| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that the basic support to collect the SCMI communication debug
metrics is in place, let us create debugfs files for the same so
that they are accessible to the users/debuggers.
Signed-off-by: Luke Parkin <[email protected]>
Reviewed-by: Cristian Marussi <[email protected]>
Tested-by: Cristian Marussi <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add the support for counting some of the SCMI communication debug metrics
like how many were sent successfully or with some errors, responses
received, notifications and delayed responses, transfer timeouts and
errors from the firmware/platform.
In many cases, the traces exists. But the traces are not always necessarily
enabled and getting such cumulative SCMI communication debug metrics helps
in understanding if there are any possible improvements that can be made
on either side of SCMI communication.
Signed-off-by: Luke Parkin <[email protected]>
Reviewed-by: Cristian Marussi <[email protected]>
Tested-by: Cristian Marussi <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Since SCMI involves interaction with the entity(software, firmware and/or
hardware) providing services or features, it is quite useful to track
certain metrics(for pure debugging purposes) like how many messages were
sent or received, were there any failures, what kind of failures, ..etc.
Add a new optional config option for the above purpose and the initial
support for counting such key debug metrics.
Signed-off-by: Luke Parkin <[email protected]>
Reviewed-by: Cristian Marussi <[email protected]>
Tested-by: Cristian Marussi <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Variable info is already defined in the outer code block and there is no
need to define the same again in the inner code block. Let us just remove
that duplicate definition of the variable info. No functional change.
Reviewed-by: Cristian Marussi <[email protected]>
Tested-by: Cristian Marussi <[email protected]>
Signed-off-by: Luke Parkin <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
This allows the driver to be unbound and bound again. Otherwise, when
unbinding the driver, there will be leftover sysfs entries.
When rebinding the driver, it also ends up touching freed memory when
adding to the notifier chain as the old one was not removed and ends up
being traversed.
Add a remove_new driver hook, which removes the notifier from the chain and
unregisters the typec ports.
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tzung-Bi Shih <[email protected]>
|
|
Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.
Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:
* 1 byte (seen on iOS 4.2.1, 8.4):
* 03: carrier off (mode 0)
* 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
* 03 03 03: carrier off (mode 0)
* 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
* 03 03 03 00: carrier off (mode 0)
* 04 03 03 00: carrier off (mode 1)
* 06 03 03 00: carrier off (mode 4)
* 04 04 03 04: carrier on (mode 0 and 1)
* 06 04 03 04: carrier on (mode 4)
Before this change, the driver always used the first byte of the
response to determine carrier state.
From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.
Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.
Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.
Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.
Signed-off-by: Foster Snowhill <[email protected]>
Tested-by: Georgi Valkov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
RX callbacks can fail for multiple reasons:
* Payload too short
* Payload formatted incorrecly (e.g. bad NCM framing)
* Lack of memory
None of these should cause the driver to seize up.
Make such failures non-critical and continue processing further
incoming URBs.
Signed-off-by: Foster Snowhill <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On iPhone 15 Pro Max one can observe periodic URBs with no payload
on the "bulk in" (RX) endpoint. These don't seem to do anything
meaningful. Reproduced on iOS 17.5.1 and 17.6.
This behaviour isn't observed on iPhone 11 on the same iOS version. The
nature of these zero-length URBs is so far unknown.
Drop RX URBs with no payload.
Signed-off-by: Foster Snowhill <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Rx URB length was already checked in ipheth_rcvbulk_callback_legacy()
and ipheth_rcvbulk_callback_ncm(), depending on the current mode.
The check in ipheth_rcvbulk_callback() was thus mostly a duplicate.
The only place in ipheth_rcvbulk_callback() where we care about the URB
length is for the initial control frame. These frames are always 4 bytes
long. This has been checked as far back as iOS 4.2.1 on iPhone 3G.
Remove the extraneous URB length check. For control frames, check for
the specific 4-byte length instead.
Signed-off-by: Foster Snowhill <[email protected]>
Tested-by: Georgi Valkov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.
Hence the order of actions in ipheth_close() needs
to be inverted.
Signed-off-by: Oliver Neukum <[email protected]>
Signed-off-by: Foster Snowhill <[email protected]>
Tested-by: Georgi Valkov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After we detect that mmio is returning all 0xff, we believe that the GPU
has dropped off the pci bus and is dead. Mark the device as wedged such
that we can propagate the failure back to userspace and wait for
recovery.
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Jiri Slaby advises me that the preferred mechanism for declaring
string constants is static char arrays, so use that here.
This mostly reverts
commit 1692b9775e74 ("net: stmmac: xgmac: use #define for string constants")
That commit was a fix for
commit 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels").
The fix being replacing const char * with #defines in order to address
compilation failures observed on GCC 6 through 10.
Compile tested only.
No functional change intended.
Suggested-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This commit changes magic numbers in phy operations.
Some shifted registers was replaced with bitfield macros.
No functional changes done.
