| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use devm_add_action_or_reset() to clean up the bus data at
driver removal or when an error occurs during probe.
This will allow us to use other devres-based APIs later.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
To force a write barrier on the device memory, we write to the
SOFTWARE_FLAGS_SPR33 register, but this particular register was
selected because it was one of the writable and unused register.
Since a write barrier should also work if we use the read-only
register, switch to VF_CAP_REG register that is also marked as
accessible for VFs.
While at it, add simple kernel-doc for xe_device_wmb() function.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There is no real benefit to maintain a separate file. The register
definitions related to SR-IOV can be placed in existing headers.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Swap XEHP_CLOCK_GATE_DIS(0x101014) with GU_DEBUG(x101018).
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add a debug print that tells us if LPM is not getting enabled because the
port is external.
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
The ata_sas_port_alloc() wrapper mainly exists in order to export the
internal libata function which it wraps. The secondary reason is that
it initializes some ata_port struct members.
However, ata_sas_port_alloc() is only used in a single location,
sas_ata_init(), which already performs some ata_port struct member
initialization, so it does not make sense to spread this initialization
out over two separate locations.
Thus, remove the wrapper and instead export the libata function directly,
and move the libsas specific ata_port initialization to sas_ata_init(),
which already does some ata_port initialization.
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Currently, the ata_port print_ids are increased indefinitely, even when
there are lower ids available.
E.g. on first boot you will have ata1-ata6 assigned.
After a rmmod + modprobe, you will instead have ata7-ata12 assigned.
Move to use the ida_alloc() API, such that print_ids will get reused.
This means that even after a rmmod + modprobe, the ports will be assigned
print_ids ata1-ata6.
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
While the assignment of ap->print_id could have been moved to
ata_host_alloc(), let's simply move it to ata_port_alloc().
If you allocate a port, you want to give it a unique name that can be used
for printing.
By moving the ap->print_id assignment to ata_port_alloc(), means that we
can also remove the ap->print_id assignment from ata_sas_port_alloc().
This will allow a LLD to use the ata_port_*() print functions before
ata_host_register() has been called.
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
ap->local_port_no is simply ap->port_no + 1.
Since ap->local_port_no can be derived from ap->port_no, there is no need
for the ap->local_port_no struct member, so remove ap->local_port_no.
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
ata_sas_port_alloc() calls ata_port_alloc() which already assigns ap->lock
so there is no need for ata_sas_port_alloc() to assign it again.
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Commit f31871951b38 ("libata: separate out ata_host_alloc() and
ata_host_register()") added ata_host_alloc(), where the API allowed
a LLD to overallocate the number of ports supplied to ata_host_alloc(),
as long as the LLD decreased host->n_ports before calling
ata_host_register().
However, this functionally has never ever been used by a single LLD.
Because of the current API design, the assignment of ap->print_id is
deferred until registration time, which is bad, because that means that
the ata_port_*() print functions cannot be used by a LLD until after
registration time, which means that a LLD is forced to use a print
function that is non-port specific, even for a port specific error.
Remove the support for decreasing the number of ports, such that it will
be possible to assign ap->print_id earlier.
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
The ata_sas_tport_add() and ata_sas_tport_delete() wrappers only exist in
order to export the internal libata functions which they wrap.
Remove the wrappers and instead export the libata functions directly.
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Pull in bug fixes.
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
|
|
A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.
The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4f82ac6102788112e599a6074d2c1f2afce923df)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Don't call drm_suballoc_free with sa_bo pointing to PTR_ERR.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2120
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: <[email protected]> # v6.8+
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ce6b63336f79ec5f3996de65f452330e395f99ae)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The x1e80100, being a compute platform, provides functionality for the
exact same power supplies as sc8280xp. Add the compatible and assign
the sc8280xp match data.
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/20240621-x1e80100-power-supply-qcom-battmgr-v1-1-40cb89a0c144@linaro.org
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
If a queue is already assigned to the hardware, then a newly submitted
job can start straight away without waiting for the tick. However in
this case the devfreq infrastructure isn't notified that the GPU is
busy. By the time the tick happens the job might well have finished and
no time will be accounted for the GPU being busy.
