| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- Fix a deadlock in fiemap.
There was a big lock around the whole operation that can interfere
with a page fault and mkwrite.
Reducing the lock scope can also speed up fiemap
- Fix range condition for extent defragmentation which could lead to
worse layout in some cases
* tag 'for-6.8-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix deadlock with fiemap and extent locking
btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size
|
|
While working on the patchset to remove extent locking I got a lockdep
splat with fiemap and pagefaulting with my new extent lock replacement
lock.
This deadlock exists with our normal code, we just don't have lockdep
annotations with the extent locking so we've never noticed it.
Since we're copying the fiemap extent to user space on every iteration
we have the chance of pagefaulting. Because we hold the extent lock for
the entire range we could mkwrite into a range in the file that we have
mmap'ed. This would deadlock with the following stack trace
[<0>] lock_extent+0x28d/0x2f0
[<0>] btrfs_page_mkwrite+0x273/0x8a0
[<0>] do_page_mkwrite+0x50/0xb0
[<0>] do_fault+0xc1/0x7b0
[<0>] __handle_mm_fault+0x2fa/0x460
[<0>] handle_mm_fault+0xa4/0x330
[<0>] do_user_addr_fault+0x1f4/0x800
[<0>] exc_page_fault+0x7c/0x1e0
[<0>] asm_exc_page_fault+0x26/0x30
[<0>] rep_movs_alternative+0x33/0x70
[<0>] _copy_to_user+0x49/0x70
[<0>] fiemap_fill_next_extent+0xc8/0x120
[<0>] emit_fiemap_extent+0x4d/0xa0
[<0>] extent_fiemap+0x7f8/0xad0
[<0>] btrfs_fiemap+0x49/0x80
[<0>] __x64_sys_ioctl+0x3e1/0xb50
[<0>] do_syscall_64+0x94/0x1a0
[<0>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
I wrote an fstest to reproduce this deadlock without my replacement lock
and verified that the deadlock exists with our existing locking.
To fix this simply don't take the extent lock for the entire duration of
the fiemap. This is safe in general because we keep track of where we
are when we're searching the tree, so if an ordered extent updates in
the middle of our fiemap call we'll still emit the correct extents
because we know what offset we were on before.
The only place we maintain the lock is searching delalloc. Since the
delalloc stuff can change during writeback we want to lock the extent
range so we have a consistent view of delalloc at the time we're
checking to see if we need to set the delalloc flag.
With this patch applied we no longer deadlock with my testcase.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
With the following file extent layout, defrag would do unnecessary IO
and result more on-disk space usage.
# mkfs.btrfs -f $dev
# mount $dev $mnt
# xfs_io -f -c "pwrite 0 40m" $mnt/foobar
# sync
# xfs_io -f -c "pwrite 40m 16k" $mnt/foobar
# sync
Above command would lead to the following file extent layout:
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 298844160 nr 41943040
extent data offset 0 nr 41943040 ram 41943040
extent compression 0 (none)
item 7 key (257 EXTENT_DATA 41943040) itemoff 15763 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13631488 nr 16384
extent data offset 0 nr 16384 ram 16384
extent compression 0 (none)
Which is mostly fine. We can allow the final 16K to be merged with the
previous 40M, but it's upon the end users' preference.
But if we defrag the file using the default parameters, it would result
worse file layout:
# btrfs filesystem defrag $mnt/foobar
# sync
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 298844160 nr 41943040
extent data offset 0 nr 8650752 ram 41943040
extent compression 0 (none)
item 7 key (257 EXTENT_DATA 8650752) itemoff 15763 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 340787200 nr 33292288
extent data offset 0 nr 33292288 ram 33292288
extent compression 0 (none)
item 8 key (257 EXTENT_DATA 41943040) itemoff 15710 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13631488 nr 16384
extent data offset 0 nr 16384 ram 16384
extent compression 0 (none)
Note the original 40M extent is still there, but a new 32M extent is
created for no benefit at all.
[CAUSE]
There is an existing check to make sure we won't defrag a large enough
extent (the threshold is by default 32M).
But the check is using the length to the end of the extent:
range_len = em->len - (cur - em->start);
/* Skip too large extent */
if (range_len >= extent_thresh)
goto next;
This means, for the first 8MiB of the extent, the range_len is always
smaller than the default threshold, and would not be defragged.
But after the first 8MiB, the remaining part would fit the requirement,
and be defragged.
Such different behavior inside the same extent caused the above problem,
and we should avoid different defrag decision inside the same extent.
[FIX]
Instead of using @range_len, just use @em->len, so that we have a
consistent decision among the same file extent.
