| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull xfs fixes from Darrick Wong:
"A few fixes for issues in the new online shrink code, additional
corrections for my recent bug-hunt w.r.t. extent size hints on
realtime, and improved input checking of the GROWFSRT ioctl.
IOW, the usual 'I somehow got bored during the merge window and
resumed auditing the farther reaches of xfs':
- Fix shrink eligibility checking when sparse inode clusters enabled
- Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later
- Don't report unusable extent size hints to FSGETXATTR
- Don't warn when extent size hints are unusable because the sysadmin
configured them that way
- Fix insufficient parameter validation in GROWFSRT ioctl
- Fix integer overflow when adding rt volumes to filesystem"
* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: detect misaligned rtinherit directory extent size hints
xfs: fix an integer overflow error in xfs_growfs_rt
xfs: improve FSGROWFSRT precondition checking
xfs: don't expose misaligned extszinherit hints to userspace
xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
xfs: reset child dir '..' entry when unlinking child
xfs: check for sparse inode clusters that cross new EOAG when shrinking
|
|
While auditing the realtime growfs code, I realized that the GROWFSRT
ioctl (and by extension xfs_growfs) has always allowed sysadmins to
change the realtime extent size when adding a realtime section to the
filesystem. Since we also have always allowed sysadmins to set
RTINHERIT and EXTSZINHERIT on directories even if there is no realtime
device, this invalidates the premise laid out in the comments added in
commit 603f000b15f2.
In other words, this is not a case of inadequate metadata validation.
This is a case of nearly forgotten (and apparently untested) but
supported functionality. Update the comments to reflect what we've
learned, and remove the log message about correcting the misalignment.
Fixes: 603f000b15f2 ("xfs: validate extsz hints against rt extent size when rtinherit is set")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Carlos Maiolino <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
While running xfs/168, I noticed occasional write verifier shutdowns
involving inodes at the very end of the filesystem. Existing inode
btree validation code checks that all inode clusters are fully contained
within the filesystem.
However, due to inadequate checking in the fs shrink code, it's possible
that there could be a sparse inode cluster at the end of the filesystem
where the upper inodes of the cluster are marked as holes and the
corresponding blocks are free. In this case, the last blocks in the AG
are listed in the bnobt. This enables the shrink to proceed but results
in a filesystem that trips the inode verifiers. Fix this by disallowing
the shrink.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix
the following warnings by replacing /* fallthrough */ comments,
and its variants, with the new pseudo-keyword macro fallthrough:
fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Notice that Clang doesn't recognize /* fallthrough */ comments as
implicit fall-through markings, so in order to globally enable
-Wimplicit-fallthrough for Clang, these comments need to be
replaced with fallthrough; in the whole codebase.
Link: https://github.com/KSPP/linux/issues/115
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
|
|
Pull xfs updates from Darrick Wong:
"Most of the work this cycle has been on refactoring various parts of
the codebase. The biggest non-cleanup changes are (1) reducing the
number of cache flushes sent when writing the log; (2) a substantial
number of log recovery fixes; and (3) I started accepting pull
requests from contributors if the commits in their branches match
what's been sent to the list.
For a week or so I /had/ staged a major cleanup of the logging code
from Dave Chinner, but it exposed so many lurking bugs in other parts
of the logging and log recovery code that I decided to defer that
patchset until we can address those latent bugs.
Larger cleanups this time include walking the incore inode cache (me)
and rework of the extended attribute code (Allison) to prepare it for
adding logged xattr updates (and directory tree parent pointers) in
future releases.
