| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
TSO currently fails when the skb's gso_type field has more than one bit
set.
TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a
few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes
virtualization, such as QEMU, a real use-case.
The gso_type and gso_size fields as passed from userspace in
virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type
|= SKB_GSO_DODGY to force the packet to enter the software GSO stack
for verification.
This issue might similarly come up when the CWR bit is set in the TCP
header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit
to be set.
Fixes: a57e5de476be ("gve: DQO: Add TX path")
Signed-off-by: Joshua Washington <[email protected]>
Reviewed-by: Praveen Kaligineedi <[email protected]>
Reviewed-by: Harshitha Ramamurthy <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Suggested-by: Eric Dumazet <[email protected]>
Acked-by: Andrei Vagin <[email protected]>
v2 - Remove unnecessary comments, remove line break between fixes tag
and signoffs.
v3 - Add back unrelated empty line removal.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ec_read_version_supported() uses ec_params_get_cmd_versions_v1 but it
wrongly uses message version 0.
Fix it.
Fixes: e86264595225 ("mfd: cros_ec: add debugfs, console log file")
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tzung-Bi Shih <[email protected]>
|
|
Since commit 106d67398233 ("platform/chrome: cros_ec_proto: Upgrade
get_next_event to v3"), (struct cros_ec_device *)->event_data becomes
struct ec_response_get_next_event_v3.
Update the Kunit test for fixing the following error:
> Expected mock->msg.insize == sizeof(union ec_response_get_next_data_v1), but
> mock->msg.insize == 18 (0x12)
> sizeof(union ec_response_get_next_data_v1) == 16 (0x10)
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tzung-Bi Shih <[email protected]>
|
|
The vrf driver has its own dstats-to-rtnl_link_stats64 collection, but
we now have a generic implementation for dstats collection, so switch to
this.
In doing so, we fix a minor issue where the (non-percpu)
dev->stats->tx_errors value was never collected into rtnl_link_stats64,
as the generic dev_get_dstats64() consumes the starting values from
dev->stats.
Signed-off-by: Jeremy Kerr <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The pcpu_sw_netstats and pcpu_lstats structs both contain a set of
u64_stats_t fields for individual stats, but pcpu_dstats uses u64s
instead.
Make this consistent by using u64_stats_t across all stats types.
The per-cpu dstats are only used by the vrf driver at present, so update
that driver as part of this change.
Signed-off-by: Jeremy Kerr <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to
the HBA if a read or write command directed at an ATA device should be
translated to an NCQ read/write command with the high prioiryt bit set
when the request uses the RT priority class and the user has enabled NCQ
priority through sysfs.
However, unlike the mpt3sas driver, the mpi3mr driver does not define
the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so
the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never
actually set and NCQ Priority cannot ever be used.
Fix this by defining these missing atributes to allow a user to check if
an ATA device supports NCQ priority and to enable/disable the use of NCQ
priority. To do this, lift the function scsih_ncq_prio_supp() out of the
mpt3sas driver and make it the generic SCSI SAS transport function
sas_ata_ncq_prio_supported(). Nothing in that function is hardware
specific, so this function can be used in both the mpt3sas driver and
the mpi3mr driver.
Reported-by: Scott McCoy <[email protected]>
Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/scsi_common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/advansys.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/BusLogic.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/aha1740.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/isci/isci.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/elx/efct.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/atp870u.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/ppa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/imm.o
Add all missing invocations of the MODULE_DESCRIPTION() macro.
This updates all files which have a MODULE_LICENSE() but which do not have
a MODULE_DESCRIPTION(), even ones which did not produce the x86
allmodconfig warnings.
