aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-10-01[media] s5p-jpeg: Add missing braces around sizeofSachin Kamat1-1/+1
Silences the following warning: WARNING: sizeof *ctx should be sizeof(*ctx) Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01vxlan: virtual extensible lanstephen hemminger3-0/+1231
This is an implementation of Virtual eXtensible Local Area Network as described in draft RFC: http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-02 The driver integrates a Virtual Tunnel Endpoint (VTEP) functionality that learns MAC to IP address mapping. This implementation has not been tested only against the Linux userspace implementation using TAP, not against other vendor's equipment. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01netlink: add attributes to fdb interfacestephen hemminger2-2/+2
Later changes need to be able to refer to neighbour attributes when doing fdb_add. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01drm/radeon: fix radeon power state debug outputAlex Deucher1-11/+9
Driver used to print "default" as the state type regardless of whether it is the default state. Signed-off-by: Alex Deucher <[email protected]>
2012-10-01[media] s5p-fimc: fimc-lite: Propagate frame format on the subdevSylwester Nawrocki1-2/+5
When setting image format on subdev's sink pad there was no propagation to the source pad. This resulted in wrong reported format on the source pad and wrong device configuration when used from subdev interace level only. Correct this by propagating format from the sink to the source pad. Signed-off-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] s5p-fimc: fimc-lite: Correct Bayer pixel format definitionsSylwester Nawrocki1-3/+3
Replace erroneous V4L2_PIX_FMT_* entries with their V4L2_MBUS_FMT_* counterparts. This enables use of raw Bayer formats on FIMC-LITE.? subdevs. Signed-off-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01rbd: BUG on invalid layoutSage Weil1-2/+3
This shouldn't actually be possible because the layout struct is constructed from the RBD header and validated then. [[email protected]: converted BUG() call to equivalent rbd_assert()] Signed-off-by: Sage Weil <[email protected]> Reviewed-by: Alex Elder <[email protected]>
2012-10-01tg3: unconditionally select HWMON support when tg3 is enabled.Paul Gortmaker2-9/+1
There is the seldom used corner case where HWMON=m at the same time as TIGON3=y (typically randconfigs) which will cause a link fail like: drivers/built-in.o: In function `tg3_close': tg3.c:(.text+0x16bd86): undefined reference to `hwmon_device_unregister' drivers/built-in.o: In function `tg3_hwmon_open': tg3.c:(.text+0x16fc4b): undefined reference to `hwmon_device_register' make[1]: *** [vmlinux] Error 1 Fix it as suggested by DaveM[1] by having the Kconfig logic simply select HWMON when TIGON3 is selected. This gets rid of all the extra IS_ENABLED ifdeffery in tg3.c as a side benefit. [1] http://marc.info/?l=linux-netdev&m=134250573718151&w=2 Cc: Michael Chan <[email protected]> Reported-by: Benjamin Herrenschmidt <[email protected]> Reported-by: Anisse Astier <[email protected]> Suggested-by: David S. Miller <[email protected]> Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"David S. Miller1-3/+0
This reverts commit d7559982701ac500662b2e8e150ff34f7faf0281. It wasn't meant to be applied, commit 342b7b741d76bc8aadeff844634348bb2a343d19 ("net: ti cpsw ethernet: set IFCTL_A bit in MACCONTROL") was redone in such a way to make this commit unnecessary. Signed-off-by: David S. Miller <[email protected]>
2012-10-01asix: Adds support for Lenovo 10/100 USB dongle.Quinlan Pfiffer1-0/+4
This dongle ships with the X1 Carbon, and has an AX88772B usb to ethernet chip in it. Signed-off-by: Quinlan Pfiffer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01Merge branch 'next' into for-linusDmitry Torokhov17-266/+497
Prepare first set of updates for 3.7 merge window.