Summary:
- Refactor the buffer cache to use bulk page allocation
- Convert agnumber-based AG iteration to walk per-AG structures
- Clean up some unit conversions and other code warts
- Reduce spinlock contention in the directio fastpath
- Collapse all the inode cache walks into a single function
- Remove indirect function calls from the inode cache walk code
- Dramatically reduce the number of cache flushes sent when writing
log buffers
- Preserve inode sickness reports for longer
- Rename xfs_eofblocks since it controls inode cache walks
- Refactor the extended attribute code to prepare it for the addition
of log intent items to make xattrs fully transactional
- A few fixes to earlier large patchsets
- Log recovery fixes so that we don't accidentally mark the log clean
when log intent recovery fails
- Fix some latent SOB errors
- Clean up shutdown messages that get logged to dmesg
- Fix a regression in the online shrink code
- Fix a UAF in the buffer logging code if the fs goes offline
- Fix uninitialized error variables
- Fix a UAF in the CIL when commited log item callbacks race with a
shutdown
- Fix a bug where the CIL could hang trying to push part of the log
ring buffer that hasn't been filled yet"
* tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (102 commits)
xfs: don't wait on future iclogs when pushing the CIL
xfs: Fix a CIL UAF by getting get rid of the iclog callback lock
xfs: remove callback dequeue loop from xlog_state_do_iclog_callbacks
xfs: don't nest icloglock inside ic_callback_lock
xfs: Initialize error in xfs_attr_remove_iter
xfs: fix endianness issue in xfs_ag_shrink_space
xfs: remove dead stale buf unpin handling code
xfs: hold buffer across unpin and potential shutdown processing
xfs: force the log offline when log intent item recovery fails
xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes
xfs: shorten the shutdown messages to a single line
xfs: print name of function causing fs shutdown instead of hex pointer
xfs: fix type mismatches in the inode reclaim functions
xfs: separate primary inode selection criteria in xfs_iget_cache_hit
xfs: refactor the inode recycling code
xfs: add iclog state trace events
xfs: xfs_log_force_lsn isn't passed a LSN
xfs: Fix CIL throttle hang when CIL space used going backwards
xfs: journal IO cache flush reductions
xfs: remove need_start_rec parameter from xlog_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"Fix many fall-through warnings when building with Clang 12.0.0 and
'-Wimplicit-fallthrough' so that we at some point will be able to
enable that warning by default"
* tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits)
rxrpc: Fix fall-through warnings for Clang
drm/nouveau/clk: Fix fall-through warnings for Clang
drm/nouveau/therm: Fix fall-through warnings for Clang
drm/nouveau: Fix fall-through warnings for Clang
xfs: Fix fall-through warnings for Clang
xfrm: Fix fall-through warnings for Clang
tipc: Fix fall-through warnings for Clang
sctp: Fix fall-through warnings for Clang
rds: Fix fall-through warnings for Clang
net/packet: Fix fall-through warnings for Clang
net: netrom: Fix fall-through warnings for Clang
ide: Fix fall-through warnings for Clang
hwmon: (max6621) Fix fall-through warnings for Clang
hwmon: (corsair-cpro) Fix fall-through warnings for Clang
firewire: core: Fix fall-through warnings for Clang
braille_console: Fix fall-through warnings for Clang
ipv4: Fix fall-through warnings for Clang
qlcnic: Fix fall-through warnings for Clang
bnxt_en: Fix fall-through warnings for Clang
netxen_nic: Fix fall-through warnings for Clang
...
|
|
A recent bug report generated a warning that a code path in
xfs_attr_remove_iter could potentially return error uninitialized in the
case of XFS_DAS_RM_SHRINK state. Fix this by initializing error.
Signed-off-by: Allison Henderson <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Bill O'Donnell <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
The AGI buffer is in big-endian format, so we must convert the
endianness to CPU format to do any comparisons.
Fixes: 46141dc891f7 ("xfs: introduce xfs_ag_shrink_space()")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
|
|
In doing an investigation into AIL push stalls, I was looking at the
log force code to see if an async CIL push could be done instead.
This lead me to xfs_log_force_lsn() and looking at how it works.
xfs_log_force_lsn() is only called from inode synchronisation
contexts such as fsync(), and it takes the ip->i_itemp->ili_last_lsn
value as the LSN to sync the log to. This gets passed to
xlog_cil_force_lsn() via xfs_log_force_lsn() to flush the CIL to the
journal, and then used by xfs_log_force_lsn() to flush the iclogs to
the journal.
The problem is that ip->i_itemp->ili_last_lsn does not store a
log sequence number. What it stores is passed to it from the
->iop_committing method, which is called by xfs_log_commit_cil().
The value this passes to the iop_committing method is the CIL
context sequence number that the item was committed to.
As it turns out, xlog_cil_force_lsn() converts the sequence to an
actual commit LSN for the related context and returns that to
xfs_log_force_lsn(). xfs_log_force_lsn() overwrites it's "lsn"
variable that contained a sequence with an actual LSN and then uses
that to sync the iclogs.
