aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-01-28USB: serial: mos7720: fix error code in mos7720_write()Dan Carpenter1-1/+3
This code should return -ENOMEM if the kmalloc() fails but instead it returns success. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: fix B0 handlingJohan Hovold1-9/+14
Fix up B0 handling which should leave the baud rate unchanged and specifically not report back a non-B0 rate when B0 is requested; must temporarily disable hardware flow control so that RTS can be deasserted; and should reassert DTR/RTS when moving from B0. Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver") Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: fix pin configurationJohan Hovold1-0/+8
Make sure that the modem pins are set up correctly when opening the port to avoid leaving, for example, DTR and RTS configured as inputs, which is the device default. This is specifically needed to be able to control DTR and RTS when hardware flow control is disabled. Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver") Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: fix gpio-mode handlingJohan Hovold1-6/+3
Fix the gpio-mode handling so that all the pins are under driver control (i.e. in gpio mode) when hardware flow control is disabled. This is specifically needed to be able to control RTS. Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver") Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: simplify line-speed logicJohan Hovold1-2/+1
Simplify the changed-line-speed conditional expression. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: clean up line-settings handlingJohan Hovold1-19/+15
Shift the line-setting values when defining them rather than in set_termios() for consistency and improved readability. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: document vendor-request recipientJohan Hovold1-4/+4
Add the missing device-recipient define to the vendor control requests for completeness. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: use termios flag helpersJohan Hovold1-2/+1
Use the termios flag helpers consistently, including for CRTSCTS. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: use subsystem usb_device at probeJohan Hovold1-2/+1
Use the subsystem struct usb_device pointer at probe instead of deriving it from the interface pointer. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: fix interface leak at disconnectJohan Hovold1-0/+10
Make sure to release the control interface at disconnect so that the driver can be unbound without leaking resources (and later rebound). Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver") Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: xr: fix NULL-deref at probeJohan Hovold1-0/+3
Make sure that the probed device has an interface 0 to avoid dereferencing a NULL pointer in case of a malicious device or during USB-descriptor fuzzing. Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver") Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-26USB: serial: mos7840: fix error code in mos7840_write()Dan Carpenter1-1/+3
This should return -ENOMEM instead of 0 if the kmalloc() fails. Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-21USB: cdc-acm: ignore Exar XR21V141X when serial driver is builtMauro Carvalho Chehab1-0/+6
The Exar XR21V141X can be used in either ACM mode using the cdc-acm driver or in "custom driver" mode in which further features such as hardware and software flow control, GPIO control and in-band line-status reporting are available. In ACM mode the device always enables RTS/CTS flow control, something which could prevent transmission in case the CTS input isn't wired up correctly. Ensure that cdc_acm will not bind to the device if the custom USB-serial driver is enabled. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20201122170822.21715-4-mani@kernel.org [ johan: rewrite commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-21USB: serial: add MaxLinear/Exar USB to Serial driverManivannan Sadhasivam3-0/+605
Add support for MaxLinear/Exar USB to Serial converters. This driver only supports XR21V141X series but it can be extended to other series from Exar as well in future. This driver is inspired from the initial one submitted by Patong Yang: https://lore.kernel.org/r/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop While the initial driver was a custom tty USB driver exposing whole new serial interface ttyXRUSBn, this version is completely based on USB serial core thus exposing the interfaces as ttyUSBn. This will avoid the overhead of exposing a new USB serial interface which the userspace tools are unaware of. The Exar XR21V141X can be used in either ACM mode using the cdc-acm driver or in "custom driver" mode in which further features such as hardware and software flow control, GPIO control and in-band line-status reporting are available. In ACM mode the device always enables RTS/CTS flow control, something which could prevent transmission in case the CTS input isn't wired up corrently. A follow-on patch will prevent cdc_acm from binding whenever this driver is enabled. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20201122170822.21715-2-mani@kernel.org [ johan: fix some style nits, group related functions, drop unused callbacks, and amend commit message; a few remaining non-trivial issues will be fixed separately ] Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: f81534: drop short control-transfer checkJohan Hovold1-3/+1
There's no need to check for short control transfers when sending data so remove the redundant sanity check. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: f81232: drop short control-transfer checksJohan Hovold1-10/+2
There's no need to check for short control transfers when sending data so remove the redundant sanity checks. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: io_ti: fix a debug-message copy-paste errorJohan Hovold1-1/+1
Fix a copy-paste error in the ti_vread_sync() debug message. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: io_ti: drop short control-transfer checkJohan Hovold1-5/+1
There's no need to check for short control transfers when sending data so remove the redundant sanity check. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: upd78f0730: drop short control-transfer checkJohan Hovold1-4/+1
There's no need to check for short control transfers when sending data so remove the redundant sanity check. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: mxuport: drop short control-transfer checkJohan Hovold1-7/+0
