Age | Commit message (Collapse) | Author | Files | Lines |
|
'clk-qcom-spi' and 'clk-qcom-videocc-binding' into clk-next
- Qualcomm SDM845 GPU clock controllers
- Qualcomm QCS404 RPM clk support
* clk-qcom-kconfig:
clk: qcom: Move to menuconfig and reduce lines
* clk-qcom-gpucc:
dt-bindings: clock: qcom: Fix the xo parent in gpucc example
clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6
clk: qcom: Add a dummy enable function for GX gdsc
clk: qcom: gdsc: Don't override existing gdsc pd functions
clk: qcom: Add graphics clock controller driver for SDM845
dt-bindings: clock: Introduce QCOM Graphics clock bindings
* clk-qcom-qcs404-rpm:
clk: qcom: smd: Add support for QCS404 rpm clocks
* clk-qcom-spi:
clk: qcom: msm8916: Additional clock rates for spi
* clk-qcom-videocc-binding:
dt-bindings: clock: Require #reset-cells in sdm845-videocc
|
|
This patch adds bindings required for DISPLAY_PORT_RX
port on AFE.
Signed-off-by: Rohit kumar <[email protected]>
Acked-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
The dt-bindings header for TI K3 AM6 SoCs define a set of macros for
defining pinmux configs in human readable form, instead of raw-coded
hex values.
Signed-off-by: Vignesh R <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Nishanth Menon <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Tero Kristo <[email protected]>
|
|
The Low-Power Clock Gate (LPCG) modules contain a local programming
model to control the clock gates for the peripherals. An LPCG module
is used to locally gate the clocks for the associated peripheral.
Note:
This level of clock gating is provided after the clocks are generated
by the SCU resources and clock controls. Thus even if the clock is
enabled by these control bits, it might still not be running based
on the base resource.
Cc: Stephen Boyd <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: [email protected]
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Dong Aisheng <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Add IMX8QXP SCU clock IDs.
Cc: Stephen Boyd <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Dong Aisheng <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers change for 4.21:
- A series from Aisheng that improves SCU power domain bindings by
defining '#power-domain-cells' as 1, and adds i.MX8 SCU power domain
driver support on top of it.
- A series from Lucas that updates gpcv2 driver for scalability and
adds i.MX8MQ support into the driver.
- Increase gpc driver GPC_CLK_MAX definition to 7, as DISPLAY power
domain on imx6sx has 7 clocks.
* tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
firmware: imx: add SCU power domain driver
firmware: imx: add pm svc headfile
dt-bindings: fsl: scu: update power domain binding
firmware: imx: remove resource id enums
dt-bindings: imx: add scu resource id headfile
Signed-off-by: Olof Johansson <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Renesas ARM Based SoC Drivers Updates for v4.21
SYSC Driver:
* Common
- Fix power domain control after system resume
- Merge PM Domain registration and linking
- Remove rcar_sysc_power_{down,up}() helpers
* R-Car E3 (r8a77990) SoC
- Fix initialization order of 3DG-{A,B}
* R-Car V3H (r8a77980) SoC
- Correct A3VIP[012] power domain hierarchy
- Correct names of A2DP[01] power domains
* R-Car V3M (r8a77970) SoC
- Correct names of A2DP/A2CN power domains
- emove non-existent CR7 power domain
* R-Car M3-N (r8a77965) SoC
- Remove non-existent A3IR power domain
* tag 'renesas-drivers-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
soc: renesas: r8a77980-sysc: Correct A3VIP[012] power domain hierarchy
soc: renesas: r8a77980-sysc: Correct names of A2DP[01] power domains
soc: renesas: r8a77970-sysc: Correct names of A2DP/A2CN power domains
soc: renesas: r8a77970-sysc: Remove non-existent CR7 power domain
soc: renesas: r8a77965-sysc: Remove non-existent A3IR power domain
Signed-off-by: Olof Johansson <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
ARM: dts: Amlogic updates for v4.21, round 2
Highlights
- add CPU OPP tables
- timers: add global timer and TWD
* tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: meson8b: add the CPU OPP tables
ARM: dts: meson: meson8: add the CPU OPP table
ARM: dts: meson8b: add the Cortex-A5 global timer
ARM: dts: meson8b: add the ARM TWD timer
ARM: dts: meson8: add the Cortex-A9 global timer
ARM: dts: meson8: add the ARM TWD timer
ARM: dts: meson: group the Cortex-A5 / Cortex-A9 peripherals
dt-bindings: clock: meson8b: export the CPU post dividers
Signed-off-by: Olof Johansson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX7ULP device tree for 4.21:
- It includes the initial device tree for i.MX7ULP SoC and EVK board
support.
* tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: add imx7ulp evk support
ARM: dts: imx: add common imx7ulp dtsi support
dt-bindings: fsl: add imx7ulp pm related components bindings
dt-bindings: fsl: add compatible for imx7ulp evk
clk: imx: add imx7ulp clk driver
clk: imx: implement new clk_hw based APIs
clk: imx: make mux parent strings const
dt-bindings: clock: add imx7ulp clock binding doc
clk: imx: add imx7ulp composite clk support
clk: imx: add pfdv2 support
clk: imx: add pllv4 support
clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
clk: imx: add gatable clock divider support
Signed-off-by: Olof Johansson <[email protected]>
|
|
The regulator supports a dedicated suspend mode.
Implement the appropriate ->set_suspend_xx() hooks, add support for
->set_mode(), and provide basic PM ops functionalities to setup the
regulator in a suspend state when the system is entering suspend.
Signed-off-by: Boris Brezillon <[email protected]>
[[email protected]: remove shutdown function, use dev_pm_ops,
fix checkpatch warning, adapt commit message, add LDO modes support,
move modes constants to active-semi,8945a-regulator.h, remove rdevs from
struct act8945a_pmic, add op_mode to act8945a_pmic]
Signed-off-by: Claudiu Beznea <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
commit c0cb7c7e7164 ("clk: qcom: Enumerate remaining msm8998 resets")
missed two USB2 resets. Add them.
Fixes: c0cb7c7e7164 ("clk: qcom: Enumerate remaining msm8998 resets")
Signed-off-by: Jeffrey Hugo <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
dt-bindings: Changes for v4.21-rc1
This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.
* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra186-pmc: Add interrupt controller properties
dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
dt: bindings: Move tegra20-emc binding to memory-controllers directory
dt: bindings: tegra20-emc: Document clock property
dt: bindings: tegra20-emc: Document interrupt property
dt-bindings: usb: xhci-tegra: Add power-domain details
Signed-off-by: Olof Johansson <[email protected]>
|
|
On i.MX6QP/i.MX6Q/i.MX6DL, there are DCIC1/DCIC2 clocks
gate in CCM_CCGR0 register, add them into clock tree for
clock management.
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Subsequent generations of Tegra, such as Tegra194, contain a completely
different set of GPIOs. In order to clarify that the Tegra186 defines
are indeed specific to Tegra186, change the prefix from TEGRA_ to
TEGRA186_.
Note that for now we need to keep the old definitions in place to avoid
breaking compilation in file that use this header. Once all users have
been converted to use the new defines, the old ones can be removed.
Also note that this is only a naming change and doesn't affect device
tree ABI.
Signed-off-by: Thierry Reding <[email protected]>
Acked-by: Jon Hunter <[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Add clkref clocks for usb3, hdmi, ufs, pcie, and usb2. They are all
sourced off CXO_IN, so parent them off "xo" until a proper link to the
rpmcc can be described in DT.
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
The current list of defined resets is incomplete compared to what the
hardware implements. Enumerate the remaining resets according to the
hardware documentation.
Signed-off-by: Jeffrey Hugo <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
The GPCv2 on the Freescale i.MX8MQ SoC works in the same way as the
GPCv2 on the i.MX7, but only controls more power domains with a
different mapping.
Signed-off-by: Lucas Stach <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) added
the CPEX clock on R-Car D3. This clock can be selected as a clock
source for CMT1 (Compare Match Timer Type 1).
Add the missing clock to the DT bindings header, and implement support
for it in the clock driver.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
|
|
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Dec 22, 2017, and
Feb 28, 2018) removed the SSPSRC, SSP1, and SSP2 clocks on R-Car D3, as
this SoC does not have a Stream and Security Processor.
As these definitions were never used, they can just be removed.
The freed slots in the DT bindings header must not be reused, though.
