| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Put the struct page reference acquired by gfn_to_pfn(), KVM's API is that
the caller is ultimately responsible for dropping any reference.
Note, kvm_release_pfn_clean() ensures the pfn is actually a refcounted
struct page before trying to put any references.
Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Attempt to unpin pages in the error path of gvt_pin_guest_page() if and
only if at least one page was successfully pinned. Unpinning doesn't
cause functional problems, but vfio_device_container_unpin_pages()
rightfully warns about being asked to unpin zero pages.
Signed-off-by: Yan Zhao <[email protected]>
[sean: write changelog]
Reviewed-by: Zhi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When shadowing a GTT entry with a 2M page, verify that the pfns are
contiguous, not just that the struct page pointers are contiguous. The
memory map is virtual contiguous if "CONFIG_FLATMEM=y ||
CONFIG_SPARSEMEM_VMEMMAP=y", but not for "CONFIG_SPARSEMEM=y &&
CONFIG_SPARSEMEM_VMEMMAP=n", so theoretically KVMGT could encounter struct
pages that are virtually contiguous, but not physically contiguous.
In practice, this flaw is likely a non-issue as it would cause functional
problems iff a section isn't 2M aligned _and_ is directly adjacent to
another section with discontiguous pfns.
Tested-by: Yongwei Ma <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Reviewed-by: Yan Zhao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Currently intel_gvt_is_valid_gfn() is called in two places:
(1) shadowing guest GGTT entry
(2) shadowing guest PPGTT leaf entry,
which was introduced in commit cc753fbe1ac4
("drm/i915/gvt: validate gfn before set shadow page entry").
However, now it's not necessary to call this interface any more, because
a. GGTT partial write issue has been fixed by
commit bc0686ff5fad
("drm/i915/gvt: support inconsecutive partial gtt entry write")
commit 510fe10b6180
("drm/i915/gvt: fix a bug of partially write ggtt enties")
b. PPGTT resides in normal guest RAM and we only treat 8-byte writes
as valid page table writes. Any invalid GPA found is regarded as
an error, either due to guest misbehavior/attack or bug in host
shadow code.
So,rather than do GFN pre-checking and replace invalid GFNs with
scratch GFN and continue silently, just remove the pre-checking and
abort PPGTT shadowing on error detected.
c. GFN validity check is still performed in
intel_gvt_dma_map_guest_page() --> gvt_pin_guest_page().
It's more desirable to call VFIO interface to do both validity check
and mapping.
Calling intel_gvt_is_valid_gfn() to do GFN validity check from KVM side
while later mapping the GFN through VFIO interface is unnecessarily
fragile and confusing for unaware readers.
Signed-off-by: Yan Zhao <[email protected]>
[sean: remove now-unused local variables]
Acked-by: Zhi Wang <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Check that the pfn found by gfn_to_pfn() is actually backed by "struct
page" memory prior to retrieving and dereferencing the page. KVM
supports backing guest memory with VM_PFNMAP, VM_IO, etc., and so
there is no guarantee the pfn returned by gfn_to_pfn() has an associated
"struct page".
Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.6
- Add support for TLB range invalidation of Stage-2 page tables,
avoiding unnecessary invalidations. Systems that do not implement
range invalidation still rely on a full invalidation when dealing
with large ranges.
- Add infrastructure for forwarding traps taken from a L2 guest to
the L1 guest, with L0 acting as the dispatcher, another baby step
towards the full nested support.
- Simplify the way we deal with the (long deprecated) 'CPU target',
resulting in a much needed cleanup.
- Fix another set of PMU bugs, both on the guest and host sides,
as we seem to never have any shortage of those...
- Relax the alignment requirements of EL2 VA allocations for
non-stack allocations, as we were otherwise wasting a lot of that
precious VA space.
