aboutsummaryrefslogtreecommitdiff
path: root/include/dt-bindings/clock
AgeCommit message (Collapse)AuthorFilesLines
2020-12-21Merge tag 'clk-for-linus' of ↵Linus Torvalds10-11/+368
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...
2020-12-20Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and ↵Stephen Boyd1-11/+45
'clk-marvell' into clk-next - Bindings for Canaan K210 SoC clks * clk-ingenic: clk: ingenic: Fix divider calculation with div tables * clk-vc5: clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" * clk-cleanup: clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: bcm: dvp: Add MODULE_DEVICE_TABLE() clk: bcm: dvp: drop a variable that is assigned to only * clk-canaan: dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix * clk-marvell: clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
2020-12-20Merge branches 'clk-ti', 'clk-analog', 'clk-trace', 'clk-at91' and ↵Stephen Boyd1-0/+11
'clk-silabs' into clk-next - Add some trace points for clk_set_rate() "range" functions - DVFS support for AT91 clk driver * clk-ti: clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERs clk: ti: Fix memleak in ti_fapll_synth_setup * clk-analog: clk: axi-clkgen: move the OF table at the bottom of the file clk: axi-clkgen: wrap limits in a struct and keep copy on the state object dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format * clk-trace: clk: Trace clk_set_rate() "range" functions * clk-at91: clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error * clk-silabs: clk: si5351: Wait for bit clear after PLL reset
2020-12-20Merge branches 'clk-tegra', 'clk-imx', 'clk-sifive', 'clk-mediatek' and ↵Stephen Boyd1-0/+23
'clk-summary' into clk-next - Support for SiFive FU740 PRCI - Add hardware enable information to clk_summary debugfs * clk-tegra: clk: tegra: Fix duplicated SE clock entry clk: tegra: bpmp: Clamp clock rates on requests clk: tegra: Do not return 0 on failure * clk-imx: (24 commits) clk: imx: scu: remove the calling of device_is_bound clk: imx: scu: Make pd_np with static keyword clk: imx8mq: drop of_match_ptr from of_device_id table clk: imx8mp: drop of_match_ptr from of_device_id table clk: imx8mn: drop of_match_ptr from of_device_id table clk: imx8mm: drop of_match_ptr from of_device_id table clk: imx: gate2: Remove unused variable ret clk: imx: gate2: Add locking in is_enabled op clk: imx: gate2: Add cgr_mask for more flexible number of control bits clk: imx: gate2: Check if clock is enabled against cgr_val clk: imx: gate2: Keep the register writing in on place clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case clk: imx: scu: fix build break when compiled as modules clk: imx: remove redundant assignment to pointer np clk: imx: remove unneeded semicolon clk: imx: lpcg: add suspend/resume support clk: imx: clk-imx8qxp-lpcg: add runtime pm support clk: imx: lpcg: allow lpcg clk to take device pointer clk: imx: imx8qxp-lpcg: add parsing clocks from device tree clk: imx: scu: add suspend/resume support ... * clk-sifive: clk: sifive: Add clock enable and disable ops clk: sifive: Fix the wrong bit field shift clk: sifive: Add a driver for the SiFive FU740 PRCI IP block clk: sifive: Use common name for prci configuration clk: sifive: Extract prci core to common base dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI * clk-mediatek: clk: mediatek: Make mtk_clk_register_mux() a static function * clk-summary: clk: Add hardware-enable column to clk summary
2020-12-20Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and ↵Stephen Boyd3-0/+42
'clk-unused' into clk-next - Replace clk-provider.h with of_clk.h when possible * clk-amlogic: clk: meson: g12a: add MIPI DSI Host Pixel Clock dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings clk: meson: enable building as modules clk: meson: Kconfig: fix dependency for G12A clk: meson: axg: add MIPI DSI Host clock clk: meson: axg: add Video Clocks dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks * clk-rockchip: clk: rockchip: fix i2s gate bits on rk3066 and rk3188 clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks clk: rockchip: Remove redundant null check before clk_prepare_enable clk: rockchip: Add appropriate arch dependencies * clk-of: xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h> sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h> * clk-freescale: clk: fsl-flexspi: new driver dt-bindings: clock: document the fsl-flexspi-clk device clk: divider: add devm_clk_hw_register_divider_table() clk: qoriq: provide constants for the type clk: fsl-sai: use devm_clk_hw_register_composite_pdata() clk: composite: add devm_clk_hw_register_composite_pdata() clk: fsl-sai: fix memory leak clk: qoriq: Add platform dependencies * clk-unused: clk: scpi: mark scpi_clk_match as maybe unused clk: pwm: drop of_match_ptr from of_device_id table
