| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.
Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.
This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.
The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.
This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.
Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing")
Signed-off-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.
CC: Maxime Bizon <mbizon@freebox.fr>
Fixes: 803ca24d2f92 ("net: mdio: Add ACPI support code for mdio")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
|
|
Pull block fixes from Jens Axboe:
"A bit bigger than usual, as the NVMe pull request missed last weeks
submission. In detail:
- NVMe pull request via Christoph:
- Avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- More quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- Fix a memory leak in the nvme-pci probe teardown path
(Irvin Cote)
- Repair the MAINTAINERS entry (Lukas Bulwahn)
- Fix handling single range discard request (Ming Lei)
- Show more opcode names in trace events (Minwoo Im)
- Fix nvme-tcp timeout reporting (Sagi Grimberg)
- MD pull request via Song:
- Two fixes for old issues (Neil)
- Resource leak in device stopping (Xiao)
- Bio based device stats fix (Yu)
- Kill unused CONFIG_BLOCK_COMPAT (Lukas)
- sunvdc missing mdesc_grab() failure check (Liang)
- Fix for reversal of request ordering upon issue for certain cases
(Jan)
- null_blk timeout fixes (Damien)
- Loop use-after-free fix (Bart)
- blk-mq SRCU fix for BLK_MQ_F_BLOCKING devices (Chris)"
* tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux:
block: remove obsolete config BLOCK_COMPAT
md: select BLOCK_LEGACY_AUTOLOAD
block: count 'ios' and 'sectors' when io is done for bio-based device
block: sunvdc: add check for mdesc_grab() returning NULL
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
block: null_blk: cleanup null_queue_rq()
block: null_blk: Fix handling of fake timeout request
blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
loop: Fix use-after-free issues
block: do not reverse request order when flushing plug list
md: avoid signed overflow in slot_store()
md: Free resources in __md_stop
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Update defconfigs
- Fix early boot code by adding missing intersection check to prevent
potential overwriting of the ipl report
- Fix a use-after-free issue in s390-specific code related to PCI
resources being retained after hot-unplugging individual functions,
by removing the resources from the PCI bus's resource list and using
the zpci_bar_struct's resource pointer directly
* tag 's390-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
PCI: s390: Fix use-after-free of PCI resources with per-function hotplug
s390/ipl: add missing intersection check to ipl_report handling
|
|
Pull drm fixes from Dave Airlie:
"Seems like a pretty regular rc3, i915 and amdgpu with the usual
selection of fixes, then a scattering of fixes across misc drivers and
other areas:
accel:
- build fix for accel
edid:
- fix info leak in edid
ttm:
- fix NULL ptr deref
- reference counting fix
i915:
- Fix hwmon PL1 power limit enabling
- Fix audio ELD handling for DP MST
- Fix PSR io and wake line calculations
- Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks
- Fix SSEU subslice out-of-bounds access
- Fix misuse of non-idle barriers as fence trackers
amdgpu:
- SMU 13 update
- RDNA2 suspend/resume fix when overclocking is enabled
- SRIOV VCN fixes
- HDCP suspend/resume fix
- Fix drm polling splat regression
- Fix dirty rectangle tracking for PSR
- Fix vangogh regression on certain BIOSes
- Misc display fixes
- Suspend/resume IOMMU regression fix
amdkfd:
- Fix BO offset for multi-VMA page migration
- Fix a possible double free
- Fix potential use after free
- Fix process cleanup on module exit
bridge:
- fix returned array size name documentation
fbdev:
- ref-counting fix for fbdev deferred I/O
virtio:
- dma sync fix
shmem-helper:
- error path fix
msm:
- shrinker blocking fix
panfrost:
- shrinker rpm fix
chipsfb:
- fix error code
meson:
- fix 1px pink line
- fix regulator interaction
sun4i:
- fix missing component unbind"
* tag 'drm-fixes-2023-03-17' of git://anongit.freedesktop.org/drm/drm: (38 commits)
drm/ttm: drop extra ttm_bo_put in ttm_bo_cleanup_refs
drm/amdgpu: Don't resume IOMMU after incomplete init
drm/amdkfd: Fixed kfd_process cleanup on module exit.
drm/amd/display: disconnect MPCC only on OTG change
drm/amd/display: Fix DP MST sinks removal issue
drm/amd/display: Do not set DRR on pipe Commit
drm/amd/display: Remove OTG DIV register write for Virtual signals.
drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion again
drm/bridge: Fix returned array size name for atomic_get_input_bus_fmts kdoc
drm/amdgpu/vcn: Disable indirect SRAM on Vangogh broken BIOSes
drm/amdgpu/nv: fix codec array for SR_IOV
drm/amd/display: Write to correct dirty_rect
drm/amdgpu: move poll enabled/disable into non DC path
drm/amd/display: Fix HDCP failing to enable after suspend
drm/amdkfd: fix potential kgd_mem UAFs
drm/amdgpu/vcn: custom video info caps for sriov
drm/amd/pm: Fix sienna cichlid incorrect OD volage after resume
drm/amd/pm: bump SMU 13.0.4 driver_if header version
drm/amdkfd: fix a potential double free in pqm_create_queue
drm/amdkfd: Get prange->offset after svm_range_vram_node_new
...
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.3
- avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- more quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- fix a memory leak in the nvme-pci probe teardown path (Irvin Cote)
- repair the MAINTAINERS entry (Lukas Bulwahn)
- fix handling single range discard request (Ming Lei)
- show more opcode names in trace events (Minwoo Im)
- fix nvme-tcp timeout reporting (Sagi Grimberg)"
* tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme:
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
|
|
While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.
Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.
Fixes: 394ffa503bc4 ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have more commands to show in the trace. Sync up.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
IP tunnels can apparently update dev->needed_headroom
in their xmit path.
This patch takes care of three tunnels xmit, and also the
core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA()
helpers.
More changes might be needed for completeness.
BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit
read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1:
ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
write to 0xffff88815b9da0ec of 2 bytes by task 2379 on cpu 0:
ip_tunnel_xmit+0x1294/0x1730 net/ipv4/ip_tunnel.c:804
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip6_finish_output2+0x9bc/0xc50 net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x39a/0x4e0 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:444 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
mld_sendpack+0x438/0x6a0 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x519/0x7b0 net/ipv6/mcast.c:2653
process_one_work+0x3e6/0x750 kernel/workqueue.c:2390
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2537
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x0dd4 -> 0x0e14
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5fa354-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Workqueue: mld mld_ifc_work
Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230310191109.2384387-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow histogram values to have modifies. They can cause a NULL
pointer dereference if they do.
- Warn if hist_field_name() is passed a NULL. Prevent the NULL pointer
dereference mentioned above.
- Fix invalid address look up race in lookup_rec()
- Define ftrace_stub_graph conditionally to prevent linker errors
- Always check if RCU is watching at all tracepoint locations
* tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make tracepoint lockdep check actually test something
ftrace,kcfi: Define ftrace_stub_graph conditionally
ftrace: Fix invalid address access in lookup_rec() when index is 0
tracing: Check field value in hist_field_name()
tracing: Do not let histogram values have some modifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of clk driver fixes, and a couple OF clk patches to fix
regressions seen in the last few weeks. The fwnode patch broke the
build for one driver that isn't always compiled, so I waited over the
weekend to be certain no more build issues came up.
- Mark the firmware node (fwnode) that matches the compatible in
CLK_OF_DECLARE() as initialized to fix a regression on u8500 SoCs
after fw_devlink stopped checking parent nodes in
of_link_to_phandle()
- Remove a couple MODULE_LICENSE macros in non-modules
- Update the maintainers file for Microchip clk drivers
- Use 'select' instead of 'depend on' for the REGMAP config to fix
Kconfig issues
- Use div_u64() for portable 64-bit division in K210 clk driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Avoid invalid function names in CLK_OF_DECLARE()
clk: k210: remove an implicit 64-bit division
MAINTAINERS: add missing clock driver coverage for Microchip FPGAs
clk: HI655X: select REGMAP instead of depending on it
kbuild, clk: remove MODULE_LICENSE in non-modules
kbuild, clk: bcm2835: remove MODULE_LICENSE in non-modules
clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro
|
|
A while ago where the trace events had the following:
rcu_read_lock_sched_notrace();
rcu_dereference_sched(...);
rcu_read_unlock_sched_notrace();
If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).
But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.
The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).
Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.
Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit 26fed4ac4eab ("block: flush plug based on hardware and software
queue order") changed flushing of plug list to submit requests one
device at a time. However while doing that it also started using
list_add_tail() instead of list_add() used previously thus effectively
submitting requests in reverse order. Also when forming a rq_list with
remaining requests (in case two or more devices are used), we
effectively reverse the ordering of the plug list for each device we
process. Submitting requests in reverse order has negative impact on
performance for rotational disks (when BFQ is not in use). We observe
10-25% regression in random 4k write throughput, as well as ~20%
regression in MariaDB OLTP benchmark on rotational storage on btrfs
filesystem.
