| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
Signed-off-by: Philippe CORNU <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This patch adds helper functions for YCBCR 420 handling.
These functions do:
- check if a given video mode is YCBCR 420 only mode.
- check if a given video mode is YCBCR 420 also mode.
V2: Added YCBCR functions as helpers in DRM layer, instead of
keeping it in I915 layer.
V3: Added handling for YCBCR-420 only modes too.
V4: EXPORT_SYMBOL(drm_find_hdmi_output_type)
V5: Addressed review comments from Danvet:
- %s/drm_find_hdmi_output_type/drm_display_info_hdmi_output_type
- %s/drm_can_support_ycbcr_output/drm_display_supports_ycbcr_output
- %s/drm_can_support_this_ycbcr_output/
drm_display_supports_this_ycbcr_output
- pass drm_display_info instead of drm_connector for consistency
- For drm_get_highest_quality_ycbcr_supported doc, move the variable
description above, and then the function description.
V6: Add only YCBCR420 helpers (Ville)
V7: Addressed review comments from Ville
- Remove cea_vic_valid() check.
- Fix indentation.
- Make input parameters to helpers, const.
Cc: Ville Syrjala <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Shashank Sharma <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
[vsyrjala: Fix sparse indentation warn]
Signed-off-by: Ville Syrjälä <[email protected]>
|
|
CEA-861-F spec adds ycbcr420 deep color support information
in hf-vsdb block. This patch extends the existing hf-vsdb parsing
function by adding parsing of ycbcr420 deep color support from the
EDID and adding it into display information stored.
V2: Rebase
V3: Rebase
V4: Moved definition of y420_dc_modes into this patch, where its used
(Ville)
V5: Optimize function, if(conditions) not reqd (Ville)
V6: Rebase
V7: Rebase
Cc: Ville Syrjälä <[email protected]>
Cc: Jose Abreu <[email protected]>
Signed-off-by: Shashank Sharma <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
[vsyrjala: Fix sparse indentation warn]
Signed-off-by: Ville Syrjälä <[email protected]>
|
|
HDMI 2.0 spec adds support for YCBCR420 sub-sampled output.
CEA-861-F adds two new blocks in EDID's CEA extension blocks,
to provide information about sink's YCBCR420 output capabilities.
These blocks are:
- YCBCR420vdb(YCBCR 420 video data block):
This block contains VICs of video modes, which can be sopported only
in YCBCR420 output mode (Not in RGB/YCBCR444/422. Its like a normal
SVD block, valid for YCBCR420 modes only.
- YCBCR420cmdb(YCBCR 420 capability map data block):
This block gives information about video modes which can support
YCBCR420 output mode also (along with RGB,YCBCR444/422 etc) This
block contains a bitmap index of normal svd videomodes, which can
support YCBCR420 output too.
So if bit 0 from first vcb byte is set, first video mode in the svd
list can support YCBCR420 output too. Bit 1 means second video mode
from svd list can support YCBCR420 output too, and so on.
This patch adds two bitmaps in display's hdmi_info structure, one each
for VCB and VDB modes. If the source is HDMI 2.0 capable, this patch
adds:
- VDB modes (YCBCR 420 only modes) in connector's mode list, also makes
an entry in the vdb_bitmap per vic.
- VCB modes (YCBCR 420 also modes) only entry in the vcb_bitmap.
Cc: Ville Syrjala <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: Emil Velikov <[email protected]>
V2: Addressed
Review comments from Emil:
- Use 1ULL<<i instead of 1<<i to make sure the output is 64bit.
- Use the suggested method for updating dbmap.
- Add documentation for YCBCR420_vcb_map to fix kbuild warning.
Review comments from Ville:
- Do not expose the YCBCR420 flags in uabi layer, keep it internal.
- Save a map of YCBCR420 modes for future reference.
- Check db length before trying to parse extended tag.
- Add a warning if there are > 64 modes in capability map block.
- Use y420cmdb in function names and macros while dealing with vcb
to be aligned with spec.
- Move the display information parsing block ahead of mode parsing
blocks.
V3: Addressed design/review comments from Ville
- Do not add flags in video modes, else we have to expose them to user
- There should not be a UABI change, and kernel should detect the
choice of the output based on type of mode, and the bitmaps.
- Use standard bitops from kernel bitmap header, instead of calculating
bit positions manually.
