aboutsummaryrefslogtreecommitdiff
path: root/include/linux/pci_ids.h
AgeCommit message (Collapse)AuthorFilesLines
2008-05-24serial: support for InstaShield IS-400 four port RS-232 PCI cardIgnacio García Pérez1-0/+1
Add support for the InstaShield IS-400 four port RS-232 PCI card. Signed-off-by: Ignacio García Pérez <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-05-24i5k_amb: support Intel 5400 chipsetDarrick J. Wong1-0/+3
Minor rework to support the Intel 5400 chipset. Signed-off-by: Darrick J. Wong <[email protected]> Cc: "Mark M. Hoffman" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-05-01jsm: add new supported board to jsm serial driverScott Kilau1-0/+1
Add new PCI Express Neo/JSM board to the supported list of drivers in the JSM driver. Signed-off-by: Scott Kilau <[email protected]> Acked-by: Ananda V <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-04-23PCI: Add Intel SCH PCI IDsAlek Du1-0/+2
This patch adds Intel SCH chipsets (US15W, US15L, UL11L) PCI IDs, these IDs will be used by following SCH driver patches. Signed-off-by: Alek Du <[email protected]> Signed-off-by: Jesse Barnes <jbarnes@jbarnes-t61.(none)>
2008-03-10memstick: add support for JMicron jmb38x MemoryStick host controllerAlex Dubov1-0/+1
Signed-off-by: Alex Dubov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-02-21PCI: pci_ids: patch for Intel ICH10 DeviceID'sJason Gaston1-0/+6
This patch adds the Intel ICH10 LPC and SMBus Controller DeviceID's. Signed-off-by: Jason Gaston <[email protected]> Cc: Jean Delvare <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2008-02-19via82cxxx: add new PCI id for cx700Andrew Smith1-0/+1
[bart: manually ported it over via82cxxx changes] From: Andrew Smith <[email protected]> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
2008-02-06parport: add support for the Quatech SPPXP-100 Parallel port PCI ExpressCardLuís P Mendes1-0/+1
Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to include/linux/pci_id.h Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard [[email protected]: build fix] Signed-off-by: Luís P Mendes <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-02-05serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.hKrauth.Julien1-0/+17
Add ADDI-DATA GmbH communication cards to 8250_pci driver. Supported cards are: APCI-7300, APCI-7420, APCI-7500, APCI-7800 APCI-7300-2, APCI-7420-2, APCI-7500-2 APCI-7300-3, APCI-7420-3, APCI-7500-3, APCI-7800-3 [[email protected]: coding-style fixes] Signed-off-by: Krauth J. <[email protected]> Cc: Russell King <[email protected]> Cc: Alan Cox <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-01-30pci: add PCI identifiers for the RDC devicesFlorian Fainelli1-0/+7
This patch defines the PCI identifiers found in the RDC R-321x System-on-Chip. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]>
2008-01-28Add rtl8180 wireless driverMichael Wu1-0/+3
This patch adds a mac80211 based wireless driver for the rtl8180 and rtl8185 PCI wireless cards. Also included are some rtl8187 changes required due to the relationship between that driver and this one. Michael Wu is primarily responsible for the initial driver and rtl8185 support. Andreas Merello provided the additional rtl8180 support. Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very helpful for the rtl8225z2 code. The Signed-off-by information below is collected from the individual patches submitted to wireless-2.6 before merging this driver upstream. Signed-off-by: Andrea Merello <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Pavel Roskin <[email protected]> Signed-off-by: Michael Wu <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2008-01-28r6040: cleanupsFrancois Romieu1-1/+0
- whitespaces vs tabs - use 80 cols - use if_mii - use netdev_priv - remove useless cast to void * - PCI device id does not need to be globally available Signed-off-by: Francois Romieu <[email protected]>
2008-01-28drivers/net/r6040: fix obvious problems (but more remain)Jeff Garzik1-0/+3
- checkpatch fixes - fix bogus and uninitialized return codes in r6040_start_xmit() - netdev_get_settings() fix obvious locking bug flagged by compiler warning - set DMA consistent mask - remove unnecessary setting of dev->base_addr Signed-off-by: Jeff Garzik <[email protected]>
2008-01-28add bnx2x driver for BCM57710Eliezer Tamir1-0/+1
Signed-off-by: Eliezer Tamir <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2008-01-23ata_generic: Cenatek supportAlan Cox1-0/+3
Not much to do here. It's an ata memory as disk. Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2008-01-11ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9Zhao Yakui1-0/+2
It is important that these resources be reserved to avoid conflicts with well known ACPI registers. Signed-off-by: Zhao Yakui <[email protected]> Signed-off-by: Len Brown <[email protected]>
2007-12-12sdhci: support JMicron JMB38x chipsPierre Ossman1-0/+1