Now with this fix, we won't touch the extent, thus not making it any
worse.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 0cb5950f3f3b ("btrfs: fix deadlock when reserving space during defrag")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Mostly pretty trivial, the user visible ones are:
- don't barf when replicas_required > replicas
- fix check_version_upgrade() so it doesn't do something nonsensical
when we're downgrading"
* tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix missing va_end()
bcachefs: Fix check_version_upgrade()
bcachefs: Clamp replicas_required to replicas
bcachefs: fix missing endiannes conversion in sb_members
bcachefs: fix kmemleak in __bch2_read_super error handling path
bcachefs: Fix missing bch2_err_class() calls
|
|
Pull smb client fixes from Steve French:
"Five smb3 client fixes, most also for stable:
- Two multichannel fixes (one to fix potential handle leak on retry)
- Work around possible serious data corruption (due to change in
folios in 6.3, for cases when non standard maximum write size
negotiated)
- Symlink creation fix
- Multiuser automount fix"
* tag '6.8-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: Fix regression in writes when non-standard maximum write size negotiated
smb: client: handle path separator of created SMB symlinks
smb: client: set correct id, uid and cruid for multiuser automounts
cifs: update the same create_guid on replay
cifs: fix underflow in parse_server_interfaces()
|
|
Pull ceph fixes from Ilya Dryomov:
"Additional cap handling fixes from Xiubo to avoid "client isn't
responding to mclientcaps(revoke)" stalls on the MDS side"
* tag 'ceph-for-6.8-rc5' of https://github.com/ceph/ceph-client:
ceph: add ceph_cap_unlink_work to fire check_caps() immediately
ceph: always queue a writeback when revoking the Fb caps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- Fix direct write error handling to avoid a race between failed IO
completion and the submission path itself which can result in an
invalid file size exposed to the user after the failed IO.
* tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Improve error handling
|
|
The conversion to netfs in the 6.3 kernel caused a regression when
maximum write size is set by the server to an unexpected value which is
not a multiple of 4096 (similarly if the user overrides the maximum
write size by setting mount parm "wsize", but sets it to a value that
is not a multiple of 4096). When negotiated write size is not a
multiple of 4096 the netfs code can skip the end of the final
page when doing large sequential writes, causing data corruption.
This section of code is being rewritten/removed due to a large
netfs change, but until that point (ie for the 6.3 kernel until now)
we can not support non-standard maximum write sizes.
Add a warning if a user specifies a wsize on mount that is not
a multiple of 4096 (and round down), also add a change where we
round down the maximum write size if the server negotiates a value
that is not a multiple of 4096 (we also have to check to make sure that
we do not round it down to zero).
Reported-by: R. Diez" <rdiez-2006@rd10.de>
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Suggested-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Acked-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Tested-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org # v6.3+
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Write error handling is racy and can sometime lead to the error recovery
path wrongly changing the inode size of a sequential zone file to an
incorrect value which results in garbage data being readable at the end
of a file. There are 2 problems:
1) zonefs_file_dio_write() updates a zone file write pointer offset
after issuing a direct IO with iomap_dio_rw(). This update is done
only if the IO succeed for synchronous direct writes. However, for
asynchronous direct writes, the update is done without waiting for
the IO completion so that the next asynchronous IO can be
immediately issued. However, if an asynchronous IO completes with a
failure right before the i_truncate_mutex lock protecting the update,
the update may change the value of the inode write pointer offset
that was corrected by the error path (zonefs_io_error() function).
2) zonefs_io_error() is called when a read or write error occurs. This
function executes a report zone operation using the callback function
zonefs_io_error_cb(), which does all the error recovery handling
based on the current zone condition, write pointer position and
according to the mount options being used. However, depending on the
zoned device being used, a report zone callback may be executed in a
context that is different from the context of __zonefs_io_error(). As
a result, zonefs_io_error_cb() may be executed without the inode
truncate mutex lock held, which can lead to invalid error processing.
Fix both problems as follows:
- Problem 1: Perform the inode write pointer offset update before a
direct write is issued with iomap_dio_rw(). This is safe to do as
partial direct writes are not supported (IOMAP_DIO_PARTIAL is not
set) and any failed IO will trigger the execution of zonefs_io_error()
which will correct the inode write pointer offset to reflect the
current state of the one on the device.
- Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error()
and call this function directly from __zonefs_io_error() after
obtaining the zone information using blkdev_report_zones() with a
simple callback function that copies to a local stack variable the
struct blk_zone obtained from the device. This ensures that error
handling is performed holding the inode truncate mutex.
This change also simplifies error handling for conventional zone files
by bypassing the execution of report zones entirely. This is safe to
do because the condition of conventional zones cannot be read-only or
offline and conventional zone files are always fully mapped with a
constant file size.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/dev.c
9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()")
723de3ebef03 ("net: free altname using an RCU callback")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
drivers/net/ethernet/renesas/ravb_main.c
ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
net/mptcp/protocol.c
bdd70eb68913 ("mptcp: drop the push_pending field")
28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regular fixes and one fix for space reservation regression since
6.7 that users have been reporting:
- fix over-reservation of metadata chunks due to not keeping proper
balance between global block reserve and delayed refs reserve; in
practice this leaves behind empty metadata block groups, the
workaround is to reclaim them by using the '-musage=1' balance
filter
- other space reservation fixes:
- do not delete unused block group if it may be used soon
- do not reserve space for checksums for NOCOW files
- fix extent map assertion failure when writing out free space inode
- reject encoded write if inode has nodatasum flag set
- fix chunk map leak when loading block group zone info"
* tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't refill whole delayed refs block reserve when starting transaction
btrfs: zoned: fix chunk map leak when loading block group zone info
btrfs: reject encoded write if inode has nodatasum flag set
btrfs: don't reserve space for checksums when writing to nocow files
btrfs: add new unused block groups to the list of unused block groups
btrfs: do not delete unused block group if it may be used soon
btrfs: add and use helper to check if block group is used
btrfs: don't drop extent_map for free space inode on write error
|
|
Add an ioctl for getting and setting epoll_params. User programs can use
this ioctl to get and set the busy poll usec time, packet budget, and
prefer busy poll params for a specific epoll context.
