| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The documentation has been update and is now at:
linux/Documentation/userspace-api/media/dvb/legacy_dvb_osd.rst
linux/Documentation/userspace-api/media/dvb/legacy_dvb_audio.rst
linux/Documentation/userspace-api/media/dvb/legacy_dvb_video.rst
The .rst files of the old documentation aren't necessary any more,
remove them.
Signed-off-by: Stefan Herdler <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-logitech-hidpp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The newly added file causes a ton of sparse warnings about the
incorrect use of __le32 and similar types:
drivers/hid/intel-ish-hid/ishtp/loader.h:41:23: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:42:27: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:43:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:44:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:45:22: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.c:172:33: warning: restricted __le32 degrades to integer
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: expected restricted __le32 [usertype] length
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: got unsigned long
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: expected restricted __le32 [usertype] fw_off
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: got unsigned int [usertype] offset
drivers/hid/intel-ish-hid/ishtp/loader.c:180:17: warning: cast from restricted __le32
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: warning: invalid assignment: +=
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: left side has type unsigned int
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: right side has type restricted __le32
Add the necessary conversions and use temporary variables where appropriate
to avoid converting back.
Fixes: 579a267e4617 ("HID: intel-ish-hid: Implement loading firmware from host feature")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Zhang Lixu <[email protected]>
Tested-by: Zhang Lixu <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
joycon_leds_create() has a ida_alloc() call. So if an error occurs after
it, a corresponding ida_free() call is needed, as already done in the
.remove function.
This is not 100% perfect, because if ida_alloc() fails, then
'ctlr->player_id' will forced to be U32_MAX, and an error will be logged
when ida_free() is called.
Considering that this can't happen in real life, no special handling is
done to handle it.
Fixes: 5307de63d71d ("HID: nintendo: use ida for LED player id")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Silvan Jegen <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Fix a memory leak on logi_dj_recv_send_report() error path.
Fixes: 6f20d3261265 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
There is no more in-kernel users of this function, and no driver should
ever be using it, so remove it from the kernel.
Acked-by: Dmitry Torokhov <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
UCSI version 2.0 and above define new PPM notifications. Update the
logic to determine which notifications to enable taking into account
these changes.
Signed-off-by: Diogo Ivo <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Newer UCSI versions defined additional optional capability bits. Add
their definitions.
Signed-off-by: Diogo Ivo <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The enable gpio is not required when the SBU mux is used only for
orientation, make it optional.
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Providing the number of known alternate modes allows user space to
determine when device registration has completed. Always register a
number of known alternate modes for the partner and cable plug, even
when the number of supported alternate modes is 0.
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Benson Leung <[email protected]>
Signed-off-by: Jameson Thies <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Delay the ucsi_check_altmodes task to be inline with surrounding partner
tasks. This allows partner, cable and identity discovery to complete
before alternate mode registration. With that order, alternate mode
discovery can be used to indicate the ucsi driver has completed
discovery.
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Benson Leung <[email protected]>
Signed-off-by: Jameson Thies <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When adding altmode ops, update the sysfs group so that visibility is
also recalculated.
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Benson Leung <[email protected]>
Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
Signed-off-by: Jameson Thies <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
ucsi_register_altmode checks IS_ERR for the alt pointer and treats
NULL as valid. When CONFIG_TYPEC_DP_ALTMODE is not enabled,
ucsi_register_displayport returns NULL which causes a NULL pointer
dereference in trace. Rather than return NULL, call
typec_port_register_altmode to register DisplayPort alternate mode
as a non-controllable mode when CONFIG_TYPEC_DP_ALTMODE is not enabled.
Reviewed-by: Benson Leung <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
Signed-off-by: Jameson Thies <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is no specific behaviour implemented to recover from a babble
error. When a BABBLE error happens, recovery fails as connected sticks
are no longer detected by the USB controller.
Implement the recover callback of the MUSB operation to reset the USB
controller when a BABBLE happens.
Signed-off-by: Bastien Curutchet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The idle_state is not meant for host-only mode. When the device acts as a
host, it fails to exit the idle state once entered. This prevents new
USB gadgets from being detected once plugged in.