- The usual set of non-functional cleanups, although I note the lack
of spelling fixes...
|
|
ams.h uses struct platform_device, so the header should be used
to prevent build errors:
drivers/macintosh/ams/ams-input.c: In function 'ams_input_enable':
drivers/macintosh/ams/ams-input.c:68:45: error: invalid use of undefined type 'struct platform_device'
68 | input->dev.parent = &ams_info.of_dev->dev;
drivers/macintosh/ams/ams-input.c: In function 'ams_input_init':
drivers/macintosh/ams/ams-input.c:146:51: error: invalid use of undefined type 'struct platform_device'
146 | return device_create_file(&ams_info.of_dev->dev, &dev_attr_joystick);
drivers/macintosh/ams/ams-input.c: In function 'ams_input_exit':
drivers/macintosh/ams/ams-input.c:151:44: error: invalid use of undefined type 'struct platform_device'
151 | device_remove_file(&ams_info.of_dev->dev, &dev_attr_joystick);
drivers/macintosh/ams/ams-input.c: In function 'ams_input_init':
drivers/macintosh/ams/ams-input.c:147:1: error: control reaches end of non-void function [-Werror=return-type]
147 | }
Fixes: 233d687d1b78 ("macintosh: Explicitly include correct DT includes")
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
The mtd driver has similar problems than the one that was fixed in
commit dc3216b14160 ("super: ensure valid info").
The kill_mtd_super() helper calls shuts the superblock down but leaves
the superblock on fs_supers as the devices are still in use but puts the
mtd device and cleans out the superblock's s_mtd field.
This means another mounter can find the superblock on the list accessing
its s_mtd field while it is curently in the process of being freed or
already freed.
Prevent that from happening by keying superblock by dev_t just as we do
in the generic code.
Link: https://lore.kernel.org/linux-fsdevel/20230829-weitab-lauwarm-49c40fc85863@brauner
Acked-by: Richard Weinberger <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Apple devices fixes by Nimish Gåtam and Nils Tonnaett
|
|
Drop error checking for debugfs_create_file in the wiimote driver
by Osama Muhammad
|
|
Battery fixes by Aaron Armstrong Skomra
|
|
Add support for the Steelseries Arctis 1 XBox headset by Bastien Nocera
|
|
Allow multi-function sensor devices in sensor-hub by Daniel Thompson
|
|
Constify class struct by Ivan Orlov and Greg Kroah-Hartman
|
|
LED fixes and Battery support for the Nvidia Shield by
Rahul Rameshbabu
|
|
Various new device ID addition and a couple of HID++
fixes to tackle the last few opened bugs (Nikita Zhandarovich
and Benjamin Tissoires)
|
|
Add support for Google Stadia force feedback by Fabio Baltieri
|
|
Make use of panel follower for the Ilitek ili9882t
driver by Cong Yang
|
|
Fix a wrong devm attachment to the input device which
now triggers a use after free with a recent devm change
by Rahul Rameshbabu.
|
|
Cleanup of the hid-cp2112 driver by Andy Shevchenko
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Dave Jiang:
"This is mostly small cleanups, fixes, and with a change to prevent
zero-sized namespace exposed to user for nvdimm.
Summary:
- kstrtobool() conversion for nvdimm
- Add REQ_OP_WRITE for virtio_pmem
- Header files update for of_pmem
- Restrict zero-sized namespace from being exposed to user
- Avoid unnecessary endian conversion
- Fix mem leak in nvdimm pmu
- Fix dereference after free in nvdimm pmu"
* tag 'libnvdimm-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Fix dereference after free in register_nvdimm_pmu()
nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
nvdimm/pfn_dev: Avoid unnecessary endian conversion
nvdimm/pfn_dev: Prevent the creation of zero-sized namespaces
nvdimm: Explicitly include correct DT includes
virtio_pmem: add the missing REQ_OP_WRITE for flush bio
nvdimm: Use kstrtobool() instead of strtobool()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"On top of the vfio updates is built some new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that
hold the translation mapping. This is the basic functionality for
the normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors
when emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
that owns a VFIO device. This includes support for the Intel iommu,
and patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kernel APIs: iommufd_ctx_has_group(),
iommufd_device_to_ictx(), iommufd_device_to_id(),
iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some
per-group data
- Reorganize how the internal hwpt allocation flows to have more
robust locking
- Improve the access interfaces to support detach and replace of an
IOAS from an access
- New selftests and a rework of how the selftests creates a mock
iommu driver to be more like a real iommu driver"
Link: https://lore.kernel.org/lkml/ZO%[email protected]/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
iommufd/selftest: Don't leak the platform device memory when unloading the module
iommu/vt-d: Implement hw_info for iommu capability query
iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
iommufd: Add IOMMU_GET_HW_INFO
iommu: Add new iommu op to get iommu hardware information
iommu: Move dev_iommu_ops() to private header
iommufd: Remove iommufd_ref_to_users()
iommufd/selftest: Make the mock iommu driver into a real driver
vfio: Support IO page table replacement
iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
iommufd: Add iommufd_access_replace() API
iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
iommufd: Add iommufd_access_change_ioas(_id) helpers
iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
iommufd/selftest: Return the real idev id from selftest mock_domain
iommufd: Add IOMMU_HWPT_ALLOC
iommufd/selftest: Test iommufd_device_replace()
iommufd: Make destroy_rwsem use a lock class per object type
...