Parameters are limited:
- busy_poll_usecs is limited to <= s32_max
- busy_poll_budget is limited to <= NAPI_POLL_WEIGHT by unprivileged
users (!capable(CAP_NET_ADMIN))
- prefer_busy_poll must be 0 or 1
- __pad must be 0
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using epoll-based busy poll, the prefer_busy_poll option is hardcoded
to false. Users may want to enable prefer_busy_poll to be used in
conjunction with gro_flush_timeout and defer_hard_irqs_count to keep device
IRQs masked.
Other busy poll methods allow enabling or disabling prefer busy poll via
SO_PREFER_BUSY_POLL, but epoll-based busy polling uses a hardcoded value.
Fix this edge case by adding support for a per-epoll context
prefer_busy_poll option. The default is false, as it was hardcoded before
this change.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using epoll-based busy poll, the packet budget is hardcoded to
BUSY_POLL_BUDGET (8). Users may desire larger busy poll budgets, which
can potentially increase throughput when busy polling under high network
load.
Other busy poll methods allow setting the busy poll budget via
SO_BUSY_POLL_BUDGET, but epoll-based busy polling uses a hardcoded
value.
Fix this edge case by adding support for a per-epoll context busy poll
packet budget. If not specified, the default value (BUSY_POLL_BUDGET) is
used.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow busy polling on a per-epoll context basis. The per-epoll context
usec timeout value is preferred, but the pre-existing system wide sysctl
value is still supported if it specified.
busy_poll_usecs is a u32, but in a follow up patch the ioctl provided to
the user only allows setting a value from 0 to S32_MAX.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: https://lore.kernel.org/linux-bcachefs/202402131603.E953E2CF@keescook/T/#u
Reported-by: coverity scan
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When also downgrading, check_version_upgrade() could pick a new version
greater than the latest supported version.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This prevents going emergency read only when the user has specified
replicas_required > replicas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since commit 28270e25c69a ("btrfs: always reserve space for delayed refs
when starting transaction") we started not only to reserve metadata space
for the delayed refs a caller of btrfs_start_transaction() might generate
but also to try to fully refill the delayed refs block reserve, because
there are several case where we generate delayed refs and haven't reserved
space for them, relying on the global block reserve. Relying too much on
the global block reserve is not always safe, and can result in hitting
-ENOSPC during transaction commits or worst, in rare cases, being unable
to mount a filesystem that needs to do orphan cleanup or anything that
requires modifying the filesystem during mount, and has no more
unallocated space and the metadata space is nearly full. This was
explained in detail in that commit's change log.
However the gap between the reserved amount and the size of the delayed
refs block reserve can be huge, so attempting to reserve space for such
a gap can result in allocating many metadata block groups that end up
not being used. After a recent patch, with the subject:
"btrfs: add new unused block groups to the list of unused block groups"
We started to add new block groups that are unused to the list of unused
block groups, to avoid having them around for a very long time in case
they are never used, because a block group is only added to the list of
unused block groups when we deallocate the last extent or when mounting
the filesystem and the block group has 0 bytes used. This is not a problem
introduced by the commit mentioned earlier, it always existed as our
metadata space reservations are, most of the time, pessimistic and end up
not using all the space they reserved, so we can occasionally end up with
one or two unused metadata block groups for a long period. However after
that commit mentioned earlier, we are just more pessimistic in the
metadata space reservations when starting a transaction and therefore the
issue is more likely to happen.
This however is not always enough because we might create unused metadata
block groups when reserving metadata space at a high rate if there's
always a gap in the delayed refs block reserve and the cleaner kthread
isn't triggered often enough or is busy with other work (running delayed
iputs, cleaning deleted roots, etc), not to mention the block group's
allocated space is only usable for a new block group after the transaction
used to remove it is committed.
A user reported that he's getting a lot of allocated metadata block groups
but the usage percentage of metadata space was very low compared to the
total allocated space, specially after running a series of block group
relocations.
So for now stop trying to refill the gap in the delayed refs block reserve
and reserve space only for the delayed refs we are expected to generate
when starting a transaction.
CC: stable@vger.kernel.org # 6.7+
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/9cdbf0ca9cdda1b4c84e15e548af7d7f9f926382.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H6802ayLHUJFztzZAVzBLJAGdFx=6FHNNy87+obZXXZpQ@mail.gmail.com/
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Reported-by: Heddxh <g311571057@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE93xANEby6RezOD=zcofENYZOT-wpYygJyauyUAZkLv6XVFOA@mail.gmail.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_load_block_group_zone_info() we never drop a reference on the
chunk map we have looked up, therefore leaking a reference on it. So
add the missing btrfs_free_chunk_map() at the end of the function.
