aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-07-27Merge tag 'phy-fixes-6.5' of ↵Linus Torvalds4-31/+53
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Out of bound fix for hisilicon phy - Qualcomm synopsis femto phy for keeping clock enabled during suspend and enabling ref clocks - Mediatek driver fixes for upper limit test and error code * tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe() phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code phy: qcom-snps-femto-v2: properly enable ref clock phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test phy: phy-mtk-dp: Fix an error code in probe()
2023-07-27media: venus: Use struct_size_t() helper in pkt_session_unset_buffers()Gustavo A. R. Silva1-2/+2
Prefer struct_size_t() over struct_size() when no pointer instance of the structure type is present. Signed-off-by: "Gustavo A. R. Silva" <[email protected]> Reviewed-by: Vikash Garodia <[email protected]> Link: https://lore.kernel.org/r/ZKBfoqSl61jfpO2r@work Signed-off-by: Kees Cook <[email protected]>
2023-07-27hwmon: (k10temp) Enable AMD3255 Proc to show negative temperatureBaskaran Kannan1-2/+15
Industrial processor i3255 supports temperatures -40 deg celcius to 105 deg Celcius. The current implementation of k10temp_read_temp rounds off any negative temperatures to '0'. To fix this, the following changes have been made. A flag 'disp_negative' is added to struct k10temp_data to support AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor is found during k10temp_probe. Flag 'disp_negative' is used to determine whether to round off negative temperatures to '0' in k10temp_read_temp. Signed-off-by: Baskaran Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: aef17ca12719 ("hwmon: (k10temp) Only apply temperature offset if result is positive") Cc: [email protected] [groeck: Fixed multi-line comment] Signed-off-by: Guenter Roeck <[email protected]>
2023-07-27mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op()Christophe JAILLET1-1/+1
'op-cs' is copied in 'fun->mchip_number' which is used to access the 'mchip_offsets' and the 'rnb_gpio' arrays. These arrays have NAND_MAX_CHIPS elements, so the index must be below this limit. Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This would lead to out-of-bound accesses. Fixes: 54309d657767 ("mtd: rawnand: fsl_upm: Implement exec_op()") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/cd01cba1c7eda58bdabaae174c78c067325803d2.1689803636.git.christophe.jaillet@wanadoo.fr
2023-07-27mtd: spi-nor: avoid holes in struct spi_mem_opArnd Bergmann1-2/+2
gcc gets confused when -ftrivial-auto-var-init=pattern is used on sparse bit fields such as 'struct spi_mem_op', which caused the previous false positive warning about an uninitialized variable: drivers/mtd/spi-nor/spansion.c: error: 'op' is used uninitialized [-Werror=uninitialized] In fact, the variable is fully initialized and gcc does not see it being used, so the warning is entirely bogus. The problem appears to be a misoptimization in the initialization of single bit fields when the rest of the bytes are not initialized. A previous workaround added another initialization, which ended up shutting up the warning in spansion.c, though it apparently still happens in other files as reported by Peter Foley in the gcc bugzilla. The workaround of adding a fake initialization seems particularly bad because it would set values that can never be correct but prevent the compiler from warning about actually missing initializations. Revert the broken workaround and instead pad the structure to only have bitfields that add up to full bytes, which should avoid this behavior in all drivers. I also filed a new bug against gcc with what I found, so this can hopefully be addressed in future gcc releases. At the moment, only gcc-12 and gcc-13 are affected. Cc: Peter Foley <[email protected]> Cc: Pedro Falcato <[email protected]> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110743 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108402 Link: https://godbolt.org/z/efMMsG1Kx Fixes: 420c4495b5e56 ("mtd: spi-nor: spansion: make sure local struct does not contain garbage") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Tudor Ambarus <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2023-07-27iommufd: Set end correctly when doing batch carryJason Gunthorpe1-1/+1
Even though the test suite covers this it somehow became obscured that this wasn't working. The test iommufd_ioas.mock_domain.access_domain_destory would blow up rarely. end should be set to 1 because this just pushed an item, the carry, to the pfns list. Sometimes the test would blow up with: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 5 PID: 584 Comm: iommufd Not tainted 6.5.0-rc1-dirty #1236 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:batch_unpin+0xa2/0x100 [iommufd] Code: 17 48 81 fe ff ff 07 00 77 70 48 8b 15 b7 be 97 e2 48 85 d2 74 14 48 8b 14 fa 48 85 d2 74 0b 40 0f b6 f6 48 c1 e6 04 48 01 f2 <48> 8b 3a 48 c1 e0 06 89 ca 48 89 de 48 83 e7 f0 48 01 c7 e8 96 dc RSP: 0018:ffffc90001677a58 EFLAGS: 00010246 RAX: 00007f7e2646f000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 00000000fefc4c8d RDI: 0000000000fefc4c RBP: ffffc90001677a80 R08: 0000000000000048 R09: 0000000000000200 R10: 0000000000030b98 R11: ffffffff81f3bb40 R12: 0000000000000001 R13: ffff888101f75800 R14: ffffc90001677ad0 R15: 00000000000001fe FS: 00007f9323679740(0000) GS:ffff8881ba540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000105ede003 CR4: 00000000003706a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x5c/0x70 ? __die+0x1f/0x60 ? page_fault_oops+0x15d/0x440 ? lock_release+0xbc/0x240 ? exc_page_fault+0x4a4/0x970 ? asm_exc_page_fault+0x27/0x30 ? batch_unpin+0xa2/0x100 [iommufd] ? batch_unpin+0xba/0x100 [iommufd] __iopt_area_unfill_domain+0x198/0x430 [iommufd] ? __mutex_lock+0x8c/0xb80 ? __mutex_lock+0x6aa/0xb80 ? xa_erase+0x28/0x30 ? iopt_table_remove_domain+0x162/0x320 [iommufd] ? lock_release+0xbc/0x240 iopt_area_unfill_domain+0xd/0x10 [iommufd] iopt_table_remove_domain+0x195/0x320 [iommufd] iommufd_hw_pagetable_destroy+0xb3/0x110 [iommufd] iommufd_object_destroy_user+0x8e/0xf0 [iommufd] iommufd_device_detach+0xc5/0x140 [iommufd] iommufd_selftest_destroy+0x1f/0x70 [iommufd] iommufd_object_destroy_user+0x8e/0xf0 [iommufd] iommufd_destroy+0x3a/0x50 [iommufd] iommufd_fops_ioctl+0xfb/0x170 [iommufd] __x64_sys_ioctl+0x40d/0x9a0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Fixes: f394576eb11d ("iommufd: PFN handling for iopt_pages") Reviewed-by: Kevin Tian <[email protected]> Tested-by: Nicolin Chen <[email protected]> Reported-by: Nicolin Chen <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2023-07-27iommufd: IOMMUFD_DESTROY should not increase the refcountJason Gunthorpe3-30/+75
