| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The order in which lists are sorted in __thermal_zone_device_update()
is reverse with respect to what it should be due to a mistake in
thermal_trip_notify_cmp().
Fix it and observe that it is not necessary to sort the lists in
different orders. They can both be sorted in ascending order if
way_down_list is walked in reverse order which allows the code to
be slightly more straightforward (and less prone to silly mistakes).
Fixes: 7454f2c42cce ("thermal: core: Sort trip point crossing notifications by temperature")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.
In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: f6bc909e7673 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
AMC6821 supports configuring if a fan is DC or PWM controlled.
Add support for the pwm1_mode attribute to make it runtime configurable.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Convert to use with_info API to simplify the code and make it easier
to maintain. This also reduces code size by approximately 20%.
No functional change intended.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Use regmap for register accesses and caching.
While at it, use sysfs_emit() instead of sprintf() to write sysfs
attribute data, and remove spurious debug messages which would only
be seen as result of a bug in the code. Also make sure that error
codes are propagated and not replaced with -EIO.
While at it, introduce rounding of written temperature values and for
internal calculations to reduce deviation from written values and as
much as possible.
No functional change intended except for differences introduced by
rounding.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
The driver only supports a single chip, so an enum
to determine the chip type is unnecessary. Drop it.
No functional change intended.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Use BIT() and GENMASK() for bit and mask definitions
to help distinguish bit and mask definitions from other
defines and to make the code easier to read.
No functional change intended.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Using tabs for column alignment makes the code easier to read.
No functional change intended.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Reorder include files to alphabetic order to simplify maintenance,
and drop the unnecessary kernel.h include.
No functional change intended.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
After setting fan1_target and setting pwm1_enable to 4,
the fan controller tries to achieve the requested fan speed.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
The chip does not have a fan divisor. What it does have is a configuration
to set either 2 or 4 pulses per fan rotation. Rename the attribute to
reflect its use. Update documentation accordingly.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
The default value of the maximum fan speed limit register is 0,
essentially translating to an unlimited fan speed. When reading
the limit, a value of 0 is reported in this case. However, writing
a value of 0 results in writing a value of 0xffff into the register,
which is inconsistent.
To solve the problem, permit writing a limit of 0 for the maximim fan
speed, effectively translating to "no limit". Write 0 into the register
if a limit value of 0 is written. Otherwise limit the range to
<1..6000000> and write 1..0xffff into the register. This ensures that
reading and writing from and to a limit register return the same value
while at the same time not changing reported values when reading the
speed or limits.
While at it, restrict fan limit writes to non-negative numbers; writing
a negative limit does not make sense and should be reported instead of
being corrected.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
The pwm value range is well defined from 0..255. Don't accept any values
outside this range.
This changes the valid range of pwm1_auto_point2_pwm from 0..254 to 0..255,
meaning it can now be equivalent to not only pwm1_auto_point1_pwm (which is
always 0) but also to pwm1_auto_point3_pwm (which is always 255). While
that may not be practical, there seems to be no technical reason for
preventing a user from doing it.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.11
This introduces 11 new boards, namely:
* ASUS Vivobook S 15
* Lenovo Smart Tab M10 DTS
* Motorola Moto E 2015 LTE (surnia)
* Motorola Moto G 2015 (osprey)
* Motorola Moto G4 Play (harpia)
* Qualcomm AIM300 AIoT development board
* Qualcomm SM8650 Hardware Development Kit (HDK)
* SHIFTphone 8
* Samsung Galaxy Z Fold5
* Schneider HMIBSC board DTS
* TP-Link Archer AX55 v1
Of particular interest here is the Asus Vivobook, the first supported X1
Elite consumer laptop.
For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is
described.
The improvements to MSM8916-based devices continues, with sound and
mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter
also gaining BMS support. Samsung Galaxy devices gains PMIC and charger
definitions, NFC support and MUIC. Accelerometer and magnetometer
support is added to the Samsung Galaxy Grand Prime devices.
On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem,
and Adreno GPU are added.
On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are
added for the audio DSP, glink-edges are described where available, the
display subsystem reset is added.
Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to
allow ath10k to come up.
GPU support is added to QCM2290 and enabled on the RB1 development
board.
