| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
|
MTL/LNL use the same cdclk functions as RPLU albeit with different
tables. Having separate tables and not requiring special handling
for the platforms, reuse RPLU cdclk functions.
v2: Update subject and the commit message(Jani)
Cc: Gustavo Sousa <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: Radhakrishna Sripada <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- fix to make kunit_bus_type const
- kunit tool change to Print UML command
- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching from
using a platform_device, to a dedicated bus and device type used by
kunit. kunit devices don't set DMA mask and this caused regression on
some drm tests as they can't allocate DMA buffers. Fix this problem
by setting DMA masks on the kunit device during initialization.
- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit log
macros) already use the __printf() gcc attribute to ensure the format
specifiers are valid, but those which could fail the test, and hence
used __kunit_do_failed_assertion() behind the scenes, did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A nine-patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
* tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Annotate _MSG assertion variants with gnu printf specifiers
drm: tests: Fix invalid printf format specifiers in KUnit tests
drm/xe/tests: Fix printf format specifiers in xe_migrate test
net: test: Fix printf format specifier in skb_segment kunit test
rtc: test: Fix invalid format specifier.
time: test: Fix incorrect format specifier
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
lib/cmdline: Fix an invalid format specifier in an assertion msg
kunit: test: Log the correct filter string in executor_test
kunit: Setup DMA masks on the kunit device
kunit: make kunit_bus_type const
kunit: Mark filter* params as rw
kunit: tool: Print UML command
|
|
Add support for the Thermal Sensor/Chip Internal Voltage Monitor/Core
Voltage Monitor (THS/CIVM/CVM) on the Renesas R-Car V4M (R8A779H0) SoC.
The conversion formulas for R-Car V4M are the same as for other R-Car
Gen4 SoCs.
Based on a patch in the BSP by Duy Nguyen.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/bd5b002a802c1e058e0048592f17862db1d04263.1709722342.git.geert+renesas@glider.be
|
|
Currently, thermal zones associated with providers that have interrupts
for signaling hot/critical trips are required to set a polling-delay
of 0 to indicate no polling. This feels a bit backwards.
Change the code such that "no polling delay" also means "no polling".
Suggested-by: Bjorn Andersson <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
TMU Version 1 has 4 TTRCRs, while TMU Version >=2 has 16 TTRCRs.
So limit the len to 4 will report "invalid range data" for i.MX93.
This patch drop the local array with allocated ttrcr array and
able to support larger tmu ranges.
Fixes: f12d60c81fce ("thermal/drivers/qoriq: Support version 2.1")
Tested-by: Sascha Hauer <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently the sun8i thermal driver will fail to probe if any of the
thermal zones it is registering fails to register with the thermal core.
Since we currently do not define any trip points for the GPU thermal
zones on at least A64 or H5 this means that we have no thermal support
on these platforms:
[ 1.698703] thermal_sys: Failed to find 'trips' node
[ 1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1
even though the main CPU thermal zone on both SoCs is fully configured.
This does not seem ideal, while we may not be able to use all the zones
it seems better to have those zones which are usable be operational.
Instead just carry on registering zones if we get any non-deferral
error, allowing use of those zones which are usable.
This means that we also need to update the interrupt handler to not
attempt to notify the core for events on zones which we have not
registered, I didn't see an ability to mask individual interrupts and
I would expect that interrupts would still be indicated in the ISR even
if they were masked.
Reviewed-by: Vasily Khoruzhick <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add support for the thermal sensor found in H616 SoCs, is the same as
the H6 thermal sensor controller, but with four sensors.
Also the registers readings are wrong, unless a bit in the first SYS_CFG
register cleared, so set exercise the SRAM regmap to take care of that.
Signed-off-by: Martin Botka <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Vasily Khoruzhick <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The Allwinner H616 SoC needs to clear a bit in one register in the SRAM
controller, to report reasonable temperature values. On reset, bit 16 in
register 0x3000000 is set, which leads to the driver reporting
temperatures around 200C. Clearing this bit brings the values down to the
expected range. The BSP code does a one-time write in U-Boot, with a
comment just mentioning the effect on the THS, but offering no further
explanation.
To not rely on firmware to set things up for us, add code that queries
the SRAM controller device via a DT phandle link, then clear just this
single bit.
Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Vasily Khoruzhick <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The H616 SoC resembles the H6 thermal sensor controller, with a few
changes like four sensors.
Extend sun50i_h6_ths_calibrate() function to support calibration of
these sensors.