There's no need to check for short control transfers when sending data so remove the redundant sanity check. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: cp210x: add copyright noticeJohan Hovold1-0/+1
Add a copyright notice for myself. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: cp210x: drop unused includesJohan Hovold1-3/+0
Drop include directives that are no longer used. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: cp210x: drop short control-transfer checksJohan Hovold1-12/+6
There's no need to check for short control transfers when sending data so remove the redundant sanity checks. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: cp210x: update control-characters on every changeJohan Hovold1-3/+7
Update the XON/XOFF control characters also when no other flow-control flag has changed and software flow control is enabled. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: cp210x: set IXOFF thresholdsJohan Hovold1-0/+3
At least CP2102 requires the XON/XOFF limits to be initialised in order for software input flow control (IXOFF) to work. Specifically, XOFF is never sent if the XOFF limit is left at its default value of zero. Set the limits so that input is throttled when the FIFO free level drops below 128 bytes and restarted when the FIFO fill level drops below 128 bytes. Note that the threshold values have been chosen so that they can be used also with CP2105 which has the smallest FIFO of the currently supported device types (288 byte for the SCI port). If needed the limits can be made device specific later. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: cp210x: add support for software flow controlWang Sheng Long1-2/+65
When data is transmitted between two serial ports, the phenomenon of data loss often occurs. The two kinds of flow control commonly used in serial communication are hardware flow control and software flow control. In serial communication, If you only use RX/TX/GND Pins, you can't do hardware flow. So we often used software flow control and prevent data loss. The user sets the software flow control through the application program, and the application program sets the software flow control mode for the serial port chip through the driver. For the cp210 serial port chip, its driver lacks the software flow control setting code, so the user cannot set the software flow control function through the application program. This adds the missing software flow control. Signed-off-by: Wang Sheng Long <shenglong.wang.ext@siemens.com> Link: https://lore.kernel.org/r/20210104094502.3942-1-china_shenglong@163.com [ johan: rework properly on top of recent termios changes ] Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-18USB: serial: pl2303: fix line-speed handling on newer chipsJohan Hovold1-1/+7
The latest chip family (HXN) apparently does not support setting the line speed using divisors and instead needs to use the direct encoding scheme for all rates. This specifically enables 50, 110, 134, 200 bps and other rates not supported by the original chip type. Fixes: ebd09f1cd417 ("USB: serial: pl2303: add support for PL2303HXN") Cc: stable@vger.kernel.org # 5.5 Cc: Charles Yeh <charlesyeh522@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-12USB: serial: mos7720: improve OOM-handling in read_mos_reg()Tom Rix1-1/+3
clang static analysis reports this problem mos7720.c:352:2: warning: Undefined or garbage value returned to caller return d; ^~~~~~~~ In the parport_mos7715_read_data()'s call to read_mos_reg(), 'd' is only set after the alloc block. buf = kmalloc(1, GFP_KERNEL); if (!buf) return -ENOMEM; Although the problem is reported in parport_most7715_read_data(), none of the callee's of read_mos_reg() check the return status. Make sure to clear the return-value buffer also on allocation failures. Fixes: 0d130367abf5 ("USB: serial: mos7720: fix control-message error handling") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210111220904.1035957-1-trix@redhat.com [ johan: only clear the buffer on errors, amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-10Merge tag 'scsi-fixes' of ↵Linus Torvalds5-26/+123
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is two driver fixes (megaraid_sas and hisi_sas). The megaraid one is a revert of a previous revert of a cpu hotplug fix which exposed a bug in the block layer which has been fixed in this merge window. The hisi_sas performance enhancement comes from switching to interrupt managed completion queues, which depended on the addition of devm_platform_get_irqs_affinity() which is now upstream via the irq tree in the last merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Expose HW queues for v2 hw Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""
2021-01-10Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds16-43/+143
Pull block fixes from Jens Axboe: - Missing CRC32 selections (Arnd) - Fix for a merge window regression with bdev inode init (Christoph) - bcache fixes - rnbd fixes - NVMe pull request from Christoph: - fix a race in the nvme-tcp send code (Sagi Grimberg) - fix a list corruption in an nvme-rdma error path (Israel Rukshin) - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar) - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari) - fix two compiler warnings in nvme-fcloop (James Smart) - don't call sleeping functions from irq context in nvme-fc (James Smart) - remove an unused argument (Max Gurtovoy) - remove unused exports (Minwoo Im) - Use-after-free fix for partition iteration (Ming) - Missing blk-mq debugfs flag annotation (John) - Bdev freeze regression fix (Satya) - blk-iocost NULL pointer deref fix (Tejun) * tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits) bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket bcache: check unsupported feature sets for bcache register bcache: fix typo from SUUP to SUPP in features.h bcache: set pdev_set_uuid before scond loop iteration blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED block/rnbd-clt: avoid module unload race with close confirmation block/rnbd: Adding name to the Contributors List block/rnbd-clt: Fix sg table use after free block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close block/rnbd: Select SG_POOL for RNBD_CLIENT block: pre-initialize struct block_device in bdev_alloc_inode fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb nvme: remove the unused status argument from nvme_trace_bio_complete nvmet-rdma: Fix list_del corruption on queue establishment failure nvme: unexport functions with no external caller nvme: avoid possible double fetch in handling CQE nvme-tcp: Fix possible race of io_work and direct send nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings ...
