| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The patch ("mm/folio: Avoid special handling for order value 0 in
folio_set_order") [1] removed the need for special handling of order = 0
in folio_set_order. Now, folio_set_order and set_compound_order becomes
similar function. This patch removes the set_compound_order and uses
folio_set_order instead.
[1] https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Tarun Sahu <[email protected]>
Reviewed-by Sidhartha Kumar <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mike Kravetz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Now that all three zswap backends have removed their shrink code, it is
no longer necessary for the zpool interface to include shrink/writeback
endpoints.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Domenico Cerasuolo <[email protected]>
Reviewed-by: Yosry Ahmed <[email protected]>
Acked-by: Nhat Pham <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Seth Jennings <[email protected]>
Cc: Vitaly Wool <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Ryan Roberts <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alex Williamson <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Dimitri Sivanich <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Oleksandr Tyshchenko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Uladzislau Rezki (Sony) <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Yu Zhao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There are many call sites that directly dereference a pte_t pointer. This
makes it very difficult to properly encapsulate a page table in the arch
code without having to allocate shadow page tables.
We will shortly solve this by replacing all the call sites with ptep_get()
calls. But there are call sites above the function definition in the
header file, so let's move ptep_get() to an earlier location to solve that
problem. And move pmdp_get() at the same time to keep it close to
ptep_get().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryan Roberts <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alex Williamson <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Dimitri Sivanich <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: kernel test robot <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Oleksandr Tyshchenko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Uladzislau Rezki (Sony) <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Yu Zhao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Similarly to the direct DMA, bounce small allocations as they may have
originated from a kmalloc() cache not safe for DMA. Unlike the direct
DMA, iommu_dma_map_sg() cannot call iommu_dma_map_sg_swiotlb() for all
non-coherent devices as this would break some cases where the iova is
expected to be contiguous (dmabuf). Instead, scan the scatterlist for
any small sizes and only go the swiotlb path if any element of the list
needs bouncing (note that iommu_dma_map_page() would still only bounce
those buffers which are not DMA-aligned).
To avoid scanning the scatterlist on the 'sync' operations, introduce an
SG_DMA_SWIOTLB flag set by iommu_dma_map_sg_swiotlb(). The
dev_use_swiotlb() function together with the newly added
dev_use_sg_swiotlb() now check for both untrusted devices and unaligned
kmalloc() buffers (suggested by Robin Murphy).
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Tested-by: Isaac J. Manjarres <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Alasdair Kergon <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Jerry Snitselaar <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Logan Gunthorpe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Saravana Kannan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
For direct DMA, if the size is small enough to have originated from a
kmalloc() cache below ARCH_DMA_MINALIGN, check its alignment against
dma_get_cache_alignment() and bounce if necessary. For larger sizes, it
is the responsibility of the DMA API caller to ensure proper alignment.
At this point, the kmalloc() caches are properly aligned but this will
change in a subsequent patch.
Architectures can opt in by selecting DMA_BOUNCE_UNALIGNED_KMALLOC.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Tested-by: Isaac J. Manjarres <[email protected]>
Cc: Alasdair Kergon <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Jerry Snitselaar <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Logan Gunthorpe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Saravana Kannan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
sg_is_dma_bus_address() is inconsistent with the naming pattern of its
corresponding setters and its own kerneldoc, so take the majority vote and
rename it sg_dma_is_bus_address() (and fix up the missing underscores in
the kerneldoc too). This gives us a nice clear pattern where SG DMA flags
are SG_DMA_<NAME>, and the helpers for acting on them are
sg_dma_<action>_<name>().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/fa2eca2862c7ffc41b50337abffb2dfd2864d3ea.1685036694.git.robin.murphy@arm.com
Tested-by: Isaac J. Manjarres <[email protected]>
Cc: Alasdair Kergon <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Saravana Kannan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The DMA flags field will be useful for users beyond PCI P2P, so upgrade to
its own dedicated config option.
[[email protected]: use #ifdef CONFIG_NEED_SG_DMA_FLAGS in scatterlist.h]
[[email protected]: update PCI_P2PDMA dma_flags comment in scatterlist.h]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Tested-by: Isaac J. Manjarres <[email protected]>
Cc: Alasdair Kergon <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Jerry Snitselaar <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Logan Gunthorpe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Saravana Kannan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA
operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects
alignment.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Tested-by: Isaac J. Manjarres <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Alasdair Kergon <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Jerry Snitselaar <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Logan Gunthorpe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Saravana Kannan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
On arm64, ARCH_DMA_MINALIGN is larger than most cache line size
configurations deployed. Allow an architecture to override
dma_get_cache_alignment() in order to return a run-time probed value (e.g.
cache_line_size()).