Fix this by recording the GPU as busy directly in queue_run_job() in the
case where there is a CSG assigned and therefore we just ring the
doorbell.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Steven Price <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The MAX17201 monitors a single cell pack. The MAX17205 monitors and
balances a 2S or 3S pack or monitors a multiple-series cell pack. Both
devices use a I2C interface.
Signed-off-by: Dimitri Fedrau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
No functional changes intended.
Signed-off-by: Zhu Yanjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Unlike T2 Macs with Butterfly keyboard, who have their keyboard backlight
on the USB device the T2 Macs with Magic keyboard have their backlight on
the Touchbar backlight device (05ac:8102).
Support for Butterfly keyboards has already been added in
commit 9018eacbe623 ("HID: apple: Add support for keyboard backlight on
certain T2 Macs.") This patch adds support for the Magic keyboards.
Signed-off-by: Orlando Chamberlain <[email protected]>
Co-developed-by: Aditya Garg <[email protected]>
Signed-off-by: Aditya Garg <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Use the extended irq_sim interface to supply the simulated interrupt
domain with callbacks allowing the GPIO sim to lock/unlock GPIOs
requested as interrupts.
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Bos can be put with multiple unrelated dma-resv locks held. But
imported bos attempt to grab the bo dma-resv during dma-buf detach
that typically happens during cleanup. That leads to lockde splats
similar to the below and a potential ABBA deadlock.
Fix this by always taking the delayed workqueue cleanup path for
imported bos.
Requesting stable fixes from when the Xe driver was introduced,
since its usage of drm_exec and wide vm dma_resvs appear to be
the first reliable trigger of this.
[22982.116427] ============================================
[22982.116428] WARNING: possible recursive locking detected
[22982.116429] 6.10.0-rc2+ #10 Tainted: G U W
[22982.116430] --------------------------------------------
[22982.116430] glxgears:sh0/5785 is trying to acquire lock:
[22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0
[22982.116438]
but task is already holding lock:
[22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116442]
other info that might help us debug this:
[22982.116442] Possible unsafe locking scenario:
[22982.116443] CPU0
[22982.116444] ----
[22982.116444] lock(reservation_ww_class_mutex);
[22982.116445] lock(reservation_ww_class_mutex);
[22982.116447]
*** DEADLOCK ***
[22982.116447] May be due to missing lock nesting notation
[22982.116448] 5 locks held by glxgears:sh0/5785:
[22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe]
[22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe]
[22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe]
[22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe]
[22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116719]
stack backtrace:
[22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ #10
[22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[22982.116723] Call Trace:
[22982.116724] <TASK>
[22982.116725] dump_stack_lvl+0x77/0xb0
[22982.116727] __lock_acquire+0x1232/0x2160
[22982.116730] lock_acquire+0xcb/0x2d0
[22982.116732] ? dma_buf_detach+0x3b/0xf0
[22982.116734] ? __lock_acquire+0x417/0x2160
[22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0
[22982.116738] ? dma_buf_detach+0x3b/0xf0
[22982.116741] ? dma_buf_detach+0x3b/0xf0
[22982.116743] ? ww_mutex_lock+0x2b/0x90
[22982.116745] ww_mutex_lock+0x2b/0x90
[22982.116747] dma_buf_detach+0x3b/0xf0
[22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm]
[22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe]
[22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290
[22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec]
[22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec]
[22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe]
[22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe]
[22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe]
[22982.117025] ? xa_find+0xe3/0x1e0
[22982.117028] xe_file_close+0x10a/0x1c0 [xe]
[22982.117074] drm_file_free+0x22a/0x280 [drm]