Commit 032ec49f5351 ("usb: musb: drop useless board_mode usage") removed
a is_otg_enabled() check in the try_idle() that prevented from entering
idle_state. This was removed because at that time it was not possible to
select host-only mode with CONFIG_USB_MUSB_HOST so dual role was always
set.
Add #ifndef CONFIG_USB_MUSB_HOST around try_idle() callback to prevent
from entering idle_state when host-only mode has been selected.
Signed-off-by: Bastien Curutchet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 7ccf62941a38701ec9a42b4a0fa2868af456e96a.
da8xx_musb_set_mode() forces OTG mode regardless the selected mode even
if the property 'dr_mode = "host"' is present in device-tree. This
causes an unrecoverable error when VBUS supply is shut down : plugged
gadgets are no longer detected once VBUS supply is back.
Reverting it allows to have a selected mode coherent with device-tree's
description. IMO, this shouldn't cause regression because OTG mode is
the default selection when 'dr_mode' property is not set.
Signed-off-by: Bastien Curutchet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Runtime PM is not supported while USB PHY can be turned off from
register accesses.
Add runtime PM for the USB2.0 PHY. The PHY is entirely shut down to save
as much power as possible. This means that gadgets will not be discovered
once suspend state is entered, and suspend state can not be left without
an explicit user intervention (through sysfs). That's why runtime PM is
disabled by default.
Signed-off-by: Bastien Curutchet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A USB-C hard reset involves removing the voltage from VBUS for some
time. So basically it has the same effect as removing the USB-C plug
for a short moment. If the machine is powered from the USB-C port and
does not have a fallback supply (e.g. a battery), this will result in
a full machine reset due to power loss.
Ideally we want to avoid triggering a hard reset on these boards. A
non-working USB-C port is probably better than unplanned reboots. But
boards with a backup supply should do the hard reset to get everything
working again.
In theory it would be enough to check the self_powered property, but
it seems the property might not be configured consistently enough in
system firmwares.
So let's start with just printing an error message when a hard reset is
triggered on systems we expect to be affected. This at least makes
debugging issues on affected systems easier without impacting unaffected
systems too much.
Signed-off-by: Sebastian Reichel <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When the Linux Type-C controller drivers probe, they requests a soft
reset, which should result in the source restarting to send Source
Capability messages again independently of the previous state.
Unfortunately some USB PD sources do not follow the specification and
do not send them after a soft reset when they already negotiated a
specific contract before. The current way (and what is described in the
specificiation) to resolve this problem is triggering a hard reset.
But a hard reset is fatal on batteryless platforms powered via USB-C PD,
since that removes VBUS for some time. Since this is triggered at boot
time, the system will be stuck in a boot loop. Examples for platforms
affected by this are the Radxa Rock 5B or the Libre Computer Renegade
Elite ROC-RK3399-PC.
Instead of directly trying a hard reset when no Source Capability
message is send by the USB-PD source automatically, this changes the
state machine to try explicitly asking for the capabilities by sending
a Get Source Capability control message.
For me this solves issues with 2 different USB-PD sources - a RAVPower
powerbank and a Lemorele USB-C dock. Every other PD source I own
follows the specification and automatically sends the Source Capability
message after a soft reset, which works with or without this change.
I decided against making this extra step limited to devices not having
the self_powered flag set, since I don't see any huge drawbacks in this
approach and it keeps the logic simpler. The worst case scenario would
be a power source, which is really stuck. In that case the hard reset
is delayed by another 310ms.
Signed-off-by: Sebastian Reichel <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The musb driver core already supports external vbus control for ULPI
PHYs, but none of the drivers actually enable it. A customer reported
needing this for their device, and now that a DT property for detecting
this configuration exists, read the property to enable the feature.
Signed-off-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240531-spilt-garage-ed2113d628e8@wendy
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
'ehci_dbg_port' is unused in oxu210hp-hcd.c since it's original
commit b92a78e582b1 ("usb host: Oxford OXU210HP HCD driver.")
when it was in a separate header.
