aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-11-20drm/i915/fbc: Bump ivb FBC max surface size to 4kx4kVille Syrjälä1-1/+1
IVB Bspec says: "Frame Buffer Compression is only supported with memory surfaces of 4096 lines or less and pipe source sizes of 4096 pixels by 2048 lines or less. " so seems like we should be able to bump the offset+size limit to at least 4kx4k. Make it so. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231117171833.25816-3-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-11-20drm/i915/fbc: Bump max surface size to 8kx4k on icl+Ville Syrjälä1-1/+4
FBC on icl+ should supposedly be fine with surface sizes up to 8kx4k. Bump up the limit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231117171833.25816-2-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-11-20drm/i915/fbc: Split plane size vs. surface size checks apartVille Syrjälä1-1/+31
Do separate checks for the visible plane size vs. the surface size (which I take to mean offset+size). For now both use the same max w/h, but we can relax the surface size limits as a followup. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231117171833.25816-1-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-11-20drm/i915: Also check for VGA converter in eDP probeVille Syrjälä1-6/+22
Unfortunately even the HPD based detection added in commit cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") fails to detect that the VBT's eDP/DDI-A is a ghost on Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD asserted despite nothing being actually connected there :( The straps/fuses also indicate that the eDP port is present. So if one boots with a VGA monitor connected the eDP probe will mistake the DP->VGA converter hooked to DDI-E for an eDP panel on DDI-A. As a last resort check what kind of DP device we've detected, and if it looks like a DP->VGA converter then conclude that the eDP port should be ignored. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636 Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114142333.15799-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-17drm/i915: convert vlv_dpio_read()/write() from pipe to phyJani Nikula5-151/+151
vlv_dpio_read() and vlv_dpio_write() really operate on the phy, not pipe. Passing the pipe instead of the phy as parameter is supposed to be a convenience, but when the caller has the phy, it becomes an inconvenience. See e.g. chv_dpio_cmn_power_well_enable() and assert_chv_phy_powergate(). Figure out the phy in the callers, and pass phy to the dpio functions. v2: retract one overzealous pipe->phy change (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114104534.4180144-3-jani.nikula@intel.com
2023-11-17drm/i915: add vlv_pipe_to_phy() helper to replace DPIO_PHY()Jani Nikula5-5/+24
Add a helper with better typing and handing for bogus input, and better in line with vlv_dig_port_to_channel(), vlv_dig_port_to_phy(), and vlv_pipe_to_channel(). Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114104534.4180144-2-jani.nikula@intel.com
2023-11-17drm/i915: move *_crtc_clock_get() to intel_dpll.cJani Nikula5-177/+181
Considering what the functions do, intel_dpll.c is a more suitable location, and lets us make some functions static while at it. This also means intel_display.c no longer does any DPIO access. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114104534.4180144-1-jani.nikula@intel.com
2023-11-17drm/i915/display: keep struct intel_display members sortedJani Nikula1-9/+9
Like the comment says, /* Grouping using anonymous structs. Keep sorted. */ Stick to it. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114155528.96935-1-jani.nikula@intel.com
2023-11-16drm/i915/dsb: DSB code refactoringAnimesh Manna4-62/+148
Refactor DSB implementation to be compatible with Xe driver. v1: RFC version. v2: Make intel_dsb structure opaque from external usage. [Jani] v3: Rebased on latest. v4: - Add boundary check in dsb_buffer_memset(). [Luca] - Use size_t instead of u32. [Luca] v5: WARN_ON() added for out of boudary case with some optimization. [Luca] v6: Rebased on latest and fix a rebase-miss. Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110032518.3564279-1-animesh.manna@intel.com
2023-11-15drm/i915: Fix fractional bpp handling in intel_link_bw_reduce_bpp()Imre Deak1-7/+7
Convert crtc_state->pipe_bpp to U6.4 format as expected by the rest of the function. Fixes: 59a266f068b4 ("drm/i915/display: Store compressed bpp in U6.4 format") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114141012.603960-1-imre.deak@intel.com
2023-11-15drm/i915/panelreplay: Debugfs support for panel replayAnimesh Manna1-24/+63