2012-10-01flexcan: disable bus error interrupts for the i.MX28Wolfgang Grandegger1-10/+19
Due to a bug in most Flexcan cores, the bus error interrupt needs to be enabled. Otherwise we don't get any error warning or passive interrupts. This is _not_ necessary for the i.MX28 and this patch disables bus error interrupts if "berr-reporting" is not requested. This avoids bus error flooding, which might harm, especially on low-end systems. To handle such quirks of the Flexcan cores, a hardware feature flag has been introduced, also replacing the "hw_ver" variable. So far nobody could tell what Flexcan core version is available on what Freescale SOC, apart from the i.MX6Q and P1010, and which bugs or features are present on the various "hw_rev". CC: Hui Wang <[email protected]> CC: Shawn Guo <[email protected]> Signed-off-by: Wolfgang Grandegger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01IB/ipoib: Add more rtnl_link_ops callbacksOr Gerlitz5-26/+111
Add the rtnl_link_ops changelink and fill_info callbacks, through which the admin can now set/get the driver mode, etc policies. Maintain the proprietary sysfs entries only for legacy childs. For child devices, set dev->iflink to point to the parent device ifindex, such that user space tools can now correctly show the uplink relation as done for vlan, macvlan, etc devices. Pointed out by Patrick McHardy <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01net: ti cpsw ethernet: allow reading phy interface mode from DTDaniel Mack1-0/+3
Allow users to specify the phy interface of the CPSW slaves. The new node parameter is called "phy_if_mode" and is optional. The original behaviour of the driver is preserved when not given. Signed-off-by: Daniel Mack <[email protected]> Cc: Mugunthan V N <[email protected]> Cc: Vaibhav Hiremath <[email protected]> Cc: David S. Miller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01net: ti cpsw ethernet: set IFCTL_A bit in MACCONTROLDaniel Mack1-0/+5
For RMII/RGMII mode operation in 100Mbps, the CPSW needs to set the IFCTL_A bits in the MACCONTROL register. For all other PHY modes, this bit is unused, so setting it unconditionally shouldn't cause any trouble. Signed-off-by: Daniel Mack <[email protected]> Cc: Mugunthan V N <[email protected]> Cc: Vaibhav Hiremath <[email protected]> Cc: David S. Miller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01mlx4: dont orphan skbs in mlx4_en_xmit()Eric Dumazet1-4/+0
After commit e22979d96a55d (mlx4_en: Moving to Interrupts for TX completions) we no longer need to orphan skbs in mlx4_en_xmit() since skb wont stay a long time in TX ring before their release. Orphaning skbs in ndo_start_xmit() should be avoided as much as possible, since it breaks TCP Small Queue or other flow control mechanisms (per socket limits) Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Yevgeny Petrilin <[email protected]> Cc: Or Gerlitz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01Merge tag 'hwmon-for-linus' of ↵Linus Torvalds52-859/+1353
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers for: MCP3221, ADT7410, MAX197 Chip support added to existing drivers: LM71, LM74, MAX1110, MAX1112, MAX1113, INA220, INA230, MCP3221 Cleanup: Use devm_ functions, fixed build warnings, removed deprecated sysfs attributes, code simplifications, dropped dependencies on EXPERIMENTAL" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits) hwmon: (mcp3021) Add MCP3221 support hwmon: (mcp3021) Prepare MCP3021 driver to support other chips hwmon: (w83791d) Drop unnecessary compare statements hwmon: (lm93) Drop unnecessary compare statement hwmon: (lm70) Simplify show_name function hwmon: (adcxx) Simplify show_name function hwmon: Drop dependencies on EXPERIMENTAL hwmon: (it87) Fix Kconfig for IT87 driver hwmon: (sht15) move header to linux/platform_data/ hwmon: (asus_atk0110) Remove useless kfree hwmon: (ina2xx) Add support for INA220 and INA230 hwmon: (ina2xx) Use structure array to distinguish chip types hwmon: (max1111) Add support for MAX1110, MAX1112, and MAX1113 hwmon: (lm70) Add support for LM71 and LM74 hwmon: (Documentation) Update feature-removal-schedule.txt hwmon: (w83793) Remove legacy chassis intrusion detection sysfs attributes hwmon: (w83792d) Remove legacy chassis intrusion detection attributes hwmon: (adm9240) Remove legacy chassis intrusion detection sysfs attribute hwmon: (lm70) Allow 4wire SPI bus with LM70 hwmon: (sht15) remove multiple driver registration ...
