| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The interface is not needed for IPC3 but will be needed for
ACE2.x+IPC4 combinations, with the substream information passed as a
parameter.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
An earlier simplification to only pass the direction is no longer
suitable, all the ACE2.x HDaudio DMA management relies on access to
the substream structure.
This patch is an iso-functionality change, the HDaudio DMA parts will
be provided separately.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Add the abstraction needed to only program the LSDIID registers for
the HDaudio extended links. It's perfectly fine to program this
register multiple times in case devices lose sync and reattach.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
When a peripheral reports as ATTACHED, the manager may need to follow
a programming sequence, e.g. to assign DMA resources and/or assign a
command queue for that peripheral.
This patch adds an optional callback, which will be invoked every time
the peripheral attaches. This might be overkill in some scenarios, and
one could argue that this should be invoked only on the first
attachment. The bus does not however track this first attachment with
any existing state-mirroring variable, and using dev_num_sticky would
not work across suspend-resume cycles.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
In existing Intel/SoundWire systems, all the SoundWire configuration
is 'self-contained', with the 'shim_lock' mutex used to protect access
to shared registers in multi-link configurations.
With the move of part of the SoundWire registers to the HDaudio
multi-link structure, we need a unified lock. The hda-mlink
implementation provides an 'eml_lock' that is used to protect shared
registers such as LCTL and LSYNC, we can pass it to the SoundWire
side. There is no issue with possible dangling pointers since the
SoundWire auxiliary devices are children of the PCI device, so the
'eml_lock' cannot be removed while the SoundWire side is in use.
This patch only adds the interface for now.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The hdac_bus pointer is used to access the extended link information
and handle power management. Pass it from the SOF driver down to the
auxiliary devices.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The previous settings are not applicable, use a flag to determine what
the register layout is.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The register map and programming sequences for the ACE2.x IP are
completely different and need to be abstracted with a different set of
callbacks.
This initial patch adds a new file, follow-up patches will add each
required callback.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
With the HDaudio extended link integration, the SHIM and IP registers
are split in blocks
a) SHIM generic registers
b) IP registers (same offsets for Cadence IP as before)
c) SHIM vendor-specific registers
Add offsets and definitions as defined in the hardware specifications.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
We need the serial/tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The LLCC EDAC register offsets varies between each SoC. Hardcoding the
register offsets won't work and will often result in crash due to
accessing the wrong locations.
Hence, get the register offsets from the LLCC driver matching the
individual SoCs.
Cc: <[email protected]> # 6.0: 5365cea199c7 ("soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version")
Cc: <[email protected]> # 6.0: c13d7d261e36 ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver")
Cc: <[email protected]> # 6.0
Fixes: a6e9d7ef252c ("soc: qcom: llcc: Add configuration data for SM8450 SoC")
Acked-by: Borislav Petkov (AMD) <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Introduce a helper to return the SoC SMEM ID, which is used to identify the
exact SoC model as there may be differences in the same SoC family.
Currently, cpufreq-nvmem does this completely in the driver and there has
been more interest expresed for other drivers to use this information so
lets expose a common helper to prevent redoing it in individual drivers
since this field is present on every SMEM table version.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Move SMEM item struct and related defines to a header in order to be able
to reuse them in the SMEM driver instead of duplicating them.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-26
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).
The main changes are:
1) Add the capability to destroy sockets in BPF through a new kfunc,
from Aditi Ghag.
2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
from Andrii Nakryiko.
3) Add capability for libbpf to resize datasec maps when backed via mmap,
from JP Kobryn.
4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
from Jiri Olsa.
5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
from Magnus Karlsson.
6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
via bpftool, from Yafang Shao.
7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
from Yonghong Song.
8) Extend bpftool to specify netdevice for resolving XDP hints,
from Larysa Zaremba.
9) Document masking in shift operations for the insn set document,
from Dave Thaler.
10) Extend BPF selftests to check xdp_feature support for bond driver,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
bpf: Fix bad unlock balance on freeze_mutex
libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
libbpf: Ensure libbpf always opens files with O_CLOEXEC
selftests/bpf: Check whether to run selftest
libbpf: Change var type in datasec resize func
bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
libbpf: Selftests for resizing datasec maps
libbpf: Add capability for resizing datasec maps
selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
libbpf: Start v1.3 development cycle
bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
bpftool: Specify XDP Hints ifname when loading program
selftests/bpf: Add xdp_feature selftest for bond device
selftests/bpf: Test bpf_sock_destroy
selftests/bpf: Add helper to get port using getsockname
bpf: Add bpf_sock_destroy kfunc
bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
bpf: udp: Implement batching for sockets iterator
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There have not been a lot of fixes for for the soc tree in 6.4, but
these have been sitting here for too long.
For the devicetree side, there is one minor warning fix for vexpress,
the rest all all for the the NXP i.MX platforms: SoC specific bugfixes
for the iMX8 clocks and its USB-3.0 gadget device, as well as board
specific fixes for regulators and the phy on some of the i.MX boards.
The microchip risc-v and arm32 maintainers now also add a shared
maintainer file entry for the arm64 parts.
