEL_IS_CPU() macro to the users.
Hence, undefine it when it's appropriate.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
When a fbdev with deferred I/O is once opened and closed, the dirty
pages still remain queued in the pageref list, and eventually later
those may be processed in the delayed work. This may lead to a
corruption of pages, hitting an Oops.
This patch makes sure to cancel the delayed work and clean up the
pageref list at closing the device for addressing the bug. A part of
the cleanup code is factored out as a new helper function that is
called from the common fb_release().
Reviewed-by: Patrik Jakobsson <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Tested-by: Miko Larsson <[email protected]>
Fixes: 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref struct")
Reviewed-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Instead of poking around in the struct bus_type directly for the
dev_root pointer, provide a function to return it properly reference
counted, if it is present in the bus. This will be needed to move the
pointer out of struct bus_type in the future.
Use the function in the driver core code at the same time it is
introduced to verify that it works properly.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
skbuff_head_cache is misnamed (perhaps for historical reasons?)
because it does not hold heads. Head is the buffer which skb->data
points to, and also where shinfo lives. struct sk_buff is a metadata
structure, not the head.
Eric recently added skb_small_head_cache (which allocates actual
head buffers), let that serve as an excuse to finally clean this up :)
Leave the user-space visible name intact, it could possibly be uAPI.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Move string_is_valid() to the header for wider use.
While at it, rename to string_is_terminated() to be
precise about its semantics.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Make an order in struct dma_device:
- added missing kernel doc descriptions
- put descriptions in the order of appearance in the code
- updated indentation where it makes sense
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The Xilinx DMA/Bridge Subsystem for PCIe (XDMA) provides up to 16 user
interrupt wires to user logic that generate interrupts to the host.
This patch adds APIs to enable/disable user logic interrupt for a given
interrupt wire index.
Signed-off-by: Lizhi Hou <[email protected]>
Signed-off-by: Sonal Santan <[email protected]>
Signed-off-by: Max Zhen <[email protected]>
Signed-off-by: Brian Xu <[email protected]>
Tested-by: Martin Tuma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Add driver to enable PCIe board which uses XDMA (the DMA/Bridge Subsystem
for PCI Express). For example, Xilinx Alveo PCIe devices.
https://www.xilinx.com/products/boards-and-kits/alveo.html
The XDMA engine support up to 4 Host to Card (H2C) and 4 Card to Host (C2H)
channels. Memory transfers are specified on a per-channel basis in
descriptor linked lists, which the DMA fetches from host memory and
processes. Events such as descriptor completion and errors are signaled
using interrupts. The hardware detail is provided by
https://docs.xilinx.com/r/en-US/pg195-pcie-dma/Introduction
This driver implements dmaengine APIs.
- probe the available DMA channels
- use dma_slave_map for channel lookup
- use virtual channel to manage dmaengine tx descriptors
- implement device_prep_slave_sg callback to handle host scatter gather
list
- implement device_config to config device address for DMA transfer
Signed-off-by: Lizhi Hou <[email protected]>
Signed-off-by: Sonal Santan <[email protected]>
Signed-off-by: Max Zhen <[email protected]>
Signed-off-by: Brian Xu <[email protected]>
Tested-by: Martin Tuma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
If RPS is enabled, this allows configuring a default rps
mask, which is effective since receive queue creation time.
A default RPS mask allows the system admin to ensure proper
isolation, avoiding races at network namespace or device
creation time.
The default RPS mask is initially empty, and can be
modified via a newly added sysctl entry.
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Move the flags that should not/are not used outside gup.c and related into
mm/internal.h to discourage driver abuse.
To make this more maintainable going forward compact the two FOLL ranges
with new bit numbers from 0 to 11 and 16 to 21, using shifts so it is
explicit.
Switch to an enum so the whole thing is easier to read.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This function is only used in gup.c and closely related. It touches
FOLL_PIN so it must be moved before the next patch.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: David Howells <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit ed29c2691188 ("drm/i915: Fix userptr so we do not have to worry
about obj->mm.lock, v7.") removed the only caller, remove this dead code
too.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: David Howells <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Setting FOLL_UNLOCKABLE allows GUP to lock/unlock the mmap lock on its
own. It is a more explicit replacement for locked != NULL. This clears
the way for passing in locked = 1, without intending that the lock can be
unlocked.
Set the flag in all cases where it is used, eg locked is present in the
external interface or locked is used internally with locked = 0.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This is part of the internal function of gup.c and is only non-static so
that the parts of gup.c in the huge_memory.c and hugetlb.c can call it.
Put it in internal.h beside the similarly purposed try_grab_folio()
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
These days FOLL_LONGTERM is not allowed at all on any get_user_pages*()
functions, it must be only be used with pin_user_pages*(), plus it now has
universal support for all the pin_user_pages*() functions.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Through vmalloc API, a virtual kernel area is reserved for physical
address mapping. And vmap_area is used to track them, while vm_struct is
allocated to associate with the vmap_area to store more information and
passed out.
However, area reserved via vm_map_ram() is an exception. It doesn't have
vm_struct to associate with vmap_area. And we can't recognize the
vmap_area with '->vm == NULL' as a vm_map_ram() area because the normal
freeing path will set va->vm = NULL before unmapping, please see function
remove_vm_area().
Meanwhile, there are two kinds of handling for vm_map_ram area. One is
the whole vmap_area being reserved and mapped at one time through
vm_map_area() interface; the other is the whole vmap_area with
VMAP_BLOCK_SIZE size being reserved, while mapped into split regions with
smaller size via vb_alloc().
To mark the area reserved through vm_map_ram(), add flags field into
struct vmap_area. Bit 0 indicates this is vm_map_ram area created through
vm_map_ram() interface, while bit 1 marks out the type of vm_map_ram area
which makes use of vmap_block to manage split regions via vb_alloc/free().
This is a preparation for later use.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Baoquan He <[email protected]>
Reviewed-by: Lorenzo Stoakes <[email protected]>
Reviewed-by: Uladzislau Rezki (Sony) <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Stephen Brennan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
These are the folio replacements for shmem_read_mapping_page() and
shmem_read_mapping_page_gfp().
[[email protected]: fix shmem_read_mapping_page_gfp(), per Matthew]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mark Hemment <[email protected]>
Cc: Charan Teja Kalla <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavankumar Kondeti <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This is like read_cache_page_gfp() except it returns the folio instead
of the precise page.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Cc: Charan Teja Kalla <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Mark Hemment <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavankumar Kondeti <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Provide vm_flags_reset_once() and replace the vm_flags updates which used
WRITE_ONCE() to prevent compiler optimizations.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 0cce31a0aa0e ("mm: replace vma->vm_flags direct modifications with modifier calls")
Signed-off-by: Suren Baghdasaryan <[email protected]>
Reported-by: Hyeonggon Yoo <[email protected]>
Reviewed-by: Hyeonggon Yoo <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There are scenarios when vm_flags can be modified without exclusive
mmap_lock, such as:
- after VMA was isolated and mmap_lock was downgraded or dropped
- in exit_mmap when there are no other mm users and locking is unnecessary
Introduce __vm_flags_mod to avoid assertions when the caller takes
responsibility for the required locking.
Pass a hint to untrack_pfn to conditionally use __vm_flags_mod for
flags modification to avoid assertion.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjun Roy <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Greg Thelen <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Laurent Dufour <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Oskolkov <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Punit Agrawal <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[[email protected]: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Acked-by: Sebastian Reichel <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Reviewed-by: Hyeonggon Yoo <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjun Roy <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Greg Thelen <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Laurent Dufour <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Oskolkov <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Punit Agrawal <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|