aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-06-02mac80211: remove short slot/short preamble incapable flagsJohannes Berg1-3/+1
There are no drivers setting IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE or IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE, so any code using the two flags is dead; it's also exceedingly unlikely that any new driver could ever need to set these flags. The wcn36xx code is almost certainly broken, but this preserves the previous behaviour. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-26cfg80211: properly send NL80211_ATTR_DISCONNECTED_BY_AP in disconnectJohannes Berg12-24/+28
When we disconnect from the AP, drivers call cfg80211_disconnect(). This doesn't know whether the disconnection was initiated locally or by the AP though, which can cause problems with the supplicant, for example with WPS. This issue obviously doesn't show up with any mac80211 based driver since mac80211 doesn't call this function. Fix this by requiring drivers to indicate whether the disconnect is locally generated or not. I've tried to update the drivers, but may not have gotten the values correct, and some drivers may currently not be able to report correct values. In case of doubt I left it at false, which is the current behaviour. For libertas, make adjustments as indicated by Dan Williams. Reported-by: Matthieu Mauger <matthieux.mauger@intel.com> Tested-by: Matthieu Mauger <matthieux.mauger@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STAArik Nemtsov1-1/+1
The GO_CONCURRENT regulatory definition can be extended to station interfaces requesting to IR as part of TDLS off-channel operations. Rename the GO_CONCURRENT flag to IR_CONCURRENT and allow the added use-case. Change internal users of GO_CONCURRENT to use the new definition. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06mac80211_hwsim: Fix the supported VHT mcs ratesIlan Peer1-5/+5
Declare that MCS 0-9 are supported for all Rx chains. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06mac80211_hwsim: Set VHT capabilities only for the 5.2 GHz bandIlan Peer1-25/+25
Previously, VHT capabilities and supported MCSs where set for all bands, although VHT is only allowed on 5.2 GHz band. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06mac80211: extend get_tkip_seq to all keysJohannes Berg6-12/+16
Extend the function to read the TKIP IV32/IV16 to read the IV/PN for all ciphers in order to allow drivers with full hardware crypto to properly support this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05mac80211: make LED trigger names constJohannes Berg3-3/+3
This is just a code cleanup, make the LED trigger names const as they're not expected to be modified by drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24iwlwifi: dvm: don't sleep in event_callback callbackEmmanuel Grumbach1-3/+1
This will allow mac80211 to forbid sleeping from the event_callback callback. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24mac80211: remove support for IFF_PROMISCJohannes Berg38-148/+49
This support is essentially useless as typically networks are encrypted, frames will be filtered by hardware, and rate scaling will be done with the intended recipient in mind. For real monitoring of the network, the monitor mode support should be used instead. Removing it removes a lot of corner cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22ath10k: enable IEEE80211_HW_SUPPORT_FAST_XMITJohannes Berg1-1/+2
The driver can clearly enable fast-xmit since it does rate control in the device and thus must do duration calculation there as well. Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22wlcore: enable IEEE80211_HW_SUPPORT_FAST_XMITJohannes Berg1-1/+2
The driver can clearly enable fast-xmit since it does rate control in the device and thus must do duration calculation there as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22mac80211_hwsim: enable IEEE80211_HW_SUPPORT_FAST_XMITJohannes Berg1-1/+2
For hwsim, the duration field in frames is already not valid for the common case of HT/VHT MCSes, so there's little point in trying to keep it accurate for the legacy rates. Enable the fast-xmit code to allow testing that, although given the dependency on hardware crypto it will only be enabled in open network configurations. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds35-290/+508
Pull networking fixes from David Miller: 1) Fix verifier memory corruption and other bugs in BPF layer, from Alexei Starovoitov. 2) Add a conservative fix for doing BPF properly in the BPF classifier of the packet scheduler on ingress. Also from Alexei. 3) The SKB scrubber should not clear out the packet MARK and security label, from Herbert Xu. 4) Fix oops on rmmod in stmmac driver, from Bryan O'Donoghue. 5) Pause handling is not correct in the stmmac driver because it doesn't take into consideration the RX and TX fifo sizes. From Vince Bridgers. 6) Failure path missing unlock in FOU driver, from Wang Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: dsa: use DEVICE_ATTR_RW to declare temp1_max netns: remove BUG_ONs from net_generic() IB/ipoib: Fix ndo_get_iflink sfc: Fix memcpy() with const destination compiler warning. altera tse: Fix network-delays and -retransmissions after high throughput. net: remove unused 'dev' argument from netif_needs_gso() act_mirred: Fix bogus header when redirecting from VLAN inet_diag: fix access to tcp cc information tcp: tcp_get_info() should fetch socket fields once net: dsa: mv88e6xxx: Add missing initialization in mv88e6xxx_set_port_state() skbuff: Do not scrub skb mark within the same name space Revert "net: Reset secmark when scrubbing packet" bpf: fix two bugs in verification logic when accessing 'ctx' pointer bpf: fix bpf helpers to use skb->mac_header relative offsets stmmac: Configure Flow Control to work correctly based on rxfifo size stmmac: Enable unicast pause frame detect in GMAC Register 6 stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree stmmac: Add defines and documentation for enabling flow control stmmac: Add properties for transmit and receive fifo sizes stmmac: fix oops on rmmod after assigning ip addr ...
