| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge updates related to system sleep handling, one power capping update
and one PM utility update for 6.7-rc1:
- Use __get_safe_page() rather than touching the list in hibernation
snapshot code (Brian Geffon).
- Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav).
- Clean up sync_read handling in snapshot_write_next() (Brian Geffon).
- Fix kerneldoc comments for swsusp_check() and swsusp_close() to
better match code (Christoph Hellwig).
- Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
capping driver to pr_debug() (Ville Syrjälä).
- Change the minimum python version for the intel_pstate_tracer utility
from 2.7 to 3.6 (Doug Smythies).
* pm-sleep:
PM: hibernate: fix the kerneldoc comment for swsusp_check() and swsusp_close()
PM: hibernate: Clean up sync_read handling in snapshot_write_next()
PM: sleep: Fix symbol export for _SIMPLE_ variants of _PM_OPS()
PM: hibernate: Use __get_safe_page() rather than touching the list
* powercap:
powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()
* pm-tools:
tools/power/x86/intel_pstate_tracer: python minimum version
|
|
Merge cpufreq updates for 6.7-rc1:
- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan).
- Clean up the tegra cpufreq driver (Sumit Gupta).
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
Herring).
- Add support for TI's am62p5 Soc (Bryan Brattlof).
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli).
- Update Kconfig to mention i.MX7 as well (Alexander Stein).
- Revise global turbo disable check in intel_pstate (Srinivas
Pandruvada).
- Carry out initialization of sg_cpu in the schedutil cpufreq governor
in one loop (Liao Chang).
- Simplify the condition for storing 'down_threshold' in the
conservative cpufreq governor (Liao Chang).
- Use fine-grained mutex in the userspace cpufreq governor (Liao
Chang).
- Move is_managed indicator in the userspace cpufreq governor into a
per-policy structure (Liao Chang).
- Rebuild sched-domains when removing cpufreq driver (Pierre Gondois).
- Fix buffer overflow detection in trans_stats() (Christian Marangi).
* pm-cpufreq: (32 commits)
dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
cpufreq: qcom-nvmem: add support for IPQ8064
cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
cpufreq: qcom-nvmem: add support for IPQ6018
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
cpufreq: qcom-nvmem: Add MSM8909
cpufreq: qcom-nvmem: Simplify driver data allocation
cpufreq: stats: Fix buffer overflow detection in trans_stats()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
cpufreq: ARM_BRCMSTB_AVS_CPUFREQ cannot be used with ARM_SCMI_CPUFREQ
cpufreq: ti-cpufreq: Add opp support for am62p5 SoCs
cpufreq: dt-platdev: add am62p5 to blocklist
cpufreq: tegra194: remove redundant AND with cpu_online_mask
cpufreq: tegra194: use refclk delta based loop instead of udelay
cpufreq: tegra194: save CPU data to avoid repeated SMP calls
cpufreq: Rebuild sched-domains when removing cpufreq driver
cpufreq: userspace: Move is_managed indicator into per-policy structure
...
|
|
Merge updates of the ACPI AC and ACPI PAD drivers and PNP updates for
6.7-rc1:
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski).
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt).
- Clean up coding style in pnp.h (GuoHua Cheng).
* acpi-ac:
ACPI: AC: Rename ACPI device from device to adev
ACPI: AC: Replace acpi_driver with platform_driver
ACPI: AC: Use string_choices API instead of ternary operator
ACPI: AC: Remove redundant checks
* acpi-pad:
ACPI: acpi_pad: Rename ACPI device from device to adev
ACPI: acpi_pad: Use dev groups for sysfs
ACPI: acpi_pad: Replace acpi_driver with platform_driver
* pnp:
PNP: replace deprecated strncpy() with memcpy()
PNP: ACPI: replace deprecated strncpy() with strscpy()
PNP: Clean up coding style in pnp.h
|
|
Merge ACPI EC driver updates, ACPI sysfs interface updates, misc updates
related to ACPI and changes related to ACPI _UID handling for 6.7-rc1:
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose).
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET).
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav).
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav).
* acpi-ec:
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
* acpi-sysfs:
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
* acpi-misc:
ACPI: x86: s2idle: Switch to use acpi_evaluate_dsm_typed()
ACPI: PCI: Switch to use acpi_evaluate_dsm_typed()
* acpi-uid:
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
|
|
commit ef8dd01538ea ("genirq/msi: Make interrupt allocation less
convoluted"), reworked the code so that the x86 specific quirk for affinity
setting of non-maskable PCI/MSI interrupts is not longer activated if
necessary.
This could be solved by restoring the original logic in the core MSI code,
but after a deeper analysis it turned out that the quirk flag is not
required at all.
The quirk is only required when the PCI/MSI device cannot mask the MSI
interrupts, which in turn also prevents reservation mode from being enabled
for the affected interrupt.
This allows ot remove the NOMASK quirk bit completely as msi_set_affinity()
can instead check whether reservation mode is enabled for the interrupt,
which gives exactly the same answer.
Even in the momentary non-existing case that the reservation mode would be
not set for a maskable MSI interrupt this would not cause any harm as it
just would cause msi_set_affinity() to go needlessly through the
functionaly equivalent slow path, which works perfectly fine with maskable
interrupts as well.
Rework msi_set_affinity() to query the reservation mode and remove all
NOMASK quirk logic from the core code.
[ tglx: Massaged changelog ]
Fixes: ef8dd01538ea ("genirq/msi: Make interrupt allocation less convoluted")
Suggested-by: Thomas Gleixner <[email protected]>
Signed-off-by: Koichiro Den <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
mbind(2) holds down_write of current task's mmap_lock throughout
(exclusive because it needs to set the new mempolicy on the vmas);
migrate_pages(2) holds down_read of pid's mmap_lock throughout.
