| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix this doc build warning:
./include/linux/serial_core.h:397: warning: Function parameter or member 'start_rx' not described in 'uart_ops'
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/5d07ae2eec8fbad87e623160f9926b178bef2744.1660829433.git.mchehab@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
blk_mq_queue_stopped() doesn't have any caller, which was found by
code coverage test, thus remove it.
Signed-off-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
A few regulator consumer drivers seem to be just getting a regulator,
enabling it and registering a devm-action to disable the regulator at
the driver detach and then forget about it.
We can simplify this a bit by adding a devm-helper for this pattern.
Add devm_regulator_get_enable() and devm_regulator_get_enable_optional()
Signed-off-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/r/ed7b8841193bb9749d426f3cb3b199c9460794cd.1660292316.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <[email protected]>
|
|
The 'has_crossts' flag was not used anywhere in the stmmac driver,
removing it from both header file and dwmac-intel driver.
Signed-off-by: Wong Vee Khee <[email protected]>
Reviewed-by: Kurt Kanzenbach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Andrii Nakryiko says:
====================
bpf-next 2022-08-17
We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).
The main changes are:
1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
Kanzenbach and Jesper Dangaard Brouer.
2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.
3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.
4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.
5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
unsupported names on old kernels, from Hangbin Liu.
6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
from Hao Luo.
7) Relax libbpf's requirement for shared libs to be marked executable, from
Henqgi Chen.
8) Improve bpf_iter internals handling of error returns, from Hao Luo.
9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.
10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.
11) bpftool improvements to handle full BPF program names better, from Manu
Bretelle.
12) bpftool fixes around libcap use, from Quentin Monnet.
13) BPF map internals clean ups and improvements around memory allocations,
from Yafang Shao.
14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
iterator to work on cgroupv1, from Yosry Ahmed.
15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.
16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
selftests/bpf: Few fixes for selftests/bpf built in release mode
libbpf: Clean up deprecated and legacy aliases
libbpf: Streamline bpf_attr and perf_event_attr initialization
libbpf: Fix potential NULL dereference when parsing ELF
selftests/bpf: Tests libbpf autoattach APIs
libbpf: Allows disabling auto attach
selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
selftests/bpf: Update CI kconfig
selftests/bpf: Add connmark read test
selftests/bpf: Add existing connection bpf_*_ct_lookup() test
bpftool: Clear errno after libcap's checks
bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
bpftool: Fix a typo in a comment
libbpf: Add names for auxiliary maps
bpf: Use bpf_map_area_alloc consistently on bpf map creation
bpf: Make __GFP_NOWARN consistent in bpf map creation
bpf: Use bpf_map_area_free instread of kvfree
bpf: Remove unneeded memset in queue_stack_map creation
libbpf: preserve errno across pr_warn/pr_info/pr_debug
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
filldir_t instances (directory iterators callbacks) used to return 0 for
"OK, keep going" or -E... for "stop". Note that it's *NOT* how the
error values are reported - the rules for those are callback-dependent
and ->iterate{,_shared}() instances only care about zero vs. non-zero
(look at emit_dir() and friends).
So let's just return bool ("should we keep going?") - it's less confusing
that way. The choice between "true means keep going" and "true means
stop" is bikesheddable; we have two groups of callbacks -
do something for everything in directory, until we run into problem
and
find an entry in directory and do something to it.
The former tended to use 0/-E... conventions - -E<something> on failure.
The latter tended to use 0/1, 1 being "stop, we are done".
The callers treated anything non-zero as "stop", ignoring which
non-zero value did they get.
"true means stop" would be more natural for the second group; "true
means keep going" - for the first one. I tried both variants and
the things like
if allocation failed
something = -ENOMEM;
return true;
just looked unnatural and asking for trouble.
[folded suggestion from Matthew Wilcox <[email protected]>]
Acked-by: Christian Brauner (Microsoft) <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.
|
|
All the drivers are converted to the new OF API, remove the old OF code.