Fix the problem by preserving ordering of the plug list when inserting
requests into the queuelist as well as by appending to requeue_list
instead of prepending to it.
Fixes: 26fed4ac4eab ("block: flush plug based on hardware and software queue order")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230313093002.11756-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Backmerging to get latest upstream.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit a50297cf8235 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly.
Fixes: a50297cf8235 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
|
|
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
|
|
The generic bmap() function exported by the VFS takes locks and does
checks that are not necessary for the journal inode. So allow the
file system to set a journal-optimized bmap function in
journal->j_bmap.
Reported-by: syzbot+9543479984ae9e576000@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=e4aaa78795e490421c79f76ec3679006c8ff4cf0
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull put_and_unmap_page() helper from Al Viro:
"kmap_local_page() conversions in local filesystems keep running into
kunmap_local_page()+put_page() combinations. We can keep inventing
names for identical inline helpers, but it's getting rather
inconvenient. I've added a trivial helper to linux/highmem.h instead.
I would've held that back until the merge window, if not for the mess
it causes in tree topology - I've several branches merging from that
one, and it's only going to get worse if e.g. ext2 stuff gets picked
by Jan"
* tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
new helper: put_and_unmap_page()
|
|
The recent fix for the deferred I/O by the commit
3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
caused a regression when the same fb device is opened/closed while
it's being used. It resulted in a frozen screen even if something
is redrawn there after the close. The breakage is because the patch
was made under a wrong assumption of a single open; in the current
code, fb_deferred_io_release() cleans up the page mapping of the
pageref list and it calls cancel_delayed_work_sync() unconditionally,
where both are no correct behavior for multiple opens.
This patch adds a refcount for the opens of the device, and applies
the cleanup only when all files get closed.
As both fb_deferred_io_open() and _close() are called always in the
fb_info lock (mutex), it's safe to use the normal int for the
refcounting.
Also, a useless BUG_ON() is dropped.
Fixes: 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de
|
|
After commit c28cd1f3433c ("clk: Mark a fwnode as initialized when using
CLK_OF_DECLARE() macro"), drivers/clk/mvebu/kirkwood.c fails to build:
drivers/clk/mvebu/kirkwood.c:358:1: error: expected identifier or '('
CLK_OF_DECLARE(98dx1135_clk, "marvell,mv98dx1135-core-clock",
^
include/linux/clk-provider.h:1367:21: note: expanded from macro 'CLK_OF_DECLARE'
static void __init name##_of_clk_init_declare(struct device_node *np) \
^
<scratch space>:124:1: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
C function names must start with either an alphabetic letter or an
underscore. To avoid generating invalid function names from clock names,
add two underscores to the beginning of the identifier.
Fixes: c28cd1f3433c ("clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro")
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230308-clk_of_declare-fix-v1-1-317b741e2532@kernel.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back
type") introduced a new probe callback to convert i2c init routines to
not take an i2c_device_id parameter. Now that all in-tree drivers are
converted to the temporary .probe_new() callback, .probe() can be
modified to match the desired prototype.
Now that .probe() and .probe_new() have the same semantic, they can be
defined as members of an anonymous union to save some memory and
simplify the core code a bit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential out of bound write of zeroes in HID core with a
specially crafted uhid device (Lee Jones)
- fix potential use-after-free in work function in intel-ish-hid (Reka
Norman)
- selftests config fixes (Benjamin Tissoires)
- few device small fixes and support
* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
selftest: hid: fix hid_bpf not set in config
HID: uhid: Over-ride the default maximum data buffer value with our own
HID: core: Provide new max_buffer_size attribute to over-ride the default
|
|
Commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask
optimizations") changed cpumask_setall() to use "bitmap_set()" instead
of "bitmap_fill()", because bitmap_fill() would explicitly set all the
bits of a constant sized small bitmap, and that's exactly what we don't
want: we want to only set bits up to 'nr_cpu_ids', which is what
"bitmap_set()" does.
However, Yury correctly points out that while "bitmap_set()" does indeed
only set bits up to the required bitmap size, it doesn't _clear_ bits
above that size, so the upper bits would still not have well-defined
values.
