aboutsummaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2022-02-28net: phylink: remove phylink_set_pcs()Russell King (Oracle)1-1/+0
As all users of phylink_set_pcs() have now been updated to use the mac_select_pcs() method, it can be removed from the phylink kernel API and its functionality moved into phylink_major_config(). Removing phylink_set_pcs() gives us a single approach for attaching a PCS within phylink. Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-27net: dsa: tag_8021q: rename dsa_8021q_bridge_tx_fwd_offload_vidVladimir Oltean1-1/+1
The dsa_8021q_bridge_tx_fwd_offload_vid is no longer used just for bridge TX forwarding offload, it is the private VLAN reserved for VLAN-unaware bridging in a way that is compatible with FDB isolation. So just rename it dsa_tag_8021q_bridge_vid. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-27net: dsa: tag_8021q: merge RX and TX VLANsVladimir Oltean1-7/+1
In the old Shared VLAN Learning mode of operation that tag_8021q previously used for forwarding, we needed to have distinct concepts for an RX and a TX VLAN. An RX VLAN could be installed on all ports that were members of a given bridge, so that autonomous forwarding could still work, while a TX VLAN was dedicated for precise packet steering, so it just contained the CPU port and one egress port. Now that tag_8021q uses Independent VLAN Learning and imprecise RX/TX all over, those lines have been blurred and we no longer have the need to do precise TX towards a port that is in a bridge. As for standalone ports, it is fine to use the same VLAN ID for both RX and TX. This patch changes the tag_8021q format by shifting the VLAN range it reserves, and halving it. Previously, our DIR bits were encoding the VLAN direction (RX/TX) and were set to either 1 or 2. This meant that tag_8021q reserved 2K VLANs, or 50% of the available range. Change the DIR bits to a hardcoded value of 3 now, which makes tag_8021q reserve only 1K VLANs, and a different range now (the last 1K). This is done so that we leave the old format in place in case we need to return to it. In terms of code, the vid_is_dsa_8021q_rxvlan and vid_is_dsa_8021q_txvlan functions go away. Any vid_is_dsa_8021q is both a TX and an RX VLAN, and they are no longer distinct. For example, felix which did different things for different VLAN types, now needs to handle the RX and the TX logic for the same VLAN. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-27net: dsa: tag_8021q: add support for imprecise RX based on the VBIDVladimir Oltean1-1/+5
The sja1105 switch can't populate the PORT field of the tag_8021q header when sending a frame to the CPU with a non-zero VBID. Similar to dsa_find_designated_bridge_port_by_vid() which performs imprecise RX for VLAN-aware bridges, let's introduce a helper in tag_8021q for performing imprecise RX based on the VLAN that it has allocated for a VLAN-unaware bridge. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-27net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridgingVladimir Oltean1-6/+6
For VLAN-unaware bridging, tag_8021q uses something perhaps a bit too tied with the sja1105 switch: each port uses the same pvid which is also used for standalone operation (a unique one from which the source port and device ID can be retrieved when packets from that port are forwarded to the CPU). Since each port has a unique pvid when performing autonomous forwarding, the switch must be configured for Shared VLAN Learning (SVL) such that the VLAN ID itself is ignored when performing FDB lookups. Without SVL, packets would always be flooded, since FDB lookup in the source port's VLAN would never find any entry. First of all, to make tag_8021q more palatable to switches which might not support Shared VLAN Learning, let's just use a common VLAN for all ports that are under the same bridge. Secondly, using Shared VLAN Learning means that FDB isolation can never be enforced. But if all ports under the same VLAN-unaware bridge share the same VLAN ID, it can. The disadvantage is that the CPU port can no longer perform precise source port identification for these packets. But at least we have a mechanism which has proven to be adequate for that situation: imprecise RX (dsa_find_designated_bridge_port_by_vid), which is what we use for termination on VLAN-aware bridges. The VLAN ID that VLAN-unaware bridges will use with tag_8021q is the same one as we were previously using for imprecise TX (bridge TX forwarding offload). It is already allocated, it is just a matter of using it. Note that because now all ports under the same bridge share the same VLAN, the complexity of performing a tag_8021q bridge join decreases dramatically. We no longer have to install the RX VLAN of a newly joining port into the port membership of the existing bridge ports. The newly joining port just becomes a member of the VLAN corresponding to that bridge, and the other ports are already members of it from when they joined the bridge themselves. So forwarding works properly. This means that we can unhook dsa_tag_8021q_bridge_{join,leave} from the cross-chip notifier level dsa_switch_bridge_{join,leave}. We can put these calls directly into the sja1105 driver. With this new mode of operation, a port controlled by tag_8021q can have two pvids whereas before it could only have one. The pvid for standalone operation is different from the pvid used for VLAN-unaware bridging. This is done, again, so that FDB isolation can be enforced. Let tag_8021q manage this by deleting the standalone pvid when a port joins a bridge, and restoring it when it leaves it. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-27PCI: Add Fungible Vendor ID to pci_ids.hDimitris Michailidis1-0/+2
