aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-12-21Merge branch 'for-linus' of ↵Linus Torvalds2-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - NULL pointer dereference fix in Vivaldi driver (Jiasheng Jiang) - regression fix for device probing in Holtek driver (Benjamin Tissoires) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: potential dereference of null pointer HID: holtek: fix mouse probing
2021-12-21usb: typec: ucsi: Only check the contract if there is a connectionHeikki Krogerus1-1/+3
The driver must make sure there is an actual connection before checking details about the USB Power Delivery contract. Those details are not valid unless there is a connection. This fixes NULL pointer dereference that is caused by an attempt to register bogus partner alternate mode that the firmware on some platform may report before the actual connection. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215117 Fixes: 6cbe4b2d5a3f ("usb: typec: ucsi: Check the partner alt modes always if there is PD contract") Reported-by: Chris Hixon <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21gpio: virtio: remove timeoutVincent Whitchurch1-5/+1
The driver imposes an arbitrary one second timeout on virtio requests, but the specification doesn't prevent the virtio device from taking longer to process requests, so remove this timeout to support all systems and device implementations. Fixes: 3a29355a22c0275fe86 ("gpio: Add virtio-gpio driver") Signed-off-by: Vincent Whitchurch <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-12-21ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler moduleWu Bo1-1/+1
Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8ab4add ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by: Wu Bo <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2021-12-21mmc: mmci: stm32: clear DLYB_CR after sending tuning commandYann Gautier1-0/+2
During test campaign, and especially after several unbind/bind sequences, it has been seen that the SD-card on SDMMC1 thread could freeze. The freeze always appear on a CMD23 following a CMD19. Checking SDMMC internal registers shows that the tuning command (CMD19) has failed. The freeze is then due to the delay block involved in the tuning sequence. To correct this, clear the delay block register DLYB_CR register after the tuning commands. Signed-off-by: Christophe Kerello <[email protected]> Signed-off-by: Yann Gautier <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Fixes: 1103f807a3b9 ("mmc: mmci_sdmmc: Add execute tuning with delay block") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2021-12-21xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.Mathias Nyman1-1/+4
The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like other Fresco controllers, but should not have the BROKEN_MSI quirks set. BROKEN_MSI quirk causes issues in detecting usb drives connected to docks with this FL1100 controller. The BROKEN_MSI flag was apparently accidentally set together with the TRUST_TX_LENGTH quirk Original patch went to stable so this should go there as well. Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller") Cc: [email protected] cc: Nikolay Martynov <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assertAndra Paraschiv1-2/+3
After commit 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()"), the call to get_user_pages() will trigger the mmap assert. static inline void mmap_assert_locked(struct mm_struct *mm) { lockdep_assert_held(&mm->mmap_lock); VM_BUG_ON_MM(!rwsem_is_locked(&mm->mmap_lock), mm); } [ 62.521410] kernel BUG at include/linux/mmap_lock.h:156! ........................................................... [ 62.538938] RIP: 0010:find_vma+0x32/0x80 ........................................................... [ 62.605889] Call Trace: [ 62.608502] <TASK> [ 62.610956] ? lock_timer_base+0x61/0x80 [ 62.614106] find_extend_vma+0x19/0x80 [ 62.617195] __get_user_pages+0x9b/0x6a0 [ 62.620356] __gup_longterm_locked+0x42d/0x450 [ 62.623721] ? finish_wait+0x41/0x80 [ 62.626748] ? __kmalloc+0x178/0x2f0 [ 62.629768] ne_set_user_memory_region_ioctl.isra.0+0x225/0x6a0 [nitro_enclaves] [ 62.635776] ne_enclave_ioctl+0x1cf/0x6d7 [nitro_enclaves] [ 62.639541] __x64_sys_ioctl+0x82/0xb0 [ 62.642620] do_syscall_64+0x3b/0x90 [ 62.645642] entry_SYSCALL_64_after_hwframe+0x44/0xae Use get_user_pages_unlocked() when setting the enclave memory regions. That's a similar pattern as mmap_read_lock() used together with get_user_pages(). Fixes: 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()") Cc: [email protected] Signed-off-by: Andra Paraschiv <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21binder: fix async_free_space accounting for empty parcelsTodd Kjos1-1/+1