2021-01-10Merge tag 'usb-5.11-rc3' of ↵Linus Torvalds30-223/+240
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.11-rc3. Include in here are: - USB gadget driver fixes for reported issues - new usb-serial driver ids - dma from stack bugfixes - typec bugfixes - dwc3 bugfixes - xhci driver bugfixes - other small misc usb driver bugfixes All of these have been in linux-next with no reported issues" * tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: dwc3: gadget: Clear wait flag on dequeue usb: typec: Send uevent for num_altmodes update usb: typec: Fix copy paste error for NVIDIA alt-mode description usb: gadget: enable super speed plus kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb usb: uas: Add PNY USB Portable SSD to unusual_uas usb: gadget: configfs: Preserve function ordering after bind failure usb: gadget: select CONFIG_CRC32 usb: gadget: core: change the comment for usb_gadget_connect usb: gadget: configfs: Fix use-after-free issue with udc_name usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup usb: usbip: vhci_hcd: protect shift size USB: usblp: fix DMA to stack USB: serial: iuu_phoenix: fix DMA from stack USB: serial: option: add LongSung M5710 module support USB: serial: option: add Quectel EM160R-GL USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug usb: gadget: f_uac2: reset wMaxPacketSize usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one ...
2021-01-10Merge tag 'staging-5.11-rc3' of ↵Linus Torvalds4-28/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.11-rc3. Nothing major, just resolving some reported issues: - cleanup some remaining mentions of the ION drivers that were removed in 5.11-rc1 - comedi driver bugfix - two error path memory leak fixes All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ION: remove some references to CONFIG_ION staging: mt7621-dma: Fix a resource leak in an error handling path Staging: comedi: Return -EFAULT if copy_to_user() fails staging: spmi: hisi-spmi-controller: Fix some error handling paths
2021-01-10Merge tag 'char-misc-5.11-rc3' of ↵Linus Torvalds17-212/+310
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.11-rc3. The majority here are fixes for the habanalabs drivers, but also in here are: - crypto driver fix - pvpanic driver fix - updated font file - interconnect driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) Fonts: font_ter16x32: Update font with new upstream Terminus release misc: pvpanic: Check devm_ioport_map() for NULL speakup: Add github repository URL and bug tracker MAINTAINERS: Update Georgi's email address crypto: asym_tpm: correct zero out potential secrets habanalabs: Fix memleak in hl_device_reset interconnect: imx8mq: Use icc_sync_state interconnect: imx: Remove a useless test interconnect: imx: Add a missing of_node_put after of_device_is_available interconnect: qcom: fix rpmh link failures habanalabs: fix order of status check habanalabs: register to pci shutdown callback habanalabs: add validation cs counter, fix misplaced counters habanalabs/gaudi: retry loading TPC f/w on -EINTR habanalabs: adjust pci controller init to new firmware habanalabs: update comment in hl_boot_if.h habanalabs/gaudi: enhance reset message habanalabs: full FW hard reset support habanalabs/gaudi: disable CGM at HW initialization habanalabs: Revise comment to align with mirror list name ...