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The following changes are reworking entirely the thermal device tree
initialization. The old version is kept until the different drivers
using it are converted to the new API.
The old approach creates the different actors independently. This
approach is the source of the code duplication in the thermal OF
because a thermal zone is created but a sensor is registered
after. The thermal zones are created unconditionnaly with a fake
sensor at init time, thus forcing to provide fake ops and store all
the thermal zone related information in duplicated structures. Then
the sensor is initialized and the code looks up the thermal zone name
using the device tree. Then the sensor is associated to the thermal
zone, and the sensor specific ops are called with a second level of
indirection from the thermal zone ops.
When a sensor is removed (with a module unload), the thermal zone
stays there with the fake sensor.
The cooling device associated with a thermal zone and a trip point is
stored in a list, again duplicating information, using the node name
of the device tree to match afterwards the cooling devices.
The new approach is simpler, it creates a thermal zone when the sensor
is registered and destroys it when the sensor is removed. All the
matching between the cooling device, trip points and thermal zones are
done using the device tree, as well as bindings. The ops are no longer
specific but uses the generic ones provided by the thermal framework.
When the old code won't have any users, it can be removed and the
remaining thermal OF code will be much simpler.
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
This helper provides an optional delay parameter to wait for devices
to resync in case of errors, and checks that devices are indeed
attached on the bus.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The existing manager ops provide callbacks to transfer read/write
commands, but don't allow for direct access to PING status
register. This is accessible in all existing IP, and would help
diagnose timeouts or resume issues by reporting the 'true' status
instead of the internal status reported by the IP.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Several architectures have accelerated operations for MMIO
operations writing to a single register, such as writesb, writesw,
writesl, writesq, readsb, readsw, readsl and readsq but regmap
currently cannot use them because we have no hooks for providing
an accelerated noinc back-end for MMIO.
Solve this by providing reg_[read/write]_noinc callbacks for
the bus abstraction, so that the regmap-mmio bus can use this.
Currently I do not see a need to support this for custom regmaps
so it is only added to the bus.
Callbacks are passed a void * with the array of values and a
count which is the number of items of the byte chunk size for
the specific register width.
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Implement the suspend/resume procedure for the Broadcom AC131 and BCM5241 type
of PHYs (10/100 only) by entering the standard power down followed by the
proprietary standby mode in the auxiliary mode 4 shadow register. On resume,
the PHY software reset is enough to make it come out of standby mode so we can
utilize brcm_fet_config_init() as the resume hook.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
User namespaces are an effective tool to allow programs to run with
permission without requiring the need for a program to run as root. User
namespaces may also be used as a sandboxing technique. However, attackers
sometimes leverage user namespaces as an initial attack vector to perform
some exploit. [1,2,3]
While it is not the unprivileged user namespace functionality, which
causes the kernel to be exploitable, users/administrators might want to
more granularly limit or at least monitor how various processes use this
functionality, while vulnerable kernel subsystems are being patched.
Preventing user namespace already creation comes in a few of forms in
order of granularity:
1. /proc/sys/user/max_user_namespaces sysctl
2. Distro specific patch(es)
3. CONFIG_USER_NS
To block a task based on its attributes, the LSM hook cred_prepare is a
decent candidate for use because it provides more granular control, and
it is called before create_user_ns():
cred = prepare_creds()
security_prepare_creds()
call_int_hook(cred_prepare, ...
if (cred)
create_user_ns(cred)
Since security_prepare_creds() is meant for LSMs to copy and prepare
credentials, access control is an unintended use of the hook. [4]
Further, security_prepare_creds() will always return a ENOMEM if the
hook returns any non-zero error code.
This hook also does not handle the clone3 case which requires us to
access a user space pointer to know if we're in the CLONE_NEW_USER
call path which may be subject to a TOCTTOU attack.
Lastly, cred_prepare is called in many call paths, and a targeted hook
further limits the frequency of calls which is a beneficial outcome.
Therefore introduce a new function security_create_user_ns() with an
accompanying userns_create LSM hook.