The JMicron JMB38x chip doesn't support transfers that aren't 32-bit aligned (both size and start address). It also doesn't like switching between PIO and DMA mode, so it needs to be reset after each request. Signed-off-by: Pierre Ossman <[email protected]>
2007-11-23forcedeth: new mcp79 pci idsAyaz Abdulla1-0/+4
This patch adds new device ids and features for mcp79 devices into the forcedeth driver. Signed-off-by: Ayaz Abdulla <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2007-11-14I/OAT: Add support for version 2 of ioatdma deviceShannon Nelson1-0/+1
Add support for version 2 of the ioatdma device. This device handles the descriptor chain and DCA services slightly differently: - Instead of moving the dma descriptors between a busy and an idle chain, this new version uses a single circular chain so that we don't have rewrite the next_descriptor pointers as we add new requests, and the device doesn't need to re-read the last descriptor. - The new device has the DCA tags defined internally instead of needing them defined statically. Signed-off-by: Shannon Nelson <[email protected]> Cc: "Williams, Dan J" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2007-11-08hwmon: (i5k_amb) New memory temperature sensor driverDarrick J. Wong1-0/+3
New driver to read FB-DIMM temperature sensors on systems with the Intel 5000 series chipsets. Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Mark M. Hoffman <[email protected]>
2007-11-05PCI: Remove 3 incorrect MSI quirks.David Miller1-3/+0
Now that we have dealt with the real issue, in that some ATI SATA and USB controllers needed the INTX_DISABLE quirk, we can remove these AMD chipset global MSI disabling quirks. This reverts three changesets: 4be8f906435a6af241821ab5b94b2b12cb7d57d8 (PCI: disable MSI on RS690) aea6a433f50cd89b9cbd10850fd0b32f961f9883 (PCI: disable MSI on RD580) f122392f679ebed39db08074f935d770504623eb (PCI: disable MSI on RX790) This is based upon testing and feedback from Shane Huang <[email protected]>. Cc: Shane Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Acked-by: Jeff Garzik <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2007-11-05PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge.David Miller1-0/+1
This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008dedff4bdc96a5f67224cd3d8d12237082a0: "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by: Michael Chan <[email protected]> Cc: Anantha Subramanyam <[email protected]> Cc: Naren Sankar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Acked-by: Jeff Garzik <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2007-11-05PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 ↵David Miller1-1/+0
chips" This reverts commit e3008dedff4bdc96a5f67224cd3d8d12237082a0. The real bug was an INTX issue in the tg3 ethernet chip, and cured by commit c129d962a66c76964954a98b38586ada82cf9381 Signed-off-by: David S. Miller <[email protected]> Acked-by: Jeff Garzik <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2007-10-25[netdrvr] forcedeth: add MCP77 device IDsAyaz Abdulla1-0/+4
Signed-off-by: Jeff Garzik <[email protected]>
2007-10-22[TG3]: Add 5723 supportMatt Carlson1-0/+1
This patch adds support for upcoming 5723 devices. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2007-10-16I/OAT: New device idsShannon Nelson1-0/+2
Add device ids for new revs of the Intel I/OAT DMA engine Signed-off-by: Shannon Nelson <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2007-10-168250_pci: Autodetect mainpine cardsAlan Cox1-0/+2
Add support for a whole range of boards. Some are partly autodetected but not fully correctly others (PCI Express notably) not at all. Stick all the right entries in. Thanks to Mainpine for information and testing. Signed-off-by: Alan Cox <[email protected]> Cc: Russell King <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2007-10-15Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+1
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
2007-10-15[ARM] 4577/1: ITE 8152 PCI bridge supportMike Rapoport1-0/+1
This patch provides driver for ITE 8152 PCI bridge. Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Russell King <[email protected]>
2007-10-15Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-0/+5
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits) [SCSI] gdth: fix CONFIG_ISA build failure [SCSI] esp_scsi: remove __dev{init,exit} [SCSI] gdth: !use_sg cleanup and use of scsi accessors [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2 [SCSI] gdth: Setup proper per-command private data [SCSI] gdth: Remove gdth_ctr_tab[] [SCSI] gdth: switch to modern scsi host registration [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes [SCSI] gdth: clean up host private data [SCSI] gdth: Remove virt hosts [SCSI] gdth: Reorder scsi_host_template intitializers [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers [SCSI] gdth: Remove 2.4.x support, in-kernel changelog [SCSI] gdth: split out pci probing [SCSI] gdth: split out eisa probing [SCSI] gdth: split out isa probing gdth: Make one abuse of scsi_cmnd less obvious [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE ...