syzkaller found a race where IOMMUFD_DESTROY increments the refcount: obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY); if (IS_ERR(obj)) return PTR_ERR(obj); iommufd_ref_to_users(obj); /* See iommufd_ref_to_users() */ if (!iommufd_object_destroy_user(ucmd->ictx, obj)) As part of the sequence to join the two existing primitives together. Allowing the refcount the be elevated without holding the destroy_rwsem violates the assumption that all temporary refcount elevations are protected by destroy_rwsem. Racing IOMMUFD_DESTROY with iommufd_object_destroy_user() will cause spurious failures: WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478 Modules linked in: CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477 Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41 RSP: 0018:ffffc90003067e08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500 R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88 R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0 Call Trace: <TASK> iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline] iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813 iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The solution is to not increment the refcount on the IOMMUFD_DESTROY path at all. Instead use the xa_lock to serialize everything. The refcount check == 1 and xa_erase can be done under a single critical region. This avoids the need for any refcount incrementing. It has the downside that if userspace races destroy with other operations it will get an EBUSY instead of waiting, but this is kind of racing is already dangerous. Fixes: 2ff4bed7fee7 ("iommufd: File descriptor, context, kconfig and makefiles") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Kevin Tian <[email protected]> Reported-by: [email protected] Signed-off-by: Jason Gunthorpe <[email protected]>
2023-07-27Merge tag 'memory-controller-drv-fixes-6.5' of ↵Arnd Bergmann3-24/+41
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes Memory controller drivers - fixes for v6.5 Two fixes are needed for Tegra194 memory controllers caused by the same Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now interconnect from the memory controller, which was set only for Tegra234, but not for Tegra194, causing probe deferrals. Expose some dummy interconnect provider for Tegra194, to satisfy PCI driver needs. * tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: tegra: make icc_set_bw return zero if BWMGR not supported memory: tegra: Add dummy implementation on Tegra194 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-07-27Merge tag 'imx-fixes-6.5' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.5: - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU frequency of sk-imx53 board - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux - A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct VPU label and gpio-line-names - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev child, so that runtime PM can translate into the necessary GPC power domain action * tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child ARM: dts: nxp/imx: limit sk-imx53 supported frequencies arm64: dts: freescale: Fix VPU G2 clock arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux arm64: dts: phycore-imx8mm: Correction in gpio-line-names arm64: dts: phycore-imx8mm: Label typo-fix of VPU ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon Signed-off-by: Arnd Bergmann <[email protected]>
2023-07-27ublk: return -EINTR if breaking from waiting for existed users in DEL_DEVMing Lei1-2/+2
If user interrupts wait_event_interruptible() in ublk_ctrl_del_dev(), return -EINTR and let user know what happens. Fixes: 0abe39dec065 ("block: ublk: improve handling device deletion") Reported-by: Stefano Garzarella <[email protected]> Signed-off-by: Ming Lei <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-07-27ublk: fail to recover device if queue setup is interruptedMing Lei1-1/+3
In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be triggered. Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support") Reported-by: Stefano Garzarella <[email protected]> Signed-off-by: Ming Lei <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-07-27ublk: fail to start device if queue setup is interruptedMing Lei1-1/+2
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered. Reported by German when working on qemu-storage-deamon which requires single thread ublk daemon. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reported-by: German Maglione <[email protected]> Signed-off-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-07-27x86/srso: Add a Speculative RAS Overflow mitigationBorislav Petkov (AMD)1-0/+8
Add a mitigation for the speculative return address stack overflow vulnerability found on AMD processors. The mitigation works by ensuring all RET instructions speculate to a controlled location, similar to how speculation is controlled in the retpoline sequence. To accomplish this, the __x86_return_thunk forces the CPU to mispredict every function return using a 'safe return' sequence. To ensure the safety of this mitigation, the kernel must ensure that the safe return sequence is itself free from attacker interference. In Zen3 and Zen4, this is accomplished by creating a BTB alias between the untraining function srso_untrain_ret_alias() and the safe return function srso_safe_ret_alias() which results in evicting a potentially poisoned BTB entry and using that safe one for all function returns. In older Zen1 and Zen2, this is accomplished using a reinterpretation technique similar to Retbleed one: srso_untrain_ret() and srso_safe_ret(). Signed-off-by: Borislav Petkov (AMD) <[email protected]>
