| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that we are using the ops structure directly from the driver,
there are no users left of this ops pointer.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
In the SoundWire probe, we store a pointer from the driver ops into
the 'slave' structure. This can lead to kernel oopses when unbinding
codec drivers, e.g. with the following sequence to remove machine
driver and codec driver.
/sbin/modprobe -r snd_soc_sof_sdw
/sbin/modprobe -r snd_soc_rt711
The full details can be found in the BugLink below, for reference the
two following examples show different cases of driver ops/callbacks
being invoked after the driver .remove().
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000150
kernel: Workqueue: events cdns_update_slave_status_work [soundwire_cadence]
kernel: RIP: 0010:mutex_lock+0x19/0x30
kernel: Call Trace:
kernel: ? sdw_handle_slave_status+0x426/0xe00 [soundwire_bus 94ff184bf398570c3f8ff7efe9e32529f532e4ae]
kernel: ? newidle_balance+0x26a/0x400
kernel: ? cdns_update_slave_status_work+0x1e9/0x200 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82]
kernel: BUG: unable to handle page fault for address: ffffffffc07654c8
kernel: Workqueue: pm pm_runtime_work
kernel: RIP: 0010:sdw_bus_prep_clk_stop+0x6f/0x160 [soundwire_bus]
kernel: Call Trace:
kernel: <TASK>
kernel: sdw_cdns_clock_stop+0xb5/0x1b0 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82]
kernel: intel_suspend_runtime+0x5f/0x120 [soundwire_intel aca858f7c87048d3152a4a41bb68abb9b663a1dd]
kernel: ? dpm_sysfs_remove+0x60/0x60
This was not detected earlier in Intel tests since the tests first
remove the parent PCI device and shut down the bus. The sequence
above is a corner case which keeps the bus operational but without a
driver bound.
While trying to solve this kernel oopses, it became clear that the
existing SoundWire bus does not deal well with the unbind case.
Commit 528be501b7d4a ("soundwire: sdw_slave: add probe_complete structure and new fields")
added a 'probed' status variable and a 'probe_complete'
struct completion. This status is however not reset on remove and
likewise the 'probe complete' is not re-initialized, so the
bind/unbind/bind test cases would fail. The timeout used before the
'update_status' callback was also a bad idea in hindsight, there
should really be no timing assumption as to if and when a driver is
bound to a device.
An initial draft was based on device_lock() and device_unlock() was
tested. This proved too complicated, with deadlocks created during the
suspend-resume sequences, which also use the same device_lock/unlock()
as the bind/unbind sequences. On a CometLake device, a bad DSDT/BIOS
caused spurious resumes and the use of device_lock() caused hangs
during suspend. After multiple weeks or testing and painful
reverse-engineering of deadlocks on different devices, we looked for
alternatives that did not interfere with the device core.
A bus notifier was used successfully to keep track of DRIVER_BOUND and
DRIVER_UNBIND events. This solved the bind-unbind-bind case in tests,
but it can still be defeated with a theoretical corner case where the
memory is freed by a .remove while the callback is in use. The
notifier only helps make sure the driver callbacks are valid, but not
that the memory allocated in probe remains valid while the callbacks
are invoked.
This patch suggests the introduction of a new 'sdw_dev_lock' mutex
protecting probe/remove and all driver callbacks. Since this mutex is
'local' to SoundWire only, it does not interfere with existing locks
and does not create deadlocks. In addition, this patch removes the
'probe_complete' completion, instead we directly invoke the
'update_status' from the probe routine. That removes any sort of
timing dependency and a much better support for the device/driver
model, the driver could be bound before the bus started, or eons after
the bus started and the hardware would be properly initialized in all
cases.
BugLink: https://github.com/thesofproject/linux/issues/3531
Fixes: 56d4fe31af77 ("soundwire: Add MIPI DisCo property helpers")
Fixes: 528be501b7d4a ("soundwire: sdw_slave: add probe_complete structure and new fields")
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Context tracking's __ct_state() function can be invoked from noinstr state
where RCU is not watching. This means that its use of atomic_read()
causes KASAN to invoke the non-noinstr __kasan_check_read() function
from the noinstr function __ct_state(). This is problematic because
someone tracing the __kasan_check_read() function could get a nasty
surprise because of RCU not watching.
This commit therefore replaces the __ct_state() function's use of
atomic_read() with arch_atomic_read(), which KASAN does not attempt to
add instrumention to.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Marco Elver <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
|
|
Context tracking's state and dynticks counter are going to be merged
in a single field so that both updates can happen atomically and at the
same time. Prepare for that with converting the state into an atomic_t.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
Some eqs functions are now only used internally by context tracking, so
their public declarations can be removed.