In 4.13, commit 74310e06be4d ("android: binder: Move buffer out of area shared with user space") fixed a kernel structure visibility issue. As part of that patch, sizeof(void *) was used as the buffer size for 0-length data payloads so the driver could detect abusive clients sending 0-length asynchronous transactions to a server by enforcing limits on async_free_size. Unfortunately, on the "free" side, the accounting of async_free_space did not add the sizeof(void *) back. The result was that up to 8-bytes of async_free_space were leaked on every async transaction of 8-bytes or less. These small transactions are uncommon, so this accounting issue has gone undetected for several years. The fix is to use "buffer_size" (the allocated buffer size) instead of "size" (the logical buffer size) when updating the async_free_space during the free operation. These are the same except for this corner case of asynchronous transactions with payloads < 8 bytes. Fixes: 74310e06be4d ("android: binder: Move buffer out of area shared with user space") Signed-off-by: Todd Kjos <[email protected]> Cc: [email protected] # 4.14+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21drm/nouveau: wait for the exclusive fence after the shared ones v2Christian König1-13/+15
Always waiting for the exclusive fence resulted on some performance regressions. So try to wait for the shared fences first, then the exclusive fence should always be signaled already. v2: fix incorrectly placed "(", add some comment why we do this. Signed-off-by: Christian König <[email protected]> Tested-by: Stefan Fritsch <[email protected]> Tested-by: Dan Moulding <[email protected]> Acked-by: Ben Skeggs <[email protected]> Signed-off-by: Christian König <[email protected]> Cc: <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-21usb: mtu3: set interval of FS intr and isoc endpointChunfeng Yun1-0/+7
Add support to set interval also for FS intr and isoc endpoint. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: [email protected] Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: mtu3: fix list_head check warningChunfeng Yun1-0/+1
This is caused by uninitialization of list_head. BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4 Call trace: dump_backtrace+0x0/0x298 show_stack+0x24/0x34 dump_stack+0x130/0x1a8 print_address_description+0x88/0x56c __kasan_report+0x1b8/0x2a0 kasan_report+0x14/0x20 __asan_load8+0x9c/0xa0 __list_del_entry_valid+0x34/0xe4 mtu3_req_complete+0x4c/0x300 [mtu3] mtu3_gadget_stop+0x168/0x448 [mtu3] usb_gadget_unregister_driver+0x204/0x3a0 unregister_gadget_item+0x44/0xa4 Fixes: 83374e035b62 ("usb: mtu3: add tracepoints to help debug") Cc: [email protected] Reported-by: Yuwen Ng <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: mtu3: add memory barrier before set GPD's HWOChunfeng Yun1-1/+6
There is a seldom issue that the controller access invalid address and trigger devapc or emimpu violation. That is due to memory access is out of order and cause gpd data is not correct. Add mb() to prohibit compiler or cpu from reordering to make sure GPD is fully written before setting its HWO. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Cc: [email protected] Reported-by: Eddie Hung <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: mtu3: fix interval value for intr and isocChunfeng Yun1-2/+2
Use the Interval value from isoc/intr endpoint descriptor, no need minus one. The original code doesn't cause transfer error for normal cases, but it may have side effect with respond time of ERDY or tPingTimeout. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.Vincent Pelletier1-3/+6
ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb84 r6:c3a12260 r5:bf54d014 r4:c229f000 [ 1946.646273] [<bf547d74>] (ffs_fs_kill_sb [usb_f_fs]) from [<c0326d50>] (deactivate_locked_super+0x54/0x9c) [ 1946.664893] r5:bf54d014 r4:c229f000 [ 1946.672921] [<c0326cfc>] (deactivate_locked_super) from [<c0326df8>] (deactivate_super+0x60/0x64) [ 1946.690722] r5:c2a09000 r4:c229f000 [ 1946.698706] [<c0326d98>] (deactivate_super) from [<c0349a28>] (cleanup_mnt+0xe4/0x14c) [ 1946.715553] r5:c2a09000 r4:00000000 [ 1946.723528] [<c0349944>] (cleanup_mnt) from [<c0349b08>] (__cleanup_mnt+0x1c/0x20) [ 1946.739922] r7:c0dfcb84 r6:c3a12260 r5:c3a126fc r4:00000000 [ 1946.750088] [<c0349aec>] (__cleanup_mnt) from [<c0143d10>] (task_work_run+0x84/0xb8) [ 1946.766602] [<c0143c8c>] (task_work_run) from [<c010bdc8>] (do_work_pending+0x470/0x56c) [ 1946.783540] r7:5ac3c35a r6:c0d0424c r5:c200bfb0 r4:c200a000 [ 1946.793614] [<c010b958>] (do_work_pending) from [<c01000c0>] (slow_work_pending+0xc/0x20) [ 1946.810553] Exception stack(0xc200bfb0 to 0xc200bff8) [ 1946.820129] bfa0: 00000000 00000000 000000aa b5e21430 [ 1946.837104] bfc0: bef867a0 00000001 bef86840 00000034 bef86838 bef86790 bef86794 bef867a0 [ 1946.854125] bfe0: 00000000 bef86798 b67b7a1c b6d626a4 60000010 b5a23760 [ 1946.865335] r10:00000000 r9:c200a000 r8:c0100224 r7:00000034 r6:bef86840 r5:00000001 [ 1946.881914] r4:bef867a0 [ 1946.888793] ---[ end trace 7387f2a9725b28d0 ]--- Fixes: 5e33f6fdf735 ("usb: gadget: ffs: add eventfd notification about ffs events") Cc: stable <[email protected]> Signed-off-by: Vincent Pelletier <[email protected]> Link: https://lore.kernel.org/r/f79eeea29f3f98de6782a064ec0f7351ad2f598f.1639793920.git.plr.vincent@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-20igb: fix deadlock caused by taking RTNL in RPM resume pathHeiner Kallweit1-6/+13