Acked-by: Finn Thain <[email protected]>
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
In ufshcd_clock_scaling_prepare(), after SCSI layer is blocked,
ufshcd_pending_cmds() is called to check whether there are pending
transactions or not. And only if there are no pending transactions can we
proceed to kickstart the clock scaling sequence.
ufshcd_pending_cmds() traverses over all SCSI devices and calls
sbitmap_weight() on their budget_map. sbitmap_weight() can be broken down
to three steps:
1. Calculate the nr outstanding bits set in the 'word' bitmap.
2. Calculate the nr outstanding bits set in the 'cleared' bitmap.
3. Subtract the result from step 1 by the result from step 2.
This can lead to a race condition as outlined below:
Assume there is one pending transaction in the request queue of one SCSI
device, say sda, and the budget token of this request is 0, the 'word' is
0x1 and the 'cleared' is 0x0.
1. When step 1 executes, it gets the result as 1.
2. Before step 2 executes, block layer tries to dispatch a new request to
sda. Since the SCSI layer is blocked, the request cannot pass through
SCSI but the block layer would do budget_get() and budget_put() to
sda's budget map regardless, so the 'word' has become 0x3 and 'cleared'
has become 0x2 (assume the new request got budget token 1).
3. When step 2 executes, it gets the result as 1.
4. When step 3 executes, it gets the result as 0, meaning there is no
pending transactions, which is wrong.
Thread A Thread B
ufshcd_pending_cmds() __blk_mq_sched_dispatch_requests()
| |
sbitmap_weight(word) |
| scsi_mq_get_budget()
| |
| scsi_mq_put_budget()
| |
sbitmap_weight(cleared)
...
When this race condition happens, the clock scaling sequence is started
with transactions still in flight, leading to subsequent hibernate enter
failure, broken link, task abort and back to back error recovery.
Fix this race condition by quiescing the request queues before calling
ufshcd_pending_cmds() so that block layer won't touch the budget map when
ufshcd_pending_cmds() is working on it. In addition, remove the SCSI layer
blocking/unblocking to reduce redundancies and latencies.
Fixes: 8d077ede48c1 ("scsi: ufs: Optimize the command queueing code")
Co-developed-by: Can Guo <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Ziqi Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
For SCSI devices supporting the Command Duration Limits feature set, the
user can enable/disable this feature use through the sysfs device attribute
"cdl_enable". This attribute modification triggers a call to
scsi_cdl_enable() to enable and disable the feature for ATA devices and set
the scsi device cdl_enable field to the user provided bool value. For SCSI
devices supporting CDL, the feature set is always enabled and
scsi_cdl_enable() is reduced to setting the cdl_enable field.
However, for ATA devices, a drive may spin-up with the CDL feature enabled
by default. But the SCSI device cdl_enable field is always initialized to
false (CDL disabled), regardless of the actual device CDL feature
state. For ATA devices managed by libata (or libsas), libata-core always
disables the CDL feature set when the device is attached, thus syncing the
state of the CDL feature on the device and of the SCSI device cdl_enable
field. However, for ATA devices connected to a SAS HBA, the CDL feature is
not disabled on scan for ATA devices that have this feature enabled by
default, leading to an inconsistent state of the feature on the device with
the SCSI device cdl_enable field.
Avoid this inconsistency by adding a call to scsi_cdl_enable() in
scsi_cdl_check() to make sure that the device-side state of the CDL feature
set always matches the scsi device cdl_enable field state. This implies
that CDL will always be disabled for ATA devices connected to SAS HBAs,
which is consistent with libata/libsas initialization of the device.
Reported-by: Scott McCoy <[email protected]>
Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Igor Pylypiv <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
New CPU #defines encode vendor and family as well as model.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
__write_sb_page() rounds up the io size to the optimal io size if it
doesn't exceed the data offset, but it doesn't check the final size
exceeds the bitmap length.
For example:
page count - 1
page size - 4K
data offset - 1M
optimal io size - 256K
The final io size would be 256K (64 pages) but md_bitmap_storage_alloc()
allocated 1 page, the IO would write 1 valid page and 63 pages that
happens to be allocated afterwards. This leaks memory to the raid device
superblock.
This issue caused a data transfer failure in nvme-tcp. The network
drivers checks the first page of an IO with sendpage_ok(), it returns
true if the page isn't a slabpage and refcount >= 1. If the page
!sendpage_ok() the network driver disables MSG_SPLICE_PAGES.
