| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Amritha Nambiar <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Move RPS related structures and helpers from include/linux/netdevice.h
and include/net/sock.h to a new include file.
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
skbuff_cache, skbuff_fclone_cache and skb_small_head_cache
are used in rx/tx fast paths.
Move them to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
dev_rx_weight is read from process_backlog().
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
dev_tx_weight is used in tx fast path.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
netdev_max_backlog is used in rx fat path.
Move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ptype_all is used in rx/tx fast paths.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Instead of spreading networking critical fields
all over the places, add a custom net_hotdata
structure so that we can precisely control its layout.
In this first patch, move :
- gro_normal_batch used in rx (GRO stack)
- offload_base used in rx and tx (GRO and TSO stacks)
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
scripts/gdb/symbols: fix invalid escape sequence warning
mailmap: fix Kishon's email
init/Kconfig: lower GCC version check for -Warray-bounds
mm, mmap: fix vma_merge() case 7 with vma_ops->close
mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
|
|
Subsequent patches introduce bpf_arena that imposes special alignment
requirements on address selection.
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
A fwnode link between specific supplier-consumer fwnodes can be added
multiple times for multiple reasons. If that dependency doesn't exist,
deleting the fwnode link once doesn't guarantee that it won't get created
again.
So, add FWLINK_FLAG_IGNORE flag to mark a fwnode link as one that needs to
be completely ignored. Since a fwnode link's flags is an OR of all the
flags passed to all the fwnode_link_add() calls to create that specific
fwnode link, the FWLINK_FLAG_IGNORE flag is preserved and can be used to
mark a fwnode link as on that need to be completely ignored until it is
deleted.
Signed-off-by: Saravana Kannan <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Allow the callers to set fwnode link flags when adding fwnode links.
Signed-off-by: Saravana Kannan <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Reviewed-by: Sakari Ailus <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The struct fwnode_operations defines one of the callback to return
enum dev_dma_attr. But this currently is defined in property.h.
Move it to the correct location.
Reviewed-by: Sakari Ailus <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A few APIs, i.e. fwnode_is_ancestor_of(), fwnode_get_next_parent_dev(),
and get_dev_from_fwnode(), that belong specifically to the fw_devlink APIs,
may be static, but they are not.
Resolve this mess by moving them to the driver/base/core where the all
users are being resided and make static.
No functional changes intended.
Reviewed-by: Sakari Ailus <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We do not use 'extern' keyword with functions. Remove the last one
mistakenly added to fwnode.h.
Reviewed-by: Sakari Ailus <[email protected]>
Acked-by: Saravana Kannan <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Define cleanup handler using facilities from linux/cleanup.h to simplify
error handling in code using firmware loader. This will allow writing code
like this:
int driver_update_firmware(...)
{
const struct firmware *fw_entry __free(firmware) = NULL;
int error;
...
error = request_firmware(&fw_entry, fw_name, dev);
if (error) {
dev_err(dev, "failed to request firmware %s: %d",
fw_name, error);
return error;
}
error = check_firmware_valid(fw_entry);
if (error)
return error;
guard(mutex)(&instance->lock);
error = use_firmware(instance, fw);
if (error)
return error;
return 0;
}
Signed-off-by: Dmitry Torokhov <[email protected]>
Acked-by: Luis Chamberalin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a UIO memtype specifically for sharing dma_alloc_coherent
memory with userspace, backed by dma_mmap_coherent.
This is mainly for the bnx2/bnx2x/bnx2i "cnic" interface, although there
are a few other uio drivers which map dma_alloc_coherent memory and will
be converted to use dma_mmap_coherent as well.
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Chris Leech <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add CDX-MSI domain per CDX controller with gic-its domain as
a parent, to support MSI for CDX devices. CDX devices allocate
MSIs from the CDX domain. Also, introduce APIs to alloc and free
IRQs for CDX domain.
In CDX subsystem firmware is a controller for all devices and
their configuration. CDX bus controller sends all the write_msi_msg
commands to firmware running on RPU and the firmware interfaces with
actual devices to pass this information to devices
Since, CDX controller is the only way to communicate with the Firmware
for MSI write info, CDX domain per controller required in contrast to
having a CDX domain per device.