2023-07-27usb: misc: ehset: fix wrong if conditionXu Yang1-4/+4
A negative number from ret means the host controller had failed to send usb message and 0 means succeed. Therefore, the if logic is wrong here and this patch will fix it. Fixes: f2b42379c576 ("usb: misc: ehset: Rework test mode entry") Cc: stable <[email protected]> Signed-off-by: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-27usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phyGratian Crisan1-2/+4
Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for USB device-mode. The phy chip usually has its 'reset' and 'chip select' lines connected to GPIOs described by ACPI fwnodes in the DSDT table. Because of hardware with missing ACPI resources for the 'reset' and 'chip select' GPIOs commit 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") introduced a fallback gpiod_lookup_table with hard-coded mappings for Bay Trail devices. However there are existing Bay Trail based devices, like the National Instruments cRIO-903x series, where the phy chip has its 'reset' and 'chip-select' lines always asserted in hardware via resistor pull-ups. On this hardware the phy chip is always enabled and the ACPI dsdt table is missing information not only for the 'chip-select' and 'reset' lines but also for the BYT GPIO controller itself "INT33FC". With the introduction of the gpiod_lookup_table initializing the USB device-mode on these hardware now errors out. The error comes from the gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an -ENOENT error due to the missing ACPI entry for the INT33FC gpio controller used in the aforementioned table. This hardware used to work before because gpiod_get_optional() will return NULL instead of -ENOENT if no GPIO has been assigned to the requested function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs was then skipped (due to the NULL return). This is the correct behavior in cases where the phy chip is hardwired and there are no GPIOs to control. Since the gpiod_lookup_table relies on the presence of INT33FC fwnode in ACPI tables only add the table if we know the entry for the INT33FC gpio controller is present. This allows Bay Trail based devices with hardwired dwc3 ULPI phys to continue working. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: stable <[email protected]> Signed-off-by: Gratian Crisan <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-27benet: fix return value check in be_lancer_xmit_workarounds()Yuanjun Gong1-1/+2
in be_lancer_xmit_workarounds(), it should go to label 'tx_drop' if an unexpected value is returned by pskb_trim(). Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug") Signed-off-by: Yuanjun Gong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-07-27staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()Zhang Shurong1-2/+4
The "exc->key_len" is a u16 that comes from the user. If it's over IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption. Fixes: b121d84882b9 ("staging: ks7010: simplify calls to memcpy()") Cc: stable <[email protected]> Signed-off-by: Zhang Shurong <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-27staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVERRaphael Gallais-Pou1-1/+1
Using FBTFT_REGISTER_DRIVER resolves to a NULL struct spi_device_id. This ultimately causes a warning when the module probes. Fixes it. Signed-off-by: Raphael Gallais-Pou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-27drm/ttm: check null pointer before accessing when swappingGuchun Chen1-1/+2
Add a check to avoid null pointer dereference as below: [ 90.002283] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 90.002292] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 90.002346] ? exc_general_protection+0x159/0x240 [ 90.002352] ? asm_exc_general_protection+0x26/0x30 [ 90.002357] ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm] [ 90.002365] ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm] [ 90.002373] ttm_bo_swapout+0x134/0x7f0 [ttm] [ 90.002383] ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm] [ 90.002391] ? lock_acquire+0x44d/0x4f0 [ 90.002398] ? ttm_device_swapout+0xa5/0x260 [ttm] [ 90.002412] ? lock_acquired+0x355/0xa00 [ 90.002416] ? do_raw_spin_trylock+0xb6/0x190 [ 90.002421] ? __pfx_lock_acquired+0x10/0x10 [ 90.002426] ? ttm_global_swapout+0x25/0x210 [ttm] [ 90.002442] ttm_device_swapout+0x198/0x260 [ttm] [ 90.002456] ? __pfx_ttm_device_swapout+0x10/0x10 [ttm] [ 90.002472] ttm_global_swapout+0x75/0x210 [ttm] [ 90.002486] ttm_tt_populate+0x187/0x3f0 [ttm] [ 90.002501] ttm_bo_handle_move_mem+0x437/0x590 [ttm] [ 90.002517] ttm_bo_validate+0x275/0x430 [ttm] [ 90.002530] ? __pfx_ttm_bo_validate+0x10/0x10 [ttm] [ 90.002544] ? kasan_save_stack+0x33/0x60 [ 90.002550] ? kasan_set_track+0x25/0x30 [ 90.002554] ? __kasan_kmalloc+0x8f/0xa0 [ 90.002558] ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu] [ 90.003023] ? ttm_resource_alloc+0xf6/0x220 [ttm] [ 90.003038] amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu] [ 90.003210] ? __x64_sys_ioctl+0x131/0x1a0 [ 90.003210] ? do_syscall_64+0x60/0x90 Fixes: a2848d08742c ("drm/ttm: never consider pinned BOs for eviction&swap") Tested-by: Mikhail Gavrilov <[email protected]> Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2023-07-27staging: r8712: Fix memory leak in _r8712_init_xmit_priv()Larry Finger2-9/+40
In the above mentioned routine, memory is allocated in several places. If the first succeeds and a later one fails, the routine will leak memory. This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel"). A potential memory leak in r8712_xmit_resource_alloc() is also addressed. Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/x/log.txt?x=11ac3fa0a80000 Cc: [email protected] Cc: Nam Cao <[email protected]> Signed-off-by: Larry Finger <[email protected]> Reviewed-by: Nam Cao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-27xen: speed up grant-table reclaimDemi Marie Obenour1-11/+29