Remove it.
Note, that this structure, and some others in the driver
are mostly clones of include/linux/usb/ehci_def.h.
Someone with the hardware to be able to test it might
be able to remove a lot more structs as well and just
use that header.
Signed-off-by: "Dr. David Alan Gilbert" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Newer UCSI versions defined additional notification bits that can be
enabled by the PPM. Add their definitions and convert all definitions
to BIT_ULL() as we now cross the 32-bit boundary.
Signed-off-by: Diogo Ivo <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/3filrg6mbh6m3galir7ew5juakd25uvksimr7mqd7uc5td3xza@fdvxcewozqeh
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
iommu enabled
When using dma_map_sg() to map the scatterlist with iommu enabled,
the entries in the scatterlist can be mergerd into less but longer
entries in the function __finalise_sg(). So that the number of
valid mapped entries is actually smaller than ureq->num_reqs,and
there are still some invalid entries in the scatterlist with
dma_addr=0xffffffff and len=0. Writing these invalid sg entries
into the dma_desc can cause a data transmission error.
The function dma_map_sg() returns the number of valid map entries
and the return value is assigned to usb_request::num_mapped_sgs in
function usb_gadget_map_request_by_dev(). So that just write valid
mapped entries into dma_desc according to the usb_request::num_mapped_sgs,
and set the IOC bit if it's the last valid mapped entry.
This patch poses no risk to no-iommu situation, cause
ureq->num_mapped_sgs equals ureq->num_sgs while using dma_direct_map_sg()
to map the scatterlist whith iommu disabled.
Signed-off-by: Peng Hongchi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
TI USB2 PHY is known to have a lockup issue on very short
suspend intervals. Enable the Suspend Residency quirk flag to
workaround this as described in Errata i2409 [1].
[1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Ravi Gunasekaran <[email protected]>
Acked-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Some platforms (e.g. ti,j721e-usb, ti,am64-usb) require
this bit to be set to workaround a lockup issue with PHY
short suspend intervals [1]. Add a platform quirk flag
to indicate if Suspend Residency should be enabled.
[1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf
i2409 - USB: USB2 PHY locks up due to short suspend
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Ravi Gunasekaran <[email protected]>
Acked-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Skip submitting URBs, when identical requests were already sent in
tweak_special_requests(). Instead call the completion handler directly
to return the result of the URB.
Even though submitting those requests twice should be harmless, there
are USB devices that react poorly to some duplicated requests.
One example is the ChipIdea controller implementation in U-Boot: The
second SET_CONFIGURATION request makes U-Boot disable and re-enable all
endpoints. Re-enabling an endpoint in the ChipIdea controller, however,
was broken until U-Boot commit b272c8792502 ("usb: ci: Fix gadget
reinit").
Signed-off-by: Simon Holesch <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Reviewed-by: Hongren Zheng <[email protected]>
Tested-by: Hongren Zheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Current storage scan delay is reduced by the following old commit.
a4a47bc03fe5 ("Lower USB storage settling delay to something more reasonable")
It means that delay is at least 'one second', or zero with delay_use=0.
'one second' is still long delay especially for embedded system but
when delay_use is set to 0 (no delay), still error observed on some USB drives.
So delay_use should not be set to 0 but 'one second' is quite long.
Especially for embedded system, it's important for end user
how quickly access to USB drive when it's connected.
That's why we have a chance to minimize such a constant long delay.
This patch optimizes scan delay more precisely
to minimize delay time but not to have any problems on USB drives
by extending module parameter 'delay_use' in milliseconds internally.
The parameter 'delay_use' optionally supports in milliseconds
if it ends with 'ms'.
It makes the range of value to 1 / 1000 in internal 32-bit value
but it's still enough to set the delay time.
By default, delay time is 'one second' for backward compatibility.
For example, it seems to be good by changing delay_use=100ms,
that is 100 millisecond delay without issues for most USB pen drives.
