| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a handful of small USB fixes for 6.11-rc7. Included in here
are:
- dwc3 driver fixes for two reported problems
- two typec ucsi driver fixes
- cdns2 controller reset fix
All of these have been in linux-next this week with no reported
problems"
* tag 'usb-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix cable registration
usb: typec: ucsi: Fix the partner PD revision
usb: cdns2: Fix controller reset issue
usb: dwc3: core: update LC timer as per USB Spec V3.2
usb: dwc3: Avoid waking up gadget during startxfer
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v6.12
Detailed description for this pull request:
- Add missing child node port on exttcon-ptn5150 binding document
- Convert extcon-usb-gpio.txt to yaml format for binding document
- Add new LC824206XA microUSB switch driver
: Add a new driver for the ON Semiconductor LC824206XA microUSB switch and
accessory detector chip. It has been tested on a Lenovo Yoga Tablet 2 Pro
1380. And this driver is only used on x86/ACPI (non devicetree) devices,
Therefor there is no devicetree bindings documentation.
- Apply immutable branch between power_supply and extcon tree for extcon-lc824206xa.c
* tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: lc824206xa: Fix build error of POWER_SUPPLY_PROP_USB_TYPE
dt-bindings: extcon: convert extcon-usb-gpio.txt to yaml format
dt-bindings: extcon: ptn5150: add child node port
extcon: Add LC824206XA microUSB switch driver
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support features and cleanup for 6.12
Late pull request as I was planing to include another series that
is waiting for a fix to end up in char-misc-next. That can wait
for next cycle.
Includes one immutable branch merge from MFD to get a necessary header
change.
Usual mix of a few new drivers, additional device support for existing
drivers, new features and a bunch of cleanup across tree.
New device support
==================
asahi-kasei,ak8975
- A few minor fixes as precursors to support for the AK09118 magnetometer
that is very similar to the already supported AK09112
awinic,aw96103
- New driver for this capacitive proximity sensor.
x-powers,axp202
- Add support for the axp717 (including merge of MFD immutable branch).
sophgo,saradc
- New driver for this SOC ADC.
Features
========
adi,ad4695
- Add calibration support.
bosch,bmi323
- Ensure device is in lowest power state on suspend.
Cleanup and minor fixes
=======================
treewide
- Start to standardize formatting of id tables (ADC drivers done so far).
adi,ad5449
- Drop platform data support as long unused in upstream kernel.
bosch,bmc150
- Use fwnode_irq_get_by_name() in place of of_ variant.
- Use ACPI_HANDLE() to get the handle directly rather than via
ACPI_COMPANION()
google,cros_ec_mkbp_proximity
- Include mod_devicetable.h instead of broader of.h
mirochip,mcp320x
- Drop vendorless compatible entries as not needed for backwards
compatibility and should not be used in new boards.
st,lsm6dsx
- Use iio_read_acpi_mount_matrix() helper instead of open coding the
same.
- Drop some unnecessary dev_fwnode() calls to check if a fwnode is
available. All the calls made handle this anyway.
xilinx,ams
- Use device_for_each_child_node_scoped() to avoid manual release of
fwnode handle.
tools,generic-buffer
- Handle failure to allocate trigger name.
- Cleanup .*.cmd files if present.
* tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
tools/iio: Add memory allocation failure check for trigger_name
iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
iio: adc: mcp320x: Drop vendorless compatible strings
iio: dac: ad5449: drop support for platform data
iio: adc: xilinx-ams: use device_* to iterate over device child nodes
iio: ABI: document ad4695 new attributes
doc: iio: ad4695: update for calibration support
iio: adc: ad4695: implement calibration support
iio: adc: ad4695: add 2nd regmap for 16-bit registers
iio: bmi323: peripheral in lowest power state on suspend
...
|
|
The fw_iso_context_flush_completions() is the counterpart of
fw_iso_context_schedule_work() to process isochronous context in current
process context.
This commit fulfills its documentation.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
isochronous context
In packet-per-buffer mode for isochronous context of 1394 OHCI, software
can schedule hardIRQ to the buffer in which the content of isochronous
packet is processed. The actual behaviour is different between isochronous
receive (IR) and transmit (IT) contexts in respect to isochronous cycle in
which the hardIRQ occurs.