Recent net core changes caused an issue with few Intel drivers (reportedly igb), where taking RTNL in RPM resume path results in a deadlock. See [0] for a bug report. I don't think the core changes are wrong, but taking RTNL in RPM resume path isn't needed. The Intel drivers are the only ones doing this. See [1] for a discussion on the issue. Following patch changes the RPM resume path to not take RTNL. [0] https://bugzilla.kernel.org/show_bug.cgi?id=215129 [1] https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/t/ Fixes: bd869245a3dc ("net: core: try to runtime-resume detached device in __dev_open") Fixes: f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops") Tested-by: Martin Stolpe <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-20gve: Correct order of processing device optionsJeroen de Borst1-4/+4
The legacy raw addressing device option was processed before the new RDA queue format option. This caused the supported features mask, which is provided only on the RDA queue format option, not to be set. This disabled jumbo-frame support when using raw adressing. Fixes: 255489f5b33c ("gve: Add a jumbo-frame device option") Signed-off-by: Jeroen de Borst <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds4-9/+67
Pull rdma fixes from Jason Gunthorpe: "Last fixes before holidays. Nothing very exciting: - Work around a HW bug in HNS HIP08 - Recent memory leak regression in qib - Incorrect use of kfree() for vmalloc memory in hns" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Replace kfree() with kvfree() IB/qib: Fix memory leak in qib_user_sdma_queue_pkts() RDMA/hns: Fix RNR retransmission issue for HIP08
2021-12-20Merge tag 'spi-fix-v5.16-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One small fix for a long standing issue with error handling on probe in the Armada driver" * tag 'spi-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: change clk_disable_unprepare to clk_unprepare
2021-12-20Merge branch 'xsa' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds6-65/+189
Merge xen fixes from Juergen Gross: "Fixes for two issues related to Xen and malicious guests: - Guest can force the netback driver to hog large amounts of memory - Denial of Service in other guests due to event storms" * 'xsa' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netback: don't queue unlimited number of packages xen/netback: fix rx queue stall detection xen/console: harden hvc_xen against event channel storms xen/netfront: harden netfront against event channel storms xen/blkfront: harden blkfront against event channel storms
2021-12-20drm/i915/guc: Only assign guc_id.id when stealing guc_idMatthew Brost1-1/+1
Previously assigned whole guc_id structure (list, spin lock) which is incorrect, only assign the guc_id.id. Fixes: 0f7976506de61 ("drm/i915/guc: Rework and simplify locking") Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: John Harrison <[email protected]> Signed-off-by: John Harrison <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 939d8e9c87e704fd5437e2c8b80929591fe540eb) Signed-off-by: Jani Nikula <[email protected]>
2021-12-20drm/i915/guc: Use correct context lock when callig clr_context_registeredMatthew Brost1-2/+2
s/ce/cn/ when grabbing guc_state.lock before calling clr_context_registered. Fixes: 0f7976506de61 ("drm/i915/guc: Rework and simplify locking") Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Daniele Ceraolo Spurio <[email protected]> Signed-off-by: John Harrison <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit b25db8c782ad7ae80d4cea2a09c222f4f8980bb9) Signed-off-by: Jani Nikula <[email protected]>
2021-12-20Merge tag 'imx-fixes-5.16-3' of ↵Arnd Bergmann2-0/+23
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.16, round 3: - Fix imx6qdl-wandboard Ethernet support by adding 'qca,clk-out-frequency' property. - Fix scl-gpios property typo in LX2160A device tree. * tag 'imx-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: lx2160a: fix scl-gpios property name ARM: dts: imx6qdl-wandboard: Fix Ethernet support soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Link: https://lore.kernel.org/r/20211218052003.GA25102@dragon Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-20HID: potential dereference of null pointerJiasheng Jiang1-0/+3
