aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-02-12i2c: i801: add helper i801_set_hstadd()Heiner Kallweit1-20/+16
Factor out setting SMBHSTADD to a helper. The current code makes the assumption that constant I2C_SMBUS_READ has bit 0 set, that's not ideal. Therefore let the new helper explicitly check for I2C_SMBUS_READ. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-12i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFERHeiner Kallweit1-0/+4
According to the datasheet the block process call requires block buffer mode. The user may disable block buffer mode by module parameter disable_features, in such a case we have to clear FEATURE_BLOCK_PROC. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-12i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQHeiner Kallweit1-5/+9
Host notification uses an interrupt, therefore it makes sense only if interrupts are enabled. Make this dependency explicit by removing FEATURE_HOST_NOTIFY if FEATURE_IRQ isn't set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-12i2c: i801: improve interrupt handlerHeiner Kallweit1-17/+8
Not sure if it can happen, but better play safe: If SMBHSTSTS_BYTE_DONE and an error flag is set, then don't trust the result and skip calling i801_isr_byte_done(). In addition clear status bit SMBHSTSTS_BYTE_DONE in the main interrupt handler, this allows to simplify the code a little. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-12i2c: st: use pm_sleep_ptr to avoid ifdef CONFIG_PM_SLEEPAlain Volmat1-7/+2
Rely on pm_sleep_ptr when setting the pm ops and get rid of the ifdef CONFIG_PM_SLEEP around suspend/resume functions. Signed-off-by: Alain Volmat <avolmat@me.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03i2c: xiic: Remove interrupt enable/disable in Rx pathRaviteja Narayanam1-5/+0
'DYNAMIC_MODE_READ_BROKEN_BIT' quirk added in the driver, effected IP versions no longer enter dynamic mode. So, remove local_irq_save/local_irq_restore APIs from driver. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03i2c: xiic: Add smbus_block_read functionalityRaviteja Narayanam1-4/+78
smbus_block_read is added to xiic driver to read from few sensors which support this command. Since the number of bytes to read is not known prior to transfer, xiic standard mode is being used for low level control of IP. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03i2c: xiic: Add wait for FIFO empty in send_txRaviteja Narayanam1-0/+7
If the tx_half_empty interrupt comes first instead of tx_empty, STOP bit is generated even before all the bytes are transmitted out on the bus. STOP bit should be sent only after all the bytes in the FIFO are transmitted out of the FIFO. So wait until FIFO is empty before sending the STOP bit. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03i2c: xiic: Switch to Xiic standard mode for i2c-readRaviteja Narayanam1-39/+57
Xilinx I2C IP has two modes of operation, both of which implement I2C transactions. The only difference from sw perspective is the programming sequence for these modes. Dynamic mode -> Simple to program, less number of steps in sequence. Standard mode -> Gives flexibility, more number of steps in sequence. In dynamic mode, during the i2c-read transactions, if there is a delay(> 200us) between the register writes (address & byte count), read transaction fails. On a system with load, this scenario is occurring frequently. To avoid this, switch to standard mode if there is a read request. Added a quirk to identify the IP version effected by this and follow the standard mode. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03i2c: xiic: Fix Rx and Tx paths in standard modeRaviteja Narayanam1-0/+53
repeated start When a combined message request comes from user space, the controller has to initiate repeated start sequence. In standard mode, this repeated start sequence is corrupted if there is still data in the Tx FIFO. So, always make sure that all the bytes are completely transmitted out of the FIFO by waiting for TXEMPTY, if the previous message is of Tx type. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-03i2c: xiic: Add standard mode support for > 255 byteRaviteja Narayanam1-41/+225
read transfers Added standard mode for AXI I2C controller to enable read transfers of size more than 255 bytes. The driver selects standard mode in the following scenarios. 1. If a single message request comes from user space, requesting a read of more than 255 bytes 2. If a message set request comes from user space consisting of many messages and if any one of them is a read operation, irrespective of the size of transfer. (This is done because it is observed that repeated start operation is not happening in dynamic mode read as expected in a message set request from user space.) Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-02i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controllerBinbin Zhou3-0/+382