|
|
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Register accessors
for Link Control and Root Control
- Use pci_dev_id() when possible instead of manually composing ID
from dev->bus->number and dev->devfn
Resource management:
- Move prototypes for __weak sysfs resource files to linux/pci.h to
fix 'no previous prototype' warnings
- Make more I/O port accesses depend on HAS_IOPORT
- Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource()
Power management:
- Ensure devices are powered up while accessing VPD
- If device is powered-up, keep it that way while polling for PME
- Only read PCI_PM_CTRL register when available, to avoid reading the
wrong register and corrupting dev->current_state
Virtualization:
- Avoid Secondary Bus Reset on NVIDIA T4 GPUs
Error handling:
- Remove unused pci_disable_pcie_error_reporting()
- Unexport pci_enable_pcie_error_reporting(), used only by aer.c
- Unexport pcie_port_bus_type, used only by PCI core
VGA:
- Simplify and clean up typos in VGA arbiter
Apple PCIe controller driver:
- Initialize pcie->nvecs (number of available MSIs) before use
Broadcom iProc PCIe controller driver:
- Use of_property_read_bool() instead of low-level accessors for
boolean properties
Broadcom STB PCIe controller driver:
- Assert PERST# when probing BCM2711 because some bootloaders don't
do it
Freescale i.MX6 PCIe controller driver:
- Add .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload
Freescale Layerscape PCIe controller driver:
- Add support for link-down notification so the endpoint driver can
process LINK_DOWN events
- Add suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake
- Save Link Capabilities during probe so they can be restored when
handling a link-up event, since the controller loses the Link Width
and Link Speed values during reset
Intel VMD host bridge driver:
- Fix disable of bridge windows during domain reset; previously we
cleared the base/limit registers, which actually left the windows
enabled
Marvell MVEBU PCIe controller driver:
- Remove unused busn member
Microchip PolarFlare PCIe controller driver:
- Fix interrupt bit definitions so the SEC and DED interrupt handlers
work correctly
- Make driver buildable as a module
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them
Microsoft Hyper-V host bridge driver:
- To avoid a NULL pointer dereference, skip MSI restore after
hibernate if MSI/MSI-X hasn't been enabled
NVIDIA Tegra194 PCIe controller driver:
- Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
endpoints below a switch (because other devices below the switch
might already be operating), which leads to 'Malformed TLP' errors
Qualcomm PCIe controller driver:
- Add DT and driver support for interconnect bandwidth voting for
'pcie-mem' and 'cpu-pcie' interconnects
- Fix broken SDX65 'compatible' DT property
- Configure controller so MHI bus master clock will be switched off
while in ASPM L1.x states
- Use alignment restriction from EPF core in EPF MHI driver
- Add Endpoint eDMA support
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driver
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency
- Add sa8775p DT binding and driver support
Rockchip PCIe controller driver:
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
upper 32 bits
SiFive FU740 PCIe controller driver:
- Set the supported number of MSI vectors so we can use all available
MSI interrupts
Synopsys DesignWare PCIe controller driver:
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver
suspend/resume ops, and a controller callback to send PME_Turn_Off
MicroSemi Switchtec management driver:
- Add support for PCIe Gen5 devices
Miscellaneous:
- Reorder and compress to reduce size of struct pci_dev
- Fix race in DOE destroy_work_on_stack()
- Add stubs to avoid casts between incompatible function types
- Explicitly include correct DT includes to untangle headers"
* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
PCI: qcom-ep: Add ICC bandwidth voting support
dt-bindings: PCI: qcom: ep: Add interconnects path
PCI: qcom-ep: Treat unknown IRQ events as an error
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI/PM: Only read PCI_PM_CTRL register when available
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Pass alignment restriction to the EPF core
PCI: Simplify pcie_capability_clear_and_set_word() control flow
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
...
|
|
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull intel EDAC fixes from Tony Luck:
- Old igen6 driver could lose pending events during initialization
- Sapphire Rapids workstations have fewer memory controllers than their
bigger siblings. This confused the driver.
