| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Makes sense to trigger this when the device is removed.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Make it clear that is about cleaning up the HW/FW side, and not software
state.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Here we are touching the HW/GuC and presumably this should happen when
the device is removed. Currently if you hotunplug the device this is
skipped if there is already open driver instance.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Make it clear that is about cleaning up the HW/FW side, and not software
state.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Make sure to actually call this when the device is removed. Currently we
only trigger it when the driver instance goes away, but that doesn't
work too well with hotunplug, since device can be removed and re-probed
with a new driver instance, where the guc_fini() is called too late.
Move the fini over to devm to ensure this is called when device is
removed.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1717
Signed-off-by: Matthew Auld <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Device can be hotunplugged before we start destroying gem objects. In
such a case don't touch the GGTT entries, trigger any invalidations or
mess around with rpm. This should already be taken care of when
removing the device, we just need to take care of dealing with the
software state, like removing the mm node.
v2: (Andrzej)
- Avoid some duplication by tracking the bound status and checking
that instead.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1717
Signed-off-by: Matthew Auld <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Reviewed-by: Jagmeet Randhawa <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Hotunplugging the device seems to result in stuff like:
kobject_add_internal failed for tile0 with -EEXIST, don't try to
register things with the same name in the same directory.
We only remove the sysfs as part of drmm, however that is tied to the
lifetime of the driver instance and not the device underneath. Attempt
to fix by using devm for all of the remaining sysfs stuff related to the
device.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1667
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1432
Signed-off-by: Matthew Auld <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This is quite broken since we are nuking the pdev link to the private
driver struct, but note here that driver_release is called when the
drm_device is released (poor mans drmm), which can be long after the
device has been removed. So here what we are actually doing is nuking
the pdev link for what is potentially bound to a different drm_device.
If that happens before our pci remove callback is triggered (for the new
drm_device) we silently exit and skip some important cleanup steps,
resulting in hilarity.
There should be no reason to implement driver_release, when we already
have nicer stuff like drmm, so just remove completely. The actual pdev
link is already nuked when removing the device.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Load Battlemage's DMC. We re-use XELPDP_DMC_MAX_FW_SIZE since BMG's
display is a derivative of Xe_LPD+ and has the same MMIO offset limits.
Reviewed-by: Dnyaneshwar Bhadane <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gustavo Sousa <[email protected]>
|
|
The GuC firmware is loaded and initialized by the PF driver. Make
sure VF drivers only perform permitted operations. For submission
initialization, use number of GuC context IDs from self config.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
While PF and native drivers may initialize submission code to use
all available GuC contexts IDs, the VF driver may only use limited
number of IDs. Update init function to accept number of context
IDs available for use.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We don't need <linux/delay.h> include since commit 5c09bd6ccd41
("drm/xe/mmio: Move xe_mmio_wait32() to xe_mmio.c").
We don't need <linux/io-64-nonatomic-lo-hi.h> include since commit
54c659660d63 ("drm/xe: Make xe_mmio_read|write() functions non-inline").
And since commit 924e6a9789a0 ("drm/xe/uapi: Remove MMIO ioctl")
we don't need forward declarations of drm_device and drm_file.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
These compilation units use udelay() or some GT oriented printk
functions without explicitly including proper header files, and
relying on #includes from the xe_mmio.h instead. Fix that.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This compilation unit uses udelay() function without including
it's header file. Fix that to break dependency on other code.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Jani Nikula <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Prefer forward declaration over #include xe_guc_pc_types.h
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Prefer forward declaration over #include xe_huc_types.h
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Prefer forward declaration over #include xe_gsc_types.h
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Prefer forward declaration over #include xe_uc_types.h
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Check mst_port field in intel_connector to check connector type
rather than rely on encoder as it may not be attached to connector
at times.
--v2
-Add closes tag [Imre]
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10898
Signed-off-by: Suraj Kandpal <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move assignment of aux after connector type check as port may not
exist if connector is not DPMST.
--v2
-Fix unwanted change in intel_encoder check [Jani]
Signed-off-by: Suraj Kandpal <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When the system power resumes, the TTL input of IT6505 may experience
some noise before the video signal stabilizes, necessitating a video
reset. This patch is implemented to prevent a loop of video error
interrupts, which can occur when a video reset in the video FIFO error
interrupt triggers another such interrupt. The patch processes the SCDT
and FIFO error interrupts simultaneously and ignores any video FIFO
error interrupts caused by a video reset.
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Kuro Chung <[email protected]>
Signed-off-by: Hermes Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit 62c1bff593b7 added an extra HZ along with msecs_to_jiffies.