Add debugfs support which will print source and sink status per connector basis. Existing i915_psr_status and i915_psr_sink_status will be used to get the source and sink status of panel replay. v1: Initial version. [rb-ed by Arun] v2: Added check for DP 2.0 and connector type in connector_debugfs_add(). v3: Optimization and cosmetic changes. [Jouni] Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-7-animesh.manna@intel.com
2023-11-15drm/i915/xe2lpd: implement WA for underruns while enabling FBCVinod Govindapillai1-1/+7
FIFO underruns are observed when FBC is enabled on plane 2 or plane 3. Recommended WA is to update the FBC enabling sequence. The plane binding register bits need to be updated separately before programming the FBC enable bit. Bspec: 74151 Reviewed-by: Mika Kahola <mika.kahola@intel.com> #v3 Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231111114320.87277-2-vinod.govindapillai@intel.com
2023-11-14drm/i915/dp: Tune down FEC detection timeout error messageImre Deak1-2/+2
At least a Realtek DP branch device with the OUI 00-e0-4c dev-ID Dp1.4 HW-rev 1.0 SW-rev 131.1 device identification doesn't report detecting the FEC decoding start symbol. Tune down the corresponding error to a debug message. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113142051.258864-1-imre.deak@intel.com
2023-11-14drm/i915/display: Use int for entry setup framesMika Kahola1-3/+3
At least one TGL had regression when using u8 types for entry setup frames calculation. So, let's switch to use ints instead. intel_psr_entry_setup_frames() function expects to return u8 but since in case of error the error code -ETIME is returned. This doesn't fit into u8 and hence the return value is not as expected. Fixes: 2b981d57e480 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier") Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113093737.358137-1-mika.kahola@intel.com
2023-11-14drm/i915/dsc: Allow DSC only with fractional bpp when forced from debugfsSwati Sharma1-0/+7
If force_dsc_fractional_bpp_en is set through debugfs allow DSC iff compressed bpp is fractional. Continue if the computed compressed bpp turns out to be a integer. v2: -Use helpers for fractional, integral bits of bits_per_pixel. (Suraj) -Fix comment (Suraj) Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-9-ankit.k.nautiyal@intel.com
2023-11-14drm/i915/dsc: Add debugfs entry to validate DSC fractional bppSwati Sharma2-0/+85
DSC_Sink_BPP_Precision entry is added to i915_dsc_fec_support_show to depict sink's precision. Also, new debugfs entry is created to enforce fractional bpp. If Force_DSC_Fractional_BPP_en is set then while iterating over output bpp with fractional step size we will continue if output_bpp is computed as integer. With this approach, we will be able to validate DSC with fractional bpp. v2: Add drm_modeset_unlock to new line(Suraj) Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-8-ankit.k.nautiyal@intel.com
2023-11-14drm/i915/dp: Iterate over output bpp with fractional step sizeAnkit Nautiyal1-16/+25
This patch adds support to iterate over compressed output bpp as per the fractional step, supported by DP sink. v2: -Avoid ending up with compressed bpp, same as pipe bpp. (Stan) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-7-ankit.k.nautiyal@intel.com
2023-11-14drm/i915/dsc/mtl: Add support for fractional bppVandita Kulkarni2-8/+20
Consider the fractional bpp while reading the qp values. v2: Use helpers for fractional, integral bits of bits_per_pixel. (Suraj) Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-6-ankit.k.nautiyal@intel.com
2023-11-14drm/i915/audio: Consider fractional vdsc bpp while computing tu_dataAnkit Nautiyal1-8/+8
MTL+ supports fractional compressed bits_per_pixel, with precision of 1/16. This compressed bpp is stored in U6.4 format. Accommodate the precision during calculation of transfer unit data for hblank_early calculation. v2: -Fix tu_data calculation while dealing with U6.4 format. (Stan) v3: -Use BPP_X16_FMT to print vdsc bpp. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-5-ankit.k.nautiyal@intel.com
2023-11-14drm/i915/display: Consider fractional vdsc bpp while computing m_n valuesAnkit Nautiyal4-18/+19
MTL+ supports fractional compressed bits_per_pixel, with precision of 1/16. This compressed bpp is stored in U6.4 format. Accommodate this precision while computing m_n values. v1: Replace the computation of 'data_clock' with 'data_clock = DIV_ROUND_UP(data_clock, 16).' (Sui Jingfeng). v2: Rebase and pass bits_per_pixel in U6.4 format. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-4-ankit.k.nautiyal@intel.com