The I2C controller used for communicating with the LT9611UXC HDMI
bridge is temporarily replaced with i2c-gpio while issues with the
builtin controller is diagnosed. The same is done for RB2, on the
QRB4210 platform.
On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is
marked as always on to match expectations.
On the QDU1000 platform, USB is added, secure QFPROM is introduced to
allow LLCC to access OTP data. USB is enabled on the two IDP boards.
SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL
info regions. Nodes are marked as dma-coherent as needed, a dedicated
carveout for shared memory bridge allocations is introduced.
The SA8775P ride device is split in the two versions r2 and r3.
The SC7180 Trogdor clamshell/detachable fragments are refactored for
convenience, and pwmleds are disabled where unused.
On SC7280 the APR nodes for interfacing with the audio services in audio
DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to
enable improved debug support. QoS clocks are added to interconnects, as
needed in order to operate the QoS settings on some buses.
SuperSpeed in park is disabled for the primary DWC3 instance to address
host controller issues under load.
The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are
named for better output, and firmware name for IPA is adjusted to the
preferred file format.
The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are
enabled.
The Type-C port manager found in PM7250b is enabled, for targets not
using pmic-glink firmware for Type-C management.
SC8180X gets a number of smaller corrections, and some cleanups -
related to both functional issues and DeviceTree validation.
The PSHOLD node is marked reserved, after reports that this causes
issues during shutdown. Description of the USB signals are updated to
match the signal path. The PM8008 camera PMIC is added to Lenovo
ThinkPad X13s.
The PM660 PMIC is extended with charger and rradc definitions, and the
SDM670 gains a SMEM region definition.
On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved
debug output during faults etc. The UFS PHY is associated with its GDSC,
and the DisplayPort controller is wired up to the QMP PHY.
The Lenovo Yoga C630 Embedded Controller is introduced, adding battery
and Type-C port management and altmode support. The C630 also gains WiFI
calibration variant information, to cause selection of the right data.
The missing IPA firmware path is corrected.
For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and
SPI nodes are introduced. SD-card support is added to the IDP board.
CPUfreq support is introduced for the SM4450 platform.
Missing reset is added to the SDHC controller of SM6115. The UFS PHY
is associated with its GDSC, so is the PHY on SM6350.
On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are
named for more informative debug output, and USB role switching is
enabled.
On the Fairphone 3, vibrator support is added and enabled.
On SM8250, the USB signal paths are properly described in the OF graph,
the UFS PHY gains its required power-domains description.
Thanks to the introduction of PCI power sequence support, the QRB5165
RB5 WiFi chip can now be powered up, so this is added.
Touchscreen interrupt flags are corrected accross a number of Sony
Xperia devices, to remove the unexpected traces from downstream.
On SM8450 an OPP-table is introduced for the PCIe controllers, to
specify the bandwidth and performance state requirements for the
different genrations and link widths. For this the PCIe controllers also
gains interconnect path definitions. The LLCC register layout is
corrected, and the UFS PHY is associated with its GDSC.
On the SM8550 development boards speaker port mapping is added. WiFi
support is finally enabled on the QRD board.
The new AIM300 development platform/board is introduced.
For SM8650 video and camera clock controller are introduced. SCM node
gains details necessary to trigger USB ramdump (download mode) upon a
system crash.
WiFi support and speaker port mapping is added to the QRD and the newly
introduced HDK. On the MTP the USB Type-C connector is describe to be
routed to the PHY.
In addition to the base HDK, a Display Card overlay is also introduced.
For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe
6a instance are added. Thermal zones are described. Pmic-glink is
introduced for both CRD and QCP devices, and remaining PMICs are
described. Audio support is also added to the QCP.
An explicit, larger, chunk of CMA memory is added to the various
devices, in order to compensate for the lack of IOMMU for PCIe.
Across a wide range of platforms, the thermal zone polling delays are
removed as supplies are interrupt driven anyways. Also thermal related
is the introduction of GPU thermal throttling, across many SoCs.
The old SMSM implementation is finally transitioned to using the
mailbox-based description and implementation for invoking interrupts on
remote processors. As such interrupt-triggering is converted to use this
mechanism on related platforms.
The usb-role-switch property is removed for all USB instances hard coded
to either host or peripheral across a range of boards.
* tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (279 commits)
dt-bindings: arm: qcom: Document samsung,ms013g
arm64: dts: qcom: Add device tree for ASUS Vivobook S 15
dt-bindings: arm: qcom: Add ASUS Vivobook S 15
arm64: dts: qcom: qrb4210-rb2: Correct max current draw for VBUS
arm64: dts: qcom: msm8998: add venus node
arm64: dts: qcom: sa8775p-ride-r3: add new board file
arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi
dt-bindings: arm: qcom: add sa8775p-ride Rev 3
arm64: dts: qcom: sm8550-qrd: add port mapping to speakers
arm64: dts: qcom: sm8550-mtp: add port mapping to speakers
arm64: dts: qcom: sm8550-hdk: add port mapping to speakers
arm64: dts: qcom: sm8650-qrd: add port mapping to speakers
arm64: dts: qcom: sm8650-mtp: add port mapping to speakers
arm64: dts: qcom: sm8650-hdk: add port mapping to speakers
arm64: dts: qcom: sm7225-fairphone-fp4: Name the regulators
arm64: dts: qcom: pm8916: correct thermal zone name
arm64: dts: qcom: x1e80100: Add gpu support
arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply
arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
arm64: dts: qcom: sm6115: add resets for sdhc_1
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The drm_mode_legacy_fb_format() function only generates formats suitable
for little endian devices. switch to drm_driver_legacy_fb_format() here
instead to take the device endianness into consideration, too.
Suggested-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Fixes: 6ae2ff23aa43 ("drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()")
Cc: Geert Uytterhoeven <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Cc: Hamza Mahfooz <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: <[email protected]> # v6.7+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.10
UCSI support is disabled on SC8280XP while being debugged, as it's
causing the system to crash. A recent LLCC QDU1000 binding change is
reverted, to allow expressing the LLCC memory regions.
* tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
soc: qcom: pmic_glink: disable UCSI on sc8280xp
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Remove .owner field if calls are used which set it automatically.
./drivers/gpu/drm/stm/lvds.c:1213:3-8: No need to set .owner here. The core will do it.
Reported-by: Abaci Robot <[email protected]>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9457
Signed-off-by: Jiapeng Chong <[email protected]>
Acked-by: Raphael Gallais-Pou <[email protected]>
Signed-off-by: Philippe Cornu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In the process of adding support for shared IRQ pins, a scenario
was accidentally created where adv7511_irq_process returned
prematurely causing the EDID to fail randomly.
Since the interrupt handler is broken up into two main helper functions,
update both of them to treat the helper functions as IRQ handlers. These
IRQ routines process their respective tasks as before, but if they
determine that actual work was done, mark the respective IRQ status
accordingly, and delay the check until everything has been processed.
This should guarantee the helper functions don't return prematurely
while still returning proper values of either IRQ_HANDLED or IRQ_NONE.
Reported-by: Liu Ying <[email protected]>
Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
Signed-off-by: Adam Ford <[email protected]>
Tested-by: Liu Ying <[email protected]> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
V3: Remove unnecessary declaration of ret by evaluating the return
code of regmap_read directly.
V2: Fix uninitialized cec_status
Cut back a little on error handling to return either IRQ_NONE or
IRQ_HANDLED.
|
|
The eMMC RST_N register is implemented as secure register on the BlueField
SoC and controlled by TF-A. This commit sends an SMC call to TF-A for the
eMMC HW reset.
Reviewed-by: David Thompson <[email protected]>
Signed-off-by: Liming Sun <[email protected]>
Link: https://lore.kernel.org/r/2c459196c6867e325f9386ec0559efea464cfdd6.1718213918.git.limings@nvidia.com
Signed-off-by: Ulf Hansson <[email protected]>
|
|
This commit adds a new callback to allow drivers to support platform
specific eMMC HW reset.
Reviewed-by: David Thompson <[email protected]>
Signed-off-by: Liming Sun <[email protected]>
Link: https://lore.kernel.org/r/3df02ffa8bdaa74f5261c8914d2545b97fb3478a.1718213918.git.limings@nvidia.com
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Set proper MAC capabilities for port 4 on LAN9371 and LAN9372 switches with
integrated 100BaseTX PHY. And introduce the is_lan937x_tx_phy() function to
reuse it where applicable.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
status is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li zeming <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
rc is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li zeming <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The IRQ line might not be connected on some boards. Allow the driver
to be probed without it.