2012-10-01bnx2x: update version to 1.78.00-0.Yuval Mintz1-2/+2
Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01bnx2x,cnic: use FW 7.8.2Yuval Mintz11-563/+79
This patch moves the bnx2x and cnic drivers into using FW 7.8.2 which was recently submitted into the linux-firmware tree. A short summary of minor bugs fixed by this FW: 1. In switch dependent mode, fix several issues regarding inner vlan vs. DCB priorities. 2. iSCSI - not all packets were completed on a forward channel. 3. DCB - fixed for 4-port devices. 4. Fixed false parity reported in CAM memories when operating near -5% on the 1.0V core supply. 5. ETS default settings are set to fairness between traffic classes (rather than strict priority), and uses the same chip receive buffer configuration for both PFC and pause. For a complete list of fixes made by this FW, see commit 236367db in the linux-firmware git repository. Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Dmitry Kravkov <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01be2net: fix vfs enumerationIvan Vecera1-4/+2
Current VFs enumeration algorithm used in be_find_vfs does not take domain number into the match. The match found in igb/ixgbe is more elegant and safe. This 2nd version uses pci_physfn instead of checking dev->physfn directly. Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-01[media] tda18271: make 'low-power standby mode after attach' multi-instance safeMichael Krufky1-3/+4
Ensure that unnecessary features are powered down at the end of the attach() function on attach of the tuner's first instance. If the configuration requires the loop thru or xtout features, they will remain enabled. This must *only* be done after attaching the first instance of the tuner. If there are multiple instances of the tuner, the bridge driver will need to maintain power managament by itself. Signed-off-by: Michael Krufky <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] tda18271: enter low-power standby mode at the end of tda18271_attach()Michael Krufky1-0/+3
Ensure that unnecessary features are powered down at the end of the attach() function. If the configuration requires the loop thru or xtout features, they will remain enabled. Thanks to Antti Palosaari for noticing the additional power consumption. Signed-off-by: Michael Krufky <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] ivtv: fix format enumeration: don't show invalid formatsHans Verkuil1-33/+35
Depending on the device node only the compressed or the uncompressed format should be shown, not both. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] ivtv: disable a bunch of ioctls that are invalid for the decoder VBIHans Verkuil1-0/+13
The VBI capture for the decoder (/dev/vbi8) is special in that it captures the VBI stream embedded in an MPEG stream that is being decoded. A lot of the ioctls that would normally be valid have to be disabled since they make no sense for such a device, and v4l2-compliance will complain about that. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds283-8445/+25557
Pull USB changes from Greg Kroah-Hartman: "Here is the big USB pull request for 3.7-rc1 There are lots of gadget driver changes (including copying a bunch of files into the drivers/staging/ccg/ directory so that the other gadget drivers can be fixed up properly without breaking that driver), and we remove the old obsolete ub.c driver from the tree. There are also the usual XHCI set of updates, and other various driver changes and updates. We also are trying hard to remove the old dbg() macro, but the final bits of that removal will be coming in through the networking tree before we can delete it for good. All of these patches have been in the linux-next tree. Signed-off-by: Greg Kroah-Hartman <[email protected]>" Fix up several annoying - but fairly mindless - conflicts due to the termios structure having moved into the tty device, and often clashing with dbg -> dev_dbg conversion. * tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits) USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc USB: uas: fix gcc warning USB: uas: fix locking USB: Fix race condition when removing host controllers USB: uas: add locking USB: uas: fix abort USB: uas: remove aborted field, replace with status bit. USB: uas: fix task management USB: uas: keep track of command urbs xhci: Intel Panther Point BEI quirk. powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Revert "usb : Add sysfs files to control port power." USB: serial: remove vizzini driver usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems Increase XHCI suspend timeout to 16ms USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq USB: sierra_ms: don't keep unused variable fsl/usb: Add support for USB controller version 2.4 USB: qcaux: add Pantech vendor class match ...
