| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
|
|
The commit that added the new get_random_{u8,u16}() functions neglected
to update the code that clears the batches when bringing up a new CPU.
It also forgot a few comments and helper defines, so add those in too.
Fixes: 585cd5fe9f73 ("random: add 8-bit and 16-bit batches")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Allow the caller to force a disconnection of the RPC client so that we
can clear any pending requests that are buffered in the socket.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add the helper rpc_cancel_tasks(), which uses a caller-defined selection
function to define a set of in-flight RPC calls to cancel. This is
mainly intended for pNFS drivers which are subject to a layout recall,
and which may therefore want to cancel all pending I/O using that layout
in order to redrive it after the layout recall has been satisfied.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Ensure that we immediately call rpc_exit_task() after waking up, and
that the tk_rpc_status cannot get clobbered by some other function.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
for_each_cpu_and() is very convenient as it saves having to allocate a
temporary cpumask to store the result of cpumask_and(). The same issue
applies to cpumask_andnot() which doesn't actually need temporary storage
for iteration purposes.
Following what has been done for for_each_cpu_and(), introduce
for_each_cpu_andnot().
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
|
|
In preparation of introducing for_each_cpu_andnot(), add a variant of
find_next_bit() that negate the bits in @addr2 when ANDing them with the
bits in @addr1.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
|
|
Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports
discard, while they actually don't. This might cause mk2fs to fail while
trying to format the card and revert it to a read-only mode.
To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD)
to indicate that we shall fall-back to use the legacy erase command
instead.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes are ASoC drivers (SOF, Intel, AMD, Mediatek,
Qualcomm, TI, Apple Silicon, etc), while we see a few small fixes in
ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual"
* tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (422 commits)
ALSA: hda: Fix position reporting on Poulsbo
ALSA: hda/hdmi: Don't skip notification handling during PM operation
ASoC: rockchip: i2s: use regmap_read_poll_timeout_atomic to poll I2S_CLR
ASoC: dt-bindings: Document audio OF graph dai-tdm-slot-num dai-tdm-slot-width props
ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
ASoC: mediatek: mt8192-mt6359: Set the driver name for the card
ALSA: hda/realtek: More robust component matching for CS35L41
ASoC: Intel: sof_rt5682: remove SOF_RT1015_SPEAKER_AMP_100FS flag
ASoC: nau8825: Add TDM support
ASoC: core: clarify the driver name initialization
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()"
ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select"
ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model
ALSA: asihpi - Remove unused struct hpi_subsys_response
...
|
|
Pull drm updates from Dave Airlie:
"Lots of stuff all over, some new AMD IP support and gang submit
support. i915 has further DG2 and Meteorlake pieces, and a bunch of
i915 display refactoring. msm has a shrinker rework. There are also a
bunch of conversions to use kunit.
This has two external pieces, some MEI changes needed for future Intel
discrete GPUs. These should be acked by Greg. There is also a cross
maintainer shared tree with some backlight rework from Hans in here.