Co-developed-by: Martin Botka <[email protected]>
Signed-off-by: Martin Botka <[email protected]>
Signed-off-by: Maksim Kiselev <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Acked-by: Vasily Khoruzhick <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
So far we were ORing in some "unknown" value into the THS control
register on the Allwinner H6. This part of the register is not explained
in the H6 manual, but the H616 manual details those bits, and on closer
inspection the THS IP blocks in both SoCs seem very close:
- The BSP code for both SoCs writes the same values into THS_CTRL.
- The reset values of at least the first three registers are the same.
Replace the "unknown" value with its proper meaning: "acquire time",
most probably the sample part of the sample & hold circuit of the ADC,
according to its explanation in the H616 manual.
No functional change, just a macro rename and adjustment.
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Acked-by: Vasily Khoruzhick <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The Allwinner H616 SoC contains a mysterious bit at register offset 0x0
in the SRAM control block. If bit 16 is set (the reset value), the
temperature readings of the THS are way off, leading to reports about
200C, at normal ambient temperatures. Clearing this bits brings the
reported values down to the expected values.
The BSP code clears this bit in firmware (U-Boot), and has an explicit
comment about this, but offers no real explanation.
Experiments in U-Boot show that register 0x0 has no effect on the SRAM C
visibility: all tested bit settings still allow full read and write
access by the CPU to the whole of SRAM C. Only bit 24 of the register at
offset 0x4 makes all of SRAM C inaccessible by the CPU. So modelling
the THS switch functionality as an SRAM region would not reflect reality.
Since we should not rely on firmware settings, allow other code (the THS
driver) to access this register, by exporting it through the already
existing regmap. This mimics what we already do for the LDO control and
the EMAC register.
To avoid concurrent accesses to the same register at the same time, by
the SRAM switch code and the regmap code, use the same lock to protect
the access. The regmap subsystem allows to use an existing lock, so we
just need to hook in there.
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There is never a need to have a space before a TAB, but it hurts the
eyes of vim users.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/480478a53fd42621e97b2db36e181903cc0f53e3.1708001426.git.geert+renesas@glider.be
|
|
Reading thermal sensor on mt7986 devices returns invalid temperature:
bpi-r3 ~ # cat /sys/class/thermal/thermal_zone0/temp
-274000
Fix this by adding missing members in mtk_thermal_data struct which were
used in mtk_thermal_turn_on_buffer after commit 33140e668b10.
Cc: [email protected]
Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks")
Signed-off-by: Frank Wunderlich <[email protected]>
Reviewed-by: Markus Schneider-Pargmann <[email protected]>
Reviewed-by: Daniel Golle <[email protected]>
Tested-by: Daniel Golle <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
handling path
If devm_krealloc() fails, then 'efuse' is leaking.
So free it to avoid a leak.
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/481d345233862d58c3c305855a93d0dbc2bbae7e.1706431063.git.christophe.jaillet@wanadoo.fr
|
|
ioremap_page_range() should be used for ranges within vmalloc range only.
The vmalloc ranges are allocated by get_vm_area(). PCI has "resource"
allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence
introduce vmap_page_range() to be used exclusively to map pages
in PCI address space.
Fixes: 3e49a866c9dc ("mm: Enforce VM_IOREMAP flag and range in ioremap_page_range.")
Reported-by: Miguel Ojeda <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Tested-by: Miguel Ojeda <[email protected]>
Link: https://lore.kernel.org/bpf/CANiq72ka4rir+RTN2FQoT=Vvprp_Ao-CvoYEkSNqtSY+RZj+AA@mail.gmail.com
|
|
With dynamic load-balancing disabled on the compute side, there's no
reason left to enable WA 16015675438. Drop it from both PVC and DG2.
Note that this can be done because now the driver always set a fixed
partition of EUs during initialization via the ccs_mode configuration.
The flag to GuC is still needed because of 18020744125, so update
the comment accordingly.