Now, none of this should really matter, since any bits set past
'nr_cpu_ids' should always be ignored in the first place. Yes, the bit
scanning functions might return them as a result, but since users should
always consider the ">= nr_cpu_ids" condition to mean "no more bits",
that shouldn't have any actual effect (see previous commit 8ca09d5fa354
"cpumask: fix incorrect cpumask scanning result checks").
But let's just do it right, the way the code was _intended_ to work. We
have had enough lazy code that works but bites us in the *rse later
(again, see previous commit) that there's no reason to not just do this
properly.
It turns out that "bitmap_fill()" gets this all right for the complex
case, and really only fails for the inlined optimized case that just
fills the whole word. And while we could just fix bitmap_fill() to use
the proper last word mask, there's two issues with that:
- the cpumask case wants to do the _optimization_ based on "NR_CPUS is
a small constant", but then wants to do the actual bit _fill_ based
on "nr_cpu_ids" that isn't necessarily that same constant
- we have lots of non-cpumask users of bitmap_fill(), and while they
hopefully don't care, and probably would want the proper semantics
anyway ("only set bits up to the limit"), I do not want the cpumask
changes to impact other parts
So this ends up just doing the single-word optimization by hand in the
cpumask code. If our cpumask is fundamentally limited to a single word,
just do the proper "fill in that word" exactly. And if it's the more
complex multi-word case, then the generic bitmap_fill() will DTRT.
This is all an example of how our bitmap function optimizations really
are somewhat broken. They conflate the "this is size of the bitmap"
optimizations with the actual bit(s) we want to set.
In many cases we really want to have the two be separate things:
sometimes we base our optimizations on the size of the whole bitmap ("I
know this whole bitmap fits in a single word, so I'll just use
single-word accesses"), and sometimes we base them on the bit we are
looking at ("this is just acting on bits that are in the first word, so
I'll use single-word accesses").
Notice how the end result of the two optimizations are the same, but the
way we get to them are quite different.
And all our cpumask optimization games are really about that fundamental
distinction, and we'd often really want to pass in both the "this is the
bit I'm working on" (which _can_ be a small constant but might be
variable), and "I know it's in this range even if it's variable" (based
on CONFIG_NR_CPUS).
So this cpumask_setall() implementation just makes that explicit. It
checks the "I statically know the size is small" using the known static
size of the cpumask (which is what that 'small_cpumask_bits' is all
about), but then sets the actual bits using the exact number of cpus we
have (ie 'nr_cpumask_bits')
Of course, in a perfect world, the compiler would have done all the
range analysis (possibly with help from us just telling it that
"this value is always in this range"), and would do all of this for us.
But that is not the world we live in.
While we dream of that perfect world, this does that manual logic to
make it all work out. And this was a very long explanation for a small
code change that shouldn't even matter.
Reported-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/lkml/ZAV9nGG9e1%2FrV+L%2F@yury-laptop/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kunmap_local() + put_page(), as done by e.g. ext2 directory handling.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We already mark fwnodes as initialized when they are registered as clock
providers. We do this so that fw_devlink can tell when a clock driver
doesn't use the driver core framework to probe/initialize its device.
This ensures fw_devlink doesn't block the consumers of such a clock
provider indefinitely.
However, some users of CLK_OF_DECLARE() macros don't use the same node
that matches the macro as the node for the clock provider, but they
initialize the entire node. To cover these cases, also mark the nodes
that match the macros as initialized when the init callback function is
called.
An example of this is "stericsson,u8500-clks" that's handled using
CLK_OF_DECLARE() and looks something like this:
clocks {
compatible = "stericsson,u8500-clks";
prcmu_clk: prcmu-clock {
#clock-cells = <1>;
};
prcc_pclk: prcc-periph-clock {
#clock-cells = <2>;
};
prcc_kclk: prcc-kernel-clock {
#clock-cells = <2>;
};
prcc_reset: prcc-reset-controller {
#reset-cells = <2>;
};
...