The return value of devm_kzalloc() needs to be checked. To avoid hdev->dev->driver_data to be null in case of the failure of alloc. Fixes: 14c9c014babe ("HID: add vivaldi HID driver") Cc: [email protected] Signed-off-by: Jiasheng Jiang <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-20HID: holtek: fix mouse probingBenjamin Tissoires1-0/+15
An overlook from the previous commit: we don't even parse or start the device, meaning that the device is not presented to user space. Fixes: 93020953d0fa ("HID: check for valid USB device for many HID drivers") Cc: [email protected] Link: https://bugs.archlinux.org/task/73048 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215341 Link: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Benjamin Tissoires <[email protected]>
2021-12-20mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commandsMartin Blumenstingl1-0/+16
The vendor driver implements special handling for multi-block SD_IO_RW_EXTENDED (and SD_IO_RW_DIRECT) commands which have data attached to them. It sets the MANUAL_STOP bit in the MESON_SDHC_MISC register for these commands. In all other cases this bit is cleared. Here we omit SD_IO_RW_DIRECT since that command never has any data attached to it. This fixes SDIO wifi using the brcmfmac driver which reported the following error without this change on a Netxeon S82 board using a Meson8 (S802) SoC: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_sdiod_ramrw: membytes transfer failed brcmf_sdio_download_code_file: error -110 on writing 219557 membytes at 0x00000000 brcmf_sdio_download_firmware: dongle image file download failed And with this change: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d Fixes: e4bf1b0970ef96 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by: Martin Blumenstingl <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2021-12-20mmc: core: Disable card detect during shutdownUlf Hansson3-1/+16
It's seems prone to problems by allowing card detect and its corresponding mmc_rescan() work to run, during platform shutdown. For example, we may end up turning off the power while initializing a card, which potentially could damage it. To avoid this scenario, let's add ->shutdown_pre() callback for the mmc host class device and then turn of the card detect from there. Reported-by: Al Cooper <[email protected]> Suggested-by: Adrian Hunter <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-12-20Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312Johnny Chuang1-1/+45
The eKTH3900/eKTH5312 series do not support the firmware update rules of Remark ID. Exclude these two series from checking it when updating the firmware in touch controllers. Signed-off-by: Johnny Chuang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2021-12-19Merge tag 'irq_urgent_for_v5.16_rc6' of ↵Linus Torvalds1-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Clear the PCI_MSIX_FLAGS_MASKALL bit too on the error path so that it is restored to its reset state - Mask MSI-X vectors late on the init path in order to handle out-of-spec Marvell NVME devices which apparently look at the MSI-X mask even when MSI-X is disabled * tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error PCI/MSI: Mask MSI-X vectors only on success
2021-12-19gpio: dln2: Fix interrupts when replugging the deviceNoralf Trønnes1-10/+9
When replugging the device the following message shows up: gpio gpiochip2: (dln2): detected irqchip that is shared with multiple gpiochips: please fix the driver. This also has the effect that interrupts won't work. The same problem would also show up if multiple devices where plugged in. Fix this by allocating the irq_chip data structure per instance like other drivers do. I don't know when this problem appeared, but it is present in 5.10. Cc: <[email protected]> # 5.10+ Cc: Daniel Baluta <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-12-18Merge tag 'tty-5.16-rc6' of ↵Linus Torvalds2-21/+22
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two small tty/serial fixes for 5.16-rc6. They include: - n_hdlc fix for syzbot reported problem that you were previously copied on. - 8250_fintek driver fix that resolved a console problem by removing a previous change. Both have been in linux-next with no reported issues" * tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_fintek: Fix garbled text for console tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronous
2021-12-18Merge tag 'usb-5.16-rc6' of ↵Linus Torvalds15-35/+87