As of now the network layer assumes all the pages of the IO are
sendpage_ok() when MSG_SPLICE_PAGES is on.
The bitmap pages aren't slab pages, the first page of the IO is
sendpage_ok(), but the additional pages that happens to be allocated
after the bitmap pages might be !sendpage_ok(). That cause
skb_splice_from_iter() to stop the data transfer, in the case below it
hangs 'mdadm --create'.
The bug is reproducible, in order to reproduce we need nvme-over-tcp
controllers with optimal IO size bigger than PAGE_SIZE. Creating a raid
with bitmap over those devices reproduces the bug.
In order to simulate large optimal IO size you can use dm-stripe with a
single device.
Script to reproduce the issue on top of brd devices using dm-stripe is
attached below (will be added to blktest).
I have added some logs to test the theory:
...
md: created bitmap (1 pages) for device md127
__write_sb_page before md_super_write offset: 16, size: 262144. pfn: 0x53ee
=== __write_sb_page before md_super_write. logging pages ===
pfn: 0x53ee, slab: 0 <-- the only page that allocated for the bitmap
pfn: 0x53ef, slab: 1
pfn: 0x53f0, slab: 0
pfn: 0x53f1, slab: 0
pfn: 0x53f2, slab: 0
pfn: 0x53f3, slab: 1
...
nvme_tcp: sendpage_ok - pfn: 0x53ee, len: 262144, offset: 0
skbuff: before sendpage_ok() - pfn: 0x53ee
skbuff: before sendpage_ok() - pfn: 0x53ef
WARNING at net/core/skbuff.c:6848 skb_splice_from_iter+0x142/0x450
skbuff: !sendpage_ok - pfn: 0x53ef. is_slab: 1, page_count: 1
...
Cc: [email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Ofir Gal <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
'init_exec' is unused since
commit cb75d97e9c77 ("drm/nouveau: implement devinit subdev, and new
init table parser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Acked-by: Danilo Krummrich <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Some of AMD ZEN4 APU/CPU have support for adjusting the CPU core
clock more quickly and presicely according to CPU work loading.
This is advertised by the Fast CPPC x86 feature.
This change will only be effective in the *passive mode* of
AMD pstate driver. From the test results of different
transition delay values, 600us is chosen to make a balance
between performance and power consumption.
Some test results on AMD Ryzen 7840HS(Phoenix) APU:
1. Tbench
(Energy less is better, Throughput more is better,
PPW--Performance per Watt more is better)
============= =================== ============== =============== ============== =============== ============== =============== ===============
Trans Delay Tbench governor:schedutil, 3-iterations average
============= =================== ============== =============== ============== =============== ============== =============== ===============
1000us Clients 1 2 4 8 12 16 32
Energy/Joules 2010 2804 8768 17171 16170 15132 15027
Throughput/(MB/s) 114 259 1041 3010 3135 4851 4605
PPW 0.0567 0.0923 0.1187 0.1752 0.1938 0.3205 0.3064
600us Clients 1 2 4 8 12 16 32
Energy/Joules 2115 (5.22%) 2388 (-14.84%) 10700(22.03%) 16716 (-2.65%) 15939 (-1.43%) 15053 (-0.52%) 15083 (0.37% )
Throughput/(MB/s) 122 (7.02%) 234 (-9.65% ) 1188 (14.12%) 3003 (-0.23%) 3143 (0.26% ) 4842 (-0.19%) 4603 (-0.04%)
PPW 0.0576(1.59%) 0.0979(6.07% ) 0.111(-6.49%) 0.1796(2.51% ) 0.1971(1.70% ) 0.3216(0.34% ) 0.3051(-0.42%)
============= =================== ============== ================ ============= =============== ============== =============== ===============
2.Dbench
(Energy less is better, Throughput more is better,
PPW--Performance per Watt more is better)
============= =================== ============== =============== ============== =============== ============== =============== ===============
Trans Delay Dbench governor:schedutil, 3-iterations average
============= =================== ============== =============== ============== =============== ============== =============== ===============
1000us Clients 1 2 4 8 12 16 32
Energy/Joules 4890 3779 3567 5157 5611 6500 8163
Throughput/(MB/s) 327 167 220 577 775 938 1397