};
This patch makes sure that "clocks" is marked as initialized so that
fw_devlink knows that all nodes under it have been initialized. If the
driver creates struct devices for some of the subnodes, fw_devlink is
smart enough to know to wait for those devices to probe, so no special
handling is required for those cases.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/lkml/CACRpkdamxDX6EBVjKX5=D3rkHp17f5pwGdBVhzFU90-0MHY6dQ@mail.gmail.com/
Fixes: 4a032827daa8 ("of: property: Simplify of_link_to_phandle()")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20230302014639.297514-1-saravanak@google.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The never used nr_cpumask_size is just a typo, hence use existing
redefinition that's called nr_cpumask_bits.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A set of updates for the interrupt susbsystem:
- Prevent possible NULL pointer derefences in
irq_data_get_affinity_mask() and irq_domain_create_hierarchy()
- Take the per device MSI lock before invoking code which relies on
it being hold
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted
to use core infrastructure and results in a fals positive warning
- Remove dead code in the MSI subsystem
- Clarify the documentation for pci_msix_free_irq()
- More kobj_type constification"
* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
genirq/msi: Drop dead domain name assignment
irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
genirq/irqdesc: Make kobj_type structures constant
PCI/MSI: Clarify usage of pci_msix_free_irq()
genirq/msi: Take the per-device MSI lock before validating the control structure
genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
|
|
include/linux/compiler-intel.h had no update in the past 3 years.
We often forget about the third C compiler to build the kernel.
For example, commit a0a12c3ed057 ("asm goto: eradicate CC_HAS_ASM_GOTO")
only mentioned GCC and Clang.
init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC,
and nobody has reported any issue.
I guess the Intel Compiler support is broken, and nobody is caring
about it.
Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is
deprecated:
$ icc -v
icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
deprecated and will be removed from product release in the second half
of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
compiler moving forward. Please transition to use this compiler. Use
'-diag-disable=10441' to disable this message.
icc version 2021.7.0 (gcc version 12.1.0 compatibility)
Arnd Bergmann provided a link to the article, "Intel C/C++ compilers
complete adoption of LLVM".
lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept
untouched for better sync with https://github.com/facebook/zstd
Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes.
Eight are for MM and seven are for other parts of the kernel. Seven
are cc:stable and eight address post-6.3 issues or were judged
unsuitable for -stable backporting"
* tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: map Dikshita Agarwal's old address to his current one
mailmap: map Vikash Garodia's old address to his current one
fs/cramfs/inode.c: initialize file_ra_state
fs: hfsplus: fix UAF issue in hfsplus_put_super
panic: fix the panic_print NMI backtrace setting
lib: parser: update documentation for match_NUMBER functions
kasan, x86: don't rename memintrinsics in uninstrumented files
kasan: test: fix test for new meminstrinsic instrumentation
kasan: treat meminstrinsic as builtins in uninstrumented files
kasan: emit different calls for instrumentable memintrinsics
ocfs2: fix non-auto defrag path not working issue
ocfs2: fix defrag path triggering jbd2 ASSERT
mailmap: map Georgi Djakov's old Linaro address to his current one
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH
mm/damon/paddr: fix missing folio_put()
mm/mremap: fix dup_anon_vma() in vma_merge() case 4
|
|
Pull more io_uring updates from Jens Axboe:
"Here's a set of fixes/changes that didn't make the first cut, either
because they got queued before I sent the early merge request, or
fixes that came in afterwards. In detail:
- Don't set MSG_NOSIGNAL on recv/recvmsg opcodes, as AF_PACKET will
error out (David)
- Fix for spurious poll wakeups (me)
- Fix for a file leak for buffered reads in certain conditions
(Joseph)
- Don't allow registered buffers of mixed types (Pavel)
- Improve handling of huge pages for registered buffers (Pavel)
- Provided buffer ring size calculation fix (Wojciech)
- Minor cleanups (me)"
* tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux:
io_uring/poll: don't pass in wake func to io_init_poll_iocb()
io_uring: fix fget leak when fs don't support nowait buffered read
io_uring/poll: allow some retries for poll triggering spuriously
io_uring: remove MSG_NOSIGNAL from recvmsg
io_uring/rsrc: always initialize 'folio' to NULL
io_uring/rsrc: optimise registered huge pages
io_uring/rsrc: optimise single entry advance
io_uring/rsrc: disallow multi-source reg buffers
io_uring: remove unused wq_list_merge
io_uring: fix size calculation when registering buf ring
io_uring/rsrc: fix a comment in io_import_fixed()
io_uring: rename 'in_idle' to 'in_cancel'
io_uring: consolidate the put_ref-and-return section of adding work
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Don't access released socket during error recovery (Akinobu
Mita)
- Bring back auto-removal of deleted namespaces during sequential
scan (Christoph Hellwig)
- Fix an error code in nvme_auth_process_dhchap_challenge (Dan
Carpenter)
- Show well known discovery name (Daniel Wagner)
- Add a missing endianess conversion in effects masking (Keith
Busch)
- Fix for a regression introduced in blk-rq-qos during init in this
merge window (Breno)
- Reorder a few fields in struct blk_mq_tag_set, eliminating a few
holes and shrinking it (Christophe)
- Remove redundant bdev_get_queue() NULL checks (Juhyung)
- Add sed-opal single user mode support flag (Luca)
- Remove SQE128 check in ublk as it isn't needed, saving some memory
(Ming)
- Op specific segment checking for cloned requests (Uday)
- Exclusive open partition scan fixes (Yu)
- Loop offset/size checking before assigning them in the device (Zhong)
- Bio polling fixes (me)
* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
nvme-fabrics: show well known discovery name
nvme-tcp: don't access released socket during error recovery
nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
nvme: bring back auto-removal of deleted namespaces during sequential scan
blk-iocost: Pass gendisk to ioc_refresh_params
nvme: fix sparse warning on effects masking
block: be a bit more careful in checking for NULL bdev while polling
block: clear bio->bi_bdev when putting a bio back in the cache
loop: loop_set_status_from_info() check before assignment
ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
block: remove more NULL checks after bdev_get_queue()
blk-mq: Reorder fields in 'struct blk_mq_tag_set'
block: fix scan partition for exclusively open device again
block: Revert "block: Do not reread partition table on exclusively open device"
sed-opal: add support flag for SUM in status ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A few drivers got some nice cleanups and a new driver are making the
bulk of the changes.