Co-developed-by: Nikhil Agarwal <[email protected]>
Signed-off-by: Nikhil Agarwal <[email protected]>
Co-developed-by: Abhijit Gangurde <[email protected]>
Signed-off-by: Abhijit Gangurde <[email protected]>
Signed-off-by: Nipun Gupta <[email protected]>
Reviewed-by: Pieter Jansen van Vuuren <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Tested-by: Nikhil Agarwal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The functions below are only used within the context of
drivers/greybus/core.c, so move them all into core and drop their 'inline'
specifiers:
is_gb_host_device(), is_gb_module(), is_gb_interface(), is_gb_control(),
is_gb_bundle() and is_gb_svc().
Suggested-by: Alex Elder <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: "Ricardo B. Marliere" <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch introduces a new API, tegra_xusb_padctl_get_port_number,
to the Tegra XUSB Pad Controller driver. This API is used to identify
the USB port that is associated with a given PHY.
The function takes a PHY pointer for either a USB2 PHY or USB3 PHY as input
and returns the corresponding port number. If the PHY pointer is invalid,
it returns -ENODEV.
Cc: [email protected]
Signed-off-by: Wayne Chang <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Tested-by: Jon Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the dio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: "Ricardo B. Marliere" <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add zynqmp_pm_efuse_access API in the ZynqMP
firmware for read/write access of efuse memory.
Signed-off-by: Praveen Teja Kundanala <[email protected]>
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the slimbus_bus variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: "Ricardo B. Marliere" <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
|
|
for-6.9/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.9
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)"
* tag 'nvme-6.9-2024-03-07' of git://git.infradead.org/nvme: (31 commits)
nvme: clear caller pointer on identify failure
nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse()
nvme: fcloop: make fcloop_class constant
nvme: fabrics: make nvmf_class constant
nvme: core: constify struct class usage
nvme-fabrics: typo in nvmf_parse_key()
nvme-multipath: use atomic queue limits API for stacking limits
nvme-multipath: pass queue_limits to blk_alloc_disk
nvme: use the atomic queue limits update API
nvme: cleanup nvme_configure_metadata
nvme: don't query identify data in configure_metadata
nvme: split out a nvme_identify_ns_nvm helper
nvme: move common logic into nvme_update_ns_info
nvme: move setting the write cache flags out of nvme_set_queue_limits
nvme: move a few things out of nvme_update_disk_info
nvme: don't use nvme_update_disk_info for the multipath disk
nvme: move blk_integrity_unregister into nvme_init_integrity
nvme: cleanup the nvme_init_integrity calling conventions
nvme: move max_integrity_segments handling out of nvme_init_integrity
nvme: remove nvme_revalidate_zones
...
|
|
First of all, last_cs_index_mask should be aligned with the original
cs_index_mask, which is 16-bit (for now) wide. Use the same pattern
for the last_cs_index_mask.
Second, last_cs can be negative and since 'char' is equal to 'unsigned
char' in the kernel, it's incorrect, strictly speaking, to assign
signed number to it. Use s8 type as it's done for *_native_cs ones.
With this change, regroup a bit the ordering to avoid too much memory
space to be wasted due to paddings. Shuffle kernel documentation
accordignly.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
commit 4d72c3bb60dd ("net: phylink: strip out pre-March 2020 legacy code")
dropped the mac_pcs_get_state ops in phylink_mac_ops in favor of
dedicated PCS operation pcs_get_state. However, the documentation for
the pcs_get_state ops was incorrectly converted and now self-references.
Drop the extra comment.
Signed-off-by: Maxime Chevallier <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The kerneldoc for struct cs_dsp refers to a fw_file_name member but
there's no such member.
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krisman/unicode into vfs.misc
Merge case-insensitive updates from Gabriel Krisman Bertazi:
- Patch case-insensitive lookup by trying the case-exact comparison
first, before falling back to costly utf8 casefolded comparison.
- Fix to forbid using a case-insensitive directory as part of an
overlayfs mount.
- Patchset to ensure d_op are set at d_alloc time for fscrypt and
casefold volumes, ensuring filesystem dentries will all have the
correct ops, whether they come from a lookup or not.
* tag 'for-next-6.9' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
Signed-off-by: Christian Brauner <[email protected]>
|
|
gpio_led_register_device() is built whenever CONFIG_LEDS_GPIO_REGISTER is
enabled, and this may be used even when CONFIG_NEW_LEDS is turned off.
However, the stub declaration in the header is provided for all configs
without CONFIG_NEW_LEDS, resulting in a build failure:
drivers/leds/leds-gpio-register.c:24:1: error: redefinition of 'gpio_led_register_device'
24 | gpio_led_register_device(int id, const struct gpio_led_platform_data *pdata)
| ^
include/linux/leds.h:646:39: note: previous definition is here
Change the #ifdef check to match the definition.
