aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2022-05-16btrfs: open code extent_set_compress_type helpersDavid Sterba2-16/+3
The helpers extent_set_compress_type and extent_compress_type have become trivial after previous cleanups and can be removed. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: simplify handling of bio_ctrl::bio_flagsDavid Sterba3-17/+9
The bio_flags are used only to encode the compression and there are no other EXTENT_BIO_* flags, so the compress type can be stored directly. The struct member name is left unchanged and will be cleaned in later patches. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: remove trivial helper update_nr_writtenDavid Sterba1-9/+3
The helper used to do more with the wbc state but now it's just one subtraction, no need to have a special helper. It became trivial in a91326679f2a ("Btrfs: make mapping->writeback_index point to the last written page"). Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: remove unused parameter bio_flags from btrfs_wq_submit_bioDavid Sterba3-7/+5
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: remove btrfs_delayed_extent_op::is_dataDavid Sterba3-8/+3
The value of btrfs_delayed_extent_op::is_data is always false, we can cascade the change and simplify code that depends on it, removing the structure member eventually. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: sink parameter is_data to btrfs_set_disk_extent_flagsDavid Sterba3-6/+5
The parameter has been added in 2009 in the infamous monster commit 5d4f98a28c7d ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)") but not used ever since. We can sink it and allow further simplifications. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: fix deadlock between concurrent dio writes when low on free data spaceFilipe Manana1-17/+65
When reserving data space for a direct IO write we can end up deadlocking if we have multiple tasks attempting a write to the same file range, there are multiple extents covered by that file range, we are low on available space for data and the writes don't expand the inode's i_size. The deadlock can happen like this: 1) We have a file with an i_size of 1M, at offset 0 it has an extent with a size of 128K and at offset 128K it has another extent also with a size of 128K; 2) Task A does a direct IO write against file range [0, 256K), and because the write is within the i_size boundary, it takes the inode's lock (VFS level) in shared mode; 3) Task A locks the file range [0, 256K) at btrfs_dio_iomap_begin(), and then gets the extent map for the extent covering the range [0, 128K). At btrfs_get_blocks_direct_write(), it creates an ordered extent for that file range ([0, 128K)); 4) Before returning from btrfs_dio_iomap_begin(), it unlocks the file range [0, 256K); 5) Task A executes btrfs_dio_iomap_begin() again, this time for the file range [128K, 256K), and locks the file range [128K, 256K); 6) Task B starts a direct IO write against file range [0, 256K) as well. It also locks the inode in shared mode, as it's within the i_size limit, and then tries to lock file range [0, 256K). It is able to lock the subrange [0, 128K) but then blocks waiting for the range [128K, 256K), as it is currently locked by task A; 7) Task A enters btrfs_get_blocks_direct_write() and tries to reserve data space. Because we are low on available free space, it triggers the async data reclaim task, and waits for it to reserve data space; 8) The async reclaim task decides to wait for all existing ordered extents to complete (through btrfs_wait_ordered_roots()). It finds the ordered extent previously created by task A for the file range [0, 128K) and waits for it to complete; 9) The ordered extent for the file range [0, 128K) can not complete because it blocks at btrfs_finish_ordered_io() when trying to lock the file range [0, 128K). This results in a deadlock, because: - task B is holding the file range [0, 128K) locked, waiting for the range [128K, 256K) to be unlocked by task A; - task A is holding the file range [128K, 256K) locked and it's waiting for the async data reclaim task to satisfy its space reservation request; - the async data reclaim task is waiting for ordered extent [0, 128K) to complete, but the ordered extent can not complete because the file range [0, 128K) is currently locked by task B, which is waiting on task A to unlock file range [128K, 256K) and task A waiting on the async data reclaim task. This results in a deadlock between 4 task: task A, task B, the async data reclaim task and the task doing ordered extent completion (a work queue task). This type of deadlock can sporadically be triggered by the test case generic/300 from fstests, and results in a stack trace like the following: [12084.033689] INFO: task kworker/u16:7:123749 blocked for more than 241 seconds. [12084.034877] Not tainted 5.18.0-rc2-btrfs-next-115 #1 [12084.035562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [12084.036548] task:kworker/u16:7 state:D stack: 0 pid:123749 ppid: 2 flags:0x00004000 [12084.036554] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [12084.036599] Call Trace: [12084.036601] <TASK> [12084.036606] __schedule+0x3cb/0xed0 [12084.036616] schedule+0x4e/0xb0 [12084.036620] btrfs_start_ordered_extent+0x109/0x1c0 [btrfs] [12084.036651] ? prepare_to_wait_exclusive+0xc0/0xc0 [12084.036659] btrfs_run_ordered_extent_work+0x1a/0x30 [btrfs] [12084.036688] btrfs_work_helper+0xf8/0x400 [btrfs] [12084.036719] ? lock_is_held_type+0xe8/0x140 [12084.036727] process_one_work+0x252/0x5a0 [12084.036736] ? process_one_work+0x5a0/0x5a0 [12084.036738] worker_thread+0x52/0x3b0 [12084.036743] ? process_one_work+0x5a0/0x5a0 [12084.036745] kthread+0xf2/0x120 [12084.036747] ? kthread_complete_and_exit+0x20/0x20 [12084.036751] ret_from_fork+0x22/0x30 [12084.036765] </TASK> [12084.036769] INFO: task kworker/u16:11:153787 blocked for more than 241 seconds. [12084.037702] Not tainted 5.18.0-rc2-btrfs-next-115 #1 [12084.038540] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [12084.039506] task:kworker/u16:11 state:D stack: 0 pid:153787 ppid: 2 flags:0x00004000 [12084.039511] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [12084.039551] Call Trace: [12084.039553] <TASK> [12084.039557] __schedule+0x3cb/0xed0 [12084.039566] schedule+0x4e/0xb0 [12084.039569] schedule_timeout+0xed/0x130 [12084.039573] ? mark_held_locks+0x50/0x80 [12084.039578] ? _raw_spin_unlock_irq+0x24/0x50 [12084.039580] ? lockdep_hardirqs_on+0x7d/0x100 [12084.039585] __wait_for_common+0xaf/0x1f0 [12084.039587] ? usleep_range_state+0xb0/0xb0 [12084.039596] btrfs_wait_ordered_extents+0x3d6/0x470 [btrfs] [12084.039636] btrfs_wait_ordered_roots+0x175/0x240 [btrfs] [12084.039670] flush_space+0x25b/0x630 [btrfs] [12084.039712] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [12084.039747] process_one_work+0x252/0x5a0 [12084.039756] ? process_one_work+0x5a0/0x5a0 [12084.039758] worker_thread+0x52/0x3b0 [12084.039762] ? process_one_work+0x5a0/0x5a0 [12084.039765] kthread+0xf2/0x120 [12084.039766] ? kthread_complete_and_exit+0x20/0x20 [12084.039770] ret_from_fork+0x22/0x30 [12084.039783] </TASK> [12084.039800] INFO: task kworker/u16:17:217907 blocked for more than 241 seconds. [12084.040709] Not tainted 5.18.0-rc2-btrfs-next-115 #1 [12084.041398] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [12084.042404] task:kworker/u16:17 state:D stack: 0 pid:217907 ppid: 2 flags:0x00004000 [12084.042411] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] [12084.042461] Call Trace: [12084.042463] <TASK> [12084.042471] __schedule+0x3cb/0xed0 [12084.042485] schedule+0x4e/0xb0 [12084.042490] wait_extent_bit.constprop.0+0x1eb/0x260 [btrfs] [12084.042539] ? prepare_to_wait_exclusive+0xc0/0xc0 [12084.042551] lock_extent_bits+0x37/0x90 [btrfs] [12084.042601] btrfs_finish_ordered_io.isra.0+0x3fd/0x960 [btrfs] [12084.042656] ? lock_is_held_type+0xe8/0x140 [12084.042667] btrfs_work_helper+0xf8/0x400 [btrfs] [12084.042716] ? lock_is_held_type+0xe8/0x140 [12084.042727] process_one_work+0x252/0x5a0 [12084.042742] worker_thread+0x52/0x3b0 [12084.042750] ? process_one_work+0x5a0/0x5a0 [12084.042754] kthread+0xf2/0x120 [12084.042757] ? kthread_complete_and_exit+0x20/0x20 [12084.042763] ret_from_fork+0x22/0x30 [12084.042783] </TASK> [12084.042798] INFO: task fio:234517 blocked for more than 241 seconds. [12084.043598] Not tainted 5.18.0-rc2-btrfs-next-115 #1 [12084.044282] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [12084.045244] task:fio state:D stack: 0 pid:234517 ppid:234515 flags:0x00004000 [12084.045248] Call Trace: [12084.045250] <TASK> [12084.045254] __schedule+0x3cb/0xed0 [12084.045263] schedule+0x4e/0xb0 [12084.045266] wait_extent_bit.constprop.0+0x1eb/0x260 [btrfs] [12084.045298] ? prepare_to_wait_exclusive+0xc0/0xc0 [12084.045306] lock_extent_bits+0x37/0x90 [btrfs] [12084.045336] btrfs_dio_iomap_begin+0x336/0xc60 [btrfs] [12084.045370] ? lock_is_held_type+0xe8/0x140 [12084.045378] iomap_iter+0x184/0x4c0 [12084.045383] __iomap_dio_rw+0x2c6/0x8a0 [12084.045406] iomap_dio_rw+0xa/0x30 [12084.045408] btrfs_do_write_iter+0x370/0x5e0 [btrfs] [12084.045440] aio_write+0xfa/0x2c0 [12084.045448] ? __might_fault+0x2a/0x70 [12084.045451] ? kvm_sched_clock_read+0x14/0x40 [12084.045455] ? lock_release+0x153/0x4a0 [12084.045463] io_submit_one+0x615/0x9f0 [12084.045467] ? __might_fault+0x2a/0x70 [12084.045469] ? kvm_sched_clock_read+0x14/0x40 [12084.045478] __x64_sys_io_submit+0x83/0x160 [12084.045483] ? syscall_enter_from_user_mode+0x1d/0x50 [12084.045489] do_syscall_64+0x3b/0x90 [12084.045517] entry_SYSCALL_64_after_hwframe+0x44/0xae [12084.045521] RIP: 0033:0x7fa76511af79 [12084.045525] RSP: 002b:00007ffd6d6b9058 EFLAGS: 00000246 ORIG_RAX: 00000000000000d1 [12084.045530] RAX: ffffffffffffffda RBX: 00007fa75ba6e760 RCX: 00007fa76511af79 [12084.045532] RDX: 0000557b304ff3f0 RSI: 0000000000000001 RDI: 00007fa75ba4c000 [12084.045535] RBP: 00007fa75ba4c000 R08: 00007fa751b76000 R09: 0000000000000330 [12084.045537] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [12084.045540] R13: 0000000000000000 R14: 0000557b304ff3f0 R15: 0000557b30521eb0 [12084.045561] </TASK> Fix this issue by always reserving data space before locking a file range at btrfs_dio_iomap_begin(). If we can't reserve the space, then we don't error out immediately - instead after locking the file range, check if we can do a NOCOW write, and if we can we don't error out since we don't need to allocate a data extent, however if we can't NOCOW then error out with -ENOSPC. This also implies that we may end up reserving space when it's not needed because the write will end up being done in NOCOW mode - in that case we just release the space after we noticed we did a NOCOW write - this is the same type of logic that is done in the path for buffered IO writes. Fixes: f0bfa76a11e93d ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range") CC: stable@vger.kernel.org # 5.17+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: derive compression type from extent map during readsGoldwyn Rodrigues3-8/+7
Derive the compression type from extent map as opposed to the bio flags passed. This makes it more precise and not reliant on function parameters. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: scrub: move scrub_remap_extent() call into scrub_extent()Qu Wenruo1-27/+35
[SUSPICIOUS CODE] When refactoring scrub code, I noticed a very strange behavior around scrub_remap_extent(): if (sctx->is_dev_replace) scrub_remap_extent(fs_info, cur_logical, scrub_len, &cur_physical, &target_dev, &cur_mirror); As replace target is a 1:1 copy of the source device, thus physical offset inside the target should be the same as physical inside source, thus this remap call makes no sense to me. [REAL FUNCTIONALITY] After more investigation, the function name scrub_remap_extent() doesn't tell anything of the truth, nor does its if () condition. The real story behind this function is that, for scrub_pages() we never expect missing device, even for replacing missing device. What scrub_remap_extent() is really doing is to find a live mirror, and make later scrub_pages() to read data from the good copy, other than from the missing device and increase error counters unnecessarily. [IMPROVEMENT] We have no need to bother scrub_remap_extent() in scrub_simple_mirror() at all, we only need to call it before we call scrub_pages(). And rename the function to scrub_find_live_copy(), add extra comments on them. By this we can remove one parameter from scrub_extent(), and reduce the unnecessary calls to scrub_remap_extent() for regular replace. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: scrub: use find_first_extent_item to for extent item searchQu Wenruo1-73/+25
Since we have find_first_extent_item() to iterate the extent items of a certain range, there is no need to use the open-coded version. Replace the final scrub call site with find_first_extent_item(). Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: scrub: refactor scrub_raid56_parity()Qu Wenruo1-181/+164