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds1-0/+3
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits) PCI: merge almost all of pci_32.h and pci_64.h together PCI: X86: Introduce and enable PCI domain support PCI: Add 'nodomains' boot option, and pci_domains_supported global PCI: modify PCI bridge control ISA flag for clarity PCI: use _CRS for PCI resource allocation PCI: avoid P2P prefetch window for expansion ROMs PCI: skip ISA ioresource alignment on some systems PCI: remove transparent bridge sizing pci: write file size to inode on proc bus file write pci: use size stored in proc_dir_entry for proc bus files pci: implement "pci=noaer" PCI: fix IDE legacy mode resources MSI: Use correct data offset for 32-bit MSI in read_msi_msg() PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code PCI: i386: Compaq EVO N800c needs PCI bus renumbering PCI: Remove no longer correct documentation regarding MSI vector assignment PCI: re-enable onboard sound on "MSI K8T Neo2-FIR" PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read ...
2007-10-12i386: add support for picopower irq routerThomas Backlund1-0/+3
Add support for PicoPower PT86C523 IRQ router to be used with the in-kernel yenta driver for CardBus. With this patch cardbus works on e.g. Dell Latitude XPi P150CD. Initial patch for kernel 2.4 series by Sune Mølgaard http://molgaard.org/code/linux-2.4.31-picopower.patch Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com) Testing and confirmation that it works by Austin Acton Cleaned up a little for inclusion in a 2.6.21-rc7 based kernel. Added some more cleanups according to CodingStyle, as noted by Randy Dunlap on LKML. [[email protected]: build fixes] Signed-off-by: Thomas Backlund <[email protected]> Cc: Andi Kleen <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2007-10-12x86: HPET force enable for ICH5Venki Pallipadi1-0/+1
force_enable hpet for ICH5. [ Build fixes from Andrew Morton ] Signed-off-by: Venkatesh Pallipadi <[email protected]> Cc: Andi Kleen <[email protected]> Cc: john stultz <[email protected]> Cc: Greg KH <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]>
2007-10-12[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other fixesNick Cheng1-0/+3
Description: ** support ARC1200/1201/1202 SATA RAID adapter, which is named ACB_ADAPTER_TYPE_B ** modify the arcmsr_pci_slot_reset function ** modify the arcmsr_pci_ers_disconnect_forepart function ** modify the arcmsr_pci_ers_need_reset_forepart function  Signed-off-by: Nick Cheng <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2007-10-12[SCSI] Addition to pci_ids.h for ATTO Technology, Inc.Eric Moore1-0/+2
A new PCI_VENDOR_ID for pci_ids.h. signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2007-10-11Merge branch 'master' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11Merge branch 'master' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits) [SKY2]: status polling loop (post merge) [NET]: Fix NAPI completion handling in some drivers. [TCP]: Limit processing lost_retrans loop to work-to-do cases [TCP]: Fix lost_retrans loop vs fastpath problems [TCP]: No need to re-count fackets_out/sacked_out at RTO [TCP]: Extract tcp_match_queue_to_sack from sacktag code [TCP]: Kill almost unused variable pcount from sacktag [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L [TCP]: Add bytes_acked (ABC) clearing to FRTO too [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2 [NETFILTER]: x_tables: add missing ip6t_modulename aliases [NETFILTER]: nf_conntrack_tcp: fix connection reopening [QETH]: fix qeth_main.c [NETLINK]: fib_frontend build fixes [IPv6]: Export userland ND options through netlink (RDNSS support) [9P]: build fix with !CONFIG_SYSCTL [NET]: Fix dev_put() and dev_hold() comments [NET]: make netlink user -> kernel interface synchronious [NET]: unify netlink kernel socket recognition [NET]: cleanup 3rd argument in netlink_sendskb ... Fix up conflicts manually in Documentation/feature-removal-schedule.txt and my new least favourite crap, the "mod_devicetable" support in the files include/linux/mod_devicetable.h and scripts/mod/file2alias.c. (The latter files seem to be explicitly _designed_ to get conflicts when different subsystems work with them - that have an absolutely horrid lack of subsystem separation!) Signed-off-by: Linus Torvalds <[email protected]>
2007-10-11Merge branch 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds1-0/+5
* 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-block: (37 commits) [BLOCK] Fix failing compile with BLK_DEV_IO_TRACE=n compat_ioctl: move floppy handlers to block/compat_ioctl.c compat_ioctl: move cdrom handlers to block/compat_ioctl.c compat_ioctl: move BLKPG handling to block/compat_ioctl.c compat_ioctl: move hdio calls to block/compat_ioctl.c compat_ioctl: handle blk_trace ioctls compat_ioctl: add compat_blkdev_driver_ioctl() compat_ioctl: move common block ioctls to compat_blkdev_ioctl Sysace: Don't enable IRQ until after interrupt handler is registered Sysace: sparse fixes Sysace: Minor coding convention fixup drivers/block/umem: use DRIVER_NAME where appropriate drivers/block/umem: trim trailing whitespace drivers/block/umem: minor cleanups drivers/block/umem: use dev_printk() drivers/block/umem: move private include away from include/linux Sysace: Labels in C code should not be indented. Sysace: Add of_platform_bus binding Sysace: Move IRQ handler registration to occur after FSM is initialized Sysace: minor rework and cleanup changes ...