Cc: Bjorn Helgaas <[email protected]> Cc: [email protected] Signed-off-by: Dimitris Michailidis <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-26net: neigh: use kfree_skb_reason() for __neigh_event_send()Menglong Dong1-0/+5
Replace kfree_skb() used in __neigh_event_send() with kfree_skb_reason(). Following drop reasons are added: SKB_DROP_REASON_NEIGH_FAILED SKB_DROP_REASON_NEIGH_QUEUEFULL SKB_DROP_REASON_NEIGH_DEAD The first two reasons above should be the hot path that skb drops in neighbour subsystem. Reviewed-by: Mengen Sun <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-26net: ip: add skb drop reasons for ip egress pathMenglong Dong1-0/+9
Replace kfree_skb() which is used in the packet egress path of IP layer with kfree_skb_reason(). Functions that are involved include: __ip_queue_xmit() ip_finish_output() ip_mc_finish_output() ip6_output() ip6_finish_output() ip6_finish_output2() Following new drop reasons are introduced: SKB_DROP_REASON_IP_OUTNOROUTES SKB_DROP_REASON_BPF_CGROUP_EGRESS SKB_DROP_REASON_IPV6DISABLED SKB_DROP_REASON_NEIGH_CREATEFAIL Reviewed-by: Mengen Sun <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-5/+6
tools/testing/selftests/net/mptcp/mptcp_join.sh 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") 857898eb4b28 ("selftests: mptcp: add missing join check") 6ef84b1517e0 ("selftests: mptcp: more robust signal race test") https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions") c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information") 09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr") 84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr") efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow") 3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions") Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24Merge tag 'net-5.17-rc6' of ↵Linus Torvalds1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - regressions: - bpf: fix crash due to out of bounds access into reg2btf_ids - mvpp2: always set port pcs ops, avoid null-deref - eth: marvell: fix driver load from initrd - eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC" Current release - new code bugs: - mptcp: fix race in overlapping signal events Previous releases - regressions: - xen-netback: revert hotplug-status changes causing devices to not be configured - dsa: - avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held - fix panic when removing unoffloaded port from bridge - dsa: microchip: fix bridging with more than two member ports Previous releases - always broken: - bpf: - fix crash due to incorrect copy_map_value when both spin lock and timer are present in a single value - fix a bpf_timer initialization issue with clang - do not try bpf_msg_push_data with len 0 - add schedule points in batch ops - nf_tables: - unregister flowtable hooks on netns exit - correct flow offload action array size - fix a couple of memory leaks - vsock: don't check owner in vhost_vsock_stop() while releasing - gso: do not skip outer ip header in case of ipip and net_failover - smc: use a mutex for locking "struct smc_pnettable" - openvswitch: fix setting ipv6 fields causing hw csum failure - mptcp: fix race in incoming ADD_ADDR option processing - sysfs: add check for netdevice being present to speed_show - sched: act_ct: fix flow table lookup after ct clear or switching zones - eth: intel: fixes for SR-IOV forwarding offloads - eth: broadcom: fixes for selftests and error recovery - eth: mellanox: flow steering and SR-IOV forwarding fixes Misc: - make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends not report freed skbs as drops - force inlining of checksum functions in net/checksum.h" * tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: mv643xx_eth: process retval from of_get_mac_address ping: remove pr_err from ping_lookup Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" openvswitch: Fix setting ipv6 fields causing hw csum failure ipv6: prevent a possible race condition with lifetimes net/smc: Use a mutex for locking "struct smc_pnettable" bnx2x: fix driver load from initrd Revert "xen-netback: Check for hotplug-status existence before watching" Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" net/mlx5e: Fix VF min/max rate parameters interchange mistake net/mlx5e: Add missing increment of count net/mlx5e: MPLSoUDP decap, fix check for unsupported matches net/mlx5e: Fix MPLSoUDP encap to use MPLS action information net/mlx5e: Add feature check for set fec counters net/mlx5e: TC, Skip redundant ct clear actions net/mlx5e: TC, Reject rules with forward and drop actions net/mlx5e: TC, Reject rules with drop and modify hdr action net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets net/mlx5e: Fix wrong return value on ioctl EEPROM query failure net/mlx5: Fix possible deadlock on rule deletion ...
