aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-06-14accel/ivpu: Remove duplicated debug messagesJacek Lawrynowicz1-14/+6
Remove duplicated debug messages from ivpu_jsm_(un)register_db(). Debug messages are already printed one level higher. Signed-off-by: Jacek Lawrynowicz <[email protected]> Reviewed-by: Wachowski, Karol <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Increase autosuspend delay to 100ms on 40xxAndrzej Kacprowski1-1/+4
The new HW is more power efficient and there is no need to enter the D0i3/D3 so quickly. Increasing autosuspend delay reduces latency in certain usage scenarios. Signed-off-by: Andrzej Kacprowski <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14gpiolib: put gpio_suffixes in a single compilation unitBartosz Golaszewski4-5/+10
The gpio_suffixes array is defined in the gpiolib.h header. This means the array is stored in .rodata of every compilation unit that includes it. Put the definition for the array in gpiolib.c and export just the symbol in the header. We need the size of the array so expose it too. Reviewed-by: Mika Westerberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-06-14accel/ivpu: Synchronize device unbind with recovery workWachowski, Karol1-2/+2
Do not allow unbinding device in the middle of recovery flow. Signed-off-by: Wachowski, Karol <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Disable MMU before checking for idleJacek Lawrynowicz1-0/+2
Disable MMU communication before checking if NPU is idle. NPU may otherwise be woken up when adding/removing contexts. Signed-off-by: Jacek Lawrynowicz <[email protected]> Reviewed-by: Wachowski, Karol <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Add test mode flag for disabling timeoutsMaciej Falkowski2-5/+8
Add new test mode flag that will disable all timeouts defined in timeout fields of struct ivpu_device. Remove also reschedule_suspend field as it is unused. Signed-off-by: Maciej Falkowski <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Make parts of FW image read-onlyWachowski, Karol4-1/+120
Implement setting specified buffer ranges as read-only. In case if specified range is not 64K aligned and 64K contiguous MMU600 pages are turned on, split 64K mapping to allow 4K granularity for read-only configuration. Signed-off-by: Wachowski, Karol <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Update FW BOOT API headersWachowski, Karol1-2/+14
This commit bumps BOOT API version to 3.24 Signed-off-by: Wachowski, Karol <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Make selected params read-onlyJacek Lawrynowicz1-2/+2
Make disable_mmu_cont_pages and force_snoop params read-only. It is unsafe to change these params after driver is loaded. Signed-off-by: Jacek Lawrynowicz <[email protected]> Reviewed-by: Wachowski, Karol <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Implement DCT handlingJacek Lawrynowicz10-20/+186
When host system is under heavy load and the NPU is already running on the lowest frequency, PUNIT may request Duty Cycle Throttling (DCT). This will further reduce NPU power usage. PUNIT requests DCT mode using Survabilty IRQ and mailbox register. The driver then issues a JSM message to the FW that enables the DCT mode. If the NPU resets while in DCT mode, the driver request DCT mode during FW boot. Also add debugfs "dct" file that allows to set arbitrary DCT percentage, which is used by driver tests. Signed-off-by: Jacek Lawrynowicz <[email protected]> Reviewed-by: Wachowski, Karol <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Disable clock relinquish for MMIO resetWachowski, Karol1-0/+2
It is required to disable NPU clock relinquish for the time of MMIO reset. Clock relinquish gets into default (enabled) state after MMIO reset is performed. Signed-off-by: Wachowski, Karol <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Disable disable_clock_relinquish WA for LNL B0+Wachowski, Karol2-1/+4
This WA is only needed for LNL revision A. Signed-off-by: Wachowski, Karol <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Remove suspend_reschedule_counterJacek Lawrynowicz2-22/+12
Don't retry runtime suspend. It is now expected to succeed on the first try. After autosuspend_delay passed, FW should already be idle and ready for warm suspend. Signed-off-by: Jacek Lawrynowicz <[email protected]> Reviewed-by: Wachowski, Karol <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Abort jobs of faulty contextMaciej Falkowski9-11/+75
Abort all jobs that belong to contexts generating MMU faults in order to avoid flooding host with MMU IRQs. Jobs are cancelled with: - SSID_RELEASE command when OS scheduling is enabled - DESTROY_CMDQ command when HW scheduling is enabled Signed-off-by: Maciej Falkowski <[email protected]> Co-developed-by: Wachowski, Karol <[email protected]> Signed-off-by: Wachowski, Karol <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14accel/ivpu: Add wp0_during_power_up WAWachowski, Karol2-0/+12