Note: this apparently took years of randconfig builds to hit, since
a number of other drivers just 'select NEW_LEDS' anyway.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Along the same lines as making devm_led_classdev_register() declared
extern unconditional, do the same thing for the two sub-classes
that have similar stubs.
The users of these interfaces go to great lengths to allow building
with both the generic leds API and the extended version, but realistically
there is not much use in this, so just simplify it to always rely
on it and remove the confusing fallback logic.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
devm_led_classdev_register_ext() stubs
These two functions have stub implementations that are called when
NEW_LEDS and/or LEDS_CLASS are disabled, theorerically allowing drivers
to optionally use the LED subsystem.
However, this has never really worked because a built-in driver is
unable to link against these functions if the LED class is in a loadable
module. Heiner ran into this problem with a driver that newly gained
a LEDS_CLASS dependency and suggested using an IS_REACHABLE() check.
This is the reverse approach, removing the stub entirely to acknowledge
that it is pointless in its current form, and that not having it avoids
misleading developers into thinking that they can rely on it.
This survived around 1000 randconfig builds to validate that any callers
of the interface already have the correct Kconfig dependency already,
with the exception of the one that Heiner just added.
Cc: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/linux-leds/[email protected]/T/#u
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
ibs-for-leds-merged
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Duje Mihanović <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
The ExpressWire protocol is shared between at least KTD2692 and KTD2801
with slight differences such as timings and the former not having a
defined set of pulses for enabling the protocol (possibly because it
does not support PWM unlike KTD2801). Despite these differences the
ExpressWire handling code can be shared between the two, so in
preparation for adding KTD2801 support introduce a library implementing
this protocol.
Suggested-by: Daniel Thompson <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Duje Mihanović <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Have an actual mlx5_sd instance in the core device, and fix the getter
accordingly. This allows SD stuff to flow, the feature becomes supported
only here.
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add a cap bit in mcam_access_reg to check for MPIR support.
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
I2C_M_RD is defined as and guaranteed to be 1 and 'flag & I2C_M_RD' is
one or zero. No need for an additional condition to obtain the value.
Signed-off-by: Hsin-Yu.Chen <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
[wsa: slightly updated commit message]
Signed-off-by: Wolfram Sang <[email protected]>
|
|
* kvm-arm64/vfio-normal-nc:
: Normal-NC support for vfio-pci @ stage-2, courtesy of Ankit Agrawal
:
: KVM's policy to date has been that any and all MMIO mapping at stage-2
: is treated as Device-nGnRE. This is primarily done due to concerns of
: the guest triggering uncontainable failures in the system if they manage
: to tickle the device / memory system the wrong way, though this is
: unnecessarily restrictive for devices that can be reasoned as 'safe'.
:
: Unsurprisingly, the Device-* mapping can really hurt the performance of
: assigned devices that can handle Gathering, and can be an outright
: correctness issue if the guest driver does unaligned accesses.
:
: Rather than opening the floodgates to the full ecosystem of devices that
: can be exposed to VMs, take the conservative approach and allow PCI
: devices to be mapped as Normal-NC since it has been determined to be
: 'safe'.
vfio: Convey kvm that the vfio-pci device is wc safe
KVM: arm64: Set io memory s2 pte as normalnc for vfio pci device
mm: Introduce new flag to indicate wc safe
KVM: arm64: Introduce new flag for non-cacheable IO memory
Signed-off-by: Oliver Upton <[email protected]>
|
|
Introduce may_goto instruction that from the verifier pov is similar to
open coded iterators bpf_for()/bpf_repeat() and bpf_loop() helper, but it
doesn't iterate any objects.
In assembly 'may_goto' is a nop most of the time until bpf runtime has to
terminate the program for whatever reason. In the current implementation
may_goto has a hidden counter, but other mechanisms can be used.
For programs written in C the later patch introduces 'cond_break' macro
that combines 'may_goto' with 'break' statement and has similar semantics:
cond_break is a nop until bpf runtime has to break out of this loop.
It can be used in any normal "for" or "while" loop, like
for (i = zero; i < cnt; cond_break, i++) {
The verifier recognizes that may_goto is used in the program, reserves
additional 8 bytes of stack, initializes them in subprog prologue, and
replaces may_goto instruction with:
aux_reg = *(u64 *)(fp - 40)
if aux_reg == 0 goto pc+off
aux_reg -= 1
*(u64 *)(fp - 40) = aux_reg
may_goto instruction can be used by LLVM to implement __builtin_memcpy,
__builtin_strcmp.
may_goto is not a full substitute for bpf_for() macro.
bpf_for() doesn't have induction variable that verifiers sees,
so 'i' in bpf_for(i, 0, 100) is seen as imprecise and bounded.