This caused me some confusion for a while, even though I originally
wrote all this code a decade ago. ->iop_committing is only used by
a couple of log item types, and only inode items use the sequence
number it is passed.
Let's clean up the API, CIL structures and inode log item to call it
a sequence number, and make it clear that the high level code is
using CIL sequence numbers and not on-disk LSNs for integrity
synchronisation purposes.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Allison Henderson <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
We don't need to look at the xfs_mount and superblock every time we
need to do an iclog roundoff calculation. The property is fixed for
the life of the log, so store the roundoff in the log at mount time
and use that everywhere.
On a debug build:
$ size fs/xfs/xfs_log.o.*
text data bss dec hex filename
27360 560 8 27928 6d18 fs/xfs/xfs_log.o.orig
27219 560 8 27787 6c8b fs/xfs/xfs_log.o.patched
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Allison Henderson <[email protected]>
|
|
Dan Carpenter's static checker reported:
The patch 7b13c5155182: "xfs: use perag for ialloc btree cursors"
from Jun 2, 2021, leads to the following Smatch complaint:
fs/xfs/libxfs/xfs_ialloc.c:2403 xfs_imap()
error: we previously assumed 'pag' could be null (see line 2294)
And it's right. Fix it.
Fixes: 7b13c5155182 ("xfs: use perag for ialloc btree cursors")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Allison Henderson <[email protected]>
|
|
https://github.com/allisonhenderson/xfs_work into xfs-5.14-merge4
xfs: Delay Ready Attributes
Hi all,
This set is a subset of a larger series for Dealyed Attributes. Which is a
subset of a yet larger series for parent pointers. Delayed attributes allow
attribute operations (set and remove) to be logged and committed in the same
way that other delayed operations do. This allows more complex operations (like
parent pointers) to be broken up into multiple smaller transactions. To do
this, the existing attr operations must be modified to operate as a delayed
operation. This means that they cannot roll, commit, or finish transactions.
Instead, they return -EAGAIN to allow the calling function to handle the
transaction. In this series, we focus on only the delayed attribute portion.
We will introduce parent pointers in a later set.
The set as a whole is a bit much to digest at once, so I usually send out the
smaller sub series to reduce reviewer burn out. But the entire extended series
is visible through the included github links.
Updates since v19: Added Darricks fix for the remote block accounting as well as
some minor nits about the default assert in xfs_attr_set_iter. Spent quite
a bit of time testing this cycle to weed out any more unexpected bugs. No new
test failures were observed with the addition of this set.
xfs: Fix default ASSERT in xfs_attr_set_iter
Replaced the assert with ASSERT(0);
xfs: Add delay ready attr remove routines
Added Darricks fix for remote block accounting
This series can be viewed on github here:
https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_v20
As well as the extended delayed attribute and parent pointer series:
https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_v20_extended
And the test cases:
https://github.com/allisonhenderson/xfs_work/tree/pptr_xfstestsv3
In order to run the test cases, you will need have the corresponding xfsprogs
changes as well. Which can be found here:
https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_xfsprogs_v20
https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_xfsprogs_v20_extended
To run the xfs attributes tests run:
check -g attr
To run as delayed attributes run:
export MOUNT_OPTIONS="-o delattr"
check -g attr
To run parent pointer tests:
check -g parent
I've also made the corresponding updates to the user space side as well, and ported anything
they need to seat correctly.
Questions, comment and feedback appreciated!
Thanks all!