This I2C module is integrated into the Loongson-2K SoCs and Loongson LS7A bridge chip. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-28i2c: designware: Change from u32 to unsigned int for regmap_read() callsShyam Sundar S K4-14/+16
regmap_read() API signature expects the caller to send "unsigned int" type to return back the read value, but there are some occurrences of 'u32' across i2c-designware-* files. Change them to match the regmap_read() signature. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-28i2c: designware: add a new bit check for IC_CON controlShyam Sundar S K2-0/+21
On some AMD platforms, based on the new designware datasheet, BIOS sets the BIT(11) within the IC_CON register to advertise the "bus clear feature capability". AMD/Designware datasheet says: Bit(11) BUS_CLEAR_FEATURE_CTRL. Read-write,Volatile. Reset: 0. Description: In Master mode: - 1'b1: Bus Clear Feature is enabled. - 1'b0: Bus Clear Feature is Disabled. In Slave mode, this register bit is not applicable. On AMD platform designs: 1. BIOS programs the BUS_CLEAR_FEATURE_CTRL and enables the detection of SCL/SDA stuck low. 2. Whenever the stuck low is detected, the SMU FW shall do the bus recovery procedure. Currently, the way in which the "master_cfg" is built in the driver, it overrides the BUS_CLEAR_FEATURE_CTRL advertised by BIOS and the SMU FW cannot initiate the bus recovery if the stuck low is detected. Hence add a check in i2c_dw_probe_master() that if the BIOS advertises the bus clear feature, let driver not ignore it and adapt accordingly. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-23i2c: gpio: support write-only sda/scl w/o pull-upHeiner Kallweit1-3/+10
There are slave devices that understand I2C but have read-only SDA and SCL. Examples are FD650 7-segment LED controller and its derivatives. Typical board designs don't even have a pull-up for both pins. Handle the new attributes for write-only SDA and missing pull-up on SDA/SCL. For either pin the open-drain and has-no-pullup properties are mutually-exclusive, what is documented in the DT property documentation. We don't add an extra warning here because the open-drain properties are marked deprecated anyway. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [wsa: switched to device properties] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-23i2c: algo: bit: allow getsda to be NULLHeiner Kallweit1-42/+35
This is in preparation of supporting write-only SDA in i2c-gpio. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: au1550: Use devm_platform_get_and_ioremap_resource()ye xingchen1-3/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: mt65xx: Use devm_platform_get_and_ioremap_resource()ye xingchen1-5/+2
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: bcm2835: Use devm_platform_get_and_ioremap_resource()ye xingchen1-3/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: aspeed: Use devm_platform_get_and_ioremap_resource()ye xingchen1-3/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: gpio: Add support on ACPI-based systemBinbin Zhou1-13/+21
Add support for the ACPI-based device registration, so that the driver can be also enabled through ACPI table. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Reviewed-by: Andy Shevchenko <andy@kernel.org> Tested-by: Peibao Liu <liupeibao@loongson.cn> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: cadence: Remove redundant expression in if clauseLars-Peter Clausen1-3/+1
In the mrecv() function the Cadence I2C driver has the following expression in an if clause. ((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) && (id->recv_count <= CDNS_I2C_FIFO_DEPTH)) Earlier in the same function when I2C_M_RECV_LEN is set the recv_count is initialized to a value that is larger than CDNS_I2C_FIFO_DEPTH. This means if the first expression is false the second expression is also false. Checking the first expression is thus redundant and can be removed. This slightly simplifies the logic. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: cadence: Remove `irq` field from driver state structLars-Peter Clausen1-10/+7
The irq field of the driver state struct is only used in the probe function. There is no need to keep it around. Remove it from the state struct and use a on-stack variable instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: cadence: Remove unused CDNS_I2C_DATA_INTR_DEPTH defineLars-Peter Clausen1-2/+0
The CDNS_I2C_DATA_INTR_DEPTH is not used in the Cadence I2C driver. Remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-20i2c: Set i2c pinctrl recovery info from it's device pinctrlHanna Hawa1-1/+4
Currently the i2c subsystem rely on the controller device tree to initialize the pinctrl recovery information, part of the drivers does not set this field (rinfo->pinctrl), for example i2c DesignWare driver. The pins information is saved part of the device structure before probe and it's done on pinctrl_bind_pins(). Make the i2c init recovery to get the device pins if it's not initialized by the driver from the device pins. Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-17i2c: dev: fix notifier return valuesBartosz Golaszewski1-8/+8
