aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-11-30drm/amdgpu: Fix missing mca debugfs nodeYang Wang1-1/+1
Use amdgpu_ip_version() helper function to check ip version. The ip version contains other information, use the helper function to avoid reading wrong value. Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-30drm/amdgpu: Skip access gfx11 golden registers under SRIOVZhenGuo Yin1-0/+3
[Why] Golden registers are PF-only registers on gfx11. RLCG interface will return "out-of-range" under SRIOV VF. [How] Skip access gfx11 golden registers under SRIOV. Reviewed-by: Horace Chen <[email protected]> Signed-off-by: ZhenGuo Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: Use another offset for GC 9.4.3 remapLijo Lazar1-0/+5
The legacy region at 0x7F000 maps to valid registers in GC 9.4.3 SOCs. Use 0x1A000 offset instead as MMIO register remap region. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: Read aquavanjaram XGMI register stateLijo Lazar1-0/+96
Add support to read state of XGMI links in aquavanjaram SOC. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: Read aquavanjaram PCIE register stateLijo Lazar3-0/+120
Add support to read aqua vanjaram PCIE register state Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: Add reg_state sysfs attributeLijo Lazar2-0/+75
Add reg_state attribute to fetch the register snapshot of different IPs like XGMI, WAFL,PCIE and USR. To get a snapshot for a particular IP 1) Open the sysfs file 2) Seek to the offset as defined in amdgpu_sysfs_reg_offset 3) Read Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: add amdgpu_reg_state.hAlex Deucher2-0/+145
This header defines the reg state structures exposed via sysfs for umr debugging. v2: add content type Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]>
2023-11-29drm/amd/display: Promote DAL to 3.2.262Aric Cyr1-1/+1
This version brings along following fixes: - Add DSC granular throughput adjustment - Allow DTBCLK disable for DCN35 - Update Fixed VS/PE Retimer Sequence - Block dcn315 dynamic crb allocation when unintended - Update dcn315 lpddr pstate latency - Fix some HostVM parameters in DML Reviewed-by: Tom Chung <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Fix some HostVM parameters in DMLTaimur Hassan2-3/+39
[Why] A number of DML parameters related to HostVM were either missing or being set incorrectly, which may cause inaccuracies in calculating margins and determining BW limitations. [How] Correct these values where needed and populate the missing values. Cc: [email protected] Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Add DSC granular throughput adjustmentIlya Bakoulin1-2/+8
[Why/How] Update DSC DPCD parsing to take granular throughput adjustment into consideration. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Ilya Bakoulin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdkfd: Free gang_ctx_bo and wptr_bo in pqm_uninitZhenGuo Yin1-21/+33
[Why] Memory leaks of gang_ctx_bo and wptr_bo. [How] Free gang_ctx_bo and wptr_bo in pqm_uninit. v2: add a common function pqm_clean_queue_resource to free queue's resources. v3: reset pdd->pqd.num_gws when destorying GWS queue. Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: ZhenGuo Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: Update EEPROM I2C address for smu v13_0_0Candice Li1-0/+6
Check smu v13_0_0 SKU type to select EEPROM I2C address. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Allow DTBCLK disable for DCN35Nicholas Kazlauskas1-15/+12
[Why] DTBCLK is enabled on idle and it will burn power. [How] There's a few issues here: - Always enabling DTBCLK on clock manager init - Setting refclk when DTBCLK is supposed to be disabled - Not applying the correct calculated version refclk, but instead the base value which might be zero On dtbclk_en change we'll message PMFW to enable or disable the clock accordingly. The DTBDTO will be then based on refclk, but it will be set to the default fixed value if there was nothing calculated in DML despite the clock being considered enabled. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: [FW Promotion] Release 0.0.194.0Anthony Koo1-0/+4
- Add a new dmub command in enum dmub_cmd_cab_type Reviewed-by: Tom Chung <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdkfd: Run restore_workers on freezable WQsFelix Kuehling3-55/+104