2020-12-20dt-binding: clock: Document canaan,k210-clk bindingsDamien Le Moal1-11/+45
Document the device tree bindings of the Canaan Kendryte K210 SoC clock driver in Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml. The header file include/dt-bindings/clock/k210-clk.h is modified to include the complete list of IDs for all clocks of the SoC. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-12-19clk: at91: sama7g5: register cpu clockClaudiu Beznea1-0/+1
Register CPU clock as being the master clock prescaler. This would be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the frequencies supported by SAMA7G5 could be directly received from CPUPLL + master clock prescaler and the extra divider would do no work in case it would be enabled. Signed-off-by: Claudiu Beznea <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-12-19dt-bindings: clock: at91: add sama7g5 pll definesEugen Hristev1-0/+10
Add SAMA7G5 specific PLL defines to be referenced in a phandle as a PMC_TYPE_CORE clock. Suggested-by: Claudiu Beznea <[email protected]> Signed-off-by: Eugen Hristev <[email protected]> [[email protected]: adapt comit message, adapt sama7g5.c] Signed-off-by: Claudiu Beznea <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-12-16Merge tag 'arm-soc-omap-genpd-5.11' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC OMAP GenPD updates from Arnd Bergmann: "These are additional updates for the power domain support on OMAP, moving to an implementation based on device tree information instead of SoC specific code. This is the latest step in the ongoing process for moving code out of arch/arm/mach-omap2. I kept this separate from the other driver changes since it touches code in multiple areas" * tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Fix am4 only build after genpd changes ARM: dts: Configure power domain for omap5 dss ARM: dts: omap5: add remaining PRM instances soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances ARM: OMAP2+: Drop legacy platform data for dra7 gpmc ARM: dts: Configure interconnect target module for dra7 iva ARM: dts: dra7: add remaining PRM instances soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy platform data for omap4 gpmc ARM: OMAP2+: Drop legacy platform data for omap4 iva ARM: dts: Configure power domain for omap4 dsp ARM: dts: Configure power domain for omap4 dss ARM: dts: omap4: add remaining PRM instances soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy remaining legacy platform data for am4 ARM: dts: Use simple-pm-bus for genpd for am4 l3 ARM: dts: Move am4 l3 noc to a separate node ARM: dts: Use simple-pm-bus for genpd for am4 l4_per ...
2020-12-16Merge tag 'arm-soc-dt-5.11' of ↵Linus Torvalds2-0/+39
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM device tree updates from Arnd Bergmann: "Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards" * tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits) arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ARM: mstar: SMP support ARM: mstar: Wire up smpctrl for SSD201/SSD202D ARM: mstar: Add smp ctrl registers to infinity2m dtsi ARM: mstar: Add dts for Honestar ssd201htv2 ARM: mstar: Add chip level dtsi for SSD202D ARM: mstar: Add common dtsi for SSD201/SSD202D ARM: mstar: Add infinity2m support dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards dt-bindings: vendor-prefixes: Add honestar vendor prefix dt-bindings: mstar: Add binding details for mstar,smpctrl ARM: mstar: Fill in GPIO controller properties for infinity ARM: mstar: Add gpio controller to MStar base dtsi ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ...
