aboutsummaryrefslogtreecommitdiff
path: root/include/linux/soc
AgeCommit message (Collapse)AuthorFilesLines
2023-01-31soc: apple: rtkit: Add apple_rtkit_idle() functionHector Martin1-0/+5
This is yet another low power mode, used by DCP. Reviewed-by: Eric Curtin <[email protected]> Reviewed-by: Sven Peter <[email protected]> Signed-off-by: Hector Martin <[email protected]>
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/[email protected]/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-25soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1Nancy.Lin1-4/+11
Add cmdq support for mtk-mmsys config API. The mmsys config register settings need to take effect with the other HW settings(like OVL_ADAPTOR...) at the same vblanking time. If we use CPU to write the mmsys reg, we can't guarantee all the settings can be written in the same vblanking time. Cmdq is used for this purpose. We prepare all the related HW settings in one cmdq packet. The first command in the packet is "wait stream done", and then following with all the HW settings. After the cmdq packet is flush to GCE HW. The GCE waits for the "stream done event" to coming and then starts flushing all the HW settings. This can guarantee all the settings flush in the same vblanking. Signed-off-by: Nancy.Lin <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: CK Hu <[email protected]> Tested-by: AngeloGioacchino Del Regno <[email protected]> Tested-by: Bo-Chen Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-01-25soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1Nancy.Lin1-0/+9
Add four mmsys config APIs. The config APIs are used for config mmsys reg. Some mmsys regs need to be set according to the HW engine binding to the mmsys simultaneously. 1. mtk_mmsys_merge_async_config: config merge async width/height. async is used for cross-clock domain synchronization. 2. mtk_mmsys_hdr_confing: config hdr backend async width/height. 3. mtk_mmsys_mixer_in_config and mtk_mmsys_mixer_in_config: config mixer related settings. Signed-off-by: Nancy.Lin <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: CK Hu <[email protected]> Tested-by: AngeloGioacchino Del Regno <[email protected]> Tested-by: Bo-Chen Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-01-25soc: mediatek: add mtk-mmsys ethdr and mdp_rdma componentsNancy.Lin1-0/+9
Add new mmsys component: ethdr_mixer and mdp_rdma. These components will use in mt8195 vdosys1. Signed-off-by: Nancy.Lin <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: CK Hu <[email protected]> Tested-by: AngeloGioacchino Del Regno <[email protected]> Tested-by: Bo-Chen Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-01-23Merge tag 'wireless-next-2023-01-23' of ↵Jakub Kicinski1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.3 First set of patches for v6.3. The most important change here is that the old Wireless Extension user space interface is not supported on Wi-Fi 7 devices at all. We also added a warning if anyone with modern drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless Extensions, everyone should switch to using nl80211 interface instead. Static WEP support is removed, there wasn't any driver using that anyway so there's no user impact. Otherwise it's smaller features and fixes as usual. Note: As mt76 had tricky conflicts due to the fixes in wireless tree, we decided to merge wireless into wireless-next to solve them easily. There should not be any merge problems anymore. Major changes: cfg80211 - remove never used static WEP support - warn if Wireless Extention interface is used with cfg80211/mac80211 drivers - stop supporting Wireless Extensions with Wi-Fi 7 devices - support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting rfkill - add GPIO DT support bitfield - add FIELD_PREP_CONST() mt76 - per-PHY LED support rtw89 - support new Bluetooth co-existance version rtl8xxxu - support RTL8188EU * tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (123 commits) wifi: wireless: deny wireless extensions on MLO-capable devices wifi: wireless: warn on most wireless extension usage wifi: mac80211: drop extra 'e' from ieeee80211... name wifi: cfg80211: Deduplicate certificate loading bitfield: add FIELD_PREP_CONST() wifi: mac80211: add kernel-doc for EHT structure mac80211: support minimal EHT rate reporting on RX wifi: mac80211: Add HE MU-MIMO related flags in ieee80211_bss_conf wifi: mac80211: Add VHT MU-MIMO related flags in ieee80211_bss_conf wifi: cfg80211: Use MLD address to indicate MLD STA disconnection wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data() wifi: cfg80211: remove support for static WEP wifi: rtl8xxxu: Dump the efuse only for untested devices wifi: rtl8xxxu: Print the ROM version too wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update() wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter() wifi: rtw88: Move register access from rtw_bf_assoc() outside the RCU wifi: rtl8xxxu: Use a longer retry limit of 48 wifi: rtl8xxxu: Report the RSSI to the firmware ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-19soc: mediatek: pm-domains: Add support for mt8188Garmin.Chang1-0/+121
Add domain control data including bus protection data size change due to more protection steps in mt8188. Signed-off-by: Garmin.Chang <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-01-17Merge wireless into wireless-nextKalle Valo3-0/+21
Due to the two cherry picked commits from wireless to wireless-next we have several conflicts in mt76. To avoid any bugs with conflicts merge wireless into wireless-next. 96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
2023-01-17net: ethernet: mtk_wed: add reset/reset_complete callbacksLorenzo Bianconi1-0/+2
Introduce reset and reset_complete wlan callback to schedule WLAN driver reset when ethernet/wed driver is resetting. Tested-by: Daniel Golle <[email protected]> Co-developed-by: Sujuan Chen <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-01-16cpufreq: remove s3c24xx driversArnd Bergmann1-299/+0
All s3c24xx platforms were removed, so these five drivers are all obsolete now. Reviewed-by: Krzysztof Kozlowski <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-16ARM: s3c: remove adc.cArnd Bergmann1-32/+0
This driver could not be enabled on s3c64xx for a long time because of the ARCH_MULTIPLATFORM dependency, so remove it. Acked-by: Mark Brown <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann1-58/+0
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Acked-by: Miquel Raynal <[email protected]> Acked-by: Ulf Hansson <[email protected]> Acked-by: Stephen Boyd <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-16ARM: mmp: remove old PM supportArnd Bergmann1-23/+1
Assuming that we don't actually want the old-style pm-mmp2.c and pm-pxa910.c implementation, all these files can go away as well. Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-12ARM: omap1: remove dead codeArnd Bergmann1-35/+0
After the removal of the unused board files, I went through the omap1 code to look for code that no longer has any callers and remove that. In particular, support for the omap7xx/omap8xx family is now completely unused, so I'm only leaving omap15xx/omap16xx/omap59xx. Cc: Aaro Koskinen <[email protected]> Cc: Janusz Krzysztofik <[email protected]> Cc: [email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Acked-by: Tony Lindgren <[email protected]> Acked-by: Kevin Hilman <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-10ARM: omap1: fix !ARCH_OMAP1_ANY link failuresArnd Bergmann1-2/+2
While compile-testing randconfig builds for the upcoming boardfile removal, I noticed that an earlier patch of mine was completely broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced one set of build failures with another one, now resulting in link failures like ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe': drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority' ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources': drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma' drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info' ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma': drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status' I tried reworking it, but the resulting patch ended up much bigger than simply avoiding the original problem of unused-function warnings like arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable] As a result, revert the previous fix, and rearrange the code that produces warnings to hide them. For mcbsp, the #ifdef check can simply be removed as the cpu_is_omapxxx() checks already achieve the same result, while in the io.c the easiest solution appears to be to merge the common map bits into each soc specific portion. This gets cleaned in a nicer way after omap7xx support gets dropped, as the remaining SoCs all have the exact same I/O map. Fixes: 615dce5bf736 ("ARM: omap1: fix build with no SoC selected") Cc: [email protected] Acked-by: Aaro Koskinen <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-06soc: qcom: apr: make remove callback of apr driver void returnedDawei Li1-1/+1
