| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Print a newline for easier userspace handling.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
key_lookup() will always return a key, even if that key is revoked
or invalidated. So check for invalid keys before continuing.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
There is a difference between TLS configured (ie the user has
provisioned/requested a key) and TLS enabled (ie the connection
is encrypted with TLS). This becomes important for secure concatenation,
where the initial authentication is run on an unencrypted connection
(ie with TLS configured, but not enabled), and then the queue is reset to
run over TLS (ie TLS configured _and_ enabled).
So to differentiate between those two states store the generated
key in opts->tls_key (as we're using the same TLS key for all queues),
the key serial of the resulting TLS handshake in ctrl->tls_pskid
(to signal that TLS on the admin queue is enabled), and a simple
flag for the queues to indicated that TLS has been enabled.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
TP8018 introduced a new TLS PSK identifier version (version 1), which appended
a PSK hash value to the existing identifier (cf NVMe TCP specification v1.1,
section 3.6.1.3 'TLS PSK and PSK Identity Derivation').
An original (version 0) identifier has the form:
NVMe0<type><hmac> <hostnqn> <subsysnqn>
and a version 1 identifier has the form:
NVMe1<type><hmac> <hostnqn> <subsysnqn> <hash>
This patch modifies the lookup algorthm to compare only the first part
of the identifier (excluding the hash value) to handle both version 0 and
version 1 identifiers.
And the spec declares 'version 0' identifiers obsolete, so the lookup
algorithm is modified to prever v1 identifiers.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
If a multicast address is removed but there are still some multicast
addresses, that address would remain programmed into the frame filter.
Fix this by explicitly setting the enable bit for each filter.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
success
After successfully programming the SPI flash with an MFPS auto update
image, the error sysfs attribute reports programming:timeout.
This is caused by an incorrect check on the return value from
wait_for_completion_timeout() in mpfs_auto_update_poll_complete().
Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Steve Wilkins <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
|
|
Checking for index < 0 is useless because the find_deepest_state()
function never really returns a negative value.
Since this hasn't been reported in over 9 years it's dead code, so
remove it.
Signed-off-by: Dhruva Gole <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Add support for ATH11K inside the WCN6855 package to the power sequencing
PCI power control driver.
Link: https://lore.kernel.org/r/[email protected]
[Bartosz: split Konrad's bigger patch, write the commit message]
Co-developed-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
|
|
Terminating for_each_available_child_of_node() loop requires dropping OF
node reference, so bailing out on errors misses this. Solve the OF node
reference leak with scoped for_each_available_child_of_node_scoped().
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
thermal_of_zone_register() calls of_thermal_zone_find() which will
iterate over OF nodes with for_each_available_child_of_node() to find
matching thermal zone node. When it finds such, it exits the loop and
returns the node. Prematurely ending for_each_available_child_of_node()
loops requires dropping OF node reference, thus success of
of_thermal_zone_find() means that caller must drop the reference.
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Cc: All applicable <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Terminating for_each_child_of_node() loop requires dropping OF node
reference, so bailing out after thermal_of_populate_trip() error misses
this. Solve the OF node reference leak with scoped
for_each_child_of_node_scoped().
Fixes: d0c75fa2c17f ("thermal/of: Initialize trip points separately")
Cc: All applicable <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Add support for enabling/disabling PCIe PHYs. We can't really do
anything about failures in the disable/remove path, so just print an
error.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
Make sure we turn off the clock on probe failure and device removal.
Fixes: de0a01f52966 ("PCI: xilinx-nwl: Enable the clock through CCF")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
The conditions logged by the misc interrupt can occur repeatedly and
continuously. Avoid rendering the console unusable by rate-limiting
these messages.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
MSIC -> MISC
Fixes: c2a7ff18edcd ("PCI: xilinx-nwl: Expand error logging")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2,
and INTD in bit 3. Hardware IRQ numbers start at 0, and we register
PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0.
Remove the subtraction of one.