When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. Cc: [email protected] Signed-off-by: Demi Marie Obenour <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2023-07-26virtio-net: fix race between set queues and probeJason Wang1-2/+2
A race were found where set_channels could be called after registering but before virtnet_set_queues() in virtnet_probe(). Fixing this by moving the virtnet_set_queues() before netdevice registering. While at it, use _virtnet_set_queues() to avoid holding rtnl as the device is not even registered at that time. Cc: [email protected] Fixes: a220871be66f ("virtio-net: correctly enable multiqueue") Signed-off-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Reviewed-by: Xuan Zhuo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-26net: fec: tx processing does not call XDP APIs if budget is 0Wei Fang1-4/+12
According to the clarification [1] in the latest napi.rst, the tx processing cannot call any XDP (or page pool) APIs if the "budget" is 0. Because NAPI is called with the budget of 0 (such as netpoll) indicates we may be in an IRQ context, however, we cannot use the page pool from IRQ context. [1] https://lore.kernel.org/all/[email protected]/ Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames") Signed-off-by: Wei Fang <[email protected]> Suggested-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-26hwmon: (pmbus_core) Fix Deadlock in pmbus_regulator_get_statusGuenter Roeck1-1/+2
pmbus_regulator_get_status() acquires update_lock. pmbus_regulator_get_error_flags() acquires it again, resulting in an immediate deadlock. Call _pmbus_get_flags() from pmbus_regulator_get_status() directly to avoid the problem. Reported-by: Patrick Rudolph <[email protected]> Closes: https://lore.kernel.org/linux-hwmon/[email protected]/T/#u Cc: Naresh Solanki <[email protected]> Cc: [email protected] # v6.2+ Fixes: c05f477c4ba3 ("hwmon: (pmbus/core) Implement regulator get_status") Signed-off-by: Guenter Roeck <[email protected]>
2023-07-26net/mlx5: Unregister devlink params in case interface is downShay Drory1-0/+1
Currently, in case an interface is down, mlx5 driver doesn't unregister its devlink params, which leads to this WARN[1]. Fix it by unregistering devlink params in that case as well. [1] [ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc [ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61 [ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023 [ 295.543096 ] pc : devlink_free+0x174/0x1fc [ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.561816 ] sp : ffff80000809b850 [ 295.711155 ] Call trace: [ 295.716030 ] devlink_free+0x174/0x1fc [ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core] [ 295.743534 ] auxiliary_bus_remove+0x2c/0x50 [ 295.751893 ] __device_release_driver+0x19c/0x280 [ 295.761120 ] device_release_driver+0x34/0x50 [ 295.769649 ] bus_remove_device+0xdc/0x170 [ 295.777656 ] device_del+0x17c/0x3a4 [ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core] [ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core] [ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core] [ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core] [ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core] [ 295.833439 ] pci_device_shutdown+0x3c/0xa0 [ 295.841651 ] device_shutdown+0x170/0x340 [ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0 [ 295.857322 ] __arm64_sys_reboot+0x2c/0x40 [ 295.865329 ] invoke_syscall+0x78/0x100 [ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184 [ 295.882392 ] do_el0_svc+0x30/0xac [ 295.889008 ] el0_svc+0x48/0x160 [ 295.895278 ] el0t_64_sync_handler+0xa4/0x130 [ 295.903807 ] el0t_64_sync+0x1a4/0x1a8 [ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]--- Fixes: fe578cbb2f05 ("net/mlx5: Move devlink registration before mlx5_load") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Maher Sanalla <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5: DR, Fix peer domain namespace settingShay Drory12-29/+38
The offending patch is based on the assumption that for PFs, mlx5_get_dev_index() is the same as vhca_id. However, this assumption is wrong in case of DPU (ECPF). Fix it by using vhca_id directly, and switch the array of peers to xarray. Fixes: 6d5b7321d8af ("net/mlx5: DR, handle more than one peer domain") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supportedChris Mi2-2/+1
The cited commit sets ft prio to fs_base_prio. But if ignore_flow_level it not supported, ft prio must be set based on tc filter prio. Otherwise, all the ft prio are the same on the same chain. It is invalid if ignore_flow_level is not supported. Fix it by setting ft prio based on tc filter prio and setting fs_base_prio to 0 for fdb. Fixes: 8e80e5648092 ("net/mlx5: fs_chains: Refactor to detach chains from tc usage") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Paul Blakey <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reloadJianbo Liu2-11/+26
There are DEK objects cached in DEK pool after kTLS is used, and they are freed only in mlx5e_ktls_cleanup(). mlx5e_destroy_mdev_resources() is called in mlx5e_suspend() to free mdev resources, including protection domain (PD). However, PD is still referenced by the cached DEK objects in this case, because profile->cleanup() (and therefore mlx5e_ktls_cleanup()) is called after mlx5e_suspend() during devlink reload. So the following FW syndrome is generated: mlx5_cmd_out_err:803:(pid 12948): DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0xef0c8a), err(-22) To avoid this syndrome, move DEK pool destruction to mlx5e_ktls_cleanup_tx(), which is called by profile->cleanup_tx(). And move pool creation to mlx5e_ktls_init_tx() for symmetry. Fixes: f741db1a5171 ("net/mlx5e: kTLS, Improve connection rate by using fast update encryption key") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5: Bridge, set debugfs access right to root-onlyVlad Buslov1-1/+1
As suggested during code review set the access rights for bridge 'fdb' debugfs file to root-only. Fixes: 791eb78285e8 ("net/mlx5: Bridge, expose FDB state via debugfs") Reported-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5e: xsk: Fix crash on regular rq reactivationDragos Tatulea1-8/+21
