| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
change_num_qps() has a lot of multiplications by 2 to convert
the number of VQ pairs to number of VQs. This patch simplifies
the code by doing the VQP -> VQ count conversion at the beginning
in a variable.
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
Unregistering notifiers is a costly operation. Instead of removing
the notifiers during device suspend and adding them back at resume,
simply ignore the call when the device is suspended.
At resume time call queue_link_work() to make sure that the device state
is propagated in case there were changes.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~13 ms to ~2.5 ms.
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
Currently device resume works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device resume.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device resume time is reduced from
~16 ms to ~4.5 ms.
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
Currently device suspend works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device suspend:
1) Suspend all active vqs parallel.
2) Query suspended vqs in parallel.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~37 ms to ~13 ms.
A later patch will remove the link unregister operation which will make
it even faster.
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
Switch firmware vq modify command to be issued via the async API to
allow future parallelization. The new refactored function applies the
modify on a range of vqs and waits for their execution to complete.
For now the command is still used in a serial fashion. A later patch
will switch to modifying multiple vqs in parallel.
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
Switch firmware vq query command to be issued via the async API to
allow future parallelization.
For now the command is still serial but the infrastructure is there
to issue commands in parallel, including ratelimiting the number
of issued async commands to firmware.
A later patch will switch to issuing more commands at a time.
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
Introduce a new function mlx5_vdpa_exec_async_cmds() which
wraps the mlx5_core async firmware command API in a way
that will be used to parallelize certain operation in this
driver.
The wrapper deals with the case when mlx5_cmd_exec_cb() returns
EBUSY due to the command being throttled.
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
mlx5_vdpa_err() was missing. This patch adds it and uses it in the
necessary places.
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
Currently, commands that qualify as throttled can't be used via the
async API. That's due to the fact that the throttle semaphore can sleep
but the async API can't.
This patch allows throttling in the async API by using the tentative
variant of the semaphore and upon failure (semaphore at 0) returns EBUSY
to signal to the caller that they need to wait for the completion of
previously issued commands.
Furthermore, make sure that the semaphore is released in the callback.
Signed-off-by: Dragos Tatulea <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Tested-by: Lei Yang <[email protected]>
|
|
FB_DAMAGE_CLIPS is a plane property for damage handling. Its UAPI
should only use UAPI types. Hence replace struct drm_rect with
struct drm_mode_rect in drm_atomic_plane_set_property(). Both types
are identical in practice, so there's no change in behavior.
Reported-by: Ville Syrjälä <[email protected]>
Closes: https://lore.kernel.org/dri-devel/[email protected]/
Signed-off-by: Thomas Zimmermann <[email protected]>
Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update")
Cc: Lukasz Spintzyk <[email protected]>
Cc: Deepak Rawat <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Thomas Hellstrom <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Simona Vetter <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v5.0+
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This patch fix the following sparse warning by applying
__force cast to pci_ers_result_t and pci_power_t.
drivers/xen/xen-pciback/pci_stub.c:760:16: sparse: warning: cast to restricted pci_ers_result_t
drivers/xen/xen-pciback/conf_space_capability.c:125:22: sparse: warning: cast to restricted pci_power_t
No functional changes intended.
Signed-off-by: Min-Hua Chen <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
This reverts commit ba6353748e71bd1d7e422fec2b5c2e2dfc2e3bd9.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Christoph Hellwig <[email protected]>
Cc: David Jeffery <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Cc: Stuart Hayes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 95dc7565253a8564911190ebd1e4ffceb4de208a.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Christoph Hellwig <[email protected]>
Cc: David Jeffery <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Cc: Stuart Hayes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 8064952c65045f05ee2671fe437770e50c151776.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Christoph Hellwig <[email protected]>
Cc: David Jeffery <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Cc: Stuart Hayes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit ba82e10c3c6b5b5d2c8279a8bd0dae5c2abaacfc.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Christoph Hellwig <[email protected]>
Cc: David Jeffery <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Cc: Stuart Hayes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 4f2c346e621624315e2a1405e98616a0c5ac146f.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Christoph Hellwig <[email protected]>
Cc: David Jeffery <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Cc: Stuart Hayes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
intel_dp_init_connector() is no place for detecting stuff via
DPCD (except perhaps for eDP). Move the colorimetry stuff into
a more appropriate place.