Currently scrub_raid56_parity() has a large double loop, handling the following things at the same time: - Iterate each data stripe - Iterate each extent item in one data stripe Refactor this by: - Introduce a new helper to handle data stripe iteration The new helper is scrub_raid56_data_stripe_for_parity(), which only has one while() loop handling the extent items inside the data stripe. The code is still mostly the same as the old code. - Call cond_resched() for each extent Previously we only call cond_resched() under a complex if () check. I see no special reason to do that, and for other scrub functions, like scrub_simple_mirror() we're already doing the same cond_resched() after scrubbing one extent. - Add more comments Please note that, this patch is only to address the double loop, there are incoming patches to do extra cleanup. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: scrub: use scrub_simple_mirror() to handle RAID56 data stripe scrubQu Wenruo1-226/+21
Although RAID56 has complex repair mechanism, which involves reading the whole full stripe, but inside one data stripe, it's in fact no different than SINGLE/RAID1. The point here is, for data stripe we just check the csum for each extent we hit. Only for csum mismatch case, our repair paths divide. So we can still reuse scrub_simple_mirror() for RAID56 data stripes, which saves quite some code. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: scrub: cleanup the non-RAID56 branches in scrub_stripe()Qu Wenruo1-77/+51
Since we have moved all other profiles handling into their own functions, now the main body of scrub_stripe() is just handling RAID56 profiles. There is no need to address other profiles in the main loop of scrub_stripe(), so we can remove those dead branches. Since we're here, also slightly change the timing of initialization of variables like @offset, @increment and @logical. Especially for @logical, we don't really need to initialize it for btrfs_extent_root()/btrfs_csum_root(), we can use bg->start for that purpose. Now those variables are only initialize for RAID56 branches. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: scrub: introduce dedicated helper to scrub simple-stripe based rangeQu Wenruo1-12/+88
The new entrance will iterate through each data stripe which belongs to the target device. And since inside each data stripe, RAID0 is just SINGLE, while RAID10 is just RAID1, we can reuse scrub_simple_mirror() to do the scrub properly. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: scrub: introduce dedicated helper to scrub simple-mirror based rangeQu Wenruo1-0/+188
The new helper, scrub_simple_mirror(), will scrub all extents inside a range which only has simple mirror based duplication. This covers every range of SINGLE/DUP/RAID1/RAID1C*, and inside each data stripe for RAID0/RAID10. Currently we will use this function to scrub SINGLE/DUP/RAID1/RAID1C* profiles. As one can see, the new entrance for those simple-mirror based profiles can be small enough (with comments, just reach 100 lines). This function will be the basis for the incoming scrub refactor. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: scrub: introduce a helper to locate an extent itemQu Wenruo1-0/+107
The new helper, find_first_extent_item(), will locate an extent item (either EXTENT_ITEM or METADATA_ITEM) which covers any byte of the search range. This helper will later be used to refactor scrub code. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: calculate physical_end using dev_extent_len directly in scrub_stripe()Qu Wenruo1-4/+2
The variable @physical_end is the exclusive stripe end, currently it's calculated using @physical + @dev_extent_len / map->stripe_len * map->stripe_len. And since at allocation time we ensured dev_extent_len is stripe_len aligned, the result is the same as @physical + @dev_extent_len. So this patch will just assign @physical and @physical_end early, without using @nstripes. This is especially helpful for any possible out: label user, as now we only need to initialize @offset before going to out: label. Since we're here, also make @physical_end constant. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: turn fs_roots_radix in btrfs_fs_info into an XArrayGabriel Niebler6-171/+139