Make restore workers freezable so we don't have to explicitly flush them in suspend and GPU reset code paths, and we don't accidentally try to restore BOs while the GPU is suspended. Not having to flush restore_work also helps avoid lock/fence dependencies in the GPU reset case where we're not allowed to wait for fences. A side effect of this is, that we can now have multiple concurrent threads trying to signal the same eviction fence. Rework eviction fence signaling and replacement to account for that. The GPU reset path can no longer rely on restore_process_worker to resume queues because evict/restore workers can run independently of it. Instead call a new restore_process_helper directly. This is an RFC and request for testing. v2: - Reworked eviction fence signaling - Introduced restore_process_helper v3: - Handle unsignaled eviction fences in restore_process_bos Signed-off-by: Felix Kuehling <[email protected]> Acked-by: Christian König <[email protected]> Tested-by: Emily Deng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Update Fixed VS/PE Retimer SequenceMichael Strauss1-0/+10
[WHY/HOW] Add a new AUX sequence provided by vendor to improve interop with specific display configurations. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: block dcn315 dynamic crb allocation when unintendedDmytro Laktyushkin1-2/+4
[WHY/HOW] Limit the dynamic crb to dual stream configs that include eDP Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd: Enable PCIe PME from D3Mario Limonciello1-0/+2
When dGPU is put into BOCO it may be in D3cold but still able send PME on display hotplug event. For this to work it must be enabled as wake source from D3. When runpm is enabled use pci_wake_from_d3() to mark wakeup as enabled by default. Cc: [email protected] # 6.1+ Signed-off-by: Mario Limonciello <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointerLu Yao1-0/+6
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init 'didt_rreg' and 'didt_wreg' to 'NULL'. But in func 'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT' lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use these two definitions won't be added for 'AMDGPU_FAMILY_SI'. So, add null pointer judgment before calling. Reviewed-by: Christian König <[email protected]> Signed-off-by: Lu Yao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/pm: fix a memleak in aldebaran_tables_initDinghao Liu1-1/+4
When kzalloc() for smu_table->ecc_table fails, we should free the previously allocated resources to prevent memleak. Fixes: edd794208555 ("drm/amd/pm: add message smu to get ecc_table v2") Signed-off-by: Dinghao Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: fix AGP addressing when GART is not at 0Alex Deucher3-6/+11
This worked by luck if the GART aperture ended up at 0. When we ended up moving GART on some chips, the GART aperture ended up offsetting the AGP address since the resource->start is a GART offset, not an MC address. Fix this by moving the AGP address setup into amdgpu_bo_gpu_offset_no_check(). v2: check mem_type before checking agp v3: check if the ttm bo has a ttm_tt allocated yet Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Tested-by: Mario Limonciello <[email protected]> Reported-by: Jesse Zhang <[email protected]> Reported-by: Yifan Zhang <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Cc: [email protected]
2023-11-29drm/amd/display: remove unnecessary braces to fix coding styleRutingZhang1-2/+1
checkpatch complains that: WARNING: braces {} are not necessary for single statement blocks + if (pool->base.irqs != NULL) { + dal_irq_service_destroy(&pool->base.irqs); + } Fixed it by removing unnecessary braces to fix the coding style issue. Signed-off-by: RutingZhang <[email protected]> Reviewed-by: Dongliang Mu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: update dcn315 lpddr pstate latencyDmytro Laktyushkin1-4/+4
[WHY/HOW] Increase the pstate latency to improve ac/dc transition Reviewed-by: Charlene Liu <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: fix ABM disablementHamza Mahfooz1-3/+5
On recent versions of DMUB firmware, if we want to completely disable ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM level to DMUB. Otherwise, LCD eDP displays are unable to reach their maximum brightness levels. So, to fix this whenever the user requests an ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also, to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE to 0 when a user tries to read the requested ABM level. Cc: [email protected] # 6.1+ Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: Move mca debug mode decision to rasLijo Lazar4-17/+13
Refactor code such that ras block decides the default mca debug mode, and not swsmu block. By default mca debug mode is set to false. v2: squash in uninitialized value fix (Alex) Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: 3.2.261Aric Cyr1-1/+1
This version brings along the following: - DCN314 fixes - DCN32 fixes - DCN35 fixes - DML2 fixes - eDP fixes - HDR fixes - MST fixes - Replay fixes - SubVP support for more configs Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: [FW Promotion] Release 0.0.193.0Anthony Koo1-2/+8