Cc: Jouni Högander <[email protected]>
Fixes: 00076671a648 ("drm/i915/display: Move colorimetry_support from intel_psr to intel_dp")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jouni Högander <[email protected]>
(cherry picked from commit 35dba4834bded843d5416e8caadfe82bd0ce1904)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
On PVH dom0, when passthrough a device to domU, QEMU and xl tools
want to use gsi number to do pirq mapping, see QEMU code
xen_pt_realize->xc_physdev_map_pirq, and xl code
pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi
number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different
spaces, so pirq mapping fails.
And in current linux codes, there is no method to get gsi
for userspace.
For above purpose, record gsi of pcistub devices when init
pcistub and add a new syscall into privcmd to let userspace
can get gsi when they have a need.
Signed-off-by: Jiqian Chen <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
Signed-off-by: Jiqian Chen <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
In PVH dom0, the gsis don't get registered, but the gsi of
a passthrough device must be configured for it to be able to be
mapped into a domU.
When assigning a device to passthrough, proactively setup the gsi
of the device during that process.
Signed-off-by: Jiqian Chen <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
Signed-off-by: Jiqian Chen <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
When device on dom0 side has been reset, the vpci on Xen side
won't get notification, so that the cached state in vpci is
all out of date with the real device state.
To solve that problem, add a new function to clear all vpci
device state when device is reset on dom0 side.
And call that function in pcistub_init_device. Because when
using "pci-assignable-add" to assign a passthrough device in
Xen, it will reset passthrough device and the vpci state will
out of date, and then device will fail to restore bar state.
Signed-off-by: Jiqian Chen <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
Signed-off-by: Jiqian Chen <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Any non-posted read should flush the previous write, so we don't
necessarily need to read back the value we just wrote. I've found at
least some controllers that respond with 0 for short moments after
writing the CC register with EN (enable) cleared, so the read-back is
overwriting our valid ctrl_config value and ends up breaking on the
subsequent enabling.
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Commit 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a
separate group") introduced the struct attribute array nvme_tls_attrs.
However, the array was not null terminated and caused BUG KASAN global-
out-of-bounds. To avoid the BUG, null terminate the array.
Reported-by: Yi Zhang <[email protected]>
Closes: https://lore.kernel.org/linux-nvme/jhllwfxcedrcxcnbajwl4x2l2ujcqowqcd4ps574zrafrqhjna@f4icvecutekm/
Fixes: 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a separate group")
Signed-off-by: Shin'ichiro Kawasaki <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
During repetitive namespace remapping operations on the target the
namespace might have changed between the time the initial scan
was performed, and partition scan was invoked by device_add_disk()
in nvme_mpath_set_live(). We then end up with a stuck scanning process:
[<0>] folio_wait_bit_common+0x12a/0x310
[<0>] filemap_read_folio+0x97/0xd0
[<0>] do_read_cache_folio+0x108/0x390
[<0>] read_part_sector+0x31/0xa0
[<0>] read_lba+0xc5/0x160
[<0>] efi_partition+0xd9/0x8f0
[<0>] bdev_disk_changed+0x23d/0x6d0
[<0>] blkdev_get_whole+0x78/0xc0
[<0>] bdev_open+0x2c6/0x3b0
[<0>] bdev_file_open_by_dev+0xcb/0x120
[<0>] disk_scan_partitions+0x5d/0x100
[<0>] device_add_disk+0x402/0x420
[<0>] nvme_mpath_set_live+0x4f/0x1f0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x107/0x120 [nvme_core]
[<0>] nvme_alloc_ns+0xac6/0xe60 [nvme_core]
[<0>] nvme_scan_ns+0x2dd/0x3e0 [nvme_core]
[<0>] nvme_scan_work+0x1a3/0x490 [nvme_core]
This happens when we have several paths, some of which are inaccessible,
and the active paths are removed first. Then nvme_find_path() will requeue
I/O in the ns_head (as paths are present), but the requeue list is never
triggered as all remaining paths are inactive.