Allison
* tag 'xfs-delay-ready-attrs-v20.1' of https://github.com/allisonhenderson/xfs_work:
xfs: Make attr name schemes consistent
xfs: Fix default ASSERT in xfs_attr_set_iter
xfs: Clean up xfs_attr_node_addname_clear_incomplete
xfs: Remove xfs_attr_rmtval_set
xfs: Add delay ready attr set routines
xfs: Add delay ready attr remove routines
xfs: Hoist node transaction handling
xfs: Hoist xfs_attr_leaf_addname
xfs: Hoist xfs_attr_node_addname
xfs: Add helper xfs_attr_node_addname_find_attr
xfs: Separate xfs_attr_node_addname and xfs_attr_node_addname_clear_incomplete
xfs: Refactor xfs_attr_set_shortform
xfs: Add xfs_attr_node_remove_name
xfs: Reverse apply 72b97ea40d
|
|
This patch renames the following functions to make the nameing scheme more consistent:
xfs_attr_shortform_remove -> xfs_attr_sf_removename
xfs_attr_node_remove_name -> xfs_attr_node_removename
xfs_attr_set_fmt -> xfs_attr_sf_addname
Suggested-by: Darrick J. Wong <[email protected]>
Signed-off-by: Allison Henderson <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
This ASSERT checks for the state value of RM_SHRINK in the set path
which should never happen. Change to ASSERT(0);
Suggested-by: Darrick J. Wong <[email protected]>
Signed-off-by: Allison Henderson <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2
xfs: clean up incore inode walk functions
This ambitious series aims to cleans up redundant inode walk code in
xfs_icache.c, hide implementation details of the quotaoff dquot release
code, and eliminates indirect function calls from incore inode walks.
The first thing it does is to move all the code that quotaoff calls to
release dquots from all incore inodes into xfs_icache.c. Next, it
separates the goal of an inode walk from the actual radix tree tags that
may or may not be involved and drops the kludgy XFS_ICI_NO_TAG thing.
Finally, we split the speculative preallocation (blockgc) and quotaoff
dquot release code paths into separate functions so that we can keep the
implementations cohesive.
Christoph suggested last cycle that we 'simply' change quotaoff not to
allow deactivating quota entirely, but as these cleanups are to enable
one major change in behavior (deferred inode inactivation) I do not want
to add a second behavior change (quotaoff) as a dependency.
To be blunt: Additional cleanups are not in scope for this series.
Next, I made two observations about incore inode radix tree walks --
since there's a 1:1 mapping between the walk goal and the per-inode
processing function passed in, we can use the goal to make a direct call
to the processing function. Furthermore, the only caller to supply a
nonzero iter_flags argument is quotaoff, and there's only one INEW flag.
From that observation, I concluded that it's quite possible to remove
two parameters from the xfs_inode_walk* function signatures -- the
iter_flags, and the execute function pointer. The middle of the series
moves the INEW functionality into the one piece (quotaoff) that wants
it, and removes the indirect calls.
The final observation is that the inode reclaim walk loop is now almost
the same as xfs_inode_walk, so it's silly to maintain two copies. Merge
the reclaim loop code into xfs_inode_walk.
Lastly, refactor the per-ag radix tagging functions since there's
duplicated code that can be consolidated.
This series is a prerequisite for the next two patchsets, since deferred
inode inactivation will add another inode radix tree tag and iterator
function to xfs_inode_walk.
v2: walk the vfs inode list when running quotaoff instead of the radix
tree, then rework the (now completely internal) inode walk function
to take the tag as the main parameter.
v3: merge the reclaim loop into xfs_inode_walk, then consolidate the
radix tree tagging functions
v4: rebase to 5.13-rc4
v5: combine with the quotaoff patchset, reorder functions to minimize
forward declarations, split inode walk goals from radix tree tags
to reduce conceptual confusion
v6: start moving the inode cache code towards the xfs_icwalk prefix
* tag 'inode-walk-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: refactor per-AG inode tagging functions
xfs: merge xfs_reclaim_inodes_ag into xfs_inode_walk_ag
xfs: pass struct xfs_eofblocks to the inode scan callback
xfs: fix radix tree tag signs
xfs: make the icwalk processing functions clean up the grab state
xfs: clean up inode state flag tests in xfs_blockgc_igrab
xfs: remove indirect calls from xfs_inode_walk{,_ag}
xfs: remove iter_flags parameter from xfs_inode_walk_*
xfs: move xfs_inew_wait call into xfs_dqrele_inode
xfs: separate the dqrele_all inode grab logic from xfs_inode_walk_ag_grab
xfs: pass the goal of the incore inode walk to xfs_inode_walk()
xfs: rename xfs_inode_walk functions to xfs_icwalk
xfs: move the inode walk functions further down
xfs: detach inode dquots at the end of inactivation
xfs: move the quotaoff dqrele inode walk into xfs_icache.c
[djwong: added variable names to function declarations while fixing
merge conflicts]
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2
xfs: assorted fixes for 5.14, part 1
This branch contains the first round of various small fixes for 5.14.