Fixes: 7dc66abb5a47 ("btrfs: use a dedicated data structure for chunk maps")
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we allow an encoded write against inodes that have the NODATASUM
flag set, either because they are NOCOW files or they were created while
the filesystem was mounted with "-o nodatasum". This results in having
compressed extents without corresponding checksums, which is a filesystem
inconsistency reported by 'btrfs check'.
For example, running btrfs/281 with MOUNT_OPTIONS="-o nodatacow" triggers
this and 'btrfs check' errors out with:
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space tree
[4/7] checking fs roots
root 256 inode 257 errors 1040, bad file extent, some csum missing
root 256 inode 258 errors 1040, bad file extent, some csum missing
ERROR: errors found in fs roots
(...)
So reject encoded writes if the target inode has NODATASUM set.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently when doing a write to a file we always reserve metadata space
for inserting data checksums. However we don't need to do it if we have
a nodatacow file (-o nodatacow mount option or chattr +C) or if checksums
are disabled (-o nodatasum mount option), as in that case we are only
adding unnecessary pressure to metadata reservations.
For example on x86_64, with the default node size of 16K, a 4K buffered
write into a nodatacow file is reserving 655360 bytes of metadata space,
as it's accounting for checksums. After this change, which stops reserving
space for checksums if we have a nodatacow file or checksums are disabled,
we only need to reserve 393216 bytes of metadata.
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When unlinking a file the check caps could be delayed for more than
5 seconds, but in MDS side it maybe waiting for the clients to
release caps.
This will use the cap_wq work queue and a dedicated list to help
fire the check_caps() and dirty buffer flushing immediately.
Link: https://tracker.ceph.com/issues/50223
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In case there is 'Fw' dirty caps and 'CHECK_CAPS_FLUSH' is set we
will always ignore queue a writeback. Queue a writeback is very
important because it will block kclient flushing the snapcaps to
MDS and which will block MDS waiting for revoking the 'Fb' caps.
Link: https://tracker.ceph.com/issues/50223
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Convert path separator to CIFS_DIR_SEP(cifs_sb) from symlink target
before sending it over the wire otherwise the created SMB symlink may
become innaccesible from server side.
Fixes: 514d793e27a3 ("smb: client: allow creating symlinks via reparse points")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When uid, gid and cruid are not specified, we need to dynamically
set them into the filesystem context used for automounting otherwise
they'll end up reusing the values from the parent mount.
Fixes: 9fd29a5bae6e ("cifs: use fs_context for automounts")
Reported-by: Shane Nehring <snehring@iastate.edu>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2259257
Cc: stable@vger.kernel.org # 6.2+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix performance regression introduced by moving the security
permission hook out of do_clone_file_range() and into its caller
vfs_clone_file_range().
This causes the security hook to be called in situation were it
wasn't called before as the fast permission checks were left in
do_clone_file_range().
Fix this by merging the two implementations back together and
restoring the old ordering: fast permission checks first, expensive
ones later.
- Tweak mount_setattr() permission checking so that mount properties on
the real rootfs can be changed.
When we added mount_setattr() we added additional checks compared to
legacy mount(2). If the mount had a parent then verify that the
caller and the mount namespace the mount is attached to match and if
not make sure that it's an anonymous mount.
But the real rootfs falls into neither category. It is neither an
anoymous mount because it is obviously attached to the initial mount
namespace but it also obviously doesn't have a parent mount. So that
means legacy mount(2) allows changing mount properties on the real
rootfs but mount_setattr(2) blocks this. This causes regressions (See
the commit for details).
Fix this by relaxing the check. If the mount has a parent or if it
isn't a detached mount, verify that the mount namespaces of the
caller and the mount are the same. Technically, we could probably
write this even simpler and check that the mount namespaces match if
it isn't a detached mount. But the slightly longer check makes it
clearer what conditions one needs to think about.
* tag 'vfs-6.8-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: relax mount_setattr() permission checks
remap_range: merge do_clone_file_range() into vfs_clone_file_range()
|
|
File open requests made to the server contain a
CreateGuid, which is used by the server to identify
the open request. If the same request needs to be
replayed, it needs to be sent with the same CreateGuid
in the durable handle v2 context.
Without doing so, we could end up leaking handles on
the server when:
1. multichannel is used AND
2. connection goes down, but not for all channels
This is because the replayed open request would have a
new CreateGuid and the server will treat this as a new
request and open a new handle.
This change fixes this by reusing the existing create_guid
stored in the cached fid struct.
REF: MS-SMB2 4.9 Replay Create Request on an Alternate Channel
Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In this loop, we step through the buffer and after each item we check
if the size_left is greater than the minimum size we need. However,
the problem is that "bytes_left" is type ssize_t while sizeof() is type
size_t. That means that because of type promotion, the comparison is
done as an unsigned and if we have negative bytes left the loop
continues instead of ending.