With the new userns_create hook, users will have more control over the
observability and access control over user namespace creation. Users
should expect that normal operation of user namespaces will behave as
usual, and only be impacted when controls are implemented by users or
administrators.
This hook takes the prepared creds for LSM authors to write policy
against. On success, the new namespace is applied to credentials,
otherwise an error is returned.
Links:
1. https://nvd.nist.gov/vuln/detail/CVE-2022-0492
2. https://nvd.nist.gov/vuln/detail/CVE-2022-25636
3. https://nvd.nist.gov/vuln/detail/CVE-2022-34918
4. https://lore.kernel.org/all/[email protected]/
Reviewed-by: Christian Brauner (Microsoft) <[email protected]>
Reviewed-by: KP Singh <[email protected]>
Signed-off-by: Frederick Lawler <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
All users ignore the return value of icc_provider_del(). Consequently
make it not return an error code.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <[email protected]>
Reviewed-by: Jeremy Kerr <[email protected]>
Reviewed-by: Benjamin Mugnier <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Crt Mori <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Marek Behún <[email protected]> # for leds-turris-omnia
Acked-by: Andy Shevchenko <[email protected]>
Reviewed-by: Petr Machata <[email protected]> # for mlxsw
Reviewed-by: Maximilian Luz <[email protected]> # for surface3_power
Acked-by: Srinivas Pandruvada <[email protected]> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <[email protected]> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <[email protected]> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <[email protected]> # for versaclock5
Reviewed-by: Ajay Gupta <[email protected]> # for ucsi_ccg
Acked-by: Jonathan Cameron <[email protected]> # for iio
Acked-by: Peter Rosin <[email protected]> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <[email protected]> # for lontium-lt8912b
Reviewed-by: Jean Delvare <[email protected]> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <[email protected]> # for IPMI
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Acked-by: Sebastian Reichel <[email protected]> # for drivers/power
Acked-by: Krzysztof Hałasa <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
All platforms that provide a teardown callback return 0. New users are
supposed to not make use of platform support, so there is no
functionality lost.
This patch is a preparation for making i2c remove callbacks return void.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fix variable names in some kerneldocs, naming in others.
Add kerneldocs for struct vring_desc and vring_interrupt.
Signed-off-by: Ricardo Cañuelo <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
|
|
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba037714 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <[email protected]>
Message-Id: <[email protected]>
|
|
This reverts commit fe3dc04e31aa51f91dc7f741a5f76cc4817eb5b4: the
API is now unused and in fact can't be implemented on top of a legacy
device.
Fixes: fe3dc04e31aa ("virtio: add helper virtio_find_vqs_ctx_size()")
Cc: "Xuan Zhuo" <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Message-Id: <[email protected]>
|
|
cgroup_psi() is only called under CONFIG_CGROUPS.
We don't need cgroup_psi() when !CONFIG_CGROUPS,
so we can remove it in this case.
Signed-off-by: Hao Jia <[email protected]>
Reviewed-by: Ingo Molnar <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
psi_trigger_create()'s 'nbytes' parameter is not used, so we can remove it.
Signed-off-by: Hao Jia <[email protected]>
Reviewed-by: Ingo Molnar <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Address an ABI gap for device where the offset of both lines in a
differential pair may be controlled so as to allow a wider range of
inputs, but without having any direct effect of the differential
measurement.
_offset cannot be used as to remain in line with existing usage,
userspace would be expected to apply it as (_raw + _offset) * _scale
whereas _zeropoint is not. i.e. If we were computing the differential
in software it would be.
((postive_raw + _zeropoint) - (negative_raw + zeropoint) + _offset) * _scale
= ((postive_raw - negative_raw) + _offset) * _scale
= (differential_raw + _offset) * _scale
Similarly calibbias is expected to tweak the measurement seen, not
the adjust the two lines of the differential pair.
Needed for in_capacitanceX-capacitanceY_zeropoint for the
AD7746 CDC driver.
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Since all users of the OF dependendent API are now converted to use the
firmware agnostic alternative, we can drop OF dependencies from the IIO
in kernel interface.