2023-11-14drm/i915/display: Store compressed bpp in U6.4 formatAnkit Nautiyal10-28/+33
DSC parameter bits_per_pixel is stored in U6.4 format. The 4 bits represent the fractional part of the bpp. Currently we use compressed_bpp member of dsc structure to store only the integral part of the bits_per_pixel. To store the full bits_per_pixel along with the fractional part, compressed_bpp is changed to store bpp in U6.4 formats. Intergral part is retrieved by simply right shifting the member compressed_bpp by 4. v2: -Use to_bpp_int, to_bpp_frac_dec, to_bpp_x16 helpers while dealing with compressed bpp. (Suraj) -Fix comment styling. (Suraj) v3: -Add separate file for 6.4 fixed point helper(Jani, Nikula) -Add comment for magic values(Suraj) v4: -Fix checkpatch warnings caused by renaming(Suraj) v5: -Rebase. -Use existing helpers for conversion of bpp_int to bpp_x16 and vice versa. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-3-ankit.k.nautiyal@intel.com
2023-11-14drm/display/dp: Add helper function to get DSC bpp precisionAnkit Nautiyal1-0/+27
Add helper to get the DSC bits_per_pixel precision for the DP sink. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-2-ankit.k.nautiyal@intel.com
2023-11-13drm/i915/mtl: C20 state verificationMika Kahola3-36/+88
Add state verification for C20 as we have one for C10. V2: Use abstractation of HW readout (Gustavo) Drop MPLLA/B from message for TX and CMN parameters (Gustavo) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> (v1,v2) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231109112148.309669-1-mika.kahola@intel.com
2023-11-11drm/i915: update in-source bug filing URLsJani Nikula3-3/+3
The bug filing documentation has been moved from the gitlab wiki to gitlab pages at https://drm.pages.freedesktop.org/intel-docs/. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110114807.3455739-2-jani.nikula@intel.com
2023-11-11drm/i915: remove excess functions from plane protection checkJani Nikula1-14/+4
Reduce the function calls by reusing ->decrypt. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231109160722.3372379-2-jani.nikula@intel.com
2023-11-11drm/i915: abstract plane protection checkJani Nikula1-4/+14
Centralize the conditions in a function. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231109160722.3372379-1-jani.nikula@intel.com
2023-11-10drm/i915/panelreplay: enable/disable panel replayAnimesh Manna3-16/+55
TRANS_DP2_CTL register is programmed to enable panel replay from source and sink is enabled through panel replay dpcd configuration address. Bspec: 1407940617 v1: Initial version. v2: - Use pr_* flags instead psr_* flags. [Jouni] - Remove intel_dp_is_edp check as edp1.5 also has panel replay. [Jouni] v3: Cover letter updated and selective fetch condition check is added before updating its bit in PSR2_MAN_TRK_CTL register. [Jouni] v4: Selective fetch related PSR2_MAN_TRK_CTL programmming dropped. [Jouni] v5: Added PSR2_MAN_TRK_CTL programming as needed for Continuous Full Frame (CFF) update. v6: Rebased on latest. Note: Initial plan is to enable panel replay in full-screen live active frame update mode. In a incremental approach panel replay will be enabled in selctive update mode if there is any gap in curent implementation. Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-6-animesh.manna@intel.com
2023-11-10drm/i915/panelreplay: Enable panel replay dpcd initialization for DPAnimesh Manna1-0/+3
Due to similarity panel replay dpcd initialization got added in psr function which is specific for edp panel. This patch enables panel replay initialization for dp connector. Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-5-animesh.manna@intel.com
2023-11-10drm/i915/panelreplay: Initializaton and compute config for panel replayAnimesh Manna5-40/+117
Modify existing PSR implementation to enable panel replay feature of DP 2.0 which is similar to PSR feature of EDP panel. There is different DPCD address to check panel capability compare to PSR and vsc sdp header is different. v1: Initial version. v2: - Set source_panel_replay_support flag under HAS_PANEL_REPLAY() condition check. [Jouni] - Code restructured around intel_panel_replay_init and renamed to intel_panel_replay_init_dpcd. [Jouni] - Remove the initial code modification around has_psr2 flag. [Jouni] - Add CAN_PANEL_REPLAY() in intel_encoder_can_psr which is used to enable in intel_psr_post_plane_update. [Jouni] v3: - Initialize both psr and panel-replay. [Jouni] - Initialize both panel replay and psr if detected. [Jouni] - Refactoring psr function by introducing _psr_compute_config(). [Jouni] - Add check for !is_edp while deriving source_panel_replay_support. [Jouni] - Enable panel replay dpcd initialization in a separate patch. [Jouni] v4: - HAS_PANEL_REPLAY() check not needed during sink capability check. [Jouni] - Set either panel replay source support or psr. [Jouni] v5: - HAS_PANEL_REPLAY() removed and use HAS_DP20() instead. [Jouni] - Move psr related code to intel_psr.c. [Jani] - Reset sink_panel_replay_support flag during disconnection. [Jani] v6: return statement restored which is removed by misatke. [Jouni] v7: cosmetic changes. [Arun] Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-4-animesh.manna@intel.com