Send workpoint 0 request during power up on 37xx. This is needed in rare case where WP0 was not sent during power down due to device hang. Signed-off-by: Wachowski, Karol <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-14arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilationspengfuyuan1-8/+0
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n, the compiler will optimize the rest away since they are no longer referenced. The benefit of removing the conditional compilation is that the build is actually tested for both CONFIG_DEBUG_FS configuration values. Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested much and may fail the build due to the conditional compilation. Reported-by: k2ci <[email protected]> Signed-off-by: pengfuyuan <[email protected]> Acked-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Liviu Dudau <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2024-06-14clk: sophgo: Add SG2042 clock driverChen Wang6-0/+2063
Add a driver for the SOPHGO SG2042 clocks. Signed-off-by: Chen Wang <[email protected]>
2024-06-14USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messagesAlan Stern1-2/+2
The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32e94de ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-06-14media: imx283: drop CENTERED_RECTANGLE due to clang failureHans Verkuil1-11/+18
The CENTERED_RECTANGLE define fails to compile on clang and old gcc versions. Just drop it and fill in the crop rectangles explicitly. Signed-off-by: Hans Verkuil <[email protected]> Reviewed-by: Kieran Bingham <[email protected]> Acked-by: Sakari Ailus <[email protected]>
2024-06-14platform/chrome: cros_ec_lpc: Handle zero length read/writeBen Walsh1-3/+3
cros_ec_lpc_mec_read_bytes and cros_ec_lpc_mec_write_bytes call cros_ec_lpc_mec_in_range, which checks if addresses are in the MEC address range, and returns -EINVAL if the range given is not sensible. However cros_ec_lpc_mec_in_range was also returning -EINVAL for a zero length range. A zero length range should not be an error condition. cros_ec_lpc_mec_in_range now returns 1 in this case. cros_ec_lpc_io_bytes_mec checks for zero length, and returns immediately without beginning a transfer. Fixes: 68dbac0a58ef ("platform/chrome: cros_ec_lpc: MEC access can return error code") Fixes: 77a714325d09 ("platform/chrome: cros_ec_lpc: Fix error code in cros_ec_lpc_mec_read_bytes()") Signed-off-by: Ben Walsh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Tzung-Bi Shih <[email protected]>
2024-06-14fpga: altera-fpga2sdram: remove unused struct 'prop_map'Dr. David Alan Gilbert1-6/+0
'prop_map' has been unused since the original commit e5f8efa5c8bf ("ARM: socfpga: fpga bridge driver support"). Remove it. Signed-off-by: Dr. David Alan Gilbert <[email protected]> Reviewed-by: Russ Weight <[email protected]> Acked-by: Xu Yilun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Xu Yilun <[email protected]>
2024-06-14Merge tag 'drm-xe-fixes-2024-06-13' of ↵Dave Airlie4-11/+37
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Core Changes: - Xe Maintainers update to MAINTAINERS file. Driver Changes: - Use correct forcewake assertions. - Assert that VRAM provisioning is only done on DGFX. - Flush render caches before user-fence signalling on all engines. - Move the disable_c6 call since it was sometimes never called. Signed-off-by: Dave Airlie <[email protected]> From: Thomas Hellstrom <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora
2024-06-13scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for ↵Bart Van Assche2-0/+13
USB/UAS devices Recently it was reported that the following USB storage devices are unusable with Linux kernel 6.9: * Kingston DataTraveler G2 * Garmin FR35 This is because attempting to read the IO Advice Hints Grouping mode page causes these devices to reset. Hence do not read the IO Advice Hints Grouping mode page from USB/UAS storage devices. Acked-by: Alan Stern <[email protected]> Cc: [email protected] Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Reported-by: Joao Machado <[email protected]> Closes: https://lore.kernel.org/linux-scsi/[email protected]/T/#mf4e3410d8f210454d7e4c3d1fb5c0f41e651b85f Tested-by: Andy Shevchenko <[email protected]> Bisected-by: Christian Heusel <[email protected]> Reported-by: Andy Shevchenko <[email protected]> Closes: https://lore.kernel.org/linux-scsi/CACLx9VdpUanftfPo2jVAqXdcWe8Y43MsDeZmMPooTzVaVJAh2w@mail.gmail.com/ Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-06-13scsi: core: Introduce the BLIST_SKIP_IO_HINTS flagBart Van Assche1-0/+4