Signed-off-by: Nuno Sá <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This moves the IIO in kernel interface to use fwnode properties and thus
be firmware agnostic.
Note that the interface is still not firmware agnostic. At this point we
have both OF and fwnode interfaces so that we don't break any user. On
top of this we also want to have a per driver conversion and that is the
main reason we have both of_xlate() and fwnode_xlate() support.
Signed-off-by: Nuno Sá <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Every cgroup knows all its ancestors through its ->ancestor_ids[]. There's
no advantage to remembering the IDs instead of the pointers directly and
this makes the array useless for finding an actual ancestor cgroup forcing
cgroup_ancestor() to iteratively walk up the hierarchy instead. Let's
replace cgroup->ancestor_ids[] with ->ancestors[] and remove the walking-up
from cgroup_ancestor().
While at it, improve comments around cgroup_root->cgrp_ancestor_storage.
This patch shouldn't cause user-visible behavior differences.
v2: Update cgroup_ancestor() to use ->ancestors[].
v3: cgroup_root->cgrp_ancestor_storage's type is updated to match
cgroup->ancestors[]. Better comments.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
|
|
In the uniprocessor case, cpumask_next_wrap() can be simplified, as the
number of valid argument combinations is limited:
- 'start' can only be 0
- 'n' can only be -1 or 0
The only valid CPU that can then be returned, if any, will be the first
one set in the provided 'mask'.
For NR_CPUS == 1, include/linux/cpumask.h now provides an inline
definition of cpumask_next_wrap(), which will conflict with the one
provided by lib/cpumask.c. Make building of lib/cpumask.o again depend
on CONFIG_SMP=y (i.e. NR_CPUS > 1) to avoid the re-definition.
Suggested-by: Yury Norov <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
Between the generic version, and their uniprocessor optimised
implementations, the return types of cpumask_any_and_distribute() and
cpumask_any_distribute() are not identical. Change the UP versions to
'unsigned int', to match the generic versions.
Suggested-by: Yury Norov <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).
Fix the mask and other related definitions accordingly.
Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Some users may use regmap MMIO for IO ports, and this can be done
by assigning ioreadXX()/iowriteXX() and their Big Endian counterparts
to the regmap context.
Add IO port support with a corresponding flag added.
While doing that, make sure that user won't select relaxed MMIO access
along with IO port because the latter have no relaxed variants.
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: William Breathitt Gray <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <[email protected]>
CC: Andy Shevchenko <[email protected]>
CC: Andrew Morton <[email protected]>
CC: Jason A. Donenfeld <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc timer fixes:
- fix a potential use-after-free bug in posix timers
- correct a prototype
- address a build warning"
* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
posix-timers: Make do_clock_gettime() static
|
|
Pull io_uring fixes from Jens Axboe:
- Regression fix for this merge window, fixing a wrong order of
arguments for io_req_set_res() for passthru (Dylan)
- Fix for the audit code leaking context memory (Peilin)
- Ensure that provided buffers are memcg accounted (Pavel)
- Correctly handle short zero-copy sends (Pavel)
- Sparse warning fixes for the recvmsg multishot command (Dylan)
- Error handling fix for passthru (Anuj)
- Remove randomization of struct kiocb fields, to avoid it growing in
size if re-arranged in such a fashion that it grows more holes or
padding (Keith, Linus)
- Small series improving type safety of the sqe fields (Stefan)
* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
io_uring: make io_kiocb_to_cmd() typesafe
fs: don't randomize struct kiocb fields
io_uring: consistently make use of io_notif_to_data()
io_uring: fix error handling for io_uring_cmd
io_uring: fix io_recvmsg_prep_multishot sparse warnings
io_uring/net: send retry for zerocopy
io_uring: mem-account pbuf buckets
audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
io_uring: pass correct parameters to io_req_set_res
|
|
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Currently, when the writeback code detects a server reboot, it redirties
any pages that were not committed to disk, and it sets the flag
NFS_CONTEXT_RESEND_WRITES in the nfs_open_context of the file descriptor
that dirtied the file. While this allows the file descriptor in question
to redrive its own writes, it violates the fsync() requirement that we
should be synchronising all writes to disk.
