| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Cleanup semaphore.h
Signed-off-by: Dave Young <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Node addition failure is detected by testing return value of
sysfs_addfm_finish() which returns the number of added and removed
nodes. As the function is called as the last step of addition right
on top of error handling block, the if blocks looked like the
following.
if (sysfs_addrm_finish(&acxt))
success handling, usually return;
/* fall through to error handling */
This is the opposite of usual convention in sysfs and makes the code
difficult to understand. This patch inverts the test and makes those
blocks look more like others.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Gabriel C <[email protected]>
Cc: Miles Lane <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is a subtle bug in sysfs_create_link() failure path. When
symlink creation fails because there's already a node with the same
name, the target sysfs_dirent is put twice - once by failure path of
sysfs_create_link() and once more when the symlink is released.
Fix it by making only the symlink node responsible for putting
target_sd.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Gabriel C <[email protected]>
Cc: Miles Lane <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The original add/remove code had the following problems.
* parent's timestamps are updated on dentry instantiation. this is
incorrect with reclaimable files.
* updating parent's timestamps isn't synchronized.
* parent nlink update assumes the inode is accessible which won't be
true once directory dentries are made reclaimable.
This patch restructures add/remove paths to resolve the above
problems. Add/removal are done in the following steps.
1. sysfs_addrm_start() : acquire locks including sysfs_mutex and other
resources.
2-a. sysfs_add_one() : add new sd. linking the new sd into the
children list is caller's responsibility.
2-b. sysfs_remove_one() : remove a sd. unlinking the sd from the
children list is caller's responsibility.
3. sysfs_addrm_finish() : release all resources and clean up.
Steps 2-a and/or 2-b can be repeated multiple times.
Parent's inode is looked up during sysfs_addrm_start(). If available
(always at the moment), it's pinned and nlink is updated as sd's are
added and removed. Timestamps are updated during finish if any sd has
been added or removed. If parent's inode is not available during
start, sysfs_mutex ensures that parent inode is not created till
add/remove is complete.
All the complexity is contained inside the helper functions.
Especially, dentry/inode handling is properly hidden from the rest of
sysfs which now mostly operate on sysfs_dirents. As an added bonus,
codes which use these helpers to add and remove sysfs_dirents are now
more structured and simpler.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As kobj sysfs dentries and inodes are gonna be made reclaimable,
i_mutex can't be used to protect sysfs_dirent tree. Use sysfs_mutex
globally instead. As the whole tree is protected with sysfs_mutex,
there is no reason to keep sysfs_rename_sem. Drop it.
While at it, add docbook comments to functions which require
sysfs_mutex locking.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Replace sysfs_lock and kobj_sysfs_assoc_lock with sysfs_assoc_lock.
sysfs_lock was originally to be used to protect sysfs_dirent tree but
mutex seems better choice, so there is no reason to keep sysfs_lock
separate. Merge the two spinlocks into one.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As kobj sysfs dentries and inodes are gonna be made reclaimable,
dentry can't be used as naming token for sysfs file/directory, replace
kobj->dentry with kobj->sd. The only external interface change is
shadow directory handling. All other changes are contained in kobj
and sysfs.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Implement sysfs_find_dirent() and sysfs_get_dirent().
sysfs_dirent_exist() is replaced by sysfs_find_dirent(). These will
be used to make directory entries reclamiable.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
sysfs symlink is implemented by referencing dentry and kobject from
sysfs_dirent - symlink entry references kobject, dentry is used to
walk the tree. This complicates object lifetimes rules and is
dangerous - for example, there is no way to tell to which module the
target of a symlink belongs and referencing that kobject can make it
linger after the module is gone.
This patch reimplements symlink using only sysfs_dirent tree. sd for
a symlink points and holds reference to the target sysfs_dirent and
all walking is done using sysfs_dirent tree. Simpler and safer.
Please read the following message for more info.
http://article.gmane.org/gmane.linux.kernel/510293
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Make sd->s_element a union of sysfs_elem_{dir|symlink|attr|bin_attr}
and rename it to s_elem. This is to achieve...
* some level of type checking : changing symlink to point to
sysfs_dirent instead of kobject is much safer and less painful now.
* easier / standardized dereferencing
* allow sysfs_elem_* to contain more than one entry
Where possible, pointer is obtained by directly deferencing from sd
instead of going through other entities. This reduces dependencies to
dentry, inode and kobject. to_attr() and to_bin_attr() are unused now
and removed.
This is in preparation of object reference simplification.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add s_name to sysfs_dirent. This is to further reduce dependency to
the associated dentry. Name is copied for directories and symlinks
but not for attributes.
Where possible, name dereferences are converted to use sd->s_name.
sysfs_symlink->link_name and sysfs_get_name() are unused now and
removed.
This change allows symlink to be implemented using sysfs_dirent tree
proper, which is the last remaining dentry-dependent sysfs walk.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Currently there are four functions to create sysfs_dirent -
__sysfs_new_dirent(), sysfs_new_dirent(), __sysfs_make_dirent() and
sysfs_make_dirent(). Other than sysfs_make_dirent(), no function has
two users if calls to implement other functions are excluded.
This patch consolidates sysfs_dirent creation functions into the
following two.
* sysfs_new_dirent() : allocate and initialize
* sysfs_attach_dirent() : attach to sysfs_dirent hierarchy and/or
associate with dentry
This simplifies interface and gives callers more flexibility. This is
in preparation of object reference simplification.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Flatten cleanup paths in sysfs_add_link() and create_dir() to improve
readability and ease further changes to these functions. This is in
preparation of object reference simplification.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch prevents a race between IO and removing a file from sysfs.
It introduces a list of sysfs_buffers associated with a file at the inode.
Upon removal of a file the list is walked and the buffers marked orphaned.
IO to orphaned buffers fails with -ENODEV. The driver can safely free
associated data structures or be unloaded.
Signed-off-by: Oliver Neukum <[email protected]>
Acked-by: Maneesh Soni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This is needed to make the compatible link for /sys/block in the future.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As pointed out by Oliver Neukum.
Cc: Maneesh Soni <[email protected]>
Cc: Oliver Neukum <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The following patch checks for existing sysfs_dirent before
preparing new one while creating sysfs directories and files.
Signed-off-by: Maneesh Soni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.
Modified-by: Ingo Molnar <[email protected]>
(finished the conversion)
Signed-off-by: Jes Sorensen <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This bug could cause oopses and page state corruption, because ncpfs
used the generic page-cache symlink handlign functions. But those
functions only work if the page cache is guaranteed to be "stable", ie a
page that was installed when the symlink walk was started has to still
be installed in the page cache at the end of the walk.
We could have fixed ncpfs to not use the generic helper routines, but it
is in many ways much cleaner to instead improve on the symlink walking
helper routines so that they don't require that absolute stability.
We do this by allowing "follow_link()" to return a error-pointer as a
cookie, which is fed back to the cleanup "put_link()" routine. This
also simplifies NFS symlink handling.
Signed-off-by: Linus Torvalds <[email protected]>
|
|
sysfs: make sysfs_{create|remove}_link to take const char * name.
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|