… rename it to simply fs_roots and adjust all usages of this object to use the XArray API, because it is notionally easier to use and understand, as it provides array semantics, and also takes care of locking for us, further simplifying the code. Also do some refactoring, esp. where the API change requires largely rewriting some functions, anyway. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Gabriel Niebler <gniebler@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: turn fs_info member buffer_radix into XArrayGabriel Niebler4-97/+55
… named 'extent_buffers'. Also adjust all usages of this object to use the XArray API, which greatly simplifies the code as it takes care of locking and is generally easier to use and understand, providing notionally simpler array semantics. Also perform some light refactoring. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Gabriel Niebler <gniebler@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: turn name_cache radix tree into XArray in send_ctxGabriel Niebler1-22/+18
… and adjust all usages of this object to use the XArray API for the sake of consistency. XArray API provides array semantics, so it is notionally easier to use and understand, and it also takes care of locking for us. None of this makes a real difference in this particular patch, but it does in other places where similar replacements are or have been made and we want to be consistent in our usage of data structures in btrfs. Signed-off-by: Gabriel Niebler <gniebler@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: turn delayed_nodes_tree into an XArrayGabriel Niebler4-50/+44
… in the btrfs_root struct and adjust all usages of this object to use the XArray API, because it is notionally easier to use and understand, as it provides array semantics, and also takes care of locking for us, further simplifying the code. Also use the opportunity to do some light refactoring. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Gabriel Niebler <gniebler@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: use ilog2() to replace if () branches for btrfs_bg_flags_to_raid_index()Qu Wenruo2-27/+36
In function btrfs_bg_flags_to_raid_index(), we use quite some if () to convert the BTRFS_BLOCK_GROUP_* bits to a index number. But the truth is, there is really no such need for so many branches at all. Since all BTRFS_BLOCK_GROUP_* flags are just one single bit set inside BTRFS_BLOCK_GROUP_PROFILES_MASK, we can easily use ilog2() to calculate their values. This calculation has an anchor point, the lowest PROFILE bit, which is RAID0. Even it's fixed on-disk format and should never change, here I added extra compile time checks to make it super safe: 1. Make sure RAID0 is always the lowest bit in PROFILE_MASK This is done by finding the first (least significant) bit set of RAID0 and PROFILE_MASK & ~RAID0. 2. Make sure RAID0 bit set beyond the highest bit of TYPE_MASK Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: move definition of btrfs_raid_types to volumes.hQu Wenruo2-0/+15
It's only internally used as another way to represent btrfs profiles, it's not exposed through any on-disk format, in fact this btrfs_raid_types is diverted from the on-disk format values. Furthermore, since it's internal structure, its definition can change in the future. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: use a normal workqueue for rmw_workersChristoph Hellwig3-19/+18
rmw_workers doesn't need ordered execution or thread disabling threshold (as the thresh parameter is less than DFT_THRESHOLD). Just switch to the normal workqueues that use a lot less resources, especially in the work_struct vs btrfs_work structures. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: use normal workqueues for scrubChristoph Hellwig3-46/+41
All three scrub workqueues don't need ordered execution or thread disabling threshold (as the thresh parameter is less than DFT_THRESHOLD). Just switch to the normal workqueues that use a lot less resources, especially in the work_struct vs btrfs_work structures. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: simplify WQ_HIGHPRI handling in struct btrfs_workqueueChristoph Hellwig5-111/+35