This patch fixes that.
Cc: [email protected]
Fixes: 62c1bff593b7 ("net: mana: Configure hwc timeout from hardware")
Signed-off-by: Souradeep Chakrabarti <[email protected]>
Reviewed-by: Brett Creeley <[email protected]>
Reviewed-by: Dexuan Cui <[email protected]>
Link: https://lore.kernel.org/r/1716185104-31658-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Now that the PCI ID macros allow us to pass in the macro to use, stop
redefining INTEL_VGA_DEVICE.
Cc: Lucas De Marchi <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
The PCI ID macros in xe_pciids.h allow passing in the macro to operate
on each PCI ID, making it more flexible. Convert i915_pciids.h to the
same pattern.
INTEL_IVB_Q_IDS() for Quanta transcode remains a special case, and
unconditionally uses INTEL_QUANTA_VGA_DEVICE().
Cc: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Cc: Lucas De Marchi <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
Lan966x is adding ptp traps to redirect the ptp frames to the CPU such
that the HW will not forward these frames anywhere. The issue is that in
case ptp is not enabled and the timestamping source is et to
HWTSTAMP_SOURCE_NETDEV then these traps would not be removed on the
error path.
Fix this by removing the traps in this case as they are not needed.
Fixes: 54e1ed69c40a ("net: lan966x: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()")
Suggested-by: Vladimir Oltean <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: Horatiu Vultur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The whole point of the previous fixes has been to change the CCS
hardware configuration to generate only one stream available to
the compute users. We did this by changing the info.engine_mask
that is set during device probe, reset during the detection of
the fused engines, and finally reset again when choosing the CCS
mode.
We can't use the engine_mask variable anymore, as with the
current configuration, it imposes only one CCS no matter what the
hardware configuration is.
Before changing the engine_mask for the third time, save it and
use it for calculating the CCS mode.
After the previous changes, the user reported a performance drop
to around 1/4. We have tested that the compute operations, with
the current patch, have improved by the same factor.
Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload")
Signed-off-by: Andi Shyti <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Gnattu OC <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Matt Roper <[email protected]>
Tested-by: Jian Ye <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Tested-by: Gnattu OC <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v6.10-rc1:
- VM_BIND fix for nouveau.
- Lots of panthor fixes:
* Fixes for panthor's heap logical block.
* Reset on unrecoverable fault
* Fix VM references.
* Reset fix.
- xlnx compile and doc fixes.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Reported-by: Leon Weiß <[email protected]>
Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Harry Wentland <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Signed-off-by: Wayne Lin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)
|
|
Interruptible lock can return error and needed a return value
check. This test should finish quick enough so use a uninterruptible
lock instead.
Cc: Matthew Auld <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
|
|
Pull misc vfs updates from Al Viro:
"Assorted commits that had missed the last merge window..."
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove call_{read,write}_iter() functions
do_dentry_open(): kill inode argument
kernel_file_open(): get rid of inode argument
get_file_rcu(): no need to check for NULL separately
fd_is_open(): move to fs/file.c
close_on_exec(): pass files_struct instead of fdtable
|
|
At xe_pt_zap_ptes_entry() and xe_pt_stage_unbind_entry, the level cannot
be 0. Therefore, add an independent check for the level. Since the level
cannot be zero at this point, there is no need to check for `is_compact`,
so remove that instead.
Cc: Matthew Auld <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Switch read and write software bits for PUDs
- Add missing hardware bits for PUDs and PMDs
- Generate unwind information for C modules to fix GDB unwind error for
vDSO functions
- Create .build-id links for unstripped vDSO files to enable vDSO
debugging with symbols
- Use standard stack frame layout for vDSO generated stack frames to
manually walk stack frames without DWARF information
- Rework perf_callchain_user() and arch_stack_walk_user() functions to
reduce code duplication
- Skip first stack frame when walking user stack
- Add basic checks to identify invalid instruction pointers when
walking stack frames
- Introduce and use struct stack_frame_vdso_wrapper within vDSO user
wrapper code to automatically generate an asm-offset define. Also use
STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document
that the code works with user space stack
- Clear the backchain of the extra stack frame added by the vDSO user
wrapper code. This allows the user stack walker to detect and skip
the non-standard stack frame. Without this an incorrect instruction
pointer would be added to stack traces.