V4: Addressed review comments from Ville:
- s/ycbcr_420_vdb/y420vdb
- s/ycbcr_420_vcb/y420cmdb
- Be less verbose on description of do_y420vdb_modes
- Move newmode variable in the loop scope.
- Use svd_to_vic() to get a VIC, instead of 0x7f
- Remove bitmap description for CMDB modes & VDB modes
- Dont add connector->ycbcr_420_allowed check for cmdb modes
- Remove 'len' variable, in is_y420cmdb function, which is used
only once
- Add length check in is_y420vdb function
- Remove unnecessary if (!db) check in function parse_y420cmdb_bitmap
- Do not add print about YCBCR 420 modes
- Fix indentation in few places
- Move ycbcr420_dc_modes in next patch, where its used
- Add a separate patch for movement of drm_add_display_info()
V5: Addressed review comments from Ville:
- Add the patch which cleans up the current EXTENDED_TAG usage
- Make y420_cmdb_map u64
- Do not block ycbcr420 modes while parsing the EDID, rather
add a separate helper function to prune ycbcr420-only modes from
connector's probed modes.
V6: Rebase
V7: Move this patch after the 420_only validation patch (Ville)
V8: Addressed review comments from Ville
- use cea_vic_valid check before adding cmdb/vdb modes
- add check for i < 64 while adding cmdb modes
- use 1ULL while checking bitmap
Signed-off-by: Shashank Sharma <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
[vsyrjala: Fix checkpatch complaints and indentation]
Signed-off-by: Ville Syrjälä <[email protected]>
|
|
YCBCR420 modes are supported only on HDMI 2.0 capable sources.
This patch adds:
- A drm helper to validate YCBCR420-only mode on a particular
connector. This function will help pruning the YCBCR420-only
modes from the connector's modelist.
- A bool variable (ycbcr_420_allowed) in the drm connector structure.
While handling the EDID from HDMI 2.0 sinks, its important to know
if the source is capable of handling YCBCR420 output, so that no
YCBCR 420 modes will be listed for sources which can't handle it.
A driver should set this variable if it wants to see YCBCR420 modes
in the modedb.
V5: Introduced the patch in series.
V6: Squashed two patches (validate YCBCR420 and add YCBCR420
identifier)
V7: Addressed review comments from Vile:
- Move this patch before we add 420 modes from EDID.
- No need for drm_valid_cea_vic() check, function back to non-static.
- Update MODE_STATUS with NO_420 condition.
- Introduce y420_vdb_modes variable in this patch
Cc: Ville Syrjala <[email protected]>
Signed-off-by: Shashank Sharma <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
[vsyrjala: Drop the now bogus EXPORT_SYMBOL(drm_valid_cea_vic)]
Signed-off-by: Ville Syrjälä <[email protected]>
|
|
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).
This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.
This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.
In case of I915 driver, this patch:
- checks if the connected display is HDMI 2.0.
- HDMI infoframes carry one of this two type of information:
- VIC for 4K modes for HDMI 1.4 sinks
- S3D information for S3D modes
As CEA-861-F has already defined VICs for 4K videomodes, this
patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks,
until the mode is 3D.
Cc: Ville Syrjala <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Daniel Vetter <[email protected]>
PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c
V2: Rebase, Added r-b from Andrzej
V3: Addressed review comment from Ville:
- Do not send VICs in both AVI-IF and HDMI-IF
send only one of it.
V4: Rebase
V5: Added r-b from Neil.
Addressed review comments from Ville
- Do not block HDMI vendor IF, instead check for VIC while
handling AVI infoframes
V6: Rebase
V7: Rebase
Reviewed-by: Andrzej Hajda <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Shashank Sharma <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Ville Syrjälä <[email protected]>
|
|
Drm has no monochrome or greyscale support so add a conversion
from the common format XR24.
Also reorder includes into the common order.
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The function has little to do with atomic, it's just where it has so
far been needed. So, rename it to drm_property_replace_blob, move it
to drm_property.c and export it.
Change the semantics to return whether the blob was replaced instead
of using an extra argument for that.
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://people.freedesktop.org/~airlied/linux
Pull more drm updates from Dave Airlie:
"i915, amd and some core fixes + mediatek color support.
Some fixes tree came in since the main pull request for rc1, primarily
i915 and drm-misc and one amd fix. The drm core vblank regression fix
is probably the most important thing.