Core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU:
simplified VBIF configuration
cleanup CTL interfaces
- DSI:
removed unused msm_display_dsc_config struct
switch regulator calls to new API
switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduce lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- improve error and edge conditions handling
- convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support"
* tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits)
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdkfd: Track unified memory when switching xnack mode
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
drm/msm: Fix build break with recent mm tree
drm/panel: simple: Use dev_err_probe() to simplify code
drm/panel: panel-edp: Use dev_err_probe() to simplify code
drm/panel: simple: Add Multi-Inno Technology MI0800FT-9
dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel
drm/amdgpu: correct the memcpy size for ip discovery firmware
drm/amdgpu: Skip put_reset_domain if it doesn't exist
drm/amdgpu: remove switch from amdgpu_gmc_noretry_set
drm/amdgpu: Fix mc_umc_status used uninitialized warning
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/amdgpu: add page retirement handling for CPU RAS
drm/amdgpu: use RAS error address convert api in mca notifier
drm/amdgpu: support to convert dedicated umc mca address
drm/amdgpu: export umc error address convert interface
drm/amdgpu: fix sdma v4 init microcode error
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec_proto:
- Fix protocol failure if EC firmware jumps to RO part
cros_typec_switch:
- Add USB Type-C switch driver for mode switches and retimers
- Integrate to EC for retimers, status update, and mode switches
- Clean-ups
cros_ec_typec:
- Clean-ups
- Use partner PDOs to register USB PD capabilities
chromeos_laptop:
- Fix a double-free
cros_ec_chardev:
- Check data length from userland to avoid a memory corruption
cros_ec:
- Expose suspend_timeout_ms in debugfs
- Notify the PM about wake events during resume"
* tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Notify the PM of wake events during resume
platform/chrome: cros_ec_typec: Register partner PDOs
platform/chrome: cros_typec_switch: Inline DRV_NAME
platform/chrome: cros_typec_switch: Use PTR_ERR_OR_ZERO() to simplify
platform/chrome: cros_typec_switch: Remove impossible condition
platform/chrome: cros_typec_switch: Add missing newline on printk
platform/chrome: cros_ec_typec: Correct alt mode index
platform/chrome: cros_ec_typec: Add bit offset for DP VDO
platform/chrome: cros_ec: Expose suspend_timeout_ms in debugfs
platform/chrome: fix memory corruption in ioctl
platform/chrome: fix double-free in chromeos_laptop_prepare()
platform/chrome: cros_ec_typec: Get retimer handle
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_typec_switch: Register mode switches
platform/chrome: cros_typec_switch: Add event check
platform/chrome: cros_typec_switch: Set EC retimer
platform/chrome: cros_typec_switch: Add switch driver
platform/chrome: Add Type-C mux set command definitions
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
|
|
Expose struct amd_cpudata to AMD P-State unit test module.
This data struct will be used on the following AMD P-State unit test
(amd-pstate-ut) module. The amd-pstate-ut module can get some
AMD infomations by this data struct. For example: highest perf,
nominal perf, boost supported etc.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Pull MMC updates from Ulf Hansson:
- dt-bindings: Increase maximum supported frequency to 384MHz
- dw_mmc-rockchip: Add support for the rk3128 variant
- meson-gx: Add support for SDIO interrupts
- mtk-sd: Add support for MT6795 Helio X10 variant
- sdhci: Improve the code by centralizing the CMD/DATA reset handling
- sdhci-msm:
- Add support for the sdm670 variant
- Add support for the sm6115 variant
- sdhci-omap: Make Vignesh replace Kishon as the maintainer
- sdhci-pci-o2micro: Disable fragile support for DDR50 in favor of
SDR50
- sdhci-sprd: Fix clock divider limitation
* tag 'mmc-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (31 commits)
mmc: sdhci: Centralize CMD and DATA reset handling
mmc: sdhci: Get rid of SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS
mmc: sdhci: Remove misleading comment about resets
mmc: sdhci: Separate out sdhci_reset_for_all()
MAINTAINERS: Add Vignesh as maintainer of TI SDHCI OMAP DRIVER
mmc: sdhci-msm: add compatible string check for sdm670
dt-bindings: mmc: sdhci-msm: add sdm670 compatible
mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
mmc: rtsx_usb_sdmmc: Remove the unneeded result variable
mmc: sdhci-of-aspeed: Add dependency on ARCH_ASPEED
mmc: mtk-sd: Add support for MT6795 Helio X10
mmc: mtk-sd: Reorder of_device_id and platform data by name
mmc: sdhci-sprd: Fix the limitation of div
dt-bindings: mmc: sdhci-msm: Add pinctrl-1 property
dt-bindings: mmc: rockchip: add rockchip,rk3128-dw-mshc
dt-bindings: mmc: renesas,sdhi: Add iommus property
mmc: sdhci_am654: Remove the unneeded result variable
mmc: meson-gx: add SDIO interrupt support
mmc: meson-gx: adjust and re-use constant IRQ_EN_MASK
mmc: jz4740_mmc: Fix error check for dma_map_sg
...