This patch checks for NVME_NSHEAD_DISK_LIVE in nvme_available_path(),
and requeue I/O after NVME_NSHEAD_DISK_LIVE has been cleared once
the last path has been removed to properly terminate pending I/O.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e332 ("nvme-multipath: add error handling support for add_disk()")
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix macro for checking minimum GuC version (Michal Wajdeczko)
- Fix CCS offset calculation for some BMG SKUs (Matthew Auld)
- Fix locking on memory usage reporting via fdinfo and BO destroy (Matthew Auld)
- Fix GPU page fault handler on a closed VM (Matthew Brost)
- Fix overflow in oa batch buffer (José)
Signed-off-by: Dave Airlie <[email protected]>
From: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/lr6vhd7x5eb7gubd7utfmnwzvfqfslji4kssxyqisynzlvqjni@svgm6jot7r66
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Fix BMG support to UHBR13.5
- Two PSR fixes
Signed-off-by: Dave Airlie <[email protected]>
From: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
kbuild: doc: replace "gcc" in external module description
kbuild: doc: describe the -C option precisely for external module builds
kbuild: doc: remove the description about shipped files
kbuild: doc: drop section numbering, use references in modules.rst
kbuild: doc: throw out the local table of contents in modules.rst
kbuild: doc: remove outdated description of the limitation on -I usage
kbuild: doc: remove description about grepping CONFIG options
kbuild: doc: update the description about Kbuild/Makefile split
kbuild: remove unnecessary export of RUST_LIB_SRC
kbuild: remove append operation on cmd_ld_ko_o
kconfig: cache expression values
kconfig: use hash table to reuse expressions
kconfig: refactor expr_eliminate_dups()
kconfig: add comments to expression transformations
kconfig: change some expr_*() functions to bool
scripts: move hash function from scripts/kconfig/ to scripts/include/
kallsyms: change overflow variable to bool type
kallsyms: squash output_address()
kbuild: add install target for modules.builtin.ranges
scripts: add verifier script for builtin module range data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This adds support for the I3C HCI controller of the AMD SoC which as
expected requires quirks. Also fixes for the other drivers, including
rate selection fixes for svc.
Core:
- allow adjusting first broadcast address speed
Drivers:
- cdns: few fixes
- mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
get_i3c_mode
- svc: adjust rates, fix race condition"
* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
i3c: master: svc: adjust SDR according to i3c spec
i3c: master: svc: use slow speed for first broadcast address
i3c: master: support to adjust first broadcast address speed
i3c/master: cmd_v1: Fix the rule for getting i3c mode
i3c: master: cdns: fix module autoloading
i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
i3c: mipi-i3c-hci: Add a quirk to set timing parameters
i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
i3c: mipi-i3c-hci: Add a quirk to set PIO mode
i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List
|
|
The TI_K3_M4_REMOTEPROC Kconfig entry selects OMAP2PLUS_MBOX, but that
driver in turn depends on other things, which the k4-m4 driver didn't.
This causes a Kconfig time warning:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
because you can't select something that is unavailable.
Make the dependencies for TI_K3_M4_REMOTEPROC match those of the
OMAP2PLUS_MBOX driver that it needs.
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Cc: Bjorn Andersson <[email protected]>
Cc: Martyn Welch <[email protected]>
Cc: Hari Nagalla <[email protected]>
Cc: Andrew Davis <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Minor cleanup/refactor to the Qualcomm GLINK code, in order to add
trace events related to the messages exchange with the remote side,
useful for debugging a range of interoperability issues
- Rewrite the nested structs with flexible array members in order to
avoid the risk of invalid accesses
* tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
rpmsg: glink: Introduce packet tracepoints
rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
rpmsg: glink: Tidy up RX advance handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
the TI K3 family, support for the modem remoteproc in the Qualcomm
SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
SA8775P.
- Add support for blocking and non-blocking mailbox transmissions to
the i.MX remoteproc driver, and implement poweroff and reboot
mechanisms using them. Plus a few bug fixes and minor improvements.
- Cleanups and bug fixes for the TI K3 DSP and R5F drivers
- Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores
- Use devres helpers for various allocations in the Ingenic, TI DA8xx,
TI Keystone, TI K3, ST slim drivers
- Replace uses of of_{find,get}_property() with of_property_present()
where possible
* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
remoteproc: xlnx: Add sram support
remoteproc: k3-r5: Fix error handling when power-up failed
remoteproc: imx_rproc: Add support for poweroff and reboot
remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
remoteproc: k3-r5: Delay notification of wakeup event
remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
remoteproc: k3: Factor out TI-SCI processor control OF get function
dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
remoteproc: k3-dsp: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Use devm_rproc_alloc() helper
remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
remoteproc: qcom: pas: Add SDX75 remoteproc support
dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
remoteproc: keystone: Use devm_rproc_alloc() helper
remoteproc: keystone: Use devm_kasprintf() to build name string
dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
...