I've also added the mediatek feature pull, it wasn't that big and
didn't look like it would have any impact outside of mediatek, in fact
it looks to just be a single feature, and some cleanups"
* tag 'drm-fixes-for-v4.13-rc1' of git://people.freedesktop.org/~airlied/linux: (31 commits)
drm/i915: Make DP-MST connector info work
drm/i915/gvt: Use fence error from GVT request for workload status
drm/i915/gvt: remove scheduler_mutex in per-engine workload_thread
drm/i915/gvt: Revert "drm/i915/gvt: Fix possible recursive locking issue"
drm/i915/gvt: Audit the command buffer address
drm/i915/gvt: Fix a memory leak in intel_gvt_init_gtt()
drm/rockchip: fix NULL check on devm_kzalloc() return value
drm/i915/fbdev: Check for existence of ifbdev->vma before operations
drm/radeon: Fix eDP for single-display iMac10,1 (v2)
drm/i915: Hold RPM wakelock while initializing OA buffer
drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
drm/i915/cfl: Fix Workarounds.
drm/i915: Avoid undefined behaviour of "u32 >> 32"
drm/i915: reintroduce VLV/CHV PFI programming power domain workaround
drm/i915: Fix an error checking test
drm/i915: Disable MSI for all pre-gen5
drm/atomic: Add missing drm_atomic_state_clear to atomic_remove_fb
drm: vblank: Fix vblank timestamp update
drm/i915/gvt: Make function dpy_reg_mmio_readx safe
drm/mediatek: separate color module to fixup error memory reallocation
...
|
|
Make the atomic private object stuff less special by introducing proper
base classes for the object and its state. Drivers can embed these in
their own appropriate objects, after which these things will work
exactly like the plane/crtc/connector states during atomic operations.
v2: Reorder to not depend on drm_dynarray (Daniel)
Cc: Dhinakaran Pandiyan <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]> #v1
Signed-off-by: Ville Syrjälä <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-next
Core Changes:
- Fix empty timestamps on hw without vlbank counter (Laurent)
- Clear atomic state before retrying ww/mutex acquisition in remove_fb (Maarten)
Driver Changes:
- rockchip: Fix incorrect NULL pointer check after allocation (Gustavo)
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Laurent Pinchart <[email protected]>
* tag 'drm-misc-next-fixes-2017-07-10' of git://anongit.freedesktop.org/git/drm-misc:
drm/rockchip: fix NULL check on devm_kzalloc() return value
drm/atomic: Add missing drm_atomic_state_clear to atomic_remove_fb
drm: vblank: Fix vblank timestamp update
DRM: Fix an incorrectly formatted table
bridge: Fix panel-bridge error return on !panel.
drm/rockchip: gem: add the lacks lock and trivial changes
|
|
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm, I think I've got one later
driver pull for mediatek SoC driver, I'm undecided on if it needs to
go to you yet.
Otherwise summary below:
Core drm:
- Atomic add driver private objects
- Deprecate preclose hook in modern drivers
- MST bandwidth tracking
- Use kvmalloc in more places
- Add mode_valid hook for crtc/encoder/bridge
- Reduce sync_file construction time
- Documentation updates
- New DRM synchronisation object support
New drivers:
- pl111 - pl111 CLCD display controller
Panel:
- Innolux P079ZCA panel driver
- Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support
i915:
- SKL+ watermark fixes
- G4x/G33 reset improvements
- DP AUX backlight improvements
- Buffer based GuC/host communication
- New getparam for (sub)slice infomation
- Cannonlake and Coffeelake initial patches
- Execbuf optimisations
radeon/amdgpu:
- Lots of Vega10 bug fixes
- Preliminary raven support
- KIQ support for compute rings
- MEC queue management rework
- DCE6 Audio support
- SR-IOV improvements
- Better radeon/amdgpu selection support
nouveau:
- HDMI stereoscopic support
- Display code rework for >= GM20x GPUs
msm:
- GEM rework for fine-grained locking
- Per-process pagetable work
- HDMI fixes for Snapdragon 820.
vc4:
- Remove 256MB CMA limit from vc4
- Add out-fence support
- Add support for cygnus
- Get/set tiling ioctls support
- Add T-format tiling support for scanout
zte:
- add VGA support.
etnaviv:
- Thermal throttle support for newer GPUs
- Restore userspace buffer cache performance
- dma-buf sync fix
stm:
- add stm32f429 display support
exynos:
- Rework vblank handling
- Fixup sw-trigger code
sun4i:
- V3s display engine support
- HDMI support for older SoCs
- Preliminary work on dual-pipeline SoCs.
rcar-du:
- VSP work
imx-drm:
- Remove counter load enable from PRE
- Double read/write reduction flag support
tegra:
- Documentation for the host1x and drm driver.