Just let the one caller that wants optional WQ_HIGHPRI handling allocate a separate btrfs_workqueue for that. This allows to rename struct __btrfs_workqueue to btrfs_workqueue, remove a pointer indirection and separate allocation for all btrfs_workqueue users and generally simplify the code. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: enable subpage support for RAID56Qu Wenruo3-21/+0
Now the btrfs RAID56 infrastructure has migrated to use sector_ptr interface, it should be safe to enable subpage support for RAID56. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make alloc_rbio_essential_pages() subpage compatibleQu Wenruo1-7/+9
The non-compatible part is only the bitmap iteration part, now the bitmap size is extended to rbio::stripe_nsectors, not the old rbio::stripe_npages. Since we're here, also slightly improve the function by: - Rename @i to @stripe - Rename @bit to @sectornr - Move @page and @index into the inner loop Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make steal_rbio() subpage compatibleQu Wenruo1-4/+24
Function steal_rbio() will take all the uptodate pages from the source rbio to destination rbio. With the new stripe_sectors[] array, we also need to do the extra check: - Check sector::flags to make sure the full page is uptodate Now we don't use PageUptodate flag for subpage cases to indicate if the page is uptodate. Instead we need to check all the sectors belong to the page to be sure about whether it's full page uptodate. So here we introduce a new helper, full_page_sectors_uptodate() to do the check. - Update rbio::stripe_sectors[] to use the new page pointer We only need to change the page pointer, no need to change anything else. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make set_bio_pages_uptodate() subpage compatibleQu Wenruo1-6/+36
Unlike previous code, we can not directly set PageUptodate for stripe pages now. Instead we have to iterate through all the sectors and set SECTOR_UPTODATE flag there. Introduce a new helper find_stripe_sector(), to do the work. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: remove btrfs_raid_bio::bio_pages arrayQu Wenruo1-40/+3
The functionality is completely replaced by the new bio_sectors member, now it's time to remove the old member. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make raid56_add_scrub_pages() subpage compatibleQu Wenruo3-6/+12
This requires one extra parameter @pgoff for the function. In the current code base, scrub is still one page per sector, thus the new parameter will always be 0. It needs the extra subpage scrub optimization code to fully take advantage. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: open code rbio_stripe_page_index()Qu Wenruo1-6/+1
There is only one caller for that helper now, and we're definitely fine to open-code it. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make finish_rmw() subpage compatibleQu Wenruo1-77/+32
With this function converted to subpage compatible sector interfaces, the following helper functions can be removed: - rbio_stripe_page() - rbio_pstripe_page() - rbio_qstripe_page() - page_in_rbio() Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make __raid_recover_endio_io() subpage compatibleQu Wenruo1-23/+28
This involves: - Use sector_ptr interface to grab the pointers - Add sector->pgoff to pointers[] - Rebuild data using sectorsize instead of PAGE_SIZE - Use memcpy() to replace copy_page() Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make finish_parity_scrub() subpage compatibleQu Wenruo1-24/+32
The core is to convert direct page usage into sector_ptr usage, and use memcpy() to replace copy_page(). For pointers usage, we need to convert it to kmap_local_page() + sector->pgoff. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make rbio_add_io_page() subpage compatibleQu Wenruo1-89/+165
Make rbio_add_io_page() subpage compatible, which involves: - Rename rbio_add_io_page() to rbio_add_io_sector() Although we still rely on PAGE_SIZE == sectorsize, so add a new ASSERT() inside rbio_add_io_sector() to make sure all pgoff is 0. - Introduce rbio_stripe_sector() helper The equivalent of rbio_stripe_page(). This new helper has extra ASSERT()s to validate the stripe and sector number. - Introduce sector_in_rbio() helper The equivalent of page_in_rbio(). - Rename @pagenr variables to @sectornr - Use rbio::stripe_nsectors when iterating the bitmap Please note that, this only changes the interface, the bios are still using full page for IO. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: introduce btrfs_raid_bio::bio_sectorsQu Wenruo1-2/+55