PPW 0.0668 0.0441 0.0616 0.1118 0.1381 0.1443 0.1711
600us Clients 1 2 4 8 12 16 32
Energy/Joules 4915 (0.51%) 4912 (29.98%) 3506 (-1.71%) 4907 (-4.85% ) 5011 (-10.69%) 5672 (-12.74%) 8141 (-0.27%)
Throughput/(MB/s) 348 (6.42%) 284 (70.06%) 220 (0.00% ) 518 (-10.23%) 712 (-8.13% ) 854 (-8.96% ) 1475 (5.58% )
PPW 0.0708(5.99%) 0.0578(31.07%) 0.0627(1.79% ) 0.1055(-5.64% ) 0.142(2.82% ) 0.1505(4.30% ) 0.1811(5.84% )
============= =================== ============== =============== ============== =============== ============== =============== ===============
3.Hackbench(less time is better)
============= =========================== ==========================
hackbench governor:schedutil
============= =========================== ==========================
Trans Delay Process Mode Ave time(s) Thread Mode Ave time(s)
1000us 14.484 14.484
600us 14.418(-0.46%) 15.41(+6.39%)
============= =========================== ==========================
4.Perf_sched_bench(less time is better)
============= =================== ============== ============== ============== =============== =============== =============
Trans Delay perf_sched_bench governor:schedutil
============= =================== ============== ============== ============== =============== =============== =============
1000us Groups 1 2 4 8 12 24
AveTime(s) 1.64 2.851 5.878 11.636 16.093 26.395
600us Groups 1 2 4 8 12 24
AveTime(s) 1.69(3.05%) 2.845(-0.21%) 5.843(-0.60%) 11.576(-0.52%) 16.092(-0.01%) 26.32(-0.28%)
============= ================== ============== ============== ============== =============== =============== ==============
5.Sysbench(higher is better)
============= ================== ============== ================= ============== ================ =============== =================
Sysbench governor:schedutil
============= ================== ============== ================= ============== ================ =============== =================
1000us Thread 1 2 4 8 12 24
Ave events 6020.98 12273.39 24119.82 46171.57 47074.37 47831.72
600us Thread 1 2 4 8 12 24
Ave events 6154.82(2.22%) 12271.63(-0.01%) 24392.5(1.13%) 46117.64(-0.12%) 46852.19(-0.47%) 47678.92(-0.32%)
============= ================== ============== ================= ============== ================ =============== =================
In conclusion, a shorter transition delay
of cpu clock will make a quite positive effect to improve PPW
on Dbench test, in the meanwhile, keep stable performance
on Tbench, Hackbench, Perf_sched_bench and Sysbench.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Perry Yuan <[email protected]>
Acked-by: Mario Limonciello <[email protected]>
|
|
GPIO chips should be added with driver-private data associated with the
chip. If none is needed, NULL can be used. All users already do this
except one, fix that here. With no more users of the base gpiochip_add()
we can drop this function so no more users show up later.
Signed-off-by: Andrew Davis <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Drop the hand-coded devres action callback for destroying the mutex in
favor of devm_mutex_init().
Suggested-by: Andy Shevchenko <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
We included kernel.h for ARRAY_SIZE() which has since been moved into
its own header. Use it instead.
Suggested-by: Andy Shevchenko <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Use the dedicated helper for comparing device names against strings.
While at it: reshuffle the code a bit for less indentation.
Suggested-by: Andy Shevchenko <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Invoking the governor .trip_crossed() callback for critical and hot
trips is pointless because they are handled directly by the core,
so make thermal_governor_trip_crossed() avoid doing that.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Some cooling device target state checks in bang_bang_control()
done before setting the new target state are not necessary after
recent changes, so drop them.
