aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-07-10pwm: Add driver for AXI PWM generatorDrew Fustini3-0/+255
Add support for the Analog Devices AXI PWM Generator. This device is an FPGA-implemented peripheral used as PWM signal generator and can be interfaced with AXI4. The register map of this peripheral makes it possible to configure the period and duty cycle of the output signal. Link: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html Co-developed-by: Sergiu Cuciurean <[email protected]> Signed-off-by: Sergiu Cuciurean <[email protected]> Co-developed-by: David Lechner <[email protected]> Signed-off-by: David Lechner <[email protected]> Signed-off-by: Drew Fustini <[email protected]> Acked-by: Nuno Sa <[email protected]> Co-developed-by: Trevor Gamblin <[email protected]> Signed-off-by: Trevor Gamblin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Uwe Kleine-König <[email protected]>
2024-07-10pwm: atmel-tcb: Fix race condition and convert to guardsUwe Kleine-König1-7/+5
The hardware only supports a single period length for both PWM outputs. So atmel_tcb_pwm_config() checks the configuration of the other output if it's compatible with the currently requested setting. The register values are then actually updated in atmel_tcb_pwm_enable(). To make this race free the lock must be held during the whole process, so grab the lock in .apply() instead of individually in atmel_tcb_pwm_disable() and atmel_tcb_pwm_enable() which then also covers atmel_tcb_pwm_config(). To simplify handling, use the guard helper to let the compiler care for unlocking. Otherwise unlocking would be more difficult as there is more than one exit path in atmel_tcb_pwm_apply(). Fixes: 9421bade0765 ("pwm: atmel: add Timer Counter Block PWM driver") Signed-off-by: Uwe Kleine-König <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Uwe Kleine-König <[email protected]>
2024-07-10rtc: stm32: add new st,stm32mp25-rtc compatible and check RIF configurationValentin Caron1-0/+78
Introduce new st,stm32mp25-rtc compatible. It is based on st,stm32mp1-rtc. Difference is that stm32mp25 soc implements a triple protection on RTC registers: - Secure bit based protection - Privileged context based protection - Compartment ID filtering based protection This driver will now check theses configurations before probing to avoid exceptions and fake reads on register. At this time, driver needs only to check two resources: INIT and ALARM_A. Other resources are not used. Resource isolation framework (RIF) is a comprehensive set of hardware blocks designed to enforce and manage isolation of STM32 hardware resources, like memory and peripherals. Link: https://www.st.com/resource/en/reference_manual/rm0457-stm32mp25xx-advanced-armbased-3264bit-mpus-stmicroelectronics.pdf#page=4081 Signed-off-by: Valentin Caron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2024-07-10vfio/pci: Init the count variable in collecting hot-reset devicesYi Liu1-1/+1
The count variable is used without initialization, it results in mistakes in the device counting and crashes the userspace if the get hot reset info path is triggered. Fixes: f6944d4a0b87 ("vfio/pci: Collect hot-reset devices to local buffer") Link: https://bugzilla.kernel.org/show_bug.cgi?id=219010 Reported-by: Žilvinas Žaltiena <[email protected]> Cc: Beld Zhang <[email protected]> Signed-off-by: Yi Liu <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]>
2024-07-10drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completedYiPeng Chai2-1/+23
The problem case is as follows: 1. GPU A triggers a gpu ras reset, and GPU A drives GPU B to also perform a gpu ras reset. 2. After gpu B ras reset started, gpu B queried a DE data. Since the DE data was queried in the ras reset thread instead of the page retirement thread, bad page retirement work would not be triggered. Then even if all gpu resets are completed, the bad pages will be cached in RAM until GPU B's bad page retirement work is triggered again and then saved to eeprom. This patch can save the bad pages to eeprom in time after gpu ras reset is completed. v2: 1. Add the above description to code comments. 2. Reuse existing function. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amdgpu: flush all cached ras bad pages to eepromYiPeng Chai1-6/+29
Before uninstalling gpu driver, flush all cached ras bad pages to eeprom. v2: Put the same code into a function and reuse the function. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amdgpu: select compute ME engines dynamicallySunil Khatri1-1/+1
