| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'asoc/topic/hisilicon', 'asoc/topic/iio' and 'asoc/topic/max98373' into asoc-next
|
|
In case of error, the function devm_iio_device_alloc() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Building with CONFIG_OF disabled produces a compiler warning:
drivers/iio/adc/stm32-dfsdm-core.c: In function 'stm32_dfsdm_probe':
drivers/iio/adc/stm32-dfsdm-core.c:245:22: error: unused variable 'pnode' [-Werror=unused-variable]
This removes the variable and open-codes it in the only place
it gets used to avoid that warning.
Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Signed-off-by: Fengguang Wu <[email protected]>
Acked-by: Arnaud Pouliquen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Add iio consumer API to set buffer size and watermark according
to sysfs API.
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
This code offers a way to handle PDM audio microphones in
ASOC framework. Audio driver should use consumer API.
A specific management is implemented for DMA, with a
callback, to allows to handle audio buffers efficiently.
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Add DFSDM driver to handle sigma delta ADC.
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Add driver for stm32 DFSDM pheripheral. Its converts a sigma delta
stream in n bit samples through a low pass filter and an integrator.
stm32-dfsdm-core driver is the core part supporting the filter
instances dedicated to sigma-delta ADC or audio PDM microphone purpose.
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Add generic driver to support sigma delta modulators.
Typically, this device is hardware connected to
an IIO device in charge of the conversion. Devices are
bonded through the hardware consumer API.
Signed-off-by: Arnaud Pouliquen <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Extend the inkern API with functions for reading and writing
attribute of iio channels.
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Add devm_iio_hw_consumer_alloc function that calls iio_hw_consumer_free
when the device is unbound from the bus.
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Hardware consumer interface can be used when one IIO device has
a direct connection to another device in hardware.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Many small fixes to show the real physical addresses of devices
instead of hashed addresses.
- One important fix to unbreak 32-bit SMP support: We forgot to 16-byte
align the spinlocks in the assembler code.
- Qemu support: The host will get a chance to sleep when the parisc
guest is idle. We use the same mechanism as the power architecture by
overlaying the "or %r10,%r10,%r10" instruction which is simply a nop
on real hardware.
* 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: qemu idle sleep support
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
parisc: Show unhashed EISA EEPROM address
parisc: Show unhashed HPA of Dino chip
parisc: Show initial kernel memory layout unhashed
parisc: Show unhashed hardware inventory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fix from Jacek Anaszewski:
"The commit 2b83ff96f51d for 4.15-rc6, which was fixing LED brightness
setting after clearing delay_off broke the behavior on any alteration
of delay_on{off} properties, due to use of a LED core helper that does
too much for this particular case"
* tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: core: Fix regression caused by commit 2b83ff96f51d
|
|
Pull MTD bugfix from Richard Weinberger:
"A single fix for the pxa3xx NAND driver"
* tag 'for-linus-20180107' of git://git.infradead.org/linux-mtd:
mtd: nand: pxa3xx: Fix READOOB implementation
|
|
Commit 2b83ff96f51d ("led: core: Fix brightness setting when setting delay_off=0")
replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink()
in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as
zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev.
Cleansing of the latter ones wasn't required to fix the original issue but
wasn't considered harmful. It nonetheless turned out to be so in case when
pointer to one or both props is passed to led_blink_set() like in the
ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or
delay_off arguments to led_blink_setup(), which results either in stopping
the software blinking or setting blinking frequency always to 1Hz.
Avoid using led_stop_software_blink() and add a single call required
to clear LED_BLINK_SW flag, which was the only needed modification to
fix the original issue.
Fixes 2b83ff96f51d ("led: core: Fix brightness setting when setting delay_off=0")
Signed-off-by: Jacek Anaszewski <[email protected]>
|
|
In the current driver, OOB bytes are accessed in raw mode, and when a
page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the
driver must read the whole spare area (64 bytes in case of a 2k page,
16 bytes for a 512 page). The driver was only reading the free OOB
bytes, which was leaving some unread data in the FIFO and was somehow
leading to a timeout.
