aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-09-24ata: libata-scsi: Fix ata_msense_control_spgt2()Damien Le Moal1-1/+6
ata_msense_control_spgt2() can be called even for devices that do not support CDL when the user requests the ALL_SUB_MPAGES mode sense page, but for such device, this will cause a NULL pointer dereference as dev->cdl is NULL. Similarly, we should not return any data if ata_msense_control_spgt2() is called when the user requested the CDL_T2A_SUB_MPAGE or CDL_T2B_SUB_MPAGE pages for a device that does not support CDL. Avoid this potential NULL pointer dereference by checking if the device support CDL on entry to ata_msense_control_spgt2() and return 0 if it does not support CDL. Reported-by: [email protected] Tested-by: [email protected] Fixes: 602bcf212637 ("ata: libata: Improve CDL resource management") Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]>
2024-09-24LoongArch: Enable ACPI BGRT handlingBibo Mao1-1/+1
Add ACPI BGRT support on LoongArch so it can display image provied by acpi table at boot stage and switch to graphical UI smoothly. Signed-off-by: Bibo Mao <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2024-09-24drm/sched: Fix dynamic job-flow control raceRob Clark2-7/+4
Fixes a race condition reported here: https://github.com/AsahiLinux/linux/issues/309#issuecomment-2238968609 The whole premise of lockless access to a single-producer-single- consumer queue is that there is just a single producer and single consumer. That means we can't call drm_sched_can_queue() (which is about queueing more work to the hw, not to the spsc queue) from anywhere other than the consumer (wq). This call in the producer is just an optimization to avoid scheduling the consuming worker if it cannot yet queue more work to the hw. It is safe to drop this optimization to avoid the race condition. Suggested-by: Asahi Lina <[email protected]> Fixes: a78422e9dff3 ("drm/sched: implement dynamic job-flow control") Closes: https://github.com/AsahiLinux/linux/issues/309 Cc: [email protected] Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Tested-by: Janne Grunau <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-09-23Merge tag 'media/v6.12-1' of ↵Linus Torvalds259-1217/+5850
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New CEC driver: Extron DA HD 4K Plus - Lots of driver fixes, cleanups and improvements * tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits) media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode() media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable media: atomisp: set lock before calling vb2_queue_init() media: atomisp: Improve binary finding debug logging media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]() media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2 media: atomisp: add missing wait_prepare/finish ops media: atomisp: Remove unused declaration media: atomisp: use clamp() in compute_coring() media: atomisp: use clamp() in ia_css_eed1_8_encode() media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output() media: atomisp: Replace rarely used macro from math_support.h media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h media: atomisp: bnr: fix trailing statement media: atomisp: move trailing */ to separate lines media: atomisp: move trailing statement to next line. media: atomisp: Fix trailing statement in ia_css_de.host.c media: atomisp: Fix spelling mistakes in atomisp.h media: atomisp: Fix spelling mistakes in atomisp_platform.h media: atomisp: Fix spelling mistake in csi_rx_public.h ...
2024-09-23Merge tag 'clk-for-linus' of ↵Linus Torvalds351-2983/+14671
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core clk framework is left largely untouched this time around except for support for the newly ratified DT property 'assigned-clock-rates-u64'. I'm much more excited about the support for loading DT overlays from KUnit tests so that we can test how the clk framework parses DT nodes during clk registration. The clk framework has some places that are highly DeviceTree dependent so this charts the path to extend the KUnit tests to cover even more framework code in the future. I've got some more tests on the list that use the DT overlay support, but they uncovered issues with clk unregistration that I'm still working on fixing. Outside the core, the clk driver update pile is dominated by Qualcomm and Renesas SoCs, making it fairly usual. Looking closer, there are fixes for things all over the place, like adding missing clk frequencies or moving defines for the number of clks out of DT binding headers into the drivers. There are even conversions of DT bindings to YAML and migration away from strings to describe clk topology. Overall it doesn't look unusual so I expect the new drivers to be where we'll have fixes in the coming weeks. Core: - KUnit tests for clk registration and fixed rate basic clk type - A couple more devm helpers, one consumer and one provider - Support for assigned-clock-rates-u64 New Drivers: - Camera, display and GPU clocks on Qualcomm SM4450 - Camera clocks on Qualcomm SM8150 - Rockchip rk3576 clks - Microchip SAM9X7 clks - Renesas RZ/V2H(P) (R9A09G057) clks Updates: - Mark a bunch of struct freq_tbl const to reduce .data usage - Add Qualcomm MSM8226 A7PLL and Regera PLL support - Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse Trion, as they do differ - A number of fixes to the Qualcomm SM8550 display clock driver - Fold Qualcomm SM8650 display clock driver into SM8550 one - Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998 - Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X - Fix sdcc clk frequency tables on Qualcomm SC8180X - Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src - Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid them turning off during suspend - Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller GDSCs - Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers - Some fixes for Rockchip rk3228 and rk3588 - Exynos850: Add clock for Thermal Management Unit - Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs and add clocks for USB block in the FSYS clock controller - ExynosAutov9: Add DPUM clock controller - ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0 (and a bit more complete bindings) - Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel clocks on i.MX8Q as parents in ACM provider - Add i.MX95 NETCMIX support to the block control provider - Fix parents for ENETx_REF_SEL clocks on i.MX6UL - Add USB clocks, resets and power domains on Renesas RZ/G3S - Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on Renesas RZ/V2H - Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M - Add LCD controller clocks and resets on Renesas RZ/G2UL - Add DMA clocks and resets on Renesas RZ/G3S - Add fractional multiplication PLL support on Renesas R-Car Gen4 - Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC - Support for the Microchip SAM9X7 SoC as follows: - Updates for the Microchip PLL drivers - DT binding documentation updates (for the new clock driver and for the slow clock controller that SAM9X7 is using) - A fix for the Microchip SAMA7G5 clock driver to avoid allocating more memory than necessary - Constify some Amlogic structs - Add SM1 eARC clocks for Amlogic - Introduce a symbol namespace for Amlogic clock specific symbols - Add reset controller support to audiomix block control on i.MX - Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D lcdif_pixel_src clock - Fix parent clocks for earc_phy and audpll on i.MX8MP - Fix default parents for enet[12]_ref_sel on i.MX6UL - Add ops in composite 8M and 93 that allow no-op on disable - Add check for PCC present bit on composite 7ULP register - Fix fractional part for fracn-gppll on prepare in i.MX - Fix clock tree update for TF-A managed clocks on i.MX8M - Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D - Add the SAI7 IPG clock for i.MX8MN - Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM - Add LVDS bypass clocks on i.MX8QXP - Add muxes for MIPI and PHY ref clocks on i.MX - Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP - Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX - Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP - Add some module descriptions to the i.MX generic and the i.MXRT1050 driver - Fix return value for bypass for composite i.MX7ULP - Move Mediatek clk bindings to clock/ - Convert some more clk bindings to dt schema" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits) clk: Switch back to struct platform_driver::remove() dt-bindings: clock, reset: fix top-comment indentation rk3576 headers clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions clk: provide devm_clk_get_optional_enabled_with_rate() clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data() clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT clk: renesas: rzv2h: Add support for dynamic switching divider clocks clk: renesas: r9a08g045: Add clocks, resets and power domains for USB clk: rockchip: fix error for unknown clocks clk: rockchip: rk3588: drop unused code clk: rockchip: Add clock controller for the RK3576 clk: rockchip: Add new pll type pll_rk3588_ddr dt-bindings: clock, reset: Add support for rk3576 dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p clk: imx95: enable the clock of NETCMIX block control dt-bindings: clock: add RMII clock selection dt-bindings: clock: add i.MX95 NETCMIX block control clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data ...
2024-09-23Merge tag 'i2c-for-6.12-rc1' of ↵Linus Torvalds42-547/+1462
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C core: - finally remove the I2C_COMPAT symbol after 15 years of deprecation - lock client addresses during initialization to prevent race conditions between different kinds of instantiation - use scoped foreach OF child loops - testunit cleanups and documentation improvements, as well as two new tests, one for repeated start and one for triggering SMBusAlert interrupts I2C host drivers: - DesignWare and Renesas I2C driver updates. The first has has undergone through a series of cleanups that have been sent to the mailing list a year ago for the first time and finally get merged in this pull request. They are many, from typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline functions to librarieas) and many others. - all the DesignWare Kconfig options have been grouped under the I2C_DESIGNWARE_CORE and this required some adaptation in many of the kernel configuration files for different arm and mips boards Cleanups: - improve the exit path in the runtime resume function for the Qualcomm Geni platform - get rid of the unused "target_addr" parameter in the Intel LJCA driver - intialize the restart_flag in the MediaTek controller in one single place - constify a few global data structures in the virtio driver - simplify the bus speed handling in the Renesas driver init function making it more readable - improved probe function of the Renesas R-Car driver - switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of SET_RUNTIME_PM_OPS() - iMX/MXC driver cleanups - use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic and MPC drivers Refactoring: - Fix a potential out of boundary array access in the Nuvoton driver. This is not a bug fix because the issue could never occur due to hardware not having the properties listed in the array. The change makes the driver more future proof and, at the same time, silences code analyzers. Improvements: - several patches improving the runtime power management handling of the Renesas I2C (riic) driver - use a more descriptive adapter name in the Intel i801 driver to show the presence of the IDF feature - kill pending transactions when irq's can't complete their handling in the Intel Denverton (ismt) driver, triggering a timeout New Feature: - support fast mode plus in the Renesas I2C (riic) driver New support: - Added support for: - Renesas R9A08G045 - Rockchip RK3576 - KEBA I2C - Theobroma Systems Mule Multiplexer. - new i2c-keba.c driver - new driver for The Mule i2c multiplexer Core I2C framework: - move runtime PM functions in order to allow them to be accessed during device add Devicetree: - nVidia and Qualcomm binding improvements - get rid of redundant "multi-master" property in the aspeed binding - convert i2c-sprd binding to YAML AT24 updates: - document a new model from giantec in DT bindings" * tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits) i2c: designware: Use pci_get_drvdata() i2c: designware: Propagate firmware node i2c: designware: Uninline i2c_dw_probe() i2c: ljca: Remove unused "target_addr" parameter i2c: keba: Add KEBA I2C controller support i2c: i801: Use a different adapter-name for IDF adapters i2c: core: Setup i2c_adapter runtime-pm before calling device_add() dt-bindings: i2c: i2c-sprd: convert to YAML i2c: ismt: kill transaction in hardware on timeout i2c: designware: Group all DesignWare drivers under a single option net: txgbe: Fix I2C Kconfig dependencies RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe() i2c: imx: Convert comma to semicolon i2c: jz4780: Use devm_clk_get_enabled() helpers ...