The remaining fixes are all for firmware drivers, addressing mistakes
in the optee, scmi and ff-a firmware driver implementation, mostly in
the error handling code, incorrect use of the alloc_workqueue()
interface in SCMI, and compatibility with corner cases of the firmware
implementation"
* tag 'arm-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update arm64 Microchip entries
arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
arm64: dts: colibri-imx8x: delete adc1 and dsp
arm64: dts: colibri-imx8x: fix iris pinctrl configuration
arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
arm64: dts: colibri-imx8x: fix eval board pin configuration
arm64: dts: imx8mp: Fix video clock parents
ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
arm64: dts: imx8mn: Fix video clock parents
firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
firmware: arm_ffa: Fix FFA device names for logical partitions
firmware: arm_ffa: Fix usage of partition info get count flag
firmware: arm_ffa: Check if ffa_driver remove is present before executing
arm64: dts: arm: add missing cache properties
ARM: dts: vexpress: add missing cache properties
firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
optee: fix uninited async notif value
|
|
with commit '7878c231dae0 ("slab: remove /proc/slab_allocators")'
lookup_symbol_attrs usage is removed.
Thus removing redundant API.
Signed-off-by: Maninder Singh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
While struct_size() is normally used in situations where the structure
type already has a pointer instance, there are places where no variable
is available. In the past, this has been worked around by using a typed
NULL first argument, but this is a bit ugly. Add a helper to do this,
and replace the handful of instances of the code pattern with it.
Instances were found with this Coccinelle script:
@struct_size_t@
identifier STRUCT, MEMBER;
expression COUNT;
@@
- struct_size((struct STRUCT *)\(0\|NULL\),
+ struct_size_t(struct STRUCT,
MEMBER, COUNT)
Suggested-by: Christoph Hellwig <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: James Smart <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Cc: HighPoint Linux Team <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: Kashyap Desai <[email protected]>
Cc: Sumit Saxena <[email protected]>
Cc: Shivasharan S <[email protected]>
Cc: Don Brace <[email protected]>
Cc: "Darrick J. Wong" <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Guo Xuenan <[email protected]>
Cc: Gwan-gyeong Mun <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Daniel Latypov <[email protected]>
Cc: kernel test robot <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Reviewed-by: Alexander Lobakin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
More and more drivers rely on devres to manage their resources, however
if bus' probe() and release() methods are not trivial and control some
of resources as well (for example enable or disable clocks, or attach
device to a power domain), we need to make sure that driver-allocated
resources are released immediately after driver's remove() method
returns, and not postponed until driver core gets around to releasing
resources.
In case of HID we should not try to close the report and release
associated memory until after all devres callbacks are executed. To fix
that we open a new devres group before calling driver's probe() and
explicitly release it when we return from driver's remove().
This is similar to what we did for I2C bus in commit 5b5475826c52 ("i2c:
ensure timely release of driver-allocated resources"). It is tempting to
try and move this into driver core, but actually doing so is challenging,
we need to split bus' remove() method into pre- and post-remove methods,
which would make the logic even less clear.
Reported-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.4
Quite a few fixes to address set of assorted issues:
1. NULL pointer dereference if the ffa driver doesn't provide remove()
callback as it is currently executed unconditionally
2. FF-A core probe failure on systems with v1.0 firmware as the new
partition info get count flag is used unconditionally
3. Failure to register more than one logical partition or service within
the same physical partition as the device name contains only VM ID
which will be same for all but each will have unique UUID.
4. Rejection of certain memory interface transmissions by the receivers
(secure partitions) as few MBZ fields are non-zero due to lack of
explicit re-initialization of those fields
* tag 'ffa-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
firmware: arm_ffa: Fix FFA device names for logical partitions
firmware: arm_ffa: Fix usage of partition info get count flag
firmware: arm_ffa: Check if ffa_driver remove is present before executing
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into soc/arm
This removes all usage of global GPIO numbers from
arch/arm/mach-omap[12].
The patches have been reviewed and tested by everyone
who showed interest which was one person that tested
on OSK1 and Nokia 770, and we smoked out the bugs and
also addressed all review comments.
Any remaining problems can certainly be fixed in-tree.
* tag 'gpio-omap-descriptors-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
ARM/musb: omap2: Remove global GPIO numbers from TUSB6010
ARM: omap2: Rewrite WLAN quirk to use GPIO descriptors
ARM: omap2: Get USB hub reset GPIO from descriptor
ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
ARM: omap1: Exorcise the legacy GPIO header
ARM: omap1: Make serial wakeup GPIOs use descriptors
ARM: omap1: Fix up the Nokia 770 board device IRQs
ARM/mmc: Convert old mmci-omap to GPIO descriptors
Input: ads7846 - Convert to use software nodes
ARM: omap1: Remove reliance on GPIO numbers from SX1
ARM: omap1: Remove reliance on GPIO numbers from PalmTE
ARM: omap1: Drop header on AMS Delta
ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The cci_enable_port_for_self() is called from assembler, so
add the prototype only to shut up the W=1 warning:
drivers/bus/arm-cci.c:298:25: error: no previous prototype for 'cci_enable_port_for_self' [-Werror=missing-prototypes]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The PXA platform has a number of configurations that end up with
a warning like these when building with W=1:
drivers/hwmon/max1111.c:83:5: error: no previous prototype for 'max1111_read_channel' [-Werror=missing-prototypes]
arch/arm/mach-pxa/reset.c:86:6: error: no previous prototype for 'pxa_restart' [-Werror=missing-prototypes]
arch/arm/mach-pxa/mfp-pxa2xx.c:254:5: error: no previous prototype for 'keypad_set_wake' [-Werror=missing-prototypes]
drivers/clk/pxa/clk-pxa25x.c:70:14: error: no previous prototype for 'pxa25x_get_clk_frequency_khz' [-Werror=missing-prototypes]
drivers/clk/pxa/clk-pxa25x.c:325:12: error: no previous prototype for 'pxa25x_clocks_init' [-Werror=missing-prototypes]
drivers/clk/pxa/clk-pxa27x.c:74:14: error: no previous prototype for 'pxa27x_get_clk_frequency_khz' [-Werror=missing-prototypes]
drivers/clk/pxa/clk-pxa27x.c:102:6: error: no previous prototype for 'pxa27x_is_ppll_disabled' [-Werror=missing-prototypes]
drivers/clk/pxa/clk-pxa27x.c:470:12: error: no previous prototype for 'pxa27x_clocks_init' [-Werror=missing-prototypes]
arch/arm/mach-pxa/pxa27x.c:44:6: error: no previous prototype for 'pxa27x_clear_otgph' [-Werror=missing-prototypes]
arch/arm/mach-pxa/pxa27x.c:58:6: error: no previous prototype for 'pxa27x_configure_ac97reset' [-Werror=missing-prototypes]
arch/arm/mach-pxa/spitz_pm.c:170:15: error: no previous prototype for 'spitzpm_read_devdata' [-Werror=missing-prototypes]
The problem is that there is a declaration for each of these, but
it's only seen by the caller and not the callee. Moving these
into appropriate header files ensures that both use the same
calling conventions and it avoids the warnings.