Fixes: fe856be475f7 ("CIFS: parse and store info on iface queries")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
nilfs2: fix potential bug in end_buffer_async_write
mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
MAINTAINERS: Leo Yan has moved
mm/zswap: don't return LRU_SKIP if we have dropped lru lock
fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super
mailmap: switch email address for John Moon
mm: zswap: fix objcg use-after-free in entry destruction
mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range()
arch/arm/mm: fix major fault accounting when retrying under per-VMA lock
selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros
mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page
mm: memcg: optimize parent iteration in memcg_rstat_updated()
nilfs2: fix data corruption in dsync block recovery for small block sizes
mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get()
exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock)
fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats
fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand()
getrusage: use sig->stats_lock rather than lock_task_sighand()
getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()
...
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
During xfstest tests, there are some kmemleak reports e.g. generic/051 with
if USE_KMEMLEAK=yes:
====================================================================
EXPERIMENTAL kmemleak reported some memory leaks! Due to the way kmemleak
works, the leak might be from an earlier test, or something totally unrelated.
unreferenced object 0xffff9ef905aaf778 (size 8):
comm "mount.bcachefs", pid 169844, jiffies 4295281209 (age 87.040s)
hex dump (first 8 bytes):
a5 cc cc cc cc cc cc cc ........
backtrace:
[<ffffffff87fd9a43>] __kmem_cache_alloc_node+0x1f3/0x2c0
[<ffffffff87f49b66>] kmalloc_trace+0x26/0xb0
[<ffffffffc0a3fefe>] __bch2_read_super+0xfe/0x4e0 [bcachefs]
[<ffffffffc0a3ad22>] bch2_fs_open+0x262/0x1710 [bcachefs]
[<ffffffffc09c9e24>] bch2_mount+0x4c4/0x640 [bcachefs]
[<ffffffff88080c90>] legacy_get_tree+0x30/0x60
[<ffffffff8802c748>] vfs_get_tree+0x28/0xf0
[<ffffffff88061fe5>] path_mount+0x475/0xb60
[<ffffffff880627e5>] __x64_sys_mount+0x105/0x140
[<ffffffff88932642>] do_syscall_64+0x42/0xf0
[<ffffffff88a000e6>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
unreferenced object 0xffff9ef96cdc4fc0 (size 32):
comm "mount.bcachefs", pid 169844, jiffies 4295281209 (age 87.040s)
hex dump (first 32 bytes):
2f 64 65 76 2f 6d 61 70 70 65 72 2f 74 65 73 74 /dev/mapper/test
2d 31 00 cc cc cc cc cc cc cc cc cc cc cc cc cc -1..............
backtrace:
[<ffffffff87fd9a43>] __kmem_cache_alloc_node+0x1f3/0x2c0
[<ffffffff87f4a081>] __kmalloc_node_track_caller+0x51/0x150
[<ffffffff87f3adc2>] kstrdup+0x32/0x60
[<ffffffffc0a3ff1a>] __bch2_read_super+0x11a/0x4e0 [bcachefs]
[<ffffffffc0a3ad22>] bch2_fs_open+0x262/0x1710 [bcachefs]
[<ffffffffc09c9e24>] bch2_mount+0x4c4/0x640 [bcachefs]
[<ffffffff88080c90>] legacy_get_tree+0x30/0x60
[<ffffffff8802c748>] vfs_get_tree+0x28/0xf0
[<ffffffff88061fe5>] path_mount+0x475/0xb60
[<ffffffff880627e5>] __x64_sys_mount+0x105/0x140
[<ffffffff88932642>] do_syscall_64+0x42/0xf0
[<ffffffff88a000e6>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
====================================================================
The leak happens if bdev_open_by_path() failed to open a block device
then it goes label 'out' directly without call of bch2_free_super().
Fix it by going to label 'err' instead of 'out' if bdev_open_by_path()
fails.
Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We aren't supposed to be leaking our private error codes outside of
fs/bcachefs/.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull smb server fixes from Steve French:
"Two ksmbd server fixes:
- memory leak fix
- a minor kernel-doc fix"
* tag '6.8-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: free aux buffer if ksmbd_iov_pin_rsp_read fails
ksmbd: Add kernel-doc for ksmbd_extract_sharename() function
|
|
Pull smb client fixes from Steve French:
- reconnect fix
- multichannel channel selection fix
- minor mount warning fix
- reparse point fix
- null pointer check improvement
* tag '6.8-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: clarify mount warning
cifs: handle cases where multiple sessions share connection
cifs: change tcon status when need_reconnect is set on it
smb: client: set correct d_type for reparse points under DFS mounts
smb3: add missing null server pointer check
|
|
Pull ceph fixes from Ilya Dryomov:
"Some fscrypt-related fixups (sparse reads are used only for encrypted
files) and two cap handling fixes from Xiubo and Rishabh"
* tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client:
ceph: always check dir caps asynchronously
ceph: prevent use-after-free in encode_cap_msg()
ceph: always set initial i_blkbits to CEPH_FSCRYPT_BLOCK_SHIFT
libceph: just wait for more data to be available on the socket
libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*()
libceph: fail sparse-read if the data length doesn't match
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
"Fixed:
- size update for compressed file
- some logic errors, overflows
- memory leak
- some code was refactored
Added:
- implement super_operations::shutdown
Improved:
- alternative boot processing
- reduced stack usage"
* tag 'ntfs3_for_6.8' of https://github.com/Paragon-Software-Group/linux-ntfs3: (28 commits)
fs/ntfs3: Slightly simplify ntfs_inode_printk()
fs/ntfs3: Add ioctl operation for directories (FITRIM)
fs/ntfs3: Fix oob in ntfs_listxattr
fs/ntfs3: Fix an NULL dereference bug
fs/ntfs3: Update inode->i_size after success write into compressed file
fs/ntfs3: Fixed overflow check in mi_enum_attr()
fs/ntfs3: Correct function is_rst_area_valid
fs/ntfs3: Use i_size_read and i_size_write
fs/ntfs3: Prevent generic message "attempt to access beyond end of device"
fs/ntfs3: use non-movable memory for ntfs3 MFT buffer cache
fs/ntfs3: Use kvfree to free memory allocated by kvmalloc
fs/ntfs3: Disable ATTR_LIST_ENTRY size check
fs/ntfs3: Fix c/mtime typo
fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame()
fs/ntfs3: Add and fix comments
fs/ntfs3: ntfs3_forced_shutdown use int instead of bool
fs/ntfs3: Implement super_operations::shutdown
fs/ntfs3: Drop suid and sgid bits as a part of fpunch
fs/ntfs3: Add file_modified
fs/ntfs3: Correct use bh_read
...