Subsystem:
- allow rtc_read_alarm without read_alarm callback
New driver:
- NXP BBNSM module RTC
Drivers:
- use IRQ flags from fwnode when available
- abx80x: nvmem support
- brcmstb-waketimer: add non-wake alarm support
- ingenic: provide CLK32K clock
- isl12022: cleanups
- moxart: switch to using gpiod API
- pcf85363: allow setting quartz load
- pm8xxx: cleanups and support for setting time
- rv3028, rv3032: add ACPI support"
* tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits)
rtc: pm8xxx: add support for nvmem offset
dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset
rtc: abx80x: Add nvmem support
rtc: rx6110: Remove unused of_gpio,h
rtc: efi: Avoid spamming the log on RTC read failure
rtc: isl12022: sort header inclusion alphabetically
rtc: isl12022: Join string literals back
rtc: isl12022: Drop unneeded OF guards and of_match_ptr()
rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L
rtc: isl12022: Get rid of unneeded private struct isl12022
rtc: pcf85363: add support for the quartz-load-femtofarads property
dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding
rtc: allow rtc_read_alarm without read_alarm callback
rtc: rv3032: add ACPI support
rtc: rv3028: add ACPI support
rtc: bbnsm: Add the bbnsm rtc support
rtc: jz4740: Register clock provider for the CLK32K pin
rtc: jz4740: Use dev_err_probe()
rtc: jz4740: Use readl_poll_timeout
dt-bindings: rtc: Add #clock-cells property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Shrink 'struct instruction', to improve objtool performance & memory
footprint
- Other maximum memory usage reductions - this makes the build both
faster, and fixes kernel build OOM failures on allyesconfig and
similar configs when they try to build the final (large) vmlinux.o
- Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
single-byte instruction (PUSH/POP or LEAVE). This requires the
extension of the ORC metadata structure with a 'signal' field
- Misc fixes & cleanups
* tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
objtool: Fix ORC 'signal' propagation
objtool: Remove instruction::list
x86: Fix FILL_RETURN_BUFFER
objtool: Fix overlapping alternatives
objtool: Union instruction::{call_dest,jump_table}
objtool: Remove instruction::reloc
objtool: Shrink instruction::{type,visited}
objtool: Make instruction::alts a single-linked list
objtool: Make instruction::stack_ops a single-linked list
objtool: Change arch_decode_instruction() signature
x86/entry: Fix unwinding from kprobe on PUSH/POP instruction
x86/unwind/orc: Add 'signal' field to ORC metadata
objtool: Optimize layout of struct special_alt
objtool: Optimize layout of struct symbol
objtool: Allocate multiple structures with calloc()
objtool: Make struct check_options static
objtool: Make struct entries[] static and const
objtool: Fix HOSTCC flag usage
objtool: Properly support make V=1
objtool: Install libsubcmd in build
...
|
|
Miquel reported a warning in the MSI core which is triggered when
interrupts are freed via platform_msi_device_domain_free().
This code got reworked to use core functions for freeing the MSI
descriptors, but nothing took care to clear the msi_desc->irq entry, which
then triggers the warning in msi_free_msi_desc() which uses desc->irq to
validate that the descriptor has been torn down. The same issue exists in
msi_domain_populate_irqs().