2015-04-17Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds34-76/+4070
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
2015-04-17IB/ipoib: Fix ndo_get_iflinkErez Shitrit2-2/+6
Currently, iflink of the parent interface was always accessed, even when interface didn't have a parent and hence we crashed there. Handle the interface types properly: for a child interface, return the ifindex of the parent, for parent interface, return its ifindex. For child devices, make sure to set the parent pointer prior to invoking register_netdevice(), this allows the new ndo to be called by the stack immediately after the child device is registered. Fixes: 5aa7add8f14b ('infiniband/ipoib: implement ndo_get_iflink') Reported-by: Honggang Li <honli@redhat.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Honggang Li <honli@redhat.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>+ Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-17sfc: Fix memcpy() with const destination compiler warning.David S. Miller1-1/+1
drivers/net/ethernet/sfc/selftest.c: In function ‘efx_iterate_state’: drivers/net/ethernet/sfc/selftest.c:388:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers] This is because the msg[] member of struct efx_loopback_payload is marked as 'const'. Remove that. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-17altera tse: Fix network-delays and -retransmissions after high throughput.Andreas Oetken1-2/+7
Fix bug which occurs when more than <limit> packets are available during napi-poll, leading to "delays" and retransmissions on the network. Check for (count < limit) before checking the get_rx_status in tse_rx-function. Function get_rx_status is reading from the response-fifo. If there is currently a response in the fifo, reading the last byte of the response pops the value from the fifo. If the limit is checked as second condition and the limit is reached the fifo is popped but the packet is not processed. Signed-off-by: Andreas Oetken <ennoerlangen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-17Merge tag 'acpica-4.1-rc1' of ↵Linus Torvalds37-346/+326
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPICA updates from Rafael Wysocki: "This updates the kernel's ACPICA code to upstream revision 20150410 and adds a fix for a GPE handling regression introduced during the 3.19 cycle on top of that. Included are two stable-candidate bug fixes (one of them fixing a 3.16 regression), multiple other fixes and a bunch of cleanups. Specifics: - Fix for a GPE handling regression on Dell Latitude D600 that caused GPE signaling to stop working on that machine, which appears to be due to a hardware glitch, but it used to work and it can be made work again in a relativly straightforward way (Rafael J Wysocki). - Fix for a mutex unlock regression related to the handling of ACPI tables introduced during the 3.16 development cycle (Octavian Purdila). - _REV modification to always return 2 which has been done by all versions of Windows since NT and the firmware people started to use it to distinguish between OSes in their AML and do some silly and wrong things on that basis (Bob Moore). - Fixes and cleanups related to the acpi_physicall_address data type including one stable-candidate fix for an issue occasionally occuring on 64-bit machines running 32-bit kernels where using offsets provided by the firmware may lead to address overflows (Lv Zheng). - External() opcode support infrastructure needed for recompiling disassembled ACPI tables in some cases including interpreter modification to ignore that opcode (Bob Moore). - Support for the "Windows 2015" string in _OSI (Bob Moore). - GPE debug interface change to return values read from hardware registers (Lv Zheng). - Removal of the __DATE__ macro usage in tools (Rasmus Villemoes). - Assorted minor fixes and cleanups (Lv Zheng, Rickard Strandqvist, Bob Moore)" * tag 'acpica-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Store GPE register enable masks upfront ACPICA: Update version to 20150410. ACPICA: Fix a couple issues with the local printf module. ACPICA: Disassembler: Some cleanup of the table dump module. ACPICA: iASL: Add support for MSDM ACPI table. ACPICA: Update for SLIC ACPI table. ACPICA: Add "//" before ascii output of buffers. ACPICA: Remove unused internal AML opcode. ACPICA: Permanently set _REV to the value '2'. ACPICA: Add "Windows 2015" string to _OSI support. ACPICA: Add infrastructure for External() opcode. ACPICA: iASL: Enhancement for constant folding. ACPICA: iASL/Disassembler: Add option to assume table contains valid AML. ACPICA: Update AML Debugger global variables. ACPICA: Update Resource descriptor dump module. ACPICA: Fix a sscanf format string. ACPICA: Casting changes around acpi_physical_address/acpi_size. ACPICA: Resources: Correct conditional compilation definitions. ACPICA: Utilities: Correct conditional compilation definitions. ACPICA: Tables: Move an iasl specific table function to iasl source file. ...