- Add a tracing framework, to measure duration, execution count and longest duration of main loop/vsync interrupt work GPINT command is used to start/stop the measurements. Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Fix black screen on video playback with embedded panelSung Joon Kim2-1/+10
[why] We have dynamic power control in driver but should be ignored when power is forced on. [how] Bypass any power control when it's forced on. Cc: [email protected] Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Sung Joon Kim <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Fix conversions between bytes and KBTaimur Hassan2-10/+10
[Why] There are a number of instances where we convert HostVMMinPageSize or GPUVMMinPageSize from bytes to KB by dividing (rather than multiplying) and vice versa. Additionally, in some cases, a parameter is passed through DML in KB but later checked as if it were in bytes. Cc: [email protected] Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdkfd: Use common function for IP version checkMukul Joshi1-1/+1
KFD_GC_VERSION was recently updated to use a new function for IP version checks. As a result, use KFD_GC_VERSION as the common function for all IP version checks in KFD. Signed-off-by: Mukul Joshi <[email protected]> Reviewed-by: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Remove config updateTaimur Hassan1-1/+1
[Why] Prevent overwrite of dc->config.use_default_clock_table, as it should be pre-configured. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Update DCN35 clock table policyNicholas Kazlauskas1-26/+51
[Why] The new table doesn't have an implicit mapping between Fclk SOC voltage and MemClk and it currently builds the table off of number of Fclk states rather than DcfClock states. The DML table in use is not correct for functionality or power and does not align with our existing policies for DCN3x. [How] Build the table based on DcfClock with the following assumptions: 1. Raising Soc voltage is the most expensive operation, so assume that running at max DispClock or DppClock is preferable. 2. Assume that we can run at max Fclk / MemClk at any state, but restrict the maximum state to the very last entry in the table as the worst case scenario. 3. Assume that Fclk always has a 2x multiplier on DcfClock unless the table specifies something lower. Reviewed-by: Taimur Hassan <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Refactor OPTC into component folderParandhaman K31-15/+122
[why] Move all optc files to unique folder optc. [how] creating optc repo in dc, and moved the dcnxx_optc.c and .h files into corresponding new folders inside the optc and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Parandhaman K <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: force toggle rate wa for first link training for a retimerZhongwei1-3/+3
[WHY] Handover from DMUB to driver does not perform link rate toggle. It might cause link training failure for boot up. [HOW] Force toggle rate wa for first link train. link->vendor_specific_lttpr_link_rate_wa should be zero then. Cc: [email protected] # 6.1+ Reviewed-by: Michael Strauss <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Zhongwei <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: If P-State is supported try SubVP for smaller vlevelAlvin Lee1-1/+7
[Description] - To reduce vlevel further, we can try to apply subvp on configs that already support p-state since the natural p-state support may not allow for DPM0. - Add code to try subvp to reduce UCLK DPM level further if already supported, but don't use subvp if it does not optimize the DPM level even lower Reviewed-by: Samson Tam <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: correct the amdgpu runtime dereference usage countPrike Liang1-6/+3
Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29Revert "drm/amd/display: Enable CM low mem power optimization"Gabe Teeger2-9/+6
This reverts commit fcfc6ceec3ebb725a0d6381a1120e7cd546e1df4. [why] Flickering observed. Regression search pointed to this being the offending commit. Reviewed-by: Charlene Liu <[email protected]> Reviewed-by: Yihan Zhu <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Gabe Teeger <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Update min Z8 residency time to 2100 for DCN314Nicholas Kazlauskas1-1/+1
[Why] Some panels with residency period of 2054 exhibit flickering with Z8 at the end of the frame. [How] As a workaround, increase the limit to block these panels. Cc: [email protected] # 6.1+ Reviewed-by: Syed Hassan <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Remove min_dst_y_next_start check for Z8Nicholas Kazlauskas1-14/+1
[Why] Flickering occurs on DRR supported panels when engaged in DRR due to min_dst_y_next becoming larger than the frame size itself. [How] In general, we should be able to enter Z8 when this is engaged but it might be a net power loss even if the calculation wasn't bugged. Don't support enabling Z8 during the DRR region. Cc: [email protected] # 6.1+ Reviewed-by: Syed Hassan <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Fix tiled display misalignmentMeenakshikumar Somasundaram1-0/+4
