| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
REGULATOR_LINEAR_RANGE() repeats what LINEAR_RANGE() provides.
Deduplicate the former by using the latter. No functional change
intended.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Make the code using filter function a bit nicer by consolidating the
filter function arguments using typedef.
Suggested-by: Andy Shevchenko <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
User will provide a nonce via the INFO ioctl, and will retrieve
the signed device info generated using given nonce.
Signed-off-by: Moti Haimovski <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Added alignment check for event ring read pointer to avoid the potential
buffer corruption issue.
- Added support for SDX75 modem which takes longer time to enter READY state.
- Added spinlock to protect concurrent access while queuing transfer ring
elements.
- Dropped the read channel lock before invoking the client callback as the
client can potentially queue buffers thus ending up wtih soft lockup.
MHI Endpoint
============
- Used kzalloc() to allocate event ring elements instead of allocating the
elements on the stack, as the endpoint controller trying to queue them may not
be able to use vmalloc memory (using DMA).
- Used slab allocator for allocting the memory for objects used frequently and
are of fixed size.
- Added support for interrupt moderation timer feature which is used by the host
to limit the number of interrupts raised by the device for an event ring.
- Added async read/write DMA support for transferring data between host and the
endpoint. So far MHI EP stack assumed that the data will be transferred
synchronously (i.e., it sends completion once the transfer APIs are returned).
But this impacts the throughput if the controller is using DMA to do the
transfer.
So to add async suport, existing sync transfer APIs are renamed to
{read/write}_sync and also introduced two new APIs {read/write}_async for
carrying out the async transfer.
Controllers implementing the async APIs should queue the buffers and return
immediately without waiting for transfer completion. Once the transfer
completion happens later, they should invoke the completion callback so that
the MHI EP stack can send the completion event to the host.
The controller driver patches (PCI EPF) for this async support are also merged
to the MHI tree with Acks from PCI maintainers.
- Fixed the DMA channel direction in error path of the PCI EPF driver.
* tag 'mhi-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: Drop chan lock before queuing buffers
bus: mhi: host: Add spinlock to protect WP access when queueing TREs
PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()
bus: mhi: ep: Add checks for read/write callbacks while registering controllers
bus: mhi: ep: Add support for async DMA read operation
bus: mhi: ep: Add support for async DMA write operation
PCI: epf-mhi: Enable MHI async read/write support
PCI: epf-mhi: Add support for DMA async read/write operation
PCI: epf-mhi: Simulate async read/write using iATU
bus: mhi: ep: Introduce async read/write callbacks
bus: mhi: ep: Rename read_from_host() and write_to_host() APIs
bus: mhi: ep: Pass mhi_ep_buf_info struct to read/write APIs
bus: mhi: ep: Add support for interrupt moderation timer
bus: mhi: ep: Use slab allocator where applicable
bus: mhi: host: Add alignment check for event ring read pointer
bus: mhi: host: pci_generic: Add SDX75 based modem support
bus: mhi: host: Add a separate timeout parameter for waiting ready
bus: mhi: ep: Do not allocate event ring element on stack
|
|
This reverts commit 5f05285df691b1e82108eead7165feae238c95ef.
This commit assumes that every HID descriptor for ALS sensor has
presence of usage id ID HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE.
When the above usage id is absent, driver probe fails. This breaks
ALS sensor functionality on many platforms.
Till we have a good solution, revert this commit.
Reported-by: Thomas Weißschuh <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218223
Signed-off-by: Srinivas Pandruvada <[email protected]>
Cc: <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit ee3710f39f9d0ae5137a866138d005fe1ad18132.
This commit assumes that every HID descriptor for ALS sensor has
presence of usage id ID HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X and
HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y. When the above usage ids are
absent, driver probe fails. This breaks ALS sensor functionality on
many platforms.
Till we have a good solution, revert this commit.