2021-01-09Merge tag 'hwmon-for-v5.11-rc3' of ↵Linus Torvalds2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix possible KASAN issue in amd_energy driver - Avoid configuration problem in pwm-fan driver - Fix kernel-doc warning in sbtsi_temp documentation * tag 'hwmon-for-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (amd_energy) fix allocation of hwmon_channel_info config hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values hwmon: (sbtsi_temp) Fix Documenation kernel-doc warning
2021-01-09Merge tag 'dmaengine-fix-5.11' of ↵Linus Torvalds9-22/+26
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of dmaengine driver fixes for: - coverity discovered issues for xilinx driver - qcom, gpi driver fix for undefined bhaviour and one off cleanup - update Peter's email for TI DMA drivers - one-off for idxd driver - resource leak fix for mediatek and milbeaut drivers" * tag 'dmaengine-fix-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value dmaengine: xilinx_dma: fix mixed_enum_type coverity warning dmaengine: xilinx_dma: fix incompatible param warning in _child_probe() dmaengine: xilinx_dma: check dma_async_device_register return value dmaengine: qcom: fix gpi undefined behavior dt-bindings: dma: ti: Update maintainer and author information MAINTAINERS: Add entry for Texas Instruments DMA drivers qcom: bam_dma: Delete useless kfree code dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk() dmaengine: milbeaut-xdmac: Fix a resource leak in the error handling path of the probe function dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function dmaengine: qcom: gpi: Fixes a format mismatch dmaengine: idxd: off by one in cleanup code dmaengine: ti: k3-udma: Fix pktdma rchan TPL level setup
2021-01-09Merge branch 'i2c/for-current' of ↵Linus Torvalds3-7/+30
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Three driver bugfixes for I2C. Buisness as usual" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Fix apdma and i2c hand-shake timeout i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated i2c: sprd: use a specific timeout to avoid system hang up issue
2021-01-09bcache: set bcache device into read-only mode for ↵Coly Li1-0/+15
BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature set, it means the cache device is created with obsoleted layout with obso_bucket_site_hi. Now bcache does not support this feature bit, a new BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added for a better layout to support large bucket size. For the legacy compatibility purpose, if a cache device created with obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache devices attached to this cache set should be set to read-only. Then the dirty data can be written back to backing device before re-create the cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit by the latest bcache-tools. This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit when running a cache set and attach a bcache device to the cache set. If this bit is set, - When run a cache set, print an error kernel message to indicate all following attached bcache device will be read-only. - When attach a bcache device, print an error kernel message to indicate the attached bcache device will be read-only, and ask users to update to latest bcache-tools. Such change is only for cache device whose bucket size >= 32MB, this is for the zoned SSD and almost nobody uses such large bucket size at this moment. If you don't explicit set a large bucket size for a zoned SSD, such change is totally transparent to your bcache device. Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucketColy Li3-7/+28
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET was introduced into the incompat feature set. It used bucket_size_hi (which was added at the tail of struct cache_sb_disk) to extend current 16bit bucket size to 32bit with existing bucket_size in struct cache_sb_disk. This is not a good idea, there are two obvious problems, - Bucket size is always value power of 2, if store log2(bucket size) in existing bucket_size of struct cache_sb_disk, it is unnecessary to add bucket_size_hi. - Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in struct cache_sb_disk, bucket_size_hi was added after d[] which makes csum_set calculate an unexpected super block checksum. To fix the above problems, this patch introduces a new incompat feature bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it means bucket_size in struct cache_sb_disk stores the order of power-of-2 bucket size value. When user specifies a bucket size larger than 32768 sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to incompat feature set, and bucket_size stores log2(bucket size) more than store the real bucket size value. The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore, it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only recognized by kernel driver for legacy compatible purpose. The previous bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk and not used in bcache-tools anymore. For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature, bcache-tools and kernel driver still recognize the feature string and display it as "obso_large_bucket". With this change, the unnecessary extra space extend of bcache on-disk super block can be avoided, and csum_set() may generate expected check sum as well. Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: check unsupported feature sets for bcache registerColy Li2-0/+29