This new member is going to fully replace bio_pages in the future, but for now let's keep them co-exist, until the full switch is done. Currently cache_rbio_pages() and index_rbio_pages() will also populate the new array. And cache_rbio_pages() need to record which sectors are uptodate, so we also need to introduce sector_ptr::uptodate bit. To avoid extra memory usage, we let the new @uptodate bit to share bits with @pgoff. Now pgoff only has at most 31 bits, which is already more than enough, as even for 256K page size, we only need 18 bits. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: introduce btrfs_raid_bio::stripe_sectorsQu Wenruo1-4/+56
The new member is an array of sector_ptr pointers, they will represent all sectors inside a full stripe (including P/Q). They co-operate with btrfs_raid_bio::stripe_pages: stripe_pages: | Page 0, range [0, 64K) | Page 1 ... stripe_sectors: | | | ... | | | | \- sector 15, page 0, pgoff=60K | \- sector 1, page 0, pgoff=4K \---- sector 0, page 0, pfoff=0 With such structure, we can represent subpage sectors without using extra pages. Here we introduce a new helper, index_stripe_sectors(), to update stripe_sectors[] to point to correct page and pgoff. So every time rbio::stripe_pages[] pointer gets updated, the new helper should be called. The following functions have to call the new helper: - steal_rbio() - alloc_rbio_pages() - alloc_rbio_parity_pages() - alloc_rbio_essential_pages() Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: introduce new cached members for btrfs_raid_bioQu Wenruo1-6/+17
The new members are all related to number of sectors, but the existing number of pages members are kept as is: - nr_sectors Total sectors of the full stripe including P/Q. - stripe_nsectors The sectors of a single stripe. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: make btrfs_raid_bio more compactQu Wenruo1-19/+21
There are a lot of members using much larger type in btrfs_raid_bio than necessary, like nr_pages which represents the total number of a full stripe. Instead of int (which is at least 32bits), u16 is already enough (max stripe length will be 256MiB, already beyond current RAID56 device number limit). So this patch will reduce the width of the following members: - stripe_len to u32 - nr_pages to u16 - nr_data to u8 - real_stripes to u8 - scrubp to u8 - faila/b to s8 As -1 is used to indicate no corruption This will slightly reduce the size of btrfs_raid_bio from 272 bytes to 256 bytes, reducing 16 bytes usage. But please note that, when using btrfs_raid_bio, we allocate extra space for it to cover various pointer array, so the reduce memory is not really a big saving overall. As we're here modifying the comments already, update existing comments to current code standard. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: raid56: open code rbio_nr_pages()Qu Wenruo1-13/+5
The function rbio_nr_pages() is only called once inside alloc_rbio(), there is no reason to make it dedicated helper. Furthermore, the return type doesn't match, the function return "unsigned long" which may not be necessary, while the only caller only uses "int". Since we're doing cleaning up here, also fix the type to "const unsigned int" for all involved local variables. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: reduce width for stripe_len from u64 to u32Qu Wenruo4-29/+22
Currently btrfs uses fixed stripe length (64K), thus u32 is wide enough for the usage. Furthermore, even in the future we choose to enlarge stripe length to larger values, I don't believe we would want stripe as large as 4G or larger. So this patch will reduce the width for all in-memory structures and parameters, this involves: - RAID56 related function argument lists This allows us to do direct division related to stripe_len. Although we will use bits shift to replace the division anyway. - btrfs_io_geometry structure This involves one change to simplify the calculation of both @stripe_nr and @stripe_offset, using div64_u64_rem(). And add extra sanity check to make sure @stripe_offset is always small enough for u32. This saves 8 bytes for the structure. - map_lookup structure This convert @stripe_len to u32, which saves 8 bytes. (saved 4 bytes, and removed a 4-bytes hole) Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: do not return errors from submit_bio_hook_t instancesChristoph Hellwig3-18/+11