Also avoid updating the target state before checking it for
unexpected values.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
When accessing trip temperature and hysteresis without locking, it is
better to use READ_ONCE() to prevent compiler optimizations possibly
affecting the read from being applied.
Of course, for the READ_ONCE() to be effective, WRITE_ONCE() needs to
be used when updating their values.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Modify thermal_zone_set_trips() to use trip thresholds instead of
computing the low temperature for each trip to avoid deriving both
the high and low temperature levels from the same trip (which may
happen if the zone temperature falls into the hysteresis range of
one trip).
Accordingly, make __thermal_zone_device_update() call
thermal_zone_set_trips() later, when threshold values have been
updated for all trips.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Drop the pointless double underline prefix from the function name as per
the subject.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Use the same set of trip type names in sysfs and in the thermal debug
code output.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
The tz_dbg local variable assignments in thermal_debug_tz_trip_up(),
thermal_debug_tz_trip_down(), and thermal_debug_update_trip_stats()
need not be carried out under thermal_dbg->lock, so move them from
under that lock (to avoid possible future confusion).
While at it, reorder local variable definitions in
thermal_debug_tz_trip_up() for more clarity.
No functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Notice that the maximum temperature above the trip point must be the
same for all of the trip points involved in a given mitigation episode,
so it need not be computerd for each of them separately.
It is sufficient to compute the maximum temperature for the mitigation
episode as a whole and print it accordingly, so do that.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Initialize the trip_temp field in struct trip_stats to
THERMAL_TEMP_INVALID and adjust the check for trips without
statistics in tze_seq_show() to look at that field instead of
comparing min and max.
This will mostly be useful to simplify subsequent changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Print temperature units as m°C rather than °mC (the meaning of which is
unclear) and add time unit to the duration column.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Because mitigation episode duration is printed in milliseconds, there
is no reason to print timestamp information for mitigation episodes in
smaller units which also makes it somewhat harder to interpret the
numbers.
Print it in milliseconds for consistency.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Because thermal zone handling by the thermal core is started from
scratch during resume from system-wide suspend, prevent the debug
code from extending mitigation episodes beyond that point by ending
the mitigation episode currently in progress, if any, for each thermal
zone.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Add a helper for updating trip point overstepping duration to be called
from thermal_debug_tz_trip_down().
Subsequently, it will also be used during resume from system-wide
suspend.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Consider a thermal zone with one passive trip point, a cooling device
with 3 states (0, 1, 2) bound to it, passive polling enabled (nonzero
passive_delay_jiffies) and no regular polling (polling_delay_jiffies
equal to 0) that is managed by the Step-Wise governor. Suppose that
the initial state of the cooling device is 0 and the zone temperature
is below the trip point to start with.
When the trip point is crossed, tz->passive is incremented by the
thermal core and the governor's .manage() callback is invoked. It
sets 'throttle' to 'true' for the trip in question and
get_target_state() returns 1 for the instance corresponding to the
cooling device (say that 'upper' and 'lower' are set to 2 and 0 for
it, respectively), so its state changes to 1.
Passive polling is still active for the zone, so next time the
temperature is updated, the governor's .manage() callback will be
invoked again. If the temperature is still rising, it will change
the state of the cooling device to 2.
Now suppose that next time the zone temperature is updated, it falls
below the trip point, so tz->passive is decremented for the zone (say
it becomes 0 then) and the governor's .manage() callbacks runs.
It finds that the temperature trend for the zone is 'falling' and
'throttle' will be set to 'false' for the trip in question, so the
cooling device's state will be changed to 1. However, because
tz->polling is 0 for the zone, the governor's .manage() callback
may not be invoked again for a long time and the cooling device's
state will not be reset back to 0.
This can happen because commit 042a3d80f118 ("thermal: core: Move
passive polling management to the core") removed passive polling
management from the Step-Wise governor.