Up to the point that msi_free_msi_descs() grew a warning for this case,
this went un-noticed.
Provide the counterpart of msi_domain_populate_irqs() and invoke it in
platform_msi_device_domain_free() before freeing the interrupts and MSI
descriptors and also in the error path of msi_domain_populate_irqs().
Fixes: 2f2940d16823 ("genirq/msi: Remove filter from msi_free_descs_free_range()")
Reported-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87mt4wkwnv.ffs@tglx
|
|
Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words. It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.
That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more. And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation. It's a lose-lose
situation.
So just change the 'u32[2]' into a 'u64' and be done with it.
We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).
So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.
This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently. By just using a saner data structure, it went from
unsigned __capi;
CAP_FOR_EACH_U32(__capi) {
if (a.cap[__capi] != b.cap[__capi])
return false;
}
return true;
to just being
return a.val == b.val;
instead. Which is rather more obvious both to humans and to compilers.
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
- regression fix in connection with the rtl8169 driver on SuperH boards
that was introduced when the driver was switched to use
devm_clk_get_optional_enabled() to simplify the code (Geert
Uytterhoeven)
- build warning fix to allow the kernel to be built with CONFIG_WERROR
enabled (Michael Karcher)
* tag 'sh-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: clk: Fix clk_enable() to return 0 on NULL clk
sh: intc: Avoid spurious sizeof-pointer-div warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull jffs2, ubi and ubifs updates from Richard Weinberger:
"JFFS2:
- Fix memory corruption in error path
- Spelling and coding style fixes
UBI:
- Switch to BLK_MQ_F_BLOCKING in ubiblock
- Wire up partent device (for sysfs)
- Multiple UAF bugfixes
- Fix for an infinite loop in WL error path
UBIFS:
- Fix for multiple memory leaks in error paths
- Fixes for wrong space accounting
- Minor cleanups
- Spelling and coding style fixes"
* tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (36 commits)
ubi: block: Fix a possible use-after-free bug in ubiblock_create()
ubifs: make kobj_type structures constant
mtd: ubi: block: wire-up device parent
mtd: ubi: wire-up parent MTD device
ubi: use correct names in function kernel-doc comments
ubi: block: set BLK_MQ_F_BLOCKING
jffs2: Fix list_del corruption if compressors initialized failed
jffs2: Use function instead of macro when initialize compressors
jffs2: fix spelling mistake "neccecary"->"necessary"
ubifs: Fix kernel-doc
ubifs: Fix some kernel-doc comments
UBI: Fastmap: Fix kernel-doc
ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
ubifs: ubifs_writepage: Mark page dirty after writing inode failed
ubifs: dirty_cow_znode: Fix memleak in error handling path
ubifs: Re-statistic cleaned znode count if commit failed
ubi: Fix permission display of the debugfs files
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This rather small set of changes includes some minor fixes and
improvements.
The AB8500 driver gained support for reading the initial hardware
state and the Synopsys DesignWare driver received some work to prepare
for device tree and platform support"
* tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: dwc: Use devm_pwmchip_add()
pwm: dwc: Move memory allocation to own function
pwm: dwc: Change &pci->dev to dev in probe
dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
pwm: iqs620a: Replace one remaining instance of regmap_update_bits()
pwm: ab8500: Implement .get_state()
pwm: ab8500: Fix calculation of duty and period
pwm: lp3943: Drop unused i2c include
dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
pwm: stm32-lp: fix the check on arr and cmp registers update
pwm: Move pwm_capture() dummy to restore order
pwm: sifive: Always let the first pwm_apply_state succeed
|
|
After a memory error happens on a clean folio, a process unexpectedly
receives SIGBUS when it accesses the error page. This SIGBUS killing is
pointless and simply degrades the level of RAS of the system, because the
clean folio can be dropped without any data lost on memory error handling
as we do for a clean pagecache.
When memory_failure() is called on a clean folio, try_to_unmap() is called
twice (one from split_huge_page() and one from hwpoison_user_mappings()).
The root cause of the issue is that pte conversion to hwpoisoned entry is
now done in the first call of try_to_unmap() because PageHWPoison is
already set at this point, while it's actually expected to be done in the
second call. This behavior disturbs the error handling operation like
removing pagecache, which results in the malfunction described above.
So convert TTU_IGNORE_HWPOISON into TTU_HWPOISON and set TTU_HWPOISON only
when we really intend to convert pte to hwpoison entry. This can prevent
other callers of try_to_unmap() from accidentally converting to hwpoison
entries.