2022-02-24Merge tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull block fixes from Jens Axboe: - NVMe pull request: - send H2CData PDUs based on MAXH2CDATA (Varun Prakash) - fix passthrough to namespaces with unsupported features (Christoph Hellwig) - Clear iocb->private at poll completion (Stefano) * tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block: nvme-tcp: send H2CData PDUs based on MAXH2CDATA nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info nvme: don't return an error from nvme_configure_metadata block: clear iocb->private in blkdev_bio_end_io_async()
2022-02-24can: bittiming: mark function arguments and local variables as constMarc Kleine-Budde1-3/+3
This patch marks the arguments of some functions as well as some local variables as constant. Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-02-23ethtool: add support to set/get completion queue event sizeSubbaraya Sundeep1-0/+4
Add support to set completion queue event size via ethtool -G parameter and get it via ethtool -g parameter. ~ # ./ethtool -G eth0 cqe-size 512 ~ # ./ethtool -g eth0 Ring parameters for eth0: Pre-set maximums: RX: 1048576 RX Mini: n/a RX Jumbo: n/a TX: 1048576 Current hardware settings: RX: 256 RX Mini: n/a RX Jumbo: n/a TX: 4096 RX Buf Len: 2048 CQE Size: 128 Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-23Merge tag 'slab-for-5.17-rc6' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fixes from Vlastimil Babka: - Build fix (workaround) for clang. - Fix a /proc/kcore based slabinfo script broken by struct slab changes in 5.17-rc1. * tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: tools/cgroup/slabinfo: update to work with struct slab slab: remove __alloc_size attribute from __kmalloc_track_caller
2022-02-23nvme-tcp: send H2CData PDUs based on MAXH2CDATAVarun Prakash1-0/+1
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3) Maximum Host to Controller Data length (MAXH2CDATA): Specifies the maximum number of PDU-Data bytes per H2CData PDU in bytes. This value is a multiple of dwords and should be no less than 4,096. Current code sets H2CData PDU data_length to r2t_length, it does not check MAXH2CDATA value. Fix this by setting H2CData PDU data_length to min(req->h2cdata_left, queue->maxh2cdata). Also validate MAXH2CDATA value returned by target in ICResp PDU, if it is not a multiple of dword or if it is less than 4096 return -EINVAL from nvme_tcp_init_connection(). Signed-off-by: Varun Prakash <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-02-23net: bridge: Add support for bridge port in locked modeHans Schultz1-0/+1
In a 802.1X scenario, clients connected to a bridge port shall not be allowed to have traffic forwarded until fully authenticated. A static fdb entry of the clients MAC address for the bridge port unlocks the client and allows bidirectional communication. This scenario is facilitated with setting the bridge port in locked mode, which is also supported by various switchcore chipsets. Signed-off-by: Hans Schultz <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-23drop_monitor: remove quadratic behaviorEric Dumazet1-1/+3
drop_monitor is using an unique list on which all netdevices in the host have an element, regardless of their netns. This scales poorly, not only at device unregister time (what I caught during my netns dismantle stress tests), but also at packet processing time whenever trace_napi_poll_hit() is called. If the intent was to avoid adding one pointer in 'struct net_device' then surely we prefer O(1) behavior. Signed-off-by: Eric Dumazet <[email protected]> Cc: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-22net: preserve skb_end_offset() in skb_unclone_keeptruesize()Eric Dumazet1-9/+9
syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len) in skb_try_coalesce() [1] I was able to root cause the issue to kfence. When kfence is in action, the following assertion is no longer true: int size = xxxx; void *ptr1 = kmalloc(size, gfp); void *ptr2 = kmalloc(size, gfp); if (ptr1 && ptr2) ASSERT(ksize(ptr1) == ksize(ptr2)); We attempted to fix these issues in the blamed commits, but forgot that TCP was possibly shifting data after skb_unclone_keeptruesize() has been used, notably from tcp_retrans_try_collapse(). So we not only need to keep same skb->truesize value, we also need to make sure TCP wont fill new tailroom that pskb_expand_head() was able to get from a addr = kmalloc(...) followed by ksize(addr) Split skb_unclone_keeptruesize() into two parts: 1) Inline skb_unclone_keeptruesize() for the common case, when skb is not cloned. 2) Out of line __skb_unclone_keeptruesize() for the 'slow path'. WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Modules linked in: CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa RSP: 0018:ffffc900063af268 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000 RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003 RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000 R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8 R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155 FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline] tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630 tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914 tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025 tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947 tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719 sk_backlog_rcv include/net/sock.h:1037 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2779 release_sock+0x54/0x1b0 net/core/sock.c:3311 sk_wait_data+0x177/0x450 net/core/sock.c:2821 tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457 tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572 inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c4777efa751d ("net: add and use skb_unclone_keeptruesize() helper") Fixes: 097b9146c0e2 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Marco Elver <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-22net: add skb_set_end_offset() helperEric Dumazet1-0/+10