Before that change, thermal_zone_trip_update() would bump up
tz->passive when changing the target state for a thermal instance
from "no target" to a specific value and it would drop tz->passive
when changing it back to "no target" which would cause passive
polling to be active for the zone until the governor has reset the
states of all cooling devices. In particular, in the example above
tz->passive would be incremented when changing the state of the
cooling device from 0 to 1 and then it would be still nonzero when
the state of the cooling device was changed from 2 to 1.
To prevent this problem from occurring, restore the passive polling
management in the Step-Wise governor by partially reverting the
commit in question and update the comment in the restored code
to explain its role more clearly.
Fixes: 042a3d80f118 ("thermal: core: Move passive polling management to the core")
Closes: https://lore.kernel.org/linux-pm/[email protected]
Reported-by: Johan Hovold <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Whenever per pdev debugfs directory is created, a symlink to it is also
placed in ieee80211/phy* directory. During clean up of per pdev debugfs,
this symlink also needs to be cleaned up.
Add changes to clean up the symlink whenever the per pdev debugfs is
removed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
During normal de-initialization path or if any error happens while
registering the hardware, there is no support to unregister the per pdev
debugfs. Add support for the same.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Function ath12k_debugfs_register() is called once inside the function
ath12k_mac_hw_register(). However, with single wiphy model, there could
be multiple pdevs registered under single hardware. Hence, need to register
debugfs for each one of them.
Move the caller inside the loop which iterates over all underlying pdevs.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: f8bde02a26b9 ("wifi: ath12k: initial debugfs support")
Signed-off-by: Aditya Kumar Singh <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath11k_install_key()
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set. And in ath11k_mac_mgmt_tx_wmi()
a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers.
This results in unexpected management frame drop in case either of above 3 ciphers
is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211
will not generate CCMP/GCMP headers in frame for ath11k. Also MIC length reserved
is wrong. Such frame is dropped later by hardware:
ath11k_pci 0000:5a:00.0: mac tx mgmt frame, buf id 0
ath11k_pci 0000:5a:00.0: mgmt tx compl ev pdev_id 1, desc_id 0, status 1
From user point of view, we have observed very low throughput due to this issue:
action frames are all dropped so ADDBA response from DUT never reaches AP. AP
can not use aggregation thus throughput is low.
Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag and by reserving proper
MIC length for those ciphers.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Yaroslav Isakov <[email protected]>
Tested-by: Yaroslav Isakov <[email protected]>
Closes: https://lore.kernel.org/all/CADS+iDX5=JtJr0apAtAQ02WWBxgOFEv8G063vuGYwDTC8AVZaw@mail.gmail.com
Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Currently, in the Rx error processing handler, once an MSDU drop is
detected, the subsequent MSDUs get unintentionally dropped due to the
previous drop flag being retained across all MSDU processing, leading
to the discarding of valid MSDUs. To resolve this issue, the drop flag
should be reset to false before processing each descriptor.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_timeout() causing patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Current documentation on RCU in ath11k_mac_op_ipv6_changed() says:
/* Note: read_lock_bh() calls rcu_read_lock() */
read_lock_bh(&idev->lock);
This is wrong because without enabling CONFIG_PREEMPT_RT
rcu_read_lock() is not called by read_lock_bh(). The reason
why current code works even in a CONFIG_PREEMPT_RT=n kernel
is because atomic_notifier_call_chain() already does that for
us, see:
int atomic_notifier_call_chain()
{
...
rcu_read_lock();
ret = notifier_call_chain(&nh->head, val, v, -1, NULL);
rcu_read_unlock();
...
}
and backtrace:
ath11k_mac_op_ipv6_changed
ieee80211_ifa6_changed
notifier_call_chain
atomic_notifier_call_chain
So update the comment to make it correct.
This is found during code review, compile tested only.