We could patch the driver to read ->spare_size + ->ecc_size instead of
just ->spare_size when READOOB is requested, but we'd better make
in-band and OOB accesses consistent.
Since the driver is always accessing in-band data in non-raw mode (with
the ECC engine enabled), we should also access OOB data in this mode.
That's particularly useful when using the BCH engine because in this
mode the free OOB bytes are also ECC protected.
Fixes: 43bcfd2bb24a ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support")
Cc: [email protected]
Reported-by: Sean Nyekjær <[email protected]>
Tested-by: Willy Tarreau <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Acked-by: Ezequiel Garcia <[email protected]>
Tested-by: Sean Nyekjaer <[email protected]>
Acked-by: Robert Jarzmik <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a few driver fixups, nothing exciting"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xen-kbdfront - do not advertise multi-touch pressure support
Input: hideep - fix compile error due to missing include file
Input: elants_i2c - do not clobber interrupt trigger on x86
Input: joystick/analog - riscv has get_cycles()
Input: elantech - add new icbody type 15
Input: ims-pcu - fix typo in the error message
|
|
Pull IOMMU fixes from Alex Williamson:
"Fixes via Will Deacon for arm-smmu-v3.
- Fix duplicate Stream ID handling in arm-smmu-v3
- Fix arm-smmu-v3 page table ops double free"
* tag 'iommu-v4.15-rc7' of git://github.com/awilliam/linux-vfio:
iommu/arm-smmu-v3: Cope with duplicated Stream IDs
iommu/arm-smmu-v3: Don't free page table ops twice
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
"Late bugfix to plug a leak in rtsx_pcr"
* tag 'mfd-fixes-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: rtsx: Release IRQ during shutdown
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Thomas Gleixner:
- A fix for a add_efi_memmap parameter regression which ensures that
the parameter is parsed before it is used.
- Reinstate the virtual capsule mapping as the cached copy turned out
to break Quark and other things
- Remove Matt Fleming as EFI co-maintainer. He stepped back a few days
ago. Thanks Matt for all your great work!
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove Matt Fleming as EFI co-maintainer
efi/capsule-loader: Reinstate virtual capsule mapping
x86/efi: Fix kernel param add_efi_memmap regression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Four bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix wrongly assigned configuration data
s390: fix preemption race in disable_sacf_uaccess
s390/sclp: disable FORTIFY_SOURCE for early sclp code
s390/pci: handle insufficient resources during dma tlb flush
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"One minor fix adjusting the kmalloc flags in the new pvcalls driver
added in rc1"
* tag 'for-linus-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: use GFP_ATOMIC under spin lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- racy use of ctx->rcvused in af_alg
- algif_aead crash in chacha20poly1305
- freeing bogus pointer in pcrypt
- build error on MIPS in mpi
- memory leak in inside-secure
- memory overwrite in inside-secure
- NULL pointer dereference in inside-secure
- state corruption in inside-secure
- build error without CRYPTO_GF128MUL in chelsio
- use after free in n2"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: inside-secure - do not use areq->result for partial results
crypto: inside-secure - fix request allocations in invalidation path
crypto: inside-secure - free requests even if their handling failed
crypto: inside-secure - per request invalidation
lib/mpi: Fix umul_ppmm() for MIPS64r6
crypto: pcrypt - fix freeing pcrypt instances
crypto: n2 - cure use after free
crypto: af_alg - Fix race around ctx->rcvused by making it atomic_t
crypto: chacha20poly1305 - validate the digest size
crypto: chelsio - select CRYPTO_GF128MUL
|
|
'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown")' revealed a resource leak in rtsx_pci driver during shutdown.
Issue shows up as a warning during shutdown as follows:
remove_proc_entry: removing non-empty directory 'irq/17', leaking at least
'rtsx_pci'
WARNING: CPU: 0 PID: 1578 at fs/proc/generic.c:572
remove_proc_entry+0x11d/0x130
Modules linked in <long list but none that are out-of-tree>
...