They both hold mmap_lock across the internal migrate_pages(), under which
all new page allocations (huge or small) are made. I'm nervous about it;
and migrate_pages() certainly does not need mmap_lock itself. It's done
this way for mbind(2), because its page allocator is vma_alloc_folio() or
alloc_hugetlb_folio_vma(), both of which depend on vma and address.
Now that we have alloc_pages_mpol(), depending on (refcounted) memory
policy and interleave index, mbind(2) can be modified to use that or
alloc_hugetlb_folio_nodemask(), and then not need mmap_lock across the
internal migrate_pages() at all: add alloc_migration_target_by_mpol() to
replace mbind's new_page().
(After that change, alloc_hugetlb_folio_vma() is used by nothing but a
userfaultfd function: move it out of hugetlb.h and into the #ifdef.)
migrate_pages(2) has chosen its target node before migrating, so can
continue to use the standard alloc_migration_target(); but let it take and
drop mmap_lock just around migrate_to_node()'s queue_pages_range():
neither the node-to-node calculations nor the page migrations need it.
It seems unlikely, but it is conceivable that some userspace depends on
the kernel's mmap_lock exclusion here, instead of doing its own locking:
more likely in a testsuite than in real life. It is also possible, of
course, that some pages on the list will be munmapped by another thread
before they are migrated, or a newer memory policy applied to the range by
that time: but such races could happen before, as soon as mmap_lock was
dropped, so it does not appear to be a concern.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Sidhartha Kumar <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tejun heo <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yosry Ahmed <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Shrink shmem's stack usage by eliminating the pseudo-vma from its folio
allocation. alloc_pages_mpol(gfp, order, pol, ilx, nid) becomes the
principal actor for passing mempolicy choice down to __alloc_pages(),
rather than vma_alloc_folio(gfp, order, vma, addr, hugepage).
vma_alloc_folio() and alloc_pages() remain, but as wrappers around
alloc_pages_mpol(). alloc_pages_bulk_*() untouched, except to provide the
additional args to policy_nodemask(), which subsumes policy_node().
Cleanup throughout, cutting out some unhelpful "helpers".
It would all be much simpler without MPOL_INTERLEAVE, but that adds a
dynamic to the constant mpol: complicated by v3.6 commit 09c231cb8bfd
("tmpfs: distribute interleave better across nodes"), which added ino bias
to the interleave, hidden from mm/mempolicy.c until this commit.
Hence "ilx" throughout, the "interleave index". Originally I thought it
could be done just with nid, but that's wrong: the nodemask may come from
the shared policy layer below a shmem vma, or it may come from the task
layer above a shmem vma; and without the final nodemask then nodeid cannot
be decided. And how ilx is applied depends also on page order.
The interleave index is almost always irrelevant unless MPOL_INTERLEAVE:
with one exception in alloc_pages_mpol(), where the NO_INTERLEAVE_INDEX
passed down from vma-less alloc_pages() is also used as hint not to use
THP-style hugepage allocation - to avoid the overhead of a hugepage arg
(though I don't understand why we never just added a GFP bit for THP - if
it actually needs a different allocation strategy from other pages of the
same order). vma_alloc_folio() still carries its hugepage arg here, but
it is not used, and should be removed when agreed.
get_vma_policy() no longer allows a NULL vma: over time I believe we've
eradicated all the places which used to need it e.g. swapoff and madvise
used to pass NULL vma to read_swap_cache_async(), but now know the vma.
[[email protected]: handle NULL mpol being passed to __read_swap_cache_async()]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Sidhartha Kumar <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tejun heo <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yosry Ahmed <[email protected]>
Cc: Domenico Cerasuolo <[email protected]>
Cc: Johannes Weiner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Prefer the more explicit "pgoff_t" to "unsigned long" when dealing with a
shared mempolicy tree. Delete confusing comment about pseudo mm vmas.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Sidhartha Kumar <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tejun heo <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yosry Ahmed <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Before getting down to work, do a little cleanup, mainly of inconsistent
variable naming. I gave up trying to rationalize mpol versus pol versus
policy, and node versus nid, but let's avoid p and nd. Remove a few
superfluous blank lines, but add one; and here prefer vma->vm_policy to
vma_policy(vma) - the latter being appropriate in other sources, which
have to allow for !CONFIG_NUMA. That intriguing line about KERNEL_DS?
should have gone in v2.6.15, when numa_policy_init() stopped using
set_mempolicy(2)'s system call handler.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Sidhartha Kumar <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tejun heo <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yosry Ahmed <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mempolicy: cleanups leading to NUMA mpol without vma", v2.
Mostly cleanups in mm/mempolicy.c, but finally removing the pseudo-vma
from shmem folio allocation, and removing the mmap_lock around folio
migration for mbind and migrate_pages syscalls.
This patch (of 12):
hugetlbfs_fallocate() goes through the motions of pasting a shared NUMA
mempolicy onto its pseudo-vma, but how could there ever be a shared NUMA
mempolicy for this file? hugetlb_vm_ops has never offered a set_policy
method, and hugetlbfs_parse_param() has never supported any mpol options
for a mount-wide default policy.
It's just an illusion: clean it away so as not to confuse others, giving
us more freedom to adjust shmem's set_policy/get_policy implementation.
But hugetlbfs_inode_info is still required, just to accommodate seals.
Yes, shared NUMA mempolicy support could be added to hugetlbfs, with a
set_policy method and/or mpol mount option (Andi's first posting did
include an admitted-unsatisfactory hugetlb_set_policy()); but it seems
that nobody has bothered to add that in the nineteen years since v2.6.7
made it possible, and there is at least one company that has invested
enough into hugetlbfs, that I guess they have learnt well enough how to
manage its NUMA, without needing shared mempolicy.