We have a set of return values that notifier callbacks can return. They should not return 0, error codes or anything other than those predefined values. Make the i2c character device's callback return NOTIFY_DONE or NOTIFY_OK depending on the situation. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-17Merge branch 'i2c/fwnode-api' into i2c/for-mergewindowWolfram Sang3-78/+99
2023-01-17i2c: add fwnode APIsRussell King (Oracle)3-78/+99
Add fwnode APIs for finding and getting I2C adapters, which will be used by the SFP code. These are passed the fwnode corresponding to the adapter, and return the I2C adapter. It is the responsibility of the caller to find the appropriate fwnode. We keep the DT and ACPI interfaces, but where appropriate, recode them to use the fwnode interfaces internally. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-09i2c: qcom-geni: change i2c_master_hub to staticYang Yingliang1-1/+1
i2c_master_hub is only used in i2c-qcom-geni.c now, change it to static. Fixes: cacd9643eca7 ("i2c: qcom-geni: add support for I2C Master Hub variant") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-09i2c: designware: fix i2c_dw_clk_rate() return size to be u32Hanna Hawa2-2/+2
Make i2c_dw_clk_rate() to return u32 instead of unsigned long, as the function return the value of get_clk_rate_khz() which returns u32. Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided") Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-09i2c: qcom-cci: Deprecate duplicated compatiblesKonrad Dybcio1-1/+7
Many compatibles have been introduced, pointing to the same config data. Leave a note reminding future developers to not do that again. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-01-07Merge tag 'devicetree-fixes-for-6.2-1' of ↵Linus Torvalds1-28/+32
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix DT memory scanning for some MIPS boards when memory is not specified in DT - Redo CONFIG_CMDLINE* handling for missing /chosen node. The first attempt broke PS3 (and possibly other PPC platforms). - Fix constraints in QCom Soundwire schema * tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2 Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node" dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports of/fdt: run soc memory setup when early_init_dt_scan_memory fails
2023-01-07Merge tag 'usb-6.2-rc3' of ↵Linus Torvalds5-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 6.2-rc3 that resolve some reported issues. They include: - of-reported ulpi problem, so the offending commit is reverted - dwc3 driver bugfixes for recent changes - fotg210 fixes Most of these have been in linux-next for a while, the last few were on the mailing list for a long time and passed all the 0-day bot testing so all should be fine with them as well" * tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: gadget: Ignore End Transfer delay on teardown usb: dwc3: xilinx: include linux/gpio/consumer.h usb: fotg210-udc: fix error return code in fotg210_udc_probe() usb: fotg210: fix OTG-only build Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
2023-01-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds3-20/+43
Pull rdma fixes from Jason Gunthorpe: "Most noticeable is that Yishai found a big data corruption regression due to a change in the scatterlist: - Do not wrongly combine non-contiguous pages in scatterlist - Fix compilation warnings on gcc 13 - Oops when using some mlx5 stats - Bad enforcement of atomic responder resources in mlx5" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: lib/scatterlist: Fix to merge contiguous pages into the last SG properly RDMA/mlx5: Fix validation of max_rd_atomic caps for DC RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device RDMA/srp: Move large values to a new enum for gcc13
2023-01-06Merge tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds26-153/+203
Pull drm fixes from Daniel Vetter: "Still not much, but more than last week. Dave should be back next week from the beaching. drivers: - i915-gvt fixes - amdgpu/kfd fixes - panfrost bo refcounting fix - meson afbc corruption fix - imx plane width fix core: - drm/sched fixes - drm/mm kunit test fix - dma-buf export error handling fixes" * tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drm: Revert "drm/amd/display: Enable Freesync Video Mode by default" drm/i915/gvt: fix double free bug in split_2MB_gtt_entry drm/i915/gvt: use atomic operations to change the vGPU status drm/i915/gvt: fix vgpu debugfs clean in remove drm/i915/gvt: fix gvt debugfs destroy drm/i915: unpin on error in intel_vgpu_shadow_mm_pin() drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0 drm/amdkfd: Fix kernel warning during topology setup drm/scheduler: Fix lockup in drm_sched_entity_kill() drm/imx: ipuv3-plane: Fix overlay plane width drm/scheduler: Fix lockup in drm_sched_entity_kill() drm/virtio: Fix memory leak in virtio_gpu_object_create() drm/meson: Reduce the FIFO lines held when AFBC is not used drm/tests: reduce drm_mm_test stack usage drm/panfrost: Fix GEM handle creation ref-counting drm/plane-helper: Add the missing declaration of drm_atomic_state dma-buf: fix dma_buf_export init order v2