When the regular rq is reactivated after the XSK socket is closed it could be reading stale cqes which eventually corrupts the rq. This leads to no more traffic being received on the regular rq and a crash on the next close or deactivation of the rq. Kal Cuttler Conely reported this issue as a crash on the release path when the xdpsock sample program is stopped (killed) and restarted in sequence while traffic is running. This patch flushes all cqes when during the rq flush. The cqe flushing is done in the reset state of the rq. mlx5e_rq_to_ready code is moved into the flush function to allow for this. Fixes: 082a9edf12fe ("net/mlx5e: xsk: Flush RQ on XSK activation to save memory") Reported-by: Kal Cutter Conley <[email protected]> Closes: https://lore.kernel.org/xdp-newbies/CAHApi-nUAs4TeFWUDV915CZJo07XVg2Vp63-no7UDfj6wur9nQ@mail.gmail.com Signed-off-by: Dragos Tatulea <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5e: xsk: Fix invalid buffer access for legacy rqDragos Tatulea1-1/+4
The below crash can be encountered when using xdpsock in rx mode for legacy rq: the buffer gets released in the XDP_REDIRECT path, and then once again in the driver. This fix sets the flag to avoid releasing on the driver side. XSK handling of buffers for legacy rq was relying on the caller to set the skip release flag. But the referenced fix started using fragment counts for pages instead of the skip flag. Crash log: general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28 Code: ... RSP: 0018:ffff88810082fc98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00 FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x32/0x80 ? exc_general_protection+0x192/0x390 ? asm_exc_general_protection+0x22/0x30 ? 0xffffffffa000b514 ? bpf_prog_03b13f331978c78c+0xf/0x28 mlx5e_xdp_handle+0x48/0x670 [mlx5_core] ? dev_gro_receive+0x3b5/0x6e0 mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core] mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core] mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core] mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core] __napi_poll+0x25/0x1a0 net_rx_action+0x28a/0x300 __do_softirq+0xcd/0x279 ? sort_range+0x20/0x20 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xa2/0x130 kthread+0xc9/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- Fixes: 7abd955a58fb ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP") Signed-off-by: Dragos Tatulea <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5e: Move representor neigh cleanup to profile cleanup_txJianbo Liu1-10/+7
For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as the flow is duplicated to the peer eswitch, the related neighbour information on the peer uplink representor is created as well. In the cited commit, eswitch devcom unpair is moved to uplink unload API, specifically the profile->cleanup_tx. If there is a encap rule offloaded in ECMP mode, when one eswitch does unpair (because of unloading the driver, for instance), and the peer rule from the peer eswitch is going to be deleted, the use-after-free error is triggered while accessing neigh info, as it is already cleaned up in uplink's profile->disable, which is before its profile->cleanup_tx. To fix this issue, move the neigh cleanup to profile's cleanup_tx callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh init is moved to init_tx for symmeter. [ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496 [ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15 [ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2453.384335] Call Trace: [ 2453.384625] <TASK> [ 2453.384891] dump_stack_lvl+0x33/0x50 [ 2453.385285] print_report+0xc2/0x610 [ 2453.385667] ? __virt_addr_valid+0xb1/0x130 [ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.386757] kasan_report+0xae/0xe0 [ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core] [ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core] [ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core] [ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core] [ 2453.391015] ? complete_all+0x43/0xd0 [ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core] [ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core] [ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core] [ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core] [ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core] [ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core] [ 2453.395268] ? down_write+0xaa/0x100 [ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core] [ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core] [ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core] [ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core] [ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core] [ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core] [ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core] [ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core] [ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core] [ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core] [ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core] [ 2453.405170] ? up_write+0x39/0x60 [ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0 [ 2453.405985] auxiliary_bus_remove+0x2e/0x40 [ 2453.406405] device_release_driver_internal+0x243/0x2d0 [ 2453.406900] ? kobject_put+0x42/0x2d0 [ 2453.407284] bus_remove_device+0x128/0x1d0 [ 2453.407687] device_del+0x240/0x550 [ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0 [ 2453.408511] ? kobject_put+0xfa/0x2d0 [ 2453.408889] ? __kmem_cache_free+0x14d/0x280 [ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core] [ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core] [ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core] [ 2453.411111] remove_one+0x89/0x130 [mlx5_core] [ 2453.411628] pci_device_remove+0x59/0xf0 [ 2453.412026] device_release_driver_internal+0x243/0x2d0 [ 2453.412511] ? parse_option_str+0x14/0x90 [ 2453.412915] driver_detach+0x7b/0xf0 [ 2453.413289] bus_remove_driver+0xb5/0x160 [ 2453.413685] pci_unregister_driver+0x3f/0xf0 [ 2453.414104] mlx5_cleanup+0xc/0x20 [mlx5_core] Fixes: 2be5bd42a5bb ("net/mlx5: Handle pairing of E-switch via uplink un/load APIs") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is setAmir Tzin1-0/+10