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. As such, change the remove function for apr bus based drivers to return void. Signed-off-by: Dawei Li <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/TYCP286MB23232B7968D34DB8323B0F16CAFB9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
2022-12-28clk: qcom: smd-rpm: remove duplication between MMXI and MMAXI definesDmitry Baryshkov1-1/+0
The commit 644c42295592 ("clk: qcom: smd: Add SM6375 clocks") added a duplicate of the existing define QCOM_SMD_RPM_MMAXI_CLK, drop it now. Fixes: 644c42295592 ("clk: qcom: smd: Add SM6375 clocks") Reviewed-by: Alex Elder <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-21Merge tag 'mt76-for-kvalo-2022-12-09' of https://github.com/nbd168/wirelessKalle Valo1-1/+0
mt76 patches for 6.2 - fixes - per-PHY LED support
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds1-5/+116
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-13Merge tag 'regulator-v6.2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a quiet release for regulator, the diffstat is dominated by the I2C migration to probe_new() and the newly added MT6357 driver. We've just one framework addition and the rest is all new device support, fixes and cleanups. The framework addition is an API for requesting all regulators defined in DT, this isn't great practice but has reasonable applications when there is generic code handling devices on buses where the bus specification doesn't include power. The immediate application is MDIO but I believe there's others, it's another API that'll need an eye keeping on it for undesirable usage. Summary: - An API for requesting all regulators defined in DT - Conversion of lots of drivers to the I2C probe_new() API - Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek RT6190" * tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits) regulator: core: Use different devices for resource allocation and DT lookup dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() regulator: add mt6357 regulator regulator: dt-bindings: Add binding schema for mt6357 regulators regulator: core: fix resource leak in regulator_register() regulator: core: fix module refcount leak in set_supply() regulator: core: fix use_count leakage when handling boot-on regulator: rk808: Use dev_err_probe regulator: rk808: reduce 'struct rk808' usage regulator: Drop obsolete dependencies on COMPILE_TEST regulator: pv88080-regulator: Convert to i2c's .probe_new() regulator: pfuze100-regulator: Convert to i2c's .probe_new() regulator: isl6271a-regulator: Convert to i2c's .probe_new() regulator: fan53555: Convert to i2c's .probe_new() regulator: act8865-regulator: Convert to i2c's .probe_new() regulator: qcom-rpmh: Add support for PM8550 regulators regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550 regulator: tps65023-regulator: Convert to i2c's .probe_new() regulator: tps62360-regulator: Convert to i2c's .probe_new() ...
2022-12-09wifi: mt76: mt7915: get rid of wed rx_buf_ring page_frag_cacheLorenzo Bianconi1-1/+0
Since wed rx_buf_ring page_frag_cache is no longer used in a hot path, remove it and rely on page allocation APIs in mt7915_mmio_wed_init_rx_buf() and mt7915_mmio_wed_release_rx_buf() Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2022-12-07Merge tag 'qcom-drivers-for-6.2-2' of ↵Arnd Bergmann1-0/+12
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for 6.2 Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550. Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver. Support for SM8550 and SM4250 ARC regulators are added to the RPM(h) power-domain drivers. SM8550 support is added to the LLCC driver. The AOSS QMP binding is declared compatible for SM8550. BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built properly. * tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155 dt-bindings: soc: qcom: apr: document generic qcom,apr compatible soc: qcom: Select REMAP_MMIO for ICC_BWMON driver soc: qcom: Select REMAP_MMIO for LLCC driver soc: qcom: rpmpd: Add SM4250 support dt-bindings: power: rpmpd: Add SM4250 support dt-bindings: soc: qcom: aoss: Add compatible for SM8550 soc: qcom: llcc: Add configuration data for SM8550 dt-bindings: arm: msm: Add LLCC compatible for SM8550 soc: qcom: llcc: Add v4.1 HW version support soc: qcom: socinfo: Add SM8550 ID soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets soc: qcom: rpmhpd: Add SM8550 power domains dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-12-06net: ethernet: mtk_wed: add reset to rx_ring_setup callbackLorenzo Bianconi1-4/+4