2024-09-23Merge tag 'libnvdimm-for-6.12' of ↵Linus Torvalds3-28/+19
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ira Weiny: - use Open Firmware helper routines - fix memory leak when nvdimm labels are incorrect - remove some dead code * tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: Remove dead code for ENODEV checking in scan_labels() nvdimm: Fix devs leaks in scan_labels() nvdimm: Use of_property_present() and of_property_read_bool()
2024-09-23Merge tag 'backlight-next-6.12' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight update from Lee Jones: - Added a check for the return value of spi_setup() in the l4f00242t03 driver to catch errors * tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: l4f00242t03: Add check for spi_setup
2024-09-23Merge tag 'leds-next-6.12' of ↵Linus Torvalds28-293/+520
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: - Limited LED current based on thermal conditions in the QCOM flash LED driver - Fixed device child node usage in the BD2606MVV and PCA995x drivers - Used device_for_each_child_node_scoped() to access child nodes in the IS31FL319X driver - Reset the LED controller during the probe in the LM3601X driver - Used device_for_each_child_node() to access device child nodes in the PCA995X driver - Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver - Replaced msleep() with usleep_range() in the SUN50I-A100 driver - Used scoped device node handling to simplify error paths in the AAT1290, KTD2692, and MC13783 drivers - Added missing of_node_get for probe duration in the MAX77693 driver - Simplified using for_each_available_child_of_node_scoped() loops when iterating over device nodes - Used devm_clk_get_enabled() helpers in the LP55XX driver - Converted DT bindings from TXT to YAML format for various drivers, including LM3692x and SC2731-BLTC - Set num_leds after allocation in the GPIO driver - Removed irrelevant blink configuration error message in the PCA9532 driver - Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris Omnia driver * tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits) leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE() leds: pca9532: Remove irrelevant blink configuration error message leds: gpio: Set num_leds after allocation dt-bindings: leds: Convert leds-lm3692x to YAML format leds: lp55xx: Use devm_clk_get_enabled() helpers leds: as3645a: Use device_* to iterate over device child nodes leds: qcom-lpg: Simplify with scoped for each OF child loop leds: turris-omnia: Simplify with scoped for each OF child loop leds: sc27xx: Simplify with scoped for each OF child loop leds: pca9532: Simplify with scoped for each OF child loop leds: netxbig: Simplify with scoped for each OF child loop leds: mt6323: Simplify with scoped for each OF child loop leds: mc13783: Use scoped device node handling to simplify error paths leds: lp55xx: Simplify with scoped for each OF child loop leds: is31fl32xx: Simplify with scoped for each OF child loop leds: bcm6358: Simplify with scoped for each OF child loop leds: bcm6328: Simplify with scoped for each OF child loop leds: aw2013: Simplify with scoped for each OF child loop leds: 88pm860x: Simplify with scoped for each OF child loop leds: max77693: Simplify with scoped for each OF child loop ...
2024-09-23Merge tag 'mfd-next-6.12' of ↵Linus Torvalds38-108/+150
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: - Added support for the Analog Devices ADP5585 GPIO and PWM functions - Added parsing of GPIO hogs for the ADP5585 - Fixed module autoloading in the MAX14577 driver - Simplified and cleaned up the CROS_EC driver - Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the INTEL_SOC_PMIC_CHTWC driver - Added support for the RK806 PMIC on the I2C bus - Removed the remaining header file for the DS1WM driver - Added compatible strings for various devices in the device tree bindings - Fixed a comma-related issue in the 88PM860X_CORE driver - Constified read-only regmap structs in various drivers - Used scoped variables with memory allocators to simplify error paths in the MT6360 and SYSCON drivers - Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs * tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits) mfd: atc260x: Convert a bunch of commas to semicolons dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs dt-bindings: mfd: syscon: Add rk3576 QoS register compatible dt-bindings: mfd: adp5585: Add parsing of hogs mfd: tc3589x: Drop vendorless compatible string from match table mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped() mfd: max77620: Use for_each_child_of_node_scoped() mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict mfd: cros_ec: Update module description mfd: cros_ec: Simplify and clean-up cros_ec_dev_init() mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloading mfd: rk8xx: Add support for rk806 on i2c bus dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible mfd: ds1wm: Remove remaining header file MAINTAINERS: Repair file entry in MARVELL 88PM886 PMIC DRIVER mfd: 88pm860x-core: Convert comma to semicolon mfd: syscon: Use scoped variables with memory allocators to simplify error paths mfd: mt6360: Use scoped variables with memory allocators to simplify error paths ...