2020-12-16clk: sifive: Add a driver for the SiFive FU740 PRCI IP blockZong Li1-0/+23
Add driver code for the SiFive FU740 PRCI IP block. This IP block handles reset and clock control for the SiFive FU740 device and implements SoC-level clock tree controls and dividers. The link of unmatched as follow, and the U740-C000 manual would be present in the same page as soon. https://www.sifive.com/boards/hifive-unmatched This driver contains bug fixes and contributions from Henry Styles <[email protected]> Erik Danie <[email protected]> Pragnesh Patel <[email protected]> Signed-off-by: Zong Li <[email protected]> Reviewed-by: Pragnesh Patel <[email protected]> Acked-by: Palmer Dabbelt <[email protected]> Cc: Henry Styles <[email protected]> Cc: Erik Danie <[email protected]> Cc: Pragnesh Patel <[email protected]> Link: https://lore.kernel.org/r/[email protected] [[email protected]: Include header to silence sparse] Signed-off-by: Stephen Boyd <[email protected]>
2020-12-10clk: qcom: rpmh: add support for SM8350 rpmh clocksVinod Koul1-0/+8
This adds the RPMH clocks present in SM8350 SoC Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] [[email protected]: Move sdx55 to the right place] Signed-off-by: Stephen Boyd <[email protected]>
2020-12-08Merge tag 'imx-bindings-5.11' of ↵Arnd Bergmann1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.11: - Quite some patches that update vendor-prefixes.yaml and fsl.yaml to document missing board compatibles and add new board compatibles. - A couple of patches from Dong Aisheng to update imx-scu firmware and imx-lpcg clock bindings for new SCU two cells clock support. - A couple of net bindings update from Ioana Ciornei to complete the MAC/PCS/PHY representation on DPAA2 devices. - Document watchdog compatibles for all i.MX and Layerscape devices. * tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits) dt-bindings: arm: fsl: add Protonic WD3 board dt-bindings: vendor-prefixes: add "virtual" prefix dt-bindings: fsl: add kamstrup flex concentrator to schema dt-bindings: arm: fsl: document i.MX7S boards dt-bindings: arm: fsl: document SolidRun LX2160A boards dt-bindings: arm: fsl: document LS1012A FRWY board dt-bindings: arm: fsl: add Van der Laan LANMCU board dt-bindings: arm: fsl: add Altesco I6P board dt-bindings: vendor-prefixes: Add an entry for Altus-Escon-Company dt-bindings: net: add the 10gbase-r connection type dt-bindings: net: add the DPAA2 MAC DTS definition dt-bindings: fsl: add compatible for LX2162A QDS Board dt-bindings: vendor-prefixes: Add an entry for Van der Laan b.v. dt-bindings: arm: fsl: document i.MX7D boards dt-bindings: arm: fsl: document i.MX6ULL boards dt-bindings: arm: fsl: document i.MX6UL boards dt-bindings: arm: fsl: document i.MX6SX boards dt-bindings: arm: fsl: document i.MX6SL boards dt-bindings: arm: fsl: document i.MX6QP boards dt-bindings: arm: fsl: document i.MX6Q boards ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-12-07dt-bindings: clock: Add GDSC in SDX55 GCCManivannan Sadhasivam1-0/+5
Add GDSC instances in SDX55 GCC block. Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2020-12-07dt-bindings: clock: Introduce RPMHCC bindings for SDX55Vinod Koul1-0/+1
Add compatible for SDX55 RPMHCC and DT include. Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-12-07dt-bindings: clock: Add SDX55 GCC clock bindingsVinod Koul1-0/+112
Add device tree bindings for global clock controller on SDX55 SoCs. Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-12-07clk: qoriq: provide constants for the typeMichael Walle1-0/+15
To avoid future mistakes in the device tree for the clockgen module, add constants for the clockgen subtype as well as a macro for the PLL divider. Signed-off-by: Michael Walle <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-12-03dt-bindings: timer: Add new OST support for the upcoming new driver.周琰杰 (Zhou Yanjie)1-3/+7
The new OST has one global timer and two or four percpu timers, so there will be three combinations in the upcoming new OST driver: the original GLOBAL_TIMER + PERCPU_TIMER, the new GLOBAL_TIMER + PERCPU_TIMER0/1 and GLOBAL_TIMER + PERCPU_TIMER0/1/2/3, For this, add the macro definition about OST_CLK_PERCPU_TIMER0/1/2/3. And in order to ensure that all the combinations work normally, the original ABI values of OST_CLK_PERCPU_TIMER and OST_CLK_GLOBAL_TIMER need to be exchanged to ensure that in any combinations, the clock can be registered (by calling clk_hw_register()) from index 0. Before this patch, OST_CLK_PERCPU_TIMER and OST_CLK_GLOBAL_TIMER are only used in two places, one is when using "assigned-clocks" to configure the clocks in the DTS file; the other