* tag 'assorted-fixes-5.14-1_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: don't take a spinlock unconditionally in the DIO fastpath
xfs: mark xfs_bmap_set_attrforkoff static
xfs: Remove redundant assignment to busy
xfs: sort variable alphabetically to avoid repeated declaration
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2
xfs: various unit conversions
Crafting the realtime file extent size hint fixes revealed various
opportunities to clean up unit conversions, so now that gets its own
series.
* tag 'unit-conversion-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: remove unnecessary shifts
xfs: clean up open-coded fs block unit conversions
|
|
From: Dave Chinner <[email protected]>
Stephen Rothwell reported this compiler warning from linux-next:
fs/xfs/libxfs/xfs_ialloc.c: In function 'xfs_difree_finobt':
fs/xfs/libxfs/xfs_ialloc.c:2032:20: warning: unused variable 'agi' [-Wunused-variable]
2032 | struct xfs_agi *agi = agbp->b_addr;
Which is fallout from agno -> perag conversions that were done in
this function. xfs_check_agi_freecount() is the only user of "agi"
in xfs_difree_finobt() now, and it only uses the agi to get the
current free inode count. We hold that in the perag structure, so
there's not need to directly reference the raw AGI to get this
information.
The btree cursor being passed to xfs_check_agi_freecount() has a
reference to the perag being operated on, so use that directly in
xfs_check_agi_freecount() rather than passing an AGI.
Fixes: 7b13c5155182 ("xfs: use perag for ialloc btree cursors")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Carlos Maiolino <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2
xfs: initial agnumber -> perag conversions for shrink
If we want to use active references to the perag to be able to gate
shrink removing AGs and hence perags safely, we've got a fair bit of
work to do actually use perags in all the places we need to.
There's a lot of code that iterates ag numbers and then
looks up perags from that, often multiple times for the same perag
in the one operation. If we want to use reference counted perags for
access control, then we need to convert all these uses to perag
iterators, not agno iterators.
[Patches 1-4]
The first step of this is consolidating all the perag management -
init, free, get, put, etc into a common location. THis is spread all
over the place right now, so move it all into libxfs/xfs_ag.[ch].
This does expose kernel only bits of the perag to libxfs and hence
userspace, so the structures and code is rearranged to minimise the
number of ifdefs that need to be added to the userspace codebase.
The perag iterator in xfs_icache.c is promoted to a first class API
and expanded to the needs of the code as required.
[Patches 5-10]
These are the first basic perag iterator conversions and changes to
pass the perag down the stack from those iterators where
appropriate. A lot of this is obvious, simple changes, though in
some places we stop passing the perag down the stack because the
code enters into an as yet unconverted subsystem that still uses raw
AGs.
[Patches 11-16]
These replace the agno passed in the btree cursor for per-ag btree
operations with a perag that is passed to the cursor init function.
The cursor takes it's own reference to the perag, and the reference
is dropped when the cursor is deleted. Hence we get reference
coverage for the entire time the cursor is active, even if the code
that initialised the cursor drops it's reference before the cursor
or any of it's children (duplicates) have been deleted.
The first patch adds the perag infrastructure for the cursor, the
next four patches convert a btree cursor at a time, and the last
removes the agno from the cursor once it is unused.
[Patches 17-21]
These patches are a demonstration of the simplifications and
cleanups that come from plumbing the perag through interfaces that
select and then operate on a specific AG. In this case the inode
allocation algorithm does up to three walks across all AGs before it
either allocates an inode or fails. Two of these walks are purely
just to select the AG, and even then it doesn't guarantee inode
allocation success so there's a third walk if the selected AG
allocation fails.
These patches collapse the selection and allocation into a single
loop, simplifies the error handling because xfs_dir_ialloc() always
returns ENOSPC if no AG was selected for inode allocation or we fail
to allocate an inode in any AG, gets rid of xfs_dir_ialloc()
wrapper, converts inode allocation to run entirely from a single
perag instance, and then factors xfs_dialloc() into a much, much
simpler loop which is easy to understand.
Hence we end up with the same inode allocation logic, but it only
needs two complete iterations at worst, makes AG selection and
allocation atomic w.r.t. shrink and chops out out over 100 lines of
code from this hot code path.
[Patch 22]
Converts the unlink path to pass perags through it.