Remove linux/mempolicy.h from linux/hugetlb.h: include linux/pagemap.h in
its place, because hugetlb.h's recently added use of filemap_lock_folio()
requires that (although most .configs and .c's get it in some other way).
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Sidhartha Kumar <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Tejun heo <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Yosry Ahmed <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "avoid divide-by-zero due to max_nr_accesses overflow".
The maximum nr_accesses of given DAMON context can be calculated by
dividing the aggregation interval by the sampling interval. Some logics
in DAMON uses the maximum nr_accesses as a divisor. Hence, the value
shouldn't be zero. Such case is avoided since DAMON avoids setting the
agregation interval as samller than the sampling interval. However, since
nr_accesses is unsigned int while the intervals are unsigned long, the
maximum nr_accesses could be zero while casting.
Avoid the divide-by-zero by implementing a function that handles the
corner case (first patch), and replaces the vulnerable direct max
nr_accesses calculations (remaining patches).
Note that the patches for the replacements are divided for broken commits,
to make backporting on required tres easier. Especially, the last patch
is for a patch that not yet merged into the mainline but in mm tree.
This patch (of 4):
The maximum nr_accesses of given DAMON context can be calculated by
dividing the aggregation interval by the sampling interval. Some logics
in DAMON uses the maximum nr_accesses as a divisor. Hence, the value
shouldn't be zero. Such case is avoided since DAMON avoids setting the
agregation interval as samller than the sampling interval. However, since
nr_accesses is unsigned int while the intervals are unsigned long, the
maximum nr_accesses could be zero while casting. Implement a function
that handles the corner case.
Note that this commit is not fixing the real issue since this is only
introducing the safe function that will replaces the problematic
divisions. The replacements will be made by followup commits, to make
backporting on stable series easier.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 198f0f4c58b9 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <[email protected]>
Reported-by: Jakub Acs <[email protected]>
Cc: <[email protected]> [5.16+]
Signed-off-by: Andrew Morton <[email protected]>
|
|
Also remove count_memcg_page_event now that its last caller no longer uses
it and reword hpage_collapse_alloc_page() to hpage_collapse_alloc_folio().
This removes 1 call to compound_head() and helps convert khugepaged to
use folios throughout.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vishal Moola (Oracle) <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since kmemleak_alloc_phys() rather than kmemleak_alloc() was called from
memblock_alloc_range_nid(), kmemleak_free_part_phys() should be used to
delete kmemleak object in free_bootmem_page(). In debug mode, there are
following warning:
kmemleak: Partially freeing unknown object at 0xffff97345aff7000 (size 4096)
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 028725e73375 ("bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page")
Signed-off-by: Liu Shixin <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Patrick Wang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since all calls use folio_xchg_last_cpupid(), remove
page_cpupid_xchg_last().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Make finish_mkwrite_fault static since it is not used outside of
memory.c.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add folio_xchg_last_cpupid() wrapper, which is required to convert
page_cpupid_xchg_last() to folio vertion later in the series.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since all calls use folio_xchg_access_time(), remove
xchg_page_access_time().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add folio_xchg_access_time() wrapper, which is required to convert
xchg_page_access_time() to folio vertion later in the series.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since all calls use folio_last_cpupid(), remove page_cpupid_last().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add folio_last_cpupid() wrapper, which is required to convert
page_cpupid_last() to folio vertion later in the series.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm: convert page cpupid functions to folios", v3.
The cpupid(or access time) used by numa balancing is stored in flags or
_last_cpupid(if LAST_CPUPID_NOT_IN_PAGE_FLAGS) of page, this is to convert
page cpupid to folio cpupid, a new _last_cpupid is added into folio, which
make us to use folio->_last_cpupid directly, and the page cpupid functions
are converted to folio ones.
page_cpupid_last() -> folio_last_cpupid()
xchg_page_access_time() -> folio_xchg_access_time()
page_cpupid_xchg_last() -> folio_xchg_last_cpupid()
This patch (of 19):
If WANT_PAGE_VIRTUAL and LAST_CPUPID_NOT_IN_PAGE_FLAGS defined, the
'virtual' and '_last_cpupid' are in struct page, and since _last_cpupid is
used by numa balancing feature, it is better to move it before KMSAN
metadata from struct page, also add them into struct folio to make us to
access them from folio directly.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Reimplement get_obj_cgroup_from_current() using current_obj_cgroup().
get_obj_cgroup_from_current() and current_obj_cgroup() share 80% of the
code, so the new implementation is almost trivial.
get_obj_cgroup_from_current() is a convenient function used by the
bpf subsystem, so there is no reason to get rid of it completely.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Naresh Kamboju <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Switch to a scope-based protection of the objcg pointer on slab/kmem
allocation paths. Instead of using the get_() semantics in the
pre-allocation hook and put the reference afterwards, let's rely on the
fact that objcg is pinned by the scope.
It's possible because:
1) if the objcg is received from the current task struct, the task is
keeping a reference to the objcg.
2) if the objcg is received from an active memcg (remote charging),
the memcg is pinned by the scope and has a reference to the
corresponding objcg.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Keep a reference to the original objcg object for the entire life of a
memcg structure.
This allows to simplify the synchronization on the kernel memory
allocation paths: pinning a (live) memcg will also pin the corresponding
objcg.
The memory overhead of this change is minimal because object cgroups
usually outlive their corresponding memory cgroups even without this
change, so it's only an additional pointer per memcg.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
To charge a freshly allocated kernel object to a memory cgroup, the kernel
needs to obtain an objcg pointer. Currently it does it indirectly by
obtaining the memcg pointer first and then calling to
__get_obj_cgroup_from_memcg().
Usually tasks spend their entire life belonging to the same object cgroup.