2023-11-10drm/i915/psr: Move psr specific dpcd init into own functionJouni Högander1-18/+23
This patch is preparing adding panel replay specific dpcd init. Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-3-animesh.manna@intel.com
2023-11-08drm/i915/gvt: Clean up zero initializersVille Syrjälä3-5/+5
Just use a simple {} to zero initialize arrays/structs instead of the hodgepodge of stuff we are using currently. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012122442.15718-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-08drm/i915: Do plane/etc. updates more atomically across pipesVille Syrjälä1-2/+24
Perform all the intel_pre_update_crtc() stuff for all pipes first, and only then do the intel_update_crtc() vblank evasion stuff for every pipe back to back. This should make it more likely that the plane updates from multiple pipes happen on the same frame (assuming the pipes are running in sync, eg. due to bigjoiner or port sync). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-4-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2023-11-08drm/i915: Split intel_update_crtc() into two partsVille Syrjälä1-2/+14
Split intel_update_crtc() into two parts such that the first part performs all the non-vblank evasion preparatory stuff, and the second part just does the vblank evasion stuff. For now we just call these back to back so that there is no funcitonal change. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-3-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2023-11-08drm/i915: Drop redundant !modeset checkVille Syrjälä1-1/+1
Since commit 7de5b6b54630 ("drm/i915: Don't flag both full modeset and fastset at the same time") intel_crtc_needs_fastset() and intel_crtc_needs_modeset() have been mutually exclusive. Drop the redundant check. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-2-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2023-11-08drm/i915: Query compressed bpp properly using correct DPCD and DP Spec infoStanislav Lisovskiy3-36/+40
Currently we seem to be using wrong DPCD register for reading compressed bpps, reading min/max input bpc instead of compressed bpp. Fix that, so that we now apply min/max compressed bpp limitations we get from DP Spec Table 2-157 DP v2.0 and/or correspondent DPCD register DP_DSC_MAX_BITS_PER_PIXEL_LOW/HIGH. This might also allow us to get rid of an ugly compressed bpp recalculation, which we had to add to make some MST hubs usable. v2: - Fix operator precedence v3: - Added debug info about compressed bpps v4: - Don't try to intersect Sink input bpp and compressed bpps. v5: - Decrease step while looking for suitable compressed bpp to accommodate. v6: - Use helper for getting min and max compressed_bpp (Ankit) v7: - Fix checkpatch warning (Ankit) Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-31-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Check BW limitations only after all streams are computedImre Deak1-7/+1
After the previous patch the BW limits on the whole MST topology will be checked after computing the state for all the streams in the topology. Accordingly remove the check during the stream's encoder compute config step, to prevent failing an atomic commit due to a BW limit, if this can be resolved only by reducing the BW of other streams on the same MST link. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-30-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Improve BW sharing between MST streamsImre Deak7-7/+161