2023-01-06tpm: Allow system suspend to continue when TPM suspend failsJason A. Donenfeld1-1/+3
TPM 1 is sometimes broken across system suspends, due to races or locking issues or something else that haven't been diagnosed or fixed yet, most likely having to do with concurrent reads from the TPM's hardware random number generator driver. These issues prevent the system from actually suspending, with errors like: tpm tpm0: A TPM error (28) occurred continue selftest ... tpm tpm0: A TPM error (28) occurred attempting get random ... tpm tpm0: Error (28) sending savestate before suspend tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28 tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28 tpm_tis 00:08: PM: failed to suspend: error 28 PM: Some devices failed to suspend, or early wake event detected This issue was partially fixed by 23393c646142 ("char: tpm: Protect tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took directly because the TPM maintainers weren't available. However, it seems like this just addresses the most common cases of the bug, rather than addressing it entirely. So there are more things to fix still, apparently. In lieu of actually fixing the underlying bug, just allow system suspend to continue, so that laptops still go to sleep fine. Later, this can be reverted when the real bug is fixed. Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/ Cc: stable@vger.kernel.org # 6.1+ Reported-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Luigi Semenzato <semenzato@chromium.org> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Johannes Altmanninger <aclopte@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-01-06Merge tag 'block-2023-01-06' of git://git.kernel.dk/linuxLinus Torvalds10-0/+3003
Pull block fixes from Jens Axboe: "The big change here is obviously the revert of the pktcdvd driver removal. Outside of that, just minor tweaks. In detail: - Re-instate the pktcdvd driver, which necessitates adding back bio_copy_data_iter() and the fops->devnode() hook for now (me) - Fix for splitting of a bio marked as NOWAIT, causing either nowait reads or writes to error with EAGAIN even if parts of the IO completed (me) - Fix for ublk, punting management commands to io-wq as they can all easily block for extended periods of time (Ming) - Removal of SRCU dependency for the block layer (Paul)" * tag 'block-2023-01-06' of git://git.kernel.dk/linux: block: Remove "select SRCU" Revert "pktcdvd: remove driver." Revert "block: remove devnode callback from struct block_device_operations" Revert "block: bio_copy_data_iter" ublk: honor IO_URING_F_NONBLOCK for handling control command block: don't allow splitting of a REQ_NOWAIT bio block: handle bio_split_to_limits() NULL return
2023-01-06Merge tag 'v6.2-p2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a CFI crash in arm64/sm4 as well as a regression in the caam driver" * tag 'v6.2-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/sm4 - fix possible crash with CFI enabled crypto: caam - fix CAAM io mem access in blob_gen
2023-01-06usb: dwc3: gadget: Ignore End Transfer delay on teardownThinh Nguyen1-1/+4
If we delay sending End Transfer for Setup TRB to be prepared, we need to check if the End Transfer was in preparation for a driver teardown/soft-disconnect. In those cases, just send the End Transfer command without delay. In the case of soft-disconnect, there's a very small chance the command may not go through immediately. But should it happen, the Setup TRB will be prepared during the polling of the controller halted state, allowing the command to go through then. In the case of disabling endpoint due to reconfiguration (e.g. set_interface(alt-setting) or usb reset), then it's driven by the host. Typically the host wouldn't immediately cancel the control request and send another control transfer to trigger the End Transfer command timeout. Fixes: 4db0fbb60136 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-06usb: dwc3: xilinx: include linux/gpio/consumer.hArnd Bergmann1-0/+1
The newly added gpio consumer calls cause a build failure in configurations that fail to include the right header implicitly: drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp': drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration] 207 | reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | ^~~~~~~~~~~~~~~~~~~~~~~ | devm_clk_get_optional Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-06Merge tag 'drm-intel-fixes-2023-01-05' of ↵Daniel Vetter8-48/+80
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only gvt-fixes: - debugfs fixes (Zhenyu) - fix up for vgpu status (Zhi) - double free fix in split_2MB_gtt_entry (Zheng) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y7cszBkLRvAy6uao@intel.com
2023-01-06usb: fotg210-udc: fix error return code in fotg210_udc_probe()Yang Yingliang1-0/+2