is when registering the clocks in the sysost driver. When the values of these two ABIs are exchanged, the ABI value used by sysost driver when registering the clock, and the ABI value used by DTS when configuring the clock using "assigned-clocks" will also change accordingly. Therefore, there is no situation that causes the wrong clock to the configured. Therefore, exchanging ABI values will not cause errors in the existing codes when registering and configuring the clocks. Currently, in the mainline, only X1000 and X1830 are using sysost driver, and the upcoming X2000 will also use sysost driver. This patch has been tested on all three SoCs and all works fine. Tested-by: 周正 (Zhou Zheng) <[email protected]> Signed-off-by: 周琰杰 (Zhou Yanjie) <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-26dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindingsNeil Armstrong1-0/+2
This adds the MIPI DSI Host Pixel Clock bindings. Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-24dt-bindings: clock: Add entry for crypto engine RPMH clock resourceThara Gopinath1-0/+1
Add clock id forc CE clock resource which is required to bring up the crypto engine on sdm845. Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Thara Gopinath <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-11-23dt-bindings: clk: axg-clkc: add MIPI DSI Host clock bindingNeil Armstrong1-0/+1
Add the clock ID for the MIPI DSI Host clock. Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-23dt-bindings: clk: axg-clkc: add Video ClocksNeil Armstrong1-0/+24
Add clock IDs for the video clocks. Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-19clk: ti: dra7: Drop idlest polling from IVA clkctrl clocksTony Lindgren1-0/+4
Similar to what we've done for IPU and DSP let's ignore the status bit for the IVA clkctrl register. The clkctrl status won't change unless the related rstctrl is deasserted, and the rstctrl status won't change unless the clkctrl is enabled. Cc: [email protected] Cc: Michael Turquette <[email protected]> Cc: Stephen Boyd <[email protected]> Cc: Suman Anna <[email protected]> Cc: Tero Kristo <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-04dt-bindings: clock: Add support for LPASS Always ON ControllerSrinivas Kandagatla1-0/+11
Always ON Clock controller is a block inside LPASS which controls 1 Glitch free muxes to LPASS codec Macros. Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2020-11-04dt-bindings: clock: Add support for LPASS Audio Clock ControllerSrinivas Kandagatla1-0/+13
Audio Clock controller is a block inside LPASS which controls 2 Glitch free muxes to LPASS codec Macros. Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2020-11-04dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings.Taniya Das1-0/+121
The Camera Subsystem clock provider have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Add clock ids for camera clocks which are required to bring the camera subsystem out of reset. Signed-off-by: Taniya Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2020-10-26dt-bindings: clock: imx-lpcg: add support to parse clocks from device treeDong Aisheng1-0/+14
MX8QM and MX8QXP LPCG Clocks are mostly the same except they may reside in different subsystems across CPUs and also vary a bit on the availability. Same as SCU clock, we want to move the clock definition into device tree which can fully decouple the dependency of Clock ID definition from device tree and make us be able to write a fully generic lpcg clock driver. And we can also use the existence of clock nodes in device tree to address the device and clock availability differences across different SoCs. Cc: Sascha Hauer <[email protected]> Cc: Michael Turquette <[email protected]> Cc: [email protected] Cc: Shawn Guo <[email protected]> Cc: Rob Herring <[email protected]> Cc: Stephen Boyd <[email protected]> Signed-off-by: Dong Aisheng <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-24Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+14
Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
2020-10-20Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', ↵Stephen Boyd7-2/+165