[22982.117099] drm_release_noglobal+0x22/0x70 [drm]
[22982.117119] __fput+0xf1/0x2d0
[22982.117122] task_work_run+0x59/0x90
[22982.117125] do_exit+0x330/0xb40
[22982.117127] do_group_exit+0x36/0xa0
[22982.117129] get_signal+0xbd2/0xbe0
[22982.117131] arch_do_signal_or_restart+0x3e/0x240
[22982.117134] syscall_exit_to_user_mode+0x1e7/0x290
[22982.117137] do_syscall_64+0xa1/0x180
[22982.117139] ? lock_acquire+0xcb/0x2d0
[22982.117140] ? __set_task_comm+0x28/0x1e0
[22982.117141] ? find_held_lock+0x2b/0x80
[22982.117144] ? __set_task_comm+0xe1/0x1e0
[22982.117145] ? lock_release+0xca/0x290
[22982.117147] ? __do_sys_prctl+0x245/0xab0
[22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190
[22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290
[22982.117152] ? do_syscall_64+0xa1/0x180
[22982.117154] ? __lock_acquire+0x417/0x2160
[22982.117155] ? reacquire_held_locks+0xd1/0x1f0
[22982.117156] ? do_user_addr_fault+0x30c/0x790
[22982.117158] ? lock_acquire+0xcb/0x2d0
[22982.117160] ? find_held_lock+0x2b/0x80
[22982.117162] ? do_user_addr_fault+0x357/0x790
[22982.117163] ? lock_release+0xca/0x290
[22982.117164] ? do_user_addr_fault+0x361/0x790
[22982.117166] ? trace_hardirqs_off+0x4b/0xc0
[22982.117168] ? clear_bhb_loop+0x45/0xa0
[22982.117170] ? clear_bhb_loop+0x45/0xa0
[22982.117172] ? clear_bhb_loop+0x45/0xa0
[22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[22982.117176] RIP: 0033:0x7f943d267169
[22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f.
[22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
[22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169
[22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0
[22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff
[22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0
[22982.117202] </TASK>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Christian König <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # v6.8+
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When handling an IO request, MD checks if a reshape is currently
happening, and if so, where the IO sector is in relation to the reshape
progress. MD uses conf->reshape_progress for both of these tasks. When
the reshape finishes, conf->reshape_progress is set to MaxSector. If
this occurs after MD checks if the reshape is currently happening but
before it calls ahead_of_reshape(), then ahead_of_reshape() will end up
comparing the IO sector against MaxSector. During a backwards reshape,
this will make MD think the IO sector is in the area not yet reshaped,
causing it to use the previous configuration, and map the IO to the
sector where that data was before the reshape.
This bug can be triggered by running the lvm2
lvconvert-raid-reshape-linear_to_raid6-single-type.sh test in a loop,
although it's very hard to reproduce.
Fix this by factoring the code that checks where the IO sector is in
relation to the reshape out to a helper called get_reshape_loc(),
which reads reshape_progress and reshape_safe while holding the
device_lock, and then rechecks if the reshape has finished before
calling ahead_of_reshape with the saved values.
Also use the helper during the REQ_NOWAIT check to see if the location
is inside of the reshape region.
Fixes: fef9c61fdfabf ("md/raid5: change reshape-progress measurement to cope with reshaping backwards.")
Signed-off-by: Benjamin Marzinski <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit 90f5f7ad4f38 ("md: Wait for md_check_recovery before attempting
device removal.") explained in the commit message that failed device
must be reomoved from the personality first by md_check_recovery(),
before it can be removed from the array. That's the reason the commit
add the code to wait for MD_RECOVERY_NEEDED.
However, this is not the case now, because remove_and_add_spares() is
called directly from hot_remove_disk() from ioctl path, hence failed
device(marked faulty) can be removed from the personality by ioctl.
On the other hand, the commit introduced a performance problem that
if MD_RECOVERY_NEEDED is set and the array is not running, ioctl will
wait for 5s before it can return failure to user.
Since the waiting is not needed now, fix the problem by removing the
waiting.
Fixes: 90f5f7ad4f38 ("md: Wait for md_check_recovery before attempting device removal.")