Call Trace:
unregister_irq_proc
free_desc
irq_free_descs
mp_unmap_irq
acpi_unregister_gsi_apic
acpi_pci_irq_disable
do_pci_disable_device
pci_disable_device
device_shutdown
kernel_restart
Sys_reboot
Even though rtsx_pci driver implements a shutdown callback, it is not
releasing the interrupt that it registered during probe. This is causing
the ACPI layer to complain that the shared IRQ is in use while freeing
IRQ.
This code releases the IRQ to prevent resource leak and eliminate the
warning.
Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198141
Reported-by: Chris Clayton <[email protected]>
Signed-off-by: Sinan Kaya <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just collecting some fixes to finish my hoildays :-).
A few fixes for i915 (one documentation build fix), one ttm fix, one
AMD display fix, one omapdrm fix, and a set of armada fixes from
Russell.
All seem pretty small, you can now return to your latest security news
site"
* tag 'drm-fixes-for-v4.15-rc7' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
drm/ttm: check the return value of kzalloc
drm/amd/display: call set csc_default if enable adjustment is false
docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c
omapdrm/dss/hdmi4_cec: fix interrupt handling
documentation/gpu/i915: fix docs build error after file rename
drm/i915: Put all non-blocking modesets onto an ordered wq
drm/i915: Disable DC states around GMBUS on GLK
drm/i915/psr: Fix register name mess up.
drm/armada: fix YUV planar format framebuffer offsets
drm/armada: improve efficiency of armada_drm_plane_calc_addrs()
drm/armada: fix UV swap code
drm/armada: fix SRAM powerdown
drm/armada: fix leak of crtc structure
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v4.15-rc7
- couple of documentation build fixes
- serialize non-blocking modesets
- prevent DMC from messing up GMBUS transfers
- PSR regression fix
* tag 'drm-intel-fixes-2018-01-04' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c
documentation/gpu/i915: fix docs build error after file rename
drm/i915: Put all non-blocking modesets onto an ordered wq
drm/i915: Disable DC states around GMBUS on GLK
drm/i915/psr: Fix register name mess up.
|
|
into drm-fixes
- backport of a DC change which fixes a greenish tint on some RV hw
- properly handle kzalloc fail in ttm
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: check the return value of kzalloc
drm/amd/display: call set csc_default if enable adjustment is false
|
|
git://git.armlinux.org.uk/~rmk/linux-arm into drm-fixes
Armada fixes.
* 'drm-armada-fixes-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm:
drm/armada: fix YUV planar format framebuffer offsets
drm/armada: improve efficiency of armada_drm_plane_calc_addrs()
drm/armada: fix UV swap code
drm/armada: fix SRAM powerdown
drm/armada: fix leak of crtc structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes
omapdrm fixes for 4.15
* Fix OMAP4 HDMI CEC interrupt handling and a possible buffer overflow
* tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
omapdrm/dss/hdmi4_cec: fix interrupt handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Fixes this time include mostly device tree changes, as usual, the
notable ones include:
- A number of patches to fix most of the remaining DTC warnings that
got introduced when DTC started warning about some obvious
mistakes. We still have some remaining warnings that probably may
have to wait until 4.16 to get fixed while we try to figure out
what the correct contents should be.
- On Allwinner A64, Ethernet PHYs need a fix after a mistake in
coordination between patches merged through multiple branches.
- Various fixes for PMICs on allwinner based boards
- Two fixes for ethernet link detection on some Renesas machines
- Two stability fixes for rockchip based boards
Aside from device-tree, two other areas got fixes for older problems:
- For TI Davinci DM365, a couple of fixes were needed to repair the
MMC DMA engine support, apparently this has been broken for a
while.