GFX ME right now is one but this could change in future SOC's. Use no of ME for GFX as start point for ME for compute for GFX12. Signed-off-by: Sunil Khatri <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amd/display: Allow display DCC for DCN401Aurabindo Pillai1-6/+25
To enable mesa to use display dcc, DM should expose them in the supported modifiers. Add the best (most efficient) modifiers first. Signed-off-by: Aurabindo Pillai <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amdgpu: select compute ME engines dynamicallySunil Khatri1-1/+1
GFX ME right now is one but this could change in future SOC's. Use no of ME for GFX as start point for ME for compute for GFX11. Signed-off-by: Sunil Khatri <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amdgpu/job: Replace DRM_INFO/ERROR loggingAlex Deucher1-10/+11
Use the dev_info/err variants so we get per device logging in multi-GPU cases. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amdgpu: select compute ME engines dynamicallySunil Khatri1-1/+1
GFX ME right now is one but this could change in future SOC's. Use no of ME for GFX as start point for ME for compute for GFX10. Signed-off-by: Sunil Khatri <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amd/pm: Ignore initial value in smu response registerDanijel Slivka3-5/+40
Why: If the reg mmMP1_SMN_C2PMSG_90 is being written to during amdgpu driver load or driver unload, subsequent amdgpu driver load will fail at smu_hw_init. The default of mmMP1_SMN_C2PMSG_90 register at a clean environment is 0x1 and if value differs from expected, amdgpu driver load will fail. How to fix: Ignore the initial value in smu response register before the first smu message is sent,if smc in SMU_FW_INIT state, just proceed further to send the message. If register holds an unexpected value after smu message was sent set, smc_state to SMU_FW_HANG state and no further smu messages will be sent. v2: Set SMU_FW_INIT state at the start of smu hw_init/resume. Check smc_fw_state before sending smu message if in hang state skip sending message. Set SMU_FW_HANG only in case unexpected value is detected Signed-off-by: Danijel Slivka <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amdgpu: Initialize VF partition modeLijo Lazar4-12/+88
For SOCs with GFX v9.4.3, a VF may have multiple compute partitions. Fetch the partition information during init and initialize partition nodes. There is no support to switch partition mode in VF mode, hence disable the same. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping.Gavin Wan1-7/+13
sdma has 2 instances in SRIOV cpx mode. Odd numbered VFs have sdma0/sdma1 instances. Even numbered vfs have sdma2/sdma3. For Even numbered vfs, the sdma2 & sdma3 (irq srouce id CLIENTID_SDMA2 and CLIENTID_SDMA3) should map to irq seq 0 & 1. Signed-off-by: Gavin Wan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-10platform/x86: toshiba_acpi: Fix array out-of-bounds accessArmin Wolf1-0/+1
In order to use toshiba_dmi_quirks[] together with the standard DMI matching functions, it must be terminated by a empty entry. Since this entry is missing, an array out-of-bounds access occurs every time the quirk list is processed. Fix this by adding the terminating empty entry. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Fixes: 3cb1f40dfdc3 ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models") Cc: [email protected] Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2024-07-10hwmon: (pmbus/ltc4286) Drop unused i2c device idsUwe Kleine-König1-2/+2
The driver doesn't make use of the different numbers assigned to the different devices. So drop them. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/9a48ba0368e0c8cddc94c5e4cf3edd7eadc03a2d.1720600141.git.u.kleine-koenig@baylibre.com Signed-off-by: Guenter Roeck <[email protected]>
2024-07-10iommufd: Require drivers to supply the cache_invalidate_user opsJason Gunthorpe1-1/+2
