| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The pinned pages are only relevant when it starts iterating the bitmap so
defer that into iova_bitmap_for_each().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Matt Ochs <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The amount of IOVA mapped will be used more often in iova_bitmap_set() in
preparation to dynamically iterate the bitmap. Cache said length to avoid
having to calculate it all the time.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Matt Ochs <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
After iova_bitmap_set_ahead() returns it may be at the end of the range.
Move iova_bitmap_set_ahead() earlier to avoid unnecessary attempt in
trying to pin the next pages by reusing iova_bitmap_done() check.
Fixes: 2780025e01e2 ("iommufd/iova_bitmap: Handle recording beyond the mapped pages")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Matt Ochs <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Do not set a hugepage-aligned IOVA for incrementing an IOVA, to better
match current IOMMU driver implementations. Keep the logic of clearing all
IOPTE dirty bits for a whole hugepage, even if the range being dirtied
starts from part of the hugepage. This is also similar to AMD driver (iommu
v1 format) where IOMMU uses various subpage PTE data for dirty tracking
(for non-standard page sizes).
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Matt Ochs <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The calculation returns 0 if it sets less than the number of bits per
byte. For calculating memory allocation from bits, lets round it up to
one byte.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Matt Ochs <[email protected]>
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Tested-by: Matt Ochs <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
ports member of 'struct mxser_board' triggers this restriction,
resulting in:
drivers/tty/mxser.c:291:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct mxser_port' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
291 | struct mxser_port ports[] __counted_by(nports);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: <[email protected]>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2026
Fixes: f34907ecca71 ("mxser: Annotate struct mxser_board with __counted_by")
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/20240529-drop-counted-by-ports-mxser-board-v1-1-0ab217f4da6d@kernel.org
Signed-off-by: Kees Cook <[email protected]>
|
|
Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting additional functions found in the vendor version, such as long
onkey and GPIO integration.
Signed-off-by: Karel Balej <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Support the LDO and buck regulators of the Marvell 88PM886 PMIC.
Signed-off-by: Karel Balej <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Marvell 88PM886 is a PMIC which provides various functions such as
onkey, battery, charger and regulators. It is found for instance in the
samsung,coreprimevelte smartphone with which this was tested. Implement
basic support to allow for the use of regulators and onkey.
Signed-off-by: Karel Balej <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.
The input driver provides the interface for control of
haptic effects through the device.
Signed-off-by: James Ogletree <[email protected]>
Reviewed-by: Jeff LaBundy <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.
The MFD component registers and initializes the device.
Signed-off-by: James Ogletree <[email protected]>
Reviewed-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
A write sequence is a sequence of register addresses
and values executed by some Cirrus DSPs following
certain power state transitions.
Add support for Cirrus drivers to update or add to a
write sequence present in firmware.
Reviewed-by: Charles Keepax <[email protected]>
Signed-off-by: James Ogletree <[email protected]>
Reviewed-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
We got another report that CT1000BX500SSD1 does not work with LPM.
If you look in libata-core.c, we have six different Crucial devices that
are marked with ATA_HORKAGE_NOLPM. This model would have been the seventh.
(This quirk is used on Crucial models starting with both CT* and
Crucial_CT*)
It is obvious that this vendor does not have a great history of supporting
LPM properly, therefore, add the ATA_HORKAGE_NOLPM quirk for all Crucial
BX SSD1 models.
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: [email protected]
Reported-by: Alessandro Maggio <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/arm
Arm Vexpress updates for v6.11
Remove obsolete RTSM DCSCB support which was only ever implemented
on a software model which is neither available to download nor
maintained. It predates the very first bL cluster based platforms.
Other change include addition of the missing MODULE_DESCRIPTION
macro in vexpress config bus driver.
* tag 'vexpress-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
drm_edid_to_sad() might return an error or just zero. If that is the
case, we must not free the SADs because there was no allocation in
the first place.