Link: https://lkml.kernel.org/r/20230221085905.1465385-1-naoya.horiguchi@linux.dev
Fixes: a42634a6c07d ("readahead: Use a folio in read_pages()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've got a huge number of patches that improve code
readability along with minor bug fixes, while we've mainly fixed some
critical issues in recently-added per-block age-based extent_cache,
atomic write support, and some folio cases.
Enhancements:
- add sysfs nodes to set last_age_weight and manage
discard_io_aware_gran
- show ipu policy in debugfs
- reduce stack memory cost by using bitfield in struct f2fs_io_info
- introduce trace_f2fs_replace_atomic_write_block
- enhance iostat support and adds flush commands
Bug fixes:
- revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
- fix kernel crash on the atomic write abort flow
- call clear_page_private_reference in .{release,invalid}_folio
- support .migrate_folio for compressed inode
- fix cgroup writeback accounting with fs-layer encryption
- retry to update the inode page given data corruption
- fix kernel crash due to NULL io->bio
- fix some bugs in per-block age-based extent_cache:
- wrong calculation of block age
- update age extent in f2fs_do_zero_range()
- update age extent correctly during truncation"
* tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
f2fs: drop unnecessary arg for f2fs_ioc_*()
f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
f2fs: synchronize atomic write aborts
f2fs: fix wrong segment count
f2fs: replace si->sbi w/ sbi in stat_show()
f2fs: export ipu policy in debugfs
f2fs: make kobj_type structures constant
f2fs: fix to do sanity check on extent cache correctly
f2fs: add missing description for ipu_policy node
f2fs: fix to set ipu policy
f2fs: fix typos in comments
f2fs: fix kernel crash due to null io->bio
f2fs: use iostat_lat_type directly as a parameter in the iostat_update_and_unbind_ctx()
f2fs: add sysfs nodes to set last_age_weight
f2fs: fix f2fs_show_options to show nogc_merge mount option
f2fs: fix cgroup writeback accounting with fs-layer encryption
f2fs: fix wrong calculation of block age
f2fs: fix to update age extent in f2fs_do_zero_range()
f2fs: fix to update age extent correctly during truncation
f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Extend slot-gpio to be used for host specific card detect interrupts
- Align to common busy polling behaviour for mmc ioctls
- Suggest the BFQ I/O scheduler to be built along with MMC/SD support
- Add devm_mmc_alloc_host() to enable further cleanups in host drivers
MMC host:
- atmel-mci: Fix race condition when stopping/starting a command
- dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
- dw_mmc-rockchip: Add support for the RK3588 variant
- jz4740: Add support for the vqmmc power supply
- meson-gx: Convert the DT bindings to the dt-schema
- meson-gx: Enable the platform interrupt to be used for card detect
- moxart: Set the supported maximum request/block/segment sizes
- renesas,sdhi: Add support for the RZ/V2M variants
- sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
- sdhci-esdhc-imx: Improve tuning logic support
- sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
- sdhci-of-dwcmshc: Add the missing device table IDs for acpi
- sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
- sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
- sdhci-pxav2: Add support for the PXA168 V1 variant
- sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
- uniphier-sd: Add support for SD UHS-I speed modes"
* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
mmc: meson-gx: constify member data of struct meson_host
mmc: meson-gx: use devm_clk_get_enabled() for core clock
mmc: core: fix return value check in devm_mmc_alloc_host()
dt-bindings: mmc: meson-gx: fix interrupt binding
mmc: meson-gx: support platform interrupt as card detect interrupt
dt-bindings: mmc: meson-gx: support specifying cd interrupt
mmc: core: support setting card detect interrupt from drivers
mmc: starfive: Add sdio/emmc driver support
dt-bindings: mmc: Add StarFive MMC module
dt-bindings: mmc: sdhci-msm: Allow 1 icc path
dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
mmc: core: Align to common busy polling behaviour for mmc ioctls
dt-bindings: mmc: Add resets property to cadence SDHCI binding
mmc: meson-gx: remove meson_mmc_get_cd
mmc: moxart: set maximum request/block/segment sizes
mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
mmc: jz4740: Add support for vqmmc power supply
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- remove a not very useful and now unused swiotlb API (Christoph
Hellwig)
- fix a section mismatch (Randy Dunlap)
* tag 'dma-mapping-6.3-2022-02-27' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: mark swiotlb_memblock_alloc() as __init
swiotlb: remove swiotlb_max_segment
|