|
|
- Add hanlding of all Bluetooth HID++ devices and fixes in hid++
(Bastien Nocera)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"With the exception of some refactoring to fix long standing issues
where we weren't handling cache syncs properly for messages which had
PIO and DMA transfers going to the same page correctly there has been
no work on the core this time around, and it's also been quite a quiet
release for the drivers too:
- Fix cache syncs for cases where we have DMA and PIO transfers in
the same message going to the same page
- Update the fsl_spi driver to use transfer_one() rather than a
custom transfer function
- Support for configuring transfer speeds with the AMD SPI controller
- Support for a second chip select and 64K erase on Intel SPI
- Support for Microchip coreQSPI, Nuvoton NPCM845, NXP i.MX93, and
Rockchip RK3128 and RK3588"
* tag 'spi-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (73 commits)
spi: Ensure that sg_table won't be used after being freed
spi: spi-gxp: Use devm_platform_ioremap_resource()
spi: s3c64xx: Fix large transfers with DMA
spi: Split transfers larger than max size
spi: Fix cache corruption due to DMA/PIO overlap
spi: Save current RX and TX DMA devices
spi: mt65xx: Add dma max segment size declaration
spi: migrate mt7621 text bindings to YAML
spi: renesas,sh-msiof: Add r8a779g0 support
spi: spi-fsl-qspi: Use devm_platform_ioremap_resource_byname()
spi: spi-fsl-lpspi: Use devm_platform_get_and_ioremap_resource()
spi: spi-fsl-dspi: Use devm_platform_get_and_ioremap_resource()
spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe
spi: cadence-quadspi: Fix PM disable depth imbalance in cqspi_probe
spi: s3c24xx: Switch to use devm_spi_alloc_master()
spi: xilinx: Switch to use devm_spi_alloc_master()
spi: img-spfi: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
spi: aspeed: Remove redundant dev_err call
spi: spi-mpc52xx: switch to using gpiod API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The core work this time around has mostly been around the code to
manage regulator modes, simplifying the interface for configuring
modes to not take account of the voltage and as a side effect
resolving a bootstrapping issue on systems where we can't read the
voltage from the regulator.
Otherwise it's been quite a quiet release with some new drivers and a
devm helper:
- Make the load handling in the Qualcomm RPMH regulators much more
idiomatic and general cleanups to the handling of load
configuration
- devm helper for a combined get and enable operation
- Support for MediaTek MT6331, Qualcomm PM660, 660L and PM6125, Texas
Instruments TPS65219"
* tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
dt-bindings: gpio-regulator: add vin-supply property support
regulator: gpio: Add input_supply support in gpio_regulator_config
regulator: tps65219: Fix is_enabled checking in tps65219_set_bypass
regulator: qcom,rpmh: add pm660 and pm660l pmics
regulator: qcom-rpmh: add pm660 and pm660l pmics
regulator: of: Fix kernel-doc
regulator: of: Fix kernel-doc
regulator: Add driver for MT6332 PMIC regulators
regulator: Add bindings for MT6332 regulator
regulator: Add driver for MT6331 PMIC regulators
regulator: Add bindings for MT6331 regulator
regulator: tps65219: Fix .bypass_val_on setting
regulator: qcom_rpm: Fix circular deferral regression
regulator: core: Prevent integer underflow
regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies
regulator: bd9576: switch to using devm_fwnode_gpiod_get()
regulator: bd71815: switch to using devm_fwnode_gpiod_get()
regulator: core: Fix regulator supply registration with sysfs
regulator: tps65219: change tps65219_regulator_irq_types to static
regulator: core: Don't err if allow-set-load but no allowed-modes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been a busy release for regmap with one thing and other,
there's been an especially large interest in MMIO regmaps for some
reason. The bulk of the changes are cleanups but there are several
user visible changes too:
- Support for I/O ports in regmap-mmio
- Support for accelerated noinc operations in regmap-mmio
- Support for tracing the register values in bulk operations"
* tag 'regmap-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: mmio: replace return 0 with break in switch statement
regmap: spi-avmm: Use swabXX_array() helpers
regmap: mmio: Use swabXX_array() helpers
swab: Add array operations
regmap: trace: Remove unneeded blank lines
regmap: trace: Remove explicit castings
regmap: trace: Remove useless check for NULL for bulk ops
regmap: mmio: Fix rebase error
regmap: check right noinc bounds in debug print
regmap: introduce value tracing for regmap bulk operations
regmap/hexagon: Properly fix the generic IO helpers
regmap: mmio: Support accelerared noinc operations
regmap: Support accelerated noinc operations