Signed-off-by: Frieder Schrempf <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The struct instances supplied by the drivers are never modified.
Handle them as const in the regmap core allowing the drivers to put them
into .rodata.
Also add a new entry to const_structs.checkpatch to make sure future
instances of this struct already enter the tree as const.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge more amd-pstate changes for 6.11 from Mario Liminciello:
"This adds fixes for setting scaling max frequency on systems
without a dedicated MSR for setting CPPC requests."
* tag 'amd-pstate-v6.11-2024-07-07' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
|
|
`sdhci_am654_regmap_config` is not modified and can be declared as const
to move its data to a read-only section.
Signed-off-by: Javier Carrasco <[email protected]>
Link: https://lore.kernel.org/r/20240705-sdhci_am654-const-regmap_config-v1-1-c166a8d48a66@gmail.com
Signed-off-by: Ulf Hansson <[email protected]>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts drivers/mmc/* from tasklet to BH workqueue.
Based on the work done by Tejun Heo <[email protected]>
Tested-by: Christian Loehle <[email protected]>
Tested-by: Aubin Constans <[email protected]>
Acked-by: Aubin Constans <[email protected]>
Acked-by: Michał Mirosław <[email protected]>
Reviewed-by: Christian Loehle <[email protected]>
Signed-off-by: Allen Pais <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts the SDHI driver from tasklet to BH workqueue.
Based on the work done by Tejun Heo <[email protected]>
Signed-off-by: Allen Pais <[email protected]>
[wsa: fixed build faliures, corrected whitespace issues]
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Tested-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Some controllers may not be able to reach a bus clock as low as 400 KHz
due to a lack of sufficient divisors. In these cases, the SD card slot
becomes non-functional as Linux continuously attempts to set the bus
clock to 400 KHz. If the controller is incapable of getting that low,
set its minimum frequency instead. While this may eliminate some SD
cards, it allows those capable of operating at the controller's minimum
frequency to be used.
Signed-off-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240625-gigantic-frown-1ef4afa3e6fa@wendy
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Commit c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261") silently
removed RTSX_MS_CARD from its MFD cell, so rtsx_pci_ms isn't used
by any driver anymore.
Since there doesn't seem to any complaint, hence drop the driver.
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
When ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/dwc/pci-exynos.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pci-host-generic.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-altera.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-altera-msi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mediatek.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mediatek-gen3.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/vmd.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-apple.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mt7621.o
Add the missing MODULE_DESCRIPTION() macro.
[kwilczynski: update MODULE_DESCRIPTION() text, commit log]
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Jeff Johnson <[email protected]>
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Acked-by: Nirmal Patel <[email protected]>
Acked-by: Sergio Paracuellos <[email protected]> # MT7621
|
|
When ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/pci-stub.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/pci-pf-stub.o
Add the missing MODULE_DESCRIPTION() macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jeff Johnson <[email protected]>
[bhelgaas: update MODULE_DESCRIPTION() text]
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Krzysztof Wilczyński <[email protected]>
|
|
As it turns out, clearing the BSS was not the right fix for the issue
that was ultimately fixed by commit decd347c2a75 ("x86/efistub:
Reinstate soft limit for initrd loading"), and given that the Windows
EFI loader becomes very unhappy when entered with garbage in BSS, this
is one thing that x86 PC EFI implementations can be expected to get
right.
So drop it from the pure PE entrypoint. The handover protocol entrypoint
still needs this - it is used by the flaky distro bootloaders that
barely implement PE/COFF at all.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The fail label is only used in a situation where the previous EFI API
call succeeded, and so status will be set to EFI_SUCCESS. Fix this, by
dropping the goto entirely, and call efi_exit() with the correct error
code.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
0c18184de990 ("platform/x86: apple-gmux: support MMIO gmux on T2 Macs")
brought support for T2 Macs in apple-gmux. But in order to use dual GPU,
the integrated GPU has to be enabled. On such dual GPU EFI Macs, the EFI
stub needs to report that it is booting macOS in order to prevent the
firmware from disabling the iGPU.
This patch is also applicable for some non T2 Intel Macs.
Based on this patch for GRUB by Andreas Heider <[email protected]>:
https://lists.gnu.org/archive/html/grub-devel/2013-12/msg00442.html
Credits also goto Kerem Karabay <[email protected]> for helping porting
the patch to the Linux kernel.