'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next - Support qcom SM8150/SM8250 video and display clks - Change how qcom's display port clks work * clk-ingenic: clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks * clk-at91: clk: at91: sam9x60: support only two programmable clocks clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name * clk-kconfig: clk: Restrict CLK_HSDK to ARC_SOC_HSDK * clk-imx: clk: imx8mq: Fix usdhc parents order clk: imx: imx21: Remove clock driver clk: imx: gate2: Fix a few typos clk: imx: Fix and update kerneldoc clk: imx: fix i.MX7D peripheral clk mux flags clk: imx: fix composite peripheral flags clk: imx: Correct the memrepair clock on imx8mp clk: imx: Correct the root clk of media ldb on imx8mp clk: imx: vf610: Add CRC clock clk: imx: Explicitly include bits.h clk: imx8qxp: Support building i.MX8QXP clock driver as module clk: imx8m: Support module build clk: imx: Add clock configuration for ARMv7 platforms clk: imx: Support building i.MX common clock driver as module clk: composite: Export clk_hw_register_composite() clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits * clk-qcom: clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: qcom: Add display clock controller driver for SM8150 and SM8250 dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings clk: qcom: add video clock controller driver for SM8250 clk: qcom: add video clock controller driver for SM8150 dt-bindings: clock: add SM8250 QCOM video clock bindings dt-bindings: clock: add SM8150 QCOM video clock bindings dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs clk/qcom: fix spelling typo clk: qcom: gcc-sdm660: Fix wrong parent_map clk: qcom: dispcc: Update DP clk ops for phy design clk: qcom: gcc-msm8939: remove defined but not used variables clk: qcom: ipq8074: make pcie0_rchng_clk_src static * clk-prima2: clk: clk-prima2: fix return value check in prima2_clk_init() * clk-bcm: clk: bcm2835: add missing release if devm_clk_hw_register fails clk: bcm: rpi: Add register to control pixel bvb clk
2020-10-20Merge branches 'clk-simplify', 'clk-ti', 'clk-tegra', 'clk-rockchip' and ↵Stephen Boyd2-0/+132
'clk-mediatek' into clk-next - Small non-critical fixes for TI clk driver - Support Mediatek MT8167 clks * clk-simplify: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_init clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_init * clk-ti: clk: ti: dra7: add missing clkctrl register for SHA2 instance clk: ti: clockdomain: fix static checker warning clk: ti: autoidle: add checks against NULL pointer reference clk: keystone: sci-clk: add 10% slack to set_rate clk: keystone: sci-clk: cache results of last query rate operation clk: keystone: sci-clk: fix parsing assigned-clock data during probe * clk-tegra: clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate() * clk-rockchip: clk: rockchip: Initialize hw to error to avoid undefined behavior clk: rockchip: rk3399: Support module build clk: rockchip: fix the clk config to support module build clk: rockchip: Export some clock common APIs for module drivers clk: rockchip: Export rockchip_register_softrst() clk: rockchip: Export rockchip_clk_register_ddrclk() clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls clk: rockchip: rk3308: drop unused mux_timer_src_p * clk-mediatek: clk: mediatek: Add MT8167 clock support dt-bindings: clock: mediatek: add bindings for MT8167 clocks clk: mediatek: add UART0 clock support
2020-10-20Merge branches 'clk-renesas', 'clk-amlogic', 'clk-allwinner', 'clk-samsung', ↵Stephen Boyd4-1/+148
'clk-doc' and 'clk-unused' into clk-next - Remove various unused variables in clk drivers * clk-renesas: clk: renesas: rcar-gen3: Update description for RZ/G2 clk: renesas: cpg-mssr: Add support for R-Car V3U clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0 dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions dt-bindings: power: Add r8a779a0 SYSC power domain definitions clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r) clk: renesas: r8a7742: Add clk entry for VSPR * clk-amlogic: clk: meson: make shipped controller configurable clk: meson: g12a: mark fclk_div2 as critical clk: meson: axg-audio: fix g12a tdmout sclk inverter clk: meson: axg-audio: separate axg and g12a regmap tables clk: meson: add sclk-ws driver * clk-allwinner: clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL clk: sunxi-ng: add support for the Allwinner A100 CCU dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU * clk-samsung: clk: s2mps11: initialize driver via module_platform_driver clk: samsung: Use cached clk_hws instead of __clk_lookup() calls clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions clk: samsung: Add clk ID definitions for the CPU parent clocks clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d clk: samsung: Keep top BPLL mux on Exynos542x enabled * clk-doc: clk: davinci: add missing kerneldoc clk: fixed: add missing kerneldoc * clk-unused: clk: socfpga: agilex: Remove unused variable 'cntr_mux' clk: si5341: drop unused 'err' variable clk: mmp: pxa1928: drop unused 'clk' variable clk: at91: drop unused at91sam9g45_pcr_layout