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The davinci_cpufreq_init() declaration is only seen by its caller
but not the definition:
drivers/cpufreq/davinci-cpufreq.c:153:12: error: no previous prototype for 'davinci_cpufreq_init'
Move it into the platform_data header that is already used an
interface between the two places.
Acked-by: Bartosz Golaszewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.5:
UAPI Changes:
Cross-subsystem Changes:
* fbdev: Move framebuffer I/O helpers to <asm/fb.h>, fix naming
* firmware: Init sysfb as early as possible
Core Changes:
* DRM scheduler: Rename interfaces
* ttm: Store ttm_device_funcs in .rodata
* Replace strlcpy() with strscpy() in various places
* Cleanups
Driver Changes:
* bridge: analogix: Fix endless probe loop; samsung-dsim: Support
swapping clock/data polarity; tc358767: Use devm_ Cleanups;
* gma500: Fix I/O-memory access
* panel: boe-tv101wum-nl6: Improve initialization; sharp-ls043t1le001:
Mode fixes; simple: Add BOE EV121WXM-N10-1850 plus DT bindings;
AddS6D7AA0 plus DT bindings; Cleanups
* ssd1307x: Style fixes
* sun4i: Release clocks
* msm: Fix I/O-memory access
* nouveau: Cleanups
* shmobile: Support Renesas; Enable framebuffer console; Various fixes
* vkms: Fix RGB565 conversion
Signed-off-by: Dave Airlie <[email protected]>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmRuBXEACgkQaA3BHVML
# eiPLkwgAqCa7IuSDQhFMWVOI0EJpPPEHtHM8SCT1Pp8aniXk23Ru+E16c5zck53O
# uf4tB+zoFrwD9npy60LIvX1OZmXS1KI4+ZO8itYFk6GSjxqbTWbjNFREBeWFdIpa
# OG54nEqjFQZzEXY+gJYDpu5zqLy3xLN07ZgQkcMyfW3O/Krj4LLzfQTDl+jP5wkO
# 7/v5Eu5CG5QjupMxIjb4e+ruUflp73pynur5bhZsfS1bPNGFTnxHlwg7NWnBXU7o
# Hg23UYfCuZZWPmuO26EeUDlN33rCoaycmVgtpdZft2eznca5Mg74Loz1Qc3GQfjw
# LLvKsAIlBcZvEIhElkzhtXitBoe7LQ==
# =/9zV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 May 2023 22:39:13 AEST
# gpg: using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
# Conflicts:
# MAINTAINERS
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524124237.GA25416@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-05-24
This series includes bug fixes for the mlx5 driver.
* tag 'mlx5-fixes-2023-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
Documentation: net/mlx5: Wrap notes in admonition blocks
Documentation: net/mlx5: Add blank line separator before numbered lists
Documentation: net/mlx5: Use bullet and definition lists for vnic counters description
Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocks
net/mlx5: Fix check for allocation failure in comp_irqs_request_pci()
net/mlx5: DR, Add missing mutex init/destroy in pattern manager
net/mlx5e: Move Ethernet driver debugfs to profile init callback
net/mlx5e: Don't attach netdev profile while handling internal error
net/mlx5: Fix post parse infra to only parse every action once
net/mlx5e: Use query_special_contexts cmd only once per mdev
net/mlx5: fw_tracer, Fix event handling
net/mlx5: SF, Drain health before removing device
net/mlx5: Drain health before unregistering devlink
net/mlx5e: Do not update SBCM when prio2buffer command is invalid
net/mlx5e: Consider internal buffers size in port buffer calculations
net/mlx5e: Prevent encap offload when neigh update is running
net/mlx5e: Extract remaining tunnel encap code to dedicated file
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/raw.c
3632679d9e4f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol")
c85be08fc4fa ("raw: Stop using RTO_ONLINK.")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
drivers/net/ethernet/freescale/fec_main.c
9025944fddfe ("net: fec: add dma_wmb to ensure correct descriptor values")
144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It turns out that udev under certain circumstances will concurrently try
to load the same modules over-and-over excessively. This isn't a kernel
bug, but it ends up affecting the kernel, to the point that under
certain circumstances we can fail to boot, because the kernel uses a lot
of memory to read all the module data all at once.