This bug would cause INTx interrupts not to be delivered, as enabling INTB
would actually enable INTA, and enabling INTA wouldn't enable anything at
all. It is likely that this got overlooked for so long since most PCIe
hardware uses MSIs. This fixes the following UBSAN error:
UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11
shift exponent 18446744073709551615 is too large for 32-bit type 'int'
CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268
Hardware name: xlnx,zynqmp (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:235)
show_stack (arch/arm64/kernel/stacktrace.c:242)
dump_stack_lvl (lib/dump_stack.c:107)
dump_stack (lib/dump_stack.c:114)
__ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387)
nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1))
irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345)
__irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250)
irq_startup (kernel/irq/chip.c:270)
__setup_irq (kernel/irq/manage.c:1800)
request_threaded_irq (kernel/irq/manage.c:2206)
pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348)
Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
|
|
The users of this driver were removed in 2013 in commit 28633c54bda6
("ARM: ux500: Rip out keypad initialisation which is no longer used").
Remove the driver as well.
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Defer the ggtt node removal to a thread if runtime_pm is not active.
The ggtt node removal can be called from multiple places, including
places where we cannot protect with outer callers and places we are
within other locks. So, try to grab the runtime reference if the
device is already active, otherwise defer the removal to a separate
thread from where we are sure we can wake the device up.
v2: - use xe wq instead of system wq (Matt and CI)
- Avoid GFP_KERNEL to be future proof since this removal can
be called from outside our drivers and we don't want to block
if atomic is needed. (Brost)
v3: amend forgot chunk declaring xe_device.
v4: Use a xe_ggtt_region to encapsulate the node and remova info,
wihtout the need for any memory allocation at runtime.
v5: Actually fill the delayed_removal.invalidate (Brost)
v6: - Ensure that ggtt_region is not freed before work finishes (Auld)
- Own wq to ensures that the queued works are flushed before
ggtt_fini (Brost)
v7: also free ggtt_region on early !bound return (Auld)
v8: Address the null deref (CI)
v9: Based on the new xe_ggtt_node for the proper care of the lifetime
of the object.
v10: Redo the lost v5 change. (Brost)
v11: Simplify the invalidate_on_remove (Lucas)
Cc: Matthew Auld <[email protected]>
Cc: Paulo Zanoni <[email protected]>
Cc: Francois Dugast <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Matthew Brost <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
In some rare cases, the drm_mm node cannot be removed synchronously
due to runtime PM conditions. In this situation, the node removal will
be delegated to a workqueue that will be able to wake up the device
before removing the node.
However, in this situation, the lifetime of the xe_ggtt_node cannot
be restricted to the lifetime of the parent object. So, this patch
introduces the infrastructure so the xe_ggtt_node struct can be
allocated in advance and freed when needed.
By having the ggtt backpointer, it also ensure that the init function
is always called before any attempt to insert or reserve the node
in the GGTT.
v2: s/xe_ggtt_node_force_fini/xe_ggtt_node_fini and use it
internaly (Brost)
v3: - Use GF_NOFS for node allocation (CI)
- Avoid ggtt argument, now that we have it inside the node (Lucas)
- Fix some missed fini cases (CI)
v4: - Fix SRIOV critical case where config->ggtt_region was
lost (Michal)
- Avoid ggtt argument also on removal (missed case on v3) (Michal)
- Remove useless checks (Michal)
- Return 0 instead of negative errno on a u32 addr. (Michal)
- s/xe_ggtt_assign/xe_ggtt_node_assign for coherence, while we
are touching it (Michal)
v5: - Fix VFs' ggtt_balloon
Cc: Matthew Auld <[email protected]>
Cc: Michal Wajdeczko <[email protected]>
Cc: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
These operations are related to node. Convert them to the
new appropriate name space xe_ggtt_node.
v2: Also move arguments around for consistency (Lucas).
v3: s/node_balloon/node_insert_balloon and
s/node_deballoon/node_remove_balloon (Michal).
Reviewed-by: Lucas De Marchi <[email protected]>
Cc: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Introduce a new xe_ggtt_print_holes helper that attends the SRIOV
demand and finishes the goal of limiting drm_mm access to xe_ggtt.
Cc: Michal Wajdeczko <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Introduce a new xe_ggtt_largest_hole helper that attends the SRIOV
demand and continue with the goal of limiting drm_mm access to xe_ggtt.
v2: Fix a typo (Michal)
Cc: Michal Wajdeczko <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Continue with the encapsulation of drm_mm_node inside xe_ggtt.
Cc: Michal Wajdeczko <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Bring some consistency and prepare for more xe_ggtt_node related
functions to be introduced.
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
The xe_ggtt component uses drm_mm to manage the GGTT.