2020-10-13dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindingsJonathan Marek2-0/+67
Add device tree bindings for display clock controller for Qualcomm Technology Inc's SM8150 and SM8250 SoCs. Signed-off-by: Jonathan Marek <[email protected]> Tested-by: Dmitry Baryshkov <[email protected]> (SM8250) Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2020-10-13dt-bindings: clock: add SM8250 QCOM video clock bindingsJonathan Marek1-0/+34
Add device tree bindings for video clock controller for SM8250 SoCs. Signed-off-by: Jonathan Marek <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-10-13dt-bindings: clock: add SM8150 QCOM video clock bindingsJonathan Marek1-0/+25
Add device tree bindings for video clock controller for SM8150 SoCs. Signed-off-by: Jonathan Marek <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-10-13clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCsKonrad Dybcio1-0/+36
This change adds GDSCs, resets and most of the missing clocks to the msm8994 GCC driver. The remaining ones are of local_vote_clk and gate_clk type, which are not yet supported upstream. Also reorder them to match the original downstream driver. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-10-13dt-bindings: clock: mediatek: add bindings for MT8167 clocksFabien Parent1-0/+131
Add binding documentation for topckgen, apmixedsys, infracfg, audsys, imgsys, mfgcfg, vdecsys on MT8167 SoC. Signed-off-by: Fabien Parent <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-09-26Merge tag 'tegra-for-5.10-arm64-dt' of ↵Olof Johansson1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Changes for v5.10-rc1 This set of changes fixes some minor issues in existing device trees and adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled to allow them to be detected by software. It also adds support for the Tegra234 VDK board, which is a pre-silicon platform for the upcoming Orin SoC. * tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Initial Tegra234 VDK support arm64: tegra: Populate EEPROMs for Jetson Xavier NX arm64: tegra: Add label properties for EEPROMs arm64: tegra: Add DT binding for AHUB components arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano arm64: tegra: Properly size register regions for GPU on Tegra194 arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210 arm64: tegra: Describe display controller outputs for Tegra210 arm64: tegra: Disable SD card write-protection on Jetson Nano arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano arm64: tegra: Wire up pinctrl states for all DPAUX controllers arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-22clk: ti: dra7: add missing clkctrl register for SHA2 instanceTero Kristo1-0/+1
DRA7 SoC has two SHA instances. Add the clkctrl entry for the second one. Signed-off-by: Tero Kristo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-09-18arm64: tegra: Initial Tegra234 VDK supportThierry Reding1-0/+14
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It supports a subset of the peripherals that will be available in the final chip and serves as a bootstrapping platform. Reviewed-by: Jon Hunter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2020-09-17clk: samsung: Add clk ID definitions for the CPU parent clocksSylwester Nawrocki2-1/+8
Add clock ID definitions for the CPU parent clocks for SoCs which don't have such definitions yet. This will allow us to reference the parent clocks directly by cached struct clk_hw pointers in the clock provider, rather than doing clk lookup by name. Reviewed-by: Krzysztof Kozlowski <[email protected]> Acked-by: Chanwoo Choi <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sylwester Nawrocki <[email protected]>
2020-09-17clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3dSylwester Nawrocki1-0/+1
This patch adds ID for the mout_sw_aclk_g3d (SW_CLKMUX_ACLK_G3D) clock, mostly for internal use in the CMU driver. It will allow to avoid the __clk_lookup() call when setting up the clock during the clock provider initialization. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sylwester Nawrocki <[email protected]>
2020-09-10dt-bindings: clock: Add r8a779a0 CPG Core Clock DefinitionsYoshihiro Shimoda1-0/+55
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car V3U (R8A779A0) SoC. Signed-off-by: Yoshihiro Shimoda <[email protected]> Link: https://lore.kernel.org/r/1599657211-17504-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-08-31clk: imx: Correct the root clk of media ldb on imx8mpJacky Bai1-1/+1
The root clock slice at 0xbf00 is media_ldb clock, not csi_phy2_ref, so correct it. Signed-off-by: Jacky Bai <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-08-25clk: sunxi-ng: add support for the Allwinner A100 CCUYangtao Li2-0/+139