There's more conversion work to be done, but this patchset gets
through a large chunk of it in one hit. Most of the iterators are
converted, so once this is solidified we can move on to converting
these to active references for being able to free perags while the
fs is still active.
* tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (23 commits)
xfs: remove xfs_perag_t
xfs: use perag through unlink processing
xfs: clean up and simplify xfs_dialloc()
xfs: inode allocation can use a single perag instance
xfs: get rid of xfs_dir_ialloc()
xfs: collapse AG selection for inode allocation
xfs: simplify xfs_dialloc_select_ag() return values
xfs: remove agno from btree cursor
xfs: use perag for ialloc btree cursors
xfs: convert allocbt cursors to use perags
xfs: convert refcount btree cursor to use perags
xfs: convert rmap btree cursor to using a perag
xfs: add a perag to the btree cursor
xfs: pass perags around in fsmap data dev functions
xfs: push perags through the ag reservation callouts
xfs: pass perags through to the busy extent code
xfs: convert secondary superblock walk to use perags
xfs: convert xfs_iwalk to use perag references
xfs: convert raw ag walks to use for_each_perag
xfs: make for_each_perag... a first class citizen
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2
xfs: buffer cache bulk page allocation
This patchset makes use of the new bulk page allocation interface to
reduce the overhead of allocating large numbers of pages in a
loop.
The first two patches are refactoring buffer memory allocation and
converting the uncached buffer path to use the same page allocation
path, followed by converting the page allocation path to use bulk
allocation.
The rest of the patches are then consolidation of the page
allocation and freeing code to simplify the code and remove a chunk
of unnecessary abstraction. This is largely based on a series of
changes made by Christoph Hellwig.
* tag 'xfs-buf-bulk-alloc-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: merge xfs_buf_allocate_memory
xfs: cleanup error handling in xfs_buf_get_map
xfs: get rid of xb_to_gfp()
xfs: simplify the b_page_count calculation
xfs: remove ->b_offset handling for page backed buffers
xfs: move page freeing into _xfs_buf_free_pages()
xfs: merge _xfs_buf_get_pages()
xfs: use alloc_pages_bulk_array() for buffers
xfs: use xfs_buf_alloc_pages for uncached buffers
xfs: split up xfs_buf_allocate_memory
|
|
Radix tree tags are supposed to be unsigned ints, so fix the callers.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
|
|
xfs_bmap_set_attrforkoff is only used inside of xfs_bmap.c, so mark it
static.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
Variable busy is set to false, but this value is never read as it is
overwritten or not used later on, hence it is a redundant assignment
and can be removed.
Clean up the following clang-analyzer warning:
fs/xfs/libxfs/xfs_alloc.c:1679:2: warning: Value stored to 'busy' is
never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
Variable 'xfs_agf_buf_ops', 'xfs_agi_buf_ops', 'xfs_dquot_buf_ops' and
'xfs_symlink_buf_ops' are declared twice, so sort these variables
alphabetically and remove the repeated declaration.
Cc: "Darrick J. Wong" <[email protected]>
Signed-off-by: Shaokun Zhang <[email protected]>
Reviewed-by: Carlos Maiolino <[email protected]
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
Almost unused, gets rid of another typedef.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Unlinked lists are held in the perag, and freeing of inodes needs to
be passed a perag, too, so look up the perag early in the unlink
processing and use it throughout.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
|
|
Because it's a mess.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Now that we've internalised the two-phase inode allocation, we can
now easily make the AG selection and allocation atomic from the
perspective of a single perag context. This will ensure AGs going
offline/away cannot occur between the selection and allocation
steps.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
This is just a simple wrapper around the per-ag inode allocation
that doesn't need to exist. The internal mechanism to select and
allocate within an AG does not need to be exposed outside
xfs_ialloc.c, and it being exposed simply makes it harder to follow
the code and simplify it.
This is simplified by internalising xf_dialloc_select_ag() and
xfs_dialloc_ag() into a single xfs_dialloc() function and then
xfs_dir_ialloc() can go away.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
xfs_dialloc_select_ag() does a lot of repetitive work. It first
calls xfs_ialloc_ag_select() to select the AG to start allocation
attempts in, which can do up to two entire loops across the perags
that inodes can be allocated in. This is simply checking if there is
spce available to allocate inodes in an AG, and it returns when it
finds the first candidate AG.
xfs_dialloc_select_ag() then does it's own iterative walk across
all the perags locking the AGIs and trying to allocate inodes from
the locked AG. It also doesn't limit the search to mp->m_maxagi,
so it will walk all AGs whether they can allocate inodes or not.
