aboutsummaryrefslogtreecommitdiff
path: root/include/dt-bindings/clock
AgeCommit message (Collapse)AuthorFilesLines
2019-03-22clk: samsung: dt-bindings: Add ADC clock ID to Exynos5410Krzysztof Kozlowski1-0/+1
Add ID for TSADC clock to Exynos5410. Choose the same value of ID as in Exynos5420 to make it simpler/compatible in future (although clock driver code is not shared). Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Chanwoo Choi <[email protected]> Signed-off-by: Sylwester Nawrocki <[email protected]>
2019-03-22clk: samsung: dt-bindings: Put CLK_UART3 in orderKrzysztof Kozlowski1-1/+1
Order the CLK_UART3 by ID. No change in functionality. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Chanwoo Choi <[email protected]> Signed-off-by: Sylwester Nawrocki <[email protected]>
2019-03-20dt-bindings: clock: imx7ulp: remove SNVS clockAnson Huang1-1/+0
Since i.MX7ULP B0 chip, SNVS module is moved into M4 domain, so remove it from Linux clock table. Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2019-03-19dt-bindings: clk: g12a-clkc: add PCIE PLL clock IDNeil Armstrong1-0/+1
Add a clock ID for the reference clock feeding the USB3+PCIe Combo PHY. Signed-off-by: Neil Armstrong <[email protected]> Acked-by: Jerome Brunet <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-03-19clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock idNeil Armstrong1-0/+1
When submitted v2 of the G12A AO-CLK IDs, the SAR_ADC_SEL ID was moved to the internal non-exported bindings, but this clock is necessary and mandatory for the SAR ADC bindings. Export it back to the public bindings. Fixes: be3d960b0aeb ("dt-bindings: clk: add G12A AO Clock and Reset Bindings") Signed-off-by: Neil Armstrong <[email protected]> Acked-by: Jerome Brunet <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-03-19clk: meson-g12a: add cpu clock bindingsNeil Armstrong1-0/+1
Add Amlogic G12A Family CPU clocks bindings, only export CPU_CLK since it should be the only ID used. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Martin Blumenstingl <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Jerome Brunet <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-03-18include: dt-binding: clock: Rename zynqmp header fileJolly Shah1-8/+18
Rename file name of ZynqMP clk dt-bindings to align with file name of reset and power dt-bindings. Signed-off-by: Rajan Vaja <[email protected]> Signed-off-by: Jolly Shah <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2019-03-14Merge tag 'clk-for-linus' of ↵Linus Torvalds18-111/+644
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ...
2019-03-12dt-bindings: clock: imx8mq: Fix numbering overlaps and gapsAbel Vesa1-110/+110
IMX8MQ_CLK_USB_PHY_REF changes from 163 to 153, this way removing the gap. All the following clock ids are now decreased by 10 to keep the numbering right. Doing this, the IMX8MQ_CLK_CSI2_CORE is not overlapped with IMX8MQ_CLK_GPT1 anymore. IMX8MQ_CLK_GPT1_ROOT changes from 193 to 183 and all the following ids are updated accordingly. Reported-by: Patrick Wildt <[email protected]> Fixes: 1cf3817b ("dt-bindings: Add binding for i.MX8MQ CCM") Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-03-08Merge branches 'clk-typo', 'clk-json-schema', 'clk-mtk-2712-eco' and ↵Stephen Boyd1-1/+2
'clk-rockchip' into clk-next - Convert a few clk bindings to JSON schema format - 3rd ECO fix for Mediatek MT2712 SoCs * clk-typo: clk: samsung: fix typo * clk-json-schema: dt-bindings: clock: Convert fixed-factor-clock to json-schema dt-bindings: clock: Convert fixed-clock binding to json-schema * clk-mtk-2712-eco: clk: mediatek: update clock driver of MT2712 dt-bindings: clock: add clock for MT2712 * clk-rockchip: clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks clk: rockchip: fix frac settings of GPLL clock for rk3328
2019-03-08Merge branches 'clk-ingenic', 'clk-mtk-mux', 'clk-qcom-sdm845-pcie', ↵Stephen Boyd1-1/+2