- Lots of staging ioctl fixes due to grate project work.
omapdrm:
- dma-buf fence support
- TILER rotation fixes"
* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
amdgpu: Set cik/si_support to 1 by default if radeon isn't built
drm/amdgpu/gfx9: fix driver reload with KIQ
drm/amdgpu/gfx8: fix driver reload with KIQ
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
drm/amd/amdgpu: move get memory type function from early init to sw init
drm/amdgpu/cgs: always set reference clock in mode_info
drm/amdgpu: fix vblank_time when displays are off
drm/amd/powerplay: power value format change for Vega10
drm/amdgpu/gfx9: support the amdgpu.disable_cu option
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
drm/amdgpu/cs: fix a typo in a comment
drm/amdgpu: Fix the exported always on CU bitmap
drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
drm/amd/powerplay/cz: print message if smc message fails
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull DRM compat ioctl handling updates from Al Viro:
"This kills the double-copies in there and tons of field-by-field
copyin/copyout.
Several dead ioctls put to rest, while we are at it - the native
counterparts had been gone for a decade, so we can bloody well fail
early on the compat side. No point rearranging the 32bit structure
into 64bit one (and back) only to be told "piss off, I don't know that
ioctl" by the native code..."
* 'work.drm' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (29 commits)
Fix trivial misannotations
mga: switch compat ioctls to drm_ioctl_kernel()
radeon: take out dead compat ioctls
drm compat: ia64 is not biarch
drm_compat_ioctl(): tidy up a bit
switch compat_drm_mapbufs() to drm_ioctl_kernel()
switch compat_drm_rmmap() to drm_ioctl_kernel()
switch compat_drm_mode_addfb2() to drm_ioctl_kernel()
switch compat_drm_wait_vblank() to drm_ioctl_kernel()
switch compat_drm_update_draw()
compat_drm: switch sg ioctls
compat_drm: switch AGP compat ioctls to drm_ioctl_kernel()
switch compat_drm_dma() to drm_ioctl_kernel()
switch compat_drm_resctx() to drm_ioctl_kernel()
switch compat_drm_getsareactx() to drm_ioctl_kernel()
switch compat_drm_setsareactx() to drm_ioctl_kernel()
switch compat_drm_freebufs() to drm_ioctl_kernel()
switch compat_drm_markbufs() to drm_ioctl_kernel()
switch compat_drm_addmap() to drm_ioctl_kernel()
switch compat_drm_getstats() to drm_ioctl_kernel()
...
|
|
Introduce a new top-level lock for the FB helper code. This will allow
better locking granularity and avoid the need to abuse modeset locking
for this purpose instead.
This patch just adds the new lock everywhere we currently grab
mode_config->mutex (explicitly, or through drm_modeset_lock_all).
Follow-up patches will push the kms locking down into only the places
that need it.
v2:
- use lockdep_assert_held
- use drm_fb_helper_for_each_connector where possible
- use the new top-level lock consistently, i.e. in all the places
we're currently acquiring mode_config.mutex.
- small polish to the kerneldoc
Tested-by: John Stultz <[email protected]>
Signed-off-by: Thierry Reding <[email protected]> (v1)
Reviewed-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
the drm_file parameter is unused, so remove it.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Dave Airlie <[email protected]>
Reviewed-by: Jason Ekstrand <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
The last user of these (i915.ko) no longer does. We can slim down the
core GEM object by removing the unused 8 bytes.
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In some cases, like cursor updates, it is interesting to update the
plane in an asynchronous fashion to avoid big delays. The current queued
update could be still waiting for a fence to signal and thus block any
subsequent update until its scan out. In cases like this if we update the
cursor synchronously through the atomic API it will cause significant
delays that would even be noticed by the final user.
This patch creates a fast path to jump ahead the current queued state and
do single planes updates without going through all atomic steps in
drm_atomic_helper_commit(). We take this path for legacy cursor updates.
For now only single plane updates are supported, but we plan to support
multiple planes updates and async PageFlips through this interface as well
in the near future.
v6: - move check code to drm_atomic_helper.c (Daniel Vetter)
v5:
- improve comments (Eric Anholt)
v4:
- fix state->crtc NULL check (Archit Taneja)
v3:
- fix iteration on the wrong crtc state
- put back code to forbid updates if there is a queued update for
the same plane (Ville Syrjälä)
- move size checks back to drivers (Ville Syrjälä)
- move ASYNC_UPDATE flag addition to its own patch (Ville Syrjälä)
v2:
- allow updates even if there is a queued update for the same
plane.