- Rewrite psw_idle() function in C to ease maintenance and further
enhancements
- Remove get_vtimer() function and use get_cpu_timer() instead
- Mark psw variable in __load_psw_mask() as __unitialized to avoid
superfluous clearing of PSW
- Remove obsolete and superfluous comment about removed TIF_FPU flag
- Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle
- Wipe sensitive data and all copies of protected- or secure-keys from
stack when an IOCTL fails
- Both do_airq_interrupt() and do_io_interrupt() functions set
CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code
- Provide iucv_alloc_device() and iucv_release_device() helpers, which
can be used to deduplicate more or less identical IUCV device
allocation and release code in four different drivers
- Make use of iucv_alloc_device() and iucv_release_device() helpers to
get rid of quite some code and also remove a cast to an incompatible
function (clang W=1)
- There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL
- __apply_alternatives() contains a runtime check which verifies that
the size of the to be patched code area is even. Convert this to a
compile time check
- Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands
from 128 to 240
- Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally
allowed
- Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of
IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL
block on 'scp_data' sysfs attribute update
- Initialize the correct fields of the NVMe dump block, which were
confused with FCP fields
- Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce
code duplication
- Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such
as dumpconf passing additional kernel command line parameters to a
stand-alone dumper
- Rework the CPACF query functions to use the correct RRE or RRF
instruction formats and set instruction register fields correctly
- Instead of calling BUG() at runtime force a link error during compile
when a unsupported opcode is used with __cpacf_query() or
__cpacf_check_opcode() functions
- Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
or /sys/bus/ap/aqmask sysfs file update with a relative mask value
- Fix "bindings complete" udev event which should be sent once all AP
devices have been bound to device drivers and again when unbind/bind
actions take place and all AP devices are bound again
- Facility list alt_stfle_fac_list is nowhere used in the decompressor,
therefore remove it there
- Remove custom kprobes insn slot allocator in favour of the standard
module_alloc() one, since kernel image and module areas are located
within 4GB
- Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
calling memset() with a large byte count and get rid of the sparse
warning as result
* tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390/zcrypt: Use kvcalloc() instead of kvmalloc_array()
s390/kprobes: Remove custom insn slot allocator
s390/boot: Remove alt_stfle_fac_list from decompressor
s390/ap: Fix bind complete udev event sent after each AP bus scan
s390/ap: Fix crash in AP internal function modify_bitmap()
s390/cpacf: Make use of invalid opcode produce a link error
s390/cpacf: Split and rework cpacf query functions
s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl
s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data'
s390/ipl: Fix incorrect initialization of nvme dump block
s390/ipl: Fix incorrect initialization of len fields in nvme reipl block
s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length
s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds
s390/alternatives: Convert runtime sanity check into compile time check
s390/iucv: Unexport iucv_root
tty: hvc-iucv: Make use of iucv_alloc_device()
s390/smsgiucv_app: Make use of iucv_alloc_device()
s390/netiucv: Make use of iucv_alloc_device()
s390/vmlogrdr: Make use of iucv_alloc_device()
s390/iucv: Provide iucv_alloc_device() / iucv_release_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
- Followup fix for the EFI boot sequence refactor, which may result in
physical KASLR putting the kernel in a region which is being used for
a special purpose via a command line argument.
* tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Omit physical KASLR when memory reservations exist
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM discard regressions due to DM core switching over to using
queue_limits_set() without DM core and targets first being updated to
set (and stack) discard limits in terms of max_hw_discard_sectors and
not max_discard_sectors
- Fix stable@ DM integrity discard support to set device's
discard_granularity limit to the device's logical block size
* tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: always manage discard support in terms of max_hw_discard_sectors
dm-integrity: set discard_granularity to logical block size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the amd-pstate driver and the operating performance point
(OPP) handling related to generic PM domains.
Specifics:
- Fix a memory leak in the exit path of amd-pstate (Peng Ma)
- Fix required_opp_tables handling in the cases when multiple generic
PM domains share one OPP table (Viresh Kumar)"
* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
OPP: Fix required_opp_tables for multiple genpds using same table
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
|
|
connector->mode_valid()
Make life easier for drivers by filtering out unwanted YCbCr 4:2:0
only modes prior to calling the connector->mode_valid() hook.
Currently drivers will still see YCbCr 4:2:0 only modes in said
hook, which will likely come as a suprise when the driver has
declared no support for such modes (via setting
connector->ycbcr_420_allowed to false).
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10992
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Daniel Vetter <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These make the ACPI EC driver always install the EC address space
handler at the root of the ACPI namespace which causes it to take care
of all EC operation regions everywhere.
This means that the custom EC address space handler in the WMI driver
is not needed any more and accordingly it gets removed altogether"
* tag 'acpi-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: wmi: Remove custom EC address space handler
ACPI: EC: Install address space handler at the namespace root
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the MediaTek lvts_thermal driver and the handling of trip
points that start as invalid and are adjusted later by user space via
sysfs.