Fixes: feafe59c8975 ("wifi: ath11k: use RCU when accessing struct inet6_dev::ac_list")
Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Currently ACPI notification handler is installed when driver loads and only
gets removed when driver unloads. During resume after firmware is reloaded,
ath12k tries to install it by default. Since it is installed already, ACPI
subsystem rejects it and returns an error:
[ 83.094206] ath12k_pci 0000:03:00.0: failed to install DSM notify callback: 7
Fix it by removing that handler when going to suspend. This also avoid any
possible ACPI call to firmware before firmware is reloaded/reinitialized.
Note ab->acpi also needs to be cleared in ath12k_acpi_stop() such that we
are in a clean state when ACPI structures are reinitialized in
ath12k_acpi_start().
Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 576771c9fa21 ("wifi: ath12k: ACPI TAS support")
Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
When multiple radios are advertised as a single wiphy which supports various
bands, vdev creation for the vif is deferred until channel is assigned to it.
If a remain on channel (RoC) request is received from mac80211, select the
corresponding radio (ar) based on channel and create a vdev on that radio to
initiate an RoC scan.
Note that on RoC completion this vdev is not deleted. If a new RoC/hw scan
request is seen on that same vif for a different band the vdev will be deleted
and created on the new radio supporting the request.
Also if the RoC scan is requested when the vdev is in started state, no
switching to new radio is allowed and RoC request can be accepted only on
channels within same radio.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Rameshkumar Sundaram <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Use the recently added DLM_LSFL_SOFTIRQ flag in dlm_new_lockspace(),
signalling the ability to handle callbacks being run from softirq
context. The md-cluster callback functions only call complete(),
which is suitable for softirq. This should make dlm lock request
completions more efficient by avoiding the workqueue context switch.
Acked-by: Heming Zhao <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
|
|
The calls write_lock/unlock_irq() disables and re-enables the IRQs.
Calling spin_lock_irqsave() and spin_lock_restore() when the IRQs are
already disabled doesn't do anything and just makes the code confusing.
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
i.MX 8QM
Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
that both source and destination addresses need pass through the IOMMU.
Typically, peripheral FIFO addresses bypass the IOMMU, necessitating
only one of the source or destination to go through it.
Set "is_remote" to true to ensure both source and destination
addresses pass through the IOMMU.
iMX8 Spec define "Local" and "Remote" bus as below.
Local bus: bypass IOMMU to directly access other peripheral register,
such as FIFO.
Remote bus: go through IOMMU to access system memory.
The test fail log as follow:
[ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0)
[ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0)
Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <[email protected]>
Cc: [email protected]
Reviewed-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
'reg_info' was never used since it's initial
commit 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Remove unused struct 'moxart_filter_data'
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The 'idle' in fsl_chan is redundant as it's equivalent to
'status != DMA_IN_PROGRESS'. So remote it to simple code logic.
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The edma feature individual IRQs for each DMA channel at some devices.
Given the presence of numerous eDMA instances, each with multiple channels,
IRQ request during probe results in an extensive list at /proc/interrupts.
However, a significant portion of these channels remains unused by the
system.
Request irq only when a DMA client driver requests a DMA channel.
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
On STM32 DMA3, channels can be reserved, so they are non available for
Linux. This non-availability creates a mismatch between dma_chan id and
DMA3 channel id.
Use dma_async_device_channel_register() to register the channels
after controller registration and change the default channel name, so that
it can match the name in the Reference Manual and ease requesting a channel
thanks to its name.
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Channel device name is used for sysfs, but also by dmatest filter function.
With dynamic channel registration, channels can be registered after dma
controller registration. Users may want to have specific channel names.
If name is NULL, the channel name relies on previous implementation,
dma<controller_device_id>chan<channel_device_id>.
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Implement own device_tx_status ops to compute the residue with a finer
granularity, up to bytes.
STM32 DMA3 has a bitfield, BNDT, in CxTR1 register which reflects the
number of bytes read from the source.
It also has a bitfield, FIFOL, in CxSR register which reflects the FIFO
level in units of programmed destination data width.
The channel is briefly suspended to get a coherent snapshot of registers.
It is possible to correct the fifo level when packing/unpacking is enabled
with destination increment.
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|