This patch adds the check for features which is incompatible for current supported feature sets. Now if the bcache device created by bcache-tools has features that current kernel doesn't support, read_super() will fail with error messoage. E.g. if an unsupported incompatible feature detected, bcache register will fail with dmesg "bcache: register_bcache() error : Unsupported incompatible feature found". Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device") Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: fix typo from SUUP to SUPP in features.hColy Li1-3/+3
This patch fixes the following typos, from BCH_FEATURE_COMPAT_SUUP to BCH_FEATURE_COMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_INCOMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_RO_COMPAT_SUPP Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device") Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: set pdev_set_uuid before scond loop iterationYi Li1-1/+1
There is no need to reassign pdev_set_uuid in the second loop iteration, so move it to the place before second loop. Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08Merge tag 'devprop-5.11-rc3' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fixes from Rafael Wysocki: "Revert a problematic commit that went in during the 5.10 cycle and improve the kerneldoc description of the function affected by it (both changes from Bard Liao)" * tag 'devprop-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: add description of fwnode cases Revert "device property: Keep secondary firmware node secondary by type"
2021-01-08Merge tag 'acpi-5.11-rc3' of ↵Linus Torvalds2-19/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These address two build issues and drop confusing text from a couple of Kconfig entries. Specifics: - Drop two local variables that are never read and the code updating their values from the x86 suspend-to-idle code (Rafael Wysocki) - Add empty stub of an ACPI helper function to avoid build issues when CONFIG_ACPI is not set (Shawn Guo) - Remove confusing text regarding modules from Kconfig entries that correspond to non-modular code (Peter Robinson)" * tag 'acpi-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Update Kconfig help text for items that are no longer modular ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI ACPI: PM: s2idle: Drop unused local variables and related code
2021-01-08Merge tag 'pm-5.11-rc3' of ↵Linus Torvalds2-18/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These address two issues in the intel_pstate driver and one in the powernow-k8 cpufreq driver. Specifics: - Make the powernow-k8 cpufreq driver avoid calling cpufreq_cpu_get(), which theoretically may return NULL, to get a policy pointer that is known to it already (Colin Ian King) - Drop two functions that are not used any more from the intel_pstate driver (Lukas Bulwahn) - Make intel_pstate check the HWP capabilities to get the maximum available P-state in the passive mode to avoid using a stale value of it in case of out-of-band updates (Rafael Wysocki)" * tag 'pm-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: remove obsolete functions cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get() cpufreq: intel_pstate: Use HWP capabilities in intel_cpufreq_adjust_perf()
2021-01-08Merge tag 'drm-fixes-2021-01-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds47-177/+302
Pull drm fixes from Daniel Vetter: "Looks like people are back from the break, usual small pile of fixes all over. Next week Dave should be back. The only thing pending I'm aware of is a "this shouldn't have become uapi" reverts for amdgpu, but they're already on the list and not that important really so can wait another week. Summary: - fix for ttm list corruption in radeon, reported by a few people - fixes for amdgpu, i915, msm - dma-buf use-after free fix" * tag 'drm-fixes-2021-01-08' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/msm: Only enable A6xx LLCC code on A6xx drm/msm: Add modparam to allow vram carveout drm/msm: Call msm_init_vram before binding the gpu drm/msm/dp: postpone irq_hpd event during connection pending state drm/ttm: unexport ttm_pool_init/fini drm/radeon: stop re-init the TTM page pool dmabuf: fix use-after-free of dmabuf's file->f_inode Revert "drm/amd/display: Fix memory leaks in S3 resume" drm/amdgpu/display: drop DCN support for aarch64 drm/amdgpu: enable ras eeprom support for sienna cichlid drm/amdgpu: fix no bad_pages issue after umc ue injection drm/amdgpu: fix potential memory leak during navi12 deinitialization drm/amd/display: Fix unused variable warning drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCO drm/amd/pm: fix the failure when change power profile for renoir drm/amdgpu: fix a GPU hang issue when remove device drm/amdgpu: fix a memory protection fault when remove amdgpu device drm/amdgpu: switched to cached noretry setting for vangogh drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issue drm/amd/pm: updated PM to I2C controller port on sienna cichlid ...