The drm_mm_node is just a node inside drm_mm, but in Xe we use that
only in the GGTT context. So, this patch encapsulates the drm_mm_node
into a xe_ggtt's new struct.
This is the first step towards limiting all the drm_mm access
through xe_ggtt. The ultimate goal is to have a better control of
the node insertion and removal, so the removal can be delegated
to a delayed workqueue.
v2: Fix includes and typos (Michal and Brost)
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
DPT code is so dependent on i915 vma implementation and it is not
ported yet to Xe.
This patch limits inspection to DPT's VMA struct to intel_dpt
component only, so the Xe GGTT code can evolve.
Cc: Matthew Brost <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Juha-Pekka Heikkila <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
These includes are no longer necessary, and where appropriate
are replaced by the linux/types.h one.
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Document xe_ggtt and ensure it is part of the built kernel docs.
v2: - Accepted all Michal's suggestions
- Rebased on top of new set_pte per platform/wa function pointer
v3: - Typos and other acronym fixes (Michal)
Cc: Matthew Brost <[email protected]>
Cc: Michal Wajdeczko <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]> #v1
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Apparently this was only useful when enabling ggtt support
for the very first time and never used again.
It is also not useful now that we have the ggtt_dump available
through debugfs.
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Use async function calls to make namespace scanning happen in parallel.
Without the patch, NVME namespaces are scanned serially, so it can take
a long time for all of a controller's namespaces to become available,
especially with a slower (TCP) interface with large number of
namespaces.
It is not uncommon to have large numbers (hundreds or thousands) of
namespaces on nvme-of with storage servers.
The time it took for all namespaces to show up after connecting (via
TCP) to a controller with 1002 namespaces was measured on one system:
network latency without patch with patch
0 6s 1s
50ms 210s 10s
100ms 417s 18s
Measurements taken on another system show the effect of the patch on the
time nvme_scan_work() took to complete, when connecting to a linux
nvme-of target with varying numbers of namespaces, on a network of
400us.
namespaces without patch with patch
1 16ms 14ms
2 24ms 16ms
4 49ms 22ms
8 101ms 33ms
16 207ms 56ms
100 1.4s 0.6s
1000 12.9s 2.0s
On the same system, connecting to a local PCIe NVMe drive (a Samsung
PM1733) instead of a network target:
namespaces without patch with patch
1 13ms 12ms
2 41ms 13ms
Signed-off-by: Stuart Hayes <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
list_entry() will never return a NULL pointer, thus remove the
check.
Signed-off-by: Yuesong Li <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Make the imx_thermal driver use the .should_bind() thermal zone callback
to provide the thermal core with the information on whether or not to
bind the given cooling device to the given trip point in the given
thermal zone. If it returns 'true', the thermal core will bind the
cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
In the imx_thermal case, it only needs to return 'true' for the passive
trip point and it will match any cooling device passed to it, in
analogy with the old-style imx_bind() callback function.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Make the mlxsw core_thermal driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
It replaces the .bind() and .unbind() thermal zone callbacks (in 3
places) which assumed the same trip points ordering in the driver
and in the thermal core (that may not be true any more in the
future). The .bind() callbacks used loops over trip point indices
to call thermal_zone_bind_cooling_device() for the same cdev (once
it had been verified) and all of the trip points, but they passed
different 'upper' and 'lower' values to it for each trip.
To retain the original functionality, the .should_bind() callbacks
need to use the same 'upper' and 'lower' values that would be used
by the corresponding .bind() callbacks when they are about to return
'true'. To that end, the 'priv' field of each trip is set during the
thermal zone initialization to point to the corresponding 'state'
object containing the maximum and minimum cooling states of the
cooling device.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Make the acerhdf driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
The previously existing acerhdf_bind() function bound cooling devices
to thermal trip point 0 only, so the new callback needs to return 'true'
for trip point 0. However, it is straightforward to observe that trip
point 0 is an active trip point and the only other trip point in the
driver's thermal zone is a critical one, so it is sufficient to return
'true' from that callback if the type of the given trip point is
THERMAL_TRIP_ACTIVE.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Tested-by: Peter Kästle <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
thermal_unbind_cdev_from_trip()
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
are only called locally in the thermal core now, they can be static,
so change their definitions accordingly and drop their headers from
the global thermal header file.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Make the ACPI thermal zone driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
This replaces the .bind() and .unbind() thermal zone callbacks which
allows the code to be simplified quite significantly while providing
the same functionality.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
The current design of the code binding cooling devices to trip points in
thermal zones is convoluted and hard to follow.