Reported-by: Mateusz Kusiak <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Yu Kuai <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
'struct md_cluster_operations' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
51941 1442 80 53463 d0d7 drivers/md/md-cluster.o
After:
=====
text data bss dec hex filename
52133 1246 80 53459 d0d3 drivers/md/md-cluster.o
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/3727f3ce9693cae4e62ae6778ea13971df805479.1719173852.git.christophe.jaillet@wanadoo.fr
|
|
./drivers/md/md.c:630:21-22: Unneeded semicolon
Reported-by: Abaci Robot <[email protected]>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9344
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
As commit ad8606702f26 ("md/raid5: remove rcu protection to access rdev
from conf") explains, rcu protection can be removed, however, there are
three places left, there won't be any real problems.
drivers/md/raid5.c:8071:24: error: incompatible types in comparison expression (different address spaces):
drivers/md/raid5.c:8071:24: struct md_rdev [noderef] __rcu *
drivers/md/raid5.c:8071:24: struct md_rdev *
drivers/md/raid5.c:7569:25: error: incompatible types in comparison expression (different address spaces):
drivers/md/raid5.c:7569:25: struct md_rdev [noderef] __rcu *
drivers/md/raid5.c:7569:25: struct md_rdev *
drivers/md/raid5.c:7573:25: error: incompatible types in comparison expression (different address spaces):
drivers/md/raid5.c:7573:25: struct md_rdev [noderef] __rcu *
drivers/md/raid5.c:7573:25: struct md_rdev *
Fixes: ad8606702f26 ("md/raid5: remove rcu protection to access rdev from conf")
Cc: [email protected]
Signed-off-by: Yu Kuai <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add VM bind IOCTL error injection which steals MSB of the bind flags
field which if set injects errors at various points in the VM bind
IOCTL. Intended to validate error paths. Enabled by CONFIG_DRM_XE_DEBUG.
v4:
- Change define layout (Jonathan)
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Update PT layer so if a memory allocation for a PTE fails the error can
be propagated to the user without requiring the VM to be killed.
v5:
- change return value invalidation_fence_init to void (Matthew Auld)
v7:
- Invert i,j usage in two places (Matthew Auld)
- s/0/NULL (Matthew Auld)
- Don't ignore return value of xe_pt_new_shared (Matthew Auld)
- Don't check for NULL in xe_pt_entry (Matthew Auld)
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The trace events have changed moving to a single job per VM bind IOCTL,
update the trace events align with old behavior as much as possible.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This aligns with the uAPI of an array of binds or single bind that
results in multiple GPUVA ops to be considered a single atomic
operations.
The design is roughly:
- xe_vma_ops is a list of xe_vma_op (GPUVA op)
- each xe_vma_op resolves to 0-3 PT ops
- xe_vma_ops creates a single job
- if at any point during binding a failure occurs, xe_vma_ops contains
the information necessary unwind the PT and VMA (GPUVA) state
v2:
- add missing dma-resv slot reservation (CI, testing)
v4:
- Fix TLB invalidation (Paulo)
- Add missing xe_sched_job_last_fence_add/test_dep check (Inspection)
v5:
- Invert i, j usage (Matthew Auld)
- Add helper to test and add job dep (Matthew Auld)
- Return on anything but -ETIME for cpu bind (Matthew Auld)
- Return -ENOBUFS if suballoc of BB fails due to size (Matthew Auld)
- s/do/Do (Matthew Auld)
- Add missing comma (Matthew Auld)
- Do not assign return value to xe_range_fence_insert (Matthew Auld)
v6:
- s/0x1ff/MAX_PTE_PER_SDI (Matthew Auld, CI)
- Check to large of SA in Xe to avoid triggering WARN (Matthew Auld)
- Fix checkpatch issues
v7:
- Rebase
- Support more than 510 PTEs updates in a bind job (Paulo, mesa testing)
v8:
- Rebase
Cc: Thomas Hellström <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Helpful to determine if a bind can immediately use CPU or needs to be
deferred a drm scheduler job.
v7:
- Better wording in kernel doc (Matthew Auld)
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Each xe_vma_op resolves to 0-3 pt_ops. Add storage for the pt_ops to
xe_vma_ops which is dynamically allocated based the number and types of
xe_vma_op in the xe_vma_ops list. Allocation only implemented in this
patch.
