| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Function __copy_map_value and zero_map_value miscalculated copy offset,
resulting in possible copy of unwanted data to user or kernel.
Fix it.
Fixes: cc48755808c6 ("bpf: Add zero_map_value to zero map value with special fields")
Fixes: 4d7d7f69f4b1 ("bpf: Adapt copy_map_value for multiple offset case")
Signed-off-by: Xu Kuohai <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The dispatcher function is currently abusing the ftrace __fentry__
call location for its own purposes -- this obviously gives trouble
when the dispatcher and ftrace are both in use.
A previous solution tried using __attribute__((patchable_function_entry()))
which works, except it is GCC-8+ only, breaking the build on the
earlier still supported compilers. Instead use static_call() -- which
has its own annotations and does not conflict with ftrace -- to
rewrite the dispatch function.
By using: return static_call()(ctx, insni, bpf_func) you get a perfect
forwarding tail call as function body (iow a single jmp instruction).
By having the default static_call() target be bpf_dispatcher_nop_func()
it retains the default behaviour (an indirect call to the argument
function). Only once a dispatcher program is attached is the target
rewritten to directly call the JIT'ed image.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Björn Töpel <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lkml.kernel.org/r/Y1/oBlK0yFk5c/[email protected]
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Because __attribute__((patchable_function_entry)) is only available
since GCC-8 this solution fails to build on the minimum required GCC
version.
Undo these changes so we might try again -- without cluttering up the
patches with too many changes.
This is an almost complete revert of:
dbe69b299884 ("bpf: Fix dispatcher patchable function entry to 5 bytes nop")
ceea991a019c ("bpf: Move bpf_dispatcher function out of ftrace locations")
(notably the arch/x86/Kconfig hunk is kept).
Reported-by: David Laight <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Björn Töpel <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Refactor map->off_arr handling into generic functions that can work on
their own without hardcoding map specific code. The btf_fields_offs
structure is now returned from btf_parse_field_offs, which can be reused
later for types in program BTF.
All functions like copy_map_value, zero_map_value call generic
underlying functions so that they can also be reused later for copying
to values allocated in programs which encode specific fields.
Later, some helper functions will also require access to this
btf_field_offs structure to be able to skip over special fields at
runtime.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Now that kptr_off_tab has been refactored into btf_record, and can hold
more than one specific field type, accomodate bpf_spin_lock and
bpf_timer as well.
While they don't require any more metadata than offset, having all
special fields in one place allows us to share the same code for
allocated user defined types and handle both map values and these
allocated objects in a similar fashion.
As an optimization, we still keep spin_lock_off and timer_off offsets in
the btf_record structure, just to avoid having to find the btf_field
struct each time their offset is needed. This is mostly needed to
manipulate such objects in a map value at runtime. It's ok to hardcode
just one offset as more than one field is disallowed.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
To prepare the BPF verifier to handle special fields in both map values
and program allocated types coming from program BTF, we need to refactor
the kptr_off_tab handling code into something more generic and reusable
across both cases to avoid code duplication.
Later patches also require passing this data to helpers at runtime, so
that they can work on user defined types, initialize them, destruct
them, etc.
The main observation is that both map values and such allocated types
point to a type in program BTF, hence they can be handled similarly. We
can prepare a field metadata table for both cases and store them in
struct bpf_map or struct btf depending on the use case.
Hence, refactor the code into generic btf_record and btf_field member
structs. The btf_record represents the fields of a specific btf_type in
user BTF. The cnt indicates the number of special fields we successfully
recognized, and field_mask is a bitmask of fields that were found, to
enable quick determination of availability of a certain field.
Subsequently, refactor the rest of the code to work with these generic
types, remove assumptions about kptr and kptr_off_tab, rename variables
to more meaningful names, etc.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2022-11-02
We've added 70 non-merge commits during the last 14 day(s) which contain
a total of 96 files changed, 3203 insertions(+), 640 deletions(-).
The main changes are:
1) Make cgroup local storage available to non-cgroup attached BPF programs
such as tc BPF ones, from Yonghong Song.
2) Avoid unnecessary deadlock detection and failures wrt BPF task storage
helpers, from Martin KaFai Lau.
3) Add LLVM disassembler as default library for dumping JITed code
in bpftool, from Quentin Monnet.
4) Various kprobe_multi_link fixes related to kernel modules,
from Jiri Olsa.
5) Optimize x86-64 JIT with emitting BMI2-based shift instructions,
from Jie Meng.
6) Improve BPF verifier's memory type compatibility for map key/value
arguments, from Dave Marchevsky.