Fixes: dab12fa8d2bd ("drm/mediatek/dp: fix memory leak on ->get_edid callback audio detection")
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/raw3270.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/con3270.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/fs3270.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/block/dcssblk.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/20240615-md-s390-drivers-s390-block-dcssblk-v1-1-d9d19703abcb@quicinc.com
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Add support for the Xylanta SAINT3 product family.
Cc: Andy Jackson <[email protected]>
Cc: Ken Aitchison <[email protected]>
Tested-by: Andy Jackson <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
mtk_find_possible_crtcs() assumes that the main path will always have
the CRTC with id 0, the ext id 1 and the third id 2. This is only true
if the paths are all available. But paths are optional (see also
comment in mtk_drm_kms_init()), e.g. the main path might not be enabled
or available at all. Then the CRTC IDs will shift one up, e.g. ext will
be 0 and the third path will be 1.
To fix that, dynamically calculate the IDs by the presence of the paths.
While at it, make the return code a signed one and return -ENODEV if no
path is found and handle the error in the callers.
Fixes: 5aa8e7647676 ("drm/mediatek: dpi/dsi: Change the getting possible_crtc way")
Suggested-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
ConnectX devices lack ability to count payload data byte size which is
needed for SA to return to libreswan for rekeying.
As a solution let's approximate that by decreasing headers size from
total size counted by flow steering. The calculation doesn't take into
account any other headers which can be in the packet (e.g. IP extensions).
Fixes: 5a6cddb89b51 ("net/mlx5e: Update IPsec per SA packets/bytes count")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
IPsec SA statistics presents successfully decrypted and encrypted
packet and bytes, and not total handled by this SA. So update the
calculation logic to take into account failures.
Fixes: 6fb7f9408779 ("net/mlx5e: Connect mlx5 IPsec statistics with XFRM core")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In the cited commit, mqprio_rl cleanup and free are mistakenly removed
in mlx5e_priv_cleanup(), and it causes the leakage of host memory and
firmware SCHEDULING_ELEMENT objects while changing eswitch mode. So,
add them back.
Fixes: 0bb7228f7096 ("net/mlx5e: Fix mqprio_rl handling on devlink reload")
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Dragos Tatulea <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, ingress acl is used for three features. It is created only
when vport metadata match and prio tag are enabled. But active-backup
lag mode also uses it. It is independent of vport metadata match and
prio tag. And vport metadata match can be disabled using the
following devlink command:
# devlink dev param set pci/0000:08:00.0 name esw_port_metadata \
value false cmode runtime
If ingress acl is not created, will hit panic when creating drop rule
for active-backup lag mode. If always create it, there will be about
5% performance degradation.
Fix it by creating ingress acl when needed. If esw_port_metadata is
true, ingress acl exists, then create drop rule using existing
ingress acl. If esw_port_metadata is false, create ingress acl and
then create drop rule.
Fixes: 1749c4c51c16 ("net/mlx5: E-switch, add drop rule support to ingress ACL")
Signed-off-by: Chris Mi <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Due a bug in the device max_num_eqs doesn't always reflect a written
value. As a result, setting max_io_eqs may not work but appear
successful. Instead write max_num_eqs_24b, which reflects correct
value.
Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function")
Signed-off-by: Daniel Jurgens <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A new capability with more bits is added. If it's set use that value as
the maximum number of EQs available.
This cap is also writable by the vhca_resource_manager to allow limiting
the number of EQs available to SFs and VFs.
Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function")
Signed-off-by: Daniel Jurgens <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Reviewed-by: William Tu <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In TBT-alt mode the driver doesn't program the PHY's PLL, which is
handled instead by Thunderbolt driver/FW components, hence the PLL's HW
vs. SW state verification should be skipped. During HW readout set a flag
in the PLL state if the port was at the moment in TBT-alt mode and skip
the verification of PLL parameters in this case.