Note that it isn't a memory leak, it's just basically a thundering herd
problem happening at bootup with a lot of CPUs, with the worst cases
then being pretty bad.
Admittedly the worst situations are somewhat contrived: lots and lots of
CPUs, not a lot of memory, and KASAN enabled to make it all slower and
as such (unintentionally) exacerbate the problem.
Luis explains: [1]
"My best assessment of the situation is that each CPU in udev ends up
triggering a load of duplicate set of modules, not just one, but *a
lot*. Not sure what heuristics udev uses to load a set of modules per
CPU."
Petr Pavlu chimes in: [2]
"My understanding is that udev workers are forked. An initial kmod
context is created by the main udevd process but no sharing happens
after the fork. It means that the mentioned memory pool logic doesn't
really kick in.
Multiple parallel load requests come from multiple udev workers, for
instance, each handling an udev event for one CPU device and making
the exactly same requests as all others are doing at the same time.
The optimization idea would be to recognize these duplicate requests
at the udevd/kmod level and converge them"
Note that module loading has tried to mitigate this issue before, see
for example commit 064f4536d139 ("module: avoid allocation if module is
already present and ready"), which has a few ASCII graphs on memory use
due to this same issue.
However, while that noticed that the module was already loaded, and
exited with an error early before spending any more time on setting up
the module, it didn't handle the case of multiple concurrent module
loads all being active - but not complete - at the same time.
Yes, one of them will eventually win the race and finalize its copy, and
the others will then notice that the module already exists and error
out, but while this all happens, we have tons of unnecessary concurrent
work being done.
Again, the real fix is for udev to not do that (maybe it should use
threads instead of fork, and have actual shared data structures and not
cause duplicate work). That real fix is apparently not trivial.
But it turns out that the kernel already has a pretty good model for
dealing with concurrent access to the same file: the i_writecount of the
inode.
In fact, the module loading already indirectly uses 'i_writecount' ,
because 'kernel_file_read()' will in fact do
ret = deny_write_access(file);
if (ret)
return ret;
...
allow_write_access(file);
around the read of the file data. We do not allow concurrent writes to
the file, and return -ETXTBUSY if the file was open for writing at the
same time as the module data is loaded from it.
And the solution to the reader concurrency problem is to simply extend
this "no concurrent writers" logic to simply be "exclusive access".
Note that "exclusive" in this context isn't really some absolute thing:
it's only exclusion from writers and from other "special readers" that
do this writer denial. So we simply introduce a variation of that
"deny_write_access()" logic that not only denies write access, but also
requires that this is the _only_ such access that denies write access.
Which means that you can't start loading a module that is already being
loaded as a module by somebody else, or you will get the same -ETXTBSY
error that you would get if there were writers around.
[ It also means that you can't try to load a currently executing
executable as a module, for the same reason: executables do that same
"deny_write_access()" thing, and that's obviously where the whole
ETXTBSY logic traditionally came from.
This is not a problem for kernel modules, since the set of normal
executable files and kernel module files is entirely disjoint. ]
This new function is called "exclusive_deny_write_access()", and the
implementation is trivial, in that it's just an atomic decrement of
i_writecount if it was 0 before.
To use that new exclusivity check, all we then do is wrap the module
loading with that exclusive_deny_write_access()() / allow_write_access()
pair. The actual patch is a bit bigger than that, because we want to
surround not just the "load file data" part, but the whole module setup,
to get maximum exclusion.
So this ends up splitting up "finit_module()" into a few helper
functions to make it all very clear and legible.
In Luis' test-case (bringing up 255 vcpu's in a virtual machine [3]),
the "wasted vmalloc" space (ie module data read into a vmalloc'ed area
in order to be loaded as a module, but then discarded because somebody
else loaded the same module instead) dropped from 1.8GiB to 474kB. Yes,
that's gigabytes to kilobytes.
It doesn't drop completely to zero, because even with this change, you
can still end up having completely serial pointless module loads, where
one udev process has loaded a module fully (and thus the kernel has
released that exclusive lock on the module file), and then another udev
process tries to load the same module again.
So while we cannot fully get rid of the fundamental bug in user space,
we _can_ get rid of the excessive concurrent thundering herd effect.
A couple of final side notes on this all:
- This tweak only affects the "finit_module()" system call, which gives
the kernel a file descriptor with the module data.
You can also just feed the module data as raw data from user space
with "init_module()" (note the lack of 'f' at the beginning), and
obviously for that case we do _not_ have any "exclusive read" logic.
So if you absolutely want to do things wrong in user space, and try
to load the same module multiple times, and error out only later when
the kernel ends up saying "you can't load the same module name
twice", you can still do that.
And in fact, some distros will do exactly that, because they will
uncompress the kernel module data in user space before feeding it to
the kernel (mainly because they haven't started using the new kernel
side decompression yet).
So this is not some absolute "you can't do concurrent loads of the
same module". It's literally just a very simple heuristic that will
catch it early in case you try to load the exact same module file at
the same time, and in that case avoid a potentially nasty situation.
- There is another user of "deny_write_access()": the verity code that
enables fs-verity on a file (the FS_IOC_ENABLE_VERITY ioctl).
If you use fs-verity and you care about verifying the kernel modules
(which does make sense), you should do it *before* loading said
kernel module. That may sound obvious, but now the implementation
basically requires it. Because if you try to do it concurrently, the
kernel may refuse to load the module file that is being set up by the
fs-verity code.