Prepare for skipping the IO Advice Hints Grouping mode page for USB storage devices. Cc: Alan Stern <[email protected]> Cc: Joao Machado <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Christian Heusel <[email protected]> Cc: [email protected] Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-06-13scsi: ufs: core: Free memory allocated for model before reinitJoel Slebodnick1-0/+1
Under the conditions that a device is to be reinitialized within ufshcd_probe_hba(), the device must first be fully reset. Resetting the device should include freeing U8 model (member of dev_info) but does not, and this causes a memory leak. ufs_put_device_desc() is responsible for freeing model. unreferenced object 0xffff3f63008bee60 (size 32): comm "kworker/u33:1", pid 60, jiffies 4294892642 hex dump (first 32 bytes): 54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc ed7ff1a9): [<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40 [<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc [<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190 [<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8 [<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404 [<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370 [<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0 [<ffffb86704f34638>] process_one_work+0x154/0x298 [<ffffb86704f34a74>] worker_thread+0x2f8/0x408 [<ffffb86704f3cfa4>] kthread+0x114/0x118 [<ffffb86704e955a0>] ret_from_fork+0x10/0x20 Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device") Cc: <[email protected]> Reviewed-by: Andrew Halaney <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Joel Slebodnick <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-06-14Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of ↵Dave Airlie3-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Regression fix - Fix an regression issue by adding 640x480 fallback mode for Exynos HDMI driver. Bug fix - Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function. Code cleanup - Remove redundant driver owner initialization since platform_driver_register() sets it automatically. Signed-off-by: Dave Airlie <[email protected]> From: Inki Dae <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-06-13net: dsa: lantiq_gswip: Improve error message in gswip_port_fdb()Martin Blumenstingl1-1/+2
Print that no FID is found for bridge %s instead of the incorrect message that the port is not part of a bridge. Signed-off-by: Martin Blumenstingl <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: Update comments in gswip_port_vlan_filtering()Martin Blumenstingl1-2/+2
Update the comments in gswip_port_vlan_filtering() so it's clear that there are two separate cases, one for "tag based VLAN" and another one for "port based VLAN". Suggested-by: Martin Schiller <[email protected]> Signed-off-by: Martin Blumenstingl <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: Remove dead code from gswip_add_single_port_br()Martin Schiller1-6/+0
The port validation in gswip_add_single_port_br() is superfluous and can be omitted. Suggested-by: Vladimir Oltean <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: Consistently use macros for the mac bridge tableMartin Blumenstingl1-7/+11
Only bits [5:0] in mac_bridge.key[3] are reserved for the FID. Also, for dynamic (learned) entries, bits [7:4] in mac_bridge.val[0] represents the port. Introduce new macros GSWIP_TABLE_MAC_BRIDGE_KEY3_FID and GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT macro and use it throughout the driver. Also rename and update GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC to use the BIT() macro. This makes the driver code easier to understand. Signed-off-by: Martin Blumenstingl <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: Change literal 6 to ETH_ALENMartin Blumenstingl1-1/+1
The addr variable in gswip_port_fdb_dump() stores a mac address. Use ETH_ALEN to make this consistent across other drivers. Signed-off-by: Martin Blumenstingl <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: Use dsa_is_cpu_port() in gswip_port_change_mtu()Martin Blumenstingl1-2/+1
Make the check for the CPU port in gswip_port_change_mtu() consistent with other areas of the driver by using dsa_is_cpu_port(). Signed-off-by: Martin Blumenstingl <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: do also enable or disable cpu portMartin Schiller1-16/+8
Before commit 74be4babe72f ("net: dsa: do not enable or disable non user ports"), gswip_port_enable/disable() were also executed for the cpu port in gswip_setup() which disabled the cpu port during initialization. Let's restore this by removing the dsa_is_user_port checks. Also, let's clean up the gswip_port_enable() function so that we only have to check for the cpu port once. The operation reordering done here is safe. Signed-off-by: Martin Schiller <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: Don't manually call gswip_port_enable()Martin Blumenstingl1-2/+0