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for reported problems. They include: - dwc2 driver fixes - xhci driver fixes - cdnsp driver fixes - typec driver fix - gadget u_ether driver fix - new quirk additions - usb gadget endpoint calculation fix - usb serial new device ids - revert of a xhci-dbg change that broke early debug booting All changes, except for the revert, have been in linux-next with no reported problems. The revert was from yesterday, and it was reported by the developers affected that it resolved their problem" * tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: early: convert to readl_poll_timeout_atomic()" usb: typec: tcpm: fix tcpm unregister port but leave a pending timer usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04) usb: xhci: Extend support for runtime power management for AMD's Yellow carp. usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe USB: gadget: bRequestType is a bitfield, not a enum USB: serial: option: add Telit FN990 compositions USB: serial: cp210x: fix CP2105 GPIO registration usb: cdnsp: Fix incorrect status for control request usb: cdnsp: Fix issue in cdnsp_log_ep trace event usb: cdnsp: Fix incorrect calling of cdnsp_died function usb: xhci-mtk: fix list_del warning when enable list debug usb: gadget: u_ether: fix race in setting MAC address in setup phase
2021-12-18qlcnic: potential dereference null pointer of rx_queue->page_ringJiasheng Jiang3-5/+13
The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by: Jiasheng Jiang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-18hamradio: improve the incomplete fix to avoid NPDLin Ma1-2/+2
The previous commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") reorder the kfree operations and unregister_netdev operation to prevent UAF. This commit improves the previous one by also deferring the nullify of the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs. Partial of the stack trace is shown below. BUG: kernel NULL pointer dereference, address: 0000000000000538 RIP: 0010:ax_xmit+0x1f9/0x400 ... Call Trace: dev_hard_start_xmit+0xec/0x320 sch_direct_xmit+0xea/0x240 __qdisc_run+0x166/0x5c0 __dev_queue_xmit+0x2c7/0xaf0 ax25_std_establish_data_link+0x59/0x60 ax25_connect+0x3a0/0x500 ? security_socket_connect+0x2b/0x40 __sys_connect+0x96/0xc0 ? __hrtimer_init+0xc0/0xc0 ? common_nsleep+0x2e/0x50 ? switch_fpu_return+0x139/0x1a0 __x64_sys_connect+0x11/0x20 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The crash point is shown as below static void ax_encaps(...) { ... set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL! ... } By placing the nullify action after the unregister_netdev, the ax->tty pointer won't be assigned as NULL net_device framework layer is well synchronized. Signed-off-by: Lin Ma <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-18Merge branch '100GbE' of ↵David S. Miller4-41/+62
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-17 Maciej Fijalkowski says: It seems that previous [0] Rx fix was not enough and there are still issues with AF_XDP Rx ZC support in ice driver. Elza reported that for multiple XSK sockets configured on a single netdev, some of them were becoming dead after a while. We have spotted more things that needed to be addressed this time. More of information can be found in particular commit messages. It also carries Alexandr's patch that was sent previously which was overlapping with this set. [0]: https://lore.kernel.org/bpf/[email protected]/ ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-17tun: avoid double free in tun_free_netdevGeorge Kennedy1-56/+59
Avoid double free in tun_free_netdev() by moving the dev->tstats and tun->security allocs to a new ndo_init routine (tun_net_init()) that will be called by register_netdevice(). ndo_init is paired with the desctructor (tun_free_netdev()), so if there's an error in register_netdevice() the destructor will handle the frees. BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1 Hardware name: Red Hat KVM, BIOS Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247 kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372 ____kasan_slab_free mm/kasan/common.c:346 [inline] __kasan_slab_free+0x107/0x120 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook mm/slub.c:1749 [inline] slab_free mm/slub.c:3513 [inline] kfree+0xac/0x2d0 mm/slub.c:4561 selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 security_tun_dev_free_security+0x4f/0x90 security/security.c:2342 tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215 netdev_run_todo+0x4df/0x840 net/core/dev.c:10627 rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112 __tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302 tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: syzkaller <[email protected]> Signed-off-by: George Kennedy <[email protected]> Suggested-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-17net: marvell: prestera: fix incorrect structure accessYevhen Orlov1-7/+12