7) Only create mmap-able data section maps in libbpf when data is exposed
via skeletons, from Andrii Nakryiko.
8) Add an autoattach option for bpftool to load all object assets,
from Wang Yufen.
9) Various memory handling fixes for libbpf and BPF selftests,
from Xu Kuohai.
10) Initial support for BPF selftest's vmtest.sh on arm64,
from Manu Bretelle.
11) Improve libbpf's BTF handling to dedup identical structs,
from Alan Maguire.
12) Add BPF CI and denylist documentation for BPF selftests,
from Daniel Müller.
13) Check BPF cpumap max_entries before doing allocation work,
from Florian Lehner.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (70 commits)
samples/bpf: Fix typo in README
bpf: Remove the obsolte u64_stats_fetch_*_irq() users.
bpf: check max_entries before allocating memory
bpf: Fix a typo in comment for DFS algorithm
bpftool: Fix spelling mistake "disasembler" -> "disassembler"
selftests/bpf: Fix bpftool synctypes checking failure
selftests/bpf: Panic on hard/soft lockup
docs/bpf: Add documentation for new cgroup local storage
selftests/bpf: Add test cgrp_local_storage to DENYLIST.s390x
selftests/bpf: Add selftests for new cgroup local storage
selftests/bpf: Fix test test_libbpf_str/bpf_map_type_str
bpftool: Support new cgroup local storage
libbpf: Support new cgroup local storage
bpf: Implement cgroup storage available to non-cgroup-attached bpf progs
bpf: Refactor some inode/task/sk storage functions for reuse
bpf: Make struct cgroup btf id global
selftests/bpf: Tracing prog can still do lookup under busy lock
selftests/bpf: Ensure no task storage failure for bpf_lsm.s prog due to deadlock detection
bpf: Add new bpf_task_storage_delete proto with no deadlock detection
bpf: bpf_task_storage_delete_recur does lookup first before the deadlock check
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Similar to sk/inode/task storage, implement similar cgroup local storage.
There already exists a local storage implementation for cgroup-attached
bpf programs. See map type BPF_MAP_TYPE_CGROUP_STORAGE and helper
bpf_get_local_storage(). But there are use cases such that non-cgroup
attached bpf progs wants to access cgroup local storage data. For example,
tc egress prog has access to sk and cgroup. It is possible to use
sk local storage to emulate cgroup local storage by storing data in socket.
But this is a waste as it could be lots of sockets belonging to a particular
cgroup. Alternatively, a separate map can be created with cgroup id as the key.
But this will introduce additional overhead to manipulate the new map.
A cgroup local storage, similar to existing sk/inode/task storage,
should help for this use case.
The life-cycle of storage is managed with the life-cycle of the
cgroup struct. i.e. the storage is destroyed along with the owning cgroup
with a call to bpf_cgrp_storage_free() when cgroup itself
is deleted.
The userspace map operations can be done by using a cgroup fd as a key
passed to the lookup, update and delete operations.
Typically, the following code is used to get the current cgroup:
struct task_struct *task = bpf_get_current_task_btf();
... task->cgroups->dfl_cgrp ...
and in structure task_struct definition:
struct task_struct {
....
struct css_set __rcu *cgroups;
....
}
With sleepable program, accessing task->cgroups is not protected by rcu_read_lock.
So the current implementation only supports non-sleepable program and supporting
sleepable program will be the next step together with adding rcu_read_lock
protection for rcu tagged structures.
Since map name BPF_MAP_TYPE_CGROUP_STORAGE has been used for old cgroup local
storage support, the new map name BPF_MAP_TYPE_CGRP_STORAGE is used
for cgroup storage available to non-cgroup-attached bpf programs. The old
cgroup storage supports bpf_get_local_storage() helper to get the cgroup data.
The new cgroup storage helper bpf_cgrp_storage_get() can provide similar
functionality. While old cgroup storage pre-allocates storage memory, the new
mechanism can also pre-allocate with a user space bpf_map_update_elem() call
to avoid potential run-time memory allocation failure.
Therefore, the new cgroup storage can provide all functionality w.r.t.
the old one. So in uapi bpf.h, the old BPF_MAP_TYPE_CGROUP_STORAGE is alias to
BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED to indicate the old cgroup storage can
be deprecated since the new one can provide the same functionality.
Acked-by: David Vernet <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The bpf_lsm and bpf_iter do not recur that will cause a deadlock.
The situation is similar to the bpf_pid_task_storage_delete_elem()
which is called from the syscall map_delete_elem. It does not need
deadlock detection. Otherwise, it will cause unnecessary failure
when calling the bpf_task_storage_delete() helper.