- fixes on the documentation (Emil Velikov)
- unconditionally call ->atomic_async_update (Emil Velikov)
- check for ->atomic_async_update earlier (Daniel Vetter)
- make ->atomic_async_check() the last step (Daniel Vetter)
- add ASYNC_UPDATE flag (Eric Anholt)
- update state in core after ->atomic_async_update (Eric Anholt)
- update docs (Eric Anholt)
Cc: Daniel Vetter <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Eric Anholt <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Reviewed-by: Archit Taneja <[email protected]> (v5)
Acked-by: Eric Anholt <[email protected]> (v5)
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.
While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Maxime Ripard <[email protected]> # for sun4i
Acked-by: Philipp Zabel <[email protected]> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <[email protected]> # for arcpgu
Acked-by: Boris Brezillon <[email protected]> # for atmel-hlcdc
Acked-by: Liviu Dudau <[email protected]> # for hdlcd and mali-dp
Acked-by: Stefan Agner <[email protected]> # for fsl-dcu
Tested-by: Philippe Cornu <[email protected]> # for stm
Acked-by: Philippe Cornu <[email protected]> # for stm
Acked-by: Vincent Abriou <[email protected]> # for sti
Reviewed-by: Thomas Hellstrom <[email protected]> # for vmwgfx
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There's no reason for drivers to call this, and all the ones I've
removed looked very fishy:
- Proper quiescenting of the vblank machinery should be done by
calling drm_crtc_vblank_off(), which is best done by shutting down
the entire display engine with drm_atomic_helper_shutdown.
- Releasing of allocated memory is done by the core already, it calls
drm_vblank_cleanup as a fallback.
- drm_vblank_cleanup also has checks for drivers which forget to clean
up vblank interrupts.
This essentially reverts
commit e77cef9c2d87db835ad9d70cde4a9b00b0ca2262
Author: Jerome Glisse <[email protected]>
Date: Thu Jan 7 15:39:13 2010 +0100
drm: Avoid calling vblank function is vblank wasn't initialized
which was done to fix a bug in radeon code with msi interrupts:
commit 003e69f9862bcda89a75c27750efdbc17ac02945
Author: Jerome Glisse <[email protected]>
Date: Thu Jan 7 15:39:14 2010 +0100
drm/radeon/kms: Don't try to enable IRQ if we have no handler installed
Afaict from digging around in old code, this was needed to avoid
blowing up in the ums fallback, and has stopped serving it's purpose
long ago - if irq init fails, the driver fails to load, and there's
really no way to blow up anymore.
Long story short, this was most likely a small ums compat/fallback
hack that became a thing of it's own and got cargo-cult duplicated all
over the drm codebase for essentially no gain at all.
v2: Mention that for drivers with a ->release callback cleanup is
handled by drm_dev_fini() (Thierry).
Cc: Thierry Reding <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Cc: Jerome Glisse <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Backmerge drm-next with rc7
|
|
Required for Daniel's drm_vblank_cleanup cleanup
|
|
The "supported input formats" table in dw_hdmi.h was incorrectly formatted,
using "+" signs where "|" needs to be. That, in turn, causes the PDF build
to fail.
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add an helper to wait for all page flips of an atomic state to be done.
v2:
- Pimp kerneldoc as discussed with Boris on irc
- Add missing doc for @dev.
- Use old_state for consitency with wait_for_vblanks
Signed-off-by: Boris Brezillon <[email protected]> (v1)
Acked-by: Boris Brezillon <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/1496392332-8722-2-git-send-email-boris.brezillon@free-electrons.com
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-next
Final pile of features for 4.13
New uabi:
- batch bo in first slot, for faster execbuf assembly in userspace
(Chris Wilson)
- (sub)slice getparam, needed for mesa perf support (Robert Bragg)
First pile of patches for cnl/cfl support, maintained by Rodrigo but
with lots of contributions from others. Still incomplete since public
review still ongoing.
Features/refactoring:
- Make execbuf faster (Chris Wilson), a pile of series to make execbuf
buffer handling have fewer passes, use less list walking, postpone
more work to async workers and shuffle buffers less, all to make the
common case much faster (in some cases at least).