2024-09-23Merge tag 'dmaengine-6.12-rc1' of ↵Linus Torvalds52-65/+2575
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Unusually, more new driver and device support than updates. Couple of new device support, AMD, Rcar, Intel and New drivers in Freescale, Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc. New support: - Support for AMD Versal Gen 2 DMA IP - Rcar RZ/G3S SoC dma controller - Support for Intel Diamond Rapids and Granite Rapids-D dma controllers - Support for Freescale ls1021a-qdma controller - New driver for Loongson-1 APB DMA - New driver for AMD QDMA - Pl08x in LPC32XX router dma driver Updates: - Support for dpdma cyclic dma mode - XML conversion for marvell xor dma bindings - Dma clocks documentation for imx dma" * tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits) dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname dmaengine: Fix spelling mistakes dmaengine: Add dma router for pl08x in LPC32XX SoC dmaengine: fsl-edma: add edma src ID check at request channel dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate() dmaengine: avoid non-constant format string dmaengine: imx-dma: Remove i.MX21 support dt-bindings: dma: fsl,imx-dma: Document the DMA clocks dmaengine: Loongson1: Add Loongson-1 APB DMA driver dt-bindings: dma: Add Loongson-1 APB DMA dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform dmaengine: ti: k3-udma: Remove unused declarations dmaengine: amd: qdma: Add AMD QDMA driver dmaengine: xilinx: dpdma: Add support for cyclic dma mode dma: ipu: Remove include/linux/dma/ipu-dma.h dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh" dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma ...
2024-09-23Merge tag 'phy-for-6.12' of ↵Linus Torvalds27-602/+1004
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hw support: - Rcar usb2 support for RZ/G3S SoC - Nuvoton MA35 SoC USB 2.0 PHY driver Removed: - obsolete qcom,usb-8x16-phy bindings Updates: - 4 lane PCIe support for Qualcomm X1E80100 - Constify structure in subsystem update - Subsystem simplification with scoped for each OF child loop update - Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy bindings" * tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits) phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings phy: renesas: rcar-gen3-usb2: Add support to initialize the bus phy: ti: j721e-wiz: Simplify with scoped for each OF child loop phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code phy: ti: gmii-sel: Simplify with dev_err_probe() phy: ti: am654-serdes: Use scoped device node handling to simplify error paths phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop phy: mediatek: xsphy: Simplify with scoped for each OF child loop phy: mediatek: tphy: Simplify with scoped for each OF child loop phy: hisilicon: usb2: Simplify with scoped for each OF child loop phy: cadence: sierra: Simplify with scoped for each OF child loop phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings phy: qcom: qmp-pcie: Configure all tables on port B PHY phy: airoha: adjust initialization delay in airoha_pcie_phy_init() dt-bindings: phy: socionext,uniphier: add top-level constraints phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100 ...