So it makes sense to save the objcg pointer on task_struct directly, so
it can be obtained faster. It requires some work on fork, exit and cgroup
migrate paths, but these paths are way colder.
To avoid any costly synchronization the following rules are applied:
1) A task sets it's objcg pointer itself.
2) If a task is being migrated to another cgroup, the least
significant bit of the objcg pointer is set atomically.
3) On the allocation path the objcg pointer is obtained locklessly
using the READ_ONCE() macro and the least significant bit is
checked. If it's set, the following procedure is used to update
it locklessly:
- task->objcg is zeroed using cmpxcg
- new objcg pointer is obtained
- task->objcg is updated using try_cmpxchg
- operation is repeated if try_cmpxcg fails
It guarantees that no updates will be lost if task migration
is racing against objcg pointer update. It also allows to keep
both read and write paths fully lockless.
Because the task is keeping a reference to the objcg, it can't go away
while the task is alive.
This commit doesn't change the way the remote memcg charging works.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
In current PCP auto-tuning design, if the number of pages allocated is
much more than that of pages freed on a CPU, the PCP high may become the
maximal value even if the allocating/freeing depth is small, for example,
in the sender of network workloads. If a CPU was used as sender
originally, then it is used as receiver after context switching, we need
to fill the whole PCP with maximal high before triggering PCP draining for
consecutive high order freeing. This will hurt the performance of some
network workloads.
To solve the issue, in this patch, we will track the consecutive page
freeing with a counter in stead of relying on PCP draining. So, we can
detect consecutive page freeing much earlier.
On a 2-socket Intel server with 128 logical CPU, we tested
SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes.
With the patch, the network bandwidth improves 5.0%. This restores the
performance drop caused by PCP auto-tuning.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
One target of PCP is to minimize pages in PCP if the system free pages is
too few. To reach that target, when page reclaiming is active for the
zone (ZONE_RECLAIM_ACTIVE), we will stop increasing PCP high in allocating
path, decrease PCP high and free some pages in freeing path. But this may
be too late because the background page reclaiming may introduce latency
for some workloads. So, in this patch, during page allocation we will
detect whether the number of free pages of the zone is below high
watermark. If so, we will stop increasing PCP high in allocating path,
decrease PCP high and free some pages in freeing path. With this, we can
reduce the possibility of the premature background page reclaiming caused
by too large PCP.
The high watermark checking is done in allocating path to reduce the
overhead in hotter freeing path.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The target to tune PCP high automatically is as follows,
- Minimize allocation/freeing from/to shared zone
- Minimize idle pages in PCP
- Minimize pages in PCP if the system free pages is too few
To reach these target, a tuning algorithm as follows is designed,
- When we refill PCP via allocating from the zone, increase PCP high.
Because if we had larger PCP, we could avoid to allocate from the
zone.
- In periodic vmstat updating kworker (via refresh_cpu_vm_stats()),
decrease PCP high to try to free possible idle PCP pages.
- When page reclaiming is active for the zone, stop increasing PCP
high in allocating path, decrease PCP high and free some pages in
freeing path.
So, the PCP high can be tuned to the page allocating/freeing depth of
workloads eventually.
One issue of the algorithm is that if the number of pages allocated is
much more than that of pages freed on a CPU, the PCP high may become the
maximal value even if the allocating/freeing depth is small. But this
isn't a severe issue, because there are no idle pages in this case.
One alternative choice is to increase PCP high when we drain PCP via
trying to free pages to the zone, but don't increase PCP high during PCP
refilling. This can avoid the issue above. But if the number of pages
allocated is much less than that of pages freed on a CPU, there will be
many idle pages in PCP and it is hard to free these idle pages.
1/8 (>> 3) of PCP high will be decreased periodically. The value 1/8 is
kind of arbitrary. Just to make sure that the idle PCP pages will be
freed eventually.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
build time decreases 3.5%. The cycles% of the spinlock contention (mostly
for zone lock) decreases from 11.0% to 0.5%. The number of PCP draining
for high order pages freeing (free_high) decreases 65.6%. The number of
pages allocated from zone (instead of from PCP) decreases 83.9%.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Suggested-by: Mel Gorman <[email protected]>
Suggested-by: Michal Hocko <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The page allocation performance requirements of different workloads are
usually different. So, we need to tune PCP (per-CPU pageset) high to
optimize the workload page allocation performance. Now, we have a system
wide sysctl knob (percpu_pagelist_high_fraction) to tune PCP high by hand.
But, it's hard to find out the best value by hand. And one global
configuration may not work best for the different workloads that run on
the same system. One solution to these issues is to tune PCP high of each
CPU automatically.
This patch adds the framework for PCP high auto-tuning. With it,
pcp->high of each CPU will be changed automatically by tuning algorithm at
runtime. The minimal high (pcp->high_min) is the original PCP high value
calculated based on the low watermark pages. While the maximal high
(pcp->high_max) is the PCP high value when percpu_pagelist_high_fraction
sysctl knob is set to MIN_PERCPU_PAGELIST_HIGH_FRACTION. That is, the
maximal pcp->high that can be set via sysctl knob by hand.
It's possible that PCP high auto-tuning doesn't work well for some
workloads. So, when PCP high is tuned by hand via the sysctl knob, the
auto-tuning will be disabled. The PCP high set by hand will be used
instead.
This patch only adds the framework, so pcp->high will be set to
pcp->high_min (original default) always. We will add actual auto-tuning
algorithm in the following patches in the series.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When a task is allocating a large number of order-0 pages, it may acquire
the zone->lock multiple times allocating pages in batches. This may
unnecessarily contend on the zone lock when allocating very large number
of pages. This patch adapts the size of the batch based on the recent
pattern to scale the batch size for subsequent allocations.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
cycles% of the spinlock contention (mostly for zone lock) decreases from
12.6% to 11.0% (with PCP size == 367).