At the moment modesetting a stream CRTC will fail if the stream's BW along with the current BW of all the other streams on the same MST link is above the total BW of the MST link. Make the BW sharing more dynamic by trying to reduce the link bpp of one or more streams on the MST link in this case. When selecting a stream to reduce the BW for, take into account which link segment in the MST topology ran out of BW and which streams go through this link segment. For instance with A,B,C streams in the same MST topology A and B may share the BW of a link segment downstream of a branch device, stream C not downstream of the branch device, hence not affecting this BW. If this link segment's BW runs out one or both of stream A/B's BW will be reduced until their total BW is within limits. While reducing the link bpp for a given stream DSC may need to be enabled for it, which requires FEC on the whole MST link. Check for this condition and recompute the state for all streams taking the FEC overhead into account (on 8b/10b links). v2: - Rebase on s/min_bpp_pipes/min_bpp_reached_pipes/ change. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-29-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Force modeset CRTC if DSC toggling requires itImre Deak3-0/+93
Enabling / disabling DSC decompression in the branch device downstream of the source may reset the whole branch device. To avoid this while the streams are still active, force a modeset on all CRTC/ports connected to this branch device. v2: - Check the CRTC state for each connector in the topology, instead of the CRTC being checked for a modeset requirement. (Ville) - Add DocBook for the new function. v3: - Rebased on a change not to use intel_modeset_pipes_in_mask_early(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1) Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-8-imre.deak@intel.com
2023-11-08drm/i915: Factor out function to clear pipe update flagsImre Deak1-26/+23
Factor out a helper to clear the pipe update flags, used by a follow-up patch to modeset an MST topology. v2: - Move the intel_crtc_needs_modeset() check to the callers. (Ville) v3 (Ville): - Rename clear_pipe_update_flags_on_modeset_crtc() to intel_crtc_flag_modeset(). - Also set crtc_state->uapi.mode_changed in the function. - Leave out the unrelated change to use intel_modeset_pipes_in_mask_early(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1) Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-7-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Enable MST DSC decompression for all streamsImre Deak4-21/+82
Enable DSC decompression for all streams. In particular atm if a sink is connected to a last branch device that is downstream of the first branch device connected to the source, decompression is not enabled for it. Similarly it's not enabled if the sink supports this with the last branch device passing through the compressed stream to it. Enable DSC in the above cases as well. Since last branch devices may handle the decompression for multiple ports, toggling DSC needs to be refcounted, add this using the DSC AUX device as a reference. v2: - Fix refcounting, setting/clearing connector->dp.dsc_decompression_enabled always as needed. (Stan) - Make the refcounting more uniform for the SST vs. MST case. - Add state checks for connector->dp.dsc_decompression_enabled and connector crtc. - Sanitize connector DSC decompression state during HW setup. - s/use_count/ref_count/ v3: - Remove stale TODO: comment to set the actual decompression_aux. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-6-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Enable DSC passthroughImre Deak1-2/+20
Enable passing through DSC streams to the sink in last branch devices. v2: - Fix the DPCD register address while setting/clearing the passthrough flag. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-25-imre.deak@intel.com
2023-11-08drm/i915/dp: Enable DSC via the connector decompression AUXImre Deak4-21/+101
Enable DSC using the DSC AUX device stored for this purpose in the connector. For clarity add separate functions to enable/disable the decompression, since these sequences will diverge more in follow-up patches that also enable/disable DSC passthrough and on MST do the actual enabling/disabling only for the first/last user of the given AUX device. As a preparation for the latter refcounting change, also pass the atomic state to the functions. While at it set/clear only the DP_DECOMPRESSION_EN flag in the DP_DSC_ENABLE DPCD register, preserving the reserved register bits. Besides preserving the reserved register bits, the behavior stays as before, as DSC is still only enabled for the first MST stream (which a follow-up patch changes, enabling it for all streams). v2: - Add a helper function setting/clearing the decompression flag, preserving the reserved register bits. v3: - Add separate functions to enable/disable decompression and pass the atomic state to these. - Add DocBook for both functions. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v2) Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-24-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Enable decompression in the sink from the MST encoder hooksImre Deak2-5/+22