2024-09-23Merge tag 'soundwire-6.12-rc1' of ↵Linus Torvalds6-25/+68
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - bus cleanup for warnings and probe deferral errors suppression - cadence recheck for status with a delayed work - intel interrupt rework on reset exit * tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel_bus_common: enable interrupts before exiting reset soundwire: cadence: re-check Peripheral status with delayed_work soundwire: bus: clean up probe warnings soundwire: bus: drop unused driver name field soundwire: bus: suppress probe deferral errors
2024-09-23Merge tag 'linux-watchdog-6.12-rc1' of ↵Linus Torvalds9-46/+324
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Watchdog Timer driver for RZ/V2H(P) - Add Cirrus EP93x - Some small fixes and improvements * tag 'linux-watchdog-6.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Convert comma to semicolon watchdog: rzv2h_wdt: Add missing MODULE_LICENSE tag to fix modpost error dt-bindings: watchdog: Add Cirrus EP93x dt-bindings: watchdog: stm32-iwdg: Document interrupt and wakeup properties drivers: watchdog: marvell_gti: Convert comma to semicolon watchdog: iTCO_wdt: Convert comma to semicolon watchdog: Add Watchdog Timer driver for RZ/V2H(P) dt-bindings: watchdog: renesas,wdt: Document RZ/V2H(P) SoC watchdog: imx_sc_wdt: detect if already running watchdog: imx2_wdt: Remove __maybe_unused notations watchdog: imx_sc_wdt: Don't disable WDT in suspend watchdog: imx7ulp_wdt: move post_rcs_wait into struct imx_wdt_hw_feature
2024-09-23Merge tag 'pinctrl-v6.12-1' of ↵Linus Torvalds62-527/+4970
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Add support for "input-schmitt-microvolt" property, as used in the Sophgo SoC New drivers: - Mobileye EyeQ5 pin controller, I think this is an automotive SoC - Rockchip rk3576 pin control support - Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000 Improvements: - Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a few other drivers" * tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits) pinctrl: intel: Constify struct intel_pinctrl parameter pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs() pinctrl: baytrail: Drop duplicate return statement pinctrl: intel: Inline intel_gpio_community_irq_handler() dt-bindings: pinctrl: qcom: add missing type to GPIO hogs pinctrl: madera: Simplify with dev_err_probe() pinctrl: k210: Use devm_clk_get_enabled() helpers pinctrl: Join split messages and remove double whitespace pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function pinctrl: sunxi: Use devm_clk_get_enabled() helpers pinctrl: sophgo: cv18xx: fix missed __iomem type identifier pinctrl: stmfx: Use string_choices API instead of ternary operator pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al. pinctrl: intel: Constify intel_get_community() returned object pinctrl: intel: Implement high impedance support pinctrl: intel: Add __intel_gpio_get_direction() helper ...
2024-09-23Merge tag 'ntb-6.12' of https://github.com/jonmason/ntbLinus Torvalds7-15/+31
Pull PCIe non-transparent bridge updates from Jon Mason: "Bug fixes for intel ntb driver debugfs, use after free in switchtec driver, ntb transport rx ring buffers. Also, cleanups in printks, kernel-docs, and idt driver comment" * tag 'ntb-6.12' of https://github.com/jonmason/ntb: ntb: Force physically contiguous allocation of rx ring buffers ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition ntb: idt: Fix the cacography in ntb_hw_idt.c NTB: epf: don't misuse kernel-doc marker NTB: ntb_transport: fix all kernel-doc warnings ntb: Constify struct bus_type ntb_perf: Fix printk format ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
2024-09-23Merge tag 'firewire-updates-6.12' of ↵Linus Torvalds10-765/+1003
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Takashi Sakamoto: "In the FireWire subsystem, tasklets have been used as the bottom half of 1394 OHCi hardIRQ. In recent kernel updates, BH workqueues have become available, and some developers have proposed replacing the tasklet with a BH workqueue. As a first step towards dropping tasklet use, the 1394 OHCI isochronous context can use regular workqueues. In this context, the batch of packets is processed in the specific queue, thus the timing jitter caused by task scheduling is not so critical. Additionally, DMA transmission can be scheduled per-packet basis, therefore the context can be sleep between the operation of transmissions. Furthermore, in-kernel protocol implementation involves some CPU-bound tasks, which can sometimes consumes CPU time so long. These characteristics suggest that normal workqueues are suitable, through BH workqueues are not. The replacement with a workqueue allows unit drivers to process the content of packets in non-atomic context. It brings some reliefs to some drivers in sound subsystem that spin-lock is not mandatory anymore during isochronous packet processing. Summary: - Replace tasklet with workqueue for isochronous context - Replace IDR with XArray - Utilize guard macro where possible - Print deprecation warning when enabling debug parameter of firewire-ohci module - Switch to nonatomic PCM operation" * tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (55 commits) firewire: core: rename cause flag of tracepoints event firewire: core: update documentation of kernel APIs for flushing completions firewire: core: add helper function to retire descriptors Revert "firewire: core: move workqueue handler from 1394 OHCI driver to core function" Revert "firewire: core: use mutex to coordinate concurrent calls to flush completions" firewire: core: use mutex to coordinate concurrent calls to flush completions firewire: core: move workqueue handler from 1394 OHCI driver to core function firewire: core: fulfill documentation of fw_iso_context_flush_completions() firewire: core: expose kernel API to schedule work item to process isochronous context firewire: core: use WARN_ON_ONCE() to avoid superfluous dumps ALSA: firewire: use nonatomic PCM operation firewire: core: non-atomic memory allocation for isochronous event to user client firewire: ohci: operate IT/IR events in sleepable work process instead of tasklet softIRQ firewire: core: add local API to queue work item to workqueue specific to isochronous contexts firewire: core: allocate workqueue to handle isochronous contexts in card firewire: ohci: obsolete direct usage of printk_ratelimit() firewire: ohci: deprecate debug parameter firewire: core: update fw_device outside of device_find_child() firewire: ohci: fix error path to detect initiated reset in TI TSB41BA3D phy firewire: core/ohci: minor refactoring for computation of configuration ROM size ...
2024-09-23Merge tag 'pci-v6.12-changes' of ↵Linus Torvalds68-1164/+2756
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...