In IR context, the hardIRQ occurs when the buffer is filled actually by
the content of received packet. If there are any isochronous cycles in
which the packet transmission is skipped, it is postponed to generate
the hardIRQ in respect to the isochronous cycle. In IT context, software
can schedule the content of packet every isochronous cycle including
skipping, therefore the hardIRQ occurs in the isochronous cycle to which
the software scheduled.
ALSA firewire stack uses the packet-per-buffer mode for both IR/IT
contexts. To process time stamp per packet (or per sample in some cases)
steadily for media clock recovery against unexpected transmission skips,
it uses an IT context to operate all of isochronous contexts by calls of
fw_iso_context_flush_completions() in the bottom-half of hardIRQ for the
IT context.
Although it looks well to handle all of isochronous contexts in a single
bottom-half context, it relatively takes longer time. In the future code
integration (not yet), it is possible to apply parallelism method to
process these context. In the case, it is useful to allow unit drivers to
schedule work items to process these isochronous contexts.
As a preparation, this commit exposes
fw_iso_context_schedule_flush_completions() as a kernel API available by
unit drivers. It is renamed from fw_iso_context_queue_work() since it is
a counter part of fw_iso_context_flush_completions().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A pile of Qualcomm clk driver fixes with two main themes: the alpha
PLL driver and shared RCGs, and one fix for the Starfive JH7110 SoC.
- The Alpha PLL clk_ops had multiple problems around setting rates.
There are a handful of patches here that fix masks and skip
enabling the clk from set_rate() when the PLL is disabled. The PLLs
are crucial to operation of the system as almost all frequencies in
the system are derived from them.
- Parking shared RCGs at a slow always on clk at registration time
breaks stuff.
USB host mode can't handle such a slow frequency and the serial
console gets all garbled when the UART clk is handed over to the
kernel. There's a few patches that don't use the shared clk_ops for
the UART clks and another one to skip parking the USB clk at
registration time.
- The Starfive PLL driver used for the CPU was busted causing cpufreq
to fail because the clk didn't change to a safe parent during
set_rate().
The fix is to register a notifier and switch to a safe parent so
the PLL can change rate in a glitch free manner"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs
clk: starfive: jh7110-sys: Add notifier for PLL0 clock
clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs
clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time
clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs
clk: qcom: gcc-x1e80100: Don't use parking clk_ops for QUPs
clk: qcom: ipq9574: Update the alpha PLL type for GPLLs
clk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flags
clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled
clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
clk: qcom: clk-alpha-pll: Fix the pll post div mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Single ufs driver fix quirking around another device spec violation"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-mediatek: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single fix for Qualcomm laptops that are affected by
missing wakeup IRQs"
* tag 'pinctrl-v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: x1e80100: Bypass PDC wakeup parent for now
|
|
The Broadcom STB 7712 is the sibling chip of the RPi 5 (2712). It has
one PCIe controller with a single port, supports gen2 and one lane only.
The current revision of the chip is "C0" or "C1".
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Jim Quinlan <[email protected]>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Stanimir Varbanov <[email protected]>
|
|
The 'type' field used in the driver to discern SoC differences is
confusing; change it to the more apt 'soc_base'.
The 'base' is because some SoCs have the same characteristics as
previous SoCs so it is convenient to classify them in the same group.
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Jim Quinlan <[email protected]>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
|
|
Always check the return value for invocations of reset_control_xxx() and
propagate the error to the next level.
Although the current functions in reset-brcmstb.c cannot fail, this may
someday change.
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Jim Quinlan <[email protected]>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Stanimir Varbanov <[email protected]>
|
|
Provide support for new chips with multiple inbound windows while
keeping the legacy support for the older chips.
In existing chips there are three inbound windows with fixed purposes:
the first was for mapping SoC internal registers, the second was for
memory, and the third was for memory but with the endian swapped.
Typically, only one window was used.
Complicating the inbound window usage was the fact that the PCIe HW
would do a baroque internal mapping of system memory, and concatenate
the regions of multiple memory controllers.
Newer chips such as the 7712 and Cable Modem SoCs take a step forward
and drop the internal mapping while providing for multiple inbound
windows. This works in concert with the dma-ranges property, where each
provided range becomes an inbound window.
Link: https://lore.kernel.org/linux-pci/[email protected]
Co-developed-by: Riyan Dhiman <[email protected]>
Signed-off-by: Riyan Dhiman <[email protected]>
Signed-off-by: Jim Quinlan <[email protected]>
[kwilczynski: commit log, wrap code comments to 80 columns]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Stanimir Varbanov <[email protected]>
Acked-by: Manivannan Sadhasivam <[email protected]>
|
|
This code was added with 2bb5095affdb ("i2c: Provide compatibility links
for i2c adapters"). Commit message stated: Provide compatibility links
for [...] the time being. We will remove them after a long transition
period.