After commit 5f217ccd520f ("fotg210-udc: Support optional external PHY"), the error code is re-assigned to 0 in fotg210_udc_probe(), if allocate or map memory fails after the assignment, it can't return an error code. Set the error code to -ENOMEM to fix this problem. Fixes: 5f217ccd520f ("fotg210-udc: Support optional external PHY") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221230065427.944586-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-05Merge tag 'thermal-6.2-rc3' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Add a missing sysfs attribute to the int340x thermal driver (Srinivas Pandruvada)" * tag 'thermal-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Add missing attribute for data rate base
2023-01-05Merge tag 'net-6.2-rc3' of ↵Linus Torvalds63-345/+720
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi, and netfilter. Current release - regressions: - bpf: fix nullness propagation for reg to reg comparisons, avoid null-deref - inet: control sockets should not use current thread task_frag - bpf: always use maximal size for copy_array() - eth: bnxt_en: don't link netdev to a devlink port for VFs Current release - new code bugs: - rxrpc: fix a couple of potential use-after-frees - netfilter: conntrack: fix IPv6 exthdr error check - wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes - eth: dsa: qca8k: various fixes for the in-band register access - eth: nfp: fix schedule in atomic context when sync mc address - eth: renesas: rswitch: fix getting mac address from device tree - mobile: ipa: use proper endpoint mask for suspend Previous releases - regressions: - tcp: add TIME_WAIT sockets in bhash2, fix regression caught by Jiri / python tests - net: tc: don't intepret cls results when asked to drop, fix oob-access - vrf: determine the dst using the original ifindex for multicast - eth: bnxt_en: - fix XDP RX path if BPF adjusted packet length - fix HDS (header placement) and jumbo thresholds for RX packets - eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf, avoid memory corruptions Previous releases - always broken: - ulp: prevent ULP without clone op from entering the LISTEN status - veth: fix race with AF_XDP exposing old or uninitialized descriptors - bpf: - pull before calling skb_postpull_rcsum() (fix checksum support and avoid a WARN()) - fix panic due to wrong pageattr of im->image (when livepatch and kretfunc coexist) - keep a reference to the mm, in case the task is dead - mptcp: fix deadlock in fastopen error path - netfilter: - nf_tables: perform type checking for existing sets - nf_tables: honor set timeout and garbage collection updates - ipset: fix hash:net,port,net hang with /0 subnet - ipset: avoid hung task warning when adding/deleting entries - selftests: net: - fix cmsg_so_mark.sh test hang on non-x86 systems - fix the arp_ndisc_evict_nocarrier test for IPv6 - usb: rndis_host: secure rndis_query check against int overflow - eth: r8169: fix dmar pte write access during suspend/resume with WOL - eth: lan966x: fix configuration of the PCS - eth: sparx5: fix reading of the MAC address - eth: qed: allow sleep in qed_mcp_trace_dump() - eth: hns3: - fix interrupts re-initialization after VF FLR - fix handling of promisc when MAC addr table gets full - refine the handling for VF heartbeat - eth: mlx5: - properly handle ingress QinQ-tagged packets on VST - fix io_eq_size and event_eq_size params validation on big endian - fix RoCE setting at HCA level if not supported at all - don't turn CQE compression on by default for IPoIB - eth: ena: - fix toeplitz initial hash key value - account for the number of XDP-processed bytes in interface stats - fix rx_copybreak value update Misc: - ethtool: harden phy stat handling against buggy drivers - docs: netdev: convert maintainer's doc from FAQ to a normal document" * tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) caif: fix memory leak in cfctrl_linkup_request() inet: control sockets should not use current thread task_frag net/ulp: prevent ULP without clone op from entering the LISTEN status qed: allow sleep in qed_mcp_trace_dump() MAINTAINERS: Update maintainers for ptp_vmw driver usb: rndis_host: Secure rndis_query check against int overflow net: dpaa: Fix dtsec check for PCS availability octeontx2-pf: Fix lmtst ID used in aura free drivers/net/bonding/bond_3ad: return when there's no aggregator netfilter: ipset: Rework long task execution when adding/deleting entries netfilter: ipset: fix hash:net,port,net hang with /0 subnet net: sparx5: Fix reading of the MAC address vxlan: Fix memory leaks in error path net: sched: htb: fix htb_classify() kernel-doc net: sched: cbq: dont intepret cls results when asked to drop net: sched: atm: dont intepret cls results when asked to drop dt-bindings: net: marvell,orion-mdio: Fix examples dt-bindings: net: sun8i-emac: Add phy-supply property net: ipa: use proper endpoint mask for suspend selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier ...