Fixes: 45fe957ae769 ("drm/i915/display: Add compare config for MTL+ platforms")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11258
Cc: Mika Kahola <[email protected]>
Reviewed-by: Mika Kahola <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement the ethtool_ops::set_module_eeprom_by_page operation to allow
ethtool to write to a transceiver module EEPROM, in a similar fashion to
the ethtool_ops::get_module_eeprom_by_page operation.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
DSISRC __________
__\_
| \
pll4_p_ck ->| 1 |____dsi_k
ck_dsi_phy ->| 0 |
|____/
A DSI clock is missing in the clock framework. Looking at the
clk_summary, it appears that 'ck_dsi_phy' is not implemented. Since the
DSI kernel clock is based on the internal DSI pll. The common clock
driver can not directly expose this 'ck_dsi_phy' clock because it does
not contain any common registers with the DSI. Thus it needs to be done
directly within the DSI phy driver.
Signed-off-by: Raphael Gallais-Pou <[email protected]>
Acked-by: Yannick Fertre <[email protected]>
Tested-by: Yannick Fertre <[email protected]>
Signed-off-by: Philippe Cornu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Update control of clocks and supply thanks to the PM runtime
mechanism to avoid kernel crash during a system suspend.
Signed-off-by: Yannick Fertre <[email protected]>
Signed-off-by: Raphael Gallais-Pou <[email protected]>
Acked-by: Yannick Fertre <[email protected]>
Tested-by: Yannick Fertre <[email protected]>
Signed-off-by: Philippe Cornu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use RUNTIME_PM_OPS() instead of the old SET_SYSTEM_SLEEP_PM_OPS().
This means we don't need __maybe_unused on the functions.
Signed-off-by: Raphael Gallais-Pou <[email protected]>
Acked-by: Yannick Fertre <[email protected]>
Tested-by: Yannick Fertre <[email protected]>
Signed-off-by: Philippe Cornu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The Low-Voltage Differential Signaling (LVDS) Display Interface
Transmitter handles the LVDS protocol: it maps the pixels received from
the upstream Pixel-DMA LCD-TFT Display Controller (LTDC) onto the LVDS
PHY.
It is composed of three sub blocks:
* LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps
its input pixels onto the data lanes of the PHY
* LVDS PHY: parallelize the data and drives the LVDS data lanes
* LVDS wrapper: handles top-level settings
The LVDS controller driver supports the following high-level features:
* FDP-Link-I and OpenLDI (v0.95) protocols
* Single-Link or Dual-Link operation
* Single-Display or Double-Display (with the same content
duplicated on both)
* Flexible Bit-Mapping, including JEIDA and VESA
* RGB888 or RGB666 output
* Synchronous design, with one input pixel per clock cycle
Signed-off-by: Raphael Gallais-Pou <[email protected]>
Acked-by: Yannick Fertre <[email protected]>
Signed-off-by: Philippe Cornu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This driver does not have the function to adjust the orientation,
so this function is added.
Signed-off-by: Zhaoxiong Lv <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The K&d kd101ne3-40ti is a 10.1" WXGA TFT-LCD panel, use
jd9365da controller,which fits in nicely with the existing
panel-jadard-jd9365da-h3 driver.Hence,we add a new compatible
with panel specific config.
Although they have the same control IC, the two panels are different,
and the timing will be slightly different, so we added some variables
in struct jadard_panel_desc to control the timing.
Signed-off-by: Zhaoxiong Lv <[email protected]>
Acked-by: Jessica Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Remove conditional code and always use mipi_dsi_dcs_*multi() wrappers to
simplify driver's init/enable/exit code.
Signed-off-by: Zhaoxiong Lv <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently, the init_code of the jd9365da driver is placed
in the enable() function and sent, but this seems to take
a long time. It takes 17ms to send each instruction (an init
code consists of about 200 instructions), so it takes
about 3.5s to send the init_code. So we moved the sending
of the inti_code to the prepare() function, and each
instruction seemed to take only 25μs.