We have multiple places where this helper is convenient, and plan using it in the following patch. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-21slab: remove __alloc_size attribute from __kmalloc_track_callerGreg Kroah-Hartman1-2/+1
Commit c37495d6254c ("slab: add __alloc_size attributes for better bounds checking") added __alloc_size attributes to a bunch of kmalloc function prototypes. Unfortunately the change to __kmalloc_track_caller seems to cause clang to generate broken code and the first time this is called when booting, the box will crash. While the compiler problems are being reworked and attempted to be solved [1], let's just drop the attribute to solve the issue now. Once it is resolved it can be added back. [1] https://github.com/ClangBuiltLinux/linux/issues/1599 Fixes: c37495d6254c ("slab: add __alloc_size attributes for better bounds checking") Cc: stable <[email protected]> Cc: Kees Cook <[email protected]> Cc: Daniel Micay <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Acked-by: Nick Desaulniers <[email protected]> Acked-by: David Rientjes <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Vlastimil Babka <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-02-20Merge tag 'sched_urgent_for_v5.17_rc5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "Fix task exposure order when forking tasks" * tag 'sched_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix yet more sched_fork() races
2022-02-20net: tcp: use tcp_drop_reason() for tcp_data_queue_ofo()Menglong Dong1-0/+4
Replace tcp_drop() used in tcp_data_queue_ofo with tcp_drop_reason(). Following drop reasons are introduced: SKB_DROP_REASON_TCP_OFOMERGE Reviewed-by: Mengen Sun <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-20net: tcp: use tcp_drop_reason() for tcp_data_queue()Menglong Dong1-0/+13
Replace tcp_drop() used in tcp_data_queue() with tcp_drop_reason(). Following drop reasons are introduced: SKB_DROP_REASON_TCP_ZEROWINDOW SKB_DROP_REASON_TCP_OLD_DATA SKB_DROP_REASON_TCP_OVERWINDOW SKB_DROP_REASON_TCP_OLD_DATA is used for the case that end_seq of skb less than the left edges of receive window. (Maybe there is a better name?) Reviewed-by: Mengen Sun <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-20net: tcp: use tcp_drop_reason() for tcp_rcv_established()Menglong Dong1-0/+1
Replace tcp_drop() used in tcp_rcv_established() with tcp_drop_reason(). Following drop reasons are added: SKB_DROP_REASON_TCP_FLAGS Reviewed-by: Mengen Sun <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-20net: tcp: add skb drop reasons to tcp_add_backlog()Menglong Dong1-0/+4
Pass the address of drop_reason to tcp_add_backlog() to store the reasons for skb drops when fails. Following drop reasons are introduced: SKB_DROP_REASON_SOCKET_BACKLOG Reviewed-by: Mengen Sun <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-20net: tcp: add skb drop reasons to tcp_v{4,6}_inbound_md5_hash()Menglong Dong1-0/+12
Pass the address of drop reason to tcp_v4_inbound_md5_hash() and tcp_v6_inbound_md5_hash() to store the reasons for skb drops when this function fails. Therefore, the drop reason can be passed to kfree_skb_reason() when the skb needs to be freed. Following drop reasons are added: SKB_DROP_REASON_TCP_MD5NOTFOUND SKB_DROP_REASON_TCP_MD5UNEXPECTED SKB_DROP_REASON_TCP_MD5FAILURE SKB_DROP_REASON_TCP_MD5* above correspond to LINUX_MIB_TCPMD5* Reviewed-by: Mengen Sun <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-19net: phylink: remove phylink_config's pcs_pollRussell King (Oracle)1-2/+0
phylink_config's pcs_poll is no longer used, let's get rid of it. Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-19sched: Fix yet more sched_fork() racesPeter Zijlstra1-2/+2
Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") fixed a fork race vs cgroup, it opened up a race vs syscalls by not placing the task on the runqueue before it gets exposed through the pidhash. Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is trying to fix a single instance of this, instead fix the whole class of issues, effectively reverting this commit. Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Tadeusz Struk <[email protected]> Tested-by: Zhang Qiao <[email protected]> Tested-by: Dietmar Eggemann <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2022-02-18net: Add new protocol attribute to IP addressesJacques de Laval1-0/+1
This patch adds a new protocol attribute to IPv4 and IPv6 addresses. Inspiration was taken from the protocol attribute of routes. User space applications like iproute2 can set/get the protocol with the Netlink API. The attribute is stored as an 8-bit unsigned integer. The protocol attribute is set by kernel for these categories: - IPv4 and IPv6 loopback addresses - IPv6 addresses generated from router announcements - IPv6 link local addresses User space may pass custom protocols, not defined by the kernel. Grouping addresses on their origin is useful in scenarios where you want to distinguish between addresses based on who added them, e.g. kernel vs. user space. Tagging addresses with a string label is an existing feature that could be used as a solution. Unfortunately the max length of a label is 15 characters, and for compatibility reasons the label must be prefixed with the name of the device followed by a colon. Since device names also have a max length of 15 characters, only -1 characters is guaranteed to be available for any origin tag, which is not that much. A reference implementation of user space setting and getting