Fixes: 714c53aa2e2d6d60 ("clk: renesas: Add r8a77995 CPG Core Clock Definitions")
Fixes: d71e851d82c6cfe5 ("clk: renesas: cpg-mssr: Add R8A77995 support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
|
|
The R-Car Gen3 HardWare Manual Errata for Rev. 0.52 (Nov 30, 2016)
removed the CSI reference clock on R-Car M3-W.
As this definition was never used, it can just be removed.
The freed slot in the DT bindings header must not be reused, though.
Fixes: 972610fb23b08dd5 ("clk: renesas: Add r8a7796 CPG Core Clock Definitions")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
|
|
The R-Car Gen3 HardWare Manual Errata for Rev. 0.52 (Nov 30, 2016)
removed the CSI reference clock on R-Car H3.
As this definition was never used, it can just be removed.
The freed slot in the DT bindings header must not be reused, though.
Fixes: 9d0c3c682033d3f1 ("clk: shmobile: Add r8a7795 CPG Core Clock Definitions")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
|
|
Add compatiple string for Allwinner suniv F1C100s CCU.
Add clock and reset definitions.
Signed-off-by: Mesih Kilinc <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
|
|
into next/drivers
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.21, please pull the following changes:
- James fixes the firmware interface after a commit changed the use of
VLA and broke large transfers
- Stefan adds a timeout check for Raspberry Pi firmware transactions and
updates a bunch of SoC/firmware files to use SPDX tags
- Wolfram switches the GISB bus arbiter to use dev_get_drvdata()
- Yangtao provides a fix for a reference leak due to a call to
of_find_node_by_path()
- Florian fixes the CPU re-entry point out of S3 suspend with kernels
built in Thumb2 mode
* tag 'arm-soc/for-4.21/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: brcmstb: Don't leak device tree node reference
firmware: raspberrypi: Switch to SPDX identifier
firmware: raspberrypi: Fix firmware calls with large buffers
soc: bcm: Switch raspberrypi-power to SPDX identifier
firmware: raspberrypi: Define timeout for transactions
bus: brcmstb_gisb: simplify getting .driver_data
soc: bcm: brcmstb: Fix re-entry point with a THUMB2_KERNEL
Signed-off-by: Olof Johansson <[email protected]>
|
|
i.MX7ULP Clock functions are under joint control of the System
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
modules, and Core Mode Controller (CMC)1 blocks
Note IMX7ULP has two clock domains: M4 and A7. This binding doc
is only for A7 clock domain.
Cc: Rob Herring <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Michael Turquette <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Anson Huang <[email protected]>
Cc: Bai Ping <[email protected]>
Signed-off-by: Dong Aisheng <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
SPDX-License-Identifier is used for the Xilinx Video IP and
related drivers.
[Added drivers/media/platform/xilinx/Kconfig]
[Added drivers/media/platform/xilinx/Makefile]
[Added include/dt-bindings/media/xilinx-vip.h]
Signed-off-by: Dhaval Shah <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This adds the binding for the i.MX8MQ Clock Controller Module.
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Add device tree bindings for Low Power Audio subsystem clock controller for
Qualcomm Technology Inc's SDM845 SoCs.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Taniya Das <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
renamed the A3VIP power domain on R-Car V3H to A3VIP0, and clarified the
power domain hierarchy for the A3VIP[012] power domains.
As the definition for the A3VIP0 domain is not yet used from DT, it can
just be renamed.
Fixes: 7755b40d07a8dba7 ("dt-bindings: power: add R8A77980 SYSC power domain definitions")
Fixes: 41d6d8bd8ae94ca9 ("soc: renesas: rcar-sysc: add R8A77980 support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
renamed the A2PD0 and A2DP0 power domains on R-Car V3H to A2DP0 resp.
A2DP1.
As these definitions are not yet used from DT, they can just be renamed.
Fixes: 7755b40d07a8dba7 ("dt-bindings: power: add R8A77980 SYSC power domain definitions")
Fixes: 41d6d8bd8ae94ca9 ("soc: renesas: rcar-sysc: add R8A77980 support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
renamed the A2IR2 and A2IR3 power domains on R-Car V3M to A2DP resp.
A2CN.
As these definitions are not yet used from DT, they can just be renamed.
While at it, fix the indentation of the A3IR definition.