|
|
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Based on our implementation of multichannel, it is entirely
possible that a server struct may not be found in any channel
of an SMB session.
In such cases, we should be prepared to move on and search for
the server struct in the next session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a tcon is marked for need_reconnect, the intention
is to have it reconnected.
This change adjusts tcon->status in cifs_tree_connect
when need_reconnect is set. Also, this change has a minor
correction in resetting need_reconnect on success. It makes
sure that it is done with tc_lock held.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Space reservations for metadata are, most of the time, pessimistic as we
reserve space for worst possible cases - where tree heights are at the
maximum possible height (8), we need to COW every extent buffer in a tree
path, need to split extent buffers, etc.
For data, we generally reserve the exact amount of space we are going to
allocate. The exception here is when using compression, in which case we
reserve space matching the uncompressed size, as the compression only
happens at writeback time and in the worst possible case we need that
amount of space in case the data is not compressible.
This means that when there's not available space in the corresponding
space_info object, we may need to allocate a new block group, and then
that block group might not be used after all. In this case the block
group is never added to the list of unused block groups and ends up
never being deleted - except if we unmount and mount again the fs, as
when reading block groups from disk we add unused ones to the list of
unused block groups (fs_info->unused_bgs). Otherwise a block group is
only added to the list of unused block groups when we deallocate the
last extent from it, so if no extent is ever allocated, the block group
is kept around forever.
This also means that if we have a bunch of tasks reserving space in
parallel we can end up allocating many block groups that end up never
being used or kept around for too long without being used, which has
the potential to result in ENOSPC failures in case for example we over
allocate too many metadata block groups and then end up in a state
without enough unallocated space to allocate a new data block group.
This is more likely to happen with metadata reservations as of kernel
6.7, namely since commit 28270e25c69a ("btrfs: always reserve space for
delayed refs when starting transaction"), because we started to always
reserve space for delayed references when starting a transaction handle
for a non-zero number of items, and also to try to reserve space to fill
the gap between the delayed block reserve's reserved space and its size.
So to avoid this, when finishing the creation a new block group, add the
block group to the list of unused block groups if it's still unused at
that time. This way the next time the cleaner kthread runs, it will delete
the block group if it's still unused and not needed to satisfy existing
space reservations.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/9cdbf0ca9cdda1b4c84e15e548af7d7f9f926382.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Before deleting a block group that is in the list of unused block groups
(fs_info->unused_bgs), we check if the block group became used before
deleting it, as extents from it may have been allocated after it was added
to the list.
However even if the block group was not yet used, there may be tasks that
have only reserved space and have not yet allocated extents, and they
might be relying on the availability of the unused block group in order
to allocate extents. The reservation works first by increasing the
"bytes_may_use" field of the corresponding space_info object (which may
first require flushing delayed items, allocating a new block group, etc),
and only later a task does the actual allocation of extents.
For metadata we usually don't end up using all reserved space, as we are
pessimistic and typically account for the worst cases (need to COW every
single node in a path of a tree at maximum possible height, etc). For
data we usually reserve the exact amount of space we're going to allocate
later, except when using compression where we always reserve space based
on the uncompressed size, as compression is only triggered when writeback
starts so we don't know in advance how much space we'll actually need, or
if the data is compressible.
So don't delete an unused block group if the total size of its space_info
object minus the block group's size is less then the sum of used space and
space that may be used (space_info->bytes_may_use), as that means we have
tasks that reserved space and may need to allocate extents from the block
group. In this case, besides skipping the deletion, re-add the block group
to the list of unused block groups so that it may be reconsidered later,
in case the tasks that reserved space end up not needing to allocate
extents from it.
Allowing the deletion of the block group while we have reserved space, can
result in tasks failing to allocate metadata extents (-ENOSPC) while under
a transaction handle, resulting in a transaction abort, or failure during
writeback for the case of data extents.