protocols is available for iproute2: https://github.com/westermo/iproute2/commit/9a6ea18bd79f47f293e5edc7780f315ea42ff540 Signed-off-by: Jacques de Laval <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-18Merge tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull block fixes from Jens Axboe: - Surprise removal fix (Christoph) - Ensure that pages are zeroed before submitted for userspace IO (Haimin) - Fix blk-wbt accounting issue with BFQ (Laibin) - Use bsize for discard granularity in loop (Ming) - Fix missing zone handling in blk_complete_request() (Pankaj) * tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-block: block/wbt: fix negative inflight counter when remove scsi device block: fix surprise removal for drivers calling blk_set_queue_dying block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kern block: loop:use kstatfs.f_bsize of backing file to set discard granularity block: Add handling for zone append command in blk_complete_request
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-5/+4
Fast path bpf marge for some -next work. Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-17Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-5/+4
Alexei Starovoitov says: ==================== pull-request: bpf 2022-02-17 We've added 8 non-merge commits during the last 7 day(s) which contain a total of 8 files changed, 119 insertions(+), 15 deletions(-). The main changes are: 1) Add schedule points in map batch ops, from Eric. 2) Fix bpf_msg_push_data with len 0, from Felix. 3) Fix crash due to incorrect copy_map_value, from Kumar. 4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar. 5) Fix a bpf_timer initialization issue with clang, from Yonghong. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add schedule points in batch ops bpf: Fix crash due to out of bounds access into reg2btf_ids. selftests: bpf: Check bpf_msg_push_data return value bpf: Fix a bpf_timer initialization issue bpf: Emit bpf_timer in vmlinux BTF selftests/bpf: Add test for bpf_timer overwriting crash bpf: Fix crash due to incorrect copy_map_value bpf: Do not try bpf_msg_push_data with len 0 ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-21/+14
No conflicts. Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-17Merge tag 'net-5.17-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. Current release - regressions: - dsa: lantiq_gswip: fix use after free in gswip_remove() - smc: avoid overwriting the copies of clcsock callback functions Current release - new code bugs: - iwlwifi: - fix use-after-free when no FW is present - mei: fix the pskb_may_pull check in ipv4 - mei: retry mapping the shared area - mvm: don't feed the hardware RFKILL into iwlmei Previous releases - regressions: - ipv6: mcast: use rcu-safe version of ipv6_get_lladdr() - tipc: fix wrong publisher node address in link publications - iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW assertion - bgmac: make idm and nicpm resource optional again - atl1c: fix tx timeout after link flap Previous releases - always broken: - vsock: remove vsock from connected table when connect is interrupted by a signal - ping: change destination interface checks to match raw sockets - crypto: af_alg - get rid of alg_memory_allocated to avoid confusing semantics (and null-deref) after SO_RESERVE_MEM was added - ipv6: make exclusive flowlabel checks per-netns - bonding: force carrier update when releasing slave - sched: limit TC_ACT_REPEAT loops - bridge: multicast: notify switchdev driver whenever MC processing gets disabled because of max entries reached - wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found - iwlwifi: fix locking when "HW not ready" - phy: mediatek: remove PHY mode check on MT7531 - dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN - dsa: lan9303: - fix polarity of reset during probe - fix accelerated VLAN handling" * tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) bonding: force carrier update when releasing slave nfp: flower: netdev offload check for ip6gretap ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt ipv4: fix data races in fib_alias_hw_flags_set net: dsa: lan9303: add VLAN IDs to master device net: dsa: lan9303: handle hwaccel VLAN tags vsock: remove vsock from connected table when connect is interrupted by a signal Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname" ping: fix the dif and sdif check in ping_lookup net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990 net: sched: limit TC_ACT_REPEAT loops tipc: fix wrong notification node addresses net: dsa: lantiq_gswip: fix use after free in gswip_remove() ipv6: per-netns exclusive flowlabel checks net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled CDC-NCM: avoid overflow in sanity checking mctp: fix use after free net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() bonding: fix data-races around agg_select_timer dpaa2-eth: Initialize mutex used in one step timestamping path ...
2022-02-17block: fix surprise removal for drivers calling blk_set_queue_dyingChristoph Hellwig1-1/+2
Various block drivers call blk_set_queue_dying to mark a disk as dead due to surprise removal events, but since commit 8e141f9eb803 that doesn't work given that the GD_DEAD flag needs to be set to stop I/O. Replace the driver calls to blk_set_queue_dying with a new (and properly documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the only remaining caller. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-02-15Merge tag 'hyperv-fixes-signed-20220215' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Rework use of DMA_BIT_MASK in vmbus to work around a clang bug (Michael Kelley) - Fix NUMA topology (Long Li) - Fix a memory leak in vmbus (Miaoqian Lin) - One minor clean-up patch (Cai Huoqing) * tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: utils: Make use of the helper macro LIST_HEAD() Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64) Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