But when the code is written as:
for (i = 0; i < 100; cond_break, i++)
the verifier see 'i' as precise constant zero,
hence cond_break (aka may_goto) doesn't help to converge the loop.
A static or global variable can be used as a workaround:
static int zero = 0;
for (i = zero; i < 100; cond_break, i++) // works!
may_goto works well with arena pointers that don't need to be bounds
checked on access. Load/store from arena returns imprecise unbounded
scalar and loops with may_goto pass the verifier.
Reserve new opcode BPF_JMP | BPF_JCOND for may_goto insn.
JCOND stands for conditional pseudo jump.
Since goto_or_nop insn was proposed, it may use the same opcode.
may_goto vs goto_or_nop can be distinguished by src_reg:
code = BPF_JMP | BPF_JCOND
src_reg = 0 - may_goto
src_reg = 1 - goto_or_nop
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: John Fastabend <[email protected]>
Tested-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
vmap/vmalloc APIs are used to map a set of pages into contiguous kernel
virtual space.
get_vm_area() with appropriate flag is used to request an area of kernel
address range. It's used for vmalloc, vmap, ioremap, xen use cases.
- vmalloc use case dominates the usage. Such vm areas have VM_ALLOC flag.
- the areas created by vmap() function should be tagged with VM_MAP.
- ioremap areas are tagged with VM_IOREMAP.
BPF would like to extend the vmap API to implement a lazily-populated
sparse, yet contiguous kernel virtual space. Introduce VM_SPARSE flag
and vm_area_map_pages(area, start_addr, count, pages) API to map a set
of pages within a given area.
It has the same sanity checks as vmap() does.
It also checks that get_vm_area() was created with VM_SPARSE flag
which identifies such areas in /proc/vmallocinfo
and returns zero pages on read through /proc/kcore.
The next commits will introduce bpf_arena which is a sparsely populated
shared memory region between bpf program and user space process. It will
map privately-managed pages into a sparse vm area with the following steps:
// request virtual memory region during bpf prog verification
area = get_vm_area(area_size, VM_SPARSE);
// on demand
vm_area_map_pages(area, kaddr, kend, pages);
vm_area_unmap_pages(area, kaddr, kend);
// after bpf program is detached and unloaded
free_vm_area(area);
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Pasha Tatashin <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Even if pXd_leaf() API is defined globally, it's not clear on the retval,
and there are three types used (bool, int, unsigned log).
Always return a boolean for pXd_leaf() APIs.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Peter Xu <[email protected]>
Suggested-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Mike Rapoport (IBM) <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: "Aneesh Kumar K.V" <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
In s390, the page->index field is used for gmap (see gmap_shadow_pgt()),
so add the corresponding pt_index to struct ptdesc and add a comment to
clarify this.
Link: https://lkml.kernel.org/r/283624c2af45fb2090b41a6b1b5481bb0a45bad7.1709541697.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Janosch Frank <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "minor fixes and supplement for ptdesc".
In this series, the [PATCH 1/3] and [PATCH 2/3] are fixes for some issues
discovered during code inspection.
The [PATCH 3/3] is a supplement to ptdesc conversion in s390, I don't know
why this is not done in the commit 6326c26c1514 ("s390: convert various
pgalloc functions to use ptdescs"), maybe I missed something. And since I
don't have an s390 environment, I hope kernel test robot can help compile
and test, and this is why I did not fold [PATCH 2/3] and [PATCH 3/3] into
one patch.
This patch (of 3):
The commit 32cc0b7c9d50 ("powerpc: add pte_free_defer() for pgtables
sharing page") introduced the use of PageActive flag to page table
fragments tracking, so the ptdesc->__page_flags is not unused, so correct
the wrong comment.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/cc42d5915fd98fd802f920de243f535efcfe01db.1709541697.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: Janosch Frank <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Now that PF_POISONED_CHECK() can take a const argument, we can drop
the cast.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Constify the flag tests that aren't automatically generated and the tests
that look like flag tests but are more complicated.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Now that dump_page() takes a const argument, we can constify all the page
flag tests.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Now that __dump_page() takes a const argument, we can make dump_page()
take a const struct page too.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|