Hence if we are really low on inodes, we could do almost 3 entire
walks across the whole perag range before we find an allocation
group we can allocate inodes in or report ENOSPC.
Because xfs_ialloc_ag_select() returns on the first candidate AG it
finds, we can simply do these checks directly in
xfs_dialloc_select_ag() before we lock and try to allocate inodes.
This reduces the inode allocation pass down to 2 perag sweeps at
most - one for aligned inode cluster allocation and if we can't
allocate full, aligned inode clusters anywhere we'll do another pass
trying to do sparse inode cluster allocation.
This also removes a big chunk of duplicate code.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
The only caller of xfs_dialloc_select_ag() will always return
-ENOSPC to it's caller if the agbp returned from
xfs_dialloc_select_ag() is NULL. IOWs, failure to find a candidate
AGI we can allocate inodes from is always an ENOSPC condition, so
move this logic up into xfs_dialloc_select_ag() so we can simplify
the return logic in this function.
xfs_dialloc_select_ag() now only ever returns 0 with a locked
agbp, or an error with no agbp.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Now that everything passes a perag, the agno is not needed anymore.
Convert all the users to use pag->pag_agno instead and remove the
agno from the cursor. This was largely done as an automated search
and replace.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Which will eventually completely replace the agno in it.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
|
|
Needs a [from, to] ranged AG walk, and the perag to be stuffed into
the info structure for callouts to use.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
We currently pass an agno from the AG reservation functions to the
individual feature accounting functions, which in future may have to
do perag lookups to access per-AG state. Instead, pre-emptively
plumb the perag through from the highest AG reservation layer to the
feature callouts so they won't have to look it up again.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
|
|
All of the callers of the busy extent API either have perag
references available to use so we can pass a perag to the busy
extent functions rather than having them have to do unnecessary
lookups.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Clean up the last external manual AG walk.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Rather than manually walking the ags and passing agnunbers around,
pass the perag for the AG we are currently working on around in the
iwalk structure.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Convert the raw walks to an iterator, pulling the current AG out of
pag->pag_agno instead of the loop iterator variable.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
for_each_perag_tag() is defined in xfs_icache.c for local use.
Promote this to xfs_ag.h and define equivalent iteration functions
so that we can use them to iterate AGs instead to replace open coded
perag walks and perag lookups.
We also convert as many of the straight forward open coded AG walks
to use these iterators as possible. Anything that is not a direct
conversion to an iterator is ignored and will be updated in future
commits.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Move the xfs_perag infrastructure to the libxfs files that contain
all the per AG infrastructure. This helps set up for passing perags
around all the code instead of bare agnos with minimal extra
includes for existing files.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
They are AG functions, not superblock functions, so move them to the
appropriate location.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
Replace some open-coded fs block unit conversions with the standard
conversion macro.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Carlos Maiolino <[email protected]>
|
|
We can use the helper function xfs_attr_node_remove_name to reduce
duplicate code in this function
Signed-off-by: Allison Henderson <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
This function is no longer used, so it is safe to remove
Signed-off-by: Allison Henderson <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
|
|
This patch modifies the attr set routines to be delay ready. This means
they no longer roll or commit transactions, but instead return -EAGAIN
to have the calling routine roll and refresh the transaction. In this
series, xfs_attr_set_args has become xfs_attr_set_iter, which uses a
state machine like switch to keep track of where it was when EAGAIN was
returned. See xfs_attr.h for a more detailed diagram of the states.
Two new helper functions have been added: xfs_attr_rmtval_find_space and
xfs_attr_rmtval_set_blk. They provide a subset of logic similar to
xfs_attr_rmtval_set, but they store the current block in the delay attr
context to allow the caller to roll the transaction between allocations.
This helps to simplify and consolidate code used by
xfs_attr_leaf_addname and xfs_attr_node_addname. xfs_attr_set_args has
now become a simple loop to refresh the transaction until the operation
is completed. Lastly, xfs_attr_rmtval_remove is no longer used, and is
removed.
Signed-off-by: Allison Henderson <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
|