2022-02-14net: wwan: debugfs obtained dev reference not droppedM Chetan Kumar1-0/+2
WWAN driver call's wwan_get_debugfs_dir() to obtain WWAN debugfs dir entry. As part of this procedure it returns a reference to a found device. Since there is no debugfs interface available at WWAN subsystem, it is not possible to drop dev reference post debugfs use. This leads to side effects like post wwan driver load and reload the wwan instance gets increment from wwanX to wwanX+1. A new debugfs interface is added in wwan subsystem so that wwan driver can drop the obtained dev reference post debugfs use. void wwan_put_debugfs_dir(struct dentry *dir) Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-14net: dev: Makes sure netif_rx() can be invoked in any context.Sebastian Andrzej Siewior1-2/+12
Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-14net_sched: add __rcu annotation to netdev->qdiscEric Dumazet1-1/+1
syzbot found a data-race [1] which lead me to add __rcu annotations to netdev->qdisc, and proper accessors to get LOCKDEP support. [1] BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1: attach_default_qdiscs net/sched/sch_generic.c:1167 [inline] dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150 __rtnl_newlink net/core/rtnetlink.c:3489 [inline] rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0: qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <[email protected]> Cc: Vlad Buslov <[email protected]> Reported-by: syzbot <[email protected]> Cc: Jamal Hadi Salim <[email protected]> Cc: Cong Wang <[email protected]> Cc: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-13Merge tag 'objtool_urgent_for_v5.17_rc4' of ↵Linus Torvalds1-16/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Borislav Petkov: "Fix a case where objtool would mistakenly warn about instructions being unreachable" * tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm
2022-02-13etherdevice: Adjust ether_addr* prototypes to silence -Wstringop-overeadKees Cook1-3/+2
With GCC 12, -Wstringop-overread was warning about an implicit cast from char[6] to char[8]. However, the extra 2 bytes are always thrown away, alignment doesn't matter, and the risk of hitting the edge of unallocated memory has been accepted, so this prototype can just be converted to a regular char *. Silences: net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread] 4618 | orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’} net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’} In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’ 375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2], | ^~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Marc Kleine-Budde <[email protected]> Tested-by: Marc Kleine-Budde <[email protected]> Link: https://lore.kernel.org/netdev/[email protected] Cc: Jakub Kicinski <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-2/+5
Merge misc fixes from Andrew Morton: "5 patches. Subsystems affected by this patch series: binfmt, procfs, and mm (vmscan, memcg, and kfence)" * emailed patches from Andrew Morton <[email protected]>: kfence: make test case compatible with run time set sample interval mm: memcg: synchronize objcg lists with a dedicated spinlock mm: vmscan: remove deadlock due to throttling failing to make progress fs/proc: task_mmu.c: don't read mapcount for migration entry fs/binfmt_elf: fix PT_LOAD p_align values for loaders
2022-02-11kfence: make test case compatible with run time set sample intervalPeng Liu1-0/+2
The parameter kfence_sample_interval can be set via boot parameter and late shell command, which is convenient for automated tests and KFENCE parameter optimization. However, KFENCE test case just uses compile-time CONFIG_KFENCE_SAMPLE_INTERVAL, which will make KFENCE test case not run as users desired. Export kfence_sample_interval, so that KFENCE test case can use run-time-set sample interval. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Peng Liu <[email protected]> Reviewed-by: Marco Elver <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Christian Knig <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-02-11mm: memcg: synchronize objcg lists with a dedicated spinlockRoman Gushchin1-2/+3
Alexander reported a circular lock dependency revealed by the mmap1 ltp test: LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1)) WARNING: possible circular locking dependency detected 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted ------------------------------------------------------ mmap1/202299 is trying to acquire lock: 00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0 but task is already holding lock: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sighand->siglock){-.-.}-{2:2}: __lock_acquire+0x604/0xbd8 lock_acquire.part.0+0xe2/0x238 lock_acquire+0xb0/0x200 _raw_spin_lock_irqsave+0x6a/0xd8 __lock_task_sighand+0x90/0x190 cgroup_freeze_task+0x2e/0x90 cgroup_migrate_execute+0x11c/0x608 cgroup_update_dfl_csses+0x246/0x270 cgroup_subtree_control_write+0x238/0x518 kernfs_fop_write_iter+0x13e/0x1e0 new_sync_write+0x100/0x190 vfs_write+0x22c/0x2d8 ksys_write+0x6c/0xf8 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #0 (css_set_lock){..-.