Signed-off-by: Norihiko Hama <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In function nb7vpq904m_parse_data_lanes_mapping(), the "if (ep)"
condition is basically the entire function. Making the code a bit more
readable by inverting the condition so that the function returns
immediately if there is no "ep".
Signed-off-by: R Sundar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The member "uzonesize" of struct alauda_info will remain 0
if alauda_init_media() fails, potentially causing divide errors
in alauda_read_data() and alauda_write_lba().
- Add a member "media_initialized" to struct alauda_info.
- Change a condition in alauda_check_media() to ensure the
first initialization.
- Add an error check for the return value of alauda_init_media().
Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support")
Reported-by: xingwei lee <[email protected]>
Reported-by: yue sun <[email protected]>
Reviewed-by: Alan Stern <[email protected]>
Signed-off-by: Shichao Lai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It is possible that also the GET_ERROR command fails. If
that happens, the command completion still needs to be
acknowledged. Otherwise the interface will be stuck until
it's reset.
Reported-by: Ammy Yi <[email protected]>
Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API")
Cc: [email protected]
Signed-off-by: Heikki Krogerus <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
After commit 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH
workqueue"), usb_giveback_urb_bh() runs in the BH workqueue with
interrupts enabled.
Thus, the remote coverage collection section in usb_giveback_urb_bh()->
__usb_hcd_giveback_urb() might be interrupted, and the interrupt handler
might invoke __usb_hcd_giveback_urb() again.
This breaks KCOV, as it does not support nested remote coverage collection
sections within the same context (neither in task nor in softirq).
Update kcov_remote_start/stop_usb_softirq() to disable interrupts for the
duration of the coverage collection section to avoid nested sections in
the softirq context (in addition to such in the task context, which are
already handled).
Reported-by: Tetsuo Handa <[email protected]>
Closes: https://lore.kernel.org/linux-usb/[email protected]/
Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2
Suggested-by: Alan Stern <[email protected]>
Fixes: 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue")
Cc: [email protected]
Acked-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Similar to what fixed in Commit a6fe37f428c1 ("usb: typec: tcpm: Skip
hard reset when in error recovery"), the handling of the received Hard
Reset has to be skipped during TOGGLING state.
[ 4086.021288] VBUS off
[ 4086.021295] pending state change SNK_READY -> SNK_UNATTACHED @ 650 ms [rev2 NONE_AMS]
[ 4086.022113] VBUS VSAFE0V
[ 4086.022117] state change SNK_READY -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 4086.022447] VBUS off
[ 4086.022450] state change SNK_UNATTACHED -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 4086.023060] VBUS VSAFE0V
[ 4086.023064] state change SNK_UNATTACHED -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 4086.023070] disable BIST MODE TESTDATA
[ 4086.023766] disable vbus discharge ret:0
[ 4086.023911] Setting usb_comm capable false
[ 4086.028874] Setting voltage/current limit 0 mV 0 mA
[ 4086.028888] polarity 0
[ 4086.030305] Requesting mux state 0, usb-role 0, orientation 0
[ 4086.033539] Start toggling
[ 4086.038496] state change SNK_UNATTACHED -> TOGGLING [rev2 NONE_AMS]
// This Hard Reset is unexpected
[ 4086.038499] Received hard reset
[ 4086.038501] state change TOGGLING -> HARD_RESET_START [rev2 HARD_RESET]
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: [email protected]
Signed-off-by: Kyle Tso <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There could be a potential use-after-free case in
tcpm_register_source_caps(). This could happen when:
* new (say invalid) source caps are advertised
* the existing source caps are unregistered
* tcpm_register_source_caps() returns with an error as
usb_power_delivery_register_capabilities() fails
This causes port->partner_source_caps to hold on to the now freed source
caps.
Reset port->partner_source_caps value to NULL after unregistering
existing source caps.
Fixes: 230ecdf71a64 ("usb: typec: tcpm: unregister existing source caps before re-registration")
Cc: [email protected]
Signed-off-by: Amit Sunil Dhamne <[email protected]>
Reviewed-by: Ondrej Jirman <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If no other USB HCDs are selected when compiling a small pure virutal
machine, the Xen HCD driver cannot be built.