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Suggested-by: Mel Gorman <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
In commit f26b3fa04611 ("mm/page_alloc: limit number of high-order pages
on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when
PCP is mostly used for high-order pages freeing to improve the cache-hot
pages reusing between page allocating and freeing CPUs.
On system with small per-CPU data cache slice, pages shouldn't be cached
before draining to guarantee cache-hot. But on a system with large
per-CPU data cache slice, some pages can be cached before draining to
reduce zone lock contention.
So, in this patch, instead of draining without any caching, "pcp->batch"
pages will be cached in PCP before draining if the size of the per-CPU
data cache slice is more than "3 * batch".
In theory, if the size of per-CPU data cache slice is more than "2 *
batch", we can reuse cache-hot pages between CPUs. But considering the
other usage of cache (code, other data accessing, etc.), "3 * batch" is
used.
Note: "3 * batch" is chosen to make sure the optimization works on recent
x86_64 server CPUs. If you want to increase it, please check whether it
breaks the optimization.
On a 2-socket Intel server with 128 logical CPU, with the patch, the
network bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite
with 16-pair processes increase 70.5%. The cycles% of the spinlock
contention (mostly for zone lock) decreases from 46.1% to 21.3%. The
number of PCP draining for high order pages freeing (free_high) decreases
89.9%. The cache miss rate keeps 0.2%.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This can be used to estimate the size of the data cache slice that can be
used by one CPU under ideal circumstances. Both DATA caches and UNIFIED
caches are used in calculation. So, the users need to consider the impact
of the code cache usage.
Because the cache inclusive/non-inclusive information isn't available now,
we just use the size of the per-CPU slice of LLC to make the result more
predictable across architectures. This may be improved when more cache
information is available in the future.
A brute-force algorithm to iterate all online CPUs is used to avoid to
allocate an extra cpumask, especially in offline callback.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm: PCP high auto-tuning", v3.
The page allocation performance requirements of different workloads are
often different. So, we need to tune the PCP (Per-CPU Pageset) high on
each CPU automatically to optimize the page allocation performance.
The list of patches in series is as follows,
[1/9] mm, pcp: avoid to drain PCP when process exit
[2/9] cacheinfo: calculate per-CPU data cache size
[3/9] mm, pcp: reduce lock contention for draining high-order pages
[4/9] mm: restrict the pcp batch scale factor to avoid too long latency
[5/9] mm, page_alloc: scale the number of pages that are batch allocated
[6/9] mm: add framework for PCP high auto-tuning
[7/9] mm: tune PCP high automatically
[8/9] mm, pcp: decrease PCP high if free pages < high watermark
[9/9] mm, pcp: reduce detecting time of consecutive high order page freeing
Patch [1/9], [2/9], [3/9] optimize the PCP draining for consecutive
high-order pages freeing.
Patch [4/9], [5/9] optimize batch freeing and allocating.
Patch [6/9], [7/9], [8/9] implement and optimize a PCP high
auto-tuning method.
Patch [9/9] optimize the PCP draining for consecutive high order page
freeing based on PCP high auto-tuning.
The test results for patches with performance impact are as follows,
kbuild
======
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service.
build time lock contend% free_high alloc_zone
---------- ---------- --------- ----------
base 100.0 14.0 100.0 100.0
patch1 99.5 12.8 19.5 95.6
patch3 99.4 12.6 7.1 95.6
patch5 98.6 11.0 8.1 97.1
patch7 95.1 0.5 2.8 15.6
patch9 95.0 1.0 8.8 20.0
The PCP draining optimization (patch [1/9], [3/9]) and PCP batch
allocation optimization (patch [5/9]) reduces zone lock contention a
little. The PCP high auto-tuning (patch [7/9], [9/9]) reduces build time
visibly. Where the tuning target: the number of pages allocated from zone
reduces greatly. So, the zone contention cycles% reduces greatly.
With PCP tuning patches (patch [7/9], [9/9]), the average used memory
during test increases up to 18.4% because more pages are cached in PCP.
But at the end of the test, the number of the used memory decreases to the
same level as that of the base patch. That is, the pages cached in PCP
will be released to zone after not being used actively.
netperf SCTP_STREAM_MANY
========================
On a 2-socket Intel server with 128 logical CPU, we tested
SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes.
score lock contend% free_high alloc_zone cache miss rate%
----- ---------- --------- ---------- ----------------
base 100.0 2.1 100.0 100.0 1.3
patch1 99.4 2.1 99.4 99.4 1.3
patch3 106.4 1.3 13.3 106.3 1.3
patch5 106.0 1.2 13.2 105.9 1.3
patch7 103.4 1.9 6.7 90.3 7.6
patch9 108.6 1.3 13.7 108.6 1.3
The PCP draining optimization (patch [1/9]+[3/9]) improves performance.
The PCP high auto-tuning (patch [7/9]) reduces performance a little
because PCP draining cannot be triggered in time sometimes. So, the cache
miss rate% increases. The further PCP draining optimization (patch [9/9])
based on PCP tuning restore the performance.
lmbench3 UNIX (AF_UNIX)
=======================
On a 2-socket Intel server with 128 logical CPU, we tested UNIX
(AF_UNIX socket) test case of lmbench3 test suite with 16-pair
processes.
score lock contend% free_high alloc_zone cache miss rate%
----- ---------- --------- ---------- ----------------
base 100.0 51.4 100.0 100.0 0.2
patch1 116.8 46.1 69.5 104.3 0.2
patch3 199.1 21.3 7.0 104.9 0.2
patch5 200.0 20.8 7.1 106.9 0.3
patch7 191.6 19.9 6.8 103.8 2.8
patch9 193.4 21.7 7.0 104.7 2.1
The PCP draining optimization (patch [1/9], [3/9]) improves performance
much. The PCP tuning (patch [7/9]) reduces performance a little because
PCP draining cannot be triggered in time sometimes. The further PCP
draining optimization (patch [9/9]) based on PCP tuning restores the
performance partly.