2021-01-08Merge tag 'iommu-fixes' of ↵Linus Torvalds9-85/+135
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull iommu fixes from Will Deacon: "This is mainly all Intel VT-D stuff, but there are some fixes for AMD and ARM as well. We've also got the revert I promised during the merge window, which removes a temporary hack to accomodate i915 while we transitioned the Intel IOMMU driver over to the common DMA-IOMMU API. Finally, there are still a couple of other VT-D fixes floating around, so I expect to send you another batch of fixes next week. Summary: - Fix VT-D TLB invalidation for subdevices - Fix VT-D use-after-free on subdevice detach - Fix VT-D locking so that IRQs are disabled during SVA bind/unbind - Fix VT-D address alignment when flushing IOTLB - Fix memory leak in VT-D IRQ remapping failure path - Revert temporary i915 sglist hack now that it is no longer required - Fix sporadic boot failure with Arm SMMU on Qualcomm SM8150 - Fix NULL dereference in AMD IRQ remapping code with remapping disabled - Fix accidental enabling of irqs on AMD resume-from-suspend path - Fix some typos in comments" * tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: iommu/vt-d: Fix ineffective devTLB invalidation for subdevices iommu/vt-d: Fix general protection fault in aux_detach_device() iommu/vt-d: Move intel_iommu info from struct intel_svm to struct intel_svm_dev iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context iommu/vt-d: Fix lockdep splat in sva bind()/unbind() Revert "iommu: Add quirk for Intel graphic devices in map_sg" iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb() iommu/amd: Stop irq_remapping_select() matching when remapping is disabled iommu/amd: Set iommu->int_enabled consistently when interrupts are set up iommu/intel: Fix memleak in intel_irq_remapping_alloc iommu/iova: fix 'domain' typos
2021-01-08Merge tag 'net-5.11-rc3-2' of ↵Linus Torvalds43-244/+345
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull more networking fixes from Jakub Kicinski: "Slightly lighter pull request to get back into the Thursday cadence. Current release - always broken: - can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions - dsa: hellcreek: fix led_classdev build errors Previous releases - regressions: - ipv6: fib: flush exceptions when purging route to avoid netdev reference leak - ip_tunnels: fix pmtu check in nopmtudisc mode - ip: always refragment ip defragmented packets to avoid MTU issues when forwarding through tunnels, correct "packet too big" message is prohibitively tricky to generate - s390/qeth: fix locking for discipline setup / removal and during recovery to prevent both deadlocks and races - mlx5: Use port_num 1 instead of 0 when delete a RoCE address Previous releases - always broken: - cdc_ncm: correct overhead calculation in delayed_ndp_size to prevent out of bound accesses with Huawei 909s-120 LTE module - fix stmmac dwmac-sun8i suspend/resume: - PHY being left powered off - MAC syscon configuration being reset - reference to the reset controller being improperly dropped - qrtr: fix null-ptr-deref in qrtr_ns_remove - can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver - mlx5e: CT: Use per flow counter when CT flow accounting is enabled - mlx5e: Fix SWP offsets when vlan inserted by driver Misc: - bpf: Fix a task_iter bug caused by a bpf -> net merge conflict resolution And the usual many fixes to various error paths" * tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE s390/qeth: fix L2 header access in qeth_l3_osa_features_check() s390/qeth: fix locking for discipline setup / removal s390/qeth: fix deadlock during recovery selftests: fib_nexthops: Fix wrong mausezahn invocation nexthop: Bounce NHA_GATEWAY in FDB nexthop groups nexthop: Unlink nexthop group entry in error path nexthop: Fix off-by-one error in error path octeontx2-af: fix memory leak of lmac and lmac->name chtls: Fix chtls resources release sequence chtls: Added a check to avoid NULL pointer dereference chtls: Replace skb_dequeue with skb_peek chtls: Avoid unnecessary freeing of oreq pointer chtls: Fix panic when route to peer not configured chtls: Remove invalid set_tcb call chtls: Fix hardware tid leak net: ip: always refragment ip defragmented packets net: fix pmtu check in nopmtudisc mode selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking docs: octeontx2: tune rst markup ...
2021-01-08Revert "init/console: Use ttynull as a fallback when there is no console"Petr Mladek3-19/+16
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06aeef7ece30f6 ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/ Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-08Merge branches 'acpi-scan' and 'acpi-misc'Rafael J. Wysocki1-6/+0
* acpi-scan: ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI * acpi-misc: ACPI: Update Kconfig help text for items that are no longer modular
2021-01-08hwmon: (amd_energy) fix allocation of hwmon_channel_info configDavid Arcari1-1/+2
hwmon, specifically hwmon_num_channel_attrs, expects the config array in the hwmon_channel_info structure to be terminated by a zero entry. amd_energy does not honor this convention. As result, a KASAN warning is possible. Fix this by adding an additional entry and setting it to zero. Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Signed-off-by: David Arcari <darcari@redhat.com> Cc: Naveen Krishna Chatradhi <nchatrad@amd.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: David Arcari <darcari@redhat.com> Acked-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20210107144707.6927-1-darcari@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Powered by cgit, Gruvboxed by Blaster4385.