If drivers don't do this then iommufd will oops invalidation ioctls with something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101059000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 371 Comm: qemu-system-aar Not tainted 6.8.0-rc7-gde77230ac23a #9 Hardware name: linux,dummy-virt (DT) pstate: 81400809 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=-c) pc : 0x0 lr : iommufd_hwpt_invalidate+0xa4/0x204 sp : ffff800080f3bcc0 x29: ffff800080f3bcf0 x28: ffff0000c369b300 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000000 x22: 00000000c1e334a0 x21: ffff0000c1e334a0 x20: ffff800080f3bd38 x19: ffff800080f3bd58 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8240d6d8 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000001000000002 x7 : 0000fffeac1ec950 x6 : 0000000000000000 x5 : ffff800080f3bd78 x4 : 0000000000000003 x3 : 0000000000000002 x2 : 0000000000000000 x1 : ffff800080f3bcc8 x0 : ffff0000c6034d80 Call trace: 0x0 iommufd_fops_ioctl+0x154/0x274 __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xb4 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 All existing drivers implement this op for nesting, this is mostly a bisection aid. Fixes: 8c6eabae3807 ("iommufd: Add IOMMU_HWPT_INVALIDATE") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Nicolin Chen <[email protected]> Reviewed-by: Yi Liu <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2024-07-10usb: gadget: f_uac2: fix non-newline-terminated function nameJohn Keeping1-1/+4
Most writes to configfs handle an optional newline, but do not require it. By using the number of bytes written as the limit for scnprintf() it is guaranteed that the final character in the buffer will be overwritten. This is expected if it is a newline but is undesirable when a string is written "as-is" (as libusbgx does, for example). Update the store function to strip an optional newline, matching the behaviour of usb_string_copy(). Signed-off-by: John Keeping <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10dio: Have dio_bus_match() callback take a const *Geert Uytterhoeven1-2/+2
drivers/dio/dio-driver.c:128:11: error: initialization of ‘int (*)(struct device *, const struct device_driver *)’ from incompatible pointer type ‘int (*)(struct device *, struct device_driver *)’ [-Werror=incompatible-pointer-types] 128 | .match = dio_bus_match, | ^~~~~~~~~~~~~ drivers/dio/dio-driver.c:128:11: note: (near initialization for ‘dio_bus_type.match’) Reported-by: [email protected] Fixes: d69d804845985c29 ("driver core: have match() callback in struct bus_type take a const *") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ added dio.h change - gregkh ] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10drm/panel: boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panelZhaoxiong Lv1-0/+123
The init_code of the starry-er88577 panel is very similar to the panel-boe-th101mb31ig002-28a.c driver, so we make it compatible with the panel-boe-th101mb31ig002-28a.c driver Signed-off-by: Zhaoxiong Lv <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20240709134754.28013-6-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240709134754.28013-6-lvzhaoxiong@huaqin.corp-partner.google.com
2024-07-10drm/panel: boe-th101mb31ig002: use wrapped MIPI DCS functionsZhaoxiong Lv1-80/+63
Remove conditional code and always use mipi_dsi_dcs_*multi() wrappers to simplify driver's init/enable/exit code. Convert the hex in init_code from UPPERCASE to lowercase. Signed-off-by: Zhaoxiong Lv <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20240709134754.28013-4-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240709134754.28013-4-lvzhaoxiong@huaqin.corp-partner.google.com
2024-07-10drm/panel: boe-th101mb31ig002: switch to devm_gpiod_get_optional() for ↵Zhaoxiong Lv1-1/+1
reset_gpio Switch the driver to use devm_gpiod_get_optional() on reset_gpio to avoid driver probe issues when reset line is not specified. Signed-off-by: Zhaoxiong Lv <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20240709134754.28013-3-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240709134754.28013-3-lvzhaoxiong@huaqin.corp-partner.google.com
2024-07-10drm/panel: boe-th101mb31ig002 : Make it compatible with other panel.Zhaoxiong Lv1-7/+34
This driver currently only applies to one panel. Modify it to be compatible with other panels. Signed-off-by: Zhaoxiong Lv <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20240709134754.28013-2-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240709134754.28013-2-lvzhaoxiong@huaqin.corp-partner.google.com
2024-07-10dev/parport: fix the array out-of-bounds risktuhaowen1-12/+12