This patch adds bpf_task_storage_delete proto that does not do deadlock
detection. It will be used by bpf_lsm and bpf_iter program.
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The bpf_lsm and bpf_iter do not recur that will cause a deadlock.
The situation is similar to the bpf_pid_task_storage_lookup_elem()
which is called from the syscall map_lookup_elem. It does not need
deadlock detection. Otherwise, it will cause unnecessary failure
when calling the bpf_task_storage_get() helper.
This patch adds bpf_task_storage_get proto that does not do deadlock
detection. It will be used by bpf_lsm and bpf_iter programs.
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch adds the "_recur" naming to the bpf_task_storage_{get,delete}
proto. In a latter patch, they will only be used by the tracing
programs that requires a deadlock detection because a tracing
prog may use bpf_task_storage_{get,delete} recursively and cause a
deadlock.
Another following patch will add a different helper proto for the non
tracing programs because they do not need the deadlock prevention.
This patch does this rename to prepare for this future proto
additions.
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The commit 64696c40d03c ("bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline")
removed prog->active check for struct_ops prog. The bpf_lsm
and bpf_iter is also using trampoline. Like struct_ops, the bpf_lsm
and bpf_iter have fixed hooks for the prog to attach. The
kernel does not call the same hook in a recursive way.
This patch also removes the prog->active check for
bpf_lsm and bpf_iter.
A later patch has a test to reproduce the recursion issue
for a sleepable bpf_lsm program.
This patch appends the '_recur' naming to the existing
enter and exit functions that track the prog->active counter.
New __bpf_prog_{enter,exit}[_sleepable] function are
added to skip the prog->active tracking. The '_struct_ops'
version is also removed.
It also moves the decision on picking the enter and exit function to
the new bpf_trampoline_{enter,exit}(). It returns the '_recur' ones
for all tracing progs to use. For bpf_lsm, bpf_iter,
struct_ops (no prog->active tracking after 64696c40d03c), and
bpf_lsm_cgroup (no prog->active tracking after 69fd337a975c7),
it will return the functions that don't track the prog->active.
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The patchable_function_entry(5) might output 5 single nop
instructions (depends on toolchain), which will clash with
bpf_arch_text_poke check for 5 bytes nop instruction.
Adding early init call for dispatcher that checks and change
the patchable entry into expected 5 nop instruction if needed.
There's no need to take text_mutex, because we are using it
in early init call which is called at pre-smp time.
Fixes: ceea991a019c ("bpf: Move bpf_dispatcher function out of ftrace locations")
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The struct_ops prog is to allow using bpf to implement the functions in
a struct (eg. kernel module). The current usage is to implement the
tcp_congestion. The kernel does not call the tcp-cc's ops (ie.
the bpf prog) in a recursive way.
The struct_ops is sharing the tracing-trampoline's enter/exit
function which tracks prog->active to avoid recursion. It is
needed for tracing prog. However, it turns out the struct_ops
bpf prog will hit this prog->active and unnecessarily skipped
running the struct_ops prog. eg. The '.ssthresh' may run in_task()
and then interrupted by softirq that runs the same '.ssthresh'.
Skip running the '.ssthresh' will end up returning random value
to the caller.
The patch adds __bpf_prog_{enter,exit}_struct_ops for the
struct_ops trampoline. They do not track the prog->active
to detect recursion.
One exception is when the tcp_congestion's '.init' ops is doing
bpf_setsockopt(TCP_CONGESTION) and then recurs to the same
'.init' ops. This will be addressed in the following patches.
Fixes: ca06f55b9002 ("bpf: Add per-program recursion prevention mechanism")
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Allow creating an iterator that loops through resources of one
thread/process.
People could only create iterators to loop through all resources of
files, vma, and tasks in the system, even though they were interested
in only the resources of a specific task or process. Passing the
additional parameters, people can now create an iterator to go
through all resources or only the resources of a task.
Signed-off-by: Kui-Feng Lee <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Mark the trampoline as RO+X after arch_prepare_bpf_trampoline, so that
the trampoine follows W^X rule strictly. This will turn off warnings like
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Also remove bpf_jit_alloc_exec_page(), since it is not used any more.
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Allocate bpf_dispatcher with bpf_prog_pack_alloc so that bpf_dispatcher
can share pages with bpf programs.
arch_prepare_bpf_dispatcher() is updated to provide a RW buffer as working
area for arch code to write to.
This also fixes CPA W^X warnning like:
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We got report from sysbot [1] about warnings that were caused by
bpf program attached to contention_begin raw tracepoint triggering
the same tracepoint by using bpf_trace_printk helper that takes
trace_printk_lock lock.