Add support for a100 in the sunxi-ng CCU framework. Signed-off-by: Yangtao Li <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/1eb41bf6c966a0e54820200650d27a5d4f2ac160.1595572867.git.frank@allwinnertech.com
2020-08-23clk: imx: vf610: Add CRC clockKrzysztof Kozlowski1-1/+2
Add the clock for CRC block allowing it to be enabled by consumers. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-08-12Merge tag 'clk-for-linus' of ↵Linus Torvalds9-72/+181
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "Here's some more updates that missed the last pull request because I happened to tag the tree at an earlier point in the history of clk-next. I must have fat fingered it and checked out an older version of clk-next on this second computer I'm using. This time it actually includes more code for Qualcomm SoCs, the AT91 major updates, and some Rockchip SoC clk driver updates as well. I've corrected this flow so this shouldn't happen again" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits) clk: bcm2835: Do not use prediv with bcm2711's PLLs clk: drop unused function __clk_get_flags clk: hsdk: Fix bad dependency on IOMEM dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 clk: mmp: avoid missing prototype warning clk: sparx5: Add Sparx5 SoC DPLL clock driver dt-bindings: clock: sparx5: Add bindings include file clk: qoriq: add LS1021A core pll mux options clk: clk-atlas6: fix return value check in atlas6_clk_init() clk: tegra: pll: Improve PLLM enable-state detection clk: X1000: Add support for calculat REFCLK of USB PHY. clk: JZ4780: Reformat the code to align it. clk: JZ4780: Add functions for enable and disable USB PHY. clk: Ingenic: Add RTC related clocks for Ingenic SoCs. dt-bindings: clock: Add tabs to align code. dt-bindings: clock: Add RTC related clocks for Ingenic SoCs. clk: davinci: Use fallthrough pseudo-keyword clk: imx: Use fallthrough pseudo-keyword clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk clk: qcom: gcc-sdm660: Add missing modem reset ...
2020-08-07Merge tag 'clk-for-linus' of ↵Linus Torvalds12-1/+220
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "It looks like a smaller batch of clk updates this time around. In the core framework we just have some minor tweaks and a debugfs feature, so not much to see there. The driver updates are fairly well split between AT91 and Qualcomm clk support. Adding those two drivers together equals about 50% of the diffstat. Otherwise, the big amount of work this time was on supporting Broadcom's Raspberry Pi firmware clks. Highlights: Core: - Document clk_hw_round_rate() so it gets some more use - Remove unused __clk_get_flags() - Add a prepare/enable debugfs feature similar to rate setting New Drivers: - Add support for SAMA7G5 SoC clks - Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Microchip Sparx5 DPLL clk - Add support for the new Renesas RZ/G2H (R8A774E1) SoC Updates: - Make defines for bcm63xx-gate clks to use in DT - Support BCM2711 SoC firmware clks - Add HDMI clks for BCM2711 SoCs - Add RTC related clks on Ingenic SoCs - Support USB PHY clks on Ingenic SoCs - Support gate clks on BCM6318 SoCs - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs - Use poll_timeout functions in Rockchip clk driver - Support Rockchip rk3288w SoC variant - Mark mac_lbtest critical on Rockchip rk3188 - Add CAAM clock support for i.MX vf610 driver - Add MU root clock support for i.MX imx8mp driver - Amlogic g12: add neural network accelerator clock sources - Amlogic meson8: remove critical flag for main PLL divider - Amlogic meson8: add video decoder clock gates - Convert one more Renesas DT binding to json-schema - Enhance critical clock handling on Renesas platforms to only consider clocks that were enabled at boot time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits) clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks clk: <linux/clk-provider.h>: drop a duplicated word clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: Drop duplicate selection in Kconfig clk: qcom: smd: Add support for MSM8992/4 rpm clocks clk: qcom: ipq8074: Add missing clocks for pcie dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe Replace HTTP links with HTTPS ones: Common CLK framework clk: qcom: Add CPU clock driver for msm8996 dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 soc: qcom: Separate kryo l2 accessors from PMU driver clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: qcom: Fix return value check in apss_ipq6018_probe() clk: bcm: dvp: Add missing module informations clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 ...