Fixes: 833bdb47c826a1a6 ("dt-bindings: power: add R8A77970 SYSC power domain definitions")
Fixes: bab9b2a74fe9da96 ("soc: renesas: rcar-sysc: add R8A77970 support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018)
removed the CR7 power domain on R-Car V3M, as this SoC does not have an
ARM Cortex-R7 Realtime Core.
As this definition was never used from DT, it can just be removed.
Fixes: 833bdb47c826a1a6 ("dt-bindings: power: add R8A77970 SYSC power domain definitions")
Fixes: bab9b2a74fe9da96 ("soc: renesas: rcar-sysc: add R8A77970 support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
Add all supported clocks exported from every susbystem found on MT7629 SoC.
Signed-off-by: Wenzhen Yu <[email protected]>
Signed-off-by: Ryder Lee <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SDM845 SoCs.
Signed-off-by: Amit Nischal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
[[email protected]: Add input clocks property]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
The thermal controller implementation on Tegra194 is very similar to the
implementation on Tegra186. Add a compatible string for the new
generation.
Signed-off-by: Thierry Reding <[email protected]>
|
|
|
|
This patch adds clock ID of audio CODEC (ACODEC) for rk3328.
Signed-off-by: Katsuhiro Suzuki <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: sh-pfc: Updates for v4.21
- Fix VIN (Video IN) versioned groups on R-Car V2H, H3, and M3-W,
- Add I2C[0-3], DU1, VIN, QSPI1, and SDHI pin groups on RZ/G1C,
- Add audio, SDHI, VIN, HSCIF, and CAN(FD) support on R-Car E3,
- Add QSPI pin groups on R-Car V3M and V3H,
- Add VIN and CAN(FD) pin groups on R-Car M3-N,
- Add I2C[035] pin groups on R-Car H3 and M3-W,
- Add pinctrl and GPIO support for the new RZ/A2M (R7S9210) SoC,
- Small cleanups,
- Maintainership updates.
|
|
This patch for the DesignWare AHB Central
Direct Memory Access Controller adds the dma
protection control property:
"snps,dma-protection-control"
as well as the properties specific values defines into
a new include file: include/dt-bindings/dma/dw-dmac.h
Note: The protection control signals are one-to-one
mapped to the AHB HPROT[1:3] signals for this controller.
The HPROT0 (Data Access) is always hardwired to 1.
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
|
|
Add the video clock bindings covering all the video graphics pipeline
and the HDMI controller.
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Jerome Brunet <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
There are four CPU clock post dividers:
- ABP
- PERIPH (used as input for the ARM global timer and ARM TWD timer)
- AXI
- L2 DRAM
Export these so we can use them in .dts files.
Signed-off-by: Martin Blumenstingl <[email protected]>
Acked-by: Jerome Brunet <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Add device tree binding documentation and header file for Renesas R7S9210
(RZ/A2) SoCs.
Signed-off-by: Chris Brandt <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
This patch fixes mistakes in HCLK_I2S1_8CH for running I2S1
successfully.
Signed-off-by: Katsuhiro Suzuki <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Adopt the SPDX license identifier headers to ease license compliance
management.
Cc: Simon Arlott <[email protected]>
Cc: Stephen Warren <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
This is the clock for the "security processor" core.
Signed-off-by: Lubomir Rintel <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Add devicetree bindings for Mediatek MT6797 SoC Pin Controller.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
Adopt the SPDX license identifier headers to ease license compliance
management.
Cc: Simon Arlott <[email protected]>
Cc: Stephen Warren <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Adopt the SPDX license identifier headers to ease license compliance
management.
Cc: Alexander Aring <[email protected]>
Cc: Eric Anholt <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
|
|
SCU firmware uses resource id to provide services. Every device on
a SCU based system has a resource id. Exported it in device tree to
allow service bindings to use it. e.g. power domain.
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: [email protected]
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Dong Aisheng <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Add rpm smd clocks, PMIC and bus clocks which are required on QCS404
for clients to vote on.
Signed-off-by: Taniya Das <[email protected]>
Signed-off-by: Anu Ramanathan <[email protected]>
[bjorn: Dropped cxo, voter clocks and static initialization]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
This commit adds necessary description and dt includes for H6 DE3 clock.
It is very similar to others, but memory region has some additional
registers not found in DE2.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
|