Call Trace:
<TASK>
? trace_event_raw_event_bpf_trace_printk+0x5f/0x90
bpf_trace_printk+0x2b/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
__unfreeze_partials+0x5b/0x160
...
The can be reproduced by attaching bpf program as raw tracepoint on
contention_begin tracepoint. The bpf prog calls bpf_trace_printk
helper. Then by running perf bench the spin lock code is forced to
take slow path and call contention_begin tracepoint.
Fixing this by skipping execution of the bpf program if it's
already running, Using bpf prog 'active' field, which is being
currently used by trampoline programs for the same reason.
Moving bpf_prog_inc_misses_counter to syscall.c because
trampoline.c is compiled in just for CONFIG_BPF_JIT option.
Reviewed-by: Stanislav Fomichev <[email protected]>
Reported-by: [email protected]
[1] https://lore.kernel.org/bpf/YxhFe3EwqchC%2FfYf@krava/T/#t
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add the bpf_lookup_user_key(), bpf_lookup_system_key() and bpf_key_put()
kfuncs, to respectively search a key with a given key handle serial number
and flags, obtain a key from a pre-determined ID defined in
include/linux/verification.h, and cleanup.
Introduce system_keyring_id_check() to validate the keyring ID parameter of
bpf_lookup_system_key().
Signed-off-by: Roberto Sassu <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Export bpf_dynptr_get_size(), so that kernel code dealing with eBPF dynamic
pointers can obtain the real size of data carried by this data structure.
Signed-off-by: Roberto Sassu <[email protected]>
Reviewed-by: Joanne Koong <[email protected]>
Acked-by: KP Singh <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In a prior change, we added a new BPF_MAP_TYPE_USER_RINGBUF map type which
will allow user-space applications to publish messages to a ring buffer
that is consumed by a BPF program in kernel-space. In order for this
map-type to be useful, it will require a BPF helper function that BPF
programs can invoke to drain samples from the ring buffer, and invoke
callbacks on those samples. This change adds that capability via a new BPF
helper function:
bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx,
u64 flags)
BPF programs may invoke this function to run callback_fn() on a series of
samples in the ring buffer. callback_fn() has the following signature:
long callback_fn(struct bpf_dynptr *dynptr, void *context);
Samples are provided to the callback in the form of struct bpf_dynptr *'s,
which the program can read using BPF helper functions for querying
struct bpf_dynptr's.
In order to support bpf_ringbuf_drain(), a new PTR_TO_DYNPTR register
type is added to the verifier to reflect a dynptr that was allocated by
a helper function and passed to a BPF program. Unlike PTR_TO_STACK
dynptrs which are allocated on the stack by a BPF program, PTR_TO_DYNPTR
dynptrs need not use reference tracking, as the BPF helper is trusted to
properly free the dynptr before returning. The verifier currently only
supports PTR_TO_DYNPTR registers that are also DYNPTR_TYPE_LOCAL.
Note that while the corresponding user-space libbpf logic will be added
in a subsequent patch, this patch does contain an implementation of the
.map_poll() callback for BPF_MAP_TYPE_USER_RINGBUF maps. This
.map_poll() callback guarantees that an epoll-waiting user-space
producer will receive at least one event notification whenever at least
one sample is drained in an invocation of bpf_user_ringbuf_drain(),
provided that the function is not invoked with the BPF_RB_NO_WAKEUP
flag. If the BPF_RB_FORCE_WAKEUP flag is provided, a wakeup
notification is sent even if no sample was drained.
Signed-off-by: David Vernet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The dispatcher function is attached/detached to trampoline by
dispatcher update function. At the same time it's available as
ftrace attachable function.
After discussion [1] the proposed solution is to use compiler
attributes to alter bpf_dispatcher_##name##_func function:
- remove it from being instrumented with __no_instrument_function__
attribute, so ftrace has no track of it
- but still generate 5 nop instructions with patchable_function_entry(5)
attribute, which are expected by bpf_arch_text_poke used by
dispatcher update function
Enabling HAVE_DYNAMIC_FTRACE_NO_PATCHABLE option for x86, so
__patchable_function_entries functions are not part of ftrace/mcount
locations.
Adding attributes to bpf_dispatcher_XXX function on x86_64 so it's
kept out of ftrace locations and has 5 byte nop generated at entry.
These attributes need to be arch specific as pointed out by Ilya
Leoshkevic in here [2].
The dispatcher image is generated only for x86_64 arch, so the
code can stay as is for other archs.