Cc: Rodrigo Vivi <[email protected]>
Acked-by: Mateusz Jablonski <[email protected]>
Acked-by: Michal Mrozek <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
'ras/edac-amd-atl' into edac-updates-for-v6.9
* ras/edac-drivers:
EDAC/i10nm: Add Intel Grand Ridge micro-server support
EDAC/igen6: Add one more Intel Alder Lake-N SoC support
* ras/edac-misc:
EDAC/versal: Convert to platform remove callback returning void
EDAC/versal: Make the bit position of injected errors configurable
EDAC/synopsys: Convert to devm_platform_ioremap_resource()
* ras/edac-amd-atl:
RAS/AMD/FMPM: Fix off by one when unwinding on error
RAS/AMD/FMPM: Add debugfs interface to print record entries
RAS/AMD/FMPM: Save SPA values
RAS: Export helper to get ras_debugfs_dir
RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
RAS: Introduce a FRU memory poison manager
RAS/AMD/ATL: Add MI300 row retirement support
Documentation: Move RAS section to admin-guide
RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
RAS/AMD/ATL: Add MI300 support
Documentation: RAS: Add index and address translation section
EDAC/amd64: Use new AMD Address Translation Library
RAS: Introduce AMD Address Translation Library
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm
Merge OPP (operating performance points) updates for 6.9 from Viresh
Kumar:
"- Fix couple of warnings related to W=1 builds. (Viresh Kumar).
- Move Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg)."
* tag 'opp-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
|
|
Merge Enery Model changes for 6.9-rc1:
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
* pm-em: (24 commits)
PM: EM: Fix nr_states warnings in static checks
Documentation: EM: Update with runtime modification design
PM: EM: Add em_dev_compute_costs()
PM: EM: Remove old table
PM: EM: Change debugfs configuration to use runtime EM table data
drivers/thermal/devfreq_cooling: Use new Energy Model interface
drivers/thermal/cpufreq_cooling: Use new Energy Model interface
powercap/dtpm_devfreq: Use new Energy Model interface to get table
powercap/dtpm_cpu: Use new Energy Model interface to get table
PM: EM: Optimize em_cpu_energy() and remove division
PM: EM: Support late CPUs booting and capacity adjustment
PM: EM: Add performance field to struct em_perf_state and optimize
PM: EM: Add em_perf_state_from_pd() to get performance states table
PM: EM: Introduce em_dev_update_perf_domain() for EM updates
PM: EM: Add functions for memory allocations for new EM tables
PM: EM: Use runtime modified EM for CPUs energy estimation in EAS
PM: EM: Introduce runtime modifiable table
PM: EM: Split the allocation and initialization of the EM table
PM: EM: Check if the get_cost() callback is present in em_compute_costs()
PM: EM: Introduce em_compute_costs()
...
|
|
Merge power capping changes and power management utilities updates for
6.9-rc1:
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano).
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda).
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
* pm-powercap:
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
powercap: dtpm_cpu: Fix error check against freq_qos_add_request()
powercap: intel_rapl: Add support for Arrow Lake
powercap: intel_rapl: Add support for Lunar Lake-M paltform
powercap: intel_rapl_tpmi: Fix System Domain probing
powercap: intel_rapl_tpmi: Fix a register bug
powercap: intel_rapl: Fix locking in TPMI RAPL
powercap: intel_rapl: Fix a NULL pointer dereference
* pm-tools:
Fix cpupower-frequency-info.1 man page typo
tools/power x86_energy_perf_policy: Fix file leak in get_pkg_num()
|
|
Merge cpuidle updates for 6.9-rc1:
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle).
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng).
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang).
* pm-cpuidle:
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
cpuidle: Avoid potential overflow in integer multiplication
cpuidle: haltpoll: do not shrink guest poll_limit_ns below grow_start
|
|
Merge cpufreq changes for 6.9-rc1:
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
* pm-cpufreq: (28 commits)
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
cpufreq: intel_pstate: Allow model specific EPPs
cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency
cpufreq: dt-platdev: block SDM670 in cpufreq-dt-platdev
cpufreq: intel_pstate: remove cpudata::prev_cummulative_iowait
cpufreq: Change default transition delay to 2ms
cpufreq: amd-pstate: Fix min_perf assignment in amd_pstate_adjust_perf()
Documentation: PM: amd-pstate: Fix section title underline
Documentation: introduce amd-pstate preferrd core mode kernel command line options
Documentation: amd-pstate: introduce amd-pstate preferred core
cpufreq: amd-pstate: Update amd-pstate preferred core ranking dynamically
ACPI: cpufreq: Add highest perf change notification
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.9 from Viresh Kumar:
"- General enhancements / cleanups to cpufreq drivers (tianyu2, Nícolas
F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- scmi: get transition delay from firmware (Pierre Gondois)."