2012-10-01[media] ivtv: fix incorrect service_set for the decoder VBI captureHans Verkuil1-0/+1
Found with v4l2-compliance. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] ivtv: don't allow g/s_frequency for output device nodesHans Verkuil2-0/+7
Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] ivtv: fix v4l2-compliance errors for the radio deviceHans Verkuil2-3/+12
- fix error code when attempting to read from write-only streams. - fix error code when attempting to write to read-only streams. - don't start capturing when polling on a radio node. - give the radio node its own file operations struct. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] ivtv: fix v4l2-compliance error: inconsistent std reportingHans Verkuil1-0/+9
The tuner input has a different standard mask than a S-Video or Composite input. Changing the standard should change tvnorms as well for all device nodes. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] ivtv: DECODER_CMD v4l2-compliance fixesHans Verkuil1-0/+7
VIDIOC_DECODER_CMD didn't return EPERM when calling PAUSE or RESUME if no decoding is in progress. VIDIOC_G_ENC_INDEX didn't set entries_cap or return 0 if no decoding was in progress. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] sliced vbi: subdevs shouldn't clear the full v4l2_sliced_vbi_format ↵Hans Verkuil7-9/+10
struct Various subdevs cleared the full v4l2_sliced_vbi_format struct, when only the service_set/lines fields should have been cleared. Due to this the io_size field was wrongly cleared to 0, causing a v4l2-compliance error. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] v4l2-ctrls: add a filter function to v4l2_ctrl_add_handlerHans Verkuil6-6/+29
With a filter function you can control more precisely which controls are added. This is useful in particular for radio device nodes for combined TV/Radio cards where you want to show just the radio-specific controls and not controls like brightness. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] rtl28xxu: [0ccd:00d3] TerraTec Cinergy T Stick RC (Rev. 3)Antti Palosaari1-0/+2
It is RTL2832U + E4000. Thanks to Nikolai Spasov reporting and testing! Reported-by: Nikolai Spasov <[email protected]> Tested-by: Nikolai Spasov <[email protected]> Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] fc2580: use macro for 64 bit division and reminderGianluca Gennari1-2/+1
Fixes the following warnings on a 32 bit system with GCC 4.4.3 and kernel Ubuntu 2.6.32-43 32 bit: WARNING: "__udivdi3" [fc2580.ko] undefined! WARNING: "__umoddi3" [fc2580.ko] undefined! Signed-off-by: Gianluca Gennari <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] fc2580: silence uninitialized variable warningGianluca Gennari1-1/+1
fc2580.c: In function 'fc2580_set_params': fc2580.c:118: warning: 'ret' may be used uninitialized in this function Signed-off-by: Gianluca Gennari <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] fc2580: define const as UL to silence a warningGianluca Gennari1-1/+1
fc2580.c: In function 'fc2580_set_params': fc2580.c:150: warning: this decimal constant is unsigned only in ISO C90 Signed-off-by: Gianluca Gennari <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] em28xx: do not set PCTV 290e LNA handler if fe attach failAntti Palosaari1-11/+13
It was a bug that could cause oops if demodulator attach was failed. Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] cxd2820r: use static GPIO config when GPIOLIB is undefinedAntti Palosaari2-9/+23
It is fallback condition as GPIOLIB seems to be disabled by default. Better solution is needed, maybe GPIOLIB could be enabled by default? Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01[media] em28xx: implement FE set_lna() callbackAntti Palosaari1-5/+36
Make LNA run-time switching possible for PCTV nanoStick T2 290e! Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2012-10-01rbd: update remaining header fields for v2Alex Elder1-4/+12
There are three fields that are not yet updated for format 2 rbd image headers: the version of the header object; the encryption type; and the compression type. There is no interface defined for fetching the latter two, so just initialize them explicitly to 0 for now. Change rbd_dev_v2_snap_context() so the caller can be supplied the version for the header object. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: get snapshot name for a v2 imageAlex Elder1-2/+79
Define rbd_dev_v2_snap_name() to fetch the name for a particular snapshot in a format 2 rbd image. Define rbd_dev_v2_snap_info() to to be a wrapper for getting the name, size, and features for a particular snapshot, using an interface that matches the equivalent function for version 1 images. Define rbd_dev_snap_info() wrapper function and use it to call the appropriate function for getting the snapshot name, size, and features, dependent on the rbd image format. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: get the snapshot context for a v2 imageAlex Elder1-0/+85