[1] https://lore.kernel.org/bpf/[email protected]/
[2] https://lore.kernel.org/bpf/[email protected]/
Suggested-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add corresponding unimplemented stub for when CONFIG_BPF_SYSCALL=n
Signed-off-by: Daniel Xu <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/4021398e884433b1fef57a4d28361bb9fcf1bd05.1662568410.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We need this helper to skip over special fields (bpf_spin_lock,
bpf_timer, kptrs) while zeroing a map value. Use the same logic as
copy_map_value but memset instead of memcpy.
Currently, the code zeroing map value memory does not have to deal with
special fields, hence this is a prerequisite for introducing such
support.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
bpf_long_memcpy is used while copying to remote percpu regions from BPF
syscall and helpers, so that the copy is atomic at word size
granularity.
This might not be possible when you copy from map value hosting kptrs
from or to percpu maps, as the alignment or size in disjoint regions may
not be multiple of word size.
Hence, to avoid complicating the copy loop, we only use bpf_long_memcpy
when special fields are not present, otherwise use normal memcpy to copy
the disjoint regions.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
For drivers (outside of network), the incoming data is not statically
defined in a struct. Most of the time the data buffer is kzalloc-ed
and thus we can not rely on eBPF and BTF to explore the data.
This commit allows to return an arbitrary memory, previously allocated by
the driver.
An interesting extra point is that the kfunc can mark the exported
memory region as read only or read/write.
So, when a kfunc is not returning a pointer to a struct but to a plain
type, we can consider it is a valid allocated memory assuming that:
- one of the arguments is either called rdonly_buf_size or
rdwr_buf_size
- and this argument is a const from the caller point of view
We can then use this parameter as the size of the allocated memory.
The memory is either read-only or read-write based on the name
of the size parameter.
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
btf_check_subprog_arg_match() was used twice in verifier.c:
- when checking for the type mismatches between a (sub)prog declaration
and BTF
- when checking the call of a subprog to see if the provided arguments
are correct and valid
This is problematic when we check if the first argument of a program
(pointer to ctx) is correctly accessed:
To be able to ensure we access a valid memory in the ctx, the verifier
assumes the pointer to context is not null.
This has the side effect of marking the program accessing the entire
context, even if the context is never dereferenced.
For example, by checking the context access with the current code, the
following eBPF program would fail with -EINVAL if the ctx is set to null
from the userspace:
```
SEC("syscall")
int prog(struct my_ctx *args) {
return 0;
}
```
In that particular case, we do not want to actually check that the memory
is correct while checking for the BTF validity, but we just want to
ensure that the (sub)prog definition matches the BTF we have.
So split btf_check_subprog_arg_match() in two so we can actually check
for the memory used when in a call, and ignore that part when not.
Note that a further patch is in preparation to disentangled
btf_check_func_arg_match() from these two purposes, and so right now we
just add a new hack around that by adding a boolean to this function.
Signed-off-by: Benjamin Tissoires <[email protected]>
Acked-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Allow struct argument in trampoline based programs where
the struct size should be <= 16 bytes. In such cases, the argument
will be put into up to 2 registers for bpf, x86_64 and arm64
architectures.
To support arch-specific trampoline manipulation,
add arg_flags for additional struct information about arguments
in btf_func_model. Such information will be used in arch specific
function arch_prepare_bpf_trampoline() to prepare argument access
properly in trampoline.
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Hao Luo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The following hooks are per-cgroup hooks but they are not
using cgroup_{common,current}_func_proto, fix it:
* BPF_PROG_TYPE_CGROUP_SKB (cg_skb)
* BPF_PROG_TYPE_CGROUP_SOCK_ADDR (cg_sock_addr)
* BPF_PROG_TYPE_CGROUP_SOCK (cg_sock)
* BPF_PROG_TYPE_LSM+BPF_LSM_CGROUP
Also:
* move common func_proto's into cgroup func_proto handlers
* make sure bpf_{g,s}et_retval are not accessible from recvmsg,
getpeername and getsockname (return/errno is ignored in these
places)
* as a side effect, expose get_current_pid_tgid, get_current_comm_proto,
get_current_ancestor_cgroup_id, get_cgroup_classid to more cgroup
hooks
Acked-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Most of the code in bpf_setsockopt(SOL_SOCKET) are duplicated from
the sk_setsockopt(). The number of supported optnames are
increasing ever and so as the duplicated code.
One issue in reusing sk_setsockopt() is that the bpf prog
has already acquired the sk lock. This patch adds a
has_current_bpf_ctx() to tell if the sk_setsockopt() is called from
a bpf prog. The bpf prog calling bpf_setsockopt() is either running
in_task() or in_serving_softirq(). Both cases have the current->bpf_ctx
initialized. Thus, the has_current_bpf_ctx() only needs to
test !!current->bpf_ctx.