Namely, a driver that registers a thermal zone can provide .bind()
and .unbind() operations for it, which are required to call either
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip(),
respectively, or thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), respectively, for every relevant
trip point and the given cooling device. Moreover, if .bind() is
provided and .unbind() is not, the cleanup necessary during the removal
of a thermal zone or a cooling device may not be carried out.
In other words, the core relies on the thermal zone owners to do the
right thing, which is error prone and far from obvious, even though all
of that is not really necessary. Specifically, if the core could ask
the thermal zone owner, through a special thermal zone callback, whether
or not a given cooling device should be bound to a given trip point in
the given thermal zone, it might as well carry out all of the binding
and unbinding by itself. In particular, the unbinding can be done
automatically without involving the thermal zone owner at all because
all of the thermal instances associated with a thermal zone or cooling
device going away must be deleted regardless.
Accordingly, introduce a new thermal zone operation, .should_bind(),
that can be invoked by the thermal core for a given thermal zone,
trip point and cooling device combination in order to check whether
or not the cooling device should be bound to the trip point at hand.
It takes an additional cooling_spec argument allowing the thermal
zone owner to specify the highest and lowest cooling states of the
cooling device and its weight for the given trip point binding.
Make the thermal core use this operation, if present, in the absence of
.bind() and .unbind(). Note that .should_bind() will be called under
the thermal zone lock.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
acquire the thermal zone lock, the locking rules for their callers get
complicated. In particular, the thermal zone lock cannot be acquired
in any code path leading to one of these functions even though it might
be useful to do so.
To address this, remove the thermal zone locking from both these
functions, add lockdep assertions for the thermal zone lock to both
of them and make their callers acquire the thermal zone lock instead.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Two sysfs show/store functions for attributes representing thermal
instances, trip_point_show() and weight_store(), retrieve the thermal
zone pointer from the instance object at hand, but they may also get
it from their dev argument, which is more consistent with what the
other thermal sysfs functions do, so make them do so.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Because the trip and cdev pointers are sufficient to identify a thermal
instance holding them unambiguously, drop the additional thermal zone
checks from two loops walking the list of thermal instances in a
thermal zone.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
It is not necessary to look up the thermal zone and the cooling device
in the respective global lists to check whether or not they are
registered. It is sufficient to check whether or not their respective
list nodes are empty for this purpose.
Use the above observation to simplify thermal_bind_cdev_to_trip(). In
addition, eliminate an unnecessary ternary operator from it.
Moreover, add lockdep_assert_held() for thermal_list_lock to it because
that lock must be held by its callers when it is running.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Fold bind_cdev() into __thermal_cooling_device_register() and bind_tz()
into thermal_zone_device_register_with_trips() to reduce code bloat and
make it somewhat easier to follow the code flow.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Introduce a facility allowing the thermal core functionality to be
exercised in a controlled way in order to verify its behavior, without
affecting its regular users noticeably.
It is based on the idea of preparing thermal zone templates along with
their trip points by writing to files in debugfs. When ready, those
templates can be used for registering test thermal zones with the
thermal core.
The temperature of a test thermal zone created this way can be adjusted
via debugfs, which also triggers a __thermal_zone_device_update() call
for it. By manipulating the temperature of a test thermal zone, one can
check if the thermal core reacts to the changes of it as expected.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Fixed ordering of kcalloc() arguments ]
[ rjw: Fixed debugfs_create_dir() return value checks ]
[ rjw: Fixed two kerneldoc comments ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Simplify the code a bunch by using managed resource helpers.
Also, there is no need to save clk pointer anymore.
Suggested-by: Christophe JAILLET <[email protected]>
Signed-off-by: Huan Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Drop the manual access to the fwnode of the device to iterate over its
child nodes. `device_for_each_child_node` macro provides direct access
to the child nodes, and given that the `child` variable is only required
within the loop, the scoped variant of the macro can be used.
Use the `device_for_each_child_node_scoped` macro to iterate over the
direct child nodes of the device.
Signed-off-by: Javier Carrasco <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|