Also middle functions such as rcu_user_*() and rcu_idle_*()
which now directly call to rcu_eqs_enter() and rcu_eqs_exit() can be
wiped out as well.
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
Move the core RCU eqs/dynticks functions to context tracking so that
we can later merge all that code within context tracking.
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
To prepare for migrating the RCU eqs accounting code to context tracking,
split the last-resort deferred nocb resched from rcu_user_enter() and
move it into a separate call from context tracking.
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
In order to prepare for merging RCU dynticks counter into the context
tracking state, move the rcu_data's dynticks field to the context
tracking structure. It will later be mixed within the context tracking
state itself.
[ paulmck: Move enum ctx_state into global scope. ]
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
Now rcu_irq_enter/exit() is an unnecessary middle call between
ct_irq_enter/exit() and nmi_irq_enter/exit(). Take this opportunity
to remove the former functions and move the comments above them to the
new entrypoints.
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the NMI extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the IRQ extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.
[ paulmck: Apply Stephen Rothwell feedback from -next. ]
[ paulmck: Apply Nathan Chancellor feedback. ]
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Start with moving the idle extended quiescent states
entrypoints to context tracking. For now those are dumb redirections to
existing RCU calls.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Xiongfeng Wang <[email protected]>
Cc: Yu Liao <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Paul Gortmaker<[email protected]>
Cc: Alex Belits <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
|
|
Previously the CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP device_init_wakeup()
implementations differed in confusing ways:
- The PM_SLEEP version checked for a NULL device pointer and returned
-EINVAL, while the !PM_SLEEP version did not and would simply
dereference a NULL pointer.
- When called with "false", the !PM_SLEEP version cleared "capable" and
"enable" in the opposite order of the PM_SLEEP version. That was
harmless because for !PM_SLEEP they're simple assignments, but it's
unnecessary confusion.
Use a simplified version of the PM_SLEEP implementation for both cases.
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Previously the kernel used to ignore whether the firmware masked CPPC
or CPPCv2 and would just pretend that it worked.
When support for the USB4 bit in _OSC was introduced from commit
9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
the kernel began to look at the return when the query bit was clear.
This caused regressions that were misdiagnosed and attempted to be solved
as part of commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities
to the _OSC regardless of the query flag""). This caused a different
regression where non-Intel systems weren't able to negotiate _OSC
properly.
This was reverted in commit 2ca8e6285250 ("Revert "ACPI: Pass the same
capabilities to the _OSC regardless of the query flag"") and attempted to
be fixed by commit c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not
supported by firmware") but the regression still returned.
These systems with the regression only load support for CPPC from an SSDT
dynamically when _OSC reports CPPC v2. Avoid the problem by not letting
CPPC satisfy the requirement in `acpi_cppc_processor_probe`.
Reported-by: CUI Hao <[email protected]>
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Fixes: c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware")
Fixes: 2ca8e6285250 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387
Reviewed-by: Mika Westerberg <[email protected]>
Tested-by: CUI Hao <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Currently acpi_viot_init() gets called after the pci
device has been scanned and pci_enable_acs() has been called.
So pci_request_acs() fails to be taken into account leading
to wrong single iommu group topologies when dealing with
multi-function root ports for instance.
We cannot simply move the acpi_viot_init() earlier, similarly
as the IORT init because the VIOT parsing relies on the pci
scan. However we can detect VIOT is present earlier and in
such a case, request ACS. Introduce a new acpi_viot_early_init()
routine that allows to call pci_request_acs() before the scan.
While at it, guard the call to pci_request_acs() with #ifdef
CONFIG_PCI.
Fixes: 3cf485540e7b ("ACPI: Add driver for the VIOT table")
Signed-off-by: Eric Auger <[email protected]>
Reported-by: Jin Liu <[email protected]>
Reviewed-by: Jean-Philippe Brucker <[email protected]>
Tested-by: Jean-Philippe Brucker <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
If an NFS file is opened for writing and closed, fscache_invalidate() will
be asked to invalidate the file - however, if the cookie is in the
LOOKING_UP state (or the CREATING state), then request to invalidate
doesn't get recorded for fscache_cookie_state_machine() to do something
with.
Fix this by making __fscache_invalidate() set a flag if it sees the cookie
is in the LOOKING_UP state to indicate that we need to go to invalidation.
Note that this requires a count on the n_accesses counter for the state
machine, which that will release when it's done.
fscache_cookie_state_machine() then shifts to the INVALIDATING state if it
sees the flag.