Fix it by traversing down host/ if CONFIG_USB_XEN_HCD is selected.
Fixes: 494ed3997d75 ("usb: Introduce Xen pvUSB frontend (xen hcd)")
Cc: [email protected] # v5.17+
Signed-off-by: John Ernberg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The new X Elite (x1e80100) platform has three ports so increase the
maximum so that all ports can be registered.
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
'gates_data' (and it's associated define) are unused since
commit ee38b2698ae2 ("clk: sunxi: Add a simple gates driver").
Remove them.
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>
|
|
This reverts commit 22ffd399e6e7aa18ae0314278ed0b7f05f8ab679.
People report this commit causes the driver defer probed, and never
back to work[1][2].
[1] https://lore.kernel.org/lkml/20240407011913.GA168730@nchen-desktop/T/#mc2b93bc11a8b01ec7cd0d0bf6b0b03951d9ef751
[2] https://lore.kernel.org/lkml/20240407011913.GA168730@nchen-desktop/T/#me87d9a2a76c07619d83b3879ea14780da89fbbbf
Cc: Michael Grzeschik <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Wouter Franken <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sunxi-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/suniv-f1c100s-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun20i-d1-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun20i-d1-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a64-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a100-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-a100-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h6-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h6-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun50i-h616-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun4i-a10-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun6i-a31-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun6i-rtc-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a23-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a33-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-a83t-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-h3-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-r40-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-v3s-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-de2-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun8i-r-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-de-ccu.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/sunxi-ng/sun9i-a80-usb-ccu.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Chen-Yu Tsai <[email protected]>
|
|
The number of irqs is computed to allocate the right amount of memory for
the irq data. An array of struct tps6594_regulator_irq_data is allocated
one time for all the irqs. Each irq uses one cell of the array.
If the computed number of irqs is not correct, not allocated memory could
be used.
Fix the values used in the calculation for TPS6594 and TPS65224.
Fixes: 00c826525fba (regulator: tps6594-regulator: Add TI TPS65224 PMIC regulators)
Signed-off-by: Thomas Richard <[email protected]>
Tested-by: Nishanth Menon <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
syzbot is reporting lockdep warning upon
int disc = 7;
ioctl(open("/dev/ttyS3", O_RDONLY), TIOCSETD, &disc);
sequence. Do like what commit 5f1149d2f4bf ("serial: drop debugging
WARN_ON_ONCE() from uart_put_char()") does.
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=f78380e4eae53c64125c
Signed-off-by: Tetsuo Handa <[email protected]>
Acked-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit d49216438139
("serial: sc16is7xx: split into core and I2C/SPI parts (core)")
removed Kconfig SPI_MASTER or I2C dependency for SERIAL_SC16IS7XX (core).
This removal was done because I inadvertently misinterpreted some review
comments.
Because of that, the driver question now pops up if both I2C and
SPI_MASTER are disabled.
Re-add Kconfig SPI_MASTER or I2C dependency to fix the problem.
Suggested-by: Geert Uytterhoeven <[email protected]>
Fixes: d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)")
Signed-off-by: Hugo Villeneuve <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit d49216438139
("serial: sc16is7xx: split into core and I2C/SPI parts (core)")
renamed SERIAL_SC16IS7XX_CORE by SERIAL_SC16IS7XX. This means that some
configs should have been updated when I submitted the original patch, but
unfortunately they were not. Geert mentioned for example:
arch/mips/configs/cu1??0-neo_defconfig
Rename SERIAL_SC16IS7XX to SERIAL_SC16IS7XX_CORE so that existing configs
will still work correctly.