Moving to switchdev mode with ntuple offload on causes the kernel to crash since fs->arfs is freed during nic profile cleanup flow. Ntuple offload is not supported in switchdev mode and it is already unset by mlx5 fix feature ndo in switchdev mode. Verify fs->arfs is valid before disabling it. trace: [] RIP: 0010:_raw_spin_lock_bh+0x17/0x30 [] arfs_del_rules+0x44/0x1a0 [mlx5_core] [] mlx5e_arfs_disable+0xe/0x20 [mlx5_core] [] mlx5e_handle_feature+0x3d/0xb0 [mlx5_core] [] ? __rtnl_unlock+0x25/0x50 [] mlx5e_set_features+0xfe/0x160 [mlx5_core] [] __netdev_update_features+0x278/0xa50 [] ? netdev_run_todo+0x5e/0x2a0 [] netdev_update_features+0x22/0x70 [] ? _cond_resched+0x15/0x30 [] mlx5e_attach_netdev+0x12a/0x1e0 [mlx5_core] [] mlx5e_netdev_attach_profile+0xa1/0xc0 [mlx5_core] [] mlx5e_netdev_change_profile+0x77/0xe0 [mlx5_core] [] mlx5e_vport_rep_load+0x1ed/0x290 [mlx5_core] [] mlx5_esw_offloads_rep_load+0x88/0xd0 [mlx5_core] [] esw_offloads_load_rep.part.38+0x31/0x50 [mlx5_core] [] esw_offloads_enable+0x6c5/0x710 [mlx5_core] [] mlx5_eswitch_enable_locked+0x1bb/0x290 [mlx5_core] [] mlx5_devlink_eswitch_mode_set+0x14f/0x320 [mlx5_core] [] devlink_nl_cmd_eswitch_set_doit+0x94/0x120 [] genl_family_rcv_msg_doit.isra.17+0x113/0x150 [] genl_family_rcv_msg+0xb7/0x170 [] ? devlink_nl_cmd_port_split_doit+0x100/0x100 [] genl_rcv_msg+0x47/0xa0 [] ? genl_family_rcv_msg+0x170/0x170 [] netlink_rcv_skb+0x4c/0x130 [] genl_rcv+0x24/0x40 [] netlink_unicast+0x19a/0x230 [] netlink_sendmsg+0x204/0x3d0 [] sock_sendmsg+0x50/0x60 Fixes: 90b22b9bcd24 ("net/mlx5e: Disable Rx ntuple offload for uplink representor") Signed-off-by: Amir Tzin <[email protected]> Reviewed-by: Aya Levin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5e: Don't hold encap tbl lock if there is no encap actionChris Mi2-6/+18
The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9fa7ccf ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5: Honor user input for migratable port fn attrShay Drory1-1/+1
Currently, whenever a user is setting migratable port fn attr, the driver is always turn migratable capability on. Fix it by honor the user input Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer()Yuanjun Gong1-1/+3
mlx5e_ipsec_remove_trailer() should return an error code if function pskb_trim() returns an unexpected value. Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by: Yuanjun Gong <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5: fix potential memory leak in mlx5e_init_rep_rxZhengchao Shao1-1/+2
The memory pointed to by the priv->rx_res pointer is not freed in the error path of mlx5e_init_rep_rx, which can lead to a memory leak. Fix by freeing the memory in the error path, thereby making the error path identical to mlx5e_cleanup_rep_rx(). Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctxZhengchao Shao1-2/+3
when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory pointed by 'in' is not released, which will cause memory leak. Move memory release after mlx5_cmd_exec. Fixes: 1d9186476e12 ("net/mlx5: DR, Add direct rule command utilities") Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groupsZhengchao Shao1-0/+1
In function macsec_fs_tx_create_crypto_table_groups(), when the ft->g memory is successfully allocated but the 'in' memory fails to be allocated, the memory pointed to by ft->g is released once. And in function macsec_fs_tx_create(), macsec_fs_tx_destroy() is called to release the memory pointed to by ft->g again. This will cause double free problem. Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules") Signed-off-by: Zhengchao Shao <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-07-26Merge tag 'clk-meson-fixes-v6.5-1' of https://github.com/BayLibre/clk-meson ↵Stephen Boyd1-2/+2
into clk-fixes Pull an Amlogic clk driver fix from Jerome Brunet: - Fix PLL scheduling while atomic following a1 locking sequence update * tag 'clk-meson-fixes-v6.5-1' of https://github.com/BayLibre/clk-meson: clk: meson: change usleep_range() to udelay() for atomic context
2023-07-26Merge tag 'platform-drivers-x86-v6.5-3' of ↵Linus Torvalds12-40/+173
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Misc small fixes and hw-id additions" * tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: huawei-wmi: Silence ambient light sensor platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100 platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops platform/x86: think-lmi: Use kfree_sensitive instead of kfree platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks platform/x86: intel: hid: Always call BTNL ACPI method platform/x86/amd/pmf: Notify OS power slider update platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551 platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed() platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet
2023-07-26drm/msm: Disallow submit with fence id 0Rob Clark1-1/+1
A fence id of zero is expected to be invalid, and is not removed from the fence_idr table. If userspace is requesting to specify the fence id with the FENCE_SN_IN flag, we need to reject a zero fence id value. Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN") Signed-off-by: Rob Clark <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/549180/
2023-07-26rbd: retrieve and check lock owner twice before blocklistingIlya Dryomov1-2/+23
An attempt to acquire exclusive lock can race with the current lock owner closing the image: 1. lock is held by client123, rbd_lock() returns -EBUSY 2. get_lock_owner_info() returns client123 instance details 3. client123 closes the image, lock is released 4. find_watcher() returns 0 as there is no matching watcher anymore 5. client123 instance gets erroneously blocklisted Particularly impacted is mirror snapshot scheduler in snapshot-based mirroring since it happens to open and close images a lot (images are opened only for as long as it takes to take the next mirror snapshot, the same client instance is used for all images). To reduce the potential for erroneous blocklisting, retrieve the lock owner again after find_watcher() returns 0. If it's still there, make sure it matches the previously detected lock owner. Cc: [email protected] # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL Cc: [email protected] # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit Cc: [email protected] Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Dongsheng Yang <[email protected]>