'clk-mtk-crit' and 'clk-mtk' into clk-next * clk-ingenic: clk: ingenic: Remove set but not used variable 'enable' clk: ingenic: Fix doc of ingenic_cgu_div_info clk: ingenic: Fix round_rate misbehaving with non-integer dividers clk: ingenic: jz4740: Fix gating of UDC clock * clk-mtk-mux: clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 * clk-qcom-sdm845-pcie: clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks * clk-mtk-crit: clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro * clk-mtk: clk: mediatek: correct cpu clock name for MT8173 SoC
2019-03-08Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and ↵Stephen Boyd1-0/+10
'clk-SA-fixes' into clk-next - Updates for qcom MSM8998 GCC clks - qcom MSM8998 RPM managed clks - Random static analysis fixes for clk drivers * clk-qcom-msm8998: clk: qcom: Make common clk_hw registrations clk: qcom: smd: Add support for MSM8998 rpm clocks clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998 clk: qcom: Add missing freq for usb30_master_clk on 8998 clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks * clk-fractional-parent: clk: fractional-divider: check parent rate only if flag is set * clk-x86-mv: clk: x86: Move clk-lpss.h to platform_data/x86 * clk-SA-fixes: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings clk: qoriq: Improve an error message
2019-03-08Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', ↵Stephen Boyd3-3/+79
'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next - IPA clk support on Qualcomm RPMh clk controllers - Support sleeping gpios in clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Actions Semi S500 SoC clk support * clk-qcom-rpmh: clk: qcom: clk-rpmh: Add IPA clock support * clk-gpio-sleep: clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk * clk-stm32mp1: dt-bindings: clock: remove unused definition for stm32mp1 clk: stm32mp1: fix bit width of hse_rtc divider clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag clk: stm32mp1: fix HSI divider flag clk: stm32mp1: fix mcu divider table clk: stm32mp1: set ck_csi as critical clock clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks clk: stm32mp1: parent clocks update * clk-qcom-qcs404: clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs clk: qcom: remove empty lines in clk-rcg.h * clk-actions-s500: clk: actions: Add clock driver for S500 SoC dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU clk: actions: Add configurable PLL delay
2019-03-08Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and ↵Stephen Boyd5-3/+264
'clk-mmp2-lcdc' into clk-next - Split LCDC into two clks on the Marvell MMP2 SoC * clk-imx: clk: imx8mq: add GPIO clocks to clock tree clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: imx: imx8mm: Mark init function __init clk: imx8mq: Add the missing ARM clock dt-bindings: imx8mq-clock: Add the missing ARM clock clk: imx: imx8mq: Fix the rate propagation for arm pll clk: imx8mq: Add support for the CLKO1 clock clk: imx8mq: Fix the CLKO2 source select list clk: imx8mq: Add missing M4 clocks clk: imx: Add clock driver support for imx8mm dt-bindings: imx: Add clock binding doc for imx8mm clk: imx: Add PLLs driver for imx8mm soc clk: imx5: add imx5_SCC2_IPG_GATE clk: imx: scu: add set parent support clk: imx: scu: add fallback compatible string support clk: imx8mq: Make parent names arrays const pointers clk: imx: Make parents const pointer in mux wrappers clk: imx: Make parent_names const pointer in composite-8m * clk-samsung: clk: samsung: s3c2443: Mark expected switch fall-through clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure clk: samsung: exynos5433: Add selected IMEM clocks clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU clk: samsung: exynos5433: Fix name typo in sssx clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs * clk-ti: clk: clk-twl6040: Fix imprecise external abort for pdmclk ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that clk: ti: check clock type before doing autoidle ops clk: ti: add a usecount for autoidle clk: ti: generalize the init sequence of clk_hw_omap clocks clk: ti: remove usage of CLK_IS_BASIC clk: ti: add new API for checking if a provided clock is an OMAP clock clk: ti: move clk_hw_omap list handling under generic part of the driver * clk-uniphier-gear: clk: uniphier: Fix update register for CPU-gear * clk-mmp2-lcdc: clk: mmp2: separate LCDC peripheral clk form the display clock dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