|
|
Pull VFIO updates from Alex Williamson:
"Just a few cleanups this cycle:
- Remove several unused structure and function declarations, and
unused variables (Dr. David Alan Gilbert, Yue Haibing, Zhang Zekun)
- Constify unmodified structure in mdev (Hongbo Li)
- Convert to unsigned type to catch overflow with less fanfare than
passing a negative value to kcalloc() (Dan Carpenter)"
* tag 'vfio-v6.12-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: clean up a type in vfio_pci_ioctl_pci_hot_reset_groups()
vfio/mdev: Constify struct kobj_type
vfio: mdev: Remove unused function declarations
vfio/fsl-mc: Remove unused variable 'hwirq'
vfio/pci: Remove unused struct 'vfio_pci_mmap_vma'
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- sort out a few issues with the direct calls to iommu-dma (Christoph
Hellwig, Leon Romanovsky)
* tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: report unlimited DMA addressing in IOMMU DMA path
iommu/dma: remove most stubs in iommu-dma.h
dma-mapping: fix vmap and mmap of noncontiougs allocations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Collection of small cleanup and one fix:
- Sort headers and struct forward declarations
- Fix random selftest failures in some cases due to dirty tracking
tests
- Have the reserved IOVA regions mechanism work when a HWPT is used
as a nesting parent. This updates the nesting parent's IOAS with
the reserved regions of the device and will also install the ITS
doorbell page on ARM.
- Add missed validation of parent domain ops against the current
iommu
- Fix a syzkaller bug related to integer overflow during ALIGN()
- Tidy two iommu_domain attach paths"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Set iommu_attach_handle->domain in core
iommufd: Avoid duplicated __iommu_group_set_core_domain() call
iommufd: Protect against overflow of ALIGN() during iova allocation
iommufd: Reorder struct forward declarations
iommufd: Check the domain owner of the parent before creating a nesting domain
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
iommufd/selftest: Fix buffer read overrrun in the dirty test
iommufd: Reorder include files
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support using Zkr to seed KASLR
- Support IPI-triggered CPU backtracing
- Support for generic CPU vulnerabilities reporting to userspace
- A few cleanups for missing licenses
- The size limit on the XIP kernel has been removed
- Support for tracing userspace stacks
- Support for the Svvptc extension
- Various cleanups and fixes throughout the tree
* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
crash: Fix riscv64 crash memory reserve dead loop
perf/riscv-sbi: Add platform specific firmware event handling
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
ACPI: RISCV: Make acpi_numa_get_nid() to be static
riscv: Randomize lower bits of stack address
selftests: riscv: Allow mmap test to compile on 32-bit
riscv: Make riscv_isa_vendor_ext_andes array static
riscv: Use LIST_HEAD() to simplify code
riscv: defconfig: Disable RZ/Five peripheral support
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
riscv: avoid Imbalance in RAS
riscv: cacheinfo: Add back init_cache_level() function
riscv: Remove unused _TIF_WORK_MASK
drivers/perf: riscv: Remove redundant macro check
riscv: define ILLEGAL_POINTER_VALUE for 64bit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Disable buggy p10 aes-gcm code on powerpc
- Fix module aliases in paes_s390
- Fix buffer overread in caam
* tag 'v6.12-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: powerpc/p10-aes-gcm - Disable CRYPTO_AES_GCM_P10
crypto: s390/paes - Fix module aliases
crypto: caam - Pad SG length when allocating hash edesc
|
|
ACPI boot does not provide clocks and regulators, but instead, provides
the PCLK rate directly, and enables the clock in firmware. So deal
gracefully with this.
Fixes: 55750148e559 ("i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()")
Cc: [email protected] # v6.10+
Cc: Andi Shyti <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
It was observed that issuing the ABORT bit (IC_ENABLE[1]) will not
work when IC_ENABLE is already disabled.
Check if the ENABLE bit (IC_ENABLE[0]) is disabled when the controller
is holding SCL low. If the ENABLE bit is disabled, the software needs
to enable it before trying to issue the ABORT bit. otherwise,
the controller ignores any write to ABORT bit.
These kernel logs show up whenever an I2C transaction is
attempted after this failure.
i2c_designware e95e0000.i2c: timeout waiting for bus ready
i2c_designware e95e0000.i2c: timeout in disabling adapter
The patch fixes the issue where the controller cannot be disabled
while SCL is held low if the ENABLE bit is already disabled.