2023-07-26rbd: harden get_lock_owner_info() a bitIlya Dryomov1-6/+15
- we want the exclusive lock type, so test for it directly - use sscanf() to actually parse the lock cookie and avoid admitting invalid handles - bail if locker has a blank address Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Dongsheng Yang <[email protected]>
2023-07-26rbd: make get_lock_owner_info() return a single locker or NULLIlya Dryomov1-33/+51
Make the "num_lockers can be only 0 or 1" assumption explicit and simplify the API by getting rid of output parameters in preparation for calling get_lock_owner_info() twice before blocklisting. Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Dongsheng Yang <[email protected]>
2023-07-26RDMA/irdma: Report correct WC errorSindhu Devale1-0/+1
Report the correct WC error if a MW bind is performed on an already valid/bound window. Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions") Signed-off-by: Sindhu Devale <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]>
2023-07-26RDMA/irdma: Fix op_type reporting in CQEsSindhu Devale1-1/+1
The op_type field CQ poll info structure is incorrectly filled in with the queue type as opposed to the op_type received in the CQEs. The wrong opcode could be decoded and returned to the ULP. Copy the op_type field received in the CQE in the CQ poll info structure. Fixes: 24419777e943 ("RDMA/irdma: Fix RQ completion opcode") Signed-off-by: Sindhu Devale <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]>
2023-07-26spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized readsDouglas Anderson1-0/+25
In the patch ("spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes") we detect reads that we can't handle properly and fallback to PIO mode. While that's correct behavior, we can do better by adding "spi_controller_mem_ops" for our controller. Once we do this then the caller will give us a transfer that's a multiple of 4-bytes so we can DMA. Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support") Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Vijaya Krishna Nivarthi <[email protected]> Link: https://lore.kernel.org/r/20230725110226.2.Id4a39804e01e4a06dae9b73fd2a5194c4c7ea453@changeid Signed-off-by: Mark Brown <[email protected]>
2023-07-26spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytesDouglas Anderson1-0/+12
The Qualcomm QSPI driver appears to require that any reads using DMA are a mutliple of 4 bytes. If this isn't true then the controller will clobber any extra bytes in memory following the last word. Let's detect this and falback to PIO. This fixes problems reported by slub_debug=FZPUA, which would complain about "kmalloc Redzone overwritten". One such instance said: 0xffffff80c29d541a-0xffffff80c29d541b @offset=21530. First byte 0x0 instead of 0xcc Allocated in mtd_kmalloc_up_to+0x98/0xac age=36 cpu=3 pid=6658 Tracing through what was happening I saw that, while we often did DMA tranfers of 0x1000 bytes, sometimes we'd end up doing ones of 0x41a bytes. Those 0x41a byte transfers were the problem. NOTE: a future change will enable the SPI "mem ops" to help avoid this case, but it still seems good to add the extra check in the transfer. Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support") Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Vijaya Krishna Nivarthi <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/20230725110226.1.Ia2f980fc7cd0b831e633391f0bb1272914d8f381@changeid Signed-off-by: Mark Brown <[email protected]>
2023-07-26igc: Fix Kernel Panic during ndo_tx_timeout callbackMuhammad Husaini Zulkifli1-12/+28
The Xeon validation group has been carrying out some loaded tests with various HW configurations, and they have seen some transmit queue time out happening during the test. This will cause the reset adapter function to be called by igc_tx_timeout(). Similar race conditions may arise when the interface is being brought down and up in igc_reinit_locked(), an interrupt being generated, and igc_clean_tx_irq() being called to complete the TX. When the igc_tx_timeout() function is invoked, this patch will turn off all TX ring HW queues during igc_down() process. TX ring HW queues will be activated again during the igc_configure_tx_ring() process when performing the igc_up() procedure later. This patch also moved existing igc_disable_tx_ring_hw() to avoid using forward declaration. Kernel trace: [ 7678.747813] ------------[ cut here ]------------ [ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out [ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0 [ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0 [ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c 89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e 89 c0 48 0f a3 05 0a c1 [ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282 [ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000 [ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880 [ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb [ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000 [ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18 [ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8 [ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 7679.379370] PKRU: 55555554 [ 7679.386446] Call Trace: [ 7679.393152] <TASK> [ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10 [ 7679.407870] call_timer_fn+0x31/0x110 [ 7679.415698] expire_timers+0xb2/0x120 [ 7679.423403] run_timer_softirq+0x179/0x1e0 [ 7679.431532] ? __schedule+0x2b1/0x820 [ 7679.439078] __do_softirq+0xd1/0x295 [ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 7679.454867] run_ksoftirqd+0x22/0x30 [ 7679.462058] smpboot_thread_fn+0xb7/0x160 [ 