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Tested-by: Isaac J. Manjarres <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Alasdair Kergon <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Jerry Snitselaar <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Logan Gunthorpe <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Saravana Kannan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm, dma, arm64: Reduce ARCH_KMALLOC_MINALIGN to 8", v7.
A series reducing the kmalloc() minimum alignment on arm64 to 8 (from
128).
This patch (of 17):
In preparation for supporting a kmalloc() minimum alignment smaller than
the arch DMA alignment, decouple the two definitions. This requires that
either the kmalloc() caches are aligned to a (run-time) cache-line size or
the DMA API bounces unaligned kmalloc() allocations. Subsequent patches
will implement both options.
After this patch, ARCH_DMA_MINALIGN is expected to be used in static
alignment annotations and defined by an architecture to be the maximum
alignment for all supported configurations/SoCs in a single Image.
Architectures opting in to a smaller ARCH_KMALLOC_MINALIGN will need to
define its value in the arch headers.
Since ARCH_DMA_MINALIGN is now always defined, adjust the #ifdef in
dma_get_cache_alignment() so that there is no change for architectures not
requiring a minimum DMA alignment.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Tested-by: Isaac J. Manjarres <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Alasdair Kergon <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Saravana Kannan <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Jerry Snitselaar <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Logan Gunthorpe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
All users can use the folio equivalent so this function can be safely
removed.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sidhartha Kumar <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Tarun Sahu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
swap_vma_readahead() has been proceeding in an unconventional way, its
preliminary swap_ra_info() doing the pte_offset_map() and pte_unmap(),
then relying on that pte pointer even after the pte_unmap() - in its
CONFIG_64BIT case (I think !CONFIG_HIGHPTE was intended; whereas 32-bit
copied ptes to stack while they were mapped, but had to limit how many).
Though it would be difficult to construct a failing testcase, accessing
page table after pte_unmap() will become bad practice, even on 64-bit: an
rcu_read_unlock() in pte_unmap() will allow page table to be freed.
Move relevant definitions from include/linux/swap.h to mm/swap_state.c,
nothing else used them. Delete the CONFIG_64BIT distinction and buffer,
delete all reference to ptes from swap_ra_info(), use pte_offset_map()
repeatedly in swap_vma_readahead(), breaking from the loop if it fails.
(Will the repeated "map" and "unmap" show up as a slowdown anywhere? If
so, maybe modify __read_swap_cache_async() to do the pte_unmap() only when
it does not find the page already in the swapcache.)
Use ptep_get_lockless(), mainly for its READ_ONCE(). Correctly advance
the address passed down to each call of __read__swap_cache_async().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: "Huang, Ying" <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Steven Price <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yu Zhao <[email protected]>
Cc: Zack Rusin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Delete pmd_trans_unstable, pmd_none_or_trans_huge_or_clear_bad() and
pmd_devmap_trans_unstable(), all now unused.
With mixed feelings, delete all the comments on pmd_trans_unstable().
That was very good documentation of a subtle state, and this series does
not even eliminate that state: but rather, normalizes and extends it,
asking pte_offset_map[_lock]() callers to anticipate failure, without
regard for whether mmap_read_lock() or mmap_write_lock() is held.
Retain pud_trans_unstable(), which has one use in __handle_mm_fault(), but
delete its equivalent pud_none_or_trans_huge_or_dev_or_clear_bad(). While
there, move the default arch_needs_pgtable_deposit() definition up near
where pgtable_trans_huge_deposit() and withdraw() are declared.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Steven Price <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yu Zhao <[email protected]>
Cc: Zack Rusin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Make pte_offset_map() a wrapper for __pte_offset_map() (optionally outputs
pmdval), pte_offset_map_lock() a sparse __cond_lock wrapper for
__pte_offset_map_lock(): those __funcs added in mm/pgtable-generic.c.
__pte_offset_map() do pmdval validation (including pmd_clear_bad() when
pmd_bad()), returning NULL if pmdval is not for a page table.
__pte_offset_map_lock() verify pmdval unchanged after getting the lock,
trying again if it changed.
No #ifdef CONFIG_TRANSPARENT_HUGEPAGE around them: that could be done to
cover the imminent case, but we expect to generalize it later, and it
makes a mess of where to do the pmd_bad() clearing.