- cold boot support for glk dsi (Madhav Chauhan)
- Clean up pipe A quirk and related old platform hacks (Ville)
- perf sampling support for kbl/glk (Lionel)
- perf cleanups (Robert Bragg)
- wire atomic state to backlight code, to avoid pipe lookup hacks
(Maarten)
- reduce request waiting latency/overhead to remove the spinning and
associated cpu cycle wasting (Chris)
- fix 90/270 rotation wm computation (Ville)
- new ddb allocation algo for skl (Kumar Mahesh)
- fix regression due to system suspend optimiazatino (Imre)
- the usual pile of small cleanups and refactors all over
GVT updates contained in this tag:
- optimization for per-VM mmio save/restore (Changbin)
- optimization for mmio hash table (Changbin)
- scheduler optimization with event (Ping)
- vGPU reset refinement (Fred)
- other misc refactor and cleanups, etc.
* tag 'drm-intel-next-2017-06-19' of git://anongit.freedesktop.org/git/drm-intel: (170 commits)
drm/i915: Update DRIVER_DATE to 20170619
drm/i915/cfl: Introduce Coffee Lake workarounds.
drm/i915: Store 9 bits of PCI Device ID for platforms with a LP PCH
drm/i915: Stash a pointer to the obj's resv in the vma
drm/i915: Async GPU relocation processing
drm/i915: Allow execbuffer to use the first object as the batch
drm/i915: Wait upon userptr get-user-pages within execbuffer
drm/i915: First try the previous execbuffer location
drm/i915: Store a persistent reference for an object in the execbuffer cache
drm/i915: Eliminate lots of iterations over the execobjects array
drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
drm/i915: Pass vma to relocate entry
drm/i915: Store a direct lookup from object handle to vma
drm/i915: Fix retrieval of hangcheck stats
drm/i915: Store i915_gem_object_is_coherent() as a bit next to cache-dirty
drm/i915: Mark CPU cache as dirty on every transition for CPU writes
drm/i915: Make i915_vma_destroy() static
drm/i915: Actually attach the tv_format property to the SDVO connector
Revert "drm/i915/skl: New ddb allocation algorithm"
drm/i915/glk: Add cold boot sequence for GLK DSI
...
|
|
drm_fbdev_cma_set_suspend{,_unlocked} use an integer parameter
to describe whether the intended state is a suspend or a resume.
It then passes the value to drm_fb_helper_set_suspend{,_unlocked}
which uses a boolean. Switch to using bool everywhere.
Signed-off-by: Liviu Dudau <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
I spotted a markup issue, plus adding the descriptions in drm_driver.
Plus a few more links while at it.
I'm still mildly unhappy with the split between fops and ioctls, but I
still think having the ioctls in the uapi chapter makes more sense. Oh
well ...
v2: Rebase.
v3: Move misplace hunk to the right patch.
Cc: Stefan Agner <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The magic switching between proper pci driver and shadow-attach isn't
useful anymore since there's no ums+kms drivers left. Let's split this
up properly, calling pci_register_driver for kms drivers and renaming
the shadow-attach init to drm_legacy_pci_init/exit.
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The only special-case is pci devices, and we can easily handle this in
the core. Do so and drop a pile of boilerplate from drivers.
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We use drm_crtc_ for all the new-style vblank functions which directly
take a struct drm_crtc *. drm_accurate_vblank_count was the odd one
out, correct this to appease my OCD.
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Unify and review everything, plus make sure it's all correct markup.
Drop the kernel-doc for internal functions. Also rework the overview
section, it's become rather outdated.
Unfortuantely the kernel-doc in drm_driver isn't rendered yet, but
that will change as soon as drm_driver is kernel-docified properly.
Also document properly that drm_vblank_cleanup is optional, the core
calls this already.
v2: Make it clear that cleanup happens in drm_dev_fini for drivers
with their own ->release callback (Thierry).
