| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and can increase over all security.
Signed-off-by: Hongbo Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
In this code, if devm_add_action_or_reset() fails, it will call
max1720x_unregister_ancillary() which in turn calls
i2c_unregister_device(). Thus the call to i2c_unregister_device() on the
following line is not required and is a double unregister. Delete it.
Fixes: 47271a935619 ("power: supply: max1720x: add read support for nvmem")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
This check was missed, before we can pass a struct iommu_domain to a
driver callback we need to validate that the domain was created by that
driver.
Fixes: bd529dbb661d ("iommufd: Add a nested HW pagetable object")
Link: https://patch.msgid.link/r/[email protected]
Reviewed-by: Nicolin Chen <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Now that the HID core can handle const report descriptors,
constify them where possible.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
core
----
- Used const qualifier for 'mhi_bus_type' to place it onto the read-only memory
segment.
pci_generic
-----------
- Fixed the Telit FE990A modem name as it was advertising the wrong product
name, thereby confusing the users.
- Added Netprisma LCUR57 and FCUN69 modems based on Qcom SDX24 and SDX6X SoCs.
- Updated the EDL (Emergency Download) firmware path for the Foxconn modems.
The patch that added the modem support mistakenly specified the generic EDL
firmware path common for Qcom based modems. But they won't work.
- Enabled the EDL trigger for all Foxconn modems to update the modem firmware.
* tag 'mhi-for-v6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
bus: mhi: host: pci_generic: Add support for Netprisma LCUR57 and FCUN69
bus: mhi: host: make mhi_bus_type const
bus: mhi: host: pci_generic: Fix the name for the Telit FE990A
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip AT91 SoC updates for v6.12
It contains:
- support for the Microchip SAM9X7 SoC:
-- power management
-- SoC identification
-- sysreg documentation updates
-- necessary Kconfig updates
* tag 'at91-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: Kconfig: add config flag for SAM9X7 SoC
ARM: at91: add support in SoC driver for new sam9x7
ARM: at91: pm: add sam9x7 SoC init config
ARM: at91: pm: add support for sam9x7 SoC family
dt-bindings: atmel-sysreg: add sam9x7
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
When TSA is compiled as module the following error is reported:
"ucc_mux_set_grant_tsa_bkpt" [drivers/soc/fsl/qe/tsa.ko] undefined!
Indeed, the ucc_mux_set_grant_tsa_bkpt symbol is not exported.
Simply export ucc_mux_set_grant_tsa_bkpt.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Herve Codina <[email protected]>
Acked-by: Christophe Leroy <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/drivers
ARM: OMAP2+: misc driver updates for v6.12
* tag 'omap-for-v6.12/drivers-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: OMAP2+: Remove obsoleted declaration for gpmc_onenand_init
bus: ti-sysc: Remove excess struct member 'disable_on_idle' description
bus: ti-sysc: Use of_property_present()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers changes for 6.12:
- A couple of imx-weim bus driver changes from Wu Bo to support compile
test and use devm_clk_get_enabled() helper to clean up code a bit
* tag 'imx-drivers-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
bus: imx-weim: change to use devm_clk_get_enabled() helper
bus: imx-weim: support compile test
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
soc/drivers
Reset controller updates for v6.12
Use get_device()/put_device() to keep reset controller devices alive
while their reset controls are acquired.
Enable support for the Amlogic T7 SoC reset controller.
Remove unused EyeQ reset bindings and add a reset controller driver
to be instantiated as auxiliary device by the EyeQ clock driver.
Fix OF node leaks in the k210 and berlin probe() error paths.
Add some simplifications and cleanup in the core, lcp18xx driver, and
uniphier bindings.