The patchset adds several fields in struct per_cpu_pages. The struct
layout before/after the patchset is as follows,
base
====
struct per_cpu_pages {
spinlock_t lock; /* 0 4 */
int count; /* 4 4 */
int high; /* 8 4 */
int batch; /* 12 4 */
short int free_factor; /* 16 2 */
short int expire; /* 18 2 */
/* XXX 4 bytes hole, try to pack */
struct list_head lists[13]; /* 24 208 */
/* size: 256, cachelines: 4, members: 7 */
/* sum members: 228, holes: 1, sum holes: 4 */
/* padding: 24 */
} __attribute__((__aligned__(64)));
patched
=======
struct per_cpu_pages {
spinlock_t lock; /* 0 4 */
int count; /* 4 4 */
int high; /* 8 4 */
int high_min; /* 12 4 */
int high_max; /* 16 4 */
int batch; /* 20 4 */
u8 flags; /* 24 1 */
u8 alloc_factor; /* 25 1 */
u8 expire; /* 26 1 */
/* XXX 1 byte hole, try to pack */
short int free_count; /* 28 2 */
/* XXX 2 bytes hole, try to pack */
struct list_head lists[13]; /* 32 208 */
/* size: 256, cachelines: 4, members: 11 */
/* sum members: 237, holes: 2, sum holes: 3 */
/* padding: 16 */
} __attribute__((__aligned__(64)));
The size of the struct doesn't changed with the patchset.
This patch (of 9):
In commit f26b3fa04611 ("mm/page_alloc: limit number of high-order pages
on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when
PCP is mostly used for high-order pages freeing to improve the cache-hot
pages reusing between page allocation and freeing CPUs.
But, the PCP draining mechanism may be triggered unexpectedly when process
exits. With some customized trace point, it was found that PCP draining
(free_high == true) was triggered with the order-1 page freeing with the
following call stack,
=> free_unref_page_commit
=> free_unref_page
=> __mmdrop
=> exit_mm
=> do_exit
=> do_group_exit
=> __x64_sys_exit_group
=> do_syscall_64
Checking the source code, this is the page table PGD freeing
(mm_free_pgd()). It's a order-1 page freeing if
CONFIG_PAGE_TABLE_ISOLATION=y. Which is a common configuration for
security.
Just before that, page freeing with the following call stack was found,
=> free_unref_page_commit
=> free_unref_page_list
=> release_pages
=> tlb_batch_pages_flush
=> tlb_finish_mmu
=> exit_mmap
=> __mmput
=> exit_mm
=> do_exit
=> do_group_exit
=> __x64_sys_exit_group
=> do_syscall_64
So, when a process exits,
- a large number of user pages of the process will be freed without
page allocation, it's highly possible that pcp->free_factor becomes >
0. In fact, this is expected behavior to improve process exit
performance.
- after freeing all user pages, the PGD will be freed, which is a
order-1 page freeing, PCP will be drained.
All in all, when a process exits, it's high possible that the PCP will be
drained. This is an unexpected behavior.
To avoid this, in the patch, the PCP draining will only be triggered for 2
consecutive high-order page freeing.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
cycles% of the spinlock contention (mostly for zone lock) decreases from
14.0% to 12.8% (with PCP size == 367). The number of PCP draining for
high order pages freeing (free_high) decreases 80.5%.
This helps network workload too for reduced zone lock contention. On a
2-socket Intel server with 128 logical CPU, with the patch, the network
bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite with
16-pair processes increase 16.8%. The cycles% of the spinlock contention
(mostly for zone lock) decreases from 51.4% to 46.1%. The number of PCP
draining for high order pages freeing (free_high) decreases 30.5%. The
cache miss rate keeps 0.2%.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Huang, Ying" <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sudeep Holla <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
With all users converted, remove the old create_empty_buffers() and rename
folio_create_empty_buffers() to create_empty_buffers().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Cc: Andreas Gruenbacher <[email protected]>
Cc: Pankaj Raghav <[email protected]>
Cc: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Extract this useful helper from nilfs_page_get_nth_block()
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: Ryusuke Konishi <[email protected]>
Cc: Andreas Gruenbacher <[email protected]>
Cc: Pankaj Raghav <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "Finish the create_empty_buffers() transition", v2.
Pankaj recently added folio_create_empty_buffers() as the folio equivalent
to create_empty_buffers(). This patch set finishes the conversion by
first converting all remaining filesystems to call
folio_create_empty_buffers(), then renaming it back to
create_empty_buffers(). I took the opportunity to make a few
simplifications like making folio_create_empty_buffers() return the head
buffer and extracting get_nth_bh() from nilfs2.
A few of the patches in this series aren't directly related to
create_empty_buffers(), but I saw them while I was working on this and
thought they'd be easy enough to add to this series. Compile-tested only,
other than ext4.
This patch (of 26):
Almost all callers want to know the first BH that was allocated for this
folio. We already have that handy, so return it.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Pankaj Raghav <[email protected]>
Cc: Andreas Gruenbacher <[email protected]>
Cc: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.7
The Qualcomm SMC an QSEECOM drivers are moved into a "qcom"
subdirectory, to declutter the base directory. Missing include guards
are added to the qseecom header file. Unneded extern specifiers are
removed from the scm call wrappers.