In line: upper = info->upper_dev; We access upper_dev field, which is related only for particular events (e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory access for another events, when ptr is not netdev_notifier_changeupper_info. The KASAN logs are as follows: [ 30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778 [ 30.139866] [ 30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6 [ 30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 30.153056] Call trace: [ 30.155547] dump_backtrace+0x0/0x2c0 [ 30.159320] show_stack+0x18/0x30 [ 30.162729] dump_stack_lvl+0x68/0x84 [ 30.166491] print_address_description.constprop.0+0x74/0x2b8 [ 30.172346] kasan_report+0x1e8/0x250 [ 30.176102] __asan_load8+0x98/0xe0 [ 30.179682] prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.186847] prestera_netdev_event_handler+0x1b4/0x1c0 [prestera] [ 30.193313] raw_notifier_call_chain+0x74/0xa0 [ 30.197860] call_netdevice_notifiers_info+0x68/0xc0 [ 30.202924] register_netdevice+0x3cc/0x760 [ 30.207190] register_netdev+0x24/0x50 [ 30.211015] prestera_device_register+0x8a0/0xba0 [prestera] Fixes: 3d5048cc54bd ("net: marvell: prestera: move netdev topology validation to prestera_main") Signed-off-by: Yevhen Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-17net: marvell: prestera: fix incorrect return of port_findYevhen Orlov1-6/+10
In case, when some ports is in list and we don't find requested - we return last iterator state and not return NULL as expected. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Yevhen Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-17net: lantiq_xrx200: increase buffer reservationAleksander Jan Bajkowski1-10/+24
If the user sets a lower mtu on the CPU port than on the switch, then DMA inserts a few more bytes into the buffer than expected. In the worst case, it may exceed the size of the buffer. The experiments showed that the buffer should be a multiple of the burst length value. This patch rounds the length of the rx buffer upwards and fixes this bug. The reservation of FCS space in the buffer has been removed as PMAC strips the FCS. Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames") Reported-by: Thomas Nixon <[email protected]> Signed-off-by: Aleksander Jan Bajkowski <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-17Merge tag 'libata-5.16-rc6' of ↵Linus Torvalds1-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fix from Damien Le Moal: "A single fix for this cycle: - Check that ATA16 passthrough commands that do not transfer any data have a DMA direction set to DMA_NONE (From George)" * tag 'libata-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: libata: if T_LENGTH is zero, dma direction should be DMA_NONE
2021-12-17Merge tag 'scsi-fixes' of ↵Linus Torvalds1-17/+21
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One driver fix: the pm8001 has never actually worked on a system with an IOMMU and this fixes that use case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
2021-12-17ipmi: fix initialization when workqueue allocation failsThadeu Lima de Souza Cascardo1-6/+9
If the workqueue allocation fails, the driver is marked as not initialized, and timer and panic_notifier will be left registered. Instead of removing those when workqueue allocation fails, do the workqueue initialization before doing it, and cleanup srcu_struct if it fails. Fixes: 1d49eb91e86e ("ipmi: Move remove_work to dedicated workqueue") Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Cc: Corey Minyard <[email protected]> Cc: Ioanna Alifieraki <[email protected]> Cc: [email protected] Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2021-12-17ipmi: bail out if init_srcu_struct failsThadeu Lima de Souza Cascardo1-1/+3
In case, init_srcu_struct fails (because of memory allocation failure), we might proceed with the driver initialization despite srcu_struct not being entirely initialized. Fixes: 913a89f009d9 ("ipmi: Don't initialize anything in the core until something uses it") Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Cc: Corey Minyard <[email protected]> Cc: [email protected] Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2021-12-17Merge tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull block fixes from Jens Axboe: - Fix for hammering on the delayed run queue timer (me) - bcache regression fix for this merge window (Lin) - Fix a divide-by-zero in the blk-iocost code (Tejun) * tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block: bcache: fix NULL pointer reference in cached_dev_detach_finish block: reduce kblockd_mod_delayed_work_on() CPU consumption iocost: Fix divide-by-zero on donation from low hweight cgroup
2021-12-17Merge tag 'dmaengine-fix-5.16' of ↵Linus Torvalds6-64/+129