2024-09-23Merge tag 'pull-stable-struct_fd' of ↵Linus Torvalds10-36/+36
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 'struct fd' updates from Al Viro: "Just the 'struct fd' layout change, with conversion to accessor helpers" * tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: add struct fd constructors, get rid of __to_fd() struct fd: representation change introduce fd_file(), convert all accessors to it.
2024-09-23s390/vfio-ap: Driver feature advertisementJason J. Herne1-0/+13
Advertise features of the driver for the benefit of automated tooling like Libvirt and mdevctl. Signed-off-by: Jason J. Herne <[email protected]> Reviewed-by: Anthony Krowiak <[email protected]> Reviewed-by: Boris Fiuczynski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-09-23mfd: atc260x: Convert a bunch of commas to semicolonsChen Ni1-2/+2
Replace a comma between expression statements by a semicolon. Signed-off-by: Chen Ni <[email protected]> Reviewed-by: Cristian Ciocaltea <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDsIlpo Järvinen1-0/+26
Add Intel Panther Lake-H/P PCI IDs. Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDsIlpo Järvinen1-0/+13
Add Intel Arrow Lake-H PCI IDs. Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: tc3589x: Drop vendorless compatible string from match tableRob Herring (Arm)1-2/+0
There's no need to list "tc3589x" in the DT match table. The I2C core will strip any vendor prefix and match against the i2c_device_id table which has an "tc3589x" entry. Probably "tc3589x" and TC3589X_UNKNOWN could be removed altogether. Use of that compatible was only on some STE platforms and was dropped in 2013. There were ABI breaks in 2014 claiming no DTs in the wild. See commit 1637d480f873 ("pinctrl: nomadik: force-convert to generic config bindings"). Signed-off-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped()Jinjie Ruan1-4/+1
Avoids the need for manual cleanup of_node_put() in early exits from the loop. Signed-off-by: Jinjie Ruan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: max77620: Use for_each_child_of_node_scoped()Jinjie Ruan1-3/+2
Avoids the need for manual cleanup of_node_put() in early exits from the loop. Signed-off-by: Jinjie Ruan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strictHans de Goede1-1/+0
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it turns out that the 2G version has a DMI product name of "CHERRYVIEW D1 PLATFORM" where as the 4G version has "CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are unique enough that the product-name check is not necessary. Drop the product-name check so that the existing DMI match for the 4G RAM version also matches the 2G RAM version. Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: cros_ec: Update module descriptionTzung-Bi Shih1-2/+2
The module description can be backtracked to commit e7c256fbfb15 ("platform/chrome: Add Chrome OS EC userspace device interface"). The description became out-of-date after a bunch of changes e.g: - commit 5668bfdd90cd ("platform/chrome: cros_ec_dev - Register cros-ec sensors"). - commit ea01a31b9058 ("cros_ec: Split cros_ec_devs module"). - commit 5e0115581bbc ("cros_ec: Move cros_ec_dev module to drivers/mfd"). Update the description. Signed-off-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: cros_ec: Simplify and clean-up cros_ec_dev_init()Tzung-Bi Shih1-8/+3
Simplify cros_ec_dev_init() by the following changes: - Get rid of label `failed_devreg`. - Remove a redundant space and comment. - Use `if (ret)` instead of `if (ret < 0)`. Signed-off-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23mfd: rk8xx: Add support for rk806 on i2c busDetlev Casanova1-0/+25
The ArmSoM Sige 5 board connects the rk806 PMIC on an i2c bus. Signed-off-by: Detlev Casanova <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-09-23drm/panthor: Fix race when converting group handle to group objectSteven Price1-2/+14
XArray provides it's own internal lock which protects the internal array when entries are being simultaneously added and removed. However there is still a race between retrieving the pointer from the XArray and incrementing the reference count. To avoid this race simply hold the internal XArray lock when incrementing the reference count, this ensures there cannot be a racing call to xa_erase(). Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Steven Price <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-09-23dm vdo: handle unaligned discards correctlyMatthew Sakai1-6/+9
Reset the data_vio properly for each discard block, and delay acknowledgement and cleanup until all discard blocks are complete. Signed-off-by: Matthew Sakai <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]>
2024-09-23net: cirrus: use u8 for addr to calm down sparseNikita Shubin1-1/+3
ep93xx_eth.c:805:40: sparse: sparse: incorrect type in argument 2 (different address spaces) ep93xx_eth.c:805:40: sparse: expected unsigned char const [usertype] *addr ep93xx_eth.c:805:40: sparse: got void [noderef] __iomem * Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: 858555bb5598 ("net: cirrus: add DT support for Cirrus EP93xx") Signed-off-by: Nikita Shubin <[email protected]> Acked-by: Alexander Sverdlin <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-22cxl: Calculate region bandwidth of targets with shared upstream linkDave Jiang6-10/+537
