aboutsummaryrefslogtreecommitdiff
path: root/include/linux/blktrace_api.h
AgeCommit message (Collapse)AuthorFilesLines
2011-10-31treewide: use __printf not __attribute__((format(printf,...)))Joe Perches1-1/+1
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [[email protected]: revert arch bits] Signed-off-by: Joe Perches <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-11blktrace: add FLUSH/FUA supportNamhyung Kim1-2/+3
Add FLUSH/FUA support to blktrace. As FLUSH precedes WRITE and/or FUA follows WRITE, use the same 'F' flag for both cases and distinguish them by their (relative) position. The end results look like (other flags might be shown also): - WRITE: W - WRITE_FLUSH: FW - WRITE_FUA: WF - WRITE_FLUSH_FUA: FWF Note that we reuse TC_BARRIER due to lack of bit space of act_mask so that the older versions of blktrace tools will report flush requests as barriers from now on. Cc: Steven Rostedt <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Reviewed-by: Jeff Moyer <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2011-06-13block: Add __attribute__((format(printf...) and fix falloutJoe Perches1-1/+2
Use the compiler to verify format strings and arguments. Fix fallout. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2011-03-03blktrace: Remove blk_fill_rwbs_rq.Tao Ma1-1/+0
If we enable trace events to trace block actions, We use blk_fill_rwbs_rq to analyze the corresponding actions in request's cmd_flags, but we only choose the minor 2 bits from it, so most of other flags(e.g, REQ_SYNC) are missing. For example, with a sync write we get: write_test-2409 [001] 160.013869: block_rq_insert: 3,64 W 0 () 258135 + = 8 [write_test] Since now we have integrated the flags of both bio and request, it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and blk_fill_rwbs_rq isn't needed any more. With this patch, after a sync write we get: write_test-2417 [000] 226.603878: block_rq_insert: 3,64 WS 0 () 258135 += 8 [write_test] Signed-off-by: Tao Ma <[email protected]> Acked-by: Jeff Moyer <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2010-08-07block: fix for block tracing build errorStephen Rothwell1-11/+15
block/compat_ioctl.c: In function 'compat_blkdev_ioctl': block/compat_ioctl.c:754: error: 'BLKTRACESETUP32' undeclared (first use in this function) Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2010-08-07block: push BKL into blktrace ioctlsArnd Bergmann1-0/+12
The blktrace driver currently needs the BKL, but we should not need to take that in the block layer, so just push it down into the driver itself. It is quite likely that the BKL is not actually required in blktrace code and could be removed in a follow-on patch. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2010-08-07block: remove wrappers for request type/flagsChristoph Hellwig1-1/+1
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2010-02-17percpu: add __percpu sparse annotations to core kernel subsystemsTejun Heo1-2/+2
Add __percpu sparse annotations to core subsystems. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. Signed-off-by: Tejun Heo <[email protected]> Reviewed-by: Christoph Lameter <[email protected]> Acked-by: Paul E. McKenney <[email protected]> Cc: Jens Axboe <[email protected]> Cc: [email protected] Cc: Rusty Russell <[email protected]> Cc: Dipankar Sarma <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Eric Biederman <[email protected]>
2009-10-01Add a tracepoint for block request remappingJun'ichi Nomura1-1/+1
Since 2.6.31 now has request-based device-mapper, it's useful to have a tracepoint for request-remapping as well as bio-remapping. This patch adds a tracepoint for request-remapping, trace_block_rq_remap(). Signed-off-by: Kiyoshi Ueda <[email protected]> Signed-off-by: Jun'ichi Nomura <[email protected]> Cc: Alasdair G Kergon <[email protected]> Cc: Li Zefan <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2009-10-01Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfsZdenek Kabelac1-0/+2
Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs introduced in commit 1d54ad6da9192fed5dd3b60224d9f2dfea0dcd82. Release kobject also in case the request_fn is NULL. Problem was noticed via kmemleak backtrace when some sysfs entries were note properly destroyed during device removal: unreferenced object 0xffff88001aa76640 (size 80): comm "lvcreate", pid 2120, jiffies 4294885144 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 f0 65 a7 1a 00 88 ff ff .........e...... 90 66 a7 1a 00 88 ff ff 86 1d 53 81 ff ff ff ff .f........S..... backtrace: [<ffffffff813f9cc6>] kmemleak_alloc+0x26/0x60 [<ffffffff8111d693>] kmem_cache_alloc+0x133/0x1c0 [<ffffffff81195891>] sysfs_new_dirent+0x41/0x120 [<ffffffff81194b0c>] sysfs_add_file_mode+0x3c/0xb0 [<ffffffff81197c81>] internal_create_group+0xc1/0x1a0 [<ffffffff81197d93>] sysfs_create_group+0x13/0x20 [<ffffffff810d8004>] blk_trace_init_sysfs+0x14/0x20 [<ffffffff8123f45c>] blk_register_queue+0x3c/0xf0 [<ffffffff812447e4>] add_disk+0x94/0x160 [<ffffffffa00d8b08>] dm_create+0x598/0x6e0 [dm_mod] [<ffffffffa00de951>] dev_create+0x51/0x350 [dm_mod] [<ffffffffa00de823>] ctl_ioctl+0x1a3/0x240 [dm_mod] [<ffffffffa00de8f2>] dm_compat_ctl_ioctl+0x12/0x20 [dm_mod] [<ffffffff81177bfd>] compat_sys_ioctl+0xcd/0x4f0 [<ffffffff81036ed8>] sysenter_dispatch+0x7/0x2c [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Zdenek Kabelac <[email protected]> Reviewed-by: Li Zefan <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2009-06-10tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCKLi Zefan1-2/+2
Fix building failures when CONFIG_BLOCK == n. Signed-off-by: Li Zefan <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2009-06-09tracing/events: convert block trace points to TRACE_EVENT()Li Zefan1-0/+13
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Steven Rostedt <[email protected]>
2009-05-06blktrace: correct remap namesAlan D. Brunelle1-2/+2
This attempts to clarify names utilized during block I/O remap operations (partition, volume manager). It correctly matches up the /from/ information for both device & sector. This takes in the concept from Kosaki Motohiro and extends it to include better naming for the "device_from" field. [ Impact: cleanup ] Signed-off-by: Alan D. Brunelle <[email protected]> Reviewed-by: Li Zefan <[email protected]> Reviewed-by: KOSAKI Motohiro <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2009-04-16blktrace: add trace/ to /sys/block/sdaLi Zefan1-0/+6
Impact: allow ftrace-plugin blktrace to trace device-mapper devices To trace a single partition: # echo 1 > /sys/block/sda/sda1/enable To trace the whole sda instead: # echo 1 > /sys/block/sda/enable Thus we also fix an issue reported by Ted, that ftrace-plugin blktrace can't be used to trace device-mapper devices. Now: # echo 1 > /sys/block/dm-0/trace/enable echo: write error: No such device or address # mount -t ext4 /dev/dm-0 /mnt # echo 1 > /sys/block/dm-0/trace/enable # echo blk > /debug/tracing/current_tracer Reported-by: Theodore Tso <[email protected]> Signed-off-by: Li Zefan <[email protected]> Acked-by: "Theodore Ts'o" <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Shawn Du <[email protected]> Cc: Jens Axboe <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2009-04-16blktrace: support per-partition tracingShawn Du1-11/+13
Though one can specify '-d /dev/sda1' when using blktrace, it still traces the whole sda. To support per-partition tracing, when we start tracing, we initialize bt->start_lba and bt->end_lba to the start and end sector of that partition. Note some actions are per device, thus we don't filter 0-sector events. The original patch and discussion can be found here: http://marc.info/?l=linux-btrace&m=122949374214540&w=2 Signed-off-by: Shawn Du <[email protected]> Signed-off-by: Li Zefan <[email protected]> Acked-by: "Theodore Ts'o" <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jens Axboe <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2009-02-19Merge branch 'linus' into tracing/blktraceIngo Molnar1-0/+1
Conflicts: block/blktrace.c Semantic merge: kernel/trace/blktrace.c Signed-off-by: Ingo Molnar <[email protected]>
