| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that all drivers are converted to the (new) .probe() callback, the
temporary .probe_new() can go away. \o/
Link: https://lore.kernel.org/linux-i2c/[email protected]
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Add i2c_get_match_data() to get match data for I2C, ACPI and
DT-based matching, so that we can optimize the driver code.
Suggested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Biju Das <[email protected]>
[wsa: simplified var initialization]
Signed-off-by: Wolfram Sang <[email protected]>
|
|
The gxp_i2c_slave_irq_handler() is hidden in an #ifdef, but the
caller uses an IS_ENABLED() check:
drivers/i2c/busses/i2c-gxp.c: In function 'gxp_i2c_irq_handler':
drivers/i2c/busses/i2c-gxp.c:467:29: error: implicit declaration of function 'gxp_i2c_slave_irq_handler'; did you mean 'gxp_i2c_irq_handler'? [-Werror=implicit-function-declaration]
It has to consistently use one method or the other to avoid warnings,
so move to IS_ENABLED() here for readability and build coverage, and
move the #ifdef in linux/i2c.h to allow building it as dead code.
Fixes: 4a55ed6f89f5 ("i2c: Add GXP SoC I2C Controller")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Nick Hawkins <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back
type") introduced a new probe callback to convert i2c init routines to
not take an i2c_device_id parameter. Now that all in-tree drivers are
converted to the temporary .probe_new() callback, .probe() can be
modified to match the desired prototype.
Now that .probe() and .probe_new() have the same semantic, they can be
defined as members of an anonymous union to save some memory and
simplify the core code a bit.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Add fwnode APIs for finding and getting I2C adapters, which will be
used by the SFP code. These are passed the fwnode corresponding to
the adapter, and return the I2C adapter. It is the responsibility of
the caller to find the appropriate fwnode.
We keep the DT and ACPI interfaces, but where appropriate, recode them
to use the fwnode interfaces internally.
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Introduces new helper function to aid in .probe_new() refactors. In order
to use existing i2c_get_device_id() on the probe callback, the device
match table needs to be accessible in that function, which would require
bigger refactors in some drivers using the deprecated .probe callback.
This issue was discussed in more detail in the IIO mailing list.
Link: https://lore.kernel.org/all/[email protected]/
Suggested-by: Nuno Sá <[email protected]>
Suggested-by: Andy Shevchenko <[email protected]>
Suggested-by: Jonathan Cameron <[email protected]>
Signed-off-by: Angel Iglesias <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <[email protected]>
Reviewed-by: Jeremy Kerr <[email protected]>
Reviewed-by: Benjamin Mugnier <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Crt Mori <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Marek Behún <[email protected]> # for leds-turris-omnia
Acked-by: Andy Shevchenko <[email protected]>
Reviewed-by: Petr Machata <[email protected]> # for mlxsw
Reviewed-by: Maximilian Luz <[email protected]> # for surface3_power
Acked-by: Srinivas Pandruvada <[email protected]> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <[email protected]> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <[email protected]> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <[email protected]> # for versaclock5
Reviewed-by: Ajay Gupta <[email protected]> # for ucsi_ccg
Acked-by: Jonathan Cameron <[email protected]> # for iio
Acked-by: Peter Rosin <[email protected]> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <[email protected]> # for lontium-lt8912b
Reviewed-by: Jean Delvare <[email protected]> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <[email protected]> # for IPMI
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Acked-by: Sebastian Reichel <[email protected]> # for drivers/power
Acked-by: Krzysztof Hałasa <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
It was stated how the error codes should be. It was not stated what the
regular case should return. Add this.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
I2C slave events tracepoints can be enabled by:
echo 1 > /sys/kernel/tracing/events/i2c_slave/enable
and logs in /sys/kernel/tracing/trace will look like:
... i2c_slave: i2c-0 a=010 ret=0 WR_REQ []
... i2c_slave: i2c-0 a=010 ret=0 WR_RCV [02]
... i2c_slave: i2c-0 a=010 ret=0 WR_RCV [0c]
... i2c_slave: i2c-0 a=010 ret=0 STOP []
... i2c_slave: i2c-0 a=010 ret=0 RD_REQ [04]
... i2c_slave: i2c-0 a=010 ret=0 RD_PRO [b4]
... i2c_slave: i2c-0 a=010 ret=0 STOP []
formatted as:
i2c-<adapter_nr>
a=<addr>
ret=<ret> <- callback return value
<event>
[<data>]
trace printings can be selected by adding a filter like:
echo adapter_nr==1 >/sys/kernel/tracing/events/i2c_slave/filter
Signed-off-by: Jae Hyun Yoo <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Change i2c_acpi_new_device() into i2c_acpi_new_device_by_fwnode() and
add a static inline wrapper providing the old i2c_acpi_new_device()
behavior.