* tag 'reset-for-v6.12' of git://git.pengutronix.de/pza/linux:
reset: eyeq: add platform driver
Revert "dt-bindings: reset: mobileye,eyeq5-reset: add bindings"
reset: reset-meson: Add support for Amlogic T7 SoC reset controller
dt-bindings: reset: Add Amlogic T7 reset controller
reset: core: add get_device()/put_device on rcdev
reset: lpc18xx: simplify with devm_clk_get_enabled()
reset: lpc18xx: simplify with dev_err_probe()
reset: simplify locking with guard()
reset: k210: fix OF node leak in probe() error path
reset: berlin: fix OF node leak in probe() error path
dt-bindings: reset: socionext,uniphier-glue-reset: add top-level constraints
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/drivers
Integrator fixes for the v6.12 kernel cycle, some of_node_put():s
were missing in the SoC drivers.
* tag 'integrator-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
bus: integrator-lm: fix OF node leak in probe()
ARM: versatile: fix OF node leak in CPUs prepare
Link: https://lore.kernel.org/r/CACRpkdahXECZXWA5uv=SZtkzU0E++fQj7QWK8kYuH0-asLUPqg@mail.gmail.com
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
All Foxconn modems support generic EDL trigger to flash the firmware.
Hence, enable the EDL trigger using mhi_pci_dev_info::edl_trigger.
Signed-off-by: Slark Xiao <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[mani: Reworded the subject and description]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
|
|
Foxconn uses a unique firmware for their MHI based modems. So the generic
firmware from Qcom won't work. Hence, update the EDL firmware path to
include the 'foxconn' subdirectory based on the modem SoC so that the
Foxconn specific firmware could be used.
Respective firmware will be upstreamed to linux-firmware repo.
Cc: [email protected] # 6.11
Fixes: bf30a75e6e00 ("bus: mhi: host: Add support for Foxconn SDX72 modems")
Signed-off-by: Slark Xiao <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[mani: Reworded the subject and description]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
|
|
Add a driver for the motorcomm yt8821 2.5G ethernet phy. Verified the
driver on BPI-R3(with MediaTek MT7986(Filogic 830) SoC) development board,
which is developed by Guangdong Bipai Technology Co., Ltd..
yt8821 2.5G ethernet phy works in AUTO_BX2500_SGMII or FORCE_BX2500
interface, supports 2.5G/1000M/100M/10M speeds, and wol(magic package).
Signed-off-by: Frank Sae <[email protected]>
Reviewed-by: Sai Krishna <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
yt8521 and yt8531s as Gigabit transceiver use bit15:14(bit9 reserved
default 0) as phy speed mask, yt8821 as 2.5G transceiver uses bit9 bit15:14
as phy speed mask.
Be compatible to yt8821, reform phy speed mask and phy speed macro.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Frank Sae <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The members "start" and "end" of struct resource are of type
"resource_size_t" which can be 32bit wide.
Values read from OF however are always 64bit wide.
Avoid silently truncating the value and instead return an error value.
This can happen on real systems when the DT was created for a
PAE-enabled kernel and a non-PAE kernel is actually running.
For example with an arm defconfig and "qemu-system-arm -M virt".
Link: https://bugs.launchpad.net/qemu/+bug/1790975
Signed-off-by: Thomas Weißschuh <[email protected]>
Tested-by: Nam Cao <[email protected]>
Reviewed-by: Nam Cao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-04-2
this is a pull request of 18 patches for net-next/master.
All 18 patches add support for CAN-FD IP core found on Rockchip
RK3568.
The first patch is co-developed by Elaine Zhang and me and adds DT
bindings documentation.
The remaining 17 patches are by me and add the driver in several
stages.