This patch adds reset parameter to mtk_wed_rx_ring_setup signature in order to align rx_ring_setup callback to tx_ring_setup one introduced in 'commit 23dca7a90017 ("net: ethernet: mtk_wed: add reset to tx_ring_setup callback")' Co-developed-by: Sujuan Chen <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/29c6e7a5469e784406cf3e2920351d1207713d05.1670239984.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-05soc: qcom: llcc: Add configuration data for SM8550Abel Vesa1-0/+12
Add LLCC configuration data for SM8550 SoC. Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-11-29net: ethernet: mtk_wed: add reset to tx_ring_setup callbackLorenzo Bianconi1-4/+4
Introduce reset parameter to mtk_wed_tx_ring_setup signature. This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Co-developed-by: Sujuan Chen <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-11-29net: ethernet: mtk_wed: update mtk_wed_stopLorenzo Bianconi1-0/+4
Update mtk_wed_stop routine and rename old mtk_wed_stop() to mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Co-developed-by: Sujuan Chen <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-11-28net: ethernet: mtk_wed: add wcid overwritten support for wed v1Sujuan Chen1-0/+3
All wed versions should enable the wcid overwritten feature, since the wcid size is controlled by the wlan driver. Tested-by: Sujuan Chen <[email protected]> Co-developed-by: Bo Jiao <[email protected]> Signed-off-by: Bo Jiao <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-11net: ethernet: mtk_wed: add configure wed wo supportLorenzo Bianconi1-1/+75
Enable RX Wireless Ethernet Dispatch available on MT7986 Soc. Tested-by: Daniel Golle <[email protected]> Co-developed-by: Sujuan Chen <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-11net: ethernet: mtk_wed: rename tx_wdma array in rx_wdmaLorenzo Bianconi1-1/+2
Rename tx_wdma queue array in rx_wdma since this is rx side of wdma soc. Moreover rename mtk_wed_wdma_ring_setup routine in mtk_wed_wdma_rx_ring_setup() Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-11net: ethernet: mtk_wed: introduce wed mcu supportSujuan Chen1-0/+29
Introduce WED mcu support used to configure WED WO chip. This is a preliminary patch in order to add RX Wireless Ethernet Dispatch available on MT7986 SoC. Tested-by: Daniel Golle <[email protected]> Co-developed-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-09regulator: qcom_smd: Add PMR735a regulatorsKonrad Dybcio1-0/+2
PMR735a is already supported in the RPMH regulator driver, but there are cases where it's bundled with SMD RPM SoCs. Port it over to qcom_smd-regulator to enable usage in such cases. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-08soc: mediatek: Add all settings to mtk_mmsys_ddp_dpi_fmt_config funcXinlei Lee1-0/+7
The difference between MT8186 and other ICs is that when modifying the output format, we need to modify the mmsys_base+0x400 register to take effect. So when setting the dpi output format, we need to call mtk_mmsys_ddp_dpi_fmt_config to set it to MT8186 synchronously. Commit a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi output for MT8186") lacked some of the possible output formats and also had a wrong bitmask. Add the missing output formats and fix the bitmask. While at it, also update mtk_mmsys_ddp_dpi_fmt_config() to use generic formats, so that it is slightly easier to extend for other platforms. Fixes: a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi output for MT8186") Signed-off-by: Xinlei Lee <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: CK Hu <[email protected]> Reviewed-by: Nícolas F. R. A. Prado <[email protected]> Signed-off-by: Matthias Brugger <[email protected]>