This is necessary because in some cases we may only have access
to the fwnode / acpi_device and not to the matching physical-node
struct device *.
Suggested-by: Andy Shevchenko <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Enable drivers to tell ACPI that there's no need to power on a device for
probe. Drivers should still perform this by themselves if there's a need
to. In some cases powering on the device during probe is undesirable, and
this change enables a driver to choose what fits best for it.
Add a field called "flags" into struct i2c_driver for driver flags, and a
flag I2C_DRV_ACPI_WAIVE_D0_PROBE to tell a driver supports probe in ACPI D
states other than 0.
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
We have 3 files now which have the need to count the number of
I2cSerialBus resources in an ACPI-device's resource-list.
Currently all implement their own helper function for this,
add a generic helper function to replace the 3 implementations.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Mika Westerberg <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big set of IIO and staging driver patches for 5.14-rc1.
Loads of IIO driver updates and additions in here, the shortlog has
the full details.
For the staging side, we moved a few drivers out of staging, and
deleted the kpc2000 drivers as the original developer asked us to
because no one was working on them anymore.
Also in here are loads of coding style cleanups due to different
intern projects focusing on the staging tree to try to get experience
doing kernel development.
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits)
staging: hi6421-spmi-pmic: cleanup some macros
staging: hi6421-spmi-pmic: change identation of a table
staging: hi6421-spmi-pmic: change a return code
staging: hi6421-spmi-pmic: better name IRQs
staging: hi6421-spmi-pmic: use devm_request_threaded_irq()
staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions
spmi: hisi-spmi-controller: move driver from staging
phy: phy-hi3670-usb3: move driver from staging into phy
staging: rtl8188eu: remove include/rtw_debug.h header
staging: rtl8188eu: remove GlobalDebugLevel variable
staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition
staging: rtl8188eu: remove RT_TRACE macro
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c
...
|
|
Expose the PEC calculation i2c_smbus_pec() for generic use.
Signed-off-by: Quan Nguyen <[email protected]>
Acked-by: Matt Johnston <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
If I2C is not compiled, there is no way we should see a call to
i2c_verify_client() on a device that is an i2c client. As such,
provide a stub to return NULL to resolve an associated build failure.
The build is failing with this link error
ld: fxls8962af-core.o: in function `fxls8962af_fifo_transfer':
fxls8962af-core.c: undefined reference to `i2c_verify_client'
Reported-by: Tom Rix <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Fixes: af959b7b96b8 ("iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads")
Reviewed-by: Sean Nyekjaer <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Although in the most platforms, the bus power of i2c
are alway on, some platforms disable the i2c bus power
in order to meet low power request.
We can control bulk regulator if it is provided in i2c
adapter device.
Signed-off-by: Bibby Hsieh <[email protected]>
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Hsin-Yi Wang <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
More and more drivers rely on devres to manage their resources, however
if bus' probe() and release() methods are not trivial and control some
of resources as well (for example enable or disable clocks, or attach
device to a power domain), we need to make sure that driver-allocated
resources are released immediately after driver's remove() method
returns, and not postponed until driver core gets around to releasing
resources. To fix that we open a new devres group before calling
driver's probe() and explicitly release it when we return from driver's
remove().
Tested-by: Jeff LaBundy <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Some I2C drivers like Designware and HiSilicon will print the
bus frequency mode information, so add a public one that everyone
can make use of.
Tested-by: Jarkko Nikula <[email protected]>
Reviewed-by: Jarkko Nikula <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Yicong Yang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Some I2C controller drivers will only unregister the I2C
adapter in their .remove() callback, which can be done
by simply using a managed variant to add the I2C adapter.
So add the managed functions for adding the I2C adapter.
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Yicong Yang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
|
|
From now on only accepting complete software nodes.
Signed-off-by: Heikki Krogerus <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
This makes it possible for the drivers to assign complete
software fwnodes to the devices instead of only the device
properties in those nodes.
Signed-off-by: Heikki Krogerus <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
This quirk signifies that the adapter cannot do a repeated
START, it always issues a STOP condition after transfers.
Suggested-by: Wolfram Sang <[email protected]>
Signed-off-by: Bence Csókás <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Switch to using the new API kobj_to_dev().