2007-10-10[TG3]: Add 5761 supportMatt Carlson1-0/+2
This patch adds rest of the miscellaneous code required to support the 5761. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2007-10-10[TG3]: Add 5784 and 5764 support.Matt Carlson1-0/+2
This patch adds the support for 5784 and 5764 devices. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2007-10-10[NET]: Add Tehuti network driver.Andy Gospodarek1-0/+5
[ Ported to napi_struct changes... -DaveM ] Signed-off-by: David S. Miller <[email protected]>
2007-10-10[IPG]: add IP1000A driver to kernel treeFrancois Romieu1-0/+2
Signed-off-by: Jesse Huang <[email protected]> Signed-off-by: Stefan Lippers-Hollmann <[email protected]> Signed-off-by: Francois Romieu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2007-10-10drivers/block/umem: move private include away from include/linuxJeff Garzik1-0/+5
Move include/linux/umem.h to drivers/block, as umem.c is the only user, and its not an exported header. Move the PCI_{VENDOR,DEVICE}_ID_* constants to include/linux/pci_ids.h. Signed-off-by: Jeff Garzik <[email protected]>
2007-10-08[POWERPC] Treat 8610 PCIe host bridge as transparentJason Jin1-0/+1
Signed-off-by: Jason Jin <[email protected]> Signed-off-by: Jon Loeliger <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2007-10-03mmc: Disabler for Ricoh MMC controllerPhilip Langdale1-0/+2
Thanks to Matt Domsch and Rezwanul Kabir at Dell, we know how to disable the MMC controller on the multi-function Ricoh R5C832. The MMC controller needs to be disabled or it will steal MMC cards from the SD controller where they would otherwise be supported by the Linux SDHCI driver. Signed-off-by: Philipl Langdale <[email protected]> Signed-off-by: Pierre Ossman <[email protected]>
2007-09-14[POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS portKumar Gala1-0/+2
Added basic board port for MPC8572 DS reference platform that is similiar to the MPC8544/33 DS reference platform in uniprocessor mode. Signed-off-by: Kumar Gala <[email protected]>
2007-09-11PCI: irq and pci_ids patch for Intel TolapaiJason Gaston1-0/+2
This patch adds the Intel Tolapai LPC and SMBus Controller DID's. Signed-off-by: Jason Gaston <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2007-09-10[libata, IDE] add new VIA bridge to VIA PATA driversJoseph Chan1-0/+1
Signed-off-by: Joseph Chan <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2007-08-31i2c-piix4: Fix SB700 PCI device IDShane Huang1-2/+1
We find that SB700 and SB800 use the same SMBus device ID as SB600, which is 0x4385, instead of the already submitted 0x4395. Besides removing the wrong SB700 device ID, add SB800 support to kernel, by renaming the PCI_DEVICE_ID_ATI_IXP600_SMBUS into PCI_DEVICE_ID_ATI_SBX00_SMBUS. Signed-off-by: Shane Huang <[email protected]> Signed-off-by: Jean Delvare <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2007-08-25Merge branch 'agp-patches' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp: balance ioremap checks agp: Add device id for P4M900 to via-agp module efficeon-agp leaks 'struct agp_bridge_data' in error paths of agp_efficeon_probe()
Powered by cgit, Gruvboxed by Blaster4385.