linux-can-next-for-6.12-20240904-2
* tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING
can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK
can: rockchip_canfd: add hardware timestamping support
can: rockchip_canfd: enable full TX-FIFO depth of 2
can: rockchip_canfd: prepare to use full TX-FIFO depth
can: rockchip_canfd: add stats support for errata workarounds
can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register
can: rockchip_canfd: implement workaround for erratum 12
can: rockchip_canfd: implement workaround for erratum 6
can: rockchip_canfd: add TX PATH
can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5
can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO
can: rockchip_canfd: add notes about known issues
can: rockchip_canfd: add support for rk3568v3
can: rockchip_canfd: add quirk for broken CAN-FD support
can: rockchip_canfd: add quirks for errata workarounds
can: rockchip_canfd: add driver for Rockchip CAN-FD controller
dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add support for deriving protected keys from clear key token for
AES xts and HMAC keys via PCKMO instruction. Add support for
protected key generation and unwrap of protected key tokens for
these key types. Furthermore 4 new sysfs attributes are introduced:
- /sys/devices/virtual/misc/pkey/protkey/protkey_aes_xts_128
- /sys/devices/virtual/misc/pkey/protkey/protkey_aes_xts_256
- /sys/devices/virtual/misc/pkey/protkey/protkey_hmac_512
- /sys/devices/virtual/misc/pkey/protkey/protkey_hmac_1024
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Ingo Franzki <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
It is enough to notify programming mistakes to programmers just once.
Suggested-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant, and using IS_ERR is
safe enough.
Signed-off-by: Li Zetao <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.12 (take two)
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <[email protected]>
|
|
devm_clk_get_optional() and clk_prepare_enable() can be replaced by helper
function devm_clk_get_optional_enabled(). Let's simplify code with use of
devm_clk_get_optional_enabled() and avoid calling clk_disable_unprepare().
Signed-off-by: Zhang Zekun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
devm_clk_get_optional() and clk_prepare_enable() can be replaced by helper
function devm_clk_get_optional_enabled(). Let's simplify code with use of
devm_clk_get_optional_enabled() and avoid calling clk_disable_unprepare().
Signed-off-by: Zhang Zekun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
devm_clk_get() and clk_prepare_enable() can be replaced by helper
function devm_clk_get_enabled(). Let's use devm_clk_get_enabled() to
simplify code and avoid calling clk_disable_unprepare().
Signed-off-by: Zhang Zekun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
devm_clk_get() and clk_prepare_enable() can be replaced by helper
function devm_clk_get_enabled(). Let's use devm_clk_get_enabled() to
simplify code and avoid calling clk_disable_unprepare().
Signed-off-by: Zhang Zekun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
register_pmu_pm_ops() is only called at init time, via
device_initcall(), so can be marked __init. The driver can't be built as
a module.
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
The commit 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.
Fixes: 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge an amd-pstate driver update for 6.12 from Mario Limonciello:
"amd-pstate development for 6.12:
* Validate return of any attempt to update EPP limits, which fixes
the masking hardware problems."
* tag 'amd-pstate-v6.12-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
|
|
|
|
Configure correct bf number and bitmap in beamforming mcu command for
mt7992 chipsets, which only support dual-band.
Signed-off-by: Howard Hsu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
|
|
If a VIF acts as a beamformer, it should check peer's beamformee
capability, and vice versa.
Fixes: ba01944adee9 ("wifi: mt76: mt7996: add EHT beamforming support")
Signed-off-by: Howard Hsu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
|
|
According to IEEE P802.11be/D6.0 Table 9-417n, beamformee SS field stands
for the maximum number of spatial streams that the STA can receive in an
EHT sounding NDP minus 1, and the minimum value of this field is 3.
This value indicates the decoding capability of a beamformee, which is
independent of current antenna settings. Correct the value for mt7996
and mt7992 chipsets based on their HW capability.
Signed-off-by: Howard Hsu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
|
|
Fix HE and EHT beamforming capabilities for different bands and
interface types.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init")
Signed-off-by: Howard Hsu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
|
|
Advertize beacon_int_min_gcd as 100 to allow setting different beacon
intervals on different interfaces.
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
|
|
According to connac3 HW design, the WMM index of AP and STA interface
should be 0 and 3, respectively.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
|
|
During scanning, UNI_CHANNEL_RX_PATH tag is necessary for the firmware to
properly stop and resume MAC TX queue. Without this tag, HW needs more time
to resume traffic when switching back to working channel.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
|