Fixed array out-of-bounds issues caused by sprintf by replacing it with snprintf for safer data copying, ensuring the destination buffer is not overflowed. Below is the stack trace I encountered during the actual issue: [ 66.575408s] [pid:5118,cpu4,QThread,4]Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: do_hardware_base_addr+0xcc/0xd0 [parport] [ 66.575408s] [pid:5118,cpu4,QThread,5]CPU: 4 PID: 5118 Comm: QThread Tainted: G S W O 5.10.97-arm64-desktop #7100.57021.2 [ 66.575439s] [pid:5118,cpu4,QThread,6]TGID: 5087 Comm: EFileApp [ 66.575439s] [pid:5118,cpu4,QThread,7]Hardware name: HUAWEI HUAWEI QingYun PGUX-W515x-B081/SP1PANGUXM, BIOS 1.00.07 04/29/2024 [ 66.575439s] [pid:5118,cpu4,QThread,8]Call trace: [ 66.575469s] [pid:5118,cpu4,QThread,9] dump_backtrace+0x0/0x1c0 [ 66.575469s] [pid:5118,cpu4,QThread,0] show_stack+0x14/0x20 [ 66.575469s] [pid:5118,cpu4,QThread,1] dump_stack+0xd4/0x10c [ 66.575500s] [pid:5118,cpu4,QThread,2] panic+0x1d8/0x3bc [ 66.575500s] [pid:5118,cpu4,QThread,3] __stack_chk_fail+0x2c/0x38 [ 66.575500s] [pid:5118,cpu4,QThread,4] do_hardware_base_addr+0xcc/0xd0 [parport] Signed-off-by: tuhaowen <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driverVamsi Attunuru4-0/+698
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical function which initializes DPI DMA hardware's global configuration and enables hardware mailbox channels between physical function (PF) and it's virtual functions (VF). VF device drivers (User space drivers) use this hw mailbox to communicate any required device configuration on it's respective VF device. Accordingly, this DPI PF driver provisions the VF device resources. At the hardware level, the DPI physical function (PF) acts as a management interface to setup the VF device resources, VF devices are only provisioned to handle or control the actual DMA Engine's data transfer capabilities. Signed-off-by: Vamsi Attunuru <[email protected]> Reviewed-by: Srujana Challa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove constant result function CheckNegative()Philipp Hortmann3-37/+4
Remove function CheckNegative() that returns always true to shorten code. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in rtw_mlme_ext.hPhilipp Hortmann1-37/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/7178388b14033c24e9c6a3912a1cf19d342b9b22.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in hal_pwr_seq.hPhilipp Hortmann1-7/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/7e8117fe3d3f82d69897675c36dc9ee229b9f2ad.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in rtw_efuse.hPhilipp Hortmann1-13/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/dda48a640142abbddb846bddf656ac5adada2971.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in rtw_mlme.hPhilipp Hortmann1-26/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/e04836b646ccd0a97ee0658dc61db7ac748bcb40.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in HalPwrSeqCmd.hPhilipp Hortmann1-11/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/ac52d73666090a70e8c1edc87e511f1ea2c139e4.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in Hal8723BReg.hPhilipp Hortmann1-373/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/e01262b91c33d7f0b8370f74d95d688d7c813655.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in Hal8192CPhyReg.hPhilipp Hortmann1-881/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/59ee254104cee474b4647d605d4b3380829202a5.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Delete file hal_phy_reg_8723b.hPhilipp Hortmann2-14/+1
Delete file hal_phy_reg_8723b.h to increase overview. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/04db91723915fc5e542a49b37d07ac85f1f853f4.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Move last macro from hal_phy_reg_8723b.hPhilipp Hortmann2-5/+1
Move last macro from hal_phy_reg_8723b.h to Hal8192CPhyReg.h to prepare removal of hal_phy_reg_8723b.h. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/7e1e5591af85a452415fb137767e21d0d1d163a1.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in hal_phy_reg_8723b.hPhilipp Hortmann1-51/+0
Remove unused and double defined macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/a478e607d4fcf22f547594c4a569c27da4fb2645.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in hal_com_reg.hPhilipp Hortmann1-794/+2
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/b632a4d6cd05c53b174db4994c3107cfcec42e8d.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in rtw_ht.hPhilipp Hortmann1-22/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/7bab6def02a4a89c481d20547375d894d538458a.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: rtl8723bs: Remove unused macros in hal_com_h2c.hPhilipp Hortmann1-76/+0