- One important fix for all Allwinner chips with the PMIC driver as a
loadable module"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
arm64: dts: uniphier: fix gpio-ranges property of PXs3 SoC
arm64: dts: renesas: ulcb: Remove renesas, no-ether-link property
arm64: dts: renesas: salvator-x: Remove renesas, no-ether-link property
ARM: dts: tango4: remove bogus interrupt-controller property
ARM: dts: ls1021a: fix incorrect clock references
ARM: dts: aspeed-g4: Correct VUART IRQ number
ARM: dts: exynos: Enable Mixer node for Exynos5800 Peach Pi machine
ARM: dts: sun8i: a711: Reinstate the PMIC compatible
ARM: davinci: fix mmc entries in dm365's dma_slave_map
ARM: dts: da850-lego-ev3: Fix battery voltage gpio
ARM: davinci: Add dma_mask to dm365's eDMA device
ARM: davinci: Use platform_device_register_full() to create pdev for dm365's eDMA
arm64: dts: rockchip: limit rk3328-rock64 gmac speed to 100MBit for now
arm64: dts: rockchip: remove vdd_log from rk3399-puma
arm64: dts: orange-pi-zero-plus2: fix sdcard detect
arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3
ARM: dts: sunxi: Convert to CCU index macros for HDMI controller
sunxi-rsb: Include OF based modalias in device uevent
ARM: dts: at91: disable the nxp,se97b SMBUS timeout on the TSE-850
arm64: dts: rockchip: fix trailing 0 in rk3328 tsadc interrupts
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Pull "Allwinner fixes for 4.15" from Chen-Yu Tsai:
First, one fix that adds proper regulator references for the EMAC
external PHYs on A64 boards. The EMAC bindings were developed for 4.13,
but reverted at the last minute. They were finalized and brought back
for 4.15. However in the time between, regulator support for the A64
boards was merged. When EMAC device tree changes were reintroduced,
this was not taken into account.
Second, a patch that adds OF based modalias uevent for RSB slave devices.
This has been missing since the introduction of RSB, and recently with
PMIC regulator support introduced for the A64, has been seen affecting
distributions, which have the all-important PMIC mfd drivers built as
modules, which then don't get loaded.
Other minor cleanups include final conversion of raw indices to CCU
binding macros for sun[4567]i HDMI, cleanup of dummy regulators on the
A64 SOPINE, a SD card detection polarity fix for the Orange Pi Zero
Plus2, and adding a missing compatible for the PMIC on the TBS A711
tablet.
* tag 'sunxi-fixes-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a711: Reinstate the PMIC compatible
arm64: dts: orange-pi-zero-plus2: fix sdcard detect
arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3
ARM: dts: sunxi: Convert to CCU index macros for HDMI controller
sunxi-rsb: Include OF based modalias in device uevent
arm64: allwinner: a64: add Ethernet PHY regulator for several boards
|
|
Display WA #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
enabling or in previous enabling."
This workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly, although
they were expecting the DPLL0 link rate to be unchanged on
runtime.
We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency with small
differences.
This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.
Cc: Arthur J Runyan <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: [email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 53421c2fe99ce16838639ad89d772d914a119a49)
[ Lucas: Backport to 4.15 adding back variable that has been removed on
commits not meant to be backported ]
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit:
82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header")
... refactored the capsule loading code that maps the capsule header,
to avoid having to map it several times.
However, as it turns out, the vmap() call we ended up removing did not
just map the header, but the entire capsule image, and dropping this
virtual mapping breaks capsules that are processed by the firmware
immediately (i.e., without a reboot).
Unfortunately, that change was part of a larger refactor that allowed
a quirk to be implemented for Quark, which has a non-standard memory
layout for capsules, and we have slightly painted ourselves into a
corner by allowing quirk code to mangle the capsule header and memory
layout.
So we need to fix this without breaking Quark. Fortunately, Quark does
not appear to care about the virtual mapping, and so we can simply
do a partial revert of commit:
2a457fb31df6 ("efi/capsule-loader: Use page addresses rather than struct page pointers")
... and create a vmap() mapping of the entire capsule (including header)
based on the reinstated struct page array, unless running on Quark, in
which case we pass the capsule header copy as before.
Reported-by: Ge Song <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Tested-by: Ge Song <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Cc: <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Helge Deller <[email protected]>
|
|
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
Signed-off-by: Helge Deller <[email protected]>
|
|
In the function ttm_page_alloc_init, kzalloc call is made for variable
_manager, we need to check its return value, it may return NULL.
Signed-off-by: Xiongwei Song <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes a greenish tint on RV displays.