Specifics:
- Fix and clean up the MediaTek lvts_thermal driver (Julien Panis)
- Prevent invalid trip point handling from triggering spurious trip
point crossing events and allow passive polling to stop when a
passive trip point involved in it becomes invalid (Rafael Wysocki)"
* tag 'thermal-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix the handling of invalid trip points
thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index
thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data
thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel
Pull intel-gpio fixes from Andy Shevchenko:
- NULL pointer dereference fix in GPIO APCI library
- Restore ACPI handle matching for GPIO devices represented in banks
* tag 'intel-gpio-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel:
gpiolib: acpi: Fix failed in acpi_gpiochip_find() by adding parent node match
gpiolib: acpi: Move ACPI device NULL check to acpi_can_fallback_to_crs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
soundwire: intel_ace2.x: add support for DOAISE property
soundwire: intel_ace2.x: add support for DODSE property
soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
soundwire: intel_ace2x: cleanup DOAIS/DODS settings
soundwire: intel_ace2x: simplify check_wake()
soundwire: intel_ace2x: fix wakeup handling
soundwire: intel_init: resume all devices on exit.
soundwire: intel: export intel_resume_child_device
soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
ASoC: SOF: Intel: hda: disable SoundWire interrupt later
soundwire: qcom: allow multi-link on newer devices
soundwire: intel_ace2x: use legacy formula for intel_alh_id
soundwire: reconcile dp0_prop and dpn_prop
soundwire: intel_ace2x: set the clock source
soundwire: intel_ace2.x: power-up first before setting SYNCPRD
soundwire: intel_ace2x: move and extend clock selection
soundwire: intel: add support for MeteorLake additional clocks
soundwire: intel: add more values for SYNCPRD
soundwire: bus: extend base clock checks to 96 MHz
soundwire: cadence: show the bus frequency and frame shape
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull generic phy updates from Vinod Koul:
"New HW Support:
- Support for Embedded DisplayPort and DisplayPort submodes and
driver support on Qualcomm X1E80100 edp driver
- Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
and eusb2-repeater for SMB2360
- Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
- Mediatek XFI T-PHY support for mt7988
- Rockchip usbdp combo phy driver
Updates:
- Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
swing tables
- Freescale imx8m-pci pcie link-up updates
- Rockchip rx-common-refclk-mode support
- More platform remove callback returning void conversions"
* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
phy: samsung-ufs: ufs: exit on first reported error
phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
phy: rockchip: fix CONFIG_TYPEC dependency
phy: rockchip: usbdp: fix uninitialized variable
phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
phy: rockchip: add usbdp combo phy driver
dt-bindings: phy: add rockchip usbdp combo phy document
phy: add driver for MediaTek XFI T-PHY
dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New HW support:
- Freescale i.MX8ULP edma support in edma driver
- StarFive JH8100 DMA support in Synopsis axi-dmac driver
Updates:
- Tracing support for freescale edma driver, updates to dpaa2 driver
- Remove unused QCom hidma DT support
- Support for i2c dma in imx-sdma
- Maintainers update for idxd and edma drivers"
* tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
MAINTAINERS: Update role for IDXD driver
dmaengine: fsl-edma: use _Generic to handle difference type
dmaengine: fsl-edma: add trace event support
dmaengine: idxd: Avoid unnecessary destruction of file_ida
dmaengine: xilinx: xdma: fix module autoloading
dt-bindings: dma: fsl-edma: allow 'power-domains' property
dt-bindings: dma: fsl-edma: remove 'clocks' from required
dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning
dmaengine: imx-sdma: Add i2c dma support
dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n>
dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dt-bindings: dma: Drop unused QCom hidma binding
dmaengine: qcom: Drop hidma DT support
dmaengine: pl08x: Use kcalloc() instead of kzalloc()
dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
dmaengine: fsl-edma: fix miss mutex unlock at an error return path
dmaengine: pch_dma: remove unused function chan2parent
dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- redo the omap driver from legacy to mailbox api
- enable bufferless IPI for zynqmp
- add mhu-v3 driver
- convert from tasklet to BH workqueue
- add qcom MSM8974 APCS compatible IDs
* tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (24 commits)
dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC
dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible
mailbox: Convert from tasklet to BH workqueue
mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown
mailbox: mtk-cmdq-mailbox: fix module autoloading
mailbox: zynqmp: handle SGI for shared IPI
mailbox: arm_mhuv3: Add driver
dt-bindings: mailbox: arm,mhuv3: Add bindings
mailbox: omap: Remove kernel FIFO message queuing
mailbox: omap: Reverse FIFO busy check logic
mailbox: omap: Remove mbox_chan_to_omap_mbox()
mailbox: omap: Use mbox_controller channel list directly
mailbox: omap: Use function local struct mbox_controller
mailbox: omap: Merge mailbox child node setup loops
mailbox: omap: Use devm_pm_runtime_enable() helper
mailbox: omap: Remove device class
mailbox: omap: Remove unneeded header omap-mailbox.h
mailbox: omap: Move fifo size check to point of use
mailbox: omap: Move omap_mbox_irq_t into driver
mailbox: omap: Remove unused omap_mbox_request_channel() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This makes the remoteproc core rproc_class const.