* tag 'edac_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Fix the issue of no error events
EDAC/i10nm: Skip the absent memory controllers
|
|
Pull IPMI updates from Corey Minyard:
"Minor fixes for IPMI
Lots of small unconnected things, memory leaks on error, a possible
(though unlikely) deadlock, changes for updates to other things that
have changed. Nothing earth-shattering, but things that need update"
* tag 'for-linus-6.6-1' of https://github.com/cminyard/linux-ipmi:
ipmi_si: fix -Wvoid-pointer-to-enum-cast warning
ipmi: fix potential deadlock on &kcs_bmc->lock
ipmi_si: fix a memleak in try_smi_init()
ipmi: Change request_module to request_module_nowait
ipmi: make ipmi_class a static const structure
ipmi:ssif: Fix a memory leak when scanning for an adapter
ipmi:ssif: Add check for kstrdup
dt-bindings: ipmi: aspeed,ast2400-kcs-bmc: drop unneeded quotes
ipmi: Switch i2c drivers back to use .probe()
ipmi_watchdog: Fix read syscall not responding to signals during sleep
|
|
RPMB handler
For advanced RPMB requests, its UPIU package should be fully initialized in
its ufs-bsg-based application, except for task tag. in ufshcd.c, we just
copy UPIU (with CDB) request as-is.
Signed-off-by: Bean Huo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
EHS length in UTRD
According to UFSHCI 4.0 specification:
5.2 Host Controller Capabilities Registers
5.2.1 Offset 00h: CAP – Controller Capabilities:
"EHS Length in UTRD Supported (EHSLUTRDS): Indicates whether the host
controller supports EHS Length field in UTRD.
0 – Host controller takes EHS length from CMD UPIU, and SW driver use EHS
Length field in CMD UPIU.
1 – HW controller takes EHS length from UTRD, and SW driver use EHS
Length field in UTRD.
NOTE Recommend Host controllers move to taking EHS length from UTRD, and
in UFS-5, it will be mandatory."
So, when UFSHCI 4.0 doesn't support EHS Length field in UTRD, we could use
EHS Length field in CMD UPIU. Remove the limitation that advanced RPMB only
works when EHS length is supported in UTRD.
Fixes: 6ff265fc5ef6 ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Co-developed-by: "jonghwi.rha" <[email protected]>
Signed-off-by: "jonghwi.rha" <[email protected]>
Signed-off-by: Bean Huo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Remove reduntant volatile qualifier.
Signed-off-by: Ranjan Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The driver retries certain register reads 3 times if the returned value is
0. This was done because the controller could return 0 for certain
registers if other registers were being accessed concurrently by the BMC.
In certain systems with increased BMC interactions, the register values
returned can be 0 for longer than 3 retries. Change the retry count from 3
to 30 for the affected registers to prevent problems with out-of-band
management.
Fixes: b899202901a8 ("scsi: mpt3sas: Add separate function for aero doorbell reads")
Cc: [email protected]
Signed-off-by: Ranjan Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
It is backwards compatible
Signed-off-by: Oliver Neukum <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Alexander Stein reports that commit a014c35556b9 ("net: stmmac: clarify
difference between "interface" and "phy_interface"") caused breakage,
because plat->mac_interface will never be negative. Fix this by using
the "rc" temporary variable in stmmac_probe_config_dt().
Reported-by: Alexander Stein <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Tested-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
sas_queue_reset() is always called with param "wait" set to 0, so remove it
from this function's parameter list. Also remove unused function
sas_wait_eh().