Fixes: 2409205acd3c ("i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low")
Signed-off-by: Kimriver Liu <[email protected]>
Cc: <[email protected]> # v6.6+
Reviewed-by: Mika Westerberg <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
The largest infoframe we create is the DRM (Dynamic Range Mastering)
infoframe which is 26 bytes + a 4 byte header, for a total of 30
bytes.
With HDMI_MAX_INFOFRAME_SIZE set to 29 bytes, as it is now, we
allocate too little space to pack a DRM infoframe in
write_device_infoframe(), leading to an ENOSPC return from
hdmi_infoframe_pack(), and never calling the connector's
write_infoframe() vfunc.
Instead of having HDMI_MAX_INFOFRAME_SIZE defined in two places,
replace HDMI_MAX_INFOFRAME_SIZE with HDMI_INFOFRAME_SIZE(MAX) and make
MAX 27 bytes - which is defined by the HDMI specification to be the
largest infoframe payload.
Fixes: f378b77227bc ("drm/connector: hdmi: Add Infoframes generation")
Fixes: c602e4959a0c ("drm/connector: hdmi: Create Infoframe DebugFS entries")
Signed-off-by: Derek Foreman <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce
this[1], one bond device (bond1) has xdpdrv, which increases
bpf_master_redirect_enabled_key. Another bond device (bond0) which is
unsupported by XDP but its slave (veth3) has xdpgeneric that returns
XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect().
To reduce unnecessary warnings and improve log management, we need to
delete the WARN_ON_ONCE() and add ratelimit to the netdev_err().
[1] Steps to reproduce:
# Needs tx_xdp with return XDP_TX;
ip l add veth0 type veth peer veth1
ip l add veth3 type veth peer veth4
ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP
ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default
ip l set veth0 master bond1
ip l set bond1 up
# Increases bpf_master_redirect_enabled_key
ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx
ip l set veth3 master bond0
ip l set bond0 up
ip l set veth4 up
# Triggers WARN_ON_ONCE() from the xdp_master_redirect()
ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=c187823a52ed505b2257
Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Jiwon Kim <[email protected]>
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a missing MODULE_FIRMWARE entry.
Fixes: 69cb89981c7a ("r8169: add support for RTL8126A rev.b")
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The RX frame size limit should not be based on the current MTU setting.
Instead it should be based on the hardware capabilities.
While we're here, improve the description of the receive frame length
setting as suggested by Niklas.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Paul Barker <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The datasheets for all SoCs using the GbEth IP specify a maximum
transmission frame size of 1.5 kByte. I've confirmed through internal
discussions that support for 1522 byte frames has been validated, which
allows us to support the default MTU of 1500 bytes after reserving space
for the Ethernet header, frame checksums and an optional VLAN tag.
Fixes: 2e95e08ac009 ("ravb: Add rx_max_buf_size to struct ravb_hw_info")
Reviewed-by: Niklas Söderlund <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Paul Barker <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider
when offload is disabled") allows the "port_transmit_rate_kbps" to be
set to a value of 0, which is then passed to the "div_s64" function when
tc-cbs is disabled. This leads to a zero-division error.
When tc-cbs is disabled, the idleslope, sendslope, and credit values the
credit values are not required to be configured. Therefore, adding a return
statement after setting the txQ mode to DCB when tc-cbs is disabled would
prevent a zero-division error.
Fixes: b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled")
Cc: <[email protected]>
Co-developed-by: Choong Yong Liang <[email protected]>
Signed-off-by: Choong Yong Liang <[email protected]>
Signed-off-by: KhaiWenTan <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
RTL8125 added fields to the tally counter, what may result in the chip
dma'ing these new fields to unallocated memory. Therefore make sure
that the allocated memory area is big enough to hold all of the
tally counter values, even if we use only parts of it.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Cc: [email protected]
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
for_each_set_bit was used wrongly in aqr107_config_init() when iterating
over LEDs. Drop misleading 'index' variable and call
aqr_phy_led_active_low_set() for each set bit representing an LED which
is driven by VDD instead of GND pin.
Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Link: https://patch.msgid.link/9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <[email protected]>
|
|
phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting
in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit.
Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit.
Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Link: https://patch.msgid.link/ab963584b0a7e3b4dac39472a4b82ca264d79630.1726580902.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes: 673b2fe6ff1d ("scsi: ata: libata-scsi: Add support for CDL pages mode sense")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
|