DeviceTree bindings for a few different Qualcomm remoteprocs are
updated to remove a range of validation warnings/errors. The Qualcomm
SMD binding marks qcom,ipc deprecated, in favor or the mailbox
interface.
The TI K3 R5 remoteproc driver is updated to ensure that cores are
powered up in the appropriate order. The driver also see a couple of
fixes related to cleanups in error paths during probe.
The Mediatek remoteproc driver is extended to support the MT8188 SCP
core 1. Support for varying DRAM and IPI shared buffer sizes are
introduced. This together with a couple of bug fixes and improvements
to the driver.
Support for the AMD-Xilinx Versal and Versal-NET platforms are added.
Coredump support and support for parsing TCM information from
DeviceTree is added to the Xilinx R5F remoteproc driver"
* tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated
remoteproc: k3-r5: Jump to error handling labels in start/stop errors
remoteproc: mediatek: Fix error code in scp_rproc_init()
remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs
remoteproc: k3-r5: Wait for core0 power-up before powering up core1
remoteproc: mediatek: Add IMGSYS IPI command
remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes
remoteproc: mediatek: Support MT8188 SCP core 1
dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP
drivers: remoteproc: xlnx: Fix uninitialized tcm mode
drivers: remoteproc: xlnx: Fix uninitialized variable use
drivers: remoteproc: xlnx: Add Versal and Versal-NET support
remoteproc: zynqmp: parse TCM from device tree
dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings
remoteproc: zynqmp: fix lockstep mode memory region
remoteproc: zynqmp: Add coredump support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This makes core rpmsg_class const and ensures that the automatic
module loading of the Qualcomm glink_ssr driver happens"
* tag 'rpmsg-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_glink_ssr: fix module autoloading
rpmsg: core: Make rpmsg_class constant
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
|
|
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Reported-by: Leon Weiß <[email protected]>
Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Harry Wentland <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Signed-off-by: Wayne Lin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev bd_inode updates from Al Viro:
"Replacement of bdev->bd_inode with sane(r) set of primitives by me and
Yu Kuai"
* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RIP ->bd_inode
dasd_format(): killing the last remaining user of ->bd_inode
nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
block/bdev.c: use the knowledge of inode/bdev coallocation
gfs2: more obvious initializations of mapping->host
fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
grow_dev_folio(): we only want ->bd_inode->i_mapping there
use ->bd_mapping instead of ->bd_inode->i_mapping
block_device: add a pointer to struct address_space (page cache of bdev)
missing helpers: bdev_unhash(), bdev_drop()
block: move two helpers into bdev.c
block2mtd: prevent direct access of bd_inode
dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
blkdev_write_iter(): saner way to get inode and bdev
bcachefs: remove dead function bdev_sectors()
ext4: remove block_device_ejected()
erofs_buf: store address_space instead of inode
erofs: switch erofs_bread() to passing offset instead of block number
|
|
The L3 bank mask is already generated and stored internally with
the rest of the GT topology. In user space, the compute runtime
now needs this information to be added to the device properties
therefore the topology mask query is extended to provide a new
mask which represents the L3 banks enabled on the GT.
The changes in the compute runtime are ready and approved, see
link below.
v2: Rewrite commit message and add a link to the compute
runtime PR (Francois Dugast)
Cc: Matt Roper <[email protected]>
Cc: Robert Krzemien <[email protected]>
Cc: Mateusz Jablonski <[email protected]>
Link: https://github.com/intel/compute-runtime/pull/722
Signed-off-by: Francois Dugast <[email protected]>
Acked-by: Mateusz Jablonski <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.
However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().
gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
struct dwapb_port_property *pp,
unsigned int offs);
port->gc.fwnode = pp->fwnode;
693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.
Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.
Fixes: 5062e4c14b75 ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1ea5ce ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Tested-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
|