15 years should have been a long enough transition period.
Signed-off-by: Heiner Kallweit <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant. Since
debugfs_create_file() can deal with a ERR_PTR() style pointer, drop
the check. Since mtip_hw_debugfs_init does not pay attention to the
return value, its return type can be changed to void.
Signed-off-by: Li Zetao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add support for the AXP717 ADC. The AXP717 differs from other ADCs
in this series by utilizing a 14 bit ADC for all channels (a full 16
bits with the first 2 digits reserved). It also differs by lacking a
battery discharge current channel.
Note that while the current charge channel itself is included in this
driver for the AXP717 and listed in the datasheet, no scale or offset
was given for this channel. For now no scale or offset is provided in
this driver.
Acked-by: Jonathan Cameron <[email protected]>
Signed-off-by: Chris Morgan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add the register for adc_en1 and adc_en2 to the axp_data struct. This
allows us to specify a different register to enable the adc channels
for different devices such as the AXP717.
Acked-by: Jonathan Cameron <[email protected]>
Signed-off-by: Chris Morgan <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.12
DPU:
- Fix implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
DP:
- Enable widebus on all relevant chipsets
DSI:
- Fix PHY programming on SM8350 / SM8450
HDMI:
- Add support for HDMI on MSM8998
MDP5:
- NULL string fix
GPU:
- A642L speedbin support
- A615 support
- A306 support
- A621 support
- Expand UBWC uapi
- A7xx GPU devcoredump fixes
- A5xx preemption fixes
- cleanups
Signed-off-by: Dave Airlie <[email protected]>
From: Rob Clark <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGudK7YMiKDhtvYgp=bY64OZZt0UQSkEkSxLo4rLmeVd9g@mail.gmail.com
|
|
Commit c494708d1f68 ("ata: libata: Cleanup libata-transport")
inadvertently changed the name of the link argument to ata_link in the
kdoc description of ata_tlink_add(), causing warnings to be issue when
compiling with W=1:
drivers/ata/libata-transport.c:690: warning: Function parameter or
struct member 'link' not described in 'ata_tlink_add'
drivers/ata/libata-transport.c:690: warning: Excess function parameter
'ata_link' description in 'ata_tlink_add'
Change the kdoc argument name to "link" to avoid these warnings.
Fixes: c494708d1f68 ("ata: libata: Cleanup libata-transport")
Signed-off-by: Damien Le Moal <[email protected]>
|
|
The PCIe bus can be pretty busy during boot and probe function can
see excessive delays. Let's find the minimal value out of several
tests and use it as estimated value.
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In otx2_sqe_add_ext() iplen is used to hold a 16-bit big-endian value,
but it's type is u16, indicating a host byte order integer.
Address this mismatch by changing the type of iplen to __be16.
Flagged by Sparse as:
.../otx2_txrx.c:699:31: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:699:31: expected unsigned short [usertype] iplen
.../otx2_txrx.c:699:31: got restricted __be16 [usertype]
.../otx2_txrx.c:701:54: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:701:54: expected restricted __be16 [usertype] tot_len
.../otx2_txrx.c:701:54: got unsigned short [usertype] iplen
.../otx2_txrx.c:704:60: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:704:60: expected restricted __be16 [usertype] payload_len
.../otx2_txrx.c:704:60: got unsigned short [usertype] iplen
Introduced in
commit dc1a9bf2c816 ("octeontx2-pf: Add UDP segmentation offload support")
No functional change intended.
Compile tested only by author.
Tested-by: Geetha sowjanya <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Recently I noticed that both gcc-14 and clang-18 report that passing
a non-string literal as the format argument of alloc_workqueue()
is potentially insecure.
E.g. clang-18 says:
.../rvu.c:2493:32: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
2493 | mw->mbox_wq = alloc_workqueue(name,
| ^~~~
.../rvu.c:2493:32: note: treat the string as an argument to avoid this
2493 | mw->mbox_wq = alloc_workqueue(name,
| ^
| "%s",
It is always the case where the contents of name is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only by author.
Tested-by: Geetha sowjanya <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
No need for the mask when there's already a macro for this.