Reported-by: Thomas Weißschuh <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218223
Signed-off-by: Srinivas Pandruvada <[email protected]>
Cc: <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that trace_marker can hold more than 1KB string, and can write as much
as the ring buffer can hold, the trace_seq is not big enough to hold
writes:
~# a="1234567890"
~# cnt=4080
~# s=""
~# while [ $cnt -gt 10 ]; do
~# s="${s}${a}"
~# cnt=$((cnt-10))
~# done
~# echo $s > trace_marker
~# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 2/2 #P:8
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
<...>-860 [002] ..... 105.543465: tracing_mark_write[LINE TOO BIG]
<...>-860 [002] ..... 105.543496: tracing_mark_write: 789012345678901234567890
By increasing the trace_seq buffer to almost two pages, it can now print
out the first line.
This also subtracts the rest of the trace_seq fields from the buffer, so
that the entire trace_seq is now PAGE_SIZE aligned.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Allow a trace write to be as big as the ring buffer tracing data will
allow. Currently, it only allows writes of 1KB in size, but there's no
reason that it cannot allow what the ring buffer can hold.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
A trace instance may only need to enable specific events. As the eventfs
directory of an instance currently creates all events which adds overhead,
allow internal instances to be created with just the events in systems
that they care about. This currently only deals with systems and not
individual events, but this should bring down the overhead of creating
instances for specific use cases quite bit.
The trace_array_get_by_name() now has another parameter "systems". This
parameter is a const string pointer of a comma/space separated list of
event systems that should be created by the trace_array. (Note if the
trace_array already exists, this parameter is ignored).
The list of systems is saved and if a module is loaded, its events will
not be added unless the system for those events also match the systems
string.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Arun Easi <[email protected]>
Cc: Daniel Wagner <[email protected]>
Tested-by: Dmytro Maluka <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.
Major changes:
cfg80211/mac80211
* AMD ACPI based Wifi band RFI (WBRF) mitigation feature
* Basic Service Set (BSS) usage reporting
* TID to link mapping support
* mac80211 hardware flag to disallow puncturing
iwlwifi
* new debugfs file fw_dbg_clear
mt76
* NVMEM EEPROM improvements
* mt7996 Extremely High Throughpu (EHT) improvements
* mt7996 Wireless Ethernet Dispatcher (WED) support
* mt7996 36-bit DMA support
ath12k
* support one MSI vector
* WCN7850: support AP mode
* tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings
wifi: ath11k: workaround too long expansion sparse warnings
Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ"
wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor()
wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up
wifi: rtw89: add DBCC H2C to notify firmware the status
wifi: rtw89: mac: add suffix _ax to MAC functions
wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled
wifi: rtw89: 8922a: add power on/off functions
wifi: rtw89: add XTAL SI for WiFi 7 chips
wifi: rtw89: phy: print out RFK log with formatted string
wifi: rtw89: parse and print out RFK log from C2H events
wifi: rtw89: add C2H event handlers of RFK log and report
wifi: rtw89: load RFK log format string from firmware file
wifi: rtw89: fw: add version field to BB MCU firmware element
wifi: rtw89: fw: load TX power track tables from fw_element
wifi: mwifiex: configure BSSID consistently when starting AP
wifi: mwifiex: add extra delay for firmware ready
wifi: mac80211: sta_info.c: fix sentence grammar
wifi: mac80211: rx.c: fix sentence grammar
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The pci_epf_ops struct contains a set of callbacks that are used by the
pci_epf_driver, and is never modified by the EPF core itself.
Marking the struct pointer const allows EPF drivers to declare their
pci_epf_ops struct to be const.
This allows the struct to be placed in the read-only section. Which
for example brings some security benefits as the callbacks can not be
overwritten.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
|
|
Add KUNIT_INIT_TABLE to the INIT_DATA linker section.
Alter the KUnit macros to create init tests:
kunit_test_init_section_suites
Update lib/kunit/executor.c to run both the suites in KUNIT_TABLE and
KUNIT_INIT_TABLE.