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Linux 4.12-rc5 for nouveau fixes
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-next
Cross-subsystem Changes:
- dt-bindings: add vendor prefix for NLT Technologies, Ltd. (Lucas)
- dt-bindings: Add support for samsung s6e3hf2 panel (Hoegeun)
Core Changes:
- Add drm_panel_bridge to avoid connector boilerplate in drivers (Eric)
- Trival fixes for dupe forward decl and reduce scope of variable (Dawid)
Driver Changes:
- dw-hdmi: Use mode_valid hook on bridge instead of connector (Jose)
- vc4,atmel-hlcdc: Use drm_panel_bridge where appropriate (Eric)
- panel: Add Innolux P079ZCA panel driver (Chris)
- panel-simple: Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels (Lucas)
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support (Hoegeun)
- zte,vc4,pl111,panel,mxsfb: Miscellaneous fixes
Cc: Jose Abreu <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Chris Zhong <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Hoegeun Kwon <[email protected]>
Cc: Dawid Kurek <[email protected]>
* tag 'drm-misc-next-2017-06-15' of git://anongit.freedesktop.org/git/drm-misc: (26 commits)
drm: Reduce scope of 'state' variable
drm: mxsfb_crtc: Reset the eLCDIF controller
drm: Remove duplicate forward declaration
drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board
dt-bindings: Add support for samsung s6e3hf2 panel
drm/panel: add backlight dependency for sitronix-st7789v
drm/panel: S6E3HA2 needs backlight code
drm/panel: simple: add support for AUO P320HVN03
drm/panel: simple: add support for NLT NL192108AC18-02D
dt-bindings: add vendor prefix for NLT Technologies, Ltd.
drm/panel: simple: add support for NEC NL12880B20-05
drm/panel: add Innolux P079ZCA panel driver
dt-bindings: Add INNOLUX P079ZCA panel bindings
drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path
drm/vc4/vc4_bo.c: always set bo->resv
drm: Add const to name field declaration in struct drm_prop_enum_list
drm/pl111: Fix offset calculation for the primary plane.
drm/atmel-hlcdc: Fix panel registration
drm/bridge: Build the panel wrapper in drm_kms_helper
drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge.
...
|
|
Forward declarations in C are great but I'm pretty sure one is enough.
Signed-off-by: Dawid Kurek <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Sync objects are new toplevel drm object, that contain a
pointer to a fence. This fence can be updated via command
submission ioctls via drivers.
There is also a generic wait obj API modelled on the vulkan
wait API (with code modelled on some amdgpu code).
These objects can be converted to an opaque fd that can be
passes between processes.
v2: rename reference/unreference to put/get (Chris)
fix leaked reference (David Zhou)
drop mutex in favour of cmpxchg (Chris)
v3: cleanups from danvet, rebase on drm_fops rename
check fd_flags is 0 in ioctls.
v4: export find/free, change replace fence to take a
syncobj. In order to support lookup first, replace
later semantics which seem in the end to be cleaner.
Reviewed-by: Sean Paul <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
Add PCI Ids for U Skus of Coffeelake.
v2: Use intel_coffeelake_gt3_info, in accordance to-
Rodrigo's patch:
v3: rebased
v3: Remove unused INTEL_CFL_IDS(Rodrigo).
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Anusha Srivatsa <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add PCI Ids for H Sku by following the BSpec.
v2: Remove unused INTEL_CFL_IDS.(Rodrigo).
v3: Add missing IDs(Rodrigo)
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Anusha Srivatsa <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add PCI Ids for S Sku following the BSpec.
v2: Remove the unused INTEL_CFL_IDS.(Rodrigo)
v3: Add missing IDs(Rodrigo)
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Anusha Srivatsa <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There is no reason why the name field should not be const, but
several why it should. The struct should only be used by
drm_property_create_enum() and there the name-field from the struct
is passed to drm_property_add_enum(), which takes a const char * as
a parameter.
Signed-off-by: Jyri Sarha <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/5dd3b6a1e20452bd8abdcbc55d1e8d7f56262266.1496161066.git.jsarha@ti.com
|
|
By the Spec all CNL Y skus are 2+2, i.e. GT2.
v2: Really include the PCI IDs to the picidlist[];
Reviewed-by: Anusha Srivatsa <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Platform enabling and its power-on are organized in different
skus (U x Y x S x H, etc). So instead of organizing it in
GT1 x GT2 x GT3 let's also use the platform sku.
This is also the new Spec style what makes the review much
more easy and straightforward.
v2: Really include the PCI IDs to the picidlist[];
v3: Remove PCI IDs not present in spec.
v4: Rebase.