2009-02-18block: fix bad definition of BIO_RW_SYNCJens Axboe1-0/+1
We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417fec62ef4c3675621b9364a667954d4dd. Signed-off-by: Jens Axboe <[email protected]>
2009-02-03Merge branches 'tracing/ftrace', 'tracing/kmemtrace' and 'linus' into ↵Ingo Molnar1-0/+1
tracing/core
2009-01-30headers_check fix: linux/blktrace_api.hJaswinder Singh Rajput1-0/+1
fix the following 'make headers_check' warning: usr/include/linux/blktrace_api.h:96: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <[email protected]>
2009-01-26tracing/blktrace: fix up checkpatch reported problems in ftrace plugin patchArnaldo Carvalho de Melo1-0/+5
Also make sure sparse (make C=2 block/blktrace.o) is happy too. Reported-by: Ingo Molnar <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2008-11-26blktrace: port to tracepointsArnaldo Carvalho de Melo1-169/+3
This was a forward port of work done by Mathieu Desnoyers, I changed it to encode the 'what' parameter on the tracepoint name, so that one can register interest in specific events and not on classes of events to then check the 'what' parameter. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2008-10-17blktrace: add support for driver dataStefan Raspl1-0/+32
This patch adds the new api call blk_add_driver_data() to blktrace. It allows to trace device driver-specific binary data. Signed-off-by: Stefan Raspl <[email protected]> Signed-off-by: Martin Peschke <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2008-10-09blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structureJens Axboe1-5/+3
Define as 32, which is is what BDEVNAME_SIZE is/was as well. This keeps the user interface the same and gets rid of the difference between kernel and user api here. Signed-off-by: Jens Axboe <[email protected]>
2008-10-09include blktrace_api.h in headers_installSven Schuetz1-26/+32
This header file is of interest for user space programming, i.e. for tools that process blktrace data. We would like to use it for a tool on-top of blktrace which processes data provided by blktrace. For this purpose, it would be helpful if the blktrace API would make it to /usr/include/linux. The git tree for the blktrace tools comes with its own copy of this header file. I didn't manage to replace that copy with the file generated by the patch below yet. A few more cleanups would be needed. For example, the blktrace ioctl numbers, which are currently defined in usr/include/fs.h, might need to be moved. Should be feasible, though. Signed-off-by: Sven Schuetz <[email protected]> Signed-off-by: Martin Peschke <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2008-10-09block: Add interface to abort queued requestsMike Anderson1-0/+2
Signed-off-by: Mike Anderson <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2008-10-09blktrace: support discard requestsDavid Woodhouse1-0/+4
Signed-off-by: David Woodhouse <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2008-07-03Added in user-injected messages into blk tracesAlan D. Brunelle1-0/+1
This allows a user to annotate the blk trace stream: writing a suitable message to {/sys/kernel/debug}/block/<dsf>/msg will have it propagated into the trace stream. Signed-off-by: Alan D. Brunelle <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2008-05-28block: make blktrace use per-cpu buffers for message notesJens Axboe1-1/+2
Currently it uses a single static char array, but that risks being corrupted when multiple users issue message notes at the same time. Make the buffers dynamically allocated when the trace is setup and make them per-cpu instead. The default max message size of 1k is also very large, the interface is mainly for small text notes. So shrink it to 128 bytes. Signed-off-by: Jens Axboe <[email protected]>
2008-05-28Added in MESSAGE notes for blktracesAlan D. Brunelle1-0/+25
Allows messages to be inserted into blktrace streams. Signed-off-by: Alan D. Brunelle <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2008-01-29Fix blktrace compile warningMartin K. Petersen1-3/+3