- This all will obviously mean that if you insist on loading the same
module in parallel, only one module load will succeed, and the others
will return with an error.
That was true before too, but what is different is that the -ETXTBSY
error can be returned *before* the success case of another process
fully loading and instantiating the module.
Again, that might sound obvious, and it is indeed the whole point of
the whole change: we are much quicker to notice the whole "you're
already in the process of loading this module".
So it's very much intentional, but it does mean that if you just
spray the kernel with "finit_module()", and expect that the module is
immediately loaded afterwards without checking the return value, you
are doing something horribly horribly wrong.
I'd like to say that that would never happen, but the whole _reason_
for this commit is that udev is currently doing something horribly
horribly wrong, so ...
Link: https://lore.kernel.org/all/[email protected]/ [1]
Link: https://lore.kernel.org/all/[email protected]/ [2]
Link: https://lore.kernel.org/lkml/ZG%2Fa+nrt4%[email protected]/ [3]
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Petr Pavlu <[email protected]>
Tested-by: Luis Chamberlain <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- During the acl rework we merged this cycle the generic_listxattr()
helper had to be modified in a way that in principle it would allow
for POSIX ACLs to be reported. At least that was the impression we
had initially. Because before the acl rework POSIX ACLs would be
reported if the filesystem did have POSIX ACL xattr handlers in
sb->s_xattr. That logic changed and now we can simply check whether
the superblock has SB_POSIXACL set and if the inode has
inode->i_{default_}acl set report the appropriate POSIX ACL name.
However, we didn't realize that generic_listxattr() was only ever
used by two filesystems. Both of them don't support POSIX ACLs via
sb->s_xattr handlers and so never reported POSIX ACLs via
generic_listxattr() even if they raised SB_POSIXACL and did contain
inodes which had acls set. The example here is nfs4.
As a result, generic_listxattr() suddenly started reporting POSIX
ACLs when it wouldn't have before. Since SB_POSIXACL implies that the
umask isn't stripped in the VFS nfs4 can't just drop SB_POSIXACL from
the superblock as it would also alter umask handling for them.
So just have generic_listxattr() not report POSIX ACLs as it never
did anyway. It's documented as such.
- Our SB_* flags currently use a signed integer and we shift the last
bit causing UBSAN to complain about undefined behavior. Switch to
using unsigned. While the original patch used an explicit unsigned
bitshift it's now pretty common to rely on the BIT() macro in a lot
of headers nowadays. So the patch has been adjusted to use that.
- Add Namjae as ntfs reviewer. They're already active this cycle so
let's make it explicit right now.
* tag 'vfs/v6.4-rc3/misc.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ntfs: Add myself as a reviewer
fs: don't call posix_acl_listxattr in generic_listxattr
fs: fix undefined behavior in bit shift for SB_NOUSER
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and bpf.
Current release - regressions:
- net: fix skb leak in __skb_tstamp_tx()
- eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
Current release - new code bugs:
- handshake:
- fix sock->file allocation
- fix handshake_dup() ref counting
- bluetooth:
- fix potential double free caused by hci_conn_unlink
- fix UAF in hci_conn_hash_flush
Previous releases - regressions:
- core: fix stack overflow when LRO is disabled for virtual
interfaces
- tls: fix strparser rx issues
- bpf:
- fix many sockmap/TCP related issues
- fix a memory leak in the LRU and LRU_PERCPU hash maps
- init the offload table earlier
- eth: mlx5e:
- do as little as possible in napi poll when budget is 0
- fix using eswitch mapping in nic mode
- fix deadlock in tc route query code
Previous releases - always broken:
- udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()
- raw: fix output xfrm lookup wrt protocol
- smc: reset connection when trying to use SMCRv2 fails
- phy: mscc: enable VSC8501/2 RGMII RX clock
- eth: octeontx2-pf: fix TSOv6 offload
- eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"
* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
net: phy: mscc: enable VSC8501/2 RGMII RX clock
net: phy: mscc: remove unnecessary phydev locking
net: phy: mscc: add support for VSC8501
net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
net/handshake: Enable the SNI extension to work properly
net/handshake: Unpin sock->file if a handshake is cancelled
net/handshake: handshake_genl_notify() shouldn't ignore @flags
net/handshake: Fix uninitialized local variable
net/handshake: Fix handshake_dup() ref counting
net/handshake: Remove unneeded check from handshake_dup()
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
docs: netdev: document the existence of the mail bot
net: fix skb leak in __skb_tstamp_tx()
r8169: Use a raw_spinlock_t for the register locks.
page_pool: fix inconsistency for page_pool_ring_[un]lock()
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- Fix power_supply_get_battery_info for devices without parent devices
resulting in NULL pointer dereference
- Fix desktop systems reporting to run on battery once a power-supply
device with device scope appears (e.g. a HID keyboard with a battery)
- Ratelimit debug print about driver not providing data
- Fix race condition related to external_power_changed in multiple
drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx)
- Fix LED trigger switching from blinking to solid-on when charging
finishes
- Fix multiple races in bq27xxx battery driver
- mt6360: handle potential ENOMEM from devm_work_autocancel
- sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit
- rt9467: avoid passing 0 to dev_err_probe
* tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits)
power: supply: Fix logic checking if system is running from battery
power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe
power: supply: sbs-charger: Fix INHIBITED bit for Status reg
power: supply: rt9467: Fix passing zero to 'dev_err_probe'
power: supply: Ratelimit no data debug output
power: supply: Fix power_supply_get_battery_info() if parent is NULL
power: supply: bq24190: Call power_supply_changed() after updating input current
power: supply: bq25890: Call power_supply_changed() after updating input current or voltage
power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()
power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes
power: supply: bq27xxx: Move bq27xxx_battery_update() down
power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()
power: supply: bq27xxx: Fix poll_interval handling and races on remove
power: supply: bq27xxx: Fix I2C IRQ race on remove
power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition
power: supply: leds: Fix blink to LED on transition
power: supply: sc27xx: Fix external_power_changed race
power: supply: bq25890: Fix external_power_changed race
power: supply: axp288_fuel_gauge: Fix external_power_changed race
...