regmap: Make use of get_unaligned_be24(), put_unaligned_be24()
regmap: mmio: Fix MMIO accessors to avoid talking to IO port
regmap: mmio: Introduce IO accessors that can talk to IO port
regmap: mmio: Get rid of broken 64-bit IO
regmap: mmio: Remove mmio_relaxed member from context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for MAX31760 fan speed controller
- Driver for TEXAS TPS546D24 Buck Converter
- Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller
Removed drivers:
- Drop obsolete asus_wmi_ec_sensors driver
Cleanups, affecting various drivers:
- Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate
- Remove forward declarations
- Move from strlcpy with unused retval to strscpy
- Make use of devm_clk_get_enabled()
- Drop devm_of_pwm_get()
Other notable cleanup and improvements:
- Support for additional USB devide ID and support for reporting of
rail mode via debugfs added to corsair-psu driver
- Support for aditional USB ID in nzxt-smart2 driver
- Support for Aquacomputer High Flow Next in aquacomputer_d5next
driver
- Major cleanup of pwm-fan driver
- Major cleanup of mr75203 driver, and added support for new device
revision
And various other minor fixes and cleanups"
* tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu
hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar
hwmon: (nct6683) remove unused variable in nct6683_create_attr_group
hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations
hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
|
This patch supports to record detail reason of FSCORRUPTED error into
f2fs_super_block.s_errors[].
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch supports to record stop_checkpoint error into
f2fs_super_block.s_stop_reason[].
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Update the _EXPORT_DEV_PM_OPS() internal macro. It was not used anywhere
outside pm.h and pm_runtime.h, so it is safe to update it.
Before, this macro would take a few parameters to be used as sleep and
runtime callbacks. This made it unsuitable to use with different
callbacks, for instance the "noirq" ones.
It is now semantically different: instead of creating a conditionally
exported dev_pm_ops structure, it only contains part of the definition.
This macro should however never be used directly (hence the trailing
underscore). Instead, the following four macros are provided:
- EXPORT_DEV_PM_OPS(name)
- EXPORT_GPL_DEV_PM_OPS(name)
- EXPORT_NS_DEV_PM_OPS(name, ns)
- EXPORT_NS_GPL_DEV_PM_OPS(name, ns)
For instance, it is now possible to conditionally export noirq
suspend/resume PM functions like this:
EXPORT_GPL_DEV_PM_OPS(foo_pm_ops) = {
NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
};
The existing helper macros EXPORT_*_SIMPLE_DEV_PM_OPS() and
EXPORT_*_RUNTIME_DEV_PM_OPS() have been updated to use these new macros.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Many of the mdev drivers use a simple counter for keeping track of the
available instances. Move this code to the core code and store the counter
in the mdev_parent. Implement it using correct locking, fixing mdpy.
Drivers just provide the value in the mdev_driver at registration time
and the core code takes care of maintaining it and exposing the value in
sysfs.
[hch: count instances per-parent instead of per-type, use an atomic_t
to avoid taking mdev_list_lock in the show method]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-15-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a string, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Remove the now unused types_attrs field in struct mdev_driver and the
support code for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-14-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just print a number, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-13-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a static string, simply add a field to the
mdev_type for the driver to fill out or fall back to the sysfs name and
provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-12-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a static string, simply feed it through the ops
and provide a standard sysfs show function.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-10-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-9-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
mdev_bus_type is only used in mdev.ko now, so unexport it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-8-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just open code it in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-7-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Instead of abusing struct attribute_group to control initialization of
struct mdev_type, just define the actual attributes in the mdev_driver,
allocate the mdev_type structures in the caller and pass them to
mdev_register_parent.