Signed-off-by: Wenchao Hao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When CONFIG_NVME_FC is not set, fcport is unused:
drivers/scsi/qla2xxx/qla_nvme.c: In function 'qla2xxx_process_purls_pkt':
drivers/scsi/qla2xxx/qla_nvme.c:1183:20: warning: unused variable 'fcport' [-Wunused-variable]
1183 | fc_port_t *fcport = uctx->fcport;
| ^~~~~~
While this preprocessor usage could be converted to a normal if
statement to allow the compiler to always see fcport as used, it is
equally easy to just eliminate the fcport variable and use uctx->fcport
directly.
Fixes: 27177862de96 ("scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error")
Reported-by: Stephen Rothwell <[email protected]>
Closes: https://lore.kernel.org/linux-next/[email protected]/
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Nilesh Javali <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The functions fnic_scsi_host_start_tag() and fnic_scsi_host_end_tag() are
not used anywhere, so remove them.
silence the warnings:
drivers/scsi/fnic/fnic_scsi.c:2175:1: warning: unused function 'fnic_scsi_host_start_tag'
drivers/scsi/fnic/fnic_scsi.c:2196:1: warning: unused function 'fnic_scsi_host_end_tag'
Signed-off-by: Yang Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Karan Tilak Kumar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
There is a spelling mistake in a ql_dbg message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull in the fixes tree for a commit that missed 6.5. Also resolve a
trivial merge conflict in fnic.
* 6.5/scsi-fixes: (36 commits)
scsi: storvsc: Handle additional SRB status values
scsi: snic: Fix double free in snic_tgt_create()
scsi: core: raid_class: Remove raid_component_add()
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
scsi: ufs: mcq: Fix the search/wrap around logic
scsi: qedf: Fix firmware halt over suspend and resume
scsi: qedi: Fix firmware halt over suspend and resume
scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
scsi: lpfc: Remove reftag check in DIF paths
scsi: ufs: renesas: Fix private allocation
scsi: snic: Fix possible memory leak if device_add() fails
scsi: core: Fix possible memory leak if device_add() fails
scsi: core: Fix legacy /proc parsing buffer overflow
scsi: 53c700: Check that command slot is not NULL
scsi: fnic: Replace return codes in fnic_clean_pending_aborts()
scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
scsi: pm80xx: Fix error return code in pm8001_pci_probe()
scsi: zfcp: Defer fc_rport blocking until after ADISC response
scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
scsi: sg: Fix checking return value of blk_get_queue()
...
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree include cleanups from Rob Herring:
"These are the remaining few clean-ups of DT related includes which
didn't get applied to subsystem trees"
* tag 'devicetree-header-cleanups-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ipmi: Explicitly include correct DT includes
tpm: Explicitly include correct DT includes
lib/genalloc: Explicitly include correct DT includes
parport: Explicitly include correct DT includes
sbus: Explicitly include correct DT includes
mux: Explicitly include correct DT includes
macintosh: Explicitly include correct DT includes
hte: Explicitly include correct DT includes
EDAC: Explicitly include correct DT includes
clocksource: Explicitly include correct DT includes
sparc: Explicitly include correct DT includes
riscv: Explicitly include correct DT includes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
|
|
Pull ARM SoC cleanups from Arnd Bergmann:
"These are all minor cleanups for platform specific code in arch/arm/
and some of the associated drivers. The majority of these are work
done by Rob Herring to improve the way devicetreee header files are
handled"
* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
ARM: davinci: Drop unused includes
ARM: s5pv210: Explicitly include correct DT includes
ARM: dove: Drop unused includes
ARM: mvebu: Explicitly include correct DT includes
Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
MAINTAINER: samsung: document dtbs_check requirement for Samsung
Documentation/process: maintainer-soc: add clean platforms profile
MAINTAINERS: soc: reference maintainer profile
ARM: nspire: Remove unused header file mmio.h
ARM: nspire: Use syscon-reboot to handle restart
soc: fsl: Explicitly include correct DT includes
soc: xilinx: Explicitly include correct DT includes
soc: sunxi: Explicitly include correct DT includes
soc: rockchip: Explicitly include correct DT includes
soc: mediatek: Explicitly include correct DT includes
soc: aspeed: Explicitly include correct DT includes
firmware: Explicitly include correct DT includes
bus: Explicitly include correct DT includes
ARM: spear: Explicitly include correct DT includes
ARM: mvebu: Explicitly include correct DT includes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power domain providers in
drivers/genpd and starts moving some of the corresponding code in
there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the
soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
better overall view of what goes on in the area, I will help out with
maintenance"
[ I find the "genpd" name singularly uninformative, so we'll probably
end up moving this driver subsystem somewhere else, but that's still
being discussed - Linus ]
* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
genpd: ti: Use for_each_node_with_property() simplify code logic
genpd: Explicitly include correct DT includes
genpd: imx: scu-pd: initialize is_off according to HW state
genpd: imx: scu-pd: Suppress bind attrs
genpd: imx: scu-pd: do not power off console if no_console_suspend
genpd: imx: scu-pd: add more PDs
genpd: imx: scu-pd: enlarge PD range
genpd: imx: relocate scu-pd under genpd
MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
genpd: Makefile: build imx
genpd: move owl-sps-helper.c from drivers/soc
soc: starfive: remove stale Makefile entry
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
...