We don't need to manually call gswip_port_enable() from within gswip_setup() for the CPU port. DSA does this automatically for us. Signed-off-by: Martin Blumenstingl <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: Use dev_err_probe where appropriateMartin Blumenstingl1-28/+25
dev_err_probe() can be used to simplify the existing code. Also it means we get rid of the following warning which is seen whenever the PMAC (Ethernet controller which connects to GSWIP's CPU port) has not been probed yet: gswip 1e108000.switch: dsa switch register failed: -517 Signed-off-by: Martin Blumenstingl <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: add terminating \n where missingMartin Schiller1-7/+7
Some dev_err are missing the terminating \n. Let's add that. Suggested-by: Vladimir Oltean <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: dsa: lantiq_gswip: Only allow phy-mode = "internal" on the CPU portMartin Blumenstingl1-0/+2
Add the CPU port to gswip_xrx200_phylink_get_caps() and gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus, so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL. Signed-off-by: Martin Blumenstingl <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Signed-off-by: Martin Schiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13net: mvpp2: use slab_build_skb for oversized framesAryan Srivastava1-1/+4
Setting frag_size to 0 to indicate kmalloc has been deprecated, use slab_build_skb directly. Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()") Signed-off-by: Aryan Srivastava <[email protected]> Reviewed-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13Merge branch 'mana-shared' of ↵Jakub Kicinski3-26/+96
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Leon Romanovsky says: ==================== net: mana: Allow variable size indirection table Like we talked, I created new shared branch for this patch: https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/log/?h=mana-shared * 'mana-shared' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: net: mana: Allow variable size indirection table ==================== Link: https://lore.kernel.org/all/20240612183051.GE4966@unreal Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-13hwmon: (core) Make hwmon_class constThomas Weißschuh1-1/+1
Now that the driver core allows for struct class to be in read-only memory, mark hwmon_class as const. Signed-off-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-06-13clk: qcom: Add QCM2290 GPU clock controller driverKonrad Dybcio3-0/+433
Add a driver for the GPU clock controller block found on the QCM2290 SoC. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-13fbdev: vfb: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/vfb.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2024-06-13fbdev: macmodes: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/macmodes.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2024-06-13fbdev: goldfishfb: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/goldfishfb.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2024-06-13fbdev: kyro: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/kyro/kyrofb.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2024-06-13fbdev: viafb: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/via/viafb.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2024-06-13fbdev: matroxfb: add missing MODULE_DESCRIPTION() macrosJeff Johnson3-0/+3
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_accel.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_DAC1064.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/matrox/matroxfb_Ti3026.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2024-06-13video/logo: Make logo data const againGeert Uytterhoeven1-2/+2
As gcc-4.1 is no longer supported, the logo data can be made const again. Hence revert commit 15e3252464432a29 ("fbdev: work around old compiler bug"). Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2024-06-13Merge tag 'nvme-6.10-2024-06-13' of git://git.infradead.org/nvme into block-6.10Jens Axboe5-16/+10
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.10 - Discard double free on error conditions (Chunguang) - Target Fixes (Daniel) - Namespace detachment regression fix (Keith)" * tag 'nvme-6.10-2024-06-13' of git://git.infradead.org/nvme: nvme: fix namespace removal list nvmet: always initialize cqe.result nvmet-passthru: propagate status from id override functions nvme: avoid double free special payload
2024-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski85-602/+841
Cross-merge networking fixes after downstream PR. No conflicts, no adjacent changes. Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.