|
|
RTL8723DS comes in two variant and each of them has their own SDIO ID:
- 0xd723 can connect two antennas. The WiFi part is still 1x1 so the
second antenna can be dedicated to Bluetooth
- 0xd724 can only connect one antenna so it's shared between WiFi and
Bluetooth
Add a new entry for the single antenna RTL8723DS (0xd724) which can be
found on the MangoPi MQ-Quad. Also rename the existing RTL8723DS entry
(0xd723) so it's name reflects that it's the variant with support for
two antennas.
Reviewed-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
We want to use IOU_F_TWQ_LAZY_WAKE in commands. First, introduce a new
cmd tw helper accepting TWQ flags, and then add
io_uring_cmd_do_in_task_laz() that will pass IOU_F_TWQ_LAZY_WAKE and
imply the "lazy" semantics, i.e. it posts no more than 1 CQE and
delaying execution of this tw should not prevent forward progress.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/5b9f6716006df7e817f18bd555aee2f8f9c8b0c3.1684154817.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
The AXP313a is a PMIC chip produced by X-Powers, it can be connected via
an I2C bus.
The name AXP1530 seems to appear as well, and this is what is used in
the BSP driver. From all we know it's the same chip, just a different
name. However we have only seen AXP313a chips in the wild, so go with
this name.
Compared to the other AXP PMICs it's a rather simple affair: just three
DCDC converters, three LDOs, and no battery charging support.
Describe the regmap and the MFD bits, along with the registers exposed
via I2C. Aside from the various regulators, also describe the power key
interrupts, and adjust the shutdown handler routine to use a different
register than the other PMICs.
Eventually advertise the device using the new compatible string.
Signed-off-by: Martin Botka <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
led_trigger_blink() calls led_blink_set() from a RCU read-side critical
section so led_blink_set() must not sleep. Note sleeping was not allowed
before the switch to RCU either because a spinlock was held before.
led_blink_set() does not sleep when sw-blinking is used, but
many LED controller drivers with hw blink support have a blink_set
function which may sleep, leading to an oops like this one:
[ 832.605062] ------------[ cut here ]------------
[ 832.605085] Voluntary context switch within RCU read-side critical section!
[ 832.605119] WARNING: CPU: 2 PID: 370 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x4ee/0x690
<snip>
[ 832.606453] Call Trace:
[ 832.606466] <TASK>
[ 832.606487] __schedule+0x9f/0x1480
[ 832.606527] schedule+0x5d/0xe0
[ 832.606549] schedule_timeout+0x79/0x140
[ 832.606572] ? __pfx_process_timeout+0x10/0x10
[ 832.606599] wait_for_completion_timeout+0x6f/0x140
[ 832.606627] i2c_dw_xfer+0x101/0x460
[ 832.606659] ? psi_group_change+0x168/0x400
[ 832.606680] __i2c_transfer+0x172/0x6d0
[ 832.606709] i2c_smbus_xfer_emulated+0x27d/0x9c0
[ 832.606732] ? __schedule+0x430/0x1480
[ 832.606753] ? preempt_count_add+0x6a/0xa0
[ 832.606778] ? get_nohz_timer_target+0x18/0x190
[ 832.606796] ? lock_timer_base+0x61/0x80
[ 832.606817] ? preempt_count_add+0x6a/0xa0
[ 832.606842] __i2c_smbus_xfer+0xa2/0x3f0
[ 832.606862] i2c_smbus_xfer+0x66/0xf0
[ 832.606882] i2c_smbus_read_byte_data+0x41/0x70
[ 832.606901] ? _raw_spin_unlock_irqrestore+0x23/0x40
[ 832.606922] ? __pm_runtime_suspend+0x46/0xc0
[ 832.606946] cht_wc_byte_reg_read+0x2e/0x60
[ 832.606972] _regmap_read+0x5c/0x120
[ 832.606997] _regmap_update_bits+0x96/0xc0
[ 832.607023] regmap_update_bits_base+0x5b/0x90
[ 832.607053] cht_wc_leds_brightness_get+0x412/0x910 [leds_cht_wcove]
[ 832.607094] led_blink_setup+0x28/0x100
[ 832.607119] led_trigger_blink+0x40/0x70
[ 832.607145] power_supply_update_leds+0x1b7/0x1c0
[ 832.607174] power_supply_changed_work+0x67/0xe0
[ 832.607198] process_one_work+0x1c8/0x3c0
[ 832.607222] worker_thread+0x4d/0x380
[ 832.607243] ? __pfx_worker_thread+0x10/0x10
[ 832.607258] kthread+0xe9/0x110
[ 832.607279] ? __pfx_kthread+0x10/0x10
[ 832.607300] ret_from_fork+0x2c/0x50
[ 832.607337] </TASK>
[ 832.607344] ---[ end trace 0000000000000000 ]---
Add a new led_blink_set_nosleep() function which defers the actual
led_blink_set() call to a workqueue when necessary to fix this.