[Why] When otg workaround is applied during clock update, otgs of tiled display went out of sync. [How] To call dc_trigger_sync() after clock update to sync otgs again. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Meenakshikumar Somasundaram <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: fix memory overflow in the IB testTim Huang4-7/+7
Fix a memory overflow issue in the gfx IB test for some ASICs. At least 20 bytes are needed for the IB test packet. v2: correct code indentation errors. (Christian) Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amdgpu: add init_registers for nbio v7.11Li Ma3-9/+40
enable init_registers callback func for nbio v7.11. Signed-off-by: Li Ma <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Enable SubVP on 1080p60 displaysAlvin Lee4-20/+65
[Description] - Previously SubVP would never be selected on 1080p60 displays because it has too much vactive margin. However, implement a change to allow it like how 1440p60 is allowed. - Add a new struct such that we have a list of allowed modes for enabling subvp with vactive margin (currently 1080p60 and 1440p60) - Also ensure to block drr + vblank cases to prevent unexpected enablement of new display configs - Update SW cursor fallback for these new potential cases as well Reviewed-by: Samson Tam <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Disable Timing sync check in Full-Screen Video CaseDennis Chan2-24/+51
[why] If Panel max link off frame count is low, it will cause low residency for Replay, then Disabled timing sync check in Full screen Video Case. Reviewed-by: Robin Chen <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Dennis Chan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: adjust flow for deallocation mst payloadWayne Lin5-138/+50
[Why] MST relevant variables are maintained at drm side. As the result, we still have to call drm_dp_remove_payload_part2() to update the relevant values regardless the link is under mst mode or not. We used to have a workaround patch to tackle this: commit 3d8fcc6740c9 ("drm/amd/display: Extract temp drm mst deallocation wa into its own function") Now it's time to remove the workaround and adjust the flow. [How] During deallocate_mst_payload(), source actually doesn't send out ALLOCATE_PAYLOAD at the end as like the flow in allocate_mst_payload(). Call function dm_helpers_dp_mst_send_payload_allocation() at the end of deallocate_mst_payload() is a bit confusing. Separate dm_helpers_dp_mst_send_payload_allocation() into 2 functions. Have a new function dm_helpers_dp_mst_update_mst_mgr_for_deallocation() to replace dm_helpers_dp_mst_send_payload_allocation() for payload deallocation. Cc: Ville Syrjälä <[email protected]> Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Simplify brightness initializationCamille Cho6-22/+5
[Why] Remove the brightness cache in DC. It uses a single value to represent the brightness for both SDR and HDR mode. This leads to flash in HDR on/off. It also unconditionally programs brightness as in HDR mode. This may introduce garbage on SDR mode in miniLED panel. [How] Simplify the initialization flow by removing the DC cache and taking what panel has as default. Expand the mechanism for PWM to DPCD Aux to restore cached brightness value generally. Cc: [email protected] # 6.1+ Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Camille Cho <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: replay: Augment Frameupdate CommandMax Tseng4-3/+61
[Why] Sending certain Frameupdate number for Replay Power Evaluation Reviewed-by: Dennis Chan <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Max Tseng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Increase num voltage states to 40Alvin Lee1-1/+1
[Description] If during driver init stage there are greater than 20 intermediary voltage states while constructing the SOC BB we could hit issues because we will index outside of the clock_limits array and start overwriting data. Increase the total number of states to 40 to avoid this issue. Cc: [email protected] # 6.1+ Reviewed-by: Samson Tam <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: Do not read DPREFCLK spread info from LUT on DCN35Michael Strauss1-22/+0
[WHY] Currently DCN35 does not spread DPREFCLK [HOW] Remove hardcoded table with nonzero caps Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-29drm/amd/display: replay: generalize the send command function usageMax Tseng6-6/+16
Augment the function to allow send different format data in different use case. Reviewed-by: Dennis Chan <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Max Tseng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.