We checked the DSI host and found that the difference in
command sending time is caused by the different modes of
the DSI host in prepare() and enable() functions.
Our DSI Host only supports sending cmd in LP mode, The
prepare() function can directly send init_code (LP->cmd)
in LP mode, but the enable() function is in HS mode and
needs to switch to LP mode before sending init code
(HS->LP->cmd->HS). Therefore, it takes longer to send
the command.
Signed-off-by: Zhaoxiong Lv <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for the AUO G104STN01 10.4" (800x600) LCD-TFT panel.
Signed-off-by: Paul Gerber <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This flag is annoying because it puts a lot of logic into mac80211
that could just as well be in the driver (only iwlmvm uses it) and
the implementation is also broken for MLO.
Remove the flag in favour of calling drv_mgd_prepare_tx() without
any conditions even for the deauth-while-assoc case. The drivers
that implement it can take the appropriate actions, which for the
only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky
than the implementation in mac80211 is anyway, and all others have
no need and can just exit if info->was_assoc is set.
Reviewed-by: Miriam Rachel Korenblit <[email protected]>
Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Some kernel-doc in the header file was mismatched, fix that.
Reviewed-by: Miriam Rachel Korenblit <[email protected]>
Link: https://patch.msgid.link/20240627104621.3b2dd62adb2c.I8a4c469b674e5eac737378a1ed2358b57d01613f@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/fsl-dpaa2-qdma/dpdmai.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-dma-fsl-dpaa2-qdma-v1-1-815d148740e6@quicinc.com
Signed-off-by: Vinod Koul <[email protected]>
|
|
'struct m_can_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4806 520 0 5326 14ce drivers/net/can/m_can/m_can_pci.o
After:
=====
text data bss dec hex filename
4862 464 0 5326 14ce drivers/net/can/m_can/m_can_pci.o
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/all/a17b96d1be5341c11f263e1e45c9de1cb754e416.1719172843.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
There is no need to wrap simple variables or multiplications inside
parentheses.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Vincent Mailhol <[email protected]>
Link: https://lore.kernel.org/all/b5aee80895fa029070fd37d1d837cf1c0ecb52dc.1716973640.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Replace the printing of internal numerical values by the printing of
strings reflecting their meaning, to make the message self-explanatory.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Vincent Mailhol <[email protected]>
Link: https://lore.kernel.org/all/14c8c5ce026e9fec128404706d1c73c8ffa11ced.1716973640.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
The main CAN clock is either the internal CANFD clock, or the external
CAN clock. Hence replace the two-valued enum by a simple boolean flag.
Consolidate all CANFD clock handling inside a single branch.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Vincent Mailhol <[email protected]>
Link: https://lore.kernel.org/all/2cf38c10b83c8e5c04d68b17a930b6d9dbf66f40.1716973640.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/k3-udma.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/k3-udma-glue.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/k3-psil-lib.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
With ARCH=arm, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/cppi41.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
With ARCH=loongarch, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/virt-dma.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/20240616-md-loongarch-drivers-dma-virt-dma-v1-1-70ed3dcbf8aa@quicinc.com
Signed-off-by: Vinod Koul <[email protected]>
|
|
Unlike other channel counts in CAPx registers, BCDMA BCHAN CNT doesn't
include UHC and HC BC channels. So include them explicitly to arrive at
total BC channel in the instance.
Fixes: 8844898028d4 ("dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling")
Signed-off-by: Vignesh Raghavendra <[email protected]>
Signed-off-by: Jai Luthra <[email protected]>
Tested-by: Jayesh Choudhary <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Fix the below lockdep assert warning by holding vc.lock for
vchan_get_all_descriptors().
WARNING: virt-dma.h:188 rz_dmac_terminate_all
pc : rz_dmac_terminate_all
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Return clk_prepare_enable() in order to transfer the error if it fails.
Signed-off-by: Chen Ni <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|