7679.469670] kthread+0xcd/0xf0 [ 7679.476097] ? __pfx_kthread+0x10/0x10 [ 7679.483211] ret_from_fork+0x29/0x50 [ 7679.490047] </TASK> [ 7679.495204] ---[ end trace 0000000000000000 ]--- [ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump [ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value [ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641 [ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683 [ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040 [ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800 [ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081 [ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022 [ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031 [ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030 [ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808 [ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000 [ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa [ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000 [ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108 [ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter [ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 8086.945561] ------------[ cut here ]------------ Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0 Oops: (null) due to oops @ 0xffffffff81573888 RIP: 0010:dql_completed+0x148/0x160 Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? igc_poll+0x1a9/0x14d0 [igc] __napi_poll+0x2e/0x1b0 net_rx_action+0x126/0x250 __do_softirq+0xd1/0x295 irq_exit_rcu+0xc5/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 cpuidle_enter+0x2e/0x50 call_cpuidle+0x23/0x40 do_idle+0x1be/0x220 cpu_startup_entry+0x20/0x30 rest_init+0xb5/0xc0 arch_call_rest_init+0xe/0x30 start_kernel+0x448/0x760 x86_64_start_kernel+0x109/0x150 secondary_startup_64_no_verify+0xe0/0xeb </TASK> more> [0]kdb> [0]kdb> [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, type go a second time if you really want to continue [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, attempting to continue [ 8086.955689] refcount_t: underflow; use-after-free. [ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110 [ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.955751] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110 [ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81 48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d 42 c6 eb 00 00 0f 85 59 ff ff ff 48 [ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286 [ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888 [ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880 [ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28 [ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000 [ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00 [ 8086.955798] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955800] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955804] PKRU: 55555554 [ 8086.955805] Call Trace: [ 8086.955806] <IRQ> [ 8086.955808] tcp_wfree+0x112/0x130 [ 8086.955814] skb_release_head_state+0x24/0xa0 [ 8086.955818] napi_consume_skb+0x9c/0x160 [ 8086.955821] igc_poll+0x5d8/0x14d0 [igc] [ 8086.955835] __napi_poll+0x2e/0x1b0 [ 8086.955839] net_rx_action+0x126/0x250 [ 8086.955843] __do_softirq+0xd1/0x295 [ 8086.955846] irq_exit_rcu+0xc5/0xf0 [ 8086.955851] common_interrupt+0x86/0xa0 [ 8086.955857] </IRQ> [ 8086.955857] <TASK> [ 8086.955858] asm_common_interrupt+0x27/0x40 [ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955875] cpuidle_enter+0x2e/0x50 [ 8086.955880] call_cpuidle+0x23/0x40 [ 8086.955884] do_idle+0x1be/0x220 [ 8086.955887] cpu_startup_entry+0x20/0x30 [ 8086.955889] rest_init+0xb5/0xc0 [ 8086.955892] arch_call_rest_init+0xe/0x30 [ 8086.955895] start_kernel+0x448/0x760 [ 8086.955898] x86_64_start_kernel+0x109/0x150 [ 8086.955900] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955904] </TASK> [ 8086.955904] ---[ end trace 0000000000000000 ]--- [ 8086.955912] ------------[ cut here ]------------ [ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27! [ 8086.955918] invalid opcode: 0000 [#1] SMP [ 8086.955922] RIP: 0010:dql_completed+0x148/0x160 [ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc [ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 [ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 [ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 [ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 [ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 [ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 [ 8086.955933] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955938] PKRU: 55555554 [ 8086.955939] Call Trace: [ 8086.955939] <IRQ> [ 8086.955940] ? igc_poll+0x1a9/0x14d0 [igc] [ 8086.955949] __napi_poll+0x2e/0x1b0 [ 8086.955952] net_rx_action+0x126/0x250 [ 8086.955956] __do_softirq+0xd1/0x295 [ 8086.955958] irq_exit_rcu+0xc5/0xf0 [ 8086.955961] common_interrupt+0x86/0xa0 [ 8086.955964] </IRQ> [ 8086.955965] <TASK> [ 8086.955965] asm_common_interrupt+0x27/0x40 [ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955978] cpuidle_enter+0x2e/0x50 [ 8086.955981] call_cpuidle+0x23/0x40 [ 8086.955984] do_idle+0x1be/0x220 [ 8086.955985] cpu_startup_entry+0x20/0x30 [ 8086.955987] rest_init+0xb5/0xc0 [ 8086.955990] arch_call_rest_init+0xe/0x30 [ 8086.955992] start_kernel+0x448/0x760 [ 8086.955994] x86_64_start_kernel+0x109/0x150 [ 8086.955996] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955998] </TASK> [ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.956029] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs [16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs [16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs [16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs [16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs [16762.543784] ---[ end trace 0000000000000000 ]--- [16762.849099] RIP: 0010:dql_completed+0x148/0x160 PANIC: Fatal exception in interrupt Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support") Tested-by: Alejandra Victoria Alcaraz <[email protected]> Signed-off-by: Muhammad Husaini Zulkifli <[email protected]> Acked-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.