The current bandwidth calculation aggregates all the targets. This simple method does not take into account where multiple targets sharing under a switch or a root port where the aggregated bandwidth can be greater than the upstream link of the switch. To accurately account for the shared upstream uplink cases, a new update function is introduced by walking from the leaves to the root of the hierarchy and clamp the bandwidth in the process as needed. This process is done when all the targets for a region are present but before the final values are send to the HMAT handling code cached access_coordinate targets. The original perf calculation path was kept to calculate the latency performance data that does not require the shared link consideration. The shared upstream link calculation is done as a second pass when all the endpoints have arrived. Testing is done via qemu with CXL hierarchy. run_qemu[1] is modified to support several CXL hierarchy layouts. The following layouts are tested: HB: Host Bridge RP: Root Port SW: Switch EP: End Point 2 HB 2 RP 2 EP: resulting bandwidth: 624 1 HB 2 RP 2 EP: resulting bandwidth: 624 2 HB 2 RP 2 SW 4 EP: resulting bandwidth: 624 Current testing, perf number from SRAT/HMAT is hacked into the kernel code. However with new QEMU support of Generic Target Port that's incoming, the perf data injection is no longer needed. [1]: https://github.com/pmem/run_qemu Suggested-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/linux-cxl/[email protected]/ Reviewed-by: Jonathan Cameron <[email protected]> Reviewed-by: Alison Schofield <[email protected]> Acked-by: Dan Williams <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Dave Jiang <[email protected]>
2024-09-22cxl: Preserve the CDAT access_coordinate for an endpointDave Jiang2-4/+8
Keep the access_coordinate from the CDAT tables for region perf calculations. The region perf calculation requires all participating endpoints to have arrived in order to determine if there are limitations of bandwidth data due to shared uplink. Reviewed-by: Jonathan Cameron <[email protected]> Reviewed-by: Ira Weiny <[email protected]> Acked-by: Dan Williams <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Dave Jiang <[email protected]>
2024-09-22mailbox: Use of_property_match_string() instead of open-codingRob Herring (Arm)1-16/+6
Use of_property_match_string() instead of open-coding the search. With this, of_get_property() can be removed as there is no need to check for "mbox-names" presence first. This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2024-09-22mailbox: bcm2835: Fix timeout during suspend modeStefan Wahren1-1/+2
During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: https://github.com/raspberrypi/firmware/issues/1894 Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2024-09-22mailbox: sprd: Use devm_clk_get_enabled() helpersHuan Yang1-21/+4
The devm_clk_get_enabled() helpers: - call devm_clk_get() - call clk_prepare_enable() and register what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the calls to clk_disable_unprepare(). Due to clk only used in probe, not in suspend\resume, this pointer can remove from sprd_mbox_priv to save a little memory. Signed-off-by: Huan Yang <[email protected]> Reviewed-by: Christophe JAILLET <[email protected]> Reviewed-by: Baolin Wang <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2024-09-22mailbox: rockchip: fix a typo in module autoloadingLiao Chen1-1/+1
MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module properly autoloaded based on the alias from of_device_id table. It should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match', just fix it. Fixes: f70ed3b5dc8b ("mailbox: rockchip: Add Rockchip mailbox driver") Signed-off-by: Liao Chen <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2024-09-22mailbox: imx: use device name in interrupt namePeng Fan1-3/+3
There are several MUs for different usage, SCMI MU, ELE MU, RemotePROC MU. Using "imx_mu_chan" in interrupt name would be hard to identify which MU triggers interrupt, so use device name to make it easy to know which MU triggers which interrupt. Signed-off-by: Peng Fan <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2024-09-22mailbox: ARM_MHU_V3 should depend on ARM64Geert Uytterhoeven1-0/+1
The ARM MHUv3 controller is only present on ARM64 SoCs. Hence add a dependency on ARM64, to prevent asking the user about this driver when configuring a kernel for a different architecture than ARM64. Fixes: ca1a8680b134b5e6 ("mailbox: arm_mhuv3: Add driver") Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Sudeep Holla <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2024-09-22net: sparx5: Fix invalid timestampsAakash Menon1-1/+5
Bit 270-271 are occasionally unexpectedly set by the hardware. This issue was observed with 10G SFPs causing huge time errors (> 30ms) in PTP. Only 30 bits are needed for the nanosecond part of the timestamp, clear 2 most significant bits before extracting timestamp from the internal frame header. Fixes: 70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping") Signed-off-by: Aakash Menon <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-09-22dma-mapping: fix vmap and mmap of noncontiougs allocationsChristoph Hellwig1-0/+33