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Rae Moar <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
This series is introducing the use of FIELD_GET and FIELD_PREP which
requires bitfield.h to be included. Fix all the includes in this one
change, and rearrange includes into alphabetical order to ease
readability and future maintenance.
virtchnl.h and it's usage was modified to have it's own includes as it
should. This required including bits.h for virtchnl.h.
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Jesse Brandeburg <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into gpio/for-next
Tag for the device_is_big_endian() addition to property.h
For others to be able to pull from in a stable way.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
linux/pci.h defines the IRQ flags PCI_IRQ_INTX, PCI_IRQ_MSI and
PCI_IRQ_MSIX. Let's use these flags directly instead of the endpoint
definitions provided by enum pci_epc_irq_type. This removes the need
for defining this enum type completely.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Manivannan Sadhasivam <[email protected]>
|
|
Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit about the type
of IRQ being referenced as well as to match the PCI specifications
terms. Redefine PCI_IRQ_LEGACY as an alias to PCI_IRQ_INTX to avoid the
need for doing the renaming tree-wide. New drivers and new code should
now prefer using PCI_IRQ_INTX instead of PCI_IRQ_LEGACY.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Manivannan Sadhasivam <[email protected]>
|
|
Remove second `#include <linux/err.h>`. Remove `#include <asm/errno.h>`
too as it's included by `err.h`.
Signed-off-by: Wang Jinchao <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Introduce a new PLL reset mode flag which controls whether or not to
reset a PLL after adjusting its rate. The mode can be configured through
platform data or device tree.
Since commit 6dc669a22c77 ("clk: si5351: Add PLL soft reset"), the
driver unconditionally resets a PLL whenever its rate is adjusted.
The rationale was that a PLL reset was required to get three outputs
working at the same time. Before this change, the driver never reset the
PLLs.
Commit b26ff127c52c ("clk: si5351: Apply PLL soft reset before enabling
the outputs") subsequently introduced an option to reset the PLL when
enabling a clock output that sourced it. Here, the rationale was that
this is required to get a deterministic phase relationship between
multiple output clocks.
This clearly shows that it is useful to reset the PLLs in applications
where multiple clock outputs are used. However, the Si5351 also allows
for glitch-free rate adjustment of its PLLs if one avoids resetting the
PLL. In our audio application where a single Si5351 clock output is used
to supply a runtime adjustable bit clock, this unconditional PLL reset
behaviour introduces unwanted glitches in the clock output.
It would appear that the problem being solved in the former commit
may be solved by using the optional device tree property introduced in
the latter commit, obviating the need for an unconditional PLL reset
after rate adjustment. But it's not OK to break the default behaviour of
the driver, and it cannot be assumed that all device trees are using the
property introduced in the latter commit. Hence, the new behaviour is
made opt-in.
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Rabeeh Khoury <[email protected]>
Cc: Jacob Siverskog <[email protected]>
Cc: Sergej Sawazki <[email protected]>
Signed-off-by: Alvin Šipraga <[email protected]>
Acked-by: Sebastian Hesselbarth <[email protected]>
Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-3-69b82311cb90@bang-olufsen.dk
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock
rcu replacements, alongside the already existing helpers.
This is a quality of life helper so instead of using:
rcu_replace_pointer(rp, p, lockdep_rtnl_is_held())
.. or the open coded..
rtnl_dereference() / rcu_assign_pointer()
.. or the lazy check version ..
rcu_replace_pointer(rp, p, 1)
Use:
rcu_replace_pointer_rtnl(rp, p)
Signed-off-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Victor Nogueira <[email protected]>
Signed-off-by: Pedro Tammela <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().
If UIP timeout is configured by caller to be >=100 ms and a call
takes this long, log a warning.
Make all callers use 10ms to ensure no functional changes.
Cc: <[email protected]> # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Signed-off-by: Mario Limonciello <[email protected]>
Tested-by: Mateusz Jończyk <[email protected]>
Reviewed-by: Mateusz Jończyk <[email protected]>
Acked-by: Mateusz Jończyk <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Some PHY in PHY package may require to read/write MMD regs to correctly
configure the PHY package.