Signed-off-by: Yue Hin Lau <[email protected]>
Reviewed-by: Eric Bernstein <[email protected]>
Acked-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
[[email protected]: backport to 4.15]
Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Some user-space applications expect multi-touch pressure
on contact to be reported if it is advertised in device
properties. Otherwise, such applications may treat reports
not as actual touches, but hovering. Currently this is
only advertised, but not reported.
Fix this by not advertising that ABS_MT_PRESSURE is supported.
Signed-off-by: Oleksandr Andrushchenko <[email protected]>
Signed-off-by: Andrii Chepurnyi <[email protected]>
Patchwork-Id: 10140017
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
For PCI devices behind an aliasing PCIe-to-PCI/X bridge, the bridge
alias to DevFn 0.0 on the subordinate bus may match the original RID of
the device, resulting in the same SID being present in the device's
fwspec twice. This causes trouble later in arm_smmu_write_strtab_ent()
when we wind up visiting the STE a second time and find it already live.
Avoid the issue by giving arm_smmu_install_ste_for_dev() the cleverness
to skip over duplicates. It seems mildly counterintuitive compared to
preventing the duplicates from existing in the first place, but since
the DT and ACPI probe paths build their fwspecs differently, this is
actually the cleanest and most self-contained way to deal with it.
Cc: <[email protected]>
Fixes: 8f78515425da ("iommu/arm-smmu: Implement of_xlate() for SMMUv3")
Reported-by: Tomasz Nowicki <[email protected]>
Tested-by: Tomasz Nowicki <[email protected]>
Tested-by: Jayachandran C. <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Kasan reports a double free when finalise_stage_fn fails: the io_pgtable
ops are freed by arm_smmu_domain_finalise and then again by
arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure.
Cc: <[email protected]>
Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reviewed-by: Robin Murphy <[email protected]>
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
A spin lock is taken here so we should use GFP_ATOMIC.
Fixes: 9774c6cca266 ("xen/pvcalls: implement accept command")
Signed-off-by: Wei Yongjun <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
We store per path and per device configuration data to identify the
path or device correctly. The per path configuration data might get
mixed up if the original request gets into error recovery and is
started with a random path mask.
This would lead to a wrong identification of a path in case of a CUIR
event for example.
Fix by copying the path mask from the original request to the error
recovery request in case it is a path verification request.
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
The omap4 CEC hardware cannot tell a Nack from a Low Drive from an
Arbitration Lost error, so just report a Nack, which is almost
certainly the reason for the error anyway.
This also simplifies the implementation. The only three interrupts
that need to be enabled are:
Transmit Buffer Full/Empty Change event: triggered when the
transmit finished successfully and cleared the buffer.
Receiver FIFO Not Empty event: triggered when a message was received.
Frame Retransmit Count Exceeded event: triggered when a transmit
failed repeatedly, usually due to the message being Nacked. Other
reasons are possible (Low Drive, Arbitration Lost) but there is no
way to know. If this happens the TX buffer needs to be cleared
manually.
While testing various error conditions I noticed that the hardware
can receive messages up to 18 bytes in total, which exceeds the legal
maximum of 16. This could cause a buffer overflow, so we check for
this and constrain the size to 16 bytes.
The old incorrect interrupt handler could cause the CEC framework to
enter into a bad state because it mis-detected the "Start Bit Irregularity
event" as an ARB_LOST transmit error when it actually is a receive error
which should be ignored.
Signed-off-by: Hans Verkuil <[email protected]>
Reported-by: Henrik Austad <[email protected]>
Tested-by: Henrik Austad <[email protected]>
Tested-by: Hans Verkuil <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
|
|
We have plenty of global registers and whatnot programmed without
any further locking by the modeset code. Currently non-bocking
modesets are allowed to execute in parallel which could corrupt
said registers.
To avoid the problem let's run all non-blocking modesets on an
ordered workqueue. We still put page flips etc. to system_unbound_wq
allowing page flips on one pipe to execute in parallel with page flips
or a modeset on a another pipe (assuming no known state is shared
between them, at which point they would have been added to the same
atomic commit and serialized that way).
Blocking modesets are already serialized with each other by
connection_mutex, and thus are safe. To serialize them with
non-blocking modesets we just flush the workqueue before executing
blocking modesets.