__counted_by is added to the apr_rx_buf structure, in the APR driver.
Lastly in the pmic_glink driver the pmic_glink drm_bridge type is
corrected to DisplayPort, over the incorrect "USB" value. The return
values are added to error prints for the various typec set() calls.
* tag 'qcom-drivers-for-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
firmware: qcom: qseecom: add missing include guards
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Today we got a report at [1] for rcu stalls on the i915 testsuite in [2]
due to the conversion of files to SLAB_TYPSSAFE_BY_RCU. Afaict,
get_file_rcu() goes into an infinite loop trying to carefully verify
that i915->gem.mmap_singleton hasn't changed - see the splat below.
So I stared at this code to figure out what it actually does. It seems
that the i915->gem.mmap_singleton pointer itself never had rcu semantics.
The i915->gem.mmap_singleton is replaced in
file->f_op->release::singleton_release():
static int singleton_release(struct inode *inode, struct file *file)
{
struct drm_i915_private *i915 = file->private_data;
cmpxchg(&i915->gem.mmap_singleton, file, NULL);
drm_dev_put(&i915->drm);
return 0;
}
The cmpxchg() is ordered against a concurrent update of
i915->gem.mmap_singleton from mmap_singleton(). IOW, when
mmap_singleton() fails to get a reference on i915->gem.mmap_singleton:
While mmap_singleton() does
rcu_read_lock();
file = get_file_rcu(&i915->gem.mmap_singleton);
rcu_read_unlock();
it allocates a new file via anon_inode_getfile() and does
smp_store_mb(i915->gem.mmap_singleton, file);
So, then what happens in the case of this bug is that at some point
fput() is called and drops the file->f_count to zero leaving the pointer
in i915->gem.mmap_singleton in tact.
Now, there might be delays until
file->f_op->release::singleton_release() is called and
i915->gem.mmap_singleton is set to NULL.
Say concurrently another task hits mmap_singleton() and does:
rcu_read_lock();
file = get_file_rcu(&i915->gem.mmap_singleton);
rcu_read_unlock();
When get_file_rcu() fails to get a reference via atomic_inc_not_zero()
it will try the reload from i915->gem.mmap_singleton expecting it to be
NULL, assuming it has comparable semantics as we expect in
__fget_files_rcu().
But it hasn't so it reloads the same pointer again, trying the same
atomic_inc_not_zero() again and doing so until
file->f_op->release::singleton_release() of the old file has been
called.
So, in contrast to __fget_files_rcu() here we want to not retry when
atomic_inc_not_zero() has failed. We only want to retry in case we
managed to get a reference but the pointer did change on reload.
<3> [511.395679] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
<3> [511.395716] rcu: Tasks blocked on level-1 rcu_node (CPUs 0-9): P6238
<3> [511.395934] rcu: (detected by 16, t=65002 jiffies, g=123977, q=439 ncpus=20)
<6> [511.395944] task:i915_selftest state:R running task stack:10568 pid:6238 tgid:6238 ppid:1001 flags:0x00004002
<6> [511.395962] Call Trace:
<6> [511.395966] <TASK>
<6> [511.395974] ? __schedule+0x3a8/0xd70
<6> [511.395995] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
<6> [511.396003] ? lockdep_hardirqs_on+0xc3/0x140
<6> [511.396013] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
<6> [511.396029] ? get_file_rcu+0x10/0x30
<6> [511.396039] ? get_file_rcu+0x10/0x30
<6> [511.396046] ? i915_gem_object_mmap+0xbc/0x450 [i915]
<6> [511.396509] ? i915_gem_mmap+0x272/0x480 [i915]
<6> [511.396903] ? mmap_region+0x253/0xb60
<6> [511.396925] ? do_mmap+0x334/0x5c0
<6> [511.396939] ? vm_mmap_pgoff+0x9f/0x1c0
<6> [511.396949] ? rcu_is_watching+0x11/0x50
<6> [511.396962] ? igt_mmap_offset+0xfc/0x110 [i915]
<6> [511.397376] ? __igt_mmap+0xb3/0x570 [i915]
<6> [511.397762] ? igt_mmap+0x11e/0x150 [i915]
<6> [511.398139] ? __trace_bprintk+0x76/0x90
<6> [511.398156] ? __i915_subtests+0xbf/0x240 [i915]
<6> [511.398586] ? __pfx___i915_live_setup+0x10/0x10 [i915]
<6> [511.399001] ? __pfx___i915_live_teardown+0x10/0x10 [i915]
<6> [511.399433] ? __run_selftests+0xbc/0x1a0 [i915]
<6> [511.399875] ? i915_live_selftests+0x4b/0x90 [i915]
<6> [511.400308] ? i915_pci_probe+0x106/0x200 [i915]
<6> [511.400692] ? pci_device_probe+0x95/0x120
<6> [511.400704] ? really_probe+0x164/0x3c0
<6> [511.400715] ? __pfx___driver_attach+0x10/0x10
<6> [511.400722] ? __driver_probe_device+0x73/0x160
<6> [511.400731] ? driver_probe_device+0x19/0xa0
<6> [511.400741] ? __driver_attach+0xb6/0x180
<6> [511.400749] ? __pfx___driver_attach+0x10/0x10
<6> [511.400756] ? bus_for_each_dev+0x77/0xd0
<6> [511.400770] ? bus_add_driver+0x114/0x210
<6> [511.400781] ? driver_register+0x5b/0x110
<6> [511.400791] ? i915_init+0x23/0xc0 [i915]
<6> [511.401153] ? __pfx_i915_init+0x10/0x10 [i915]
<6> [511.401503] ? do_one_initcall+0x57/0x270
<6> [511.401515] ? rcu_is_watching+0x11/0x50
<6> [511.401521] ? kmalloc_trace+0xa3/0xb0
<6> [511.401532] ? do_init_module+0x5f/0x210
<6> [511.401544] ? load_module+0x1d00/0x1f60
<6> [511.401581] ? init_module_from_file+0x86/0xd0
<6> [511.401590] ? init_module_from_file+0x86/0xd0
<6> [511.401613] ? idempotent_init_module+0x17c/0x230
<6> [511.401639] ? __x64_sys_finit_module+0x56/0xb0
<6> [511.401650] ? do_syscall_64+0x3c/0x90
<6> [511.401659] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
<6> [511.401684] </TASK>
Link: [1]: https://lore.kernel.org/intel-gfx/SJ1PR11MB6129CB39EED831784C331BAFB9DEA@SJ1PR11MB6129.namprd11.prod.outlook.com
Link: [2]: https://intel-gfx-ci.01.org/tree/linux-next/next-20231013/bat-dg2-11/igt@i915_selftest@[email protected]#dmesg-warnings10963
Cc: Jann Horn <[email protected]>,
Cc: Linus Torvalds <[email protected]>
Link: https://lore.kernel.org/r/20231025-formfrage-watscheln-84526cd3bd7d@brauner
Signed-off-by: Christian Brauner <[email protected]>
|
|
This is the folio equivalent of unmap_and_put_page(), which remains as
a wrapper for it.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
|
|
Allow HID drivers to pass ->suspend, ->resume and ->reset_resume via
pm_ptr().