This will help with converting xe_vma_ops (multiple xe_vma_op) in a
atomic update unit.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Engine is old nomenclature, replace with exec queue.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The name_assign_type indicates how the name is provided. Currently
these types are supported:
- RDMA_NAME_ASSIGN_TYPE_UNKNOWN: Unknown or not set;
- RDMA_NAME_ASSIGN_TYPE_USER: Name is provided by the user; The
user-created sub device, rxe and siw device has this type.
When filling nl device info, it is set in the new attribute
RDMA_NLDEV_ATTR_NAME_ASSIGN_TYPE. User-space tools like udev
"rdma_rename" could check this attribute to determine if this
device needs to be renamed or not.
Signed-off-by: Mark Zhang <[email protected]>
Link: https://lore.kernel.org/r/522591bef9a369cc8e5dcb77787e017bffee37fe.1719837610.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Reduce nodename string size to fit IB_DEVICE_NODE_DESC_MAX.
drivers/infiniband/hw/qib/qib_verbs.c: In function ‘qib_register_ib_device’:
drivers/infiniband/hw/qib/qib_verbs.c:1554:40: error: ‘%s’ directive output may be truncated writing up to 64 bytes into a region of size 43
[-Werror=format-truncation=]
1554 | "Intel Infiniband HCA %s", init_utsname()->nodename);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_verbs.c:1553:9: note: ‘snprintf’ output between 22 and 86 bytes into a destination of size 64
1553 | snprintf(ibdev->node_desc, sizeof(ibdev->node_desc),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1554 | "Intel Infiniband HCA %s", init_utsname()->nodename);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/1fb6393fa2e0702fef995834c3c7db972bbc4d06.1719837715.git.leon@kernel.org
Acked-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
drivers/infiniband/hw/qib/qib_init.c: In function ‘qib_init_one’:
drivers/infiniband/hw/qib/qib_init.c:586:67: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 3 [-Werror=format-truncation=]
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~
In function ‘qib_create_workqueues’,
inlined from ‘qib_init_one’ at drivers/infiniband/hw/qib/qib_init.c:1438:8:
drivers/infiniband/hw/qib/qib_init.c:586:60: note: directive argument in the range [-2147483643, 254]
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~~~~~~~~~
drivers/infiniband/hw/qib/qib_init.c:586:25: note: ‘snprintf’ output between 7 and 27 bytes into a destination of size 8
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
587 | dd->unit, pidx);
| ~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/ab5222c414a01e9d2c5129ef26836aace9ee2aa5.1719837715.git.leon@kernel.org
Acked-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
IOW, calling _test_bit() avoids potential compile-time optimizations.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc3b ("ice: read internal temperature sensor")
Acked-by: Ivan Vecera <[email protected]>
Reviewed-by: Alexander Lobakin <[email protected]>
Signed-off-by: Petr Oros <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <[email protected]>
Co-developed-by: Jacob Keller <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Milena Olech <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc1/0x5e0 mm/kasan/report.c:475
kasan_report+0xbe/0xf0 mm/kasan/report.c:588
strlen+0x7d/0xa0 lib/string.c:418
__fortify_strlen include/linux/fortify-string.h:210 [inline]
in4_pton+0xa3/0x3f0 net/core/utils.c:130
bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
__bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
__bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
dev_attr_store+0x54/0x80 drivers/base/core.c:2366
sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x96a/0xd80 fs/read_write.c:584
ksys_write+0x122/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---
Fix it by adding a check of string length before using it.
Fixes: f9de11a16594 ("bonding: add ip checks when store ip target")
Signed-off-by: Yue Sun <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Lockdep generates the following false positives with KMSAN on s390x:
[ 6.063666] DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())
[ ...]