This also fixes an existing race where a pending led_set_brightness() has
been deferred to set_brightness_work and might then race with a later
led_cdev->blink_set() call. Note this race is only an issue with triggers
mixing led_trigger_event() and led_trigger_blink() calls, sysfs API
calls and led_trigger_blink_oneshot() are not affected.
Note rather then adding a separate blink_set_blocking callback this uses
the presence of the already existing brightness_set_blocking callback to
detect if the blinking call should be deferred to set_brightness_work.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Jacek Anaszewski <[email protected]>
Tested-by: Yauhen Kharuzhy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
When a trigger wants to switch from blinking to LED on it needs to call:
led_set_brightness(LED_OFF);
led_set_brightness(LED_FULL);
To first call disables blinking and the second then turns the LED on
(the power-supply charging-blink-full-solid triggers do this).
These calls happen immediately after each other, so it is possible
that set_brightness_delayed() from the first call has not run yet
when the led_set_brightness(LED_FULL) call finishes.
If this race hits then this is causing problems for both
sw- and hw-blinking:
For sw-blinking set_brightness_delayed() clears delayed_set_value
when LED_BLINK_DISABLE is set causing the led_set_brightness(LED_FULL)
call effects to get lost when hitting the race, resulting in the LED
turning off instead of on.
For hw-blinking if the race hits delayed_set_value has been
set to LED_FULL by the time set_brightness_delayed() runs.
So led_cdev->brightness_set_blocking() is never called with
LED_OFF as argument and the hw-blinking is never disabled leaving
the LED blinking instead of on.
Fix both issues by adding LED_SET_BRIGHTNESS and LED_SET_BRIGHTNESS_OFF
work_flags making this 2 separate actions to be run by
set_brightness_delayed().
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Jacek Anaszewski <[email protected]>
Tested-by: Yauhen Kharuzhy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
led_blink_set[_oneshot]()'s delay_on and delay_off function parameters
are pass by reference, so that hw-blink implementations can report
back the actual achieved delays when the values have been rounded
to something the hw supports.
This is really only interesting for the sysfs API / the timer trigger.
Other triggers don't really care about this and none of the callers of
led_trigger_blink[_oneshot]() do anything with the returned delay values.
Change the led_trigger_blink[_oneshot]() delay parameters to pass-by-value,
there are 2 reasons for this:
1. led_cdev->blink_set() may sleep, while led_trigger_blink() may not.
So on hw where led_cdev->blink_set() sleeps the call needs to be deferred
to a workqueue, in which case the actual achieved delays are unknown
(this is a preparation patch for the deferring).
2. Since the callers don't care about the actual achieved delays, allowing
callers to directly pass a value leads to simpler code for most callers.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Jacek Anaszewski <[email protected]>
Tested-by: Yauhen Kharuzhy <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Sebastian Reichel <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
The LP55xx range of devices have an internal charge pump which
can (automatically) increase the output voltage towards the
LED's, boosting the output voltage to 4.5V.
Implement this option from the devicetree. When the setting
is not present it will operate in automatic mode as before.
Tested on LP55231. Datasheet analysis shows that LP5521, LP5523
and LP8501 are identical in topology and are modified in the
same way.
Signed-off-by: Maarten Zanders <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The cper.c file needs to include an extra header, and efi_zboot_entry
needs an extern declaration to avoid these 'make W=1' warnings:
drivers/firmware/efi/libstub/zboot.c:65:1: error: no previous prototype for 'efi_zboot_entry' [-Werror=missing-prototypes]
drivers/firmware/efi/efi.c:176:16: error: no previous prototype for 'efi_attr_is_visible' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:626:6: error: no previous prototype for 'cper_estatus_print' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:649:5: error: no previous prototype for 'cper_estatus_check_header' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:662:5: error: no previous prototype for 'cper_estatus_check' [-Werror=missing-prototypes]
To make this easier, move the cper specific declarations to
include/linux/cper.h.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-05-24
We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).
The main changes are:
1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
from John Fastabend.
2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
from Anton Protopopov.
3) Init the BPF offload table earlier than just late_initcall,
from Jakub Kicinski.
4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
from Will Deacon.
5) Remove a now unsupported __fallthrough in BPF samples,
from Andrii Nakryiko.
6) Fix a typo in pkg-config call for building sign-file,
from Jeremy Sowden.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
bpf, sockmap: Build helper to create connected socket pair
bpf, sockmap: Pull socket helpers out of listen test for general use
bpf, sockmap: Incorrectly handling copied_seq
bpf, sockmap: Wake up polling after data copy
bpf, sockmap: TCP data stall on recv before accept
bpf, sockmap: Handle fin correctly
bpf, sockmap: Improved check for empty queue
bpf, sockmap: Reschedule is now done through backlog
bpf, sockmap: Convert schedule_work into delayed_work
bpf, sockmap: Pass skb ownership through read_skb
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
samples/bpf: Drop unnecessary fallthrough
bpf: netdev: init the offload table earlier
selftests/bpf: Fix pkg-config call building sign-file
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Don't query the firmware so many times (num rqs * num wqes * wqe frags)
because it slows down linearly the interface creation time when the
product is larger. Do it only once per mdev and store the result in
mlx5e_param.