2022-10-08Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have some late breaking reports that a patch series to rework clk rate range support broke boot on some devices, so I've left that branch out of this. Hopefully we can get to that next week, or punt on it and let it bake another cycle. That means we don't really have any changes to the core framework this time around besides a few typo fixes. Instead this is all clk driver updates and fixes. The usual suspects are here (again), with Qualcomm dominating the diffstat. We look to have gained support for quite a few new Qualcomm SoCs and Dmitry worked on updating many of the existing Qualcomm drivers to use clk_parent_data. After that we have MediaTek drivers getting some much needed updates, in particular to support GPU DVFS. There are also quite a few Samsung clk driver patches, but that's mostly because there was a maintainer change and so last release we missed some of those patches. Overall things look normal, but I'm slowly reviewing core framework code nowadays and that shows given the rate range patches had to be yanked last minute. Let's hope this situation changes soon. New Drivers: - Support for Renesas VersaClock7 clock generator family - Add Spreadtrum UMS512 SoC clk support - New clock drivers for MediaTek Helio X10 MT6795 - Display clks for Qualcomm SM6115, SM8450 - GPU clks for Qualcomm SC8280XP - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers Deleted Drivers: - Remove DaVinci DM644x and DM646x clk driver support Updates: - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - More devm helpers for fixed rate registration - Various PXA168 clk driver fixes - Add resets for MediaTek MT8195 PCIe and USB - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging - Add missing DPI1_HDMI clock in MT8195 VDOSYS1 - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195 - Fix GPU clock topology on MT8195 - Propogate rate changes from GPU clock gate up the tree - Clock mux notifiers for GPU-related PLLs - Conversion of more "simple" drivers to mtk_clk_simple_probe() - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers - Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek - Shrink MT8192 clock driver by deduplicating clock parent lists - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk' clocks for i.MX8MP - Drop unnecessary newline in i.MX8MM dt-bindings - Add more MU1 and SAI clocks dt-bindings Ids - Introduce slice busy bit check for i.MX93 composite clock - Introduce white list bit check for i.MX93 composite clock - Add new i.MX93 clock gate - Add MU1 and MU2 clocks to i.MX93 clock provider - Add SAI IPG clocks to i.MX93 clock provider - add generic clocks for U(S)ART available on SAMA5D2 SoCs - reset controller support for Polarfire clocks - .round_rate and .set rate support for clk-mpfs - code cleanup for clk-mpfs - PLL support for PolarFire SoC's Clock Conditioning Circuitry - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8 - Add I2C clocks and resets on RZ/V2M - Document clock support for the RZ/Five SoC - mux-variant clock using the table variant to select parents - clock controller for the rv1126 soc - conversion of rk3128 to yaml and relicensing of the yaml bindings to gpl2+MIT (following dt-binding guildelines) - Exynos7885: add FSYS, TREX and MFC clock controllers - Exynos850: add IS and AUD (audio) clock controllers with bindings - ExynosAutov9: add FSYS clock controllers with bindings - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock controllers, due to duplicated entries. This is an acceptable ABI break: recently developed/added platform so without legacies, acked by known users/developers - ExynosAutov9: add few missing Peric 0/1 gates - ExynosAutov9: correct register offsets of few Peric 0/1 clocks - Minor code improvements (use of_device_get_match_data() helper, code style) - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he already maintainers that architecture/platform - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration - Qualcomm SDM660 SDCC1 moved to floor clk ops - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was added/fixed - The Qualcomm MSM8996 CPU clocks are updated with support for ACD - Support for Qualcomm SDM670 GCC and RPMh clks was added - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for num_parents was done for many Qualcomm SoCs - Support for per-reset defined delay on Qualcomm was introduced" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: ast2600: BCLK comes from EPLL clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: nxp: fix typo in comment clk: pxa: add a check for the return value of kzalloc() clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: imx: scu: fix memleak on platform_device_add() fails clk: vc5: Use regmap_{set,clear}_bits() where appropriate ...
2022-10-06Merge tag 'arm-drivers-6.1' of ↵Linus Torvalds7-11/+60
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...