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes, notably: - uninit variable fix for dw-axi-dmac driver - return value check dw-edma driver - calling wq quiesce inside spinlock and missed completion for idxd driver - mod alias fix for st_fdma driver" * tag 'dmaengine-fix-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: st_fdma: fix MODULE_ALIAS dmaengine: idxd: fix missed completion on abort path dmaengine: ti: k3-udma: Fix smatch warnings dmaengine: idxd: fix calling wq quiesce inside spinlock dmaengine: dw-edma: Fix return value check for dma_set_mask_and_coherent() dmaengine: dw-axi-dmac: Fix uninitialized variable in axi_chan_block_xfer_start()
2021-12-17ice: xsk: fix cleaned_count settingMaciej Fijalkowski2-6/+1
Currently cleaned_count is initialized to ICE_DESC_UNUSED(rx_ring) and later on during the Rx processing it is incremented per each frame that driver consumed. This can result in excessive buffers requested from xsk pool based on that value. To address this, just drop cleaned_count and pass ICE_DESC_UNUSED(rx_ring) directly as a function argument to ice_alloc_rx_bufs_zc(). Idea is to ask for buffers as many as consumed. Let us also call ice_alloc_rx_bufs_zc unconditionally at the end of ice_clean_rx_irq_zc. This has been changed in that way for corresponding ice_clean_rx_irq, but not here. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-17ice: xsk: allow empty Rx descriptors on XSK ZC data pathMaciej Fijalkowski1-4/+10
Commit ac6f733a7bd5 ("ice: allow empty Rx descriptors") stated that ice HW can produce empty descriptors that are valid and they should be processed. Add this support to xsk ZC path to avoid potential processing problems. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-17ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptorMaciej Fijalkowski1-5/+1
The descriptor that ntu is pointing at when we exit ice_alloc_rx_bufs_zc() should not have its corresponding DD bit cleared as descriptor is not allocated in there and it is not valid for HW usage. The allocation routine at the entry will fill the descriptor that ntu points to after it was set to ntu + nb_buffs on previous call. Even the spec says: "The tail pointer should be set to one descriptor beyond the last empty descriptor in host descriptor ring." Therefore, step away from clearing the status_error0 on ntu + nb_buffs descriptor. Fixes: db804cfc21e9 ("ice: Use the xsk batched rx allocation interface") Reported-by: Elza Mathew <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-17ice: remove dead store on XSK hotpathAlexander Lobakin1-1/+0
The 'if (ntu == rx_ring->count)' block in ice_alloc_rx_buffers_zc() was previously residing in the loop, but after introducing the batched interface it is used only to wrap-around the NTU descriptor, thus no more need to assign 'xdp'. Fixes: db804cfc21e9 ("ice: Use the xsk batched rx allocation interface") Signed-off-by: Alexander Lobakin <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-17ice: xsk: allocate separate memory for XDP SW ringMaciej Fijalkowski3-22/+47
Currently, the zero-copy data path is reusing the memory region that was initially allocated for an array of struct ice_rx_buf for its own purposes. This is error prone as it is based on the ice_rx_buf struct always being the same size or bigger than what the zero-copy path needs. There can also be old values present in that array giving rise to errors when the zero-copy path uses it. Fix this by freeing the ice_rx_buf region and allocating a new array for the zero-copy path that has the right length and is initialized to zero. Fixes: 57f7f8b6bc0b ("ice: Use xdp_buf instead of rx_buf for xsk zero-copy") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-17Merge tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds19-20/+45
Pull drm fixes from Dave Airlie: "Mostly amdgpu fixes this week scattered around the driver, otherwise one i915, one ast, one simpledrm. There is a revert in the fb-helper for places userspace was using a string that we tried to change. i915: - Fix a bound check in the DMC fw load. ast: - NULL ptr deref fix simpledrm: - pixel clock units fix fb-helper: - userspace regression revert amdgpu: - Fix RLC register offset - GMC fix - Properly cache SMU FW version on Yellow Carp - Fix missing callback on DCN3.1 - Reset DMCUB before HW init - Fix for GMC powergating on PCO - Fix a possible memory leak in GPU metrics table handling on RN" * tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drm: drm/amd/pm: fix a potential gpu_metrics_table memory leak drm/amdgpu: correct the wrong cached state for GMC on PICASSO drm/amd/display: Reset DMCUB before HW init drm/amd/display: Set exit_optimized_pwr_state for DCN31 drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YC drm/amdgpu: don't override default ECO_BITs setting drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE drm/i915/display: Fix an unsigned subtraction which can never be negative. drm/ast: potential dereference of null pointer drm: simpledrm: fix wrong unit with pixel clock Revert "drm/fb-helper: improve DRM fbdev emulation device names"
Powered by cgit, Gruvboxed by Blaster4385.