Cc: Daniel Vetter <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Fixes: 94f050246b42 ("drm/i915: nonblocking commit")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Daniel Vetter <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
(cherry picked from commit 757fffcfdffb6c0dd46c1b264091c36b4e5a86ae)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Prevent the DMC from destroying GMBUS transfers on GLK. GMBUS
lives in PG1 so DC off is all we need.
Cc: [email protected]
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Dhinakaran Pandiyan <[email protected]>
(cherry picked from commit 156961ae7bdf6feb72778e8da83d321b273343fd)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Commit 77affa31722b ("drm/i915/psr: Fix compiler warnings for
hsw_psr_disable()") swapped status and control registers while fixing
indentation. The _ctl at the end of the status register name must have to
led to this.
Fixes: 77affa31722b ("drm/i915/psr: Fix compiler warnings for hsw_psr_disable()")
References: https://www.mrc-cbu.cam.ac.uk/people/matt.davis/cmabridge/
Cc: Chris Wilson <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Dhinakaran Pandiyan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
(cherry picked from commit 14c6547d6df641d3e41fa4f4164f6e267ebfab89)
Signed-off-by: Jani Nikula <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A couple of fixlets for x86:
- Fix the ESPFIX double fault handling for 5-level pagetables
- Fix the commandline parsing for 'apic=' on 32bit systems and update
documentation
- Make zombie stack traces reliable
- Fix kexec with stack canary
- Fix the delivery mode for APICs which was missed when the x86
vector management was converted to single target delivery. Caused a
regression due to the broken hardware which ignores affinity
settings in lowest prio delivery mode.
- Unbreak modules when AMD memory encryption is enabled
- Remove an unused parameter of prepare_switch_to"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Switch all APICs to Fixed delivery mode
x86/apic: Update the 'apic=' description of setting APIC driver
x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case
x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)
x86: Remove unused parameter of prepare_switch_to
x86/stacktrace: Make zombie stack traces reliable
x86/mm: Unbreak modules that use the DMA API
x86/build: Make isoimage work on Debian
x86/espfix/64: Fix espfix double-fault handling on 5-level systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A rather large update after the kaisered maintainer finally found time
to handle regression reports.
- The larger part addresses a regression caused by the x86 vector
management rework.
The reservation based model does not work reliably for MSI
interrupts, if they cannot be masked (yes, yet another hw
engineering trainwreck). The reason is that the reservation mode
assigns a dummy vector when the interrupt is allocated and switches
to a real vector when the interrupt is requested.
If the MSI entry cannot be masked then the initialization might
raise an interrupt before the interrupt is requested, which ends up
as spurious interrupt and causes device malfunction and worse. The
fix is to exclude MSI interrupts which do not support masking from
reservation mode and assign a real vector right away.
- Extend the extra lockdep class setup for nested interrupts with a
class for the recently added irq_desc::request_mutex so lockdep can
differeniate and does not emit false positive warnings.
- A ratelimit guard for the bad irq printout so in case a bad irq
comes back immediately the system does not drown in dmesg spam"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI
genirq/irqdomain: Rename early argument of irq_domain_activate_irq()
x86/vector: Use IRQD_CAN_RESERVE flag
genirq: Introduce IRQD_CAN_RESERVE flag
genirq/msi: Handle reactivation only on success
gpio: brcmstb: Make really use of the new lockdep class
genirq: Guard handle_bad_irq log messages
kernel/irq: Extend lockdep class for request mutex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are six small fixes of some of the char/misc drivers that have
been sent in to resolve reported issues.
Nothing major, a binder use-after-free fix, some thunderbolt bugfixes,
a hyper-v bugfix, and an nvmem driver fix. All of these have been in
linux-next with no reported issues for a while"
* tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: meson-mx-efuse: fix reading from an offset other than 0
binder: fix proc->files use-after-free
vmbus: unregister device_obj->channels_kset
thunderbolt: Mask ring interrupt properly when polling starts
MAINTAINERS: Add thunderbolt.rst to the Thunderbolt driver entry
thunderbolt: Make pathname to force_power shorter
|