2023-01-05Merge tag 'gpio-fixes-for-v6.2-rc3' of ↵Linus Torvalds6-24/+43
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "A reference leak fix, two fixes for using uninitialized variables and more drivers converted to using immutable irqchips: - fix a reference leak in gpio-sifive - fix a potential use of an uninitialized variable in core gpiolib - fix a potential use of an uninitialized variable in gpio-pca953x - make GPIO irqchips immutable in gpio-pmic-eic-sprd, gpio-eic-sprd and gpio-sprd" * tag 'gpio-fixes-for-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sifive: Fix refcount leak in sifive_gpio_probe gpio: sprd: Make the irqchip immutable gpio: pmic-eic-sprd: Make the irqchip immutable gpio: eic-sprd: Make the irqchip immutable gpio: pca953x: avoid to use uninitialized value pinctrl gpiolib: Fix using uninitialized lookup-flags on ACPI platforms
2023-01-05Merge tag 'fbdev-for-6.2-rc3' of ↵Linus Torvalds5-19/+25
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: - Fix Matrox G200eW initialization failure - Fix build failure of offb driver when built as module - Optimize stack usage in omapfb * tag 'fbdev-for-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: omapfb: avoid stack overflow warning fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB fbdev: atyfb: use strscpy() to instead of strncpy() fbdev: omapfb: use strscpy() to instead of strncpy() fbdev: make offb driver tristate
2023-01-05Merge tag 'amd-drm-fixes-6.2-2023-01-04' of ↵Daniel Vetter5-9/+39
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.2-2023-01-04: amdgpu: - DCN 3.2 fix - Display fix amdkfd: - Fix kernel warning Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230105033839.23711-1-alexander.deucher@amd.com
2023-01-05fbdev: omapfb: avoid stack overflow warningArnd Bergmann1-10/+18
The dsi_irq_stats structure is a little too big to fit on the stack of a 32-bit task, depending on the specific gcc options: fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs': fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Since this is only a debugfs file, performance is not critical, so just dynamically allocate it, and print an error message in there in place of a failure code when the allocation fails. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
2023-01-05Merge tag 'drm-misc-fixes-2023-01-05' of ↵Daniel Vetter9-90/+76
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Several fixes to fix the error path of dma_buf_export, add a missing structure declaration resulting in a compiler warning, fix the GEM handle refcounting in panfrost, fix a corrupted image with AFBC on meson, a memleak in virtio, improper plane width for imx, and a lockup in drm_sched_entity_kill() Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230105074909.qd2h23hpxac4lxi7@houat
2023-01-04qed: allow sleep in qed_mcp_trace_dump()Caleb Sander1-8/+20
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop that can run 500K times, so calls to qed_mcp_nvm_rd_cmd() may block the current thread for over 5s. We observed thread scheduling delays over 700ms in production, with stacktraces pointing to this code as the culprit. qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted. It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd(). Add a "can sleep" parameter to qed_find_nvram_image() and qed_nvram_read() so they can sleep during qed_mcp_trace_dump(). qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(), called only by qed_mcp_trace_dump(), allow these functions to sleep. I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep, so keep b_can_sleep set to false when it calls these functions. An example stacktrace from a custom warning we added to the kernel showing a thread that has not scheduled despite long needing resched: [ 2745.362925,17] ------------[ cut here ]------------ [ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0() [ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99 [ 2745.362956,17] Modules linked in: ... [ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x [ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020 [ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20 [ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000 [ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000 [ 2745.363379,17] Call Trace: [ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf [ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0 [ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50 [ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0 [ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0 [ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89 [ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50 [ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40 [ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed] [ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed] [ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed] [ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed] [ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed] [ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed] [ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed] [ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede] [ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190 [ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140 [ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260 [ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0 [ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370 [ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90 [ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710 [ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60 [ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280 [ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220 [ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0 [ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70 [ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79 [ 2745.363622,17] ---[ end trace f6954aa440266421 ]--- Fixes: c965db4446291 ("qed: Add support for debug data collection") Signed-off-by: Caleb Sander <csander@purestorage.com> Acked-by: Alok Prasad <palok@marvell.com> Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.