Add pte_offset_map_nolock(): outputs ptl like pte_offset_map_lock(),
without actually taking the lock. This will be preferred to open uses of
pte_lockptr(), because (when split ptlock is in page table's struct page)
it points to the right lock for the returned pte pointer, even if *pmd
gets changed racily afterwards.
Update corresponding Documentation.
Do not add the anticipated rcu_read_lock() and rcu_read_unlock()s yet:
they have to wait until all architectures are balancing pte_offset_map()s
with pte_unmap()s (as in the arch series posted earlier). But comment
where they will go, so that it's easy to add them for experiments. And
only when those are in place can transient racy failure cases be enabled.
Add more safety for the PAE mismatched pmd_low pmd_high case at that time.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Steven Price <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yu Zhao <[email protected]>
Cc: Zack Rusin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
pte_offset_map() was still using kmap_atomic(): update it to the preferred
kmap_local_page() before making further changes there, in case we need
this as a bisection point; but I doubt it can cause any trouble.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Steven Price <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yu Zhao <[email protected]>
Cc: Zack Rusin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
migration_entry_wait_on_locked() does not need to take a mapped pte
pointer, its callers can do the unmap first. Annotate it with
__releases(ptl) to reduce sparse warnings.
Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold
__migration_entry_wait() into migration_entry_wait(), preferring the
tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: Alistair Popple <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Steven Price <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yu Zhao <[email protected]>
Cc: Zack Rusin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm: allow pte_offset_map[_lock]() to fail", v2.
What is it all about? Some mmap_lock avoidance i.e. latency reduction.
Initially just for the case of collapsing shmem or file pages to THPs; but
likely to be relied upon later in other contexts e.g. freeing of empty
page tables (but that's not work I'm doing). mmap_write_lock avoidance
when collapsing to anon THPs? Perhaps, but again that's not work I've
done: a quick attempt was not as easy as the shmem/file case.
I would much prefer not to have to make these small but wide-ranging
changes for such a niche case; but failed to find another way, and have
heard that shmem MADV_COLLAPSE's usefulness is being limited by that
mmap_write_lock it currently requires.
These changes (though of course not these exact patches) have been in
Google's data centre kernel for three years now: we do rely upon them.
What is this preparatory series about?
The current mmap locking will not be enough to guard against that tricky
transition between pmd entry pointing to page table, and empty pmd entry,
and pmd entry pointing to huge page: pte_offset_map() will have to
validate the pmd entry for itself, returning NULL if no page table is
there. What to do about that varies: sometimes nearby error handling
indicates just to skip it; but in many cases an ACTION_AGAIN or "goto
again" is appropriate (and if that risks an infinite loop, then there must
have been an oops, or pfn 0 mistaken for page table, before).
Given the likely extension to freeing empty page tables, I have not
limited this set of changes to a THP config; and it has been easier, and
sets a better example, if each site is given appropriate handling: even
where deeper study might prove that failure could only happen if the pmd
table were corrupted.
Several of the patches are, or include, cleanup on the way; and by the
end, pmd_trans_unstable() and suchlike are deleted: pte_offset_map() and
pte_offset_map_lock() then handle those original races and more. Most
uses of pte_lockptr() are deprecated, with pte_offset_map_nolock() taking
its place.
This patch (of 32):
Use pmdp_get_lockless() in preference to READ_ONCE(*pmdp), to get a more
reliable result with PAE (or READ_ONCE as before without PAE); and remove
the unnecessary extra barrier()s which got left behind in its callers.
HOWEVER: Note the small print in linux/pgtable.h, where it was designed
specifically for fast GUP, and depends on interrupts being disabled for
its full guarantee: most callers which have been added (here and before)
do NOT have interrupts disabled, so there is still some need for caution.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Acked-by: Yu Zhao <[email protected]>
Acked-by: Peter Xu <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Steven Price <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Zack Rusin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit 71024cb4a0bf ("frontswap: remove frontswap_tmem_exclusive_gets")
removed support for exclusive loads from frontswap as it was not used.
Bring back exclusive loads support to frontswap by adding an "exclusive"
output parameter to frontswap_ops->load.
On the zswap side, add a module parameter to enable/disable exclusive
loads, and a config option to control the boot default value. Refactor
zswap entry invalidation in zswap_frontswap_invalidate_page() into
zswap_invalidate_entry() to reuse it in zswap_frontswap_load() if
exclusive loads are enabled.