[ 6.577050] Call Trace:
[ 6.619637] [<000000000690d2de>] check_flags+0x1fe/0x210
[ 6.665411] ([<000000000690d2da>] check_flags+0x1fa/0x210)
[ 6.707478] [<00000000006cec1a>] lock_acquire+0x2ca/0xce0
[ 6.749959] [<00000000069820ea>] _raw_spin_lock_irqsave+0xea/0x190
[ 6.794912] [<00000000041fc988>] __stack_depot_save+0x218/0x5b0
[ 6.838420] [<000000000197affe>] __msan_poison_alloca+0xfe/0x1a0
[ 6.882985] [<0000000007c5827c>] start_kernel+0x70c/0xd50
[ 6.927454] [<0000000000100036>] startup_continue+0x36/0x40
Between trace_hardirqs_on() and `stosm __mask, 3` lockdep thinks that
interrupts are on, but on the CPU they are still off. KMSAN
instrumentation takes spinlocks, giving lockdep a chance to see and
complain about this discrepancy.
KMSAN instrumentation is inserted in order to poison the __mask variable.
Disable instrumentation in the respective functions. They are very small
and it's easy to see that no important metadata updates are lost because
of this.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ilya Leoshkevich <[email protected]>
Reviewed-by: Alexander Potapenko <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu (Google) <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Steven Rostedt (Google) <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
when offlining
We currently have a hack for virtio-mem in place to handle memory
offlining with PageOffline pages for which we already adjusted the managed
page count.
Let's enlighten memory offlining code so we can get rid of that hack, and
document the situation.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Acked-by: Oscar Salvador <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dexuan Cui <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Eugenio Pérez <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: "K. Y. Srinivasan" <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Oleksandr Tyshchenko <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Wei Liu <[email protected]>
Cc: Xuan Zhuo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
instead of PageReserved()
We currently initialize the memmap such that PG_reserved is set and the
refcount of the page is 1. In virtio-mem code, we have to manually clear
that PG_reserved flag to make memory offlining with partially hotplugged
memory blocks possible: has_unmovable_pages() would otherwise bail out on
such pages.
We want to avoid PG_reserved where possible and move to typed pages
instead. Further, we want to further enlighten memory offlining code
about PG_offline: offline pages in an online memory section. One example
is handling managed page count adjustments in a cleaner way during memory
offlining.
So let's initialize the pages with PG_offline instead of PG_reserved.
generic_online_page()->__free_pages_core() will now clear that flag before
handing that memory to the buddy.
Note that the page refcount is still 1 and would forbid offlining of such
memory except when special care is take during GOING_OFFLINE as currently
only implemented by virtio-mem.
With this change, we can now get non-PageReserved() pages in the XEN
balloon list. From what I can tell, that can already happen via
decrease_reservation(), so that should be fine.
HV-balloon should not really observe a change: partial online memory
blocks still cannot get surprise-offlined, because the refcount of these
PageOffline() pages is 1.
Update virtio-mem, HV-balloon and XEN-balloon code to be aware that
hotplugged pages are now PageOffline() instead of PageReserved() before
they are handed over to the buddy.
We'll leave the ZONE_DEVICE case alone for now.
Note that self-hosted vmemmap pages will no longer be marked as
reserved. This matches ordinary vmemmap pages allocated from the buddy
during memory hotplug. Now, really only vmemmap pages allocated from
memblock during early boot will be marked reserved. Existing
PageReserved() checks seem to be handling all relevant cases correctly
even after this change.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Acked-by: Oscar Salvador <[email protected]> [generic memory-hotplug bits]
Cc: Alexander Potapenko <[email protected]>
Cc: Dexuan Cui <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Eugenio Pérez <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: "K. Y. Srinivasan" <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Oleksandr Tyshchenko <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Wei Liu <[email protected]>
Cc: Xuan Zhuo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There are no more users of page_mkclean(), remove it and update the
document and comment.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Replaces three calls to compound_head() with one, which removes last
caller of page_mkclean().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Let's clean it up: use a proper page type and store our data (offset into
a page) in the lower 16 bit as documented.
We won't be able to support 256 KiB base pages, which is acceptable.
Teach Kconfig to handle that cleanly using a new CONFIG_HAVE_ZSMALLOC.
Based on this, we should do a proper "struct zsdesc" conversion, as
proposed in [1].
This removes the last _mapcount/page_type offender.
[1] https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Tested-by: Sergey Senozhatsky <[email protected]> [zram/zsmalloc workloads]
Reviewed-by: Sergey Senozhatsky <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Minchan Kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|