* tag 'cpufreq-arm-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency
cpufreq: dt-platdev: block SDM670 in cpufreq-dt-platdev
cpufreq: mediatek-hw: Don't error out if supply is not found
Documentation: power: Use kcalloc() instead of kzalloc()
cpufreq: mediatek-hw: Wait for CPU supplies before probing
cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value
cpufreq: imx6: use regmap to read ocotp register
|
|
Merge changes related to the runtime power management of devices for
6.9-rc1:
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
* pm-runtime:
Documentation: PM: Fix runtime_pm.rst markdown syntax
PM: runtime: add tracepoint for runtime_status changes
PM: runtime: Add pm_runtime_put_autosuspend() replacement
PM: runtime: Simplify pm_runtime_get_if_active() usage
|
|
Merge changes related to system-wide power management for 6.9-rc1:
- Fix and clean up system suspend statistics collection (Rafael
Wysocki).
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki).
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V).
- Fix PCI hibernation support description (Yiwei Lin).
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy).
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah).
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li).
* pm-sleep: (21 commits)
PM: sleep: wakeirq: fix wake irq warning in system suspend
PM: suspend: Set mem_sleep_current during kernel command line setup
PM: hibernate: Don't ignore return from set_memory_ro()
PM: hibernate: Support to select compression algorithm
Documentation: PM: Fix PCI hibernation support description
PM: hibernate: Add support for LZ4 compression for hibernation
PM: hibernate: Move to crypto APIs for LZO compression
PM: hibernate: Rename lzo* to make it generic
PM: sleep: Call dpm_async_fn() directly in each suspend phase
PM: sleep: Move devices to new lists earlier in each suspend phase
PM: sleep: Move some assignments from under a lock
PM: sleep: stats: Log errors right after running suspend callbacks
PM: sleep: stats: Use locking in dpm_save_failed_dev()
PM: sleep: stats: Call dpm_save_failed_step() at most once per phase
PM: sleep: stats: Define suspend_stats next to the code using it
PM: sleep: stats: Use unsigned int for success and failure counters
PM: sleep: stats: Use an array of step failure counters
PM: sleep: stats: Use array of suspend step names
PM: sleep: Relocate two device PM core functions
PM: sleep: Simplify dpm_suspended_list walk in dpm_resume()
...
|
|
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.9
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
- Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.9
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
|
|
Merge x86-specific ACPI changes, an ACPI backlight driver change, ACPI
APEI change and miscellaneous ACPI-related changes for 6.9-rc1:
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede).
- Make the ACPI backlight code handle fetching EDID that is longer than
256 bytes (Mario Limonciello).
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik).
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König).
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki).
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath).
* acpi-x86:
ACPI: x86: Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS
* acpi-video:
ACPI: video: Handle fetching EDID that is longer than 256 bytes
* acpi-apei:
ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
ACPI: APEI: GHES: Convert to platform remove callback returning void
* acpi-misc:
ACPI: pfr_update: Convert to platform remove callback returning void
ACPI: pfr_telemetry: Convert to platform remove callback returning void
ACPI: fan: Convert to platform remove callback returning void
ACPI: GED: Convert to platform remove callback returning void
ACPI: DPTF: Convert to platform remove callback returning void
ACPI: AGDI: Convert to platform remove callback returning void
ACPI: TAD: Convert to platform remove callback returning void
ACPI: Drop the custom_method debugfs interface
ACPI: use %pe for better readability of errors while printing
|
|
'acpi-thermal'
Merge ACPI tables parsing change, ACPI processor driver change, ACPI
device properties handling changes and an ACPI thermal code change for
6.9-rc1:
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf).
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus).
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King).
* acpi-tables:
ACPI: NFIT: Switch to use acpi_evaluate_dsm_typed()
* acpi-processor:
ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()
* acpi-property:
ACPI: property: Polish ignoring bad data nodes
ACPI: property: Ignore bad graph port nodes on Dell XPS 9315
ACPI: utils: Make acpi_handle_path() not static
* acpi-thermal:
ACPI: thermal_lib: Initialize temp_decik to zero
|
|
Merge ACPI device enumeration and bus type changes, ACPI power
management changes and ACPI IRQ override handling quirks for 6.9-rc1:
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki).
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki).
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki).
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu).
- Constify acpi_bus_type (Ricardo Marliere).
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki).
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye).