2019-03-08Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', ↵Stephen Boyd7-1/+185
'clk-meson' and 'clk-renesas' into clk-next - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups * clk-optional: clk: Add (devm_)clk_get_optional() functions clk: Add comment about __of_clk_get_by_name() error values * clk-devm-clkdev-register: clk: clk-st: avoid clkdev lookup leak at remove clk: clk-max77686: Clean clkdev lookup leak and use devm clkdev: add managed clkdev lookup registration * clk-allwinner: clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it * clk-meson: (22 commits) clk: meson: meson8b: fix the naming of the APB clocks dt-bindings: clock: meson8b: add APB clock definition clk: meson: Add G12A AO Clock + Reset Controller dt-bindings: clk: add G12A AO Clock and Reset Bindings clk: meson: factorise meson64 peripheral clock controller drivers clk: meson: g12a: add peripheral clock controller dt-bindings: clk: meson: add g12a periph clock controller bindings clk: meson: pll: update driver for the g12a clk: meson: rework and clean drivers dependencies clk: meson: axg-audio does not require syscon clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory clk: export some clk_hw function symbols for module drivers clk: meson: ao-clkc: claim clock controller input clocks from DT clk: meson: axg: claim clock controller input clock from DT clk: meson: gxbb: claim clock controller input clock from DT clk: meson: meson8b: add the GPU clock tree clk: meson: meson8b: use a separate clock table for Meson8 clk: meson: axg-ao: add 32k generation subtree clk: meson: gxbb-ao: replace cec-32k with the dual divider clk: meson: add dual divider clock driver ... * clk-renesas: clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Add TMU clock clk: renesas: r8a77980: Add RPC clocks clk: renesas: rcar-gen3: Add RPC clocks clk: renesas: rcar-gen3: Add spinlock clk: renesas: rcar-gen3: Factor out cpg_reg_modify() clk: renesas: r8a774c0: Correct parent clock of DU clk: renesas: r8a774a1: Add missing CANFD clock clk: renesas: r8a774c0: Add missing CANFD clock
2019-03-06Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+2
Pull ARM SoC device tree updates from Arnd Bergmann: "This is a smaller update than the past few times, but with just over 500 non-merge changesets still dwarfes the rest of the SoC tree. Three new SoC platforms get added, each one a follow-up to an existing product, and added here in combination with a reference platform: - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics Applications": https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC: https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X These are actual commercial products we now support with an in-kernel device tree source file: - Bosch Guardian is a product made by Bosch Power Tools GmbH, based on the Texas Instruments AM335x chip - Winterland IceBoard is a Texas Instruments AM3874 based machine used in telescopes at the south pole and elsewhere, see commit d031773169df2 for some pointers: - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500 baseboard management controller. This is for running on the BMC. - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch used in airplanes. - Phicomm K3 is a WiFi router based on Broadcom bcm47094 - Methode Electronics uDPU FTTdp distribution point unit - X96 Max, a generic TV box based on Amlogic G12a (S905X2) - NVIDIA Shield TV (Darcy) based on Tegra210 And then there are several new SBC, evaluation, development or modular systems that we add: - Three new Rockchips rk3399 based boards: - FriendlyElec NanoPC-T4 and NanoPi M4 - Radxa ROCK Pi 4 - Five new i.MX6 family SoM modules and boards for industrial products: - Logic PD i.MX6QD SoM and evaluation baseboad - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357 microcontroller - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system in 96boards form factor - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual platform for corresponding to the latest "fast model" - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit and 64-bit mode. - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards enterprise form factor - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108 For already supported boards and SoCs, we often add support for new devices after merging the drivers. This time, the largest changes include updates for - STMicroelectronics stm32mp1, which was now formally launched last week - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip - Action Semi S700 - TI AM654x, their recently merged 64-bit SoC from the OMAP family - Various Amlogic Meson SoCs - Mediatek MT2712 - NVIDIA Tegra186 and Tegra210 - The ancient NXP lpc32xx family - Samsung s5pv210, used in some older mobile phones Many other chips see smaller updates and bugfixes beyond that" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits) ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4 dt-bindings: net: ti: deprecate cpsw-phy-sel bindings ARM: dts: am335x: switch to use phy-gmii-sel ARM: dts: am4372: switch to use phy-gmii-sel ARM: dts: dm814x: switch to use phy-gmii-sel ARM: dts: dra7: switch to use phy-gmii-sel arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference ARM: dts: exynos: Add support for secondary DAI to Odroid XU4 ARM: dts: exynos: Add support for secondary DAI to Odroid XU3 ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite ARM: dts: exynos: Add stdout path property to Arndale board ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU ARM: dts: exynos: Enable ADC on Odroid HC1 arm64: dts: sprd: Remove wildcard compatible string arm64: dts: sprd: Add SC27XX fuel gauge device arm64: dts: sprd: Add SC2731 charger device arm64: dts: sprd: Add ADC calibration support arm64: dts: sprd: Remove PMIC INTC irq trigger type arm64: dts: rockchip: Enable tsadc device on rock960 ARM: dts: rockchip: add chosen node on veyron devices ...
2019-03-05Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds1-1/+3
Pull MIPS updates from Paul Burton: - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB (GINVT) instructions, allowing for more efficient TLB maintenance when running on a CPU such as the I6500 that supports these. - Enable huge page support for MIPS64r6. - Optimize post-DMA cache sync by removing that code entirely for kernel configurations in which we know it won't be needed. - The number of pages allocated for interrupt stacks is now calculated correctly, where before we would wastefully allocate too much memory in some configurations. - The ath79 platform migrates to devicetree. - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board. - The ingenic/jz4740 platform gains support for appended devicetrees. - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see cleanups as do various pieces of core architecture code. * tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits) MIPS: lantiq: Remove separate GPHY Firmware loader MIPS: ingenic: Add support for appended devicetree MIPS: SGI-IP27: rework HUB interrupts MIPS: SGI-IP27: do boot CPU init later MIPS: SGI-IP27: do xtalk scanning later MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output MIPS: SGI-IP27: clean up bridge access and header files MIPS: SGI-IP27: get rid of volatile and hubreg_t MIPS: irq: Allocate accurate order pages for irq stack MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys() MIPS: eBPF: Remove REG_32BIT_ZERO_EX MIPS: eBPF: Always return sign extended 32b values MIPS: CM: Fix indentation MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support MIPS: OCTEON: program rx/tx-delay always from DT MIPS: OCTEON: delete board-specific link status MIPS: OCTEON: don't lie about interface type of CN3005 board MIPS: OCTEON: warn if deprecated link status is being used MIPS: OCTEON: add fixed-link nodes to in-kernel device tree MIPS: Delete unused flush_cache_sigtramp() ...