2022-09-27clk: qcom: smd: Add SM6375 clocksKonrad Dybcio1-0/+1
Add support for controlling SMD RPM clocks on SM6375. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-23Merge tag 'qcom-drivers-for-6.1' of ↵Arnd Bergmann2-10/+40
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for 6.1 The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth on SDM845 and SC7280. The LLCC driver is extended to provide per-platform register mappings to the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the passed qmi_elem_info to be const. Support for SDM845 is added to the sleep stats driver. Power-domains for the SM6375 platform is added to RPMPD and the platform is added to socinfo, together with the PM6125 pmic id. A couple of of_node reference issues are corrected in the smem state and smsm drivers. The Qualcomm SCM driver binding is converted to YAML. * tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits) soc: qcom: rpmpd: Add SM6375 support dt-bindings: power: rpmpd: Add SM6375 power domains firmware: qcom: scm: remove unused __qcom_scm_init declaration dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails soc: qcom: icc-bwmon: force clear counter/irq registers soc: qcom: icc-bwmon: add support for sc7280 LLCC BWMON dt-bindings: interconnect: qcom,msm8998-bwmon: Add support for sc7280 BWMONs soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version soc: qcom: qmi: use const for struct qmi_elem_info soc: qcom: icc-bwmon: remove redundant ret variable dt-bindings: soc: qcom: stats: Document SDM845 compatible soc: qcom: stats: Add SDM845 stats config and compatible dt-bindings: firmware: document Qualcomm SM6115 SCM soc: qcom: Make QCOM_RPMPD depend on OF dt-bindings: firmware: convert Qualcomm SCM binding to the yaml soc: qcom: socinfo: Add PM6125 ID soc: qcom: socinfo: Add an ID for SM6375 soc: qcom: smem_state: Add refcounting for the 'state->of_node' soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-09-23Merge tag 'v6.0-next-soc' of ↵Arnd Bergmann2-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers pmic-wrapper: - add support for mt8188 SVS: - several driver cleanups power-domain: - several cleanups of the dt-bindings and driver mutex: - add support to mt6795 disp mutex - add support for mt8186 mdp3 mutex * tag 'v6.0-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: Add mmsys func to adapt to dpi output for MT8186 soc: mediatek: mutex: Add support for MT6795 Helio X10 display mutex dt-bindings: soc: mediatek: Add display mutex support for MT6795 soc: mediatek: mutex: Add mt8186 mutex mod settings for mdp3 dt-bindings: soc: mediatek: Add mdp3 mutex support for mt8186 soc: mediatek: pm-domains: Simplify some error message soc: mediatek: mtk-svs: Explicitly include bitfield header soc: mediatek: mtk-svs: Use bitfield access macros where possible soc: mediatek: mtk-svs: Commonize t-calibration-data fuse array read dt-bindings: power: mediatek: Update maintainer list dt-bindings: power: mediatek: Support naming power controller node with unit address dt-bindings: power: mediatek: Refine multiple level power domain nodes soc: mediatek: mtk-svs: Use devm variant for dev_pm_opp_of_add_table() soc: mediatek: mtk-svs: Drop of_match_ptr() for of_match_table soc: mediatek: mtk-svs: Remove hardcoded irqflags soc: mediatek: mtk-svs: Switch to platform_get_irq() dt-bindings: soc: mediatek: pwrap: add compatible for mt8188 soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-09-23Merge tag 'sunxi-drivers-for-6.1-1' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers sunxi SRAM driver changes: - minor code refactor - support for Allwinner D1 * tag 'sunxi-drivers-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: sunxi: sram: Fix debugfs info for A64 SRAM C soc: sunxi: sram: Fix probe function ordering issues soc: sunxi: sram: Prevent the driver from being unbound soc: sunxi: sram: Actually claim SRAM regions Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-09-22net: ethernet: mtk_eth_wed: add axi bus supportLorenzo Bianconi1-1/+10
Other than pcie bus, introduce support for axi bus to mtk wed driver. Axi bus is used to connect mt7986-wmac soc chip available on mt7986 device. Tested-by: Daniel Golle <[email protected]> Co-developed-by: Bo Jiao <[email protected]> Signed-off-by: Bo Jiao <[email protected]> Co-developed-by: Sujuan Chen <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-09-22net: ethernet: mtk_eth_wed: add wed support for mt7986 chipsetLorenzo Bianconi1-0/+8