Enable/disable the DSC decompression in the sink/branch from the MST encoder hooks. This prepares for an upcoming patch toggling DSC for each stream as needed, but for now keeps the current behavior, as DSC is only enabled for the first MST stream. v2: - Rebased on latest drm-tip. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-5-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Handle the Synaptics HBlank expansion quirkImre Deak2-4/+131
The Synaptics MST hubs expose some sink EDID modes with a reduced HBLANK period, presumedly to save BW, which the hub expands before forwarding the stream to the sink. In particular a 4k mode with a standard CVT HBLANK period is exposed with either a CVT reduced blank RBv1,v2 (80, 160 pixel) or a non-CVT 56 pixel HBLANK period. The DP standard describes the above HBLANK expansion functionality, but it requires enabling this explicitly, whereas these hubs apply the expansion transparently. In some TBT docks with such a Synaptics hub (DELL WD22TB4) the above modes will work okay until DSC decompression is enabled in the hub for the given sink, but after this the same mode will not work reliably in decompressed mode. In another TBT dock (Thinkpad 40B0) the above modes will not work in uncompressed/18bpp mode (regardless of whether DSC decompression was enabled before or not). As a workaround force enable DSC for such modes. Apply the WA when the HBLANK period is 300ns or below, matching the above tested modes with a 533.25MHz dotclock and maximum 160 HBLANK pixels. OTOH DSC for these modes will only work above a certain compressed bpp threshold which depends on the link rate, so apply this limit as well in the workaround. On platforms, pipe/port configurations where DSC is not supported, for instance on ICL where DSC/MST is still work-in-progress, limit the minimum link bpp to 24. Apply the workaround only for Synaptics hubs which support the HBLANK expansion. v2: - Apply the WA whenever the HBLANK period is 300ns or below. v3: - Clarify in the commit log the failure modes of the different docks. - Handle platforms/pipe/port configurations without DSC support. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1) Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-4-imre.deak@intel.com
2023-11-08drm/i915/dp: Disable FEC ready flag in the sinkImre Deak1-8/+13
Disable the FEC ready flag in the sink during a disabling modeset. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-21-imre.deak@intel.com
2023-11-08drm/i915/dp: Wait for FEC detected status in the sinkImre Deak3-0/+80
As required by the DP standard wait for the sink to detect the FEC decode enabling symbol sent by the source. There is a difference between SST and MST when the source enables the FEC encoding: on SST this happens only after enabling the transcoder, whereas on MST it happens already after enabling the transcoder function (before enabling the transcoder). Wait for the detected status at the earliest spot accordingly. v2: - Wait for the FEC detected status on SST after the transcoder is enabled. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-20-imre.deak@intel.com
2023-11-08drm/i915/dp: Rename intel_ddi_disable_fec_state() to intel_ddi_disable_fec()Imre Deak1-5/+4
Rename intel_ddi_disable_fec_state() to intel_ddi_disable_fec(), for symmetry with intel_ddi_enable_fec(). Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-19-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Add missing DSC compression disablingImre Deak1-0/+2
Add the missing DSC compression disabling step for MST streams, similarly to how this is done for SST outputs. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-18-imre.deak@intel.com
2023-11-08drm/i915/dp: Make sure the DSC PPS SDP is disabled whenever DSC is disabledImre Deak2-4/+6
Atm the DSC PPS SDP will stay enabled after enabling and disabling DSC. This leaves an output blank after switching off DSC on it. Make sure the SDP is disabled for an uncompressed output. v2: - Disable the SDP already during output disabling. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-17-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Program the DSC PPS SDP for each streamImre Deak2-5/+8
Atm the DSC PPS SDP is programmed only if the first stream is compressed and then it's programmed only for the first stream. This left all other compressed streams blank. Program the SDP for all streams. v2: - Rebase on upstream include "intel_vdsc.h" change. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-3-imre.deak@intel.com
Powered by cgit, Gruvboxed by Blaster4385.