2015-04-17net: remove unused 'dev' argument from netif_needs_gso()Johannes Berg2-2/+2
In commit 04ffcb255f22 ("net: Add ndo_gso_check") Tom originally added the 'dev' argument to be able to call ndo_gso_check(). Then later, when generalizing this in commit 5f35227ea34b ("net: Generalize ndo_gso_check to ndo_features_check") Jesse removed the call to ndo_gso_check() in netif_needs_gso() by calling the new ndo_features_check() in a different place. This made the 'dev' argument unused. Remove the unused argument and go back to the code as before. Cc: Tom Herbert <therbert@google.com> Cc: Jesse Gross <jesse@nicira.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-17act_mirred: Fix bogus header when redirecting from VLANHerbert Xu1-1/+1
When you redirect a VLAN device to any device, you end up with crap in af_packet on the xmit path because hard_header_len is not equal to skb->mac_len. So the redirected packet contains four extra bytes at the start which then gets interpreted as part of the MAC address. This patch fixes this by only pushing skb->mac_len. We also need to fix ifb because it tries to undo the pushing done by act_mirred. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds44-345/+643
Merge third patchbomb from Andrew Morton: - various misc things - a couple of lib/ optimisations - provide DIV_ROUND_CLOSEST_ULL() - checkpatch updates - rtc tree - befs, nilfs2, hfs, hfsplus, fatfs, adfs, affs, bfs - ptrace fixes - fork() fixes - seccomp cleanups - more mmap_sem hold time reductions from Davidlohr * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (138 commits) proc: show locks in /proc/pid/fdinfo/X docs: add missing and new /proc/PID/status file entries, fix typos drivers/rtc/rtc-at91rm9200.c: make IO endian agnostic Documentation/spi/spidev_test.c: fix warning drivers/rtc/rtc-s5m.c: allow usage on device type different than main MFD type .gitignore: ignore *.tar MAINTAINERS: add Mediatek SoC mailing list tomoyo: reduce mmap_sem hold for mm->exe_file powerpc/oprofile: reduce mmap_sem hold for exe_file oprofile: reduce mmap_sem hold for mm->exe_file mips: ip32: add platform data hooks to use DS1685 driver lib/Kconfig: fix up HAVE_ARCH_BITREVERSE help text x86: switch to using asm-generic for seccomp.h sparc: switch to using asm-generic for seccomp.h powerpc: switch to using asm-generic for seccomp.h parisc: switch to using asm-generic for seccomp.h mips: switch to using asm-generic for seccomp.h microblaze: use asm-generic for seccomp.h arm: use asm-generic for seccomp.h seccomp: allow COMPAT sigreturn overrides ...