This patch also adds sockopt_{lock,release}_sock() helpers
for sk_setsockopt() to use. These helpers will test
has_current_bpf_ctx() before acquiring/releasing the lock. They are
in EXPORT_SYMBOL for the ipv6 module to use in a latter patch.
Note on the change in sock_setbindtodevice(). sockopt_lock_sock()
is done in sock_setbindtodevice() instead of doing the lock_sock
in sock_bindtoindex(..., lock_sk = true).
Reviewed-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Commit 3dc6ffae2da2 ("timekeeping: Introduce fast accessor to clock tai")
introduced a fast and NMI-safe accessor for CLOCK_TAI. Especially in time
sensitive networks (TSN), where all nodes are synchronized by Precision Time
Protocol (PTP), it's helpful to have the possibility to generate timestamps
based on CLOCK_TAI instead of CLOCK_MONOTONIC. With a BPF helper for TAI in
place, it becomes very convenient to correlate activity across different
machines in the network.
Use cases for such a BPF helper include functionalities such as Tx launch
time (e.g. ETF and TAPRIO Qdiscs) and timestamping.
Note: CLOCK_TAI is nothing new per se, only the NMI-safe variant of it is.
Signed-off-by: Jesper Dangaard Brouer <[email protected]>
[Kurt: Wrote changelog and renamed helper]
Signed-off-by: Kurt Kanzenbach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When tracing a function with IPMODIFY ftrace_ops (livepatch), the bpf
trampoline must follow the instruction pointer saved on stack. This needs
extra handling for bpf trampolines with BPF_TRAMP_F_CALL_ORIG flag.
Implement bpf_tramp_ftrace_ops_func and use it for the ftrace_ops used
by BPF trampoline. This enables tracing functions with livepatch.
This also requires moving bpf trampoline to *_ftrace_direct_mult APIs.
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Currently we call the original function by using the absolute address
given at the JIT generation. That's not usable when having trampoline
attached to multiple functions, or the target address changes dynamically
(in case of live patch). In such cases we need to take the return address
from the stack.
Adding support to retrieve the original function address from the stack
by adding new BPF_TRAMP_F_ORIG_STACK flag for arch_prepare_bpf_trampoline
function.
Basically we take the return address of the 'fentry' call:
function + 0: call fentry # stores 'function + 5' address on stack
function + 5: ...
The 'function + 5' address will be used as the address for the
original function to call.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Instead of populating multiple sets to indicate some attribute and then
researching the same BTF ID in them, prepare a single unified BTF set
which indicates whether a kfunc is allowed to be called, and also its
attributes if any at the same time. Now, only one call is needed to
perform the lookup for both kfunc availability and its attributes.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
They were updated in kernel/bpf/trampoline.c to fix another build
issue. We should to do the same for include/linux/bpf.h header.
Fixes: 3908fcddc65d ("bpf: fix lsm_cgroup build errors on esoteric configs")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
syzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens
with multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile()
on each sub program. And then, we call it on each sub program again. jit_data
is not freed in the first call of bpf_int_jit_compile(). Similarly we don't
call bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile().
If bpf_int_jit_compile() failed for one sub program, we will call
bpf_jit_binary_pack_finalize() for this sub program. However, we don't have a
chance to call it for other sub programs. Then we will hit "goto out_free" in
jit_subprogs(), and call bpf_jit_free on some subprograms that haven't got
bpf_jit_binary_pack_finalize() yet.
At this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is
freed erroneously.
Fix this with a custom bpf_jit_free() for x86_64, which calls
bpf_jit_binary_pack_finalize() if necessary. Also, with custom
bpf_jit_free(), bpf_prog_aux->use_bpf_prog_pack is not needed any more,
remove it.
Fixes: 1022a5498f6f ("bpf, x86_64: Use bpf_jit_binary_pack_alloc")
[1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f
[2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445
Reported-by: [email protected]
Reported-by: [email protected]
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The memory consumed by a bpf map is always accounted to the memory
cgroup of the process which created the map. The map can outlive
the memory cgroup if it's used by processes in other cgroups or
is pinned on bpffs. In this case the map pins the original cgroup
in the dying state.
For other types of objects (slab objects, non-slab kernel allocations,
percpu objects and recently LRU pages) there is a reparenting process
implemented: on cgroup offlining charged objects are getting
reassigned to the parent cgroup. Because all charges and statistics
are fully recursive it's a fairly cheap operation.