Commit b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu") switched to use direct calls to dma-iommu, but missed the dma_vmap_noncontiguous, dma_vunmap_noncontiguous and dma_mmap_noncontiguous behavior keyed off the presence of the alloc_noncontiguous method. Fix this by removing the now unused alloc_noncontiguous and free_noncontiguous methods and moving the vmapping and mmaping of the noncontiguous allocations into the iommu code, as it is the only provider of actually noncontiguous allocations. Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu") Reported-by: Xi Ruoyao <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Tested-by: Xi Ruoyao <[email protected]>
2024-09-22RDMA/bnxt_re: Remove the unused variable en_devJiapeng Chong1-2/+0
Variable en_dev is not effectively used, so delete it. drivers/infiniband/hw/bnxt_re/main.c:1980:22: warning: variable ‘en_dev’ set but not used. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10867 Signed-off-by: Jiapeng Chong <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]>
2024-09-22Input: hynitron_cstxxx - drop explicit initialization of struct ↵Uwe Kleine-König1-1/+1
i2c_device_id::driver_data to 0 These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2024-09-22rtc: rc5t619: use proper module tablesAndreas Kemnade1-2/+11
Avoid requiring MODULE_ALIASES by declaring proper device id tables. Signed-off-by: Andreas Kemnade <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2024-09-22rtc: m48t59: set rangeAlexandre Belloni1-0/+2
The m48t59 leap year calculation will fail in 2100 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2024-09-21clk: Switch back to struct platform_driver::remove()Uwe Kleine-König201-201/+201
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all clk drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Geert Uytterhoeven <[email protected]> # renesas Signed-off-by: Stephen Boyd <[email protected]>
2024-09-21Merge branches 'clk-devm', 'clk-samsung', 'clk-rockchip' and 'clk-qcom' into ↵Stephen Boyd58-2328/+10135
clk-next * clk-devm: clk: provide devm_clk_get_optional_enabled_with_rate() clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data() * clk-samsung: clk: samsung: add top clock support for ExynosAuto v920 SoC clk: samsung: clk-pll: Add support for pll_531x dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings clk: samsung: exynos7885: Add USB related clocks to CMU_FSYS clk: samsung: clk-pll: Add support for pll_1418x clk: samsung: exynosautov9: add dpum clock support dt-bindings: clock: exynosautov9: add dpum clock clk: samsung: exynos7885: Add missing MUX clocks from PLLs in CMU_TOP clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix dt-bindings: clock: exynos7885: Add indices for USB clocks dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices dt-bindings: clock: exynos7885: Fix duplicated binding clk: samsung: exynos850: Add TMU clock dt-bindings: clock: exynos850: Add TMU clock * clk-rockchip: dt-bindings: clock, reset: fix top-comment indentation rk3576 headers clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions clk: rockchip: fix error for unknown clocks clk: rockchip: rk3588: drop unused code clk: rockchip: Add clock controller for the RK3576 clk: rockchip: Add new pll type pll_rk3588_ddr dt-bindings: clock, reset: Add support for rk3576 dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p dt-bindings: clock: rockchip: remove CLK_NR_CLKS and CLKPMU_NR_CLKS clk: rockchip: rk3399: Drop CLK_NR_CLKS CLKPMU_NR_CLKS usage clk: rockchip: rk3368: Drop CLK_NR_CLKS usage clk: rockchip: rk3328: Drop CLK_NR_CLKS usage clk: rockchip: rk3308: Drop CLK_NR_CLKS usage clk: rockchip: rk3288: Drop CLK_NR_CLKS usage clk: rockchip: rk3228: Drop CLK_NR_CLKS usage clk: rockchip: rk3036: Drop CLK_NR_CLKS usage clk: rockchip: px30: Drop CLK_NR_CLKS CLKPMU_NR_CLKS usage clk: rockchip: Set parent rate for DCLK_VOP clock on RK3228 * clk-qcom: (47 commits) clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's clk: qcom: dispcc-sm8250: use special function for Lucid 5LPE PLL clk: qcom: dispcc-sm8250: use CLK_SET_RATE_PARENT for branch clocks clk: qcom: ipq5332: Use icc-clk for enabling NoC related clocks clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src dt-bindings: usb: qcom,dwc3: Update ipq5332 clock details dt-bindings: interconnect: Add Qualcomm IPQ5332 support clk: qcom: gcc-msm8998: Add Q6 BIMC and LPASS core, ADSP SMMU clocks dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions clk: qcom: Fix SM_CAMCC_8150 dependencies clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src clk: qcom: gcc-sc8180x: Fix the sdcc2 and sdcc4 clocks freq table clk: qcom: gcc-sc8180x: Add GPLL9 support dt-bindings: clock: qcom: Add GPLL9 support on gcc-sc8180x clk: qcom: gcc-sc8180x: Register QUPv3 RCGs for DFS on sc8180x clk: qcom: clk-rpmh: Fix overflow in BCM vote dt-bindings: clock: qcom: Drop required-opps in required on SM8650 camcc dt-bindings: clock: qcom: Drop required-opps in required on sm8650 videocc dt-bindings: clock: qcom,qcs404-turingcc: convert to dtschema dt-bindings: clock: Add x1e80100 LPASSCC reset controller ...
Powered by cgit, Gruvboxed by Blaster4385.