Due to helper function being called from different files, move it to
an appropriate location. Rename the function with a proper prefix and
add a small cleanup.
This fix applies only for legacy rq.
Fixes: 1b1e4868836a ("net/mlx5e: Use query_special_contexts for mkeys")
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Or Har-Toov <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The arch_resume_nosmt() has a __weak definition, plus an x86
specific override, but no prototype that ensures the two have
the same arguments. This causes a W=1 warning:
arch/x86/power/hibernate.c:189:5: error: no previous prototype for 'arch_resume_nosmt' [-Werror=missing-prototypes]
Add the prototype in linux/suspend.h, which is included in
both places.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Move the pm_suspend_target_state definition for CONFIG_SUSPEND
unset from the wakeup code into the headers so as to allow it
to still be used elsewhere when CONFIG_SUSPEND is not set.
Signed-off-by: Kai-Heng Feng <[email protected]>
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Compared with existing RAPL MSR/MMIO Interface, the RAPL TPMI Interface
1. has per Power Limit register, thus has per Power Limit Lock and
Enable bit.
2. doesn't have Power Limit Clamp bit.
3. the Power Limit Lock and Enable bits have different bit offsets.
These mean RAPL TPMI Interface needs its own primitive information.
RAPL TPMI Interface also has per domain unit register but with a
different register layout. This requires a TPMI specific rapl_defaults
call to decode the unit register.
Introduce the RAPL core support for TPMI Interface.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Wang Wendy <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Different RAPL Interfaces may have different primitive information and
rapl_defaults calls.
To better distinguish this difference in the RAPL framework code,
introduce a new enum to represent different types of RAPL Interfaces.
No functional change.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Wang Wendy <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
MSR RAPL Interface always removes a rapl_package when all the CPUs in
that rapl_package are offlined. This is because it relies on an online
CPU to access the MSR.
But for RAPL Interface using MMIO registers, when all the cpus within
the rapl_package are offlined,
1. the register can still be accessed
2. monitoring and setting the Power Pimits for the rapl_package is still
meaningful because of uncore power.
This means that, a valid rapl_package doesn't rely on one or more cpus
being onlined.
For this sense, make cpu optional for rapl_package. A rapl_package can
be registered either using a CPU id to represent the physical
package/die, or using the physical package id directly.
Note that, the thermal throttling interrupt is not disabled via
MSR_IA32_PACKAGE_THERM_INTERRUPT for such rapl_package at the moment.
If it is still needed in the future, this can be achieved by selecting
an onlined CPU using the physical package id.
Note that, processor_thermal_rapl, the current MMIO RAPL Interface
driver, can also be converted to register using a package id instead.
But this is not done right now because processor_thermal_rapl driver
works on single-package systems only, and offlining the only package
will not happen. So keep the previous logic.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Wang Wendy <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
With RAPL MSR/MMIO Interface, each RAPL domain has one Power Limit
register. Each Power Limit register has one lock bit which tells the OS
if the power limit register can be used or not.
Depending on the number of power limits supported by the power limit
register, the lock bit may apply to one or more power limits.
With RAPL TPMI Interface, each RAPL domain has multiple Power Limits,
and each Power Limit has its own register, with a lock bit.
To handle this, introduce support for lock bit per Power Limit.
For existing RAPL MSR/MMIO Interfaces, the lock bit in the Power Limit
register applies to all the Power Limits controlled by this register.
Remove the per domain DOMAIN_STATE_BIOS_LOCKED flag at the same time
because it can be replaced by the per Power Limit lock.
No functional change intended.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Wang Wendy <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The same set of operations are shared by different Powert Limits,
including Power Limit get/set, Power Limit enable/disable, clamping
enable/disable, time window get/set, and max power get/set, etc.
But the same operation for different Power Limit has different
primitives because they use different registers/register bits.
A lot of dirty/duplicate code was introduced to handle this difference.
Introduce a universal way to issue Power Limit operations.
Instead of using hardcoded primitive name directly, use Power Limit id
+ operation type, and hide all the Power Limit difference details in a
central place, get_pl_prim(). Two helpers, rapl_read_pl_data() and
rapl_write_pl_data(), are introduced at the same time to simplify the
code for issuing Power Limit operations.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Wang Wendy <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The same set of operations are shared by different Powert Limits,
including Power Limit get/set, Power Limit enable/disable, clamping
enable/disable, time window get/set, and max power get/set, etc.
But the same operation for different Power Limit has different
primitives because they use different registers/register bits.
A lot of dirty/duplicate code was introduced to handle this difference.
Instead of using hardcoded primitive name directly, using Power Limit id
+ operation type is much cleaner.
For this sense, move POWER_LIMIT1/POWER_LIMIT2/POWER_LIMIT4 to the
beginning of enum rapl_primitives so that they can be reused as
Power Limit ids.
No functional change.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Wang Wendy <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
RAPL MSR/MMIO Interface has package scope unit register but some RAPL
domains like Dram/Psys may use a fixed energy unit value instead of the
default unit value on certain platforms.
RAPL TPMI Interface supports per domain unit register.
For the above reasons, add support for per domain unit register and per
domain energy/power/time unit.
When per domain unit register is not available, use the package scope
unit register as the per domain unit register for each RAPL domain so
that this change is transparent to MSR/MMIO Interface.
No functional change intended.
Signed-off-by: Zhang Rui <[email protected]>
Tested-by: Wang Wendy <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|