Without this, an nfs file can get corrupted if it gets modified locally and
then read locally as the cache contents may not get updated.
Fixes: d24af13e2e23 ("fscache: Implement cookie invalidation")
Reported-by: Max Kellermann <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: Max Kellermann <[email protected]>
Link: https://lore.kernel.org/r/[email protected] [1]
|
|
If CONFIG_DMA_DECLARE_COHERENT is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu- will be failed, like this:
drivers/remoteproc/remoteproc_core.c: In function ‘rproc_rvdev_release’:
./include/linux/dma-map-ops.h:182:42: error: statement with no effect [-Werror=unused-value]
#define dma_release_coherent_memory(dev) (0)
^
drivers/remoteproc/remoteproc_core.c:464:2: note: in expansion of macro ‘dma_release_coherent_memory’
dma_release_coherent_memory(dev);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The return type of function dma_release_coherent_memory in CONFIG_DMA_DECLARE_COHERENT area is void, so in !CONFIG_DMA_DECLARE_COHERENT area it should neither return any value nor be defined as zero.
Reported-by: Hulk Robot <[email protected]>
Fixes: e61c451476e6 ("dma-mapping: Add dma_release_coherent_memory to DMA API")
Signed-off-by: Ren Zhijie <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
The sole user of this find_acpi_cpu_cache_topology() was arm64 topology
which is now consolidated into the generic arch_topology without the need
of this function.
Drop the unused function find_acpi_cpu_cache_topology().
Link: https://lore.kernel.org/r/[email protected]
Cc: Rafael J. Wysocki <[email protected]>
Reported-by: Ionela Voinescu <[email protected]>
Tested-by: Conor Dooley <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Since the cacheinfo LLC information is used directly in arch_topology,
there is no need to parse and store the LLC ID information only for
ACPI systems in the CPU topology.
Remove the redundant LLC ID from the generic CPU arch_topology
information.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Ionela Voinescu <[email protected]>
Tested-by: Conor Dooley <[email protected]>
Reviewed-by: Gavin Shan <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Some architecture/platforms may need to setup cache properties very
early in the boot along with other cpu topologies so that all these
information can be used to build sched_domains which is used by the
scheduler.
Allow detect_cache_attributes to be called quite early during the boot.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Ionela Voinescu <[email protected]>
Tested-by: Conor Dooley <[email protected]>
Reviewed-by: Gavin Shan <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
It is useful to have helper to check if the given two CPUs share last
level cache. We can do that check by comparing fw_token or by comparing
the cache ID. Currently we check just for fw_token as the cache ID is
optional.
This helper can be used to build the llc_sibling during arch specific
topology parsing and feeding information to the sched_domains. This also
helps to get rid of llc_id in the CPU topology as it is sort of duplicate
information.
Also add helper to check if the llc information in cacheinfo is valid
or not.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Ionela Voinescu <[email protected]>
Tested-by: Conor Dooley <[email protected]>
Reviewed-by: Gavin Shan <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add SCMIv3.1 powercap protocol fast channel support using common helpers
provided by the SCMI core with scmi_proto_helpers_ops operations.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add support for SCMI v3.1 powercap protocol, with the exception of powercap
fast channels, exposing all the new related powercap protocol operations as
usual in include/linux/scmi_protocol.h.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add a method to get hold of a protocol, causing it to be initialized and
its resource accounting updated, without getting access to its operations
and handle.
Some protocols, like SCMI SystemPower, do not expose any protocol ops to
the kernel OSPM agent but still need to be at least initialized. This
helper avoids the need to invoke a full devm_get_protocol() only to get
the protocol initialized while throwing away unused the protocol ops and
handle.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add support for SCMIv3.1 System Power optional timeout field while
dispatching SYSTEM_POWER_STATE_NOTIFIER notification.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add device managed bulk API to simplify driver.
Signed-off-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.
As per the devicetree bindings, BCM2711 will provide both the old and
new ASB resources, so get both of them and pass them into
'bcm2835-power,' which will take care of selecting which one to use
accordingly.
Since the RPiVid ASB's resources were being provided prior to formalizing
the bindings[1], also support the old DT files that didn't use
'reg-names.'
[1] See: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add support for BCM53128 internal PHYs. These support interrupts as well as
statistics. Therefore, enable the Broadcom PHY driver for them.
Tested on BCM53128 switch using the mainline b53 DSA driver.
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
4feee7d1260 previously added per-task forced idle accounting. This patch
extends this to also include cgroups.
rstat is used for cgroup accounting, except for the root, which uses
kcpustat in order to bypass the need for doing an rstat flush when
reading root stats.