This allows the caller to use container_of to get at the containing
structure and thus significantly simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-6-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Simplify mdev_{un}register_device by requiring the caller to pass in
a structure allocate as part of the parent device structure. This
removes the need for a list of parents and the separate mdev_parent
refcount as we can simplify rely on the reference to the parent device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-5-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Include <linux/device.h> and <linux/uuid.h> so that users of this headers
don't need to do that and remove those includes that aren't needed
any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-4-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
into clk-next
- More devm helpers for fixed rate registration
- Add Spreadtrum UMS512 SoC clk support
- Various PXA168 clk driver fixes
* clk-fixed-rate:
clk: fixed-rate: add devm_clk_hw_register_fixed_rate
clk: asm9260: use parent index to link the reference clock
* clk-spreadtrum:
clk: sprd: Add clocks support for UMS512
* clk-pxa:
clk: pxa: add a check for the return value of kzalloc()
clk: mmp: pxa168: control shared SDH bits with separate clock
dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks
clk: mmp: pxa168: add clocks for SDH2 and SDH3
dt-bindings: marvell,pxa168: add clock id for SDH3
clk: mmp: pxa168: fix GPIO clock enable bits
clk: mmp: pxa168: add muxes for more peripherals
clk: mmp: pxa168: fix incorrect parent clocks
clk: mmp: pxa168: fix const-correctness
clk: mmp: pxa168: add new clocks for peripherals
dt-bindings: marvell,pxa168: add clock ids for additional dividers
clk: mmp: pxa168: fix incorrect dividers
clk: mmp: pxa168: add additional register defines
* clk-ti:
clk: davinci: cfgchip: Use dev_err_probe() helper
clk: davinci: pll: fix spelling typo in comment
MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER
|
|
into clk-next
- Add resets for MediaTek MT8195 PCIe and USB
- Remove DaVinci DM644x and DM646x clk driver support
* clk-samsung:
clk: samsung: MAINTAINERS: add Krzysztof Kozlowski
clk: samsung: exynos850: Implement CMU_MFCMSCL domain
clk: samsung: exynos850: Implement CMU_IS domain
clk: samsung: exynos850: Implement CMU_AUD domain
clk: samsung: exynos850: Style fixes
clk: samsung: exynosautov9: add fsys1 clock support
clk: samsung: exynosautov9: add fsys0 clock support
clk: samsung: exynosautov9: correct register offsets of peric0/c1
clk: samsung: exynosautov9: add missing gate clks for peric0/c1
dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL
dt-bindings: clock: exynos850: Add Exynos850 CMU_IS
dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD
dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1
dt-bindings: clock: exynosautov9: add fsys1 clock definitions
dt-bindings: clock: exynosautov9: add fys0 clock definitions
clk: samsung: exynos7885: Add TREX clocks
clk: samsung: exynos7885: Implement CMU_FSYS domain
dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1
clk: samsung: exynos-clkout: Use of_device_get_match_data()
* clk-mtk: (42 commits)
clk: mediatek: add driver for MT8365 SoC
clk: mediatek: Export required common code symbols
clk: mediatek: Provide mtk_devm_alloc_clk_data
dt-bindings: clock: mediatek: add bindings for MT8365 SoC
clk: mediatek: mt8192: deduplicate parent clock lists
clk: mediatek: Migrate remaining clk_unregister_*() to clk_hw_unregister_*()
clk: mediatek: fix unregister function in mtk_clk_register_dividers cleanup
clk: mediatek: clk-mt8192: Add clock mux notifier for mfg_pll_sel
clk: mediatek: clk-mt8192-mfg: Propagate rate changes to parent
clk: mediatek: clk-mt8195-topckgen: Drop univplls from mfg mux parents
clk: mediatek: clk-mt8195-topckgen: Add GPU clock mux notifier
clk: mediatek: clk-mt8195-topckgen: Register mfg_ck_fast_ref as generic mux
clk: mediatek: clk-mt8195-mfg: Reparent mfg_bg3d and propagate rate changes
clk: mediatek: mt8183: Add clk mux notifier for MFG mux
clk: mediatek: mux: add clk notifier functions
clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent
clk: mediatek: Use mtk_clk_register_gates_with_dev in simple probe
clk: mediatek: gate: Export mtk_clk_register_gates_with_dev
clk: mediatek: add VDOSYS1 clock
dt-bindings: clk: mediatek: Add MT8195 DPI clocks
...