Add support for these additional required function in both lock and no
lock variant.
It's assumed that the entire PHY package is either C22 or C45. We use
C22 or C45 way of writing/reading to mmd regs based on the passed phydev
whether it's C22 or C45.
Signed-off-by: Christian Marangi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Current API for PHY package are limited to single address to configure
global settings for the PHY package.
It was found that some PHY package (for example the qca807x, a PHY
package that is shipped with a bundle of 5 PHY) requires multiple PHY
address to configure global settings. An example scenario is a PHY that
have a dedicated PHY for PSGMII/serdes calibrarion and have a specific
PHY in the package where the global PHY mode is set and affects every
other PHY in the package.
Change the API in the following way:
- Change phy_package_join() to take the base addr of the PHY package
instead of the global PHY addr.
- Make __/phy_package_write/read() require an additional arg that
select what global PHY address to use by passing the offset from the
base addr passed on phy_package_join().
Each user of this API is updated to follow this new implementation
following a pattern where an enum is defined to declare the offset of the
addr.
We also drop the check if shared is defined as any user of the
phy_package_read/write is expected to use phy_package_join first. Misuse
of this will correctly trigger a kernel panic for NULL pointer
exception.
Signed-off-by: Christian Marangi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Switch addr type in phy_package_shared struct to u8.
The value is already checked to be non negative and to be less than
PHY_MAX_ADDR, hence u8 is better suited than using int.
Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
LLVM ignores everything inside the if statement and doesn't generate
errors, but GCC doesn't ignore it, resulting in the following error:
drivers/perf/arm_pmuv3.c: In function ‘armv8pmu_write_evtype’:
include/linux/bits.h:34:29: error: left shift count >= width of type [-Werror=shift-count-overflow]
34 | (((~UL(0)) - (UL(1) << (l)) + 1) & \
Fix it by using GENMASK_ULL which doesn't overflow on arm32 (even though
the value is never used there).
Fixes: 3115ee021bfb ("arm64: perf: Include threshold control fields in PMEVTYPER mask")
Reported-by: Uwe Kleine-König <[email protected]>
Closes: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Signed-off-by: James Clark <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Limit Max_Read_Request_Size (MRRS) on some MIPS Loongson systems
because they don't all support MRRS > 256, and firmware doesn't
always initialize it correctly, which meant some PCIe devices didn't
work (Jiaxun Yang)
- Add and use pci_enable_link_state_locked() to prevent potential
deadlocks in vmd and qcom drivers (Johan Hovold)
- Revert recent (v6.5) acpiphp resource assignment changes that fixed
issues with hot-adding devices on a root bus or with large BARs, but
introduced new issues with GPU initialization and hot-adding SCSI
disks in QEMU VMs and (Bjorn Helgaas)
* tag 'pci-v6.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: acpiphp: Reassign resources on bridge if necessary"
PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert
PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter
PCI: qcom: Clean up ASPM comment
PCI: qcom: Fix potential deadlock when enabling ASPM
PCI: vmd: Fix potential deadlock when enabling ASPM
PCI/ASPM: Add pci_enable_link_state_locked()
PCI: loongson: Limit MRRS to 256
|
|
Pengfei Xu reported [1] Syzkaller/KASAN issue found in bpf_link_show_fdinfo.
The reason is missing BPF_LINK_TYPE invocation for uprobe multi
link and for several other links, adding that.
[1] https://lore.kernel.org/bpf/[email protected]/
Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link")
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Reported-by: Pengfei Xu <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Tested-by: Pengfei Xu <[email protected]>
Acked-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
As per the earlier patches, BPF sub-programs have bpf_callback_t
signature and CFI expects callers to have matching signature. This is
violated by bpf_prog_aux::bpf_exception_cb().
[peterz: Changelog]
Reported-by: Peter Zijlstra <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/CAADnVQ+Z7UcXXBBhMubhcMM=R-dExk-uHtfOLtoLxQ1XxEpqEA@mail.gmail.com
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a CFI_NOSEAL() helper to mark functions that need to retain their
CFI information, despite not otherwise leaking their address.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
BPF struct_ops uses __arch_prepare_bpf_trampoline() to write
trampolines for indirect function calls. These tramplines much have
matching CFI.