Only cgroup v2 is supported. Similar to the task accounting, the cgroup
accounting requires that schedstats is enabled.
Signed-off-by: Josh Don <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Transhuge swapcaches won't be freed in __collapse_huge_page_copy(). It's
because release_pte_page() is not called for these pages and thus
free_page_and_swap_cache can't grab the page lock. These pages won't be
freed from swap cache even if we are the only user until next time
reclaim. It shouldn't hurt indeed, but we could try to free these pages
to save more memory for system.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Zach O'Keefe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit e5251fd43007 ("mm/hugetlb: introduce set_huge_swap_pte_at()
helper") add set_huge_swap_pte_at() to handle swap entries on
architectures that support hugepages consisting of contiguous ptes. And
currently the set_huge_swap_pte_at() is only overridden by arm64.
set_huge_swap_pte_at() provide a sz parameter to help determine the number
of entries to be updated. But in fact, all hugetlb swap entries contain
pfn information, so we can find the corresponding folio through the pfn
recorded in the swap entry, then the folio_size() is the number of entries
that need to be updated.
And considering that users will easily cause bugs by ignoring the
difference between set_huge_swap_pte_at() and set_huge_pte_at(). Let's
handle swap entries in set_huge_pte_at() and remove the
set_huge_swap_pte_at(), then we can call set_huge_pte_at() anywhere, which
simplifies our coding.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qi Zheng <[email protected]>
Acked-by: Muchun Song <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Comments that mention mem_hotplug_end() are confusing as there is no
function called mem_hotplug_end(). Fix them by replacing all the
occurences of mem_hotplug_end() in the comments with mem_hotplug_done().
[[email protected]: grammatical fixes]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yun-Ze Li <[email protected]>
Cc: Souptick Joarder <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
memmap_on_memory
For now, the feature of hugetlb_free_vmemmap is not compatible with the
feature of memory_hotplug.memmap_on_memory, and hugetlb_free_vmemmap takes
precedence over memory_hotplug.memmap_on_memory. However, someone wants
to make memory_hotplug.memmap_on_memory takes precedence over
hugetlb_free_vmemmap since memmap_on_memory makes it more likely to
succeed memory hotplug in close-to-OOM situations. So the decision of
making hugetlb_free_vmemmap take precedence is not wise and elegant.
The proper approach is to have hugetlb_vmemmap.c do the check whether the
section which the HugeTLB pages belong to can be optimized. If the
section's vmemmap pages are allocated from the added memory block itself,
hugetlb_free_vmemmap should refuse to optimize the vmemmap, otherwise, do
the optimization. Then both kernel parameters are compatible. So this
patch introduces VmemmapSelfHosted to mask any non-optimizable vmemmap
pages. The hugetlb_vmemmap can use this flag to detect if a vmemmap page
can be optimized.
[[email protected]: walk vmemmap page tables to avoid false-positive]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Muchun Song <[email protected]>
Co-developed-by: Oscar Salvador <[email protected]>
Signed-off-by: Oscar Salvador <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Xiongchun Duan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "make hugetlb_optimize_vmemmap compatible with
memmap_on_memory", v3.
This series makes hugetlb_optimize_vmemmap compatible with
memmap_on_memory.
This patch (of 2):
We are almost running out of section flags, only one bit is available in
the worst case (powerpc with 256k pages). However, there are still some
free bits (in ->section_mem_map) on other architectures (e.g. x86_64 has
10 bits available, arm64 has 8 bits available with worst case of 64K
pages). We have hard coded those numbers in code, it is inconvenient to
use those bits on other architectures except powerpc. So transfer those
section flags to enumeration to make it easy to add new section flags in
the future. Also, move SECTION_TAINT_ZONE_DEVICE into the scope of
CONFIG_ZONE_DEVICE to save a bit on non-zone-device case.
[[email protected]: replace enum with defines per David]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Muchun Song <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Xiongchun Duan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
All callers now have a folio, so push the folio->page conversion
down to this function.
[[email protected]: uninline destroy_large_folio() to fix build issue]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Saves 11 bytes of text by removing a check of PageTail.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
__pagevec_lru_add has no callers outside swap.c, so make it static,
and move it to a more logical position in the file.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "Convert the swap code to be more folio-based".
There's still more to do with the swap code, but this reaps a lot of the
folio benefit. More than 4kB of kernel text saved (with the UEK7 kernel
config). I don't know how much that's going to translate into CPU
savings, but some of those compound_head() calls are on every page free,
so it should be noticable. It might even be noticable just from an
I-cache consumption perspective.