* clk-rm:
clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646x
* clk-ast:
clk: ast2600: BCLK comes from EPLL
* clk-qcom: (97 commits)
clk: qcom: gcc-sm6375: Ensure unsigned long type
clk: qcom: gcc-sm6375: Remove unused variables
clk: qcom: kpss-xcc: convert to parent data API
clk: introduce (devm_)hw_register_mux_parent_data_table API
clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8939: use parent_hws where possible
dt-bindings: clock: move qcom,gcc-msm8939 to qcom,gcc-msm8916.yaml
clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs
clk: qcom: gcc-sc8280xp: use retention for USB power domains
clk: qcom: gdsc: add missing error handling
dt-bindings: clocks: qcom,gcc-sc8280xp: Fix typos
clk: qcom: Add global clock controller driver for SM6375
dt-bindings: clock: add SM6375 QCOM global clock bindings
clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit
clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs
clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc
clk: qcom: gdsc: Fix the handling of PWRSTS_RET support
clk: qcom: Add SC8280XP GPU clock controller
dt-bindings: clock: Add Qualcomm SC8280XP GPU binding
clk: qcom: smd: Add SM6375 clocks
...
|
|
'clk-xilinx' into clk-next
- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging
* clk-ofnode:
clk: ti: Balance of_node_get() calls for of_find_node_by_name()
clk: tegra20: Fix refcount leak in tegra20_clock_init
clk: tegra: Fix refcount leak in tegra114_clock_init
clk: tegra: Fix refcount leak in tegra210_clock_init
clk: sprd: Hold reference returned by of_get_parent()
clk: berlin: Add of_node_put() for of_get_parent()
clk: at91: dt-compat: Hold reference returned by of_get_parent()
clk: qoriq: Hold reference returned by of_get_parent()
clk: oxnas: Hold reference returned by of_get_parent()
clk: st: Hold reference returned by of_get_parent()
clk: tegra: Add missing of_node_put()
clk: meson: Hold reference returned by of_get_parent()
clk: nomadik: Add missing of_node_put()
* clk-bindings:
dt-bindings: clock: drop minItems equal to maxItems
dt-bindings: clock: gpio-gate-clock: Convert to json-schema
dt-bindings: clock: Move versaclock.h to dt-bindings/clock
dt-bindings: clock: Move lochnagar.h to dt-bindings/clock
* clk-cleanup:
clk: allow building lan966x as a module
clk: clk-xgene: simplify if-if to if-else
clk: nxp: fix typo in comment
clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clkdev: Simplify devm_clk_hw_register_clkdev() function
clkdev: Remove never used devm_clk_release_clkdev()
clk: Remove never used devm_of_clk_del_provider()
clk: pistachio: Fix initconst confusion
clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data
clk: do not initialize ret
clk: remove extra empty line
clk: Fix comment typo
clk: move from strlcpy with unused retval to strscpy
* clk-zynq:
clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
clk: zynqmp: Check the return type zynqmp_pm_query_data
clk: zynqmp: Add a check for NULL pointer
clk: zynqmp: Replaced strncpy() with strscpy()
clk: zynqmp: Fix stack-out-of-bounds in strncpy`
clk: zynqmp: make bestdiv unsigned
* clk-xilinx:
clk: clocking-wizard: Depend on HAS_IOMEM
clk: clocking-wizard: Use dev_err_probe() helper
clk: clocking-wizard: Update the compatible
clk: clocking-wizard: Fix the reconfig for 5.2
clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs
clk: clocking-wizard: Move clocking-wizard out
dt-bindings: add documentation of xilinx clocking wizard
|
|
ceph_msg_data_next is always passed a NULL pointer for this field. Some
of the "next" operations look at it in order to determine the length,
but we can just take the min of the data on the page or cursor->resid.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- More work by James Morse to disentangle the resctrl filesystem
generic code from the architectural one with the endgoal of plugging
ARM's MPAM implementation into it too so that the user interface
remains the same
- Properly restore the MSR_MISC_FEATURE_CONTROL value instead of
blindly overwriting it to 0
* tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes
x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data
x86/resctrl: Rename and change the units of resctrl_cqm_threshold
x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()
x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read()
x86/resctrl: Abstract __rmid_read()
x86/resctrl: Allow per-rmid arch private storage to be reset
x86/resctrl: Add per-rmid arch private storage for overflow and chunks