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Pawel Dembicki <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
- remove Power Saving Policy property
Core Changes:
- update connector documentation
CI:
- add tests for mediatek, meson, rockchip
Driver Changes:
amdgpu:
- revert support for Power Saving Policy property
bridge:
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
mgag200:
- transparently support BMC outputs
omapdrm:
- use common helper for_each_endpoint_of_node()
panel:
- panel-edp: fix name for HKC MB116AN01
vkms:
- clean up endianess warnings
Signed-off-by: Daniel Vetter <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When validating VF config on the media GT, we may wrongly report
that VF is already partially configured on it, as we consider GGTT
and LMEM provisioning done on the primary GT (since both GGTT and
LMEM are tile-level resources, not a GT-level).
This will cause skipping a VF auto-provisioning on the media-GT and
in result will block a VF from successfully initialize that GT.
Fix that by considering GGTT and LMEM configurations only when
checking if a VF provisioning is complete, and omit GGTT and LMEM
when reporting empty/partial provisioning.
Fixes: 234670cea9a2 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned")
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Piotr Piórkowski <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- correct dual pps handling for MTL_PCH+ [display] (Dnyaneshwar Bhadane)
- Adjust vma offset for framebuffer mmap offset [gem] (Andi Shyti)
- Fix Virtual Memory mapping boundaries calculation [gem] (Andi Shyti)
- Allow evicting to use the requested placement (David Gow)
- Attempt to get pages without eviction first (David Gow)
Signed-off-by: Dave Airlie <[email protected]>
From: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZrSFpj20b1LbBhCJ@linux
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix off-by-one when processing RTP rules (Lucas)
- Use dma_fence_chain_free in chain fence unused as a sync (Brost)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Take ref to VM in delayed dump snapshot (Brost)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Mgag200's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.
The workaround is now obsolete as the VGA-BMC connector handles BMC
support internally. Hence, remove the driver's code and the BMC output
entirely.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move calls to stop and start BMC scanout from CRTC helpers to the
VGA-BMC encoder's atomic_disable and atomic_enable. Makes the BMC
scanout transparent to the CRTC.
DRM's atomic helpers call an encoder's atomic_disable and atomic_enable
helpers for all enabled encoders. The BMC stops scanning out the VGA
signal if modeset disables the VGA encoder, and starts scanning out
if the modeset enables the VGA encoder.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Control the VIDRST pin from the VGA-BMC encoder's atomic_check and
remove the respective code from CRTC. Makes the VIDRST functionality
fully composable.
The VIDRST pin allows an external clock source to control the SYNC
signals of the Matrox chip. The functionality is part of the CRTC,
but depends on the presence of the clock source. This is the case for
some BMCs, so control the pin from the VGA-BMC output.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The VGA-BMC connector selects the VGA output if a display has been
attached to the physical connector. Otherwise it selects the BMC
output. In any case, the connector status is set to 'detected', so
that the userspace compositor displays to it.
Depending on the setting, the connector's display modes either come
from the VGA monitor's EDID or from an internal list of BMC-compatible
modes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Duplicate VGA output to VGA-BMC output and update all code for Matrox
server chips. The new output represents a VGA output that has a BMC
attached to it. No functional changes so far.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_event_timeout() causing
patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
wait_for_completion_interruptible_timeout()
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of
wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_for_completion_timeout() causing
patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Ismael Luceno <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_event_timeout() causing
patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_event_timeout() causing
patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_event_timeout() causing
patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_for_completion_timeout() causing
patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_for_completion_timeout() causing
patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining, also for the code path using 'tmo' as a variable.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Prabhakar <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
pm_runtime_enable() should happen prior to vfe_get() since vfe_get() calls
pm_runtime_resume_and_get().
This is a basic race condition that doesn't show up for most users so is
not widely reported. If you blacklist qcom-camss in modules.d and then
subsequently modprobe the module post-boot it is possible to reliably show
this error up.
The kernel log for this error looks like this:
qcom-camss ac5a000.camss: Failed to power up pipeline: -13
Fixes: 02afa816dbbf ("media: camss: Add basic runtime PM support")
Reported-by: Johan Hovold <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Tested-by: Johan Hovold <[email protected]>
Cc: <[email protected]>
Signed-off-by: Bryan O'Donoghue <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The use_count check was introduced so that multiple concurrent Raw Data
Interfaces RDIs could be driven by different virtual channels VCs on the
CSIPHY input driving the video pipeline.
This is an invalid use of use_count though as use_count pertains to the
number of times a video entity has been opened by user-space not the number
of active streams.
If use_count and stream-on count don't agree then stop_streaming() will
break as is currently the case and has become apparent when using CAMSS
with libcamera's released softisp 0.3.
The use of use_count like this is a bit hacky and right now breaks regular
usage of CAMSS for a single stream case. Stopping qcam results in the splat
below, and then it cannot be started again and any attempts to do so fails
with -EBUSY.
[ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
...