This patch (of 22):
This is just a wrapper around release_pages() for now. Place the
prototype in mm.h along with folio_put() and folio_put_refs().
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "nvert much of vmscan to folios"
vmscan always operates on folios since it puts the pages on the LRU list.
Switching all of these functions from pages to folios saves 1483 bytes of
text from removing all the baggage around calling compound_page() and
similar functions.
This patch (of 5):
This is a straightforward conversion which removes several hidden calls
to compound_head, saving 330 bytes of kernel text.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Suggested-by: Peter Collingbourne <[email protected]>
Acked-by: Peter Xu <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Mel Gorman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This commit adds a new DAMON-based operation scheme action called
'LRU_DEPRIO' for physical address space. The action deprioritizes pages
in the memory area of the target access pattern on their LRU lists. This
is hence supposed to be used for rarely accessed (cold) memory regions so
that cold pages could be more likely reclaimed first under memory
pressure. Internally, it simply calls 'lru_deactivate()'.
Using this with 'LRU_PRIO' action for hot pages, users can proactively
sort LRU lists based on the access pattern. That is, it can make the LRU
lists somewhat more trustworthy source of access temperature. As a
result, efficiency of LRU-lists based mechanisms including the reclamation
target selection could be improved.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This commit adds a new DAMOS action called 'LRU_PRIO' for the physical
address space. The action prioritizes pages in the memory regions of the
user-specified target access pattern on their LRU lists. This is hence
supposed to be used for frequently accessed (hot) memory regions so that
hot pages could be more likely protected under memory pressure.
Internally, it simply calls 'mark_page_accessed()'.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[[email protected]: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This commit introduces the /sys/kernel/debug/shrinker debugfs interface
which provides an ability to observe the state of individual kernel memory
shrinkers.
Because the feature adds some memory overhead (which shouldn't be large
unless there is a huge amount of registered shrinkers), it's guarded by a
config option (enabled by default).
This commit introduces the "count" interface for each shrinker registered
in the system.
The output is in the following format:
<cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>...
<cgroup inode id> <nr of objects on node 0> <nr of objects on node 1>...
...
To reduce the size of output on machines with many thousands cgroups, if
the total number of objects on all nodes is 0, the line is omitted.
If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed as
cgroup inode id. If the shrinker is not numa-aware, 0's are printed for
all nodes except the first one.
This commit gives debugfs entries simple numeric names, which are not very
convenient. The following commit in the series will provide shrinkers
with more meaningful names.
[[email protected]: remove WARN_ON_ONCE(), per Roman]
Reported-by: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin <[email protected]>
Reviewed-by: Kent Overstreet <[email protected]>
Acked-by: Muchun Song <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Hillf Danton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm: introduce shrinker debugfs interface", v5.
The only existing debugging mechanism is a couple of tracepoints in
do_shrink_slab(): mm_shrink_slab_start and mm_shrink_slab_end. They
aren't covering everything though: shrinkers which report 0 objects will
never show up, there is no support for memcg-aware shrinkers. Shrinkers
are identified by their scan function, which is not always enough (e.g.
hard to guess which super block's shrinker it is having only
"super_cache_scan").
To provide a better visibility and debug options for memory shrinkers this
patchset introduces a /sys/kernel/debug/shrinker interface, to some extent
similar to /sys/kernel/slab.
For each shrinker registered in the system a directory is created. As
now, the directory will contain only a "scan" file, which allows to get
the number of managed objects for each memory cgroup (for memcg-aware
shrinkers) and each numa node (for numa-aware shrinkers on a numa
machine). Other interfaces might be added in the future.
To make debugging more pleasant, the patchset also names all shrinkers, so
that debugfs entries can have meaningful names.
This patch (of 5):
Shrinker debugfs requires a way to represent memory cgroups without using
full paths, both for displaying information and getting input from a user.
Cgroup inode number is a perfect way, already used by bpf.
This commit adds a couple of helper functions which will be used to handle
memcg-aware shrinkers.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin <[email protected]>
Acked-by: Muchun Song <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Roman Gushchin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a clear_highpage_kasan_tagged() helper that does clear_highpage() on a
page potentially tagged by KASAN.
This helper is used by the following patch.
Link: https://lkml.kernel.org/r/4471979b46b2c487787ddcd08b9dc5fedd1b6ffd.1654798516.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Marco Elver <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The function for knowing if given monitoring context's targets will have
pid or not is defined and used in dbgfs only. However, the logic is also
needed for sysfs. This commit moves the code to damon.h and makes both
dbgfs and sysfs to use it.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|