2015-04-17drivers/rtc/rtc-at91rm9200.c: make IO endian agnosticBen Dooks1-2/+2
Change the __raw IO calls to readl/write_relaxed which makes the driver endian agnostic to run properly on big endian systems. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Andrew Victor <linux@maxim.org.za> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s5m.c: allow usage on device type different than main MFD typeKrzysztof Kozlowski1-4/+6
The RTC driver supports two flavors of S5M devices: S5M8767-like and S2MPS14-like. On S2MPS13 and S2MPS14 devices the RTC module is the same so we want to re-use the existing support of S2MPS14. However device type was passed from parent MFD driver in platform data structure. This way for the S2MPS13 device the main MFD driver passed device type of 'S2MPS13X'. Instead decouple detecting of device type between main MFD and RTC driver. This allows adding support for other S2MPS14 variations (like S2MPS11 and S2MPS13) easily by adding to mfd/sec-core.c: static const struct mfd_cell s2mps13_devs[] = { { .name = "s2mps14-rtc", } }; Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17oprofile: reduce mmap_sem hold for mm->exe_fileDavidlohr Bueso1-14/+16
sync_buffer() needs the mmap_sem for two distinct operations, both only occurring upon user context switch handling: 1) Dealing with the exe_file. 2) Adding the dcookie data as we need to lookup the vma that backs it. This is done via add_sample() and add_data(). This patch isolates 1), for it will no longer need the mmap_sem for serialization. However, for now, make of the more standard get_mm_exe_file(), requiring only holding the mmap_sem to read the value, and relying on reference counting to make sure that the exe file won't dissappear underneath us while doing the get dcookie. As a consequence, for 2) we move the mmap_sem locking into where we really need it, in lookup_dcookie(). The benefits are twofold: reduce mmap_sem hold times, and cleaner code. [akpm@linux-foundation.org: export get_mm_exe_file for arch/x86/oprofile/oprofile.ko] Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Robert Richter <rric@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17memstick: mspro_block: add missing curly bracesDan Carpenter1-1/+2
Using the indenting we can see the curly braces were obviously intended. This is a static checker fix, but my guess is that we don't read enough bytes, because we don't calculate "t_len" correctly. Fixes: f1d82698029b ('memstick: use fully asynchronous request processing') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17bfs: bfad_worker cleanupJiri Slaby1-13/+9
This kthread is not loop at all due to break at the end of the loop. Make that function linear, with no while loop. And remove an unnecessary cast. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17rtc: use more standard kernel logging stylesJoe Perches13-24/+49
Neaten the logging a bit by adding #define pr_fmt Miscellanea: o Remove __FILE__/__func__ uses o Coalesce formats adding missing spaces o Align arguments o (rtc-cmos) Integrated 2 consecutive messages Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-hym8563.c: fix swapped enable/disable of clockout control bitHeiko Stübner1-5/+5
The hym8563 datasheet describes the clock output control-bit as "when set to logic 0, the square wave output is enable, when set to logic 1, the CLKOUT output is inhibited". But in reality the setting is exactly opposite. Before now, the clock output was not really used, but on the rk3288 soc this generated clock is used to supply the temperature sensor block and the swapped bit value prevented it from working. With the corrected value, the tsadc now reports correct values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s3c.c: remove one superfluous rtc_valid_tm() checkKrzysztof Kozlowski1-3/+1
s3c_rtc_gettime() already returns the result of rtc_valid_tm() on the obtained time so get rid of another call to rtc_valid_tm(). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-omap.c: use module_platform_driverLokesh Vutla1-2/+3
module_platform_driver_probe() prevents driver from requesting probe deferral. So using module_platform_drive() to support probe deferral. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/Kconfig: update Kconfig for OMAP RTCLokesh Vutla1-3/+3
RTC is present in AM43xx and DRA7xx also. Updating the Kconfig to depend on ARCH_OMAP or ARCH_DAVINCI Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-omap.c: unlock and lock rtc registers before and after ↵Lokesh Vutla1-11/+52
register writes RTC module contains a kicker mechanism to prevent any spurious writes from changing the register values. This mechanism requires two MMR writes to the KICK0 and KICK1 registers with exact data values before the kicker lock mechanism is released. Currently the driver release the lock in the probe and leaves it enabled until the rtc driver removal. This eliminates the idea of preventing spurious writes when RTC driver is loaded. So implement rtc lock and unlock functions before and after register writes. This is as advised by Paul to implement lock and unlock functions in the driver and not to unlock and leave it in probe. The same discussion can be seen here: http://www.mail-archive.com/linux-omap%40vger.kernel.org/msg111588.html Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s3c.c: fix failed first read of RTC timeKrzysztof Kozlowski1-16/+16
Initialize the device time (if it is wrong) before registering RTC device to fix following error message during rtc-s3c probe: [ 2.215414] rtc (null): read_time: fail to read [ 2.216322] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17rtc: hctosys: use function name in the error logAaro Koskinen1-1/+1
Use function name in the error log instead of __FILE__. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/interface.c: __rtc_read_time: reduce log levelAaro Koskinen1-2/+3