Signed-off-by: Rosen Penev <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Siena hardware does not support custom RSS contexts, but when the
driver was forked from sfc.ko, some of the plumbing for them was
copied across from the common code. Actually trying to use them
would lead to EOPNOTSUPP as the relevant efx_nic_type methods were
not populated.
Remove this dead code from the Siena driver.
Signed-off-by: Edward Cree <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).
Signed-off-by: Vasileios Amoiridis <[email protected]>
Reviewed-by: Alvin Šipraga <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).
Reviewed-by: Alvin Šipraga <[email protected]>
Signed-off-by: Vasileios Amoiridis <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).
Signed-off-by: Vasileios Amoiridis <[email protected]>
Reviewed-by: Alvin Šipraga <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ncq_sense_buf buffer field of struct ata_port is allocated and used
only for devices that support the Command Duration Limits (CDL) feature.
However, the cdl buffer of struct ata_device, which is used to cache the
command duration limits log page for devices supporting CDL is always
allocated as part of struct ata_device, which is wasteful of memory for
devices that do not support this feature.
Clean this up by defining both buffers as part of the new ata_cdl
structure and allocating this structure only for devices that support
the CDL feature. This new structure is attached to struct ata_device
using the cdl pointer.
The functions ata_dev_init_cdl_resources() and
ata_dev_cleanup_cdl_resources() are defined to manage this new structure
allocation, initialization and freeing when a port is removed or a
device disabled. ata_dev_init_cdl_resources() is called from
ata_dev_config_cdl() only for devices that support CDL.
ata_dev_cleanup_cdl_resources() is called from ata_dev_free_resources()
to free the ata_cdl structure when a device is being disabled by EH.
Note that the name of the former cdl log buffer of struct ata_device is
changed to desc_log_buf to make it clearer that it is a buffer for the
limit descriptors log page.
This change reduces the size of struct ata_device, thus reducing memory
usage for ATA devices that do not support the CDL feature.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
|
|
Introduce the function ata_dev_free_resources() to free the resources
allocated to support a device features. For now, this function is
reduced to calling zpodd_exit() for devices that have this feature
enabled.
ata_dev_free_resources() is called from ata_eh_dev_disable() as this
function is always called for all devices attached to a port that is
being detached and for devices that are being disabled due to being
removed (detached) from the system or due to errors.
With this change, the call to zpodd_exit() done in ata_port_detach()
and ata_scsi_handle_link_detach() are removed as these functions
remove all devices attached to the link or port using libata EH, thus
resulting in ata_eh_dev_disable() being called and the zpodd_exit()
function being executed.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
|
|
The 512B buffer sector_buf field of struct ata_port is used for scanning
devices as well as during error recovery with ata EH. This buffer is
thus useless if a port does not have a device connected to it.
And also given that commands using this buffer are issued to devices,
and not to ports, move this buffer definition from struct ata_port to
struct ata_device.
This change slightly increases system memory usage for systems using a
port-multiplier as in that case we do not need a per-device buffer for
scanning devices (PMP does not allow parallel scanning) nor for EH (as
when entering EH we are guaranteed that all commands to all devices
connected to the PMP have completed or have been aborted). However,
this change reduces memory usage on systems that have many ports with
only few devices rives connected, which is a much more common use case
than the PMP use case.
Suggested-by: Niklas Cassel <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
|
|
The function ata_eh_read_sense_success_ncq_log() does more that just
reading the sense data for successful NCQ commands log page as it also
sets the sense data for all commands listed in the log page.
Rename this function to ata_eh_get_ncq_success_sense() to better
describe what the function does. Furthermore, since this function is
only called from ata_eh_get_success_sense() in libata-eh.c, there is no
need to export it and its declaration can be moved to
drivers/ata/libata.h.
To be consistent with this change, the function
ata_eh_read_sense_success_non_ncq() is also renamed to
ata_eh_get_non_ncq_success_sense().
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
|
|
Unlike ata_std_prereset() and ata_std_postreset(), the function
sata_std_hardreset() applies only to SATA devices, as its name implies.
So move its definition to libata-sata.c.
Together with this, also move the definition of sata_port_ops to
libata-sata.c, where it belongs.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
|
|
Move the definition of the function sata_down_spd_limit() to
libata-sata.c where it belongs, together with sata_set_spd().