Signed-off-by: Tian Tao <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- bus recovery can now be given a pinctrl handle and the I2C core will
do all the steps to switch to/from GPIO which can save quite some
boilerplate code from drivers
- "fallthrough" conversion
- driver updates, mostly ID additions
* 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (32 commits)
i2c: iproc: fix race between client unreg and isr
i2c: eg20t: use generic power management
i2c: eg20t: Drop PCI wakeup calls from .suspend/.resume
i2c: mediatek: Fix i2c_spec_values description
i2c: mediatek: Add i2c compatible for MediaTek MT8192
dt-bindings: i2c: update bindings for MT8192 SoC
i2c: mediatek: Add access to more than 8GB dram in i2c driver
i2c: mediatek: Add apdma sync in i2c driver
i2c: i801: Add support for Intel Tiger Lake PCH-H
i2c: i801: Add support for Intel Emmitsburg PCH
i2c: bcm2835: Replace HTTP links with HTTPS ones
Documentation: i2c: dev: 'block process call' is supported
i2c: at91: Move to generic GPIO bus recovery
i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs
i2c: core: add generic I2C GPIO recovery
dt-bindings: i2c: add generic properties for GPIO bus recovery
i2c: rcar: avoid race when unregistering slave
i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
i2c: tegra: Fix runtime resume to re-init VI I2C
i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
...
|
|
Multiple I2C bus drivers use similar bindings to obtain information needed
for I2C recovery. For example, for platforms using device-tree, the
properties look something like this:
&i2c {
...
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c_default>;
pinctrl-1 = <&pinctrl_i2c_gpio>;
sda-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pio 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
...
}
For this reason, we can add this common initialization in the core. This
way, other I2C bus drivers will be able to support GPIO recovery just by
providing a pointer to platform's pinctrl and calling i2c_recover_bus()
when SDA is stuck low.
Signed-off-by: Codrin Ciubotariu <[email protected]>
[wsa: inverted one logic for better readability, minor update to kdoc]
Signed-off-by: Wolfram Sang <[email protected]>
|
|
|
|
All i2c_new_device-alike functions return ERR_PTR these days, but this
fallback function was missed.
Fixes: 2dea645ffc21 ("i2c: acpi: Return error pointers from i2c_acpi_new_device()")
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
[wsa: changed from 'ENOSYS' to 'ENODEV']
Signed-off-by: Wolfram Sang <[email protected]>
|
|
This manually reverts commit d1d84bb95364ed604015c2b788caaf3dbca0262f.
The only user has gone two years ago with commit 589edb56b424 ("ACPI /
scan: Create platform device for INT33FE ACPI nodes") and no new user
has showed up. Remove and hope we will never need it again.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Drop the doubled word "be" in a comment.
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
All in-tree users have been converted to the new i2c_new_client_device
function, so remove this deprecated one.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
i2c_client pointers are usually named 'client'. Use it here to get rid
of the ambiguity of 'dev->dev'.
Signed-off-by: Wolfram Sang <[email protected]>
|
|
This reverts commit 6fe12cdbcfe35ad4726a619a9546822d34fc934c. Testing in
linux-next showed it needs some more time.
Signed-off-by: Wolfram Sang <[email protected]>
|
|
|
|
Although in the most platforms, the bus power of i2c
are alway on, some platforms disable the i2c bus power
in order to meet low power request.
We get and enable bulk regulator in i2c adapter device.
Signed-off-by: Bibby Hsieh <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
The old email is still active, but for easier handling, I am going to
use my kernel.org address from now on. Also, add a mailmap for the now
defunct Pengutronix address.
Signed-off-by: Wolfram Sang <[email protected]>
|
|
All in-tree users have been converted to the new i2c_new_scanned_device
function, so remove this deprecated one.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has:
- using defines for bus speeds to avoid mistakes in hardcoded values;
lots of small driver updates because of that. Thanks, Andy!
- API change: i2c_setup_smbus_alert() was renamed to
i2c_new_smbus_alert_device() and returns ERRPTR now. All in-tree
users have been converted
- in the core, a rare race condition when deleting the cdev has been
fixed. Thanks, Kevin!
- lots of driver updates. Thanks, everyone!
I also want to mention: The amount of review and testing tags given
was quite high this time. Thank you to these people, too. I hope we
can keep it like this!"
* 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: rcar: clean up after refactoring i2c_timings
macintosh: convert to i2c_new_scanned_device
i2c: drivers: Use generic definitions for bus frequencies
i2c: algo: Use generic definitions for bus frequencies
i2c: stm32f7: switch to I²C generic property parsing
i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
i2c: core: Allow override timing properties with 0
i2c: core: Provide generic definitions for bus frequencies
i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel()
i2c: imx: remove duplicate print after platform_get_irq()
i2c: designware: Fix spelling typos in the comments
i2c: designware: Discard i2c_dw_read_comp_param() function
i2c: designware: Detect the FIFO size in the common code
i2c: dev: Fix the race between the release of i2c_dev and cdev
i2c: qcom-geni: Drop of_platform.h include
i2c: qcom-geni: Grow a dev pointer to simplify code
i2c: qcom-geni: Let firmware specify irq trigger flags
i2c: stm32f7: do not backup read-only PECR register
i2c: smbus: remove outdated references to irq level triggers
i2c: convert SMBus alert setup function to return an ERRPTR
...
|
|
There are few maximum bus frequencies being used in the I²C core code.