With exclusive loads, we avoid having two copies of the same page in
memory (compressed & uncompressed) after faulting it in from zswap. On
the other hand, if the page is to be reclaimed again without being
dirtied, it will be re-compressed. Compression is not usually slow, and a
page that was just faulted in is less likely to be reclaimed again soon.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yosry Ahmed <[email protected]>
Suggested-by: Yu Zhao <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Domenico Cerasuolo <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Seth Jennings <[email protected]>
Cc: Vitaly Wool <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
managed pages has already been set to 0 in free_area_init_core_hotplug(),
via zone_init_internals() on each zone. It's pointless to reset again.
Furthermore, reset_node_managed_pages() no longer needs to be exposed
outside of mm/memblock.c. Remove declaration in include/linux/memblock.h
and define it as static.
In addtion to this, the only caller of reset_node_managed_pages() is
reset_all_zones_managed_pages(), which is annotated with __init, so it
should be safe to also mark reset_node_managed_pages() as __init.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Haifeng Xu <[email protected]>
Suggested-by: David Hildenbrand <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Oscar Salvador <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
As the ramfs-based tmpfs uses ramfs_init_fs_context() for the
init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb()
to free it and avoid a memory leak.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c3b1b1cbf002 ("ramfs: add support for "mode=" mount option")
Signed-off-by: Roberto Sassu <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: David Howells <[email protected]>
Cc: Al Viro <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
These parameters ms and map_offset are not used in
sparse_remove_section(), so remove them.
The __remove_section() is only called by __remove_pages(), remove it. And
put the WARN_ON_ONCE() in sparse_remove_section().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yajun Deng <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Oscar Salvador <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add __meminit to kswapd_run() and kswapd_stop() to ensure they're default
to __init when memory hotplug is not enabled.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Miaohe Lin <[email protected]>
Acked-by: Yu Zhao <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There's only declaration left in the header file. Remove it.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Miaohe Lin <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
And remove the incorrect header comments.
[[email protected]: s/lower/first/, s/upper/last/, per Mike]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Johannes Weiner <[email protected]>
Cc: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Overlayfs creates the real underlying files with fake f_path, whose
f_inode is on the underlying fs and f_path on overlayfs.
Those real files were open with FMODE_NONOTIFY, because fsnotify code was
not prapared to handle fsnotify hooks on files with fake path correctly
and fanotify would report unexpected event->fd with fake overlayfs path,
when the underlying fs was being watched.
Teach fsnotify to handle events on the real files, and do not set real
files to FMODE_NONOTIFY to allow operations on real file (e.g. open,
access, modify, close) to generate async and permission events.
Because fsnotify does not have notifications on address space
operations, we do not need to worry about ->vm_file not reporting
events to a watched overlayfs when users are accessing a mapped
overlayfs file.
Acked-by: Jan Kara <[email protected]>
Signed-off-by: Amir Goldstein <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Overlayfs uses open_with_fake_path() to allocate internal kernel files,
with a "fake" path - whose f_path is not on the same fs as f_inode.
Allocate a container struct backing_file for those internal files, that
is used to hold the "fake" ovl path along with the real path.
backing_file_real_path() can be used to access the stored real path.
Signed-off-by: Amir Goldstein <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
cachefiles uses kernel_open_tmpfile() to open kernel internal tmpfile
without accounting for nr_files.
cachefiles uses open_with_fake_path() for the same reason without the
need for a fake path.
Fork open_with_fake_path() to kernel_file_open() which only does the
noaccount part and use it in cachefiles.
Signed-off-by: Amir Goldstein <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Overlayfs and cachefiles use vfs_open_tmpfile() to open a tmpfile
without accounting for nr_files.
Rename this helper to kernel_tmpfile_open() to better reflect this
helper is used for kernel internal users.
Signed-off-by: Amir Goldstein <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
L3_OUT and L4_OUT Bit fields range from Bit 0:4 and thus the
mask should be 0x1F instead of 0x0F.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Teresa Remmet <[email protected]>
Reviewed-by: Frieder Schrempf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
It seems there is no driver that requires custom IRQ chip
domain options. Drop the member and respective code.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Up until commit 6a45b0e2589f ("gpiolib: Introduce
gpiochip_irqchip_add_domain()") all irq_domains were allocated
by gpiolib itself and thus gpiolib also takes care of freeing it.
With gpiochip_irqchip_add_domain() a user of gpiolib can associate an
irq_domain with the gpio_chip. This irq_domain is not managed by
gpiolib and therefore must not be freed by gpiolib.
Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Reported-by: Jiawen Wu <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Check that all the NSS in the EHT basic MCS/NSS set
are actually supported, otherwise disable EHT for the
connection.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214436.737827c906c9.I0c11a3cd46ab4dcb774c11a5bbc30aecfb6fce11@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Update the MLE STA reconfig sub-type to 802.11be D3.0
format, which includes the operation update field.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214436.2e1383b31f07.I8055a111c8fcf22e833e60f5587a4d8d21caca5b@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
In ieee80211_mle_sta_prof_size_ok(), the presence
checks aren't ordered by field order, so that's a
bit confusing. Reorder them.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214436.fdbf17320a37.I517cf27fdc3f6e5d6a2615182da47ba4bdf14039@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add support for handling link removal indicated by the
Reconfiguration Multi-Link element.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214436.d8a046dc0c1a.I4dcf794da2a2d9f4e5f63a4b32158075d27c0660@changeid
[use cfg80211_links_removed() API instead]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Make the data access a bit nicer overall by using structs. There is a
small change here to also accept a TBTT information length of eight
bytes as we do not require the 20 MHz PSD information.
This also fixes a bug reading the short SSID on big endian machines.
Signed-off-by: Benjamin Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214436.4c3f8901c1bc.Ic3e94fd6e1bccff7948a252ad3bb87e322690a17@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The TBTT information can have various lengths with different elements
thare are present. Add definitions for the two types that we are
interested in (i.e. the ones that contain the BSSID).
Signed-off-by: Benjamin Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214436.2a6f8766a3ec.Ic962e28492212cc8ee1eb602b8f07a4ea172fc4a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add the definitions necessary to parse the MLD parameters
included in an RNR element.
Signed-off-by: Benjamin Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214436.9999842237c0.I80f00a90cb4e43071432b4158f206c73ba799618@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Default values are defined for the information included in the Medium
Synchronization Delay Information subfield. The spec says to
initialize the values to these defaults and only change them when
included.
Return the default value instead of zero so that the defaults are
used when the field is not included in the association response.
Signed-off-by: Benjamin Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214435.a7725bef3795.I2d3528cf4af021c5b37f97fbe64ae9116ce9bef1@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The helper functions to retrieve the EML capabilities and medium
synchronization delay both assume that the type is correct. Instead of
assuming the length is correct and still checking the type, add a new
helper to check both and don't do any verification.
Signed-off-by: Benjamin Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214435.1b50e7a3b3cf.I9385514d8eb6d6d3c82479a6fa732ef65313e554@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The common information length is found in the first octet of the common
information.
Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230618214435.3c7ed4817338.I42ef706cb827b4dade6e4ffbb6e7f341eaccd398@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Rename it to ieee80211_mle_basic_sta_prof_size_ok() as it
validates the size of the station profile included in
Basic Multi-Link element.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230616094949.9bdfd263974f.I7bebd26894f33716e93cc7da576ef3215e0ba727@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The TBTT information field type must be zero. This is only changed in
the 802.11be draft specification where the value 1 is used to indicate
that only the MLD parameters are included.
Signed-off-by: Benjamin Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230616094949.7865606ffe94.I7ff28afb875d1b4c39acd497df8490a7d3628e3f@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point
set_handle_irq() needs to be called to handle system-wide
interrupts.
For all DT-enabled boards, this call happens down in the
drivers/irqchip subsystem, after locating the target irqchip
driver from the device tree.
We still have a few instances of the boardfiles with machine
descriptors passing a machine-specific .handle_irq() to the
ARM kernel core.
Get rid of this by letting the few remaining machines consistently
call set_handle_irq() from the end of the .init_irq() callback
instead and diet down one member from the machine descriptor.
Cc: Marc Zyngier <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
'core' and 'x86/amd' into next
|
|
The VIA fbdev exposes a custom GPIO chip for its GPIOs, these
are in turn looked up the camera driver using a custom API.
Drop the custom API, provide a look-up table and convert to
GPIO descriptors. Note proper polarity on the RESET line.
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct hdmi_avi_infoframe'
from 68 to 60 bytes.
It saves a few bytes of memory and is more cache-line friendly.
This also reduces the union hdmi_infoframe the same way.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <[email protected]>
|
|
The sys_ni_posix_timers() definition causes a warning when the declaration
is missing, so this needs to be added along with the normal syscalls,
outside of the #ifdef.
kernel/time/posix-stubs.c:26:17: error: no previous prototype for 'sys_ni_posix_timers' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|