}-{2:2}: check_prev_add+0xe0/0xed8 validate_chain+0x736/0xb20 __lock_acquire+0x604/0xbd8 lock_acquire.part.0+0xe2/0x238 lock_acquire+0xb0/0x200 _raw_spin_lock_irqsave+0x6a/0xd8 obj_cgroup_release+0x4a/0xe0 percpu_ref_put_many.constprop.0+0x150/0x168 drain_obj_stock+0x94/0xe8 refill_obj_stock+0x94/0x278 obj_cgroup_charge+0x164/0x1d8 kmem_cache_alloc+0xac/0x528 __sigqueue_alloc+0x150/0x308 __send_signal+0x260/0x550 send_signal+0x7e/0x348 force_sig_info_to_task+0x104/0x180 force_sig_fault+0x48/0x58 __do_pgm_check+0x120/0x1f0 pgm_check_handler+0x11e/0x180 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sighand->siglock); lock(css_set_lock); lock(&sighand->siglock); lock(css_set_lock); *** DEADLOCK *** 2 locks held by mmap1/202299: #0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180 #1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168 stack backtrace: CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Hardware name: IBM 3906 M04 704 (LPAR) Call Trace: dump_stack_lvl+0x76/0x98 check_noncircular+0x136/0x158 check_prev_add+0xe0/0xed8 validate_chain+0x736/0xb20 __lock_acquire+0x604/0xbd8 lock_acquire.part.0+0xe2/0x238 lock_acquire+0xb0/0x200 _raw_spin_lock_irqsave+0x6a/0xd8 obj_cgroup_release+0x4a/0xe0 percpu_ref_put_many.constprop.0+0x150/0x168 drain_obj_stock+0x94/0xe8 refill_obj_stock+0x94/0x278 obj_cgroup_charge+0x164/0x1d8 kmem_cache_alloc+0xac/0x528 __sigqueue_alloc+0x150/0x308 __send_signal+0x260/0x550 send_signal+0x7e/0x348 force_sig_info_to_task+0x104/0x180 force_sig_fault+0x48/0x58 __do_pgm_check+0x120/0x1f0 pgm_check_handler+0x11e/0x180 INFO: lockdep is turned off. In this example a slab allocation from __send_signal() caused a refilling and draining of a percpu objcg stock, resulted in a releasing of another non-related objcg. Objcg release path requires taking the css_set_lock, which is used to synchronize objcg lists. This can create a circular dependency with the sighandler lock, which is taken with the locked css_set_lock by the freezer code (to freeze a task). In general it seems that using css_set_lock to synchronize objcg lists makes any slab allocations and deallocation with the locked css_set_lock and any intervened locks risky. To fix the problem and make the code more robust let's stop using css_set_lock to synchronize objcg lists and use a new dedicated spinlock instead. Link: https://lkml.kernel.org/r/[email protected] Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API") Signed-off-by: Roman Gushchin <[email protected]> Reported-by: Alexander Egorenkov <[email protected]> Tested-by: Alexander Egorenkov <[email protected]> Reviewed-by: Waiman Long <[email protected]> Acked-by: Tejun Heo <[email protected]> Reviewed-by: Shakeel Butt <[email protected]> Reviewed-by: Jeremy Linton <[email protected]> Tested-by: Jeremy Linton <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-02-11bpf: Fix a bpf_timer initialization issueYonghong Song1-4/+2
The patch in [1] intends to fix a bpf_timer related issue, but the fix caused existing 'timer' selftest to fail with hang or some random errors. After some debug, I found an issue with check_and_init_map_value() in the hashtab.c. More specifically, in hashtab.c, we have code l_new = bpf_map_kmalloc_node(&htab->map, ...) check_and_init_map_value(&htab->map, l_new...) Note that bpf_map_kmalloc_node() does not do initialization so l_new contains random value. The function check_and_init_map_value() intends to zero the bpf_spin_lock and bpf_timer if they exist in the map. But I found bpf_spin_lock is zero'ed but bpf_timer is not zero'ed. With [1], later copy_map_value() skips copying of bpf_spin_lock and bpf_timer. The non-zero bpf_timer caused random failures for 'timer' selftest. Without [1], for both bpf_spin_lock and bpf_timer case, bpf_timer will be zero'ed, so 'timer' self test is okay. For check_and_init_map_value(), why bpf_spin_lock is zero'ed properly while bpf_timer not. In bpf uapi header, we have struct bpf_spin_lock { __u32 val; }; struct bpf_timer { __u64 :64; __u64 :64; } __attribute__((aligned(8))); The initialization code: *(struct bpf_spin_lock *)(dst + map->spin_lock_off) = (struct bpf_spin_lock){}; *(struct bpf_timer *)(dst + map->timer_off) = (struct bpf_timer){}; It appears the compiler has no obligation to initialize anonymous fields. For example, let us use clang with bpf target as below: $ cat t.c struct bpf_timer { unsigned long long :64; }; struct bpf_timer2 { unsigned long long a; }; void test(struct bpf_timer *t) { *t = (struct bpf_timer){}; } void test2(struct bpf_timer2 *t) { *t = (struct bpf_timer2){}; } $ clang -target bpf -O2 -c -g t.c $ llvm-objdump -d t.o ... 0000000000000000 <test>: 0: 95 00 00 00 00 00 00 00 exit 0000000000000008 <test2>: 1: b7 02 00 00 00 00 00 00 r2 = 0 2: 7b 21 00 00 00 00 00 00 *(u64 *)(r1 + 0) = r2 3: 95 00 00 00 00 00 00 00 exit gcc11.2 does not have the above issue. But from INTERNATIONAL STANDARD ©ISO/IEC ISO/IEC 9899:201x Programming languages — C http://www.open-std.org/Jtc1/sc22/wg14/www/docs/n1547.pdf page 157: Except where explicitly stated otherwise, for the purposes of this subclause unnamed members of objects of structure and union type do not participate in initialization. Unnamed members of structure objects have indeterminate value even after initialization. To fix the problem, let use memset for bpf_timer case in check_and_init_map_value(). For consistency, memset is also used for bpf_spin_lock case. [1] https://lore.kernel.org/bpf/[email protected]/ Fixes: 68134668c17f3 ("bpf: Add map side support for bpf timers.") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-11bpf: Fix crash due to incorrect copy_map_valueKumar Kartikeya Dwivedi1-1/+2