While the problem is infrequent, we do see corner cases where an
untimely server reboot causes the fsync() call to abandon its attempt to
sync data to disk and causing data corruption issues due to missed error
conditions or similar.
In order to tighted up the client's ability to deal with this situation
without introducing livelocks, add a counter that records the number of
times pages are redirtied due to a server reboot-like condition, and use
that in fsync() to redrive the sync to disk.
Fixes: 2197e9b06c22 ("NFS: Fix up fsync() when the server rebooted")
Cc: [email protected]
Signed-off-by: Trond Myklebust <[email protected]>
|
|
We need to make sure (at build time) that struct io_cmd_data is not
casted to a structure that's larger.
Signed-off-by: Stefan Metzmacher <[email protected]>
Link: https://lore.kernel.org/r/c024cdf25ae19fc0319d4180e2298bade8ed17b8.1660201408.git.metze@samba.org
Signed-off-by: Jens Axboe <[email protected]>
|
|
This is a size sensitive structure and randomizing can introduce extra
padding that breaks io_uring's fixed size expectations. There are few
fields here as it is, half of which need a fixed order to optimally
pack, so the randomization isn't providing much.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Link: https://lore.kernel.org/io-uring/[email protected]/
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
|
|
Remove some extra '0'
s/BMA0150_RANGE_xxx/BMA150_RANGE_xxx/
s/BMA0150_BW_xxx/BMA150_BW_xxx
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/a331a6244a1dfbf34dc85f1be6995fa91500c801.1659802757.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning"
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix up direct references to the fwnode field in struct device
and extend ACPI device properties support.
Specifics:
- Replace direct references to the fwnode field in struct device with
dev_fwnode() and device_match_fwnode() (Andy Shevchenko)
- Make the ACPI code handling device properties support properties
with buffer values (Sakari Ailus)"
* tag 'acpi-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: VIOT: Do not dereference fwnode in struct device
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
|
|
Pull more iomap updates from Darrick Wong:
"In the past 10 days or so I've not heard any ZOMG STOP style
complaints about removing ->writepage support from gfs2 or zonefs, so
here's the pull request removing them (and the underlying fs iomap
support) from the kernel:
- Remove iomap_writepage and all callers, since the mm apparently
never called the zonefs or gfs2 writepage functions"
* tag 'iomap-6.0-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: remove iomap_writepage
zonefs: remove ->writepage
gfs2: remove ->writepage
gfs2: stop using generic_writepages in gfs2_ail1_start_one
|
|
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
|
|
Merge changes adding support for device properties with buffer values
to the ACPI device properties handling code.
* acpi-properties:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
|
|
This operation is optional: It it's not implemented, backend feature bit
will not be exposed.
Signed-off-by: Eugenio Pérez <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Implement the suspend callback allowing to suspend the virtqueues so
they stop processing descriptors. This is required to allow to query a
consistent state of the virtqueue while live migration is taking place.
Signed-off-by: Eli Cohen <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Introduce helper virtio_find_vqs_ctx_size() to call find_vqs and specify
the maximum size of each vq ring.
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
find_vqs() adds a new parameter sizes to specify the size of each vq
vring.
NULL as sizes means that all queues in find_vqs() use the maximum size.
A value in the array is 0, which means that the corresponding queue uses
the maximum size.
In the split scenario, the meaning of size is the largest size, because
it may be limited by memory, the virtio core will try a smaller size.
And the size is power of 2.
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Introduce new helpers to implement queue reset and get queue reset
status.
https://github.com/oasis-tcs/virtio-spec/issues/124
https://github.com/oasis-tcs/virtio-spec/issues/139
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Add queue_reset in virtio_pci_modern_common_cfg.
https://github.com/oasis-tcs/virtio-spec/issues/124
https://github.com/oasis-tcs/virtio-spec/issues/139
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|