Introduce Wireless Etherne Dispatcher support on transmission side for mt7986 chipset Tested-by: Daniel Golle <[email protected]> Co-developed-by: Bo Jiao <[email protected]> Signed-off-by: Bo Jiao <[email protected]> Co-developed-by: Sujuan Chen <[email protected]> Signed-off-by: Sujuan Chen <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-09-18soc: sunxi: sram: Return void from the release functionSamuel Holland1-1/+1
There is no point in returning an error here, as the caller can do nothing about it. In fact, all callers already ignore the return value. Acked-by: Jernej Skrabec <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jernej Skrabec <[email protected]>
2022-09-17soc: apple: rtkit: Add apple_rtkit_pollHector Martin1-0/+12
This allows a client to receive messages in atomic context, by polling. Signed-off-by: Hector Martin <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]> Reviewed-by: Sven Peter <[email protected]> Reviewed-by: Eric Curtin <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2022-09-15soc: mediatek: Add mmsys func to adapt to dpi output for MT8186Xinlei Lee1-0/+2
Add mmsys func to manipulate dpi output format config for MT8186. Co-developed-by: Jitao Shi <[email protected]> Signed-off-by: Jitao Shi <[email protected]> Signed-off-by: Xinlei Lee <[email protected]> Reviewed-by: Nís F. R. A. Prado <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Matthias Brugger <[email protected]>
2022-08-31soc: mediatek: mutex: Add mt8186 mutex mod settings for mdp3Allen-KH Cheng1-0/+2
Add mt8186 mutex mod settings for mdp3. Co-developed-by: Xiandong Wang <[email protected]> Signed-off-by: Xiandong Wang <[email protected]> Signed-off-by: Allen-KH Cheng <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2022-08-30memory: mtk-smi: Add enable IOMMU SMC command for MM masterChengci.Xu1-0/+3
For concerns about security, the register to enable/disable IOMMU of SMI LARB should only be configured in secure world. Thus, we add some SMC command for multimedia master to enable/disable MM IOMMU in ATF by setting the register of SMI LARB. This function is prepared for MT8188. Signed-off-by: Chengci.Xu <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29Merge tag '[email protected]' into ↵Bjorn Andersson1-0/+30
drivers-for-6.1 v6.0-rc1 + [email protected] + [email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2022-08-29soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driverManivannan Sadhasivam1-0/+30
The LLCC EDAC register offsets varies between each SoCs. Until now, the EDAC driver used the hardcoded register offsets. But this caused crash on SM8450 SoC where the register offsets has been changed. So to avoid this crash and also to make it easy to accommodate changes for new SoCs, let's pass the LLCC version specific register offsets to the EDAC driver. Currently, two set of offsets are used. One is starting from LLCC version v1.0.0 used by all SoCs other than SM8450. For SM8450, LLCC version starting from v2.1.0 is used. Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Sai Prakash Ranjan <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-29soc: qcom: qmi: use const for struct qmi_elem_infoJeff Johnson1-10/+10
Currently all usage of struct qmi_elem_info, which is used to define the QMI message encoding/decoding rules, does not use const. This prevents clients from registering const arrays. Since these arrays are always pre-defined, they should be const, so add the const qualifier to all places in the QMI interface where struct qmi_elem_info is used. Once this patch is in place, clients can independently update their pre-defined arrays to be const, as demonstrated in the QMI sample code. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds3-27/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-06-17soc: mediatek: mutex: add functions that operate registers by CMDQMoudy Ho1-0/+2
Due to HW limitations, MDP3 is necessary to enable MUTEX in each frame for SOF triggering and cooperate with CMDQ control to reduce the amount of interrupts generated(also, reduce frame latency). In response to the above situation, a new interface "mtk_mutex_enable_by_cmdq" has been added to achieve the purpose. Signed-off-by: Moudy Ho <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Rex-BC Chen <[email protected]> Reviewed-by: CK Hu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.