When both bpf_spin_lock and bpf_timer are present in a BPF map value, copy_map_value needs to skirt both objects when copying a value into and out of the map. However, the current code does not set both s_off and t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock is placed in map value with bpf_timer, as bpf_map_update_elem call will be able to overwrite the other timer object. When the issue is not fixed, an overwriting can produce the following splat: [root@(none) bpf]# ./test_progs -t timer_crash [ 15.930339] bpf_testmod: loading out-of-tree module taints kernel. [ 16.037849] ================================================================== [ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325 [ 16.039399] [ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278 [ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014 [ 16.040485] Call Trace: [ 16.040645] <TASK> [ 16.040805] dump_stack_lvl+0x59/0x73 [ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.041427] kasan_report.cold+0x116/0x11b [ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042328] ? memcpy+0x39/0x60 [ 16.042552] ? pv_hash+0xd0/0xd0 [ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0 [ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0 [ 16.043366] ? bpf_get_current_comm+0x50/0x50 [ 16.043608] ? jhash+0x11a/0x270 [ 16.043848] bpf_timer_cancel+0x34/0xe0 [ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81 [ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000 [ 16.044836] __x64_sys_nanosleep+0x5/0x140 [ 16.045119] do_syscall_64+0x59/0x80 [ 16.045377] ? lock_is_held_type+0xe4/0x140 [ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40 [ 16.046001] ? mark_held_locks+0x24/0x90 [ 16.046287] ? asm_exc_page_fault+0x1e/0x30 [ 16.046569] ? asm_exc_page_fault+0x8/0x30 [ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100 [ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.047405] RIP: 0033:0x7f9e4831718d [ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023 [ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d [ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0 [ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0 [ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30 [ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 16.051608] </TASK> [ 16.051762] ================================================================== Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.") Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-11Merge tag 'acpi-5.17-rc4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert two commits that turned out to be problematic and fix two issues related to wakeup from suspend-to-idle on x86. Specifics: - Revert a recent change that attempted to avoid issues with conflicting address ranges during PCI initialization, because it turned out to introduce a regression (Hans de Goede). - Revert a change that limited EC GPE wakeups from suspend-to-idle to systems based on Intel hardware, because it turned out that systems based on hardware from other vendors depended on that functionality too (Mario Limonciello). - Fix two issues related to the handling of wakeup interrupts and wakeup events signaled through the EC GPE during suspend-to-idle on x86 (Rafael Wysocki)" * tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems" PM: s2idle: ACPI: Fix wakeup interrupts handling ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
2022-02-11Merge tag 'wireless-next-2022-02-11' of ↵David S. Miller2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next wireless-next patches for v5.18 First set of patches for v5.18, with both wireless and stack patches. rtw89 now has AP mode support and wcn36xx has survey support. But otherwise pretty normal. Major changes: ath11k * add LDPC FEC type in 802.11 radiotap header * enable RX PPDU stats in monitor co-exist mode wcn36xx * implement survey reporting brcmfmac * add CYW43570 PCIE device rtw88 * rtw8821c: enable RFE 6 devices rtw89 * AP mode support mt76 * mt7916 support * background radar detection support
2022-02-11net/smc: Dynamic control handshake limitation by socket optionsD. Wythe1-0/+1
This patch aims to add dynamic control for SMC handshake limitation for every smc sockets, in production environment, it is possible for the same applications to handle different service types, and may have different opinion on SMC handshake limitation. This patch try socket options to complete it, since we don't have socket option level for SMC yet, which requires us to implement it at the same time. This patch does the following: - add new socket option level: SOL_SMC. - add new SMC socket option: SMC_LIMIT_HS. - provide getter/setter for SMC socket options. Link: https://lore.kernel.org/all/20f504f961e1a803f85d64229ad84260434203bd.1644323503.git.alibuda@linux.alibaba.com/ Signed-off-by: D. Wythe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-11net/smc: Limit SMC visits when handshake workqueue congestedD. Wythe1-0/+1
This patch intends to provide a mechanism to put constraint on SMC connections visit according to the pressure of SMC handshake process. At present, frequent visits will cause the incoming connections to be backlogged in SMC handshake queue, raise the connections established time. Which is quite unacceptable for those applications who base on short lived connections. There are two ways to implement this mechanism: 1. Put limitation after TCP established. 2. Put limitation before TCP established. In the first way, we need to wait and receive CLC messages that the client will potentially send, and then actively reply with a decline message, in a sense, which is also a sort of SMC handshake, affect the connections established time on its way. In the second way, the only problem is that we need to inject SMC logic into TCP when it is about to reply the incoming SYN, since we already do that, it's seems not a problem anymore. And advantage is obvious, few additional processes are required to complete the constraint. This patch use the second way. After this patch, connections who beyond constraint will not informed any SMC indication, and SMC will not be involved in any of its subsequent processes. Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: D. Wythe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.