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a helper function to determine if a block group is being used and make
use of it at btrfs_delete_unused_bgs(). This helper will also be used in
future code changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While running the CI for an unrelated change I hit the following panic
with generic/648 on btrfs_holes_spacecache.
assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:1385!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1
RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0
Call Trace:
<TASK>
extent_write_cache_pages+0x2ac/0x8f0
extent_writepages+0x87/0x110
do_writepages+0xd5/0x1f0
filemap_fdatawrite_wbc+0x63/0x90
__filemap_fdatawrite_range+0x5c/0x80
btrfs_fdatawrite_range+0x1f/0x50
btrfs_write_out_cache+0x507/0x560
btrfs_write_dirty_block_groups+0x32a/0x420
commit_cowonly_roots+0x21b/0x290
btrfs_commit_transaction+0x813/0x1360
btrfs_sync_file+0x51a/0x640
__x64_sys_fdatasync+0x52/0x90
do_syscall_64+0x9c/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
This happens because we fail to write out the free space cache in one
instance, come back around and attempt to write it again. However on
the second pass through we go to call btrfs_get_extent() on the inode to
get the extent mapping. Because this is a new block group, and with the
free space inode we always search the commit root to avoid deadlocking
with the tree, we find nothing and return a EXTENT_MAP_HOLE for the
requested range.
This happens because the first time we try to write the space cache out
we hit an error, and on an error we drop the extent mapping. This is
normal for normal files, but the free space cache inode is special. We
always expect the extent map to be correct. Thus the second time
through we end up with a bogus extent map.
Since we're deprecating this feature, the most straightforward way to
fix this is to simply skip dropping the extent map range for this failed
range.
I shortened the test by using error injection to stress the area to make
it easier to reproduce. With this patch in place we no longer panic
with my error injection test.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Send query dir requests with an info level of
SMB_FIND_FILE_FULL_DIRECTORY_INFO rather than
SMB_FIND_FILE_DIRECTORY_INFO when the client is generating its own
inode numbers (e.g. noserverino) so that reparse tags still
can be parsed directly from the responses, but server won't
send UniqueId (server inode number)
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Address static checker warning in cifs_ses_get_chan_index():
warn: variable dereferenced before check 'server'
To be consistent, and reduce risk, we should add another check
for null server pointer.
Fixes: 88675b22d34e ("cifs: do not search for channel if server is terminating")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
According to a syzbot report, end_buffer_async_write(), which handles the
completion of block device writes, may detect abnormal condition of the
buffer async_write flag and cause a BUG_ON failure when using nilfs2.
Nilfs2 itself does not use end_buffer_async_write(). But, the async_write
flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue
with race condition of competition between segments for dirty blocks") as
a means of resolving double list insertion of dirty blocks in
nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the
resulting crash.
This modification is safe as long as it is used for file data and b-tree
node blocks where the page caches are independent. However, it was
irrelevant and redundant to also introduce async_write for segment summary
and super root blocks that share buffers with the backing device. This
led to the possibility that the BUG_ON check in end_buffer_async_write
would fail as described above, if independent writebacks of the backing
device occurred in parallel.
The use of async_write for segment summary buffers has already been
removed in a previous change.
Fix this issue by removing the manipulation of the async_write flag for
the remaining super root block buffer.
Link: https://lkml.kernel.org/r/20240203161645.4992-1-konishi.ryusuke@gmail.com
Fixes: 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+5c04210f7c7f897c1e7f@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000019a97c05fd42f8c8@google.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot reported a hang issue in migrate_pages_batch() called by mbind()
and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2.
While migrate_pages_batch() locks a folio and waits for the writeback to
complete, the log writer thread that should bring the writeback to
completion picks up the folio being written back in
nilfs_lookup_dirty_data_buffers() that it calls for subsequent log
creation and was trying to lock the folio. Thus causing a deadlock.
In the first place, it is unexpected that folios/pages in the middle of
writeback will be updated and become dirty. Nilfs2 adds a checksum to
verify the validity of the log being written and uses it for recovery at
mount, so data changes during writeback are suppressed. Since this is
broken, an unclean shutdown could potentially cause recovery to fail.
Investigation revealed that the root cause is that the wait for writeback
completion in nilfs_page_mkwrite() is conditional, and if the backing
device does not require stable writes, data may be modified without
waiting.
Fix these issues by making nilfs_page_mkwrite() wait for writeback to
finish regardless of the stable write requirement of the backing device.
Link: https://lkml.kernel.org/r/20240131145657.4209-1-konishi.ryusuke@gmail.com
Fixes: 1d1d1a767206 ("mm: only enforce stable page writes if the backing device requires it")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ee2ae68da3b22d04cd8d@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000047d819061004ad6c@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When configuring a hugetlb filesystem via the fsconfig() syscall, there is
a possible NULL dereference in hugetlbfs_fill_super() caused by assigning
NULL to ctx->hstate in hugetlbfs_parse_param() when the requested pagesize
is non valid.
E.g: Taking the following steps:
fd = fsopen("hugetlbfs", FSOPEN_CLOEXEC);
fsconfig(fd, FSCONFIG_SET_STRING, "pagesize", "1024", 0);
fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0);
Given that the requested "pagesize" is invalid, ctxt->hstate will be replaced
with NULL, losing its previous value, and we will print an error:
...