2019-02-28clk: imx8mq: add GPIO clocks to clock treeAnson Huang1-1/+7
i.MX8MQ has clock gate for each GPIO bank, add them into clock tree for GPIO driver to manage. Signed-off-by: Anson Huang <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-26clk: mediatek: correct cpu clock name for MT8173 SoCSeiya Wang1-1/+2
Correct cpu clock name from ca57 to ca72 since MT8173 does use cortex-a72. Signed-off-by: Seiya Wang <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-22dt-bindings: clock: Add DT bindings for Actions Semi S500 CMUEdgar Bernardi Righi1-0/+78
Add devicetree bindings for Actions Semi S500 Clock Management Unit. Signed-off-by: Edgar Bernardi Righi <[email protected]> [Mani: Documented S500 CMU compatible] Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Rob Herring <[email protected]> [[email protected]: Fix SPDX comment style in header file] Signed-off-by: Stephen Boyd <[email protected]>
2019-02-21dt-bindings: clock: remove unused definition for stm32mp1Gabriel Fernandez1-3/+0
A copy of LTDC_PX and ETHCK_K (LTDC_K and ETHMAC_K) was introduced in stm32mp1 dt-bindings file by mistake. These bindings are not used and shouldn't be use to be conform with convention name of the stm32mp1 clock IP. Signed-off-by: Gabriel Fernandez <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-21clk: qcom: clk-rpmh: Add IPA clock supportDavid Dai1-0/+1
The clk-rpmh driver only supports on and off RPMh clock resources. Let's extend the driver by adding support for clocks that are managed by a different type of RPMh resource known as Bus Clock Manager(BCM). The BCM is a configurable shared resource aggregator that scales performance based on a set of frequency points. The Qualcomm IP Accelerator (IPA) clock is an example of a resource that is managed by the BCM and this a requirement from the IPA driver in order to scale its core clock. Signed-off-by: David Dai <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-21dt-bindings: marvell,mmp2: Add clock id for the LCDC clockLubomir Rintel1-0/+1
The peripheral clock is required for access the the LCDC registers. It is in fact separate from the "AXI clock" that is optionally used to generate the pixel clock and as such requires a separate clock id. Link: https://lists.freedesktop.org/archives/dri-devel/2019-January/203975.html Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-21dt-bindings: imx8mq-clock: Add the missing ARM clockAbel Vesa1-1/+2
Add the missing ARM clock which will be used by cpufreq Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Lucas Stach <[email protected]> [[email protected]: Fixed numbering in dt header] Signed-off-by: Stephen Boyd <[email protected]>
2019-02-21clk: imx8mq: Add support for the CLKO1 clockFabio Estevam1-1/+3
Add the entry for the CLKO1 clock. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-21dt-bindings: imx: Add clock binding doc for imx8mmBai Ping1-0/+244
Add the clock binding doc for i.MX8MM. Signed-off-by: Bai Ping <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-21clk: imx5: add imx5_SCC2_IPG_GATEMichael Grzeschik1-1/+2
This adds the missing clock for the SCC2 peripheral unit. Signed-off-by: Michael Grzeschik <[email protected]> Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-13dt-bindings: clock: meson8b: add APB clock definitionMartin Blumenstingl1-0/+1
Commit 8e1dd17c8b0e3f ("dt-bindings: clock: meson8b: export the CPU post dividers") added a clock with the name "ABP". The actual name of this clock is "APB". Add a new #define with the same ID but the correct name. The old #define will be dropped in a follow-up patch because each commit in the tree must compile on it's own (the old #define is still used by the clock controller driver). Fixes: 8e1dd17c8b0e3f ("dt-bindings: clock: meson8b: export the CPU post dividers") Signed-off-by: Martin Blumenstingl <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Acked-by: Jerome Brunet <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-02-13dt-bindings: clk: add G12A AO Clock and Reset BindingsNeil Armstrong1-0/+34
Add bindings for the Amlogic G12A AO Clock and Reset controllers. Signed-off-by: Neil Armstrong <[email protected]> Acked-by: Jerome Brunet <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-02-08Merge tag 'armsoc-fixes-5.0' of ↵Linus Torvalds1-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a bit larger than normal, as we had not managed to send out a pull request before traveling for a week without my signing key. There are multiple code fixes for older bugs, all of which should get backported into stable kernels: - tango: one fix for multiplatform configurations broken on other platforms when tango is enabled - arm_scmi: device unregistration fix - iop32x: fix kernel oops from extraneous __init annotation - pxa: remove a double kfree - fsl qbman: close an interrupt clearing race The rest is the usual collection of smaller fixes for device tree files, on the renesas, allwinner, meson, omap, davinci, qualcomm and imx platforms. Some of these are for compile-time warnings, most are for board specific functionality that fails to work because of incorrect settings" * tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: tango: Improve ARCH_MULTIPLATFORM compatibility firmware: arm_scmi: provide the mandatory device release callback ARM: iop32x/n2100: fix PCI IRQ mapping arm64: dts: add msm8996 compatible to gicv3 ARM: dts: am335x-shc.dts: fix wrong cd pin level ARM: dts: n900: fix mmc1 card detect gpio polarity ARM: dts: omap3-gta04: Fix graph_port warning ARM: pxa: ssp: unneeded to free devm_ allocated data ARM: dts: r8a7743: Convert to new LVDS DT bindings soc: fsl: qbman: avoid race in clearing QMan interrupt arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 ARM: dts: da850: fix interrupt numbers for clocksource dt-bindings: imx8mq: Number clocks consecutively arm64: dts: meson: Fix mmc cd-gpios polarity ARM: dts: imx6sx: correct backward compatible of gpt ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3 ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ...