x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks
x86/resctrl: Allow update_mba_bw() to update controls directly
x86/resctrl: Remove architecture copy of mbps_val
x86/resctrl: Switch over to the resctrl mbps_val list
x86/resctrl: Create mba_sc configuration in the rdt_domain
x86/resctrl: Abstract and use supports_mba_mbps()
x86/resctrl: Remove set_mba_sc()s control array re-initialisation
x86/resctrl: Add domain offline callback for resctrl work
x86/resctrl: Group struct rdt_hw_domain cleanup
x86/resctrl: Add domain online callback for resctrl work
x86/resctrl: Merge mon_capable and mon_enabled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core fixes from Borislav Petkov:
- Make sure an INT3 is slapped after every unconditional retpoline JMP
as both vendors suggest
- Clean up pciserial a bit
* tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,retpoline: Be sure to emit INT3 after JMP *%\reg
x86/earlyprintk: Clean up pciserial
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for Skylake-S CPUs to ie31200_edac
- Improve error decoding speed of the Intel drivers by avoiding the
ACPI facilities but doing decoding in the driver itself
- Other misc improvements to the Intel drivers
- The usual cleanups and fixlets all over EDAC land
* tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i7300: Correct the i7300_exit() function name in comment
x86/sb_edac: Add row column translation for Broadwell
EDAC/i10nm: Print an extra register set of retry_rd_err_log
EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM
EDAC/skx_common: Add ChipSelect ADXL component
EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations
EDAC: Remove obsolete declarations in edac_module.h
EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs
EDAC/skx_common: Make output format similar
EDAC/skx_common: Use driver decoder first
EDAC/mc: Drop duplicated dimm->nr_pages debug printout
EDAC/mc: Replace spaces with tabs in memtype flags definition
EDAC/wq: Remove unneeded flush_workqueue()
EDAC/ie31200: Add Skylake-S support
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control fixes for 6.1-rc1 from Daniel Lezcano:
"- Used the platform data to get the sensor id instead of parsing the
device in the driver and remove the dedicated OF function (Daniel
Lezcano)
- Fixed Kconfig dependency for the QCom tsens driver (Jonathan Cameron)
- Fixed missing const annotation for the RCar ops driver and removed a
duplicate parameter check (Lad Prabhakar)
- Fixed a NULL pointer dereference when calling set_trip_temp() (Lad
Prabhakar)
- Fixed the fourth hardware id in the QCom tsens driver (Vincent
Knecht)"
* tag 'thermal-v6.1-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
thermal/core: Add a check before calling set_trip_temp()
thermal/core: Drop valid pointer check for type
thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
thermal/of: Remove the thermal_zone_of_get_sensor_id() function
thermal/drivers/imx_sc: Rely on the platform data to get the resource id
|
|
If CONFIG_IO_URING is not set:
include/linux/io_uring.h:65:12: error: ‘io_uring_cmd_import_fixed’ defined but not used [-Werror=unused-function]
65 | static int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by adding the missing "inline" keyword.
Fixes: a9216fac3ed8819c ("io_uring: add io_uring_cmd_import_fixed")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7404b4a696f64e33e5ef3c5bd3754d4f26d13e50.1664887093.git.geert+renesas@glider.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before
a system restart.
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
ACPI IRQ/Interrupt resources contain a bit that describes if the
interrupt should wake the system. This change exposes that bit via
a new IORESOURCE_IRQ_WAKECAPABLE flag. Drivers should check this flag
before arming an IRQ to wake the system.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI spec defines the SharedAndWake and ExclusiveAndWake share type
keywords. This is an indication that the GPIO IRQ can also be used as a
wake source. This change exposes the wake_capable bit so drivers can
correctly enable wake functionality instead of making an assumption.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
I'm a flamin' moron; because even after Mark told me it should be '&&'
I still got it wrong in the final commit.
Fixes: f3c0eba28704 ("perf: Add a few assertions")
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/YvvIWmDBWdIUCMZj@FVFF77S0Q05N
|