...
case Opt_pagesize:
ps = memparse(param->string, &rest);
ctx->hstate = h;
if (!ctx->hstate) {
pr_err("Unsupported page size %lu MB\n", ps / SZ_1M);
return -EINVAL;
}
return 0;
...
...
This is a problem because later on, we will dereference ctxt->hstate in
hugetlbfs_fill_super()
...
...
sb->s_blocksize = huge_page_size(ctx->hstate);
...
...
Causing below Oops.
Fix this by replacing cxt->hstate value only when then pagesize is known
to be valid.
kernel: hugetlbfs: Unsupported page size 0 MB
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028
kernel: #PF: supervisor read access in kernel mode
kernel: #PF: error_code(0x0000) - not-present page
kernel: PGD 800000010f66c067 P4D 800000010f66c067 PUD 1b22f8067 PMD 0
kernel: Oops: 0000 [#1] PREEMPT SMP PTI
kernel: CPU: 4 PID: 5659 Comm: syscall Tainted: G E 6.8.0-rc2-default+ #22 5a47c3fef76212addcc6eb71344aabc35190ae8f
kernel: Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017
kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0
kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28
kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004
kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000
kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004
kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000
kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400
kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0
kernel: Call Trace:
kernel: <TASK>
kernel: ? __die_body+0x1a/0x60
kernel: ? page_fault_oops+0x16f/0x4a0
kernel: ? search_bpf_extables+0x65/0x70
kernel: ? fixup_exception+0x22/0x310
kernel: ? exc_page_fault+0x69/0x150
kernel: ? asm_exc_page_fault+0x22/0x30
kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10
kernel: ? hugetlbfs_fill_super+0xb4/0x1a0
kernel: ? hugetlbfs_fill_super+0x28/0x1a0
kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10
kernel: vfs_get_super+0x40/0xa0
kernel: ? __pfx_bpf_lsm_capable+0x10/0x10
kernel: vfs_get_tree+0x25/0xd0
kernel: vfs_cmd_create+0x64/0xe0
kernel: __x64_sys_fsconfig+0x395/0x410
kernel: do_syscall_64+0x80/0x160
kernel: ? syscall_exit_to_user_mode+0x82/0x240
kernel: ? do_syscall_64+0x8d/0x160
kernel: ? syscall_exit_to_user_mode+0x82/0x240
kernel: ? do_syscall_64+0x8d/0x160
kernel: ? exc_page_fault+0x69/0x150
kernel: entry_SYSCALL_64_after_hwframe+0x6e/0x76
kernel: RIP: 0033:0x7ffbc0cb87c9
kernel: Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 96 0d 00 f7 d8 64 89 01 48
kernel: RSP: 002b:00007ffc29d2f388 EFLAGS: 00000206 ORIG_RAX: 00000000000001af
kernel: RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffbc0cb87c9
kernel: RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003
kernel: RBP: 00007ffc29d2f3b0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
kernel: R13: 00007ffc29d2f4c0 R14: 0000000000000000 R15: 0000000000000000
kernel: </TASK>
kernel: Modules linked in: rpcsec_gss_krb5(E) auth_rpcgss(E) nfsv4(E) dns_resolver(E) nfs(E) lockd(E) grace(E) sunrpc(E) netfs(E) af_packet(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) intel_rapl_msr(E) intel_rapl_common(E) iTCO_wdt(E) intel_pmc_bxt(E) sb_edac(E) iTCO_vendor_support(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) rfkill(E) ipmi_ssif(E) kvm(E) acpi_ipmi(E) irqbypass(E) pcspkr(E) igb(E) ipmi_si(E) mei_me(E) i2c_i801(E) joydev(E) intel_pch_thermal(E) i2c_smbus(E) dca(E) lpc_ich(E) mei(E) ipmi_devintf(E) ipmi_msghandler(E) acpi_pad(E) tiny_power_button(E) button(E) fuse(E) efi_pstore(E) configfs(E) ip_tables(E) x_tables(E) ext4(E) mbcache(E) jbd2(E) hid_generic(E) usbhid(E) sd_mod(E) t10_pi(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) polyval_clmulni(E) ahci(E) xhci_pci(E) polyval_generic(E) gf128mul(E) ghash_clmulni_intel(E) sha512_ssse3(E) sha256_ssse3(E) xhci_pci_renesas(E) libahci(E) ehci_pci(E) sha1_ssse3(E) xhci_hcd(E) ehci_hcd(E) libata(E)
kernel: mgag200(E) i2c_algo_bit(E) usbcore(E) wmi(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) scsi_common(E) aesni_intel(E) crypto_simd(E) cryptd(E)
kernel: Unloaded tainted modules: acpi_cpufreq(E):1 fjes(E):1
kernel: CR2: 0000000000000028
kernel: ---[ end trace 0000000000000000 ]---
kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0
kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28
kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004
kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000
kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004
kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000
kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400
kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0
Link: https://lkml.kernel.org/r/20240130210418.3771-1-osalvador@suse.de
Fixes: 32021982a324 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|