2020-08-04Merge tag 'timers-core-2020-08-04' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Time, timers and related driver updates: - Prevent unnecessary timer softirq invocations by extending the tracking of the next expiring timer in the timer wheel beyond the existing NOHZ functionality. The tracking overhead at enqueue time is within the noise, but on sensitive workloads the avoidance of the soft interrupt invocation is a measurable improvement. - The obligatory new clocksource driver for Ingenic X100 OST - The usual fixes, improvements, cleanups and extensions for newer chip variants all over the driver space" * tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) timers: Recalculate next timer interrupt only when necessary clocksource/drivers/ingenic: Add support for the Ingenic X1000 OST. dt-bindings: timer: Add Ingenic X1000 OST bindings. clocksource/drivers: Replace HTTP links with HTTPS ones clocksource/drivers/nomadik-mtu: Handle 32kHz clock clocksource/drivers/sh_cmt: Use "kHz" for kilohertz clocksource/drivers/imx: Add support for i.MX TPM driver with ARM64 clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT. timers: Lower base clock forwarding threshold timers: Remove must_forward_clk timers: Spare timer softirq until next expiry timers: Expand clk forward logic beyond nohz timers: Reuse next expiry cache after nohz exit timers: Always keep track of next expiry timers: Optimize _next_timer_interrupt() level iteration timers: Add comments about calc_index() ceiling work timers: Move trigger_dyntick_cpu() to enqueue_timer() timers: Use only bucket expiry for base->next_expiry value timers: Preserve higher bits of expiration on index calculation clocksource/drivers/timer-atmel-tcb: Add sama5d2 support ...
2020-08-03Merge tag 'arm-newsoc-5.9' of ↵Linus Torvalds1-0/+23
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are three SoC families newly dded to the 32-bit and 64-bit Arm architecture code in the kernel this time: - Daniel Palmer adds initial support for two chips made by MStar, a taiwanese SoC manufacturer that became part of Mediatek in 2012. For now, the added support is fairly minimal, with just two of its Cortex-A7 based 32-bit camera chips getting support for a limited set of on-chip peripherals. - Lars Povlsen from Microchip adds support for their new Sparx5 family of ethernet switch chips using 64-bit Cortex-A53 cores. These are descended from earlier VSC7xxx SparX and Ocelot chips using 32-bit MIPS cores. - Daniele Alessandrelli from Intel adds support for the new Keem Bay SoC for computer vision, built around a Movidius VPU with Linux running on Arm Cortex-A53 cores" * tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: mstar: Correct the compatible string for pmsleep dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep ARM: mstar: Add reboot support ARM: mstar: Add "pmsleep" node to base dtsi ARM: mstar: Add PMU ARM: mstar: Adjust IMI size for infinity3 ARM: mstar: Adjust IMI size for mercury5 ARM: mstar: Adjust IMI size of infinity ARM: mstar: Add IMI SRAM region dt-bindings: arm: mstar: Move existing MStar binding descriptions dt-bindings: arm: mstar: Add binding details for mstar, pmsleep ARM: mstar: Fix dts filename for 70mai midrive d08 ARM: mstar: Add dts for 70mai midrive d08 ARM: mstar: Add dts for msc313(e) based BreadBee boards ARM: mstar: Add mercury5 series dtsis ARM: mstar: Add infinity/infinity3 family dtsis ARM: mstar: Add Armv7 base dtsi ARM: mstar: Add binding details for mstar,l3bridge ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs ...
2020-08-03Merge branches 'clk-microchip', 'clk-mmp', 'clk-unused' and 'clk-at91' into ↵Stephen Boyd1-0/+23
clk-next - Add support for SAMA7G5 SoC clks - Microchip Sparx5 DPLL clk * clk-microchip: clk: sparx5: Add Sparx5 SoC DPLL clock driver dt-bindings: clock: sparx5: Add bindings include file * clk-mmp: clk: mmp: avoid missing prototype warning * clk-unused: clk: drop unused function __clk_get_flags * clk-at91: clk: at91: sama7g5: add clock support for sama7g5 clk: at91: clk-utmi: add utmi support for sama7g5 clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs clk: at91: add macro for pll ids mask clk: at91: clk-programmable: add mux_table option clk: at91: clk-peripheral: add support for changeable parent rate clk: at91: clk-master: add master clock support for SAMA7G5 clk: at91: clk-generated: add mux_table option clk: at91: clk-generated: pass the id of changeable parent at registration clk: at91: replace conditional operator with double logical not clk: at91: sckc: register slow_rc with accuracy option clk: at91: sam9x60: fix main rc oscillator frequency clk: at91: sam9x60-pll: use frac when setting frequency clk: at91: sam9x60-pll: check fcore against ranges clk: at91: sam9x60-pll: use logical or for range check clk: at91: clk-sam9x60-pll: fix mul mask clk: at91: clk-generated: check best_rate against ranges clk: at91: clk-generated: continue if __clk_determine_rate() returns error clk: at91: fix possible dead lock in new drivers
Powered by cgit, Gruvboxed by Blaster4385.