Both btrfs_repair_one_sector and submit_bio_one as the direct caller of one of the instances ignore errors as they expect the methods themselves to call ->bi_end_io on error. Remove the unused and dangerous return value. Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: do not return errors from btrfs_submit_compressed_readChristoph Hellwig3-13/+10
btrfs_submit_compressed_read already calls ->bi_end_io on error and the caller must ignore the return value, so remove it. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: do not return errors from btrfs_submit_metadata_bioChristoph Hellwig2-18/+10
btrfs_submit_metadata_bio already calls ->bi_end_io on error and the caller must ignore the return value, so remove it. Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: remove unused bio_flags argument to btrfs_submit_metadata_bioChristoph Hellwig3-4/+3
This argument is unused since commit 953651eb308f ("btrfs: factor out helper adding a page to bio") and commit 1b36294a6cd5 ("btrfs: call submit_bio_hook directly for metadata pages") reworked the way metadata bio submission is handled. Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: move btrfs_readpage to extent_io.cChristoph Hellwig4-38/+34
Keep btrfs_readpage next to btrfs_do_readpage and the other address space operations. This allows to keep submit_one_bio and struct btrfs_bio_ctrl file local in extent_io.c. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: repair super block num_devices automaticallyQu Wenruo1-4/+4
[BUG] There is a report that a btrfs has a bad super block num devices. This makes btrfs to reject the fs completely. BTRFS error (device sdd3): super_num_devices 3 mismatch with num_devices 2 found here BTRFS error (device sdd3): failed to read chunk tree: -22 BTRFS error (device sdd3): open_ctree failed [CAUSE] During btrfs device removal, chunk tree and super block num devs are updated in two different transactions: btrfs_rm_device() |- btrfs_rm_dev_item(device) | |- trans = btrfs_start_transaction() | | Now we got transaction X | | | |- btrfs_del_item() | | Now device item is removed from chunk tree | | | |- btrfs_commit_transaction() | Transaction X got committed, super num devs untouched, | but device item removed from chunk tree. | (AKA, super num devs is already incorrect) | |- cur_devices->num_devices--; |- cur_devices->total_devices--; |- btrfs_set_super_num_devices() All those operations are not in transaction X, thus it will only be written back to disk in next transaction. So after the transaction X in btrfs_rm_dev_item() committed, but before transaction X+1 (which can be minutes away), a power loss happen, then we got the super num mismatch. This has been fixed by commit bbac58698a55 ("btrfs: remove device item and update super block in the same transaction"). [FIX] Make the super_num_devices check less strict, converting it from a hard error to a warning, and reset the value to a correct one for the current or next transaction commit. As the number of device items is the critical information where the super block num_devices is only a cached value (and also useful for cross checking), it's safe to automatically update it. Other device related problems like missing device are handled after that and may require other means to resolve, like degraded mount. With this fix, potentially affected filesystems won't fail mount and require the manual repair by btrfs check. Reported-by: Luca Béla Palkovics <luca.bela.palkovics@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CA+8xDSpvdm_U0QLBAnrH=zqDq_cWCOH5TiV46CKmp3igr44okQ@mail.gmail.com/ CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16btrfs: do not pass compressed_bio to submit_compressed_bio()Goldwyn Rodrigues1-3/+2
Parameter struct compressed_bio is not used by the function submit_compressed_bio(). Remove it. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Powered by cgit, Gruvboxed by Blaster4385.