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
The only overhead in the final kernel image and at runtime are a few
extra bytes in 'struct hid_driver'.
The same approach is chosen by 'struct usb_driver' and other subsystems.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
The superhyway bus driver was only referenced on SH4-202, which is now gone,
so remove it all as well.
I could find no trace of anything ever calling superhyway_register_driver(),
not in the git history but also not on the web, so I assume this has never
served any purpose on mainline kernels.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: John Paul Adrian Glaubitz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: John Paul Adrian Glaubitz <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP (operating performance points) updates for 6.7 from Viresh
Kumar:
"- Extend support for the opp-level beyond required-opps (Ulf Hansson).
- Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru).
- dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait
SoCs and document named opp-microvolt property (Bjorn Andersson,
Dmitry Baryshkov and Christian Marangi).
- Fix -Wunsequenced warning (Nathan Chancellor).
- General cleanup (Viresh Kumar)."
* tag 'opp-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
OPP: No need to defer probe from _opp_attach_genpd()
OPP: Remove genpd_virt_dev_lock
OPP: Reorder code in _opp_set_required_opps_genpd()
OPP: Add _link_required_opps() to avoid code duplication
OPP: Fix formatting of if/else block
dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
OPP: Fix -Wunsequenced in _of_add_opp_table_v1()
dt-bindings: opp: opp-v2-kryo-cpu: Allow opp-peak-kBps
OPP: debugfs: Fix warning with W=1 builds
OPP: Remove doc style comments for internal routines
OPP: Add dev_pm_opp_find_level_floor()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct crash_mem.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Eric Biederman <[email protected]>
Cc: [email protected]
Acked-by: Baoquan He <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Three more fixes:
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
* tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <[email protected]>
Acked-by: Stephen Hemminger <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
|
|
Introduce acpi_dev_uid_match() helper that matches the device with
supplied _UID string.
Signed-off-by: Raag Jadav <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Suzuki noticed that KVM's PMU emulation is oblivious to the NSU and NSK
event filter bits. On systems that have EL3 these bits modify the
filter behavior in non-secure EL0 and EL1, respectively. Even though the
kernel doesn't use these bits, it is entirely possible some other guest
OS does. Additionally, it would appear that these and the M bit are
required by the architecture if EL3 is implemented.
Allow the EL3 event filter bits to be set if EL3 is advertised in the
guest's ID register. Implement the behavior of NSU and NSK according to
the pseudocode, and entirely ignore the M bit for perf event creation.
Reported-by: Suzuki K Poulose <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The logic of whether filesystem can encode/decode file handles is open
coded in many places.
In preparation to changing the logic, move the open coded logic into
inline helpers.
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Amir Goldstein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Add to iommu domain operations a set of callbacks to perform dirty
tracking, particulary to start and stop tracking and to read and clear the
dirty data.
Drivers are generally expected to dynamically change its translation
structures to toggle the tracking and flush some form of control state
structure that stands in the IOVA translation path. Though it's not
mandatory, as drivers can also enable dirty tracking at boot, and just
clear the dirty bits before setting dirty tracking. For each of the newly
added IOMMU core APIs:
iommu_cap::IOMMU_CAP_DIRTY_TRACKING: new device iommu_capable value when
probing for capabilities of the device.
.set_dirty_tracking(): an iommu driver is expected to change its
translation structures and enable dirty tracking for the devices in the
iommu_domain. For drivers making dirty tracking always-enabled, it should
just return 0.
.read_and_clear_dirty(): an iommu driver is expected to walk the pagetables
for the iova range passed in and use iommu_dirty_bitmap_record() to record
dirty info per IOVA. When detecting that a given IOVA is dirty it should
also clear its dirty state from the PTE, *unless* the flag
IOMMU_DIRTY_NO_CLEAR is passed in -- flushing is steered from the caller of
the domain_op via iotlb_gather. The iommu core APIs use the same data
structure in use for dirty tracking for VFIO device dirty (struct
iova_bitmap) abstracted by iommu_dirty_bitmap_record() helper function.
domain::dirty_ops: IOMMU domains will store the dirty ops depending on
whether the iommu device supports dirty tracking or not. iommu drivers can
then use this field to figure if the dirty tracking is supported+enforced
on attach. The enforcement is enable via domain_alloc_user() which is done
via IOMMUFD hwpt flag introduced later.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|