2019-02-05dt-bindings: clock: add clock for MT2712Weiyi Lu1-1/+2
Add new clock according to 3rd ECO design change. It's the parent clock of audio clock mux. Signed-off-by: Weiyi Lu <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-02-04dt-bindings: clk: meson: add g12a periph clock controller bindingsJian Hu1-0/+135
Add new clock controller compatible and dt-bindings header for the Everything-Else domain of the g12a SoC Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Jian Hu <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-02-01clk: samsung: exynos5433: Fix name typo in sssxKamil Konieczny1-1/+1
Fix typo in sssx name, there should be three letters 's'. Acked-by: Rob Herring <[email protected]> Reviewed-by: Chanwoo Choi <[email protected]> Signed-off-by: Kamil Konieczny <[email protected]> Signed-off-by: Sylwester Nawrocki <[email protected]>
2019-02-01clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDsKamil Konieczny1-0/+6
Add DT bindings to describe the IMEM CMU clocks for the SlimSSS (Slim Security SubSystem). Signed-off-by: Kamil Konieczny <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Chanwoo Choi <[email protected]> [[email protected]: edited commit description] Signed-off-by: Sylwester Nawrocki <[email protected]>
2019-01-24Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"Lubomir Rintel1-1/+0
It seems that the kernel has no business managing this clock: once the SP clock is disabled, it's not sufficient to just enable it in order to bring the SP core back up. Pretty sure nothing ever used this and it's safe to remove. This reverts commit e8a2c779141415105825e65a4715f1130bba61b1. Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-01-22MIPS: ath79: export switch MDIO reference clockFelix Fietkau1-1/+2
On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz clock. If that feature is not used, it defaults to the main reference clock, like on all other SoC. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: John Crispin <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: James Hogan <[email protected]> Cc: Rob Herring <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected]
2019-01-22MIPS: ath79: add helpers for setting clocks and expose the ref clockFelix Fietkau1-1/+2
Preparation for transitioning the legacy clock setup code over to OF. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: John Crispin <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: James Hogan <[email protected]> Cc: Rob Herring <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected]
2019-01-21clk: renesas: r8a774a1: Add missing CANFD clockFabrizio Castro1-0/+1
This patch adds the missing CANFD clock to the r8a774a1 specific clock driver. Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2019-01-21clk: renesas: r8a774c0: Add missing CANFD clockFabrizio Castro1-0/+1
This patch adds the missing CANFD clock to the r8a774c0 specific clock driver. Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2019-01-17ARM: dts: r8a7778: Add HSCIF0/1 supportUlrich Hecht1-0/+2
Add HSCIF0/1 clocks and device nodes, based on Rev. 1.00 of the R-Car M1A datasheet. Signed-off-by: Ulrich Hecht <[email protected]> [geert: Squashed two patches] [geert: Correct HSCIF1 module clock index] [geert: Correct reg properties for non-LPAE] Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2019-01-16dt-bindings: imx8mq: Number clocks consecutivelyGuido Günther1-13/+13
This fixes a duplicate use of 232 and numbers the clocks without holes. Fixes: 1cf3817bf1f5 ("dt-bindings: Add binding for i.MX8MQ CCM") Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Lucas Stach <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2019-01-09clk: qcom: smd: Add support for MSM8998 rpm clocksJeffrey Hugo1-0/+10
Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998 for clients to vote on. Signed-off-by: Jeffrey Hugo <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2019-01-07dt-bindings: clk: meson: add ao slow clock path idsJerome Brunet2-1/+13
Add the CLKIDs for the slow clock generation path Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-01-02Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support
2018-12-28clk: imx8qxp: make the name of clock ID genericAisheng Dong2-289/+289
SCU clock can be used in a similar way by IMX8QXP and IMX8QM SoCs. Let's make the name of clock ID generic to allow other SoCs to reuse the common part. This patch only changes the clock id name and file name, so no functional change. Cc: Stephen Boyd <[email protected]> Cc: Rob Herring <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Michael Turquette <[email protected]> Cc: [email protected] Signed-off-by: Dong Aisheng <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2018-12-14Merge branch 'clk-imx7ulp' into clk-nextStephen Boyd1-1/+8
* clk-imx7ulp: clk: imx: imx7ulp: add arm hsrun mode clocks support dt-bindings: clock: imx7ulp: add HSRUN mode related clocks
2018-12-14dt-bindings: clock: imx7ulp: add HSRUN mode related clocksAnson Huang1-1/+8
There are HSRUN mode clock mux and divider in SCG1 module, and SMC1 can control i.MX7ULP CPU to run in RUN mode or HSRUN mode, the mode switch bits are actually a clock mux, add these clocks for clock driver and dtb to use. Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2018-12-14Merge branch 'clk-qcom-8998-resets' into clk-nextStephen Boyd1-0/+94
- Add resets and make Qualcomm MSM8998 GCC driver more functional * clk-qcom-8998-resets: clk: qcom: Drop unused 8998 clock clk: qcom: Leave mmss noc on for 8998 clk: qcom: Add missing msm8998 resets clk: qcom: gcc-msm8998: Add clkref clocks clk: qcom: gcc-msm8998: Disable halt check of UFS clocks clk: qcom: gcc-msm8998: Drop hmss_dvm and lpass_at clk: qcom: Enumerate remaining msm8998 resets clk: qcom: Add xo dummy clk on msm8998 clk: qcom: Fix MSM8998 resets
2018-12-14Merge branches 'clk-imx7ulp', 'clk-imx6-fixes', 'clk-imx-fixes', ↵Stephen Boyd4-1/+796
'clk-imx8qxp' and 'clk-imx8mq' into clk-next - NXP i.MX7ULP SoC clock support - Support for i.MX8QXP SoC clocks - Support for NXP i.MX8MQ clock controllers * clk-imx7ulp: clk: imx: add imx7ulp clk driver clk: imx: implement new clk_hw based APIs clk: imx: make mux parent strings const dt-bindings: clock: add imx7ulp clock binding doc clk: imx: add imx7ulp composite clk support clk: imx: add pfdv2 support clk: imx: add pllv4 support clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support clk: imx: add gatable clock divider support * clk-imx6-fixes: clk: imx6q: handle ENET PLL bypass clk: imx6q: optionally get CCM inputs via standard clock handles clk: imx6q: reset exclusive gates on init * clk-imx-fixes: clk: imx6q: add DCICx clocks gate clk: imx6sl: ensure MMDC CH0 handshake is bypassed clk: imx7d: remove UART1 clock setting * clk-imx8qxp: clk: imx: add imx8qxp lpcg driver clk: imx: add lpcg clock support clk: imx: add imx8qxp clk driver clk: imx: add scu clock common part clk: imx: add configuration option for mmio clks dt-bindings: clock: add imx8qxp lpcg clock binding dt-bindings: clock: imx8qxp: add SCU clock IDs firmware: imx: add pm svc headfile dt-bindings: fsl: scu: update power domain binding firmware: imx: remove resource id enums dt-bindings: imx: add scu resource id headfile * clk-imx8mq: clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant clk: imx: remove redundant initialization of ret to zero clk: imx: Add SCCG PLL type clk: imx: Add fractional PLL output clock clk: imx: Add clock driver for i.MX8MQ CCM clk: imx: Add imx composite clock dt-bindings: Add binding for i.MX8MQ CCM