In order to obtain the correct CFI hash for the various methods, add a
matching structure that contains stub functions, the compiler will
generate correct CFI which we can pilfer for the trampolines.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The current BPF call convention is __nocfi, except when it calls !JIT things,
then it calls regular C functions.
It so happens that with FineIBT the __nocfi and C calling conventions are
incompatible. Specifically __nocfi will call at func+0, while FineIBT will have
endbr-poison there, which is not a valid indirect target. Causing #CP.
Notably this only triggers on IBT enabled hardware, which is probably why this
hasn't been reported (also, most people will have JIT on anyway).
Implement proper CFI prologues for the BPF JIT codegen and drop __nocfi for
x86.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Normal include order is that linux/foo.h should include asm/foo.h, CFI has it
the wrong way around.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are multiple ways to grab references to credentials, and the only
protection we have against overflowing it is the memory required to do
so.
With memory sizes only moving in one direction, let's bump the reference
count to 64-bit and move it outside the realm of feasibly overflowing.
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull io_uring fixes from Jens Axboe:
"Just two minor fixes:
- Fix for the io_uring socket option commands using the wrong value
on some archs (Al)
- Tweak to the poll lazy wake enable (me)"
* tag 'io_uring-6.7-2023-12-15' of git://git.kernel.dk/linux:
io_uring/cmd: fix breakage in SOCKET_URING_OP_SIOC* implementation
io_uring/poll: don't enable lazy wake for POLLEXCLUSIVE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6
issues"
* tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mglru: reclaim offlined memcgs harder
mm/mglru: respect min_ttl_ms with memcgs
mm/mglru: try to stop at high watermarks
mm/mglru: fix underprotected page cache
mm/shmem: fix race in shmem_undo_range w/THP
Revert "selftests: error out if kernel header files are not yet built"
crash_core: fix the check for whether crashkernel is from high memory
x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC
sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC
loongarch, kexec: change dependency of object files
mm/damon/core: make damon_start() waits until kdamond_fn() starts
selftests/mm: cow: print ksft header before printing anything else
mm: fix VMA heap bounds checking
riscv: fix VMALLOC_START definition
kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP
|
|
There is no user for this interface that's why remove it.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/e52a415a004e28a43e6d08e9e22d9e8fef3737df.1702565618.git.michal.simek@amd.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As per the current code base, PM_CLOCK_SETRATE and PM_CLOCK_GETRATE
APIs are not supported for the runtime operations. In the case of
ZynqMP returning an error from TF-A when there is any request to
access these APIs and for Versal also it is returning an error like
NO_ACCESS from the firmware. So, just removing the unused code to
avoid the confusion around these APIs.
Also, there is no issue with the backward compatibility as these APIs
were never used since implemented. Hence no need to bump up the
version of the feature check API as well.
Signed-off-by: Ronak Jain <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/6ccbffbafd1f0f48f6574d5a3bf2db6a5603fdb0.1702565618.git.michal.simek@amd.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Utilize the managed resource (devres) framework and add the following
devm_* helpers for the SPMI driver:
- devm_spmi_controller_alloc()
- devm_spmi_controller_add()
[[email protected]: Rename to spmi-devres for module niceness, slap on
GPL module license]
Signed-off-by: Fei Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
in order to support NEW chip rts5264, the definitions of some internal
registers are define in new file rts5264.h, and some callback functions
and the workflow for rts5264 are define in new file rts5264.c
also add rts5264.o to Makefile
Signed-off-by: Ricky Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Tag for the device_is_big_endian() addition to property.h
For others to be able to pull from in a stable way.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Some users want to use the struct device pointer to see if the
device is big endian in terms of Open Firmware specifications,
i.e. if it has a "big-endian" property, or if the kernel was
compiled for BE *and* the device has a "native-endian" property.