* acpi-scan:
ACPI: scan: Consolidate Device Check and Bus Check notification handling
ACPI: scan: Rework Device Check and Bus Check notification handling
ACPI: scan: Make acpi_processor_add() check the device enabled bit
ACPI: scan: Relocate acpi_bus_trim_one()
ACPI: scan: Fix device check notification handling
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
* acpi-bus:
ACPI: bus: make acpi_bus_type const
* acpi-pm:
ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems
* acpi-resource:
ACPI: resource: Use IRQ override on Maibenben X565
ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
ACPI: resource: Do IRQ override on Lunnen Ground laptops
ACPI: resource: Add IRQ override quirk for ASUS ExpertBook B2502FBA
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CVA
|
|
On QCA6390/QCN9074/WCN6855, MHISTATUS may still have SYSERR bit set
after SOC_GLOBAL_RESET.
Signed-off-by: Kevin Lo <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Pin and vmap are distinct operations. Do not perform a pin as part
of the vmap call. This used to be necessary to keep the fbdev buffer
in place while it is being updated. Fbdev emulation has meanwhile
been fixed to lock the buffer correctly. Same for vunmap.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Christian König <[email protected]>
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pin and vmap are distinct operations. Do not perform a pin as part
of the vmap call. This used to be necessary to keep the fbdev buffer
in place while it is being updated. Fbdev emulation has meanwhile
been fixed to lock the buffer correctly. Same for vunmap.
For refactoring the code, remove the pin calls from the helper's
vmap implementation in drm_gem_vram_vmap() and inline the call to
drm_gem_vram_kmap_locked(). This gives a vmap helper that only
maps the buffer object's memory pages without pinning or locking.
Do a similar refactoring for vunmap.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The function drm_client_buffer_vmap() establishes a long-term mapping
of the client's buffer object into the kernel address space. Make sure
that buffer does not move by pinning it to its current location. Same
for vunmap with unpin.
The only caller of drm_client_buffer_vmap() is fbdev-dma, which uses
gem-dma. As DMA-backed GEM buffers do not move, this change is for
correctness with little impact in practice.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Temporarily lock the fbdev buffer object during updates to prevent
memory managers from evicting/moving the buffer. Moving a buffer
object while update its content results in undefined behaviour.
Fbdev-generic updates its buffer object from a shadow buffer. Gem-shmem
and gem-dma helpers do not move buffer objects, so they are safe to be
used with fbdev-generic. Gem-vram and qxl are based on TTM, but pin
buffer objects are part of the vmap operation. So both are also safe
to be used with fbdev-generic.
Amdgpu and nouveau do not pin or lock the buffer object during an
update. Their TTM-based memory management could move the buffer object
while the update is ongoing.
The new vmap_local and vunmap_local helpers hold the buffer object's
reservation lock during the buffer update. This prevents moving the
buffer object on all memory managers.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Acquire the buffer object's reservation lock in drm_gem_pin() and
remove locking the drivers' GEM callbacks where necessary. Same for
unpin().
DRM drivers and memory managers modified by this patch will now have
correct dma-buf locking semantics: the caller is responsible for
holding the reservation lock when calling the pin or unpin callback.
DRM drivers and memory managers that are not modified will now be
protected against concurent invocation of their pin and unpin callbacks.
PRIME does not implement struct dma_buf_ops.pin, which requires
the caller to hold the reservation lock. It does implement struct
dma_buf_ops.attach, which requires to callee to acquire the
reservation lock. The PRIME code uses drm_gem_pin(), so locks
are now taken as specified. Same for unpin and detach.
The patch harmonizes GEM pin and unpin to have non-interruptible
reservation locking across all drivers, as is already the case for
vmap and vunmap. This affects gem-shmem, gem-vram, loongson, qxl and
radeon.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Acquire the reservation lock directly in GEM pin callback. Same for
unpin. Prepares for further changes.
Dma-buf locking semantics require callers to hold the buffer's
reservation lock when invoking the pin and unpin callbacks. Prepare
qxl accordingly by pushing locking out of the implementation. A
follow-up patch will fix locking for all GEM code at once.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Christian König <[email protected]>
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename __qxl_bo_pin() to qxl_bo_pin_locked() and update all callers.
The function will be helpful for implementing the GEM pin callback
with correct semantics. Same for __qxl_bo_unpin().
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Christian König <[email protected]>
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Acquire the reservation lock directly in GEM pin callback. Same for
unpin. Prepares for further changes.
Dma-buf locking semantics require callers to hold the buffer's
reservation lock when invoking the pin and unpin callbacks. Prepare
nouveau accordingly by pushing locking out of the implementation. A
follow-up patch will fix locking for all GEM code at once.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Christian König <[email protected]>
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement pinning without locking in nouveau_bo_pin_locked(). Keep
nouveau_bo_pin() for acquiring the buffer object's reservation lock.