Cc: Orlando Chamberlain <[email protected]>
Signed-off-by: Aditya Garg <[email protected]>
[ardb: limit scope using list of DMI matches provided by Lukas and Orlando]
Reviewed-by: Lukas Wunner <[email protected]>
Tested-by: Aditya Garg <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The smbios.c source file is not currently included in the x86 build, and
before we can do so, it needs some tweaks to build correctly in
combination with the EFI mixed mode support.
Reviewed-by: Lukas Wunner <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Add ltr_restore support to undo the ltr_ignore action. It sets the
ltr_ignore bit of the corresponding IP to 0. Ltr_restore reuses some
functionality of pmc_core_ltr_ignore_write() so moved the common
functionality into a helper function.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Replace ternary operator with Elvis operator in
pmc_core_ltr_ignore_write() for better readability
of the code.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
DEFINE_SHOW_STORE_ATTRIBUTE() macro can be used for the ltr_ignore
attribute for better readability.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
min_t() check is not needed in pmc_core_ltr_ignore_write().
kstrtox() has a built-in overflow check.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Add a column in ltr_show output to show if the IP has been ignored.
A mutex lock is used to protect the critical section as other processes
might try to write to the LTR ignore register at the same time.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Move pmc variable assignment closer to the conditional statement of
its first use for better readability.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Convert the index variables type to unsigned to avoid confusion and
errors.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ij: Converted also pmc_core_lpm_get_arr_size() to return unsigned int]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Use macros defined in cleanup.h to automate the mutex lock/unlock flow.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Use the return value of pmc_core_send_msg() directly instead of
assigning another code when an error occurs.
Signed-off-by: Xi Pardee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
This reverts commit f26a38e61c03fdfacb6b596e1daf665cf4526a60, since it
causes the following sparse warnings:
sparse warnings: (new ones prefixed by >>)
>> drivers/firewire/ohci.c:891:23: sparse: sparse: cast to restricted __be32
>> drivers/firewire/ohci.c:891:23: sparse: sparse: cast from restricted __le32
drivers/firewire/ohci.c:892:23: sparse: sparse: cast to restricted __be32
drivers/firewire/ohci.c:892:23: sparse: sparse: cast from restricted __le32
drivers/firewire/ohci.c:893:23: sparse: sparse: cast to restricted __be32
drivers/firewire/ohci.c:893:23: sparse: sparse: cast from restricted __le32
drivers/firewire/ohci.c:905:31: sparse: sparse: cast to restricted __be32
drivers/firewire/ohci.c:905:31: sparse: sparse: cast from restricted __le32
drivers/firewire/ohci.c:914:31: sparse: sparse: cast to restricted __be32
drivers/firewire/ohci.c:914:31: sparse: sparse: cast from restricted __le32
drivers/firewire/ohci.c:939:18: sparse: sparse: cast to restricted __be32
drivers/firewire/ohci.c:939:18: sparse: sparse: cast from restricted __le32
drivers/firewire/ohci.c:2033:23: sparse: sparse: cast to restricted __be32
drivers/firewire/ohci.c:2033:23: sparse: sparse: cast from restricted __le32
drivers/firewire/ohci.c:2037:27: sparse: sparse: cast to restricted __be32
drivers/firewire/ohci.c:2037:27: sparse: sparse: cast from restricted __le32
drivers/firewire/ohci.c:2038:27: sparse: sparse: cast to restricted __be32
drivers/firewire/ohci.c:2038:27: sparse: sparse: cast from restricted __le32
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
While working on rvkms, I noticed that there's no code that actually uses
the drm_pending_vblank_event that's embedded in vkms_output. So, just drop
the member from the struct.
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Louis Chauvet <[email protected]>
Tested-by: Louis Chauvet <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
|
|
systems
On shared memory CPPC systems, with amd_pstate=active mode, the change
in scaling_max_freq doesn't get written to the shared memory
region. Due to this, the writes to the scaling_max_freq sysfs file
don't take effect. Fix this by propagating the scaling_max_freq
changes to the shared memory region.
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Reported-by: David Arcari <[email protected]>
Signed-off-by: Dhananjay Ugwekar <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mario Limonciello <[email protected]>
|