For efficiency and consistency with other types of objects, let's do
the same for bpf maps. Fortunately thanks to the objcg API, the
required changes are minimal.
Please, note that individual allocations (slabs, percpu and large
kmallocs) already have the reparenting mechanism. This commit adds
it to the saved map->memcg pointer by replacing it to map->objcg.
Because dying cgroups are not visible for a user and all charges are
recursive, this commit doesn't bring any behavior changes for a user.
v2:
added a missing const qualifier
Signed-off-by: Roman Gushchin <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
I don't see how to make it nice without introducing btf id lists
for the hooks where these helpers are allowed. Some LSM hooks
work on the locked sockets, some are triggering early and
don't grab any locks, so have two lists for now:
1. LSM hooks which trigger under socket lock - minority of the hooks,
but ideal case for us, we can expose existing BTF-based helpers
2. LSM hooks which trigger without socket lock, but they trigger
early in the socket creation path where it should be safe to
do setsockopt without any locks
3. The rest are prohibited. I'm thinking that this use-case might
be a good gateway to sleeping lsm cgroup hooks in the future.
We can either expose lock/unlock operations (and add tracking
to the verifier) or have another set of bpf_setsockopt
wrapper that grab the locks and might sleep.
Reviewed-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Previous patch adds 1:1 mapping between all 211 LSM hooks
and bpf_cgroup program array. Instead of reserving a slot per
possible hook, reserve 10 slots per cgroup for lsm programs.
Those slots are dynamically allocated on demand and reclaimed.
struct cgroup_bpf {
struct bpf_prog_array * effective[33]; /* 0 264 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
struct hlist_head progs[33]; /* 264 264 */
/* --- cacheline 8 boundary (512 bytes) was 16 bytes ago --- */
u8 flags[33]; /* 528 33 */
/* XXX 7 bytes hole, try to pack */
struct list_head storages; /* 568 16 */
/* --- cacheline 9 boundary (576 bytes) was 8 bytes ago --- */
struct bpf_prog_array * inactive; /* 584 8 */
struct percpu_ref refcnt; /* 592 16 */
struct work_struct release_work; /* 608 72 */
/* size: 680, cachelines: 11, members: 7 */
/* sum members: 673, holes: 1, sum holes: 7 */
/* last cacheline: 40 bytes */
};
Reviewed-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Allow attaching to lsm hooks in the cgroup context.
Attaching to per-cgroup LSM works exactly like attaching
to other per-cgroup hooks. New BPF_LSM_CGROUP is added
to trigger new mode; the actual lsm hook we attach to is
signaled via existing attach_btf_id.
For the hooks that have 'struct socket' or 'struct sock' as its first
argument, we use the cgroup associated with that socket. For the rest,
we use 'current' cgroup (this is all on default hierarchy == v2 only).
Note that for some hooks that work on 'struct sock' we still
take the cgroup from 'current' because some of them work on the socket
that hasn't been properly initialized yet.
Behind the scenes, we allocate a shim program that is attached
to the trampoline and runs cgroup effective BPF programs array.
This shim has some rudimentary ref counting and can be shared
between several programs attaching to the same lsm hook from
different cgroups.
Note that this patch bloats cgroup size because we add 211
cgroup_bpf_attach_type(s) for simplicity sake. This will be
addressed in the subsequent patch.
Also note that we only add non-sleepable flavor for now. To enable
sleepable use-cases, bpf_prog_run_array_cg has to grab trace rcu,
shim programs have to be freed via trace rcu, cgroup_bpf.effective
should be also trace-rcu-managed + maybe some other changes that
I'm not aware of.
Reviewed-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
I'll be adding lsm cgroup specific helpers that grab
trampoline mutex.
No functional changes.
Reviewed-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Calls to `bpf_loop` are replaced with direct loops to avoid
indirection. E.g. the following:
bpf_loop(10, foo, NULL, 0);
Is replaced by equivalent of the following:
for (int i = 0; i < 10; ++i)
foo(i, NULL);
This transformation could be applied when:
- callback is known and does not change during program execution;
- flags passed to `bpf_loop` are always zero.
Inlining logic works as follows:
- During execution simulation function `update_loop_inline_state`
tracks the following information for each `bpf_loop` call
instruction:
- is callback known and constant?
- are flags constant and zero?
- Function `optimize_bpf_loop` increases stack depth for functions
where `bpf_loop` calls can be inlined and invokes `inline_bpf_loop`
to apply the inlining. The additional stack space is used to spill
registers R6, R7 and R8. These registers are used as loop counter,
loop maximal bound and callback context parameter;
Measurements using `benchs/run_bench_bpf_loop.sh` inside QEMU / KVM on
i7-4710HQ CPU show a drop in latency from 14 ns/op to 2 ns/op.