Fetch the snapshot context for an rbd format 2 image by calling the "get_snapcontext" method on its header object. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: get image features for a v2 imageAlex Elder1-0/+40
The features values for an rbd format 2 image are fetched from the server using a "get_features" method. The same method is used for getting the features for a snapshot, so structure this addition with a generic helper routine that can get this information for either. The server will provide two 64-bit feature masks, one representing the features potentially in use for this image (or its snapshot), and one representing features that must be supported by the client in order to work with the image. For the time being, neither of these is really used so we keep things simple and just record the first feature vector. Once we start using these feature masks, what we record and what we expose to the user will most likely change. Signed-off-by: Alex Elder <[email protected]>
2012-10-01rbd: get the object prefix for a v2 rbd imageAlex Elder1-1/+47
The object prefix of an rbd format 2 image is fetched from the server using a "get_object_prefix" method. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: add code to get the size of a v2 rbd imageAlex Elder1-0/+53
The size of an rbd format 2 image is fetched from the server using a "get_size" method. The same method is used for getting the size of a snapshot, so structure this addition with a generic helper routine that we can get this information for either. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: lay out header probe infrastructureAlex Elder1-28/+99
This defines a new function rbd_dev_probe() as a top-level function for populating detailed information about an rbd device. It first checks for the existence of a format 2 rbd image id object. If it exists, the image is assumed to be a format 2 rbd image, and another function rbd_dev_v2() is called to finish populating header data for that image. If it does not exist, it is assumed to be an old (format 1) rbd image, and calls a similar function rbd_dev_v1() to populate its header information. A new field, rbd_dev->format, is defined to record which version of the rbd image format the device represents. For a valid mapped rbd device it will have one of two values, 1 or 2. So far, the format 2 images are not really supported; this is laying out the infrastructure for fleshing out that support. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: encapsulate code that gets snapshot infoAlex Elder1-6/+30
Create a function that encapsulates looking up the name, size and features related to a given snapshot, which is indicated by its index in an rbd device's snapshot context array of snapshot ids. This interface will be used to hide differences between the format 1 and format 2 images. At the moment this (looking up the name anyway) is slightly less efficient than what's done currently, but we may be able to optimize this a bit later on by cacheing the last lookup if it proves to be a problem. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: add an rbd features fieldAlex Elder1-2/+41
Record the features values for each rbd image and each of its snapshots. This is really something that only becomes meaningful for version 2 images, so this is just putting in place code that will form common infrastructure. It may be useful to expand the sysfs entries--and therefore the information we maintain--for the image and for each snapshot. But I'm going to hold off doing that until we start making active use of the feature bits. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: don't use index in __rbd_add_snap_dev()Alex Elder1-6/+8
Pass the snapshot id and snapshot size rather than an index to __rbd_add_snap_dev() to specify values for a new snapshot. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2012-10-01rbd: kill create_snap sysfs entryAlex Elder1-158/+0
Josh proposed the following change, and I don't think I could explain it any better than he did: From: Josh Durgin <[email protected]> Date: Tue, 24 Jul 2012 14:22:11 -0700 To: ceph-devel <[email protected]> Message-ID: <[email protected]> Right now the kernel still has one piece of rbd management duplicated from the rbd command line tool: snapshot creation. There's nothing special about snapshot creation that makes it advantageous to do from the kernel, so I'd like to remove the create_snap sysfs interface. That is, /sys/bus/rbd/devices/<id>/create_snap would be removed. Does anyone rely on the sysfs interface for creating rbd snapshots? If so, how hard would it be to replace with: rbd snap create pool/image@snap Is there any benefit to the sysfs interface that I'm missing? Josh This patch implements this proposal, removing the code that implements the "snap_create" sysfs interface for rbd images. As a result, quite a lot of other supporting code goes away. Suggested-by: Josh Durgin <[email protected]> Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.