Remove unused macros. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/68933c5020b21a32fdf56552db0460667f1c9113.1720245061.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: vc04_services: vchiq_core: Stop kthreads on vchiq module unloadUmang Jain3-11/+12
The various kthreads thread functions (slot_handler_func, sync_func, recycle_func) in vchiq_core and vchiq_keepalive_thread_func in vchiq_arm should be stopped when the module is unloaded. Previous attempt were made to address this but later reverted [1] due to VC04 firmware corruption. The issue around wait_event_interruptible() handling on stopping a kthread has been handled in the previous commit. Hence, it is now safe to stop kthreads on module unload, without any firmware corruption. This also completes the "Fix kernel module support" TODO item, hence drop it from the list. [1] commit ebee9ca2f59e ("Revert "staging: vc04_services: vchiq_core: Stop kthreads on shutdown"") Signed-off-by: Umang Jain <[email protected]> Tested-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10staging: vchiq_core: Bubble up wait_event_interruptible() return valueUmang Jain1-7/+24
wait_event_interruptible() returns if the condition evaluates to true it receives a signal. However, the current code always assume that the wait_event_interruptible() returns only when the event is fired. This should not be the case as wait_event_interruptible() can return on receiving a signal (with -ERESTARTSYS as return value). We should consider this and bubble up the return value of wait_event_interruptible() to exactly know if the wait has failed and error out. This will also help to properly stop kthreads in the subsequent patch. Meanwhile at it, remote_wait_event() is modified to return 0 on success, and an error code (from wait_event_interruptible()) on failure. The return value is now checked for remote_wait_event() calls. Signed-off-by: Umang Jain <[email protected]> Tested-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-10gpio: mc33880: Convert comma to semicolonChen Ni1-1/+1
Replace a comma between expression statements by a semicolon. Fixes: 1e5db00687c1 ("gpio: add MC33880 driver") Signed-off-by: Chen Ni <[email protected]> Signed-off-by: Zheng Yongjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] [Bartosz: fixed the Fixes: tag] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-07-10clk: meson: s4: pll: Constify struct regmap_configJavier Carrasco1-1/+1
`clkc_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jerome Brunet <[email protected]>
2024-07-10clk: meson: s4: peripherals: Constify struct regmap_configJavier Carrasco1-1/+1
`clkc_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jerome Brunet <[email protected]>
2024-07-10clk: meson: c3: pll: Constify struct regmap_configJavier Carrasco1-1/+1
`clkc_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jerome Brunet <[email protected]>
2024-07-10clk: meson: c3: peripherals: Constify struct regmap_configJavier Carrasco1-1/+1
`clkc_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jerome Brunet <[email protected]>
2024-07-10clk: meson: a1: pll: Constify struct regmap_configJavier Carrasco1-1/+1
`a1_pll_regmap_cfg` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jerome Brunet <[email protected]>
2024-07-10clk: meson: a1: peripherals: Constify struct regmap_configJavier Carrasco1-1/+1
`a1_periphs_regmap_cfg` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jerome Brunet <[email protected]>
2024-07-10gpio: virtuser: actually use the "trimmed" local variableBartosz Golaszewski1-3/+3
This variable is set with the intention of being passed to the subsequent strcmp() but something went wrong and it was left unused. Use it now. Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-07-10iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()Lu Baolu1-0/+1
The helper calculate_psi_aligned_address() is used to convert an arbitrary range into a size-aligned one. The aligned_pages variable is calculated from input start and end, but is not adjusted when the start pfn is not aligned and the mask is adjusted, which results in an incorrect number of pages returned. The number of pages is used by qi_flush_piotlb() to flush caches for the first-stage translation. With the wrong number of pages, the cache is not synchronized, leading to inconsistencies in some cases. Fixes: c4d27ffaa8eb ("iommu/vt-d: Add cache tag invalidation helpers") Signed-off-by: Lu Baolu <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.