Signed-off-by: Anusha Srivatsa <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Clinton Taylor <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-next
Core Changes:
- Stop proliferation of drm_vblank_cleanup by adding to the docs and deleting
boilerplate (Daniel)
- Roll out and use mode_valid hooks across crtc/encoder/bridge (Jose)
- Add drm_vblank.[hc] to isolate vblank code from optional irq helpers (Daniel)
Driver Changes:
- Replace drm_for_each_connector with drm_for_each_connector_iter (Gustavo)
- A couple misc driver fixes
Cc: Gustavo Padovan <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: Daniel Vetter <[email protected]>
* tag 'drm-misc-next-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc: (34 commits)
drm/vc4: Mark the device as active when enabling runtime PM.
drm: remove writeq/readq function definitions
drm/atmel-hlcdc: Use crtc->mode_valid() callback
drm/exynos: Drop drm_vblank_cleanup
drm/hdlcd|mali: Drop drm_vblank_cleanup
drm/doc: Polish irq helper documentation
drm: Extract drm_vblank.[hc]
drm/vc4: Fix comment in vc4_drv.h
drm/pl111: fix warnings without CONFIG_ARM_AMBA
drm/atomic: Consitfy mode parameter to drm_atomic_set_mode_for_crtc()
drm/arcgpu: Drop drm_vblank_cleanup
drm/atmel: Drop drm_vblank_cleanup
drm/imx: Drop drm_vblank_cleanup
drm/meson: Drop drm_vblank_cleanup
drm/stm: Drop drm_vblank_cleanup
drm/sun4i: Drop drm_vblank_cleanup
drm: better document how to send out the crtc disable event
drm: Use vsnprintf extension %ph
drm/doc: move printf helpers out of drmP.h
drm/pl111: select DRM_PANEL
...
|
|
Many DRM drivers have common code to make a stub connector
implementation that wraps a drm_panel. By wrapping the panel in a DRM
bridge, all of the connector code (including calls during encoder
enable/disable) goes away.
v2: Fix build with CONFIG_DRM=m, drop "dev" argument that should just
be the panel's dev, move kerneldoc up a level and document
_remove().
v3: Fix another breakage with CONFIG_DRM=m, fix breakage with
CONFIG_OF=n, move protos under CONFIG_DRM_PANEL_BRIDGE, wrap a
line.
Signed-off-by: Eric Anholt <[email protected]>
Acked-by: Daniel Vetter <[email protected]> (v1)
Reviewed-by: Boris Brezillon <[email protected]> (v2)
Acked-by: Archit Taneja <[email protected]> (v2)
Signed-off-by: Archit Taneja <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now that we have a callback to check if bridge supports a given mode
we can use it in Synopsys Designware HDMI bridge so that we restrict
the number of probbed modes to the ones we can actually display.
Also, there is no need to use mode_fixup() callback as mode_valid()
will handle the mode validation.
NOTE: I also had to change the pdata declaration of mode_valid
custom callback so that the passed modes are const. I also changed
in the platforms I found. Not even compiled it though.
Signed-off-by: Jose Abreu <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Acked-by: Philipp Zabel <[email protected]>
Cc: Carlos Palminha <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Mark Yao <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/3d8d449e4d13d2535fa292c75f5fa931de4a4fa8.1495720737.git.joabreu@synopsys.com
|
|
Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which
already have them.
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull a (much shorter) overview into drm_irq.c, and instead put the
callback documentation into in-line comments in drm_drv.h.
v2: Move the include stanzas back to the split-up patch (Stefan).
Cc: Stefan Agner <[email protected]>
Reviewed-by: Stefan Agner <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm_irq.c contains both the irq helper library (optional) and the
vblank support (optional, but part of the modeset uapi, and doesn't
require the use of the irq helpers at all.
Split this up for more clarity of the scope of the individual bits.
v2: Move misplaced hunks to this patch (Stefan).
Cc: Stefan Agner <[email protected]>
Reviewed-by: Stefan Agner <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm_atomic_set_mode_for_crtc() doesn't modify the passed mode, so let's
make it const.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Daniel Vetter <[email protected]>
|
|
The kernel doc explained what needs to happen, but not how to most
easily accomplish that using the functions. Fix that.
Cc: Boris Brezillon <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
And document them lightly. Unfortunately kernel-doc isn't the most
awesome for documenting #defines that don't look like functions, it
makes functions out of them :-/
Signed-off-by: Daniel Vetter <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Introduce a new helper function which calls mode_valid() callback
for all bridges in an encoder chain.
Signed-off-by: Jose Abreu <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: Carlos Palminha <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Reviewed-by: Archit Taneja <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/36bd5e054496ad3c9c71f1ffe204f28533f55f1e.1495720737.git.joabreu@synopsys.com
|