|
|
Prepare input updates for 6.6 merge window.
|
|
nouveau_fence_emit() can fail before and after initializing the
dma-fence and hence before and after initializing the dma-fence' kref.
In order to avoid nouveau_fence_emit() potentially failing before
dma-fence initialization pass the channel to nouveau_fence_new() already
and perform the required check before even allocating the fence.
While at it, restore the original behavior of nouveau_fence_new() and
add nouveau_fence_create() for separate (pre-)allocation instead. Always
splitting up allocation end emit wasn't a good idea in the first place.
Hence, limit it to the places where we actually need to pre-allocate.
Fixes: 7f2a0b50b2b2 ("drm/nouveau: fence: separate fence alloc and emit")
Signed-off-by: Danilo Krummrich <[email protected]>
Reviewed-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
* clk-qcom: (87 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
clk: qcom: gcc-ipq5018: change some variable static
clk: qcom: gcc-ipq4019: add missing networking resets
dt-bindings: clock: qcom: ipq4019: add missing networking resets
clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
clk: qcom: gcc-qdu1000: Update the RCGs ops
clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
clk: qcom: gcc-qdu1000: Add support for GDSCs
clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
clk: qcom: gcc-qdu1000: Fix clkref clocks handling
clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
clk: qcom: ipq5332: drop the mem noc clocks
clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
...
|
|
'clk-lmk' into clk-next
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Remove non-OF mmp clk drivers
- Move number of clks from DT headers to drivers
* clk-imx:
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
clk: imx: pll14xx: align pdiv with reference manual
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
clk: imx25: make __mx25_clocks_init return void
clk: imx25: print silicon revision during init
dt-bindings: clocks: imx8mp: make sai4 a dummy clock
clk: imx8mp: fix sai4 clock
clk: imx: imx8ulp: update SPLL2 type
clk: imx: pllv4: Fix SPLL2 MULT range
clk: imx: imx8: add audio clock mux driver
dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
clk: imx: clk-gpr-mux: Simplify .determine_rate()
clk: imx: Add 519.75MHz frequency support for imx9 pll
clk: imx93: Add PDM IPG clk
dt-bindings: clock: imx93: Add PDM IPG clk
* clk-samsung:
dt-bindings: clock: samsung: remove define with number of clocks
clk: samsung: exynoautov9: do not define number of clocks in bindings
clk: samsung: exynos850: do not define number of clocks in bindings
clk: samsung: exynos7885: do not define number of clocks in bindings
clk: samsung: exynos5433: do not define number of clocks in bindings
clk: samsung: exynos5420: do not define number of clocks in bindings
clk: samsung: exynos5410: do not define number of clocks in bindings
clk: samsung: exynos5260: do not define number of clocks in bindings
clk: samsung: exynos5250: do not define number of clocks in bindings
clk: samsung: exynos4: do not define number of clocks in bindings
clk: samsung: exynos3250: do not define number of clocks in bindings
* clk-annotate:
clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
clk: Annotate struct clk_hw_onecell_data with __counted_by
* clk-marvell:
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
clk: mmp: Remove old non-OF clock drivers
* clk-lmk:
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
|