Signed-off-by: Eduard Zingerman <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch does two things:
1) Marks the dynptr bpf_func_proto structs that were added in [1]
as static, as pointed out by the kernel test robot in [2].
2) There are some bpf_func_proto structs marked as extern which can
instead be statically defined.
[1] https://lore.kernel.org/bpf/[email protected]/
[2] https://lore.kernel.org/bpf/62ab89f2.Pko7sI08RAKdF8R6%[email protected]/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Joanne Koong <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Before this commit, the BPF verifier required ARG_PTR_TO_MEM arguments
to be followed by ARG_CONST_SIZE holding the size of the memory region.
The helpers had to check that size in runtime.
There are cases where the size expected by a helper is a compile-time
constant. Checking it in runtime is an unnecessary overhead and waste of
BPF registers.
This commit allows helpers to accept pointers to memory without the
corresponding ARG_CONST_SIZE, given that they define the memory region
size in struct bpf_func_proto and use ARG_PTR_TO_FIXED_SIZE_MEM type.
arg_size is unionized with arg_btf_id to reduce the kernel image size,
and it's valid because they are used by different argument types.
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
uprobes work by raising a trap, setting a task flag from within the
interrupt handler, and processing the actual work for the uprobe on the
way back to userspace. As a result, uprobe handlers already execute in a
might_fault/_sleep context. The primary obstacle to sleepable bpf uprobe
programs is therefore on the bpf side.
Namely, the bpf_prog_array attached to the uprobe is protected by normal
rcu. In order for uprobe bpf programs to become sleepable, it has to be
protected by the tasks_trace rcu flavor instead (and kfree() called after
a corresponding grace period).
Therefore, the free path for bpf_prog_array now chains a tasks_trace and
normal grace periods one after the other.
Users who iterate under tasks_trace read section would
be safe, as would users who iterate under normal read sections (from
non-sleepable locations).
The downside is that the tasks_trace latency affects all perf_event-attached
bpf programs (and not just uprobe ones). This is deemed safe given the
possible attach rates for kprobe/uprobe/tp programs.
Separately, non-sleepable programs need access to dynamically sized
rcu-protected maps, so bpf_run_prog_array_sleepables now conditionally takes
an rcu read section, in addition to the overarching tasks_trace section.
Signed-off-by: Delyan Kratunov <[email protected]>
Link: https://lore.kernel.org/r/ce844d62a2fd0443b08c5ab02e95bc7149f9aeb1.1655248076.git.delyank@fb.com
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In order to add a version of bpf_prog_run_array which accesses the
bpf_prog->aux member, bpf_prog needs to be more than a forward
declaration inside bpf.h.
Given that filter.h already includes bpf.h, this merely reorders
the type declarations for filter.h users. bpf.h users now have access to
bpf_prog internals.
Signed-off-by: Delyan Kratunov <[email protected]>
Link: https://lore.kernel.org/r/3ed7824e3948f22d84583649ccac0ff0d38b6b58.1655248076.git.delyank@fb.com
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
During TCP sockmap redirect pressure test, the following warning is triggered:
WARNING: CPU: 3 PID: 2145 at net/core/stream.c:205 sk_stream_kill_queues+0xbc/0xd0
CPU: 3 PID: 2145 Comm: iperf Kdump: loaded Tainted: G W 5.10.0+ #9
Call Trace:
inet_csk_destroy_sock+0x55/0x110
inet_csk_listen_stop+0xbb/0x380
tcp_close+0x41b/0x480
inet_release+0x42/0x80
__sock_release+0x3d/0xa0
sock_close+0x11/0x20
__fput+0x9d/0x240
task_work_run+0x62/0x90
exit_to_user_mode_prepare+0x110/0x120
syscall_exit_to_user_mode+0x27/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason we observed is that:
When the listener is closing, a connection may have completed the three-way
handshake but not accepted, and the client has sent some packets. The child
sks in accept queue release by inet_child_forget()->inet_csk_destroy_sock(),
but psocks of child sks have not released.
To fix, add sock_map_destroy to release psocks.
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jakub Sitnicki <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
|
This patch adds a new helper function
void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len);
which returns a pointer to the underlying data of a dynptr. *len*
must be a statically known value. The bpf program may access the returned
data slice as a normal buffer (eg can do direct reads and writes), since
the verifier associates the length with the returned pointer, and
enforces that no out of bounds accesses occur.
Signed-off-by: Joanne Koong <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|