Suggested-by: Geert Uytterhoeven <[email protected]>
Fixes: d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)")
Signed-off-by: Hugo Villeneuve <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Recently, suspend testing on sc7180-trogdor based devices has started
to sometimes fail with messages like this:
port a88000.serial:0.0: PM: calling pm_runtime_force_suspend+0x0/0xf8 @ 28934, parent: a88000.serial:0
port a88000.serial:0.0: PM: dpm_run_callback(): pm_runtime_force_suspend+0x0/0xf8 returns -16
port a88000.serial:0.0: PM: pm_runtime_force_suspend+0x0/0xf8 returned -16 after 33 usecs
port a88000.serial:0.0: PM: failed to suspend: error -16
I could reproduce these problems by logging in via an agetty on the
debug serial port (which was _not_ used for kernel console) and
running:
cat /var/log/messages
...and then (via an SSH session) forcing a few suspend/resume cycles.
Tracing through the code and doing some printf()-based debugging shows
that the -16 (-EBUSY) comes from the recently added
serial_port_runtime_suspend().
The idea of the serial_port_runtime_suspend() function is to prevent
the port from being _runtime_ suspended if it still has bytes left to
transmit. Having bytes left to transmit isn't a reason to block
_system_ suspend, though. If a serdev device in the kernel needs to
block system suspend it should block its own suspend and it can use
serdev_device_wait_until_sent() to ensure bytes are sent.
The DEFINE_RUNTIME_DEV_PM_OPS() used by the serial_port code means
that the system suspend function will be pm_runtime_force_suspend().
In pm_runtime_force_suspend() we can see that before calling the
runtime suspend function we'll call pm_runtime_disable(). This should
be a reliable way to detect that we're called from system suspend and
that we shouldn't look for busyness.
Fixes: 43066e32227e ("serial: port: Don't suspend if the port is still busy")
Cc: [email protected]
Reviewed-by: Tony Lindgren <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/20240531080914.v3.1.I2395e66cf70c6e67d774c56943825c289b9c13e4@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The FIFO is 64 bytes, but the FCR is configured to fire the TX interrupt
when the FIFO is half empty (bit 3 = 0). Thus, we should only write 32
bytes when a TX interrupt occurs.
This fixes a problem observed on the PXA168 that dropped a bunch of TX
bytes during large transmissions.
Fixes: ab28f51c77cd ("serial: rewrite pxa2xx-uart to use 8250_core")
Signed-off-by: Doug Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit d9666dfb314e1ffd6eb9c3c4243fe3e094c047a7.
The container of the struct dw8250_port_data is private to the actual
driver. In particular, 8250_lpss and 8250_dw use different data types
that are assigned to the UART port private_data. Hence, it must not
be used outside the specific driver.
Fix the mistake made in the past by moving the respective definitions
to the specific driver.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The container of the struct dw8250_port_data is private to the actual
driver. In particular, 8250_lpss and 8250_dw use different data types
that are assigned to the UART port private_data. Hence, it must not
be used outside the specific driver.
Currently the only cpr_val is required by the common code, make it
be available via struct dw8250_port_data.
This fixes the UART breakage on Intel Galileo boards.
Fixes: 593dea000bc1 ("serial: 8250: dw: Allow to use a fallback CPR value if not synthesized")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When lookahead has "consumed" some characters (la_count > 0),
n_tty_receive_buf_standard() and n_tty_receive_buf_closing() for
characters beyond the la_count are given wrong cp/fp offsets which
leads to duplicating and losing some characters.
If la_count > 0, correct buffer pointers and make count consistent too
(the latter is not strictly necessary to fix the issue but seems more
logical to adjust all variables immediately to keep state consistent).
Reported-by: Vadym Krevs <[email protected]>
Fixes: 6bb6fa6908eb ("tty: Implement lookahead to process XON/XOFF timely")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218834
Tested-by: Vadym Krevs <[email protected]>
Cc: [email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Extract platform driver to a separate module for better maintenance
and to reduce churn on 8250_core part changes when it's solely related
to the former. No functional changes intended.
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Sunil V L <[email protected]>
Tested-by: Sunil V L <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Extract RSA bits to a separate module for better maintenance
and to reduce a churn on 8250_core part changes when it's solely
related to the former. No functional changes intended.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
struct imx_port does have a struct uart_port as its first member, so
the current code works, but it is not how kernel code is usually
written.
Similar to many other serial drivers, introduce and use a
to_imx_port() helper based on container_of(). No functional change.
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|