__rtc_read_time logs should be debug logs instead of error logs. For example, when the RTC clock is not set, it's not really useful to print a kernel error log every time someone tries to read the clock: ~ # hwclock -r [ 604.508263] rtc rtc0: read_time: fail to read hwclock: RTC_RD_TIME: Invalid argument If there's a real error, it's likely that lower level or higher level code will tell it anyway. Make these logs debug logs, and also print the error code for the read failure. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/class.c: initialize rtc name earlyAaro Koskinen1-3/+3
In some error cases RTC name is used before it is initialized: rtc-rs5c372 0-0032: clock needs to be set rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6 rtc (null): read_time: fail to read rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 Fix by initializing the name early. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s5m.c: add support for S2MPS13 RTCKrzysztof Kozlowski1-1/+19
The S2MPS13 RTC is almost the same as S2MPS14. The differences when updating alarm are: 1. Set WUDR+AUDR field instead of WUDR+RUDR. 2. Clear the AUDR field later (it is not auto-cleared). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17rtc: driver for Conexant Digicolor CX92755 on-chip RTCBaruch Siach3-0/+238
Add driver for the RTC hardware block on the Conexant CX92755 SoC, from the Digicolor series of SoCs. Tested on the Equinox evaluation board for the CX92755 chip. [akpm@linux-foundation.org: build command arrays at compile-time] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-hym8563.c: return clock rate even when clock is disabledHeiko Stuebner1-1/+1
When the clock is disabled, do not return a rate of 0 but instead return the rate the clock will be running at after it gets enabled. This prevents problems when the core clock code is trying to determine a suitable rate, while the clock is still off. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-da9052.c: register ability of alarm to wake device from suspendAdam Ward1-0/+2
Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Tested-by: Adam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-da9052.c: add constraints to set valid yearAdam Ward1-0/+8
Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Tested-by: Adam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-da9052.c: add extra reads with timeouts to avoid returning ↵Adam Ward1-21/+66
partially updated values The RTC is in a different clock domain so a quick read after write can retrieve a mangled value of the old/new values Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Tested-by: Adam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-ds1685.c: fix sparse warningsJoshua Kinard1-2/+2
Fix two minor sparse warnings: CHECK drivers/rtc/rtc-ds1685.c drivers/rtc/rtc-ds1685.c:2178:1: warning: function 'ds1685_rtc_poweroff' with external linkage has definition drivers/rtc/rtc-ds1685.c:802:23: warning: Using plain integer as NULL pointer Fixes: aaaf5fbf56f1 ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-ds1685.c: remove .owner assignment from platform_driverJoshua Kinard1-1/+0
The rtc driver core now sets the platform_driver 'owner' property, so remove the assignment from the DS1685 driver. Fixes: aaaf5fbf56f1: "rtc: add driver for DS1685 family of real time clocks" Signed-off-by: Joshua Kinard <kumba@gentoo.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-ab-b5ze-s3.c: constify struct regmap_configKrzysztof Kozlowski1-1/+1
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s3c.c: delete duplicate clock controlChanwoo Choi1-124/+39
The current functions in s3c-rtc driver execute clk_enable/disable() to control clocks and some functions execute s3c_rtc_alarm_clk_enable() unnecessarily. So this patch deletes the duplicate clock control and spilts s3c_rtc_alarm_clk_enable() out as s3c_rtc_enable_clk()/s3c_rtc_disable_clk() to improve readability. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17rtc: hctosys: do not treat lack of RTC device as errorFloris Bos1-1/+1
When using device trees on the ARM platform, it is not certain at compile time whether or not the system will have a RTC. If one enables CONFIG_HCTOSYS just in case the system booted has a RTC, and it turns out not to be, this will result in a big fat "unable to open rtc device" error being printed to console, even when "quiet" is set in the kernel cmdline. Fix this by outputting the message with loglevel info instead. Signed-off-by: Floris Bos <bos@je-eigen-domein.nl> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-x1205.c: use sign_extend32() for sign extensionMartin Kepplinger1-2/+2
Despite its name, sign_extend32() is safe to use for 8 bit types too. (See https://lkml.org/lkml/2015/1/18/289). Signed-off-by: Martin Kepplinger <martink@posteo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-em3027.c: add device tree supportPeter Robinson1-0/+11
Set the of_match_table for this driver so that devices can be described in the device tree. This device is used in the Trimslice and is already defined in the Trimslice device tree. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17rtc: stmp3xxx: use optional crystal in low power statesUwe Kleine-König1-6/+60
The rtc's status register allows to determine if a 32k crystal is connected to keep the rtc running in low power states provided the corresponding fuse bits were blown correctly during production. (In case they were not, the right frequency can be stated in the device tree.) If there is no such crystal available force the 24 MHz XTAL clock to keep running to retain the right date and time. Otherwise use the crystal to save some power. It would be nice to only switch to the crystal when the XTAL clock is about to be disabled and keep the crystal off when unneeded because XTAL is always on while the chip is powered on. But as sudden power loss isn't detectable this is not save. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Powered by cgit, Gruvboxed by Blaster4385.