The helper function ata_sstatus_online() is also changed to be an
inline function defined in drivers/ata/libata.h.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
|
|
The function __ata_qc_complete() is always called with a qc that already
has been dereferenced and so is guaranteed to be non-NULL (as otherwise
the kernel would have crashed). So remove the warning for a NULL qc as
it is useless.
Furthermore, the qc passed to __ata_qc_complete() must always be marked
as active with the ATA_QCFLAG_ACTIVE flag. If that is not the case, in
addition to the existing warning, return early so that we do not attempt
to complete an invalid qc.
Finally, fix the comment related to clearing the qc active flag as that
operation applies to all devices, not just ATAPI ones.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
|
|
A struct ata_device flags should always be set and cleared with the
device port locked. Testing for a flag should thus also be done while
holding the device port lock. In accordance to this principle, modify
ata_scsi_handle_link_detach() to test and clear the ATA_DFLAG_DETACHED
flag while holding the device port lock.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
|
|
Move the ATA link transport device related functions after the ATA
transport device related functions to avoid the need for forward
declaring ata_tdev_add() and ata_tdev_delete().
And while at it, do the following:
1) Change ata_is_ata_dev() and ata_is_link() to return a boolean
2) Fix a pointer declaration style in ata_is_ata_dev()
3) Improve the kdoc comments for ata_tdev_free(), ata_tdev_delete(),
ata_tdev_add(), ata_tlink_delete() and ata_tlink_add()
No functional changes are introduced by this cleanup.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <[email protected]>
Acked-by: Edward Cree <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <[email protected]>
Acked-by: Edward Cree <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Merge series from Andre Przywara <[email protected]>:
This is remainder of the AXP717 fix series, containing support for the
boost regulator. This is meant to increase the battery voltage to the 5
volts required to provide the USB VBUS power.
It's the usual trinity of DT bindings patch (1/3), the MFD part
describing the PMIC registers (2/3) and the final patch to model the
regulator (3/3).
Compared to v2, this drops the merged patches, and just retains the
boost related parts. It also changes the internal name of the register
to AXP717_MODULE_EN_CONTROL_2, since there is another control register
we will need later for battery support.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Unregister platform devices for child nodes when stopping a PCI
device, even if the PCI core has already cleared the OF_POPULATED bit
and of_platform_depopulate() doesn't do anything (Bartosz
Golaszewski)
- Rescan the bus from a separate thread so we don't deadlock when
triggering rescan from sysfs (Bartosz Golaszewski)
* tag 'pci-v6.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Rescan bus on a separate thread
PCI: Don't rely on of_platform_depopulate() for reused OF-nodes
|
|
Since commit a61ddb4393ad ("drm: enable (most) W=1 warnings by default
across the subsystem"), most of the extra warnings in the driver
Makefile are redundant. Remove them.
Note that -Wmissing-declarations and -Wmissing-prototypes are always
enabled by default in scripts/Makefile.extrawarn.
Reviewed-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
That is clearly not something we should do upstream. The SDMA is
mandatory for the driver to work correctly.
We could do this for emulation and bringup, but in those cases the
engineer should probably enabled CPU based updates manually.
This reverts commit 62eefd10ac1c7e976bda47ff311bd87cee40ab8d.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Indent the "break" statement one more tab.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Document how to use SMI system management interface to enable and
receive SVM events. Document SVM event triggers.
Define SVM events message string format macro that could be used by user
mode for sscanf to parse the event. Add it to uAPI header file to make
it obvious that is changing uAPI in future.
No functional changes.
Signed-off-by: Philip Yang <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Driver mode-2 is only supported by relative new
smc firmware.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If a queue is being destroyed but causes a HWS hang on removal, the KFD
may issue an unnecessary gpu reset if the destroyed queue can be fixed
by a queue reset.
This is because the queue has been removed from the KFD's queue list
prior to the preemption action on destroy so the reset call will fail to
match the HQD PQ reset information against the KFD's queue record to do
the actual reset.
To fix this, deactivate the queue prior to preemption since it's being
destroyed anyways and remove the queue from the KFD's queue list after
preemption.
Signed-off-by: Jonathan Kim <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enables users to update SVM's default granularity, used in
buffer migration and handling of recoverable page faults.
Param value is set in terms of log(numPages(buffer)),
e.g. 9 for a 2 MIB buffer
Signed-off-by: Ramesh Errabolu <[email protected]>
Reviewed-by: Philip Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initialize the queue type before resetting the queue using mmio.
Signed-off-by: Jesse Zhang <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|