Provide generic definitions for bus frequencies and use them in the core.
The drivers may use predefined constants where it is appropriate.
Some of them are already using these under slightly different names.
We will convert them later to use newly introduced defines.
Note, the name of modes are chosen to follow well established naming
scheme [1].
These definitions will also help to avoid typos in the numbers that
may lead to subtle errors.
[1]: https://en.wikipedia.org/wiki/I%C2%B2C#Differences_between_modes
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Don't let non-letters inside a literal block without escaping it, as
the toolchain would mis-interpret it:
./include/linux/i2c.h:518: WARNING: Inline strong start-string without end-string.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
According to coding-style.rst, extern should not be specified for
exported functions.
Signed-off-by: Luca Ceresoli <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
As a preparation for an API conversion, factor out something frequently
used in the media subsystem. As an improvement, it bails out on both,
NULL and ERRPTR to handle the old and new API.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Fix kernel-doc warning in <linux/i2c.h>.
../include/linux/i2c.h:337: warning: Function parameter or member 'init_irq' not described in 'i2c_client'
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
All in-kernel users have been converted to
{devm_}i2c_new_dummy_device(). Remove the old API.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Tested-by: Luca Ceresoli <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
In the general move to have i2c_new_*_device functions which return
ERR_PTR instead of NULL, this patch converts i2c_new_probed_device().
There are only few users, so this patch converts the I2C core and all
users in one go. The function gets renamed to i2c_new_scanned_device()
so out-of-tree users will get a build failure to understand they need to
adapt their error checking code.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Reviewed-by: Max Staudt <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
There are no in-tree users of these helpers anymore, and there
shouldn't. Most use cases went away once the driver model started to
refcount for us. There have been users like the media subsystem, but
they all switched to better refcounting methods meanwhile. Media did
this in 2008. Last user (IPMI) left 2018. Remove this cruft.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Tested-by: Luca Ceresoli <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
|
|
i2c-digital-filter-width-ns:
This optional timing property specifies the width of the spikes on the i2c
lines (in ns) that can be filtered out by built-in digital filters which are
embedded in some i2c controllers.
i2c-analog-filter-cutoff-frequency:
This optional timing property specifies the cutoff frequency of a low-pass
analog filter built-in i2c controllers. This low pass filter is used to filter
out high frequency noise on the i2c lines. Specified in Hz.
Include these properties in the timings structure and read them as integers.
Signed-off-by: Eugen Hristev <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- new driver for ICY, an Amiga Zorro card :)
- axxia driver gained slave mode support, NXP driver gained ACPI
- the slave EEPROM backend gained 16 bit address support
- and lots of regular driver updates and reworks
* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: tegra: Move suspend handling to NOIRQ phase
i2c: imx: ACPI support for NXP i2c controller
i2c: uniphier(-f): remove all dev_dbg()
i2c: uniphier(-f): use devm_platform_ioremap_resource()
i2c: slave-eeprom: Add comment about address handling
i2c: exynos5: Remove IRQF_ONESHOT
i2c: stm32f7: Make structure stm32f7_i2c_algo constant
i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
i2c-eeprom_slave: Add support for more eeprom models
i2c: fsi: Add of_put_node() before break
i2c: synquacer: Make synquacer_i2c_ops constant
i2c: hix5hd2: Remove IRQF_ONESHOT
i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
watchdog: iTCO: Add support for Cannon Lake PCH iTCO
i2c: iproc: Make bcm_iproc_i2c_quirks constant
i2c: iproc: Add full name of devicetree node to adapter name
i2c: piix4: Add ACPI support
i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
i2c: ocores: use request_any_context_irq() to register IRQ handler
i2c: designware: Fix optional reset error handling
...
|
|
In the general move to have i2c_new_*_device functions which return
ERR_PTR instead of NULL, this patch converts i2c_new_secondary_device().
There are only few users, so this patch converts the I2C core and all
users in one go. The function gets renamed to i2c_new_ancillary_device()
so out-of-tree users will get a build failure to understand they need to
adapt their error checking code.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]> # adv748x
Reviewed-by: Laurent Pinchart <[email protected]> # adv7511 + adv7604
Reviewed-by: Hans Verkuil <[email protected]> # adv7604
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Convert each file at I2C subsystem, renaming them to .rst and
adding to the driver-api book.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
|