request_queue_t is deprecated Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2008-01-28blktrace: Add blktrace ioctls to SCSI generic devicesChristof Schmitt1-2/+10
Since the SCSI layer uses the request queues from the block layer, blktrace can also be used to trace the requests to all SCSI devices (like SCSI tape drives), not only disks. The only missing part is the ioctl interface to start and stop tracing. This patch adds the SETUP, START, STOP and TEARDOWN ioctls from blktrace to the sg device files. With this change, blktrace can be used for SCSI devices like for disks, e.g.: blktrace -d /dev/sg1 -o - | blkparse -i - Signed-off-by: Christof Schmitt <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2007-10-12[BLOCK] Better fix for do_blk_trace_setup() for !CONFIG_BLOCKJens Axboe1-6/+1
We don't have the request queue definition, so just make it a macro instead. Signed-off-by: Jens Axboe <[email protected]>
2007-10-11[BLOCK] Fix failing compile with BLK_DEV_IO_TRACE=nBoaz Harrosh1-1/+6
I get a compilation error in sglist-arch branch with BLK_DEV_IO_TRACE=n: CC block/compat_ioctl.o /usr0/export/dev/bharrosh/git/pub/linux-2.6-block/block/compat_ioctl.c: In function ?compat_blk_trace_setup?: /usr0/export/dev/bharrosh/git/pub/linux-2.6-block/block/compat_ioctl.c:568: error: expected expression before ?do? make[2]: *** [block/compat_ioctl.o] Error 1 Signed-off-by: Jens Axboe <[email protected]>
2007-10-10compat_ioctl: handle blk_trace ioctlsArnd Bergmann1-1/+6
blk_trace_setup is broken on x86_64 compat systems, this makes the code work correctly on all 64 bit architectures in compat mode. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2007-08-11Fix remap handling by blktraceAlan D. Brunelle1-1/+2
This patch provides more information concerning REMAP operations on block IOs. The additional information provides clearer details at the user level, and supports post-processing analysis in btt. o Adds in partition remaps on the same device. o Fixed up the remap information in DM to be in the right order o Sent up mapped-from and mapped-to device information Signed-off-by: Alan D. Brunelle <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2007-07-24[BLOCK] Get rid of request_queue_t typedefJens Axboe1-1/+1
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <[email protected]>
2006-12-01[PATCH] blktrace: add timestamp messageOlaf Kirch1-0/+12
This adds a new timestamp message to blktrace, giving the timeofday when we starting tracing. This helps user space correlate block trace events with eg an application strace. This requires a (compatible) update to blkparse. The changed blkparse is still able to process traces generated by older kernels, and older versions of blkparse should silently ignore the new records (because they have a pid of 0). Signed-off-by: Olaf Kirch <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2006-09-30[PATCH] blktrace: support for logging metadata readsJens Axboe1-0/+1
Signed-off-by: Jens Axboe <[email protected]>
2006-09-30[PATCH] Split struct request ->flags into two partsJens Axboe1-1/+1
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe <[email protected]>
2006-07-06[PATCH] Only the first two bits in bio->bi_rw and rq->flags matchJens Axboe1-1/+1
Not three, as assumed. This causes the barrier bit to be needlessly set for some IO. Signed-off-by: Jens Axboe <[email protected]>
2006-07-06[PATCH] blktrace: readahead supportNathan Scott1-0/+1
Provide the needed kernel support for distinguishing readahead from regular read requests when tracing block devices. Signed-off-by: Nathan Scott <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2006-07-06[PATCH] blktrace: fix barrier vs sync typoNathan Scott1-1/+1
Signed-off-by: Nathan Scott <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2006-06-23[PATCH] blktrace_api.h: endian annotationsAlexey Dobriyan1-3/+3
Signed-off-by: Alexey Dobriyan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse1-1/+0
Signed-off-by: David Woodhouse <[email protected]>
2006-03-23[PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23Jens Axboe1-0/+277
Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.