Provide inline helper for the users.
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It's clearly been a while since someone looked at this, so I gave it a
quick shot. There are few issues in here:
- Random bundling of members that are mostly read-only and often written
- Random holes that need not be there
This moves the most frequently used bits into cacheline 1 and 2, with
the 2nd one being more write intensive than the first one, which is
basically read-only.
Outside of making this work a bit more efficiently, it also reduces the
size of struct request_queue for my test setup from 864 bytes (spanning
14 cachelines!) to 832 bytes and 13 cachelines.
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The driver uses bit shifts and hexadecimal expressions to declare
constants. Replace that with the BIT(), GENMASK() & FIELD_PREP_CONST()
macros to clarify intent.
include/linux/amba/serial.h gets included from arch/arm/include/debug/pl01x.S.
Avoid includes and macro tricks for the four defines that are involved:
UART01x_DR, UART01x_FR, UART01x_FR_TXFF and UART01x_FR_BUSY.
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Théo Lebrun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Current layout support was initially written without modules support in
mind. When the requirement for module support rose, the existing base
was improved to adopt modularization support, but kind of a design flaw
was introduced. With the existing implementation, when a storage device
registers into NVMEM, the core tries to hook a layout (if any) and
populates its cells immediately. This means, if the hardware description
expects a layout to be hooked up, but no driver was provided for that,
the storage medium will fail to probe and try later from
scratch. Even if we consider that the hardware description shall be
correct, we could still probe the storage device (especially if it
contains the rootfs).
One way to overcome this situation is to consider the layouts as
devices, and leverage the native notifier mechanism. When a new NVMEM
device is registered, we can populate its nvmem-layout child, if any,
and wait for the matching to be done in order to get the cells (the
waiting can be easily done with the NVMEM notifiers). If the layout
driver is compiled as a module, it should automatically be loaded. This
way, there is no strong order to enforce, any NVMEM device creation
or NVMEM layout driver insertion will be observed as a new event which
may lead to the creation of additional cells, without disturbing the
probes with costly (and sometimes endless) deferrals.
In order to achieve that goal we create a new bus for the nvmem-layouts
with minimal logic to match nvmem-layout devices with nvmem-layout
drivers. All this infrastructure code is created in the layouts.c file.
Signed-off-by: Miquel Raynal <[email protected]>
Tested-by: Rafał Miłecki <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This hook is meant to be used by any provider and instantiating a layout
just for this is useless. Let's instead move this hook to the nvmem
device and add it to the config structure to be easily shared by the
providers.
While at moving this hook, rename it ->fixup_dt_cell_info() to clarify
its main intended purpose.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The layout entry is not used and will anyway be made useless by the new
layout bus infrastructure coming next, so drop it. While at it, clarify
the kdoc entry.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
nvmem-consumer.h is included by consumer devices, extracting data from
NVMEM devices whereas nvmem-provider.h is included by devices providing
NVMEM content.
The only users of of_nvmem_layout_get_container() outside of the core
are layout drivers, so better move its prototype to nvmem-provider.h.
While we do so, we also move the kdoc associated with the function to
the header rather than the .c file.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This helper is really handy to create unique device names based on their
device tree path, we may need it outside of the OF core (in the NVMEM
subsystem) so let's export it. As this helper has nothing patform
specific, let's move it to of/device.c instead of of/platform.c so we
can add its prototype to of_device.h.
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
At present there are ~200 usages of device_lock() in the kernel. Some of
those usages lead to "goto unlock;" patterns which have proven to be
error prone. Define a "device" guard() definition to allow for those to
be cleaned up and prevent new ones from appearing.
Link: http://lore.kernel.org/r/657897453dda8_269bd29492@dwillia2-mobl3.amr.corp.intel.com.notmuch
Link: http://lore.kernel.org/r/[email protected]
Cc: Vishal Verma <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Vishal Verma <[email protected]>
Link: https://lore.kernel.org/r/170250854466.1522182.17555361077409628655.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|