[ 1265.510630] Call trace:
[ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
[ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common]
[ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2]
[ 1265.510673] v4l_streamoff+0x24/0x30 [videodev]
[ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev]
[ 1265.510732] video_usercopy+0x304/0x8c4 [videodev]
[ 1265.510757] video_ioctl2+0x18/0x34 [videodev]
[ 1265.510782] v4l2_ioctl+0x40/0x60 [videodev]
...
[ 1265.510944] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 0 in active state
[ 1265.511175] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 1 in active state
[ 1265.511398] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 2 in active st
One CAMSS specific way to handle multiple VCs on the same RDI might be:
- Reference count each pipeline enable for CSIPHY, CSID, VFE and RDIx.
- The video buffers are already associated with msm_vfeN_rdiX so
release video buffers when told to do so by stop_streaming.
- Only release the power-domains for the CSIPHY, CSID and VFE when
their internal refcounts drop.
Either way refusing to release video buffers based on use_count is
erroneous and should be reverted. The silicon enabling code for selecting
VCs is perfectly fine. Its a "known missing feature" that concurrent VCs
won't work with CAMSS right now.
Initial testing with this code didn't show an error but, SoftISP and "real"
usage with Google Hangouts breaks the upstream code pretty quickly, we need
to do a partial revert and take another pass at VCs.
This commit partially reverts commit 89013969e232 ("media: camss: sm8250:
Pipeline starting and stopping for multiple virtual channels")
Fixes: 89013969e232 ("media: camss: sm8250: Pipeline starting and stopping for multiple virtual channels")
Reported-by: Johan Hovold <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Tested-by: Johan Hovold <[email protected]>
Cc: <[email protected]>
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
`tda1997x_codec_driver` is not modified after its declaration, and it
is only passed to `devm_snd_soc_register_component()`, which expects
a constant `snd_soc_component_driver`.
Move `tda1997x_codec_driver` to a read-only section by declaring it
const.
Signed-off-by: Javier Carrasco <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Currently, the Raspberry Pi PiSP Backend (BE) ISP is only present on the
Broadcom BCM2712-based Raspberry Pi 5. Hence add a dependency on
ARCH_BCM2835, to prevent asking the user about this driver when
configuring a kernel without Broadcom BCM2835 family support. The
dependency can be relaxed if/when the encoder appears on other SoC
families.
Fixes: 12187bd5d4f8 ("media: raspberrypi: Add support for PiSP BE")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: FLorian Fainelli <[email protected]>
Acked-by: Jacopo Mondi <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The v4l_print_create_buffers() function was missing a ', ' in
the pr_cont call, leading to logs like this:
[93293.533425] video0: VIDIOC_CREATE_BUFS: index=0, count=0, memory=dmabuf, capabilities=0x00000297, max num buffers=32type=vid-cap, width=0, height=0, pixelformat=.... little-endian (0x00000000),
field=any, bytesperline=0, sizeimage=0, colorspace=0, flags=0x0, ycbcr_enc=0, quantization=0, xfer_func=0
Signed-off-by: Hans Verkuil <[email protected]>
Reviewed-by: Sebastian Fricke <[email protected]>
|
|
This reverts commit b9302fa7ed979e84b454e4ca92192cf485a4ed41.
As Fedor Pchelkin pointed out, this commit violates the
convention of using the macro return value, which causes errors.
For example, in functions tda18271_attach(), xc5000_attach(),
simple_tuner_attach().
Link: https://lore.kernel.org/linux-media/20240424202031.syigrtrtipbq5f2l@fpc/
Suggested-by: Fedor Pchelkin <[email protected]>
Signed-off-by: Roman Smirnov <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a spelling mistake in a string in the gc05a2_test_pattern_menu
array. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Fixes: df70ddad81b4 ("[media] rtl2830: implement PID filter")
Signed-off-by: Junlin Li <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Signed-off-by: Junlin Li <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: 4b01e01a81b6 ("[media] rtl2832: implement PID filter")
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <[email protected]>
Reviewed-by: Paul Elder <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
GCC5 cannot figure out that the expressions are constant, and that
triggers a build failure. Rewrite the expressions.
The following gcc5 error is workaround:
#define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
^
BM_PXP_CSC1_COEF0_YCBCR_MODE |
^
#define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
^
drivers/media/platform/nxp/imx-pxp.c: In function 'pxp_setup_csc':
drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_lim[0]')
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
'struct media_entity_operations' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
20694 1394 32 22120 5668 drivers/media/platform/ti/cal/cal-camerarx.o
After:
=====
text data bss dec hex filename
20726 1362 32 22120 5668 drivers/media/platform/ti/cal/cal-camerarx.o
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Add the GXLX SoC platform which is based on GXL but omits the VP9 codec.
Signed-off-by: Christian Hewitt <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
There is a fourcc format string for printing formats. Use it instead of
open coding the conversion.
Signed-off-by: Michael Tretter <[email protected]>
Reviewed-by: Nicolas Dufresne <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|