The new helper will be useful for implementing the GEM pin callback
with correct semantics. Same for unpin.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Christian König <[email protected]>
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Export msm_gem_pin_pages_locked() and acquire the reservation lock
directly in GEM pin callback. Same for unpin. Prepares for further
changes.
Dma-buf locking semantics require callers to hold the buffer's
reservation lock when invoking the pin and unpin callbacks. Prepare
msm accordingly by pushing locking out of the implementation. A
follow-up patch will fix locking for all GEM code at once.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Christian König <[email protected]>
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename msm_gem_pin_pages_locked() to msm_gem_get_pages_locked(). The
function doesn't pin any pages, but only acquires them. Renaming the
function makes the old name available.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Christian König <[email protected]>
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Acquire the reservation lock directly in GEM pin callback. Same for
unpin. Prepares for further changes.
Dma-buf locking semantics require callers to hold the buffer's
reservation lock when invoking the pin and unpin callbacks. Prepare
gem-vram accordingly by pushing locking out of the implementation.
A follow-up patch will fix locking for all GEM code at once.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Export drm_gem_shmem_pin_locked() and acquire the reservation lock
directly in GEM pin callback. Same for unpin. Prepares for further
changes.
Dma-buf locking semantics require callers to hold the buffer's
reservation lock when invoking the pin and unpin callbacks. Prepare
gem-shmem accordingly by pushing locking out of the implementation.
A follow-up patch will fix locking for all GEM code at once.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # virtio-gpu
Acked-by: Christian König <[email protected]>
Acked-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Debugfs isn't always available in production builds that try to squeeze
every single byte out of the kernel image, but we still need a way to
toggle the timestamp and cycle counter registers so that jobs can be
profiled for fdinfo's drm engine and cycle calculations.
Drop the debugfs knob and replace it with a sysfs file that accomplishes
the same functionality, and document its ABI in a separate file.
Signed-off-by: Adrián Larumbe <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This reverts commit 674dc7f61aefea81901c21402946074927e63f1a.
The commit causes a recursive dependency in kconfig:
drivers/iommu/Kconfig:14:error: recursive dependency detected!
drivers/iommu/Kconfig:14: symbol IOMMU_SUPPORT is selected by DRM_PANTHOR
drivers/gpu/drm/panthor/Kconfig:3: symbol DRM_PANTHOR depends on PM
kernel/power/Kconfig:183: symbol PM is selected by PM_SLEEP
kernel/power/Kconfig:117: symbol PM_SLEEP depends on HIBERNATE_CALLBACKS
kernel/power/Kconfig:35: symbol HIBERNATE_CALLBACKS is selected by XEN_SAVE_RESTORE
arch/x86/xen/Kconfig:67: symbol XEN_SAVE_RESTORE depends on XEN
arch/x86/xen/Kconfig:6: symbol XEN depends on PARAVIRT
arch/x86/Kconfig:781: symbol PARAVIRT is selected by HYPERV
drivers/hv/Kconfig:5: symbol HYPERV depends on X86_LOCAL_APIC
arch/x86/Kconfig:1106: symbol X86_LOCAL_APIC depends on X86_UP_APIC
arch/x86/Kconfig:1081: symbol X86_UP_APIC prompt is visible depending on PCI_MSI
drivers/pci/Kconfig:39: symbol PCI_MSI is selected by AMD_IOMMU
drivers/iommu/amd/Kconfig:3: symbol AMD_IOMMU depends on IOMMU_SUPPORT
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
Fixes: 674dc7f61aef ("drm/panthor: Fix undefined panthor_device_suspend/resume symbol issue")
Cc: Boris Brezillon <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Steven Price <[email protected]>
Acked-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
Make debugfs vbt only shows valid vbt when read from ACPI opregion.
Make it work when read from firmware/spi/pci oprom cases. In the cases
where VBT needs to be read from spi/pci oprom, take the wakeref to
prevent WARN while reading DE registers during debugfs vbt dump.
v2: Extract getting vbt from different sources to its own function.
Protect sysfs write with vbt check(Jani)
v3: Fix CI error by probing bios vbt with runtime_pm wakeref
v4: Update commit message and skip waking up runtime while accessing
vbt from opregion/firmware(Jani)
v5: Skip grabbing unnecessary wakeref(Jani)
Cc: Jani Nikula <[email protected]>
Signed-off-by: Radhakrishna Sripada <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|