2018-12-14Merge branches 'clk-renesas', 'clk-allwinner', 'clk-tegra', 'clk-meson' and ↵Stephen Boyd8-5/+102
'clk-rockchip' into clk-next * clk-renesas: clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a77995: Simplify PLL3 multiplier/divider clk: renesas: r8a77995: Add missing CPEX clock clk: renesas: r8a77995: Remove non-existent SSP clocks clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks clk: renesas: r8a77995: Correct parent clock of DU clk: renesas: r8a77990: Correct parent clock of DU clk: renesas: r8a77970: Add CPEX clock clk: renesas: r8a77965: Add CPEX clock clk: renesas: r8a7796: Add CPEX clock clk: renesas: r8a7795: Add CPEX clock clk: renesas: r8a774a1: Add CPEX clock dt-bindings: clock: r8a7796: Remove CSIREF clock dt-bindings: clock: r8a7795: Remove CSIREF clock clk: renesas: Mark rza2_cpg_clk_register static clk: renesas: r7s9210: Add USB clocks clk: renesas: r8a77970: Add RPC clocks clk: renesas: r7s9210: Add SDHI clocks * clk-allwinner: clk: sunxi-ng: a64: Allow parent change for VE clock clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLL clk: sunxi-ng: h3: Allow parent change for ve clock clk: sunxi-ng: add support for suniv F1C100s SoC dt-bindings: clock: Add Allwinner suniv F1C100s CCU clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLL clk: sunxi-ng: a64: Fix gate bit of DSI DPHY clk: sunxi-ng: Enable DE2_CCU for SUN8I and SUN50I clk: sunxi-ng: Add support for H6 DE3 clocks dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description clk: sunxi-ng: h6: Set video PLLs limits clk: sunxi-ng: Use u64 for calculation of NM rate clk: sunxi-ng: Adjust MP clock parent rate when allowed clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock * clk-tegra: clk: tegra: Return the exact clock rate from clk_round_rate clk: tegra30: Use Tegra CPU powergate helper function soc/tegra: pmc: Drop SMP dependency from CPU APIs clk: tegra: Fix maximum audio sync clock for Tegra124/210 clk: tegra: get rid of duplicate defines clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC clk: tegra20: Turn EMC clock gate into divider * clk-meson: (25 commits) clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: Mark some things static clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width clk: meson: meson8b: add the CPU clock post divider clocks clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3 clk: meson: clk-regmap: add read-only gate ops clk: meson: meson8b: allow changing the CPU clock tree clk: meson: meson8b: run from the XTAL when changing the CPU frequency clk: meson: meson8b: add support for more M/N values in sys_pll clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel clk: meson: clk-pll: check if the clock is already enabled clk: meson: meson8b: fix the width of the cpu_scale_div clock clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table clk: meson: meson8b: use the HHI syscon if available dt-bindings: clock: meson8b: use the registers from the HHI syscon ... * clk-rockchip: clk: rockchip: add clock-id to gate of ACODEC for rk3328 clk: rockchip: add clock ID of ACODEC for rk3328 clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328 clk: rockchip: fix I2S1 clock gate register for rk3328 clk: rockchip: make rk3188 hclk_vio_bus critical clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering clk: rockchip: fix rk3188 sclk_smc gate